From: Tetsuya Mukawa Date: Wed, 25 Feb 2015 19:32:23 +0000 (+0900) Subject: pci: probe or close device X-Git-Tag: spdx-start~9535 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=dbe6b4b61b0e;p=dpdk.git pci: probe or close device - Add pci_close_all_drivers() The function tries to find a driver for the specified device, and then close the driver. - Add rte_eal_pci_probe_one() and rte_eal_pci_close_one() The functions are used for probe and close a device. First the function tries to find a device that has the specified PCI address. Then, probe or close the device. Signed-off-by: Tetsuya Mukawa --- diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c index bf2793f9e8..5b6b55db22 100644 --- a/lib/librte_eal/common/eal_common_pci.c +++ b/lib/librte_eal/common/eal_common_pci.c @@ -108,7 +108,10 @@ static int pci_probe_all_drivers(struct rte_pci_device *dev) { struct rte_pci_driver *dr = NULL; - int rc; + int rc = 0; + + if (dev == NULL) + return -1; TAILQ_FOREACH(dr, &pci_driver_list, next) { rc = rte_eal_pci_probe_one_driver(dr, dev); @@ -123,6 +126,99 @@ pci_probe_all_drivers(struct rte_pci_device *dev) return 1; } +#ifdef RTE_LIBRTE_EAL_HOTPLUG +/* + * If vendor/device ID match, call the devuninit() function of all + * registered driver for the given device. Return -1 if initialization + * failed, return 1 if no driver is found for this device. + */ +static int +pci_close_all_drivers(struct rte_pci_device *dev) +{ + struct rte_pci_driver *dr = NULL; + int rc = 0; + + if (dev == NULL) + return -1; + + TAILQ_FOREACH(dr, &pci_driver_list, next) { + rc = rte_eal_pci_close_one_driver(dr, dev); + if (rc < 0) + /* negative value is an error */ + return -1; + if (rc > 0) + /* positive value means driver not found */ + continue; + return 0; + } + return 1; +} + +/* + * Find the pci device specified by pci address, then invoke probe function of + * the driver of the devive. + */ +int +rte_eal_pci_probe_one(struct rte_pci_addr *addr) +{ + struct rte_pci_device *dev = NULL; + int ret = 0; + + if (addr == NULL) + return -1; + + TAILQ_FOREACH(dev, &pci_device_list, next) { + if (rte_eal_compare_pci_addr(&dev->addr, addr)) + continue; + + ret = pci_probe_all_drivers(dev); + if (ret < 0) + goto err_return; + return 0; + } + return -1; + +err_return: + RTE_LOG(WARNING, EAL, "Requested device " PCI_PRI_FMT + " cannot be used\n", dev->addr.domain, dev->addr.bus, + dev->addr.devid, dev->addr.function); + return -1; +} + +/* + * Find the pci device specified by pci address, then invoke close function of + * the driver of the devive. + */ +int +rte_eal_pci_close_one(struct rte_pci_addr *addr) +{ + struct rte_pci_device *dev = NULL; + int ret = 0; + + if (addr == NULL) + return -1; + + TAILQ_FOREACH(dev, &pci_device_list, next) { + if (rte_eal_compare_pci_addr(&dev->addr, addr)) + continue; + + ret = pci_close_all_drivers(dev); + if (ret < 0) + goto err_return; + + TAILQ_REMOVE(&pci_device_list, dev, next); + return 0; + } + return -1; + +err_return: + RTE_LOG(WARNING, EAL, "Requested device " PCI_PRI_FMT + " cannot be used\n", dev->addr.domain, dev->addr.bus, + dev->addr.devid, dev->addr.function); + return -1; +} +#endif /* RTE_LIBRTE_EAL_HOTPLUG */ + /* * Scan the content of the PCI bus, and call the devinit() function for * all registered drivers that have a matching entry in its id_table diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h index 159cd669a2..4acf5a0f89 100644 --- a/lib/librte_eal/common/eal_private.h +++ b/lib/librte_eal/common/eal_private.h @@ -164,6 +164,21 @@ struct rte_pci_device; int rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev); +/** + * Munmap memory for single PCI device + * + * This function is private to EAL. + * + * @param dr + * The pointer to the pci driver structure + * @param dev + * The pointer to the pci device structure + * @return + * 0 on success, negative on error + */ +int rte_eal_pci_close_one_driver(struct rte_pci_driver *dr, + struct rte_pci_device *dev); + /** * Init tail queues for non-EAL library structures. This is to allow * the rings, mempools, etc. lists to be shared among multiple processes diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h index ec2e2b03f0..1550d49d85 100644 --- a/lib/librte_eal/common/include/rte_pci.h +++ b/lib/librte_eal/common/include/rte_pci.h @@ -191,6 +191,11 @@ struct rte_pci_driver; */ typedef int (pci_devinit_t)(struct rte_pci_driver *, struct rte_pci_device *); +/** + * Uninitialisation function for the driver called during hotplugging. + */ +typedef int (pci_devuninit_t)(struct rte_pci_device *); + /** * A structure describing a PCI driver. */ @@ -198,6 +203,7 @@ struct rte_pci_driver { TAILQ_ENTRY(rte_pci_driver) next; /**< Next in list. */ const char *name; /**< Driver name. */ pci_devinit_t *devinit; /**< Device init. function. */ + pci_devuninit_t *devuninit; /**< Device uninit function. */ struct rte_pci_id *id_table; /**< ID table, NULL terminated. */ uint32_t drv_flags; /**< Flags contolling handling of device. */ }; @@ -317,6 +323,38 @@ rte_eal_compare_pci_addr(struct rte_pci_addr *addr, struct rte_pci_addr *addr2) */ int rte_eal_pci_probe(void); +#ifdef RTE_LIBRTE_EAL_HOTPLUG +/** + * Probe the single PCI device. + * + * Scan the content of the PCI bus, and find the pci device specified by pci + * address, then call the probe() function for registered driver that has a + * matching entry in its id_table for discovered device. + * + * @param addr + * The PCI Bus-Device-Function address to probe. + * @return + * - 0 on success. + * - Negative on error. + */ +int rte_eal_pci_probe_one(struct rte_pci_addr *addr); + +/** + * Close the single PCI device. + * + * Scan the content of the PCI bus, and find the pci device specified by pci + * address, then call the close() function for registered driver that has a + * matching entry in its id_table for discovered device. + * + * @param addr + * The PCI Bus-Device-Function address to close. + * @return + * - 0 on success. + * - Negative on error. + */ +int rte_eal_pci_close_one(struct rte_pci_addr *addr); +#endif /* RTE_LIBRTE_EAL_HOTPLUG */ + /** * Dump the content of the PCI bus. * diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c index d03429cb24..f880f90d3e 100644 --- a/lib/librte_eal/linuxapp/eal/eal_pci.c +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c @@ -595,6 +595,31 @@ pci_map_device(struct rte_pci_device *dev) return ret; } +#ifdef RTE_LIBRTE_EAL_HOTPLUG +static void +pci_unmap_device(struct rte_pci_device *dev) +{ + if (dev == NULL) + return; + + /* try unmapping the NIC resources using VFIO if it exists */ + switch (dev->pt_driver) { + case RTE_PT_VFIO: + RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n"); + break; + case RTE_PT_IGB_UIO: + case RTE_PT_UIO_GENERIC: + /* unmap resources for devices that use uio */ + pci_uio_unmap_resource(dev); + break; + default: + RTE_LOG(DEBUG, EAL, " Not managed by known pt driver," + " skipped\n"); + break; + } +} +#endif /* RTE_LIBRTE_EAL_HOTPLUG */ + /* * If vendor/device ID match, call the devinit() function of the * driver. @@ -666,6 +691,75 @@ rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *d return 1; } +#ifdef RTE_LIBRTE_EAL_HOTPLUG +/* + * If vendor/device ID match, call the devuninit() function of the + * driver. + */ +int +rte_eal_pci_close_one_driver(struct rte_pci_driver *dr, + struct rte_pci_device *dev) +{ + struct rte_pci_id *id_table; + + if ((dr == NULL) || (dev == NULL)) + return -EINVAL; + + for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) { + + /* check if device's identifiers match the driver's ones */ + if (id_table->vendor_id != dev->id.vendor_id && + id_table->vendor_id != PCI_ANY_ID) + continue; + if (id_table->device_id != dev->id.device_id && + id_table->device_id != PCI_ANY_ID) + continue; + if (id_table->subsystem_vendor_id != + dev->id.subsystem_vendor_id && + id_table->subsystem_vendor_id != PCI_ANY_ID) + continue; + if (id_table->subsystem_device_id != + dev->id.subsystem_device_id && + id_table->subsystem_device_id != PCI_ANY_ID) + continue; + + struct rte_pci_addr *loc = &dev->addr; + + RTE_LOG(DEBUG, EAL, + "PCI device "PCI_PRI_FMT" on NUMA socket %i\n", + loc->domain, loc->bus, loc->devid, + loc->function, dev->numa_node); + + RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n", + dev->id.vendor_id, dev->id.device_id, + dr->name); + + /* call the driver devuninit() function */ + if (dr->devuninit && (dr->devuninit(dev) < 0)) + return -1; /* negative value is an error */ + + /* clear driver structure */ + dev->driver = NULL; + + if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) + /* unmap resources for devices that use igb_uio */ + pci_unmap_device(dev); + + return 0; + } + /* return positive value if driver is not found */ + return 1; +} +#else /* RTE_LIBRTE_EAL_HOTPLUG */ +int +rte_eal_pci_close_one_driver(struct rte_pci_driver *dr __rte_unused, + struct rte_pci_device *dev __rte_unused) +{ + RTE_LOG(ERR, EAL, "Hotplug support isn't enabled\n"); + return -1; +} +#endif /* RTE_LIBRTE_EAL_HOTPLUG */ + /* Init the PCI EAL subsystem */ int rte_eal_pci_init(void) diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map index 17515a9003..5478492460 100644 --- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map +++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map @@ -38,8 +38,10 @@ DPDK_2.0 { rte_eal_lcore_role; rte_eal_mp_remote_launch; rte_eal_mp_wait_lcore; + rte_eal_pci_close_one; rte_eal_pci_dump; rte_eal_pci_probe; + rte_eal_pci_probe_one; rte_eal_pci_register; rte_eal_pci_unregister; rte_eal_process_type;