From: Rasesh Mody Date: Fri, 22 Nov 2019 23:31:18 +0000 (-0800) Subject: doc: update qede guide X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=e28bfe33552f294719889c48c0c050864b24c9ce;p=dpdk.git doc: update qede guide - Add note for sharing an adapter between DPDK and Linux drivers. - Update the firmware version in example. - Add Config note for potential error due to lack of memzone descriptor count. Signed-off-by: Rasesh Mody --- diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst index 2f40457950..5b2f868952 100644 --- a/doc/guides/nics/qede.rst +++ b/doc/guides/nics/qede.rst @@ -70,6 +70,12 @@ Co-existence considerations to the PFs of a given adapter and either qede PMD or Linux drivers (qed and qede) can be bound to the VFs of the adapter. +- For sharing an adapter between DPDK and Linux drivers, SRIOV needs + to be enabled. Bind all the PFs to Linux Drivers(qed/qede). Create + a VF on PFs where DPDK is desired and bind these VFs to qede_pmd. + Binding of PFs simultaneously to DPDK and Linux drivers on a given + adapter is not supported. + Supported QLogic Adapters ------------------------- @@ -82,9 +88,7 @@ Prerequisites inbox in certain newer Linux distros under the standard directory ``E.g. /lib/firmware/qed/qed_init_values-8.40.33.0.bin``. If the required firmware files are not available then download it from - `linux-firmware git repository `_ - or `QLogic Driver Download Center `_. - To download firmware file from QLogic website, select adapter category, model and DPDK Poll Mode Driver. + `linux-firmware git repository `_. - Requires the NIC be updated minimally with **8.30.x.x** Management firmware(MFW) version supported for that NIC. It is highly recommended that the NIC be updated with the latest available management firmware version to get latest feature set. @@ -99,7 +103,6 @@ Prerequisites `QLogic Driver Download Center `_. For downloading PF driver, select adapter category, model and Linux distro. - Performance note ~~~~~~~~~~~~~~~~ @@ -126,12 +129,26 @@ enabling debugging options may affect system performance. - ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) Gives absolute path of firmware file. - ``Eg: "/lib/firmware/qed/qed_init_values-8.37.7.0.bin"`` + ``Eg: "/lib/firmware/qed/qed_init_values-8.40.33.0.bin"`` Empty string indicates driver will pick up the firmware file from the default location /lib/firmware/qed. CAUTION this option is more for custom firmware, it is not recommended for use under normal condition. +Config notes +~~~~~~~~~~~~ + +When there are multiple adapters and/or large number of Rx/Tx queues +configured on the adapters, the default (2560) number of memzone +descriptors may not be enough. Please increase the number of memzone +descriptors to a higher number as needed. When sufficient number of +memzone descriptors are not configured, user can potentially run into +following error. + + .. code-block:: console + + EAL: memzone_reserve_aligned_thread_unsafe(): No more room in config + Driver compilation and testing ------------------------------