From: Tianfei Zhang Date: Thu, 14 Nov 2019 09:02:53 +0000 (+0800) Subject: raw/ifpga/base: support device tree X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=e1defba4cf66;p=dpdk.git raw/ifpga/base: support device tree In PAC N3000 card, this is a BMC chip which using MAX10 FPGA to manage the board configuration, like sensors, flash controller, QSFP, powers. And this is a SPI bus connected between A10 FPGA and MAX10, we can access the MAX10 registers over this SPI bus. In BMC, there are about 19 sensors in MAX10 chip, including the FPGA core temperature, Board temperature, board current, voltage and so on. We use DTB (Device tree table) to describe it. This DTB file is store in nor flash partition, which will flashed in Factory when the boards delivery to customers. And the same time, the customers can easy to customize the BMC configuration like change the sensors. Add device tree support by using libfdt library in Linux distribution. The end-user should pre-install the libfdt and libfdt-devel package before use DPDK on PAC N3000 Card. For Centos 7.x: sudo yum install libfdt libfdt-devel For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1 To eliminate build error, we currently do not compile raw/ifpga and net/ipn3ke. User should install libfdt and libfdt-devel first, modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base, CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y. Then this function can work. Signed-off-by: Tianfei Zhang Signed-off-by: Andy Pei Acked-by: Bruce Richardson --- diff --git a/config/common_base b/config/common_base index 36ab13df7f..7c015f932f 100644 --- a/config/common_base +++ b/config/common_base @@ -347,7 +347,7 @@ CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n # # Compile burst-oriented IPN3KE PMD driver # -CONFIG_RTE_LIBRTE_IPN3KE_PMD=y +CONFIG_RTE_LIBRTE_IPN3KE_PMD=n # # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD diff --git a/config/common_linux b/config/common_linux index a78b8c6a5f..c5cf3d6628 100644 --- a/config/common_linux +++ b/config/common_linux @@ -73,4 +73,4 @@ CONFIG_RTE_LIBRTE_HNS3_PMD=y # Compile PMD for Intel FPGA raw device # To compile, CONFIG_RTE_EAL_VFIO should be enabled. # -CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y +CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n diff --git a/drivers/meson.build b/drivers/meson.build index 823e3ef839..b7fdfb7357 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -9,12 +9,12 @@ endif dpdk_driver_classes = ['common', 'bus', 'mempool', # depends on common and bus. - 'net', # depends on common, bus and mempool. + 'raw', # depends on common and bus. + 'net', # depends on common, bus, mempool and raw. 'crypto', # depends on common, bus and mempool (net in future). 'compress', # depends on common, bus, mempool. 'event', # depends on common, bus, mempool and net. - 'baseband', # depends on common and bus. - 'raw'] # depends on common, bus, mempool, net and event. + 'baseband'] # depends on common and bus. disabled_drivers = get_option('disable_drivers').split(',') diff --git a/drivers/net/ipn3ke/meson.build b/drivers/net/ipn3ke/meson.build index 74b4d7c250..e3c8a6768c 100644 --- a/drivers/net/ipn3ke/meson.build +++ b/drivers/net/ipn3ke/meson.build @@ -8,10 +8,22 @@ # rte_eth_dev_destroy() # rte_eth_switch_domain_free() # -allow_experimental_apis = true -sources += files('ipn3ke_ethdev.c', - 'ipn3ke_representor.c', - 'ipn3ke_tm.c', - 'ipn3ke_flow.c') -deps += ['bus_ifpga', 'sched'] +dep = dependency('libfdt', required: false) +if not dep.found() + dep = cc.find_library('libfdt', required: false) +endif +if not dep.found() + build = false + reason = 'missing dependency, "libfdt"' +endif + +if build + allow_experimental_apis = true + + sources += files('ipn3ke_ethdev.c', + 'ipn3ke_representor.c', + 'ipn3ke_tm.c', + 'ipn3ke_flow.c') + deps += ['bus_ifpga', 'sched', 'pmd_i40e', 'rawdev', 'rawdev_ifpga'] +endif diff --git a/drivers/raw/ifpga/base/meson.build b/drivers/raw/ifpga/base/meson.build index 69f6598863..b13e13e894 100644 --- a/drivers/raw/ifpga/base/meson.build +++ b/drivers/raw/ifpga/base/meson.build @@ -25,5 +25,5 @@ sources = [ base_lib = static_library('ifpga_rawdev_base', sources, dependencies: static_rte_eal, - c_args: c_args) + c_args: cflags) base_objs = base_lib.extract_all_objects() diff --git a/drivers/raw/ifpga/base/opae_intel_max10.c b/drivers/raw/ifpga/base/opae_intel_max10.c index 9ed10e282c..305baba8d4 100644 --- a/drivers/raw/ifpga/base/opae_intel_max10.c +++ b/drivers/raw/ifpga/base/opae_intel_max10.c @@ -3,6 +3,7 @@ */ #include "opae_intel_max10.h" +#include static struct intel_max10_device *g_max10; @@ -26,6 +27,174 @@ int max10_reg_write(unsigned int reg, unsigned int val) reg, 4, (unsigned char *)&tmp); } +static struct max10_compatible_id max10_id_table[] = { + {.compatible = MAX10_PAC,}, + {.compatible = MAX10_PAC_N3000,}, + {.compatible = MAX10_PAC_END,} +}; + +static struct max10_compatible_id *max10_match_compatible(const char *fdt_root) +{ + struct max10_compatible_id *id = max10_id_table; + + for (; strcmp(id->compatible, MAX10_PAC_END); id++) { + if (fdt_node_check_compatible(fdt_root, 0, id->compatible)) + continue; + + return id; + } + + return NULL; +} + +static inline bool +is_max10_pac_n3000(struct intel_max10_device *max10) +{ + return max10->id && !strcmp(max10->id->compatible, + MAX10_PAC_N3000); +} + +static void max10_check_capability(struct intel_max10_device *max10) +{ + if (!max10->fdt_root) + return; + + if (is_max10_pac_n3000(max10)) { + max10->flags |= MAX10_FLAGS_NO_I2C2 | + MAX10_FLAGS_NO_BMCIMG_FLASH; + dev_info(max10, "found %s card\n", max10->id->compatible); + } +} + +static int altera_nor_flash_read(u32 offset, + void *buffer, u32 len) +{ + int word_len; + int i; + unsigned int *buf = (unsigned int *)buffer; + unsigned int value; + int ret; + + if (!buffer || len <= 0) + return -ENODEV; + + word_len = len/4; + + for (i = 0; i < word_len; i++) { + ret = max10_reg_read(offset + i*4, + &value); + if (ret) + return -EBUSY; + + *buf++ = value; + } + + return 0; +} + +static int enable_nor_flash(bool on) +{ + unsigned int val = 0; + int ret; + + ret = max10_reg_read(RSU_REG_OFF, &val); + if (ret) { + dev_err(NULL "enabling flash error\n"); + return ret; + } + + if (on) + val |= RSU_ENABLE; + else + val &= ~RSU_ENABLE; + + return max10_reg_write(RSU_REG_OFF, val); +} + +static int init_max10_device_table(struct intel_max10_device *max10) +{ + struct max10_compatible_id *id; + struct fdt_header hdr; + char *fdt_root = NULL; + + u32 dt_size, dt_addr, val; + int ret; + + ret = max10_reg_read(DT_AVAIL_REG_OFF, &val); + if (ret) { + dev_err(max10 "cannot read DT_AVAIL_REG\n"); + return ret; + } + + if (!(val & DT_AVAIL)) { + dev_err(max10 "DT not available\n"); + return -EINVAL; + } + + ret = max10_reg_read(DT_BASE_ADDR_REG_OFF, &dt_addr); + if (ret) { + dev_info(max10 "cannot get base addr of device table\n"); + return ret; + } + + ret = enable_nor_flash(true); + if (ret) { + dev_err(max10 "fail to enable flash\n"); + return ret; + } + + ret = altera_nor_flash_read(dt_addr, &hdr, sizeof(hdr)); + if (ret) { + dev_err(max10 "read fdt header fail\n"); + goto done; + } + + ret = fdt_check_header(&hdr); + if (ret) { + dev_err(max10 "check fdt header fail\n"); + goto done; + } + + dt_size = fdt_totalsize(&hdr); + if (dt_size > DFT_MAX_SIZE) { + dev_err(max10 "invalid device table size\n"); + ret = -EINVAL; + goto done; + } + + fdt_root = opae_malloc(dt_size); + if (!fdt_root) { + ret = -ENOMEM; + goto done; + } + + ret = altera_nor_flash_read(dt_addr, fdt_root, dt_size); + if (ret) { + dev_err(max10 "cannot read device table\n"); + goto done; + } + + id = max10_match_compatible(fdt_root); + if (!id) { + dev_err(max10 "max10 compatible not found\n"); + ret = -ENODEV; + goto done; + } + + max10->flags |= MAX10_FLAGS_DEVICE_TABLE; + + max10->id = id; + max10->fdt_root = fdt_root; + +done: + ret = enable_nor_flash(false); + + if (ret && fdt_root) + opae_free(fdt_root); + + return ret; +} + struct intel_max10_device * intel_max10_device_probe(struct altera_spi_device *spi, int chipselect) @@ -49,6 +218,15 @@ intel_max10_device_probe(struct altera_spi_device *spi, /* set the max10 device firstly */ g_max10 = dev; + /* init the MAX10 device table */ + ret = init_max10_device_table(dev); + if (ret) { + dev_err(dev, "init max10 device table fail\n"); + goto free_dev; + } + + max10_check_capability(dev); + /* read FPGA loading information */ ret = max10_reg_read(FPGA_PAGE_INFO_OFF, &val); if (ret) { @@ -60,6 +238,8 @@ intel_max10_device_probe(struct altera_spi_device *spi, return dev; spi_tran_fail: + if (dev->fdt_root) + opae_free(dev->fdt_root); spi_transaction_remove(dev->spi_tran_dev); free_dev: g_max10 = NULL; @@ -76,6 +256,9 @@ int intel_max10_device_remove(struct intel_max10_device *dev) if (dev->spi_tran_dev) spi_transaction_remove(dev->spi_tran_dev); + if (dev->fdt_root) + opae_free(dev->fdt_root); + g_max10 = NULL; opae_free(dev); diff --git a/drivers/raw/ifpga/base/opae_intel_max10.h b/drivers/raw/ifpga/base/opae_intel_max10.h index 08b387e8b7..a52b63e18e 100644 --- a/drivers/raw/ifpga/base/opae_intel_max10.h +++ b/drivers/raw/ifpga/base/opae_intel_max10.h @@ -8,6 +8,14 @@ #include "opae_osdep.h" #include "opae_spi.h" +struct max10_compatible_id { + char compatible[128]; +}; + +#define MAX10_PAC "intel,max10" +#define MAX10_PAC_N3000 "intel,max10-pac-n3000" +#define MAX10_PAC_END "intel,end" + /* max10 capability flags */ #define MAX10_FLAGS_NO_I2C2 BIT(0) #define MAX10_FLAGS_NO_BMCIMG_FLASH BIT(1) @@ -20,6 +28,8 @@ struct intel_max10_device { unsigned int flags; /*max10 hardware capability*/ struct altera_spi_device *spi_master; struct spi_transaction_dev *spi_tran_dev; + struct max10_compatible_id *id; /*max10 compatible*/ + char *fdt_root; }; /* retimer speed */ diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build index 0ab6fd7110..69debff1fe 100644 --- a/drivers/raw/ifpga/meson.build +++ b/drivers/raw/ifpga/meson.build @@ -3,18 +3,27 @@ version = 1 -subdir('base') -objs = [base_objs] - dep = dependency('libfdt', required: false) +if not dep.found() + dep = cc.find_library('libfdt', required: false) +endif if not dep.found() build = false reason = 'missing dependency, "libfdt"' endif -deps += ['rawdev', 'pci', 'bus_pci', 'kvargs', - 'bus_vdev', 'bus_ifpga', 'net'] -sources = files('ifpga_rawdev.c') -includes += include_directories('base') +if build + subdir('base') + objs = [base_objs] + + deps += ['rawdev', 'pci', 'bus_pci', 'kvargs', + 'bus_vdev', 'bus_ifpga', 'net'] + ext_deps += dep -allow_experimental_apis = true + sources = files('ifpga_rawdev.c') + + includes += include_directories('base') + includes += include_directories('../../net/ipn3ke') + + allow_experimental_apis = true +endif diff --git a/mk/rte.app.mk b/mk/rte.app.mk index 683e3a4e33..a278552c62 100644 --- a/mk/rte.app.mk +++ b/mk/rte.app.mk @@ -330,7 +330,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV) += -lrte_rawdev_dpaa2_qdma endif # CONFIG_RTE_LIBRTE_FSLMC_BUS _LDLIBS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS) += -lrte_bus_ifpga ifeq ($(CONFIG_RTE_LIBRTE_IFPGA_BUS),y) -_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV) += -lrte_rawdev_ifpga +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV) += -lrte_rawdev_ifpga -lfdt _LDLIBS-$(CONFIG_RTE_LIBRTE_IPN3KE_PMD) += -lrte_pmd_ipn3ke endif # CONFIG_RTE_LIBRTE_IFPGA_BUS _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += -lrte_rawdev_ioat