From: Shahaf Shuler Date: Tue, 15 May 2018 06:12:50 +0000 (+0300) Subject: net/mlx5: add Bluefield device id X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=dd3331c6f1ced718bc1634924b35849cc4ffbd70;p=dpdk.git net/mlx5: add Bluefield device id Signed-off-by: Shahaf Shuler Acked-by: Nelio Laranjeiro --- diff --git a/config/common_base b/config/common_base index c4dba709d1..6b0d1cbbb7 100644 --- a/config/common_base +++ b/config/common_base @@ -295,7 +295,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n # -# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD +# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield +# (MLX5) PMD # CONFIG_RTE_LIBRTE_MLX5_PMD=n CONFIG_RTE_LIBRTE_MLX5_DEBUG=n diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index a7d5c90bcf..1ec5bcde9d 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -6,9 +6,9 @@ MLX5 poll mode driver ===================== The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support -for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox -ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their -virtual functions (VF) in SR-IOV context. +for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox +ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s +adapters as well as their virtual functions (VF) in SR-IOV context. Information and documentation about these adapters can be found on the `Mellanox website `__. Help is also provided by the @@ -237,8 +237,8 @@ Run-time configuration Supported on: - - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5. - - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5. + - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield. + - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield. - ``mprq_en`` parameter [int] @@ -304,34 +304,35 @@ Run-time configuration This option should be used in combination with ``txq_inline`` above. - On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW: + On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without + Enhanced MPW: - Disabled by default. - In case ``txq_inline`` is set recommendation is 4. - On ConnectX-5 with Enhanced MPW: + On ConnectX-5 and Bluefield with Enhanced MPW: - Set to 8 by default. - ``txq_mpw_en`` parameter [int] A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and - enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the - TX burst function to pack up multiple packets in a single descriptor - session in order to save PCI bandwidth and improve performance at the - cost of a slightly higher CPU usage. When ``txq_inline`` is set along - with ``txq_mpw_en``, TX burst function tries to copy entire packet data - on to TX descriptor instead of including pointer of packet only if there - is enough room remained in the descriptor. ``txq_inline`` sets - per-descriptor space for either pointers or inlined packets. In addition, - Enhanced MPS supports hybrid mode - mixing inlined packets and pointers - in the same descriptor. + enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefield. + MPS allows the TX burst function to pack up multiple packets in a + single descriptor session in order to save PCI bandwidth and improve + performance at the cost of a slightly higher CPU usage. When + ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries + to copy entire packet data on to TX descriptor instead of including + pointer of packet only if there is enough room remained in the + descriptor. ``txq_inline`` sets per-descriptor space for either pointers + or inlined packets. In addition, Enhanced MPS supports hybrid mode - + mixing inlined packets and pointers in the same descriptor. This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - It is currently only supported on the ConnectX-4 Lx and ConnectX-5 + It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield families of adapters. Enabled by default. - ``txq_mpw_hdr_dseg_en`` parameter [int] @@ -352,14 +353,14 @@ Run-time configuration - ``tx_vec_en`` parameter [int] - A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of + A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS. This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - Enabled by default on ConnectX-5. + Enabled by default on ConnectX-5 and Bluefield. - ``rx_vec_en`` parameter [int] @@ -422,8 +423,9 @@ DPDK and must be installed separately: - **libmlx5** - Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5 - devices, it is automatically loaded by libibverbs. + Low-level user space driver library for Mellanox + ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded + by libibverbs. This library basically implements send/receive calls to the hardware queues. @@ -437,15 +439,16 @@ DPDK and must be installed separately: Unlike most other PMDs, these modules must remain loaded and bound to their devices: - - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5 - devices and related Ethernet kernel network devices. + - mlx5_core: hardware driver managing Mellanox + ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel + network devices. - mlx5_ib: InifiniBand device driver. - ib_uverbs: user space driver for Verbs (entry point for libibverbs). - **Firmware update** - Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5 - adapters. + Mellanox OFED releases include firmware updates for + ConnectX-4/ConnectX-5/Bluefield adapters. Because each release provides new features, these updates must be applied to match the kernel modules and libraries they come with. @@ -482,6 +485,7 @@ Mellanox OFED - ConnectX-4 Lx: **14.21.1000** and above. - ConnectX-5: **16.21.1000** and above. - ConnectX-5 Ex: **16.21.1000** and above. + - Bluefield: **18.99.3950** and above. While these libraries and kernel modules are available on OpenFabrics Alliance's `website `__ and provided by package @@ -699,7 +703,7 @@ Usage example ------------- This section demonstrates how to launch **testpmd** with Mellanox -ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5. +ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5. #. Load the kernel modules: diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index f455ea8eaa..8e0445e3ce 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -1247,6 +1247,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) }, + { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) + }, { .vendor_id = 0 } diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index c4c962b92d..a9c692555e 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -50,6 +50,7 @@ enum { PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018, PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019, PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2, }; LIST_HEAD(mlx5_dev_list, priv);