From: Jijiang Liu Date: Wed, 18 Jun 2014 19:01:03 +0000 (+0200) Subject: ixgbe/base: allow access to PHY register without lock X-Git-Tag: spdx-start~10636 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=e7012e2c2275d8e2aaecd26a6b023bceea99cb64;p=dpdk.git ixgbe/base: allow access to PHY register without lock Signed-off-by: Jijiang Liu Acked-by: Helin Zhang Tested-by: Waterman Cao [Thomas: split code drop] --- diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c index fc5f7d71de..13fa4dad45 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c @@ -318,7 +318,7 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_init_ops_82599"); - ret_val = ixgbe_init_phy_ops_generic(hw); + ixgbe_init_phy_ops_generic(hw); ret_val = ixgbe_init_ops_generic(hw); /* PHY */ diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c index 33d6551a51..382b0ed068 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c @@ -65,6 +65,8 @@ s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) phy->ops.reset = &ixgbe_reset_phy_generic; phy->ops.read_reg = &ixgbe_read_phy_reg_generic; phy->ops.write_reg = &ixgbe_write_phy_reg_generic; + phy->ops.read_reg_mdi = &ixgbe_read_phy_reg_mdi; + phy->ops.write_reg_mdi = &ixgbe_write_phy_reg_mdi; phy->ops.setup_link = &ixgbe_setup_phy_link_generic; phy->ops.setup_link_speed = &ixgbe_setup_phy_link_speed_generic; phy->ops.check_link = NULL; @@ -308,8 +310,88 @@ out: return status; } +/** + * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without + * the SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data) +{ + u32 i, data, command; + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n"); + return IXGBE_ERR_PHY; + } + + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n"); + return IXGBE_ERR_PHY; + } + + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + + return IXGBE_SUCCESS; +} + /** * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * using the SWFW lock - this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read * @phy_data: Pointer to read data from PHY register @@ -317,10 +399,7 @@ out: s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) { - u32 command; - u32 i; - u32 data; - s32 status = IXGBE_SUCCESS; + s32 status; u16 gssr; DEBUGFUNC("ixgbe_read_phy_reg_generic"); @@ -330,85 +409,94 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) { + status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); + hw->mac.ops.release_swfw_sync(hw, gssr); + } else { status = IXGBE_ERR_SWFW_SYNC; + } - if (status == IXGBE_SUCCESS) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + return status; +} - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); +/** + * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register + * without SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 i, command; - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - DEBUGOUT("PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); - if (status == IXGBE_SUCCESS) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - DEBUGOUT("PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } - hw->mac.ops.release_swfw_sync(hw, gssr); + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; } - return status; + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } + + return IXGBE_SUCCESS; } /** * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * using SWFW lock- this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 5 bit device type @@ -417,9 +505,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) { - u32 command; - u32 i; - s32 status = IXGBE_SUCCESS; + s32 status; u16 gssr; DEBUGFUNC("ixgbe_write_phy_reg_generic"); @@ -429,73 +515,12 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == IXGBE_SUCCESS) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - DEBUGOUT("PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - - if (status == IXGBE_SUCCESS) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - DEBUGOUT("PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } - + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) { + status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); + } else { + status = IXGBE_ERR_SWFW_SYNC; } return status; diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h index dfcd2ba231..67c02b4aa5 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h @@ -106,6 +106,10 @@ enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data); +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 phy_data); s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data); s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h index 11fa5c9210..88be0585a6 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h @@ -3107,6 +3107,8 @@ struct ixgbe_phy_operations { s32 (*reset)(struct ixgbe_hw *); s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); + s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *); + s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);