From: Ciara Power Date: Thu, 3 Sep 2020 15:26:51 +0000 (+0100) Subject: config: remove default configs used with make X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=ec260aa3ad7ed1cc08e0af94f73c0509396ac989;p=dpdk.git config: remove default configs used with make Make is not supported for compiling DPDK, the config files are no longer needed. Signed-off-by: Ciara Power Signed-off-by: Thomas Monjalon --- diff --git a/MAINTAINERS b/MAINTAINERS index 37f1f1fc56..3b16d7a4b8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -94,18 +94,12 @@ F: devtools/words-case.txt F: license/ F: .editorconfig - Build System ------------- -M: Thomas Monjalon -F: Makefile -F: config/ - -Meson build M: Bruce Richardson +F: Makefile F: meson.build F: meson_options.txt -F: config/rte_config.h +F: config/ F: buildtools/binutils-avx512-check.sh F: buildtools/call-sphinx-build.py F: buildtools/gen-pmdinfo-cfile.sh diff --git a/config/common_armv8a_linux b/config/common_armv8a_linux deleted file mode 100644 index e942657a0f..0000000000 --- a/config/common_armv8a_linux +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017 Cavium, Inc -# - -#include "common_linux" - -CONFIG_RTE_MACHINE="armv8a" - -CONFIG_RTE_ARCH="arm64" -CONFIG_RTE_ARCH_ARM64=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_FORCE_INTRINSICS=y - -# Maximum available cache line size in arm64 implementations. -# Setting to maximum available cache line size in generic config -# to address minimum DMA alignment across all arm64 implementations. -CONFIG_RTE_CACHE_LINE_SIZE=128 - -CONFIG_RTE_USE_C11_MEM_MODEL=y - -# Accelarate rte_memcpy. Be sure to run unit test (memcpy_perf_autotest) -# to determine the best threshold in code. Refer to notes in source file -# (lib/librte_eal/arm/include/rte_memcpy_64.h) for more info. -CONFIG_RTE_ARCH_ARM64_MEMCPY=n -#CONFIG_RTE_ARM64_MEMCPY_ALIGNED_THRESHOLD=2048 -#CONFIG_RTE_ARM64_MEMCPY_UNALIGNED_THRESHOLD=512 -# Leave below RTE_ARM64_MEMCPY_xxx options commented out, unless there're -# strong reasons. -#CONFIG_RTE_ARM64_MEMCPY_SKIP_GCC_VER_CHECK=n -#CONFIG_RTE_ARM64_MEMCPY_ALIGN_MASK=0xF -#CONFIG_RTE_ARM64_MEMCPY_STRICT_ALIGN=n - -CONFIG_RTE_LIBRTE_IONIC_PMD=n -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n - -# -# NXP PFE PMD Driver -# -CONFIG_RTE_LIBRTE_PFE_PMD=y diff --git a/config/common_base b/config/common_base deleted file mode 100644 index fbf0ee70c8..0000000000 --- a/config/common_base +++ /dev/null @@ -1,1154 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2017 Intel Corporation - -# -# String that appears before the version number -# -CONFIG_RTE_VER_PREFIX="DPDK" - -# -# Version information completed when this file is processed for a build -# -CONFIG_RTE_VER_YEAR=__YEAR -CONFIG_RTE_VER_MONTH=__MONTH -CONFIG_RTE_VER_MINOR=__MINOR -CONFIG_RTE_VER_SUFFIX=__SUFFIX -CONFIG_RTE_VER_RELEASE=__RELEASE - -# -# define executive environment -# RTE_EXEC_ENV values are the directories in mk/exec-env/ -# -CONFIG_RTE_EXEC_ENV= - -# -# define the architecture we compile for. -# RTE_ARCH values are the directories in mk/arch/ -# -CONFIG_RTE_ARCH= - -# -# machine can define specific variables or action for a specific board -# RTE_MACHINE values are the directories in mk/machine/ -# -CONFIG_RTE_MACHINE= - -# -# The compiler we use. -# RTE_TOOLCHAIN values are the directories in mk/toolchain/ -# -CONFIG_RTE_TOOLCHAIN= - -# -# Use intrinsics or assembly code for key routines -# -CONFIG_RTE_FORCE_INTRINSICS=n - -# -# Machine forces strict alignment constraints. -# -CONFIG_RTE_ARCH_STRICT_ALIGN=n - -# -# Enable link time optimization -# -CONFIG_RTE_ENABLE_LTO=n - -# -# Compile to share library -# -CONFIG_RTE_BUILD_SHARED_LIB=n - -# -# Use newest code breaking previous ABI -# -CONFIG_RTE_NEXT_ABI=y - -# -# Machine's cache line size -# -CONFIG_RTE_CACHE_LINE_SIZE=64 - -# -# Memory model -# -CONFIG_RTE_USE_C11_MEM_MODEL=n - -# -# Compile Environment Abstraction Layer -# -CONFIG_RTE_LIBRTE_EAL=y -CONFIG_RTE_MAX_LCORE=128 -CONFIG_RTE_MAX_NUMA_NODES=8 -CONFIG_RTE_MAX_HEAPS=32 -CONFIG_RTE_MAX_MEMSEG_LISTS=64 -# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages -# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192 -CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768 -# a "type" is a combination of page size and NUMA node. total number of memseg -# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split -# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or -# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of -# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller -CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768 -CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072 -# global maximum usable amount of VA, in megabytes -CONFIG_RTE_MAX_MEM_MB=524288 -CONFIG_RTE_MAX_MEMZONE=2560 -CONFIG_RTE_MAX_TAILQ=32 -CONFIG_RTE_ENABLE_ASSERT=n -CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO -CONFIG_RTE_ENABLE_TRACE_FP=n -CONFIG_RTE_LOG_HISTORY=256 -CONFIG_RTE_BACKTRACE=y -CONFIG_RTE_LIBEAL_USE_HPET=n -CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n -CONFIG_RTE_EAL_IGB_UIO=n -CONFIG_RTE_EAL_VFIO=n -CONFIG_RTE_MAX_VFIO_GROUPS=64 -CONFIG_RTE_MAX_VFIO_CONTAINERS=64 -CONFIG_RTE_MALLOC_DEBUG=n -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_USE_LIBBSD=n -# Use WFE instructions to implement the rte_wait_for_equal_xxx APIs, -# calling these APIs put the cores in low power state while waiting -# for the memory address to become equal to the expected value. -# This is supported only by aarch64. -CONFIG_RTE_ARM_USE_WFE=n - -# -# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing. -# AVX512 is marked as experimental for now, will enable it after enough -# field test and possible optimization. -# -CONFIG_RTE_ENABLE_AVX=y -CONFIG_RTE_ENABLE_AVX512=n - -# Use ARM LSE ATOMIC instructions -CONFIG_RTE_ARM_FEATURE_ATOMICS=n - -# Default driver path (or "" to disable) -CONFIG_RTE_EAL_PMD_PATH="" - -# -# Compile Environment Abstraction Layer to support Vmware TSC map -# -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y - -# -# Compile the PCI library -# -CONFIG_RTE_LIBRTE_PCI=y - -# -# Compile the argument parser library -# -CONFIG_RTE_LIBRTE_KVARGS=y - -# -# Compile generic ethernet library -# -CONFIG_RTE_LIBRTE_ETHER=y -CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n -CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 -CONFIG_RTE_LIBRTE_IEEE1588=n -CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 -CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y -CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n - -# -# Turn off Tx preparation stage -# -# Warning: rte_eth_tx_prepare() can be safely disabled only if using a -# driver which do not implement any Tx preparation. -# -CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n - -# -# Common libraries, before Bus/PMDs -# -CONFIG_RTE_LIBRTE_COMMON_DPAAX=n - -# -# Compile the Intel FPGA bus -# -CONFIG_RTE_LIBRTE_IFPGA_BUS=y - -# -# Compile PCI bus driver -# -CONFIG_RTE_LIBRTE_PCI_BUS=y - -# -# Compile the vdev bus -# -CONFIG_RTE_LIBRTE_VDEV_BUS=y - -# -# Compile ARK PMD -# -CONFIG_RTE_LIBRTE_ARK_PMD=y -CONFIG_RTE_LIBRTE_ARK_PAD_TX=y -CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n -CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n - -# -# Compile Aquantia Atlantic PMD driver -# -CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y - -# -# Compile AMD PMD -# -CONFIG_RTE_LIBRTE_AXGBE_PMD=y -CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n - -# -# Compile burst-oriented Broadcom PMD driver -# -CONFIG_RTE_LIBRTE_BNX2X_PMD=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n -CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n -CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n - -# -# Compile burst-oriented Broadcom BNXT PMD driver -# -CONFIG_RTE_LIBRTE_BNXT_PMD=y - -# -# Compile burst-oriented Chelsio Terminator (CXGBE) PMD -# -CONFIG_RTE_LIBRTE_CXGBE_PMD=y - -# -# Compile burst-oriented NXP PFE PMD driver -# -CONFIG_RTE_LIBRTE_PFE_PMD=n - -# NXP DPAA Bus -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA_PMD=n -CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n - -# -# Compile NXP DPAA2 FSL-MC Bus -# -CONFIG_RTE_LIBRTE_FSLMC_BUS=n - -# -# Compile Support Libraries for NXP DPAA2 -# -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y - -# -# Compile burst-oriented NXP DPAA2 PMD driver -# -CONFIG_RTE_LIBRTE_DPAA2_PMD=n -CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n - -# -# Compile NXP ENETC PMD Driver -# -CONFIG_RTE_LIBRTE_ENETC_PMD=n - -# -# Compile burst-oriented Amazon ENA PMD driver -# -CONFIG_RTE_LIBRTE_ENA_PMD=y -CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n - -# -# Compile burst-oriented Cisco ENIC PMD driver -# -CONFIG_RTE_LIBRTE_ENIC_PMD=y - -# -# Compile burst-oriented IGB & EM PMD drivers -# -CONFIG_RTE_LIBRTE_EM_PMD=y -CONFIG_RTE_LIBRTE_IGB_PMD=y -CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n -CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n - -# -# Compile burst-oriented HINIC PMD driver -# -CONFIG_RTE_LIBRTE_HINIC_PMD=n - -# -# Compile burst-oriented HNS3 PMD driver -# -CONFIG_RTE_LIBRTE_HNS3_PMD=n - -# -# Compile Pensando IONIC PMD driver -# -CONFIG_RTE_LIBRTE_IONIC_PMD=y - -# -# Compile burst-oriented IXGBE PMD driver -# -CONFIG_RTE_LIBRTE_IXGBE_PMD=y -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n -CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n - -# -# Compile burst-oriented I40E PMD driver -# -CONFIG_RTE_LIBRTE_I40E_PMD=y -CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n -CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y -CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y -CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 -CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 - -# -# Compile burst-oriented FM10K PMD -# -CONFIG_RTE_LIBRTE_FM10K_PMD=y -CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n -CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y -CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y - -# -# Compile burst-oriented ICE PMD driver -# -CONFIG_RTE_LIBRTE_ICE_PMD=y -CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n - -# Compile burst-oriented IAVF PMD driver -# -CONFIG_RTE_LIBRTE_IAVF_PMD=y -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n -CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n -# -# Compile burst-oriented IPN3KE PMD driver -# -CONFIG_RTE_LIBRTE_IPN3KE_PMD=n - -# -# Compile burst-oriented IGC PMD drivers -# -CONFIG_RTE_LIBRTE_IGC_PMD=y -CONFIG_RTE_LIBRTE_IGC_DEBUG_RX=n -CONFIG_RTE_LIBRTE_IGC_DEBUG_TX=n - -# -# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD -# -CONFIG_RTE_LIBRTE_MLX4_PMD=n -CONFIG_RTE_LIBRTE_MLX4_DEBUG=n - -# -# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5, -# ConnectX-6 & BlueField (MLX5) PMD -# -CONFIG_RTE_LIBRTE_MLX5_PMD=n -CONFIG_RTE_LIBRTE_MLX5_DEBUG=n - -# -# Compile regex-oriented Mellanox PMD -# -CONFIG_RTE_LIBRTE_MLX5_REGEX_PMD=n - -# -# Compile vdpa-oriented Mellanox ConnectX-6 & BlueField (MLX5) PMD -# -CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=n - -# Linking method for mlx4/5 dependency on ibverbs and related libraries -# Default linking is dynamic by linker. -# Other options are: dynamic by dlopen at run-time, or statically embedded. -CONFIG_RTE_IBVERBS_LINK_DLOPEN=n -CONFIG_RTE_IBVERBS_LINK_STATIC=n - -# -# Compile burst-oriented Netronome NFP PMD driver -# -CONFIG_RTE_LIBRTE_NFP_PMD=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n - -# QLogic 10G/25G/40G/50G/100G PMD -# -CONFIG_RTE_LIBRTE_QEDE_PMD=y -CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n -CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n -#Provides abs path/name of the firmware file. -#Empty string denotes driver will use default firmware -CONFIG_RTE_LIBRTE_QEDE_FW="" - -# -# Compile burst-oriented Solarflare libefx-based PMD -# -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y -CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n - -# -# Compile software PMD backed by SZEDATA2 device -# -CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n - -# -# Compile software PMD backed by NFB device -# -CONFIG_RTE_LIBRTE_NFB_PMD=n - -# -# Compile burst-oriented Cavium Thunderx NICVF PMD driver -# -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n -CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n - -# -# Compile burst-oriented Cavium LiquidIO PMD driver -# -CONFIG_RTE_LIBRTE_LIO_PMD=y -CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n -CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n - -# -# Compile burst-oriented Cavium OCTEONTX network PMD driver -# -CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y - -# -# Compile burst-oriented Marvell OCTEON TX2 network PMD driver -# -CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y - -# -# Compile WRS accelerated virtual port (AVP) guest PMD driver -# -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n -CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n - -# -# Compile burst-oriented VIRTIO PMD driver -# -CONFIG_RTE_LIBRTE_VIRTIO_PMD=y -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n - -# -# Compile virtio device emulation inside virtio PMD driver -# -CONFIG_RTE_VIRTIO_USER=n - -# -# Compile burst-oriented VMXNET3 PMD driver -# -CONFIG_RTE_LIBRTE_VMXNET3_PMD=y -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n -CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n - -# -# Compile software PMD backed by AF_PACKET sockets (Linux only) -# -CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n - -# -# Compile software PMD backed by AF_XDP sockets (Linux only) -# -CONFIG_RTE_LIBRTE_PMD_AF_XDP=n - -# -# Compile Memory Interface PMD driver (Linux only) -# -CONFIG_RTE_LIBRTE_PMD_MEMIF=n - -# -# Compile link bonding PMD library -# -CONFIG_RTE_LIBRTE_PMD_BOND=y -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n -CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n - -# -# Compile fail-safe PMD -# -CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y - -# -# Compile Marvell PMD driver -# -CONFIG_RTE_LIBRTE_MVPP2_PMD=n - -# -# Compile Marvell MVNETA PMD driver -# -CONFIG_RTE_LIBRTE_MVNETA_PMD=n - -# -# Compile support for VMBus library -# -CONFIG_RTE_LIBRTE_VMBUS=n - -# -# Compile native PMD for Hyper-V/Azure -# -CONFIG_RTE_LIBRTE_NETVSC_PMD=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n -CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n - -# -# Compile virtual device driver for NetVSC on Hyper-V/Azure -# -CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n - -# -# Compile null PMD -# -CONFIG_RTE_LIBRTE_PMD_NULL=y - -# -# Compile software PMD backed by PCAP files -# -CONFIG_RTE_LIBRTE_PMD_PCAP=n - -# -# Compile example software rings based PMD -# -CONFIG_RTE_LIBRTE_PMD_RING=y -CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16 -CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16 - -# -# Compile SOFTNIC PMD -# -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n - -# -# Compile the TAP PMD -# It is enabled by default for Linux only. -# -CONFIG_RTE_LIBRTE_PMD_TAP=n - -# -# Do prefetch of packet data within PMD driver receive function -# -CONFIG_RTE_PMD_PACKET_PREFETCH=y - -# Compile generic wireless base band device library -# EXPERIMENTAL: API may change without prior notice -# -CONFIG_RTE_LIBRTE_BBDEV=y -CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n -CONFIG_RTE_BBDEV_MAX_DEVS=128 -CONFIG_RTE_BBDEV_OFFLOAD_COST=y -CONFIG_RTE_BBDEV_SDK_AVX2=n -CONFIG_RTE_BBDEV_SDK_AVX512=n - -# -# Compile PMD for NULL bbdev device -# -CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y - -# -# Compile PMD for turbo software bbdev device -# -CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y - -# -# Compile PMD for Intel FPGA LTE FEC bbdev device -# -CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y - -# -# Compile PMD for Intel FPGA 5GNR FEC bbdev device -# -CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC=y - -# -# Compile generic crypto device library -# -CONFIG_RTE_LIBRTE_CRYPTODEV=y -CONFIG_RTE_CRYPTO_MAX_DEVS=64 - -# -# Compile PMD for ARMv8 Crypto device -# -CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n - -# -# Compile NXP CAAM JR crypto Driver -# -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n -CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n - -# -# Compile NXP DPAA2 crypto sec driver for CAAM HW -# -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n - -# -# NXP DPAA caam - crypto driver -# -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n -CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4 - -# -# Compile PMD for Cavium OCTEON TX crypto device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y - -# -# Compile PMD for Marvell OCTEON TX2 crypto device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO=y - -# -# Compile PMD for QuickAssist based devices - see docs for details -# -CONFIG_RTE_LIBRTE_PMD_QAT=y -CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n -CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n -# -# Max. number of QuickAssist devices, which can be detected and attached -# -CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 -CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536 - -# -# Compile PMD for virtio crypto devices -# -CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y -# -# Number of maximum virtio crypto devices -# -CONFIG_RTE_MAX_VIRTIO_CRYPTO=32 - -# -# Compile PMD for AESNI backed device -# -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n - -# -# Compile PMD for Software backed device -# -CONFIG_RTE_LIBRTE_PMD_OPENSSL=n - -# -# Compile PMD for AESNI GCM device -# -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n - -# -# Compile PMD for SNOW 3G device -# -CONFIG_RTE_LIBRTE_PMD_SNOW3G=n -CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n - -# -# Compile PMD for KASUMI device -# -CONFIG_RTE_LIBRTE_PMD_KASUMI=n - -# -# Compile PMD for ZUC device -# -CONFIG_RTE_LIBRTE_PMD_ZUC=n - -# Compile PMD for Crypto Scheduler device -# -CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y - -# -# Compile PMD for NULL Crypto device -# -CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y - -# -# Compile PMD for AMD CCP crypto device -# -CONFIG_RTE_LIBRTE_PMD_CCP=n - -# -# Compile PMD for Marvell Crypto device -# -CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n - -# -# Compile PMD for NITROX crypto device -# -CONFIG_RTE_LIBRTE_PMD_NITROX=y - -# -# Compile generic security library -# -CONFIG_RTE_LIBRTE_SECURITY=y - -# -# Compile generic compression device library -# -CONFIG_RTE_LIBRTE_COMPRESSDEV=y -CONFIG_RTE_COMPRESS_MAX_DEVS=64 - -# -# Compile compressdev unit test -# -CONFIG_RTE_COMPRESSDEV_TEST=n - -# -# Compile PMD for Octeontx ZIPVF compression device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y - -# -# Compile PMD for ISA-L compression device -# -CONFIG_RTE_LIBRTE_PMD_ISAL=n - -# -# Compile PMD for ZLIB compression device -# -CONFIG_RTE_LIBRTE_PMD_ZLIB=n - -# -# Compile RegEx device support -# -CONFIG_RTE_LIBRTE_REGEXDEV=y -CONFIG_RTE_LIBRTE_REGEXDEV_DEBUG=n -CONFIG_RTE_MAX_REGEXDEV_DEVS=32 - -# -# Compile generic event device library -# -CONFIG_RTE_LIBRTE_EVENTDEV=y -CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n -CONFIG_RTE_EVENT_MAX_DEVS=16 -CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64 -CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32 -CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024 -CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32 -CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32 - -# -# Compile PMD for skeleton event device -# -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y -CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n - -# -# Compile PMD for software event device -# -CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y - -# -# Compile PMD for distributed software event device -# -CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y - -# -# Compile PMD for octeontx sso event device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y - -# -# Compile PMD for octeontx2 sso event device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y - -# -# Compile PMD for OPDL event device -# -CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y - -# -# Compile PMD for NXP DPAA event device -# -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n - -# -# Compile PMD for NXP DPAA2 event device -# -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n - -# -# Compile raw device support -# EXPERIMENTAL: API may change without prior notice -# -CONFIG_RTE_LIBRTE_RAWDEV=y -CONFIG_RTE_RAWDEV_MAX_DEVS=64 -CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y - -# -# Compile PMD for NXP DPAA2 CMDIF raw device -# -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n - -# -# Compile PMD for NXP DPAA2 QDMA raw device -# -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n - -# -# Compile PMD for Intel FPGA raw device -# -CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n - -# -# Compile PMD for Intel IOAT raw device -# -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y - -# -# Compile PMD for octeontx2 DMA raw device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y - -# -# Compile PMD for octeontx2 EP raw device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV=y - -# -# Compile PMD for NTB raw device -# -CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y - -# -# Compile librte_ring -# -CONFIG_RTE_LIBRTE_RING=y - -# -# Compile librte_stack -# -CONFIG_RTE_LIBRTE_STACK=y - -# -# Compile librte_mempool -# -CONFIG_RTE_LIBRTE_MEMPOOL=y -CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512 -CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n - -# -# Compile Mempool drivers -# -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y -CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64 -CONFIG_RTE_DRIVER_MEMPOOL_RING=y -CONFIG_RTE_DRIVER_MEMPOOL_STACK=y - -# -# Compile PMD for octeontx fpa mempool device -# -CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y - -# -# Compile PMD for octeontx2 npa mempool device -# -CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y - -# -# Compile librte_mbuf -# -CONFIG_RTE_LIBRTE_MBUF=y -CONFIG_RTE_LIBRTE_MBUF_DEBUG=n -CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc" -CONFIG_RTE_MBUF_REFCNT_ATOMIC=y -CONFIG_RTE_PKTMBUF_HEADROOM=128 - -# -# Compile librte_timer -# -CONFIG_RTE_LIBRTE_TIMER=y -CONFIG_RTE_LIBRTE_TIMER_DEBUG=n - -# -# Compile librte_cfgfile -# -CONFIG_RTE_LIBRTE_CFGFILE=y - -# -# Compile librte_cmdline -# -CONFIG_RTE_LIBRTE_CMDLINE=y -CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n - -# -# Compile librte_hash -# -CONFIG_RTE_LIBRTE_HASH=y -CONFIG_RTE_LIBRTE_HASH_DEBUG=n - -# -# Compile librte_efd -# -CONFIG_RTE_LIBRTE_EFD=y - -# -# Compile librte_member -# -CONFIG_RTE_LIBRTE_MEMBER=y - -# -# Compile librte_jobstats -# -CONFIG_RTE_LIBRTE_JOBSTATS=y - -# -# Compile the device metrics library -# -CONFIG_RTE_LIBRTE_METRICS=y - -# -# Compile the bitrate statistics library -# -CONFIG_RTE_LIBRTE_BITRATE=y - -# -# Compile the latency statistics library -# -CONFIG_RTE_LIBRTE_LATENCY_STATS=y - -# -# Compile librte_telemetry legacy support -# -CONFIG_RTE_LIBRTE_TELEMETRY=n - -# -# Compile librte_rcu -# -CONFIG_RTE_LIBRTE_RCU=y -CONFIG_RTE_LIBRTE_RCU_DEBUG=n - -# -# Compile librte_rib -# -CONFIG_RTE_LIBRTE_RIB=y - -# -# Compile librte_fib -# -CONFIG_RTE_LIBRTE_FIB=y -CONFIG_RTE_LIBRTE_FIB_DEBUG=n - -# -# Compile librte_lpm -# -CONFIG_RTE_LIBRTE_LPM=y -CONFIG_RTE_LIBRTE_LPM_DEBUG=n - -# -# Compile librte_acl -# -CONFIG_RTE_LIBRTE_ACL=y -CONFIG_RTE_LIBRTE_ACL_DEBUG=n - -# -# Compile librte_power -# -CONFIG_RTE_LIBRTE_POWER=n -CONFIG_RTE_LIBRTE_POWER_DEBUG=n -CONFIG_RTE_MAX_LCORE_FREQS=64 - -# -# Compile librte_net -# -CONFIG_RTE_LIBRTE_NET=y - -# -# Compile librte_ip_frag -# -CONFIG_RTE_LIBRTE_IP_FRAG=y -CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n -CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4 -CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n - -# -# Compile GRO library -# -CONFIG_RTE_LIBRTE_GRO=y - -# -# Compile GSO library -# -CONFIG_RTE_LIBRTE_GSO=y - -# -# Compile librte_meter -# -CONFIG_RTE_LIBRTE_METER=y - -# -# Compile librte_classify -# -CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y - -# -# Compile librte_sched -# -CONFIG_RTE_LIBRTE_SCHED=y -CONFIG_RTE_SCHED_DEBUG=n -CONFIG_RTE_SCHED_RED=n -CONFIG_RTE_SCHED_COLLECT_STATS=n -CONFIG_RTE_SCHED_SUBPORT_TC_OV=n -CONFIG_RTE_SCHED_PORT_N_GRINDERS=8 -CONFIG_RTE_SCHED_VECTOR=n - -# -# Compile the distributor library -# -CONFIG_RTE_LIBRTE_DISTRIBUTOR=y - -# -# Compile the reorder library -# -CONFIG_RTE_LIBRTE_REORDER=y - -# -# Compile librte_port -# -CONFIG_RTE_LIBRTE_PORT=y -CONFIG_RTE_PORT_STATS_COLLECT=n -CONFIG_RTE_PORT_PCAP=n - -# -# Compile librte_table -# -CONFIG_RTE_LIBRTE_TABLE=y -CONFIG_RTE_TABLE_STATS_COLLECT=n - -# -# Compile librte_pipeline -# -CONFIG_RTE_LIBRTE_PIPELINE=y -CONFIG_RTE_PIPELINE_STATS_COLLECT=n - -# -# Compile librte_kni -# -CONFIG_RTE_LIBRTE_KNI=n -CONFIG_RTE_LIBRTE_PMD_KNI=n -CONFIG_RTE_KNI_KMOD=n -CONFIG_RTE_KNI_PREEMPT_DEFAULT=y - -# -# Compile the pdump library -# -CONFIG_RTE_LIBRTE_PDUMP=y - -# -# Compile vhost user library -# -CONFIG_RTE_LIBRTE_VHOST=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n -CONFIG_RTE_LIBRTE_VHOST_DEBUG=n - -# -# Compile vhost PMD -# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled. -# -CONFIG_RTE_LIBRTE_PMD_VHOST=n - -# -# Compile IFC driver -# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO -# should be enabled. -# -CONFIG_RTE_LIBRTE_IFC_PMD=n - -# -# Compile librte_bpf -# -CONFIG_RTE_LIBRTE_BPF=y -# allow load BPF from ELF files (requires libelf) -CONFIG_RTE_LIBRTE_BPF_ELF=n - -# -# Compile librte_ipsec -# -CONFIG_RTE_LIBRTE_IPSEC=y - -# -# Compile librte_graph -# -CONFIG_RTE_LIBRTE_GRAPH=y -CONFIG_RTE_GRAPH_BURST_SIZE=256 -CONFIG_RTE_LIBRTE_GRAPH_STATS=y - -# -# Compile librte_node -# -CONFIG_RTE_LIBRTE_NODE=y - -# -# Compile the test application -# -CONFIG_RTE_APP_TEST=y -CONFIG_RTE_APP_TEST_RESOURCE_TAR=n - -# -# Compile the procinfo application -# -CONFIG_RTE_PROC_INFO=n - -# -# Compile the PMD test application -# -CONFIG_RTE_TEST_PMD=y -CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n -CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n - -# -# Compile the rte flow perf application -# -CONFIG_RTE_TEST_FLOW_PERF=y - -# -# Compile the bbdev test application -# -CONFIG_RTE_TEST_BBDEV=y - -# -# Compile the compression performance application -# -CONFIG_RTE_APP_COMPRESS_PERF=y - -# -# Compile the crypto performance application -# -CONFIG_RTE_APP_CRYPTO_PERF=y - -# -# Compile the eventdev application -# -CONFIG_RTE_APP_EVENTDEV=y diff --git a/config/common_freebsd b/config/common_freebsd deleted file mode 100644 index 456b394c4d..0000000000 --- a/config/common_freebsd +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2016 Intel Corporation - -#include "common_base" - -CONFIG_RTE_EXEC_ENV="bsdapp" -CONFIG_RTE_EXEC_ENV_BSDAPP=y -CONFIG_RTE_EXEC_ENV_FREEBSD=y - -# -# FreeBSD contiguous memory driver settings -# -CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64 -CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2 -CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024 diff --git a/config/common_linux b/config/common_linux deleted file mode 100644 index 816810671a..0000000000 --- a/config/common_linux +++ /dev/null @@ -1,68 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2016 Intel Corporation - -#include "common_base" - -CONFIG_RTE_EXEC_ENV="linuxapp" -CONFIG_RTE_EXEC_ENV_LINUX=y -CONFIG_RTE_EXEC_ENV_LINUXAPP=y - -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y -CONFIG_RTE_EAL_VFIO=y -CONFIG_RTE_LIBRTE_KNI=y -CONFIG_RTE_LIBRTE_PMD_KNI=y -CONFIG_RTE_LIBRTE_VHOST=y -CONFIG_RTE_LIBRTE_VHOST_NUMA=y -CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n -CONFIG_RTE_LIBRTE_PMD_VHOST=y -CONFIG_RTE_LIBRTE_IFC_PMD=y -CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y -CONFIG_RTE_LIBRTE_PMD_MEMIF=y -CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y -CONFIG_RTE_LIBRTE_PMD_TAP=y -CONFIG_RTE_LIBRTE_AVP_PMD=y -CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=y -CONFIG_RTE_LIBRTE_NFP_PMD=y -CONFIG_RTE_LIBRTE_POWER=y -CONFIG_RTE_VIRTIO_USER=y -CONFIG_RTE_PROC_INFO=y - -CONFIG_RTE_LIBRTE_VMBUS=y -CONFIG_RTE_LIBRTE_NETVSC_PMD=y - -# -# Common libraries, before Bus/PMDs -# -CONFIG_RTE_LIBRTE_COMMON_DPAAX=y - -# NXP DPAA BUS and drivers -CONFIG_RTE_LIBRTE_DPAA_BUS=y -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=y -CONFIG_RTE_LIBRTE_DPAA_PMD=y -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=y -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=y -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=y - -# NXP FSLMC BUS and DPAA2 drivers -CONFIG_RTE_LIBRTE_FSLMC_BUS=y -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=y -CONFIG_RTE_LIBRTE_DPAA2_PMD=y -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=y -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=y -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=y -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=y - -# -# NXP ENETC PMD Driver -# -CONFIG_RTE_LIBRTE_ENETC_PMD=y - -# -# HINIC PMD driver -# -CONFIG_RTE_LIBRTE_HINIC_PMD=y - -# -# Hisilicon HNS3 PMD driver -# -CONFIG_RTE_LIBRTE_HNS3_PMD=y diff --git a/config/defconfig_arm-armv7a-linux-gcc b/config/defconfig_arm-armv7a-linux-gcc deleted file mode 120000 index 84619de43a..0000000000 --- a/config/defconfig_arm-armv7a-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm-armv7a-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc deleted file mode 100644 index ac91120868..0000000000 --- a/config/defconfig_arm-armv7a-linuxapp-gcc +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (C) 2015 RehiveTech. All right reserved. - -#include "common_linux" - -CONFIG_RTE_MACHINE="armv7a" - -CONFIG_RTE_ARCH="arm" -CONFIG_RTE_ARCH_ARM=y -CONFIG_RTE_ARCH_ARMv7=y -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a9" - -# Accelerate memcpy operations. Consider enabling for Cortex-A15. -# For Cortex-A7 and Cortex-A9, It might accelerate short data copies (< 64 B). -CONFIG_RTE_ARCH_ARM_NEON_MEMCPY=n - -CONFIG_RTE_FORCE_INTRINSICS=y -CONFIG_RTE_ARCH_STRICT_ALIGN=y - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y - -# NUMA is not supported on ARM -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -# ARM doesn't have support for vmware TSC map -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n - -# KNI is not supported on 32-bit -CONFIG_RTE_LIBRTE_KNI=n - -# cannot use those on ARM -CONFIG_RTE_LIBRTE_ARK_PMD=n -CONFIG_RTE_LIBRTE_EM_PMD=n -CONFIG_RTE_LIBRTE_IGB_PMD=n -CONFIG_RTE_LIBRTE_CXGBE_PMD=n -CONFIG_RTE_LIBRTE_E1000_PMD=n -CONFIG_RTE_LIBRTE_ENIC_PMD=n -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_VMXNET3_PMD=n -CONFIG_RTE_LIBRTE_QEDE_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_NFP_PMD=n -CONFIG_RTE_LIBRTE_HINIC_PMD=n -CONFIG_RTE_LIBRTE_HNS3_PMD=n -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n -CONFIG_RTE_LIBRTE_IONIC_PMD=n diff --git a/config/defconfig_arm64-armada-linux-gcc b/config/defconfig_arm64-armada-linux-gcc deleted file mode 120000 index 64ce2a5687..0000000000 --- a/config/defconfig_arm64-armada-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-armada-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-armada-linuxapp-gcc b/config/defconfig_arm64-armada-linuxapp-gcc deleted file mode 100644 index a49bebe374..0000000000 --- a/config/defconfig_arm64-armada-linuxapp-gcc +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Marvell International Ltd -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -# -# Compile Environment Abstraction Layer -# -CONFIG_RTE_MAX_LCORE=16 -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_CACHE_LINE_SIZE=64 - -# Enable PMDs -CONFIG_RTE_LIBRTE_MVEP_COMMON=y -CONFIG_RTE_LIBRTE_MVPP2_PMD=y -CONFIG_RTE_LIBRTE_MVNETA_PMD=y -CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=y - -# Disable NXP as it is conflict with MUSDK -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_COMMON_DPAAX=n -CONFIG_RTE_LIBRTE_FSLMC_BUS=n -CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA2_PMD=n -CONFIG_RTE_LIBRTE_DPAA_BUS=n -CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n -CONFIG_RTE_LIBRTE_DPAA_PMD=n -CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n -CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n -CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n -CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n -CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n -CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n -CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n -CONFIG_RTE_LIBRTE_PFE_PMD=n -CONFIG_RTE_LIBRTE_ENETC_PMD=n - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n diff --git a/config/defconfig_arm64-armv8a-linux-clang b/config/defconfig_arm64-armv8a-linux-clang deleted file mode 120000 index 196808b982..0000000000 --- a/config/defconfig_arm64-armv8a-linux-clang +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-armv8a-linuxapp-clang \ No newline at end of file diff --git a/config/defconfig_arm64-armv8a-linux-gcc b/config/defconfig_arm64-armv8a-linux-gcc deleted file mode 120000 index 0949519562..0000000000 --- a/config/defconfig_arm64-armv8a-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-armv8a-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-armv8a-linuxapp-clang b/config/defconfig_arm64-armv8a-linuxapp-clang deleted file mode 100644 index d3b4dad532..0000000000 --- a/config/defconfig_arm64-armv8a-linuxapp-clang +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2017 Cavium, Inc -# - -#include "common_armv8a_linux" - -CONFIG_RTE_TOOLCHAIN="clang" -CONFIG_RTE_TOOLCHAIN_CLANG=y diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc deleted file mode 100644 index 58c4a4029a..0000000000 --- a/config/defconfig_arm64-armv8a-linuxapp-gcc +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2015 Cavium, Inc -# - -#include "common_armv8a_linux" - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y -CONFIG_RTE_MAX_LCORE=256 diff --git a/config/defconfig_arm64-bluefield-linux-gcc b/config/defconfig_arm64-bluefield-linux-gcc deleted file mode 120000 index dad37d5e79..0000000000 --- a/config/defconfig_arm64-bluefield-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-bluefield-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-bluefield-linuxapp-gcc b/config/defconfig_arm64-bluefield-linuxapp-gcc deleted file mode 100644 index b496538819..0000000000 --- a/config/defconfig_arm64-bluefield-linuxapp-gcc +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright 2019 Mellanox Technologies, Ltd -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -# Mellanox BlueField -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" - -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_CACHE_LINE_SIZE=64 - -# UMA architecture -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -# PMD for ConnectX-5 -CONFIG_RTE_LIBRTE_MLX5_PMD=y diff --git a/config/defconfig_arm64-dpaa-linux-gcc b/config/defconfig_arm64-dpaa-linux-gcc deleted file mode 120000 index dc05caacf3..0000000000 --- a/config/defconfig_arm64-dpaa-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-dpaa-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-dpaa-linuxapp-gcc b/config/defconfig_arm64-dpaa-linuxapp-gcc deleted file mode 100644 index 4ae4cd8502..0000000000 --- a/config/defconfig_arm64-dpaa-linuxapp-gcc +++ /dev/null @@ -1,31 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright 2016 Freescale Semiconductor, Inc. -# Copyright 2017-2019 NXP - -#include "defconfig_arm64-armv8a-linux-gcc" - -# NXP (Freescale) - Soc Architecture for DPAA or DPAA2 support -# DPAA - FMAN, QMAN & BMAN support (e.g. LS1043, LS1046) -# DPAA2 - WRIOP and QBMAN (e.g. LS1088, LS2088, LX2160 etc) -# -CONFIG_RTE_MACHINE="dpaa" -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" - -# -# Compile Environment Abstraction Layer -# -CONFIG_RTE_MAX_LCORE=16 -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_CACHE_LINE_SIZE=64 -CONFIG_RTE_PKTMBUF_HEADROOM=128 - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -# Enable PHY mode when using VM-VFIO target -CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n - -# NXP DPAA Bus -CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n -CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n diff --git a/config/defconfig_arm64-emag-linux-gcc b/config/defconfig_arm64-emag-linux-gcc deleted file mode 120000 index 21894a31a8..0000000000 --- a/config/defconfig_arm64-emag-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-emag-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-emag-linuxapp-gcc b/config/defconfig_arm64-emag-linuxapp-gcc deleted file mode 100644 index 1db654c899..0000000000 --- a/config/defconfig_arm64-emag-linuxapp-gcc +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2019 Ampere Computing -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="emag" - -CONFIG_RTE_CACHE_LINE_SIZE=64 -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_MAX_LCORE=32 diff --git a/config/defconfig_arm64-n1sdp-linux-gcc b/config/defconfig_arm64-n1sdp-linux-gcc deleted file mode 120000 index 103bbea90f..0000000000 --- a/config/defconfig_arm64-n1sdp-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-n1sdp-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-n1sdp-linuxapp-gcc b/config/defconfig_arm64-n1sdp-linuxapp-gcc deleted file mode 100644 index f9138093b5..0000000000 --- a/config/defconfig_arm64-n1sdp-linuxapp-gcc +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2019 Arm Ltd. -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="n1sdp" -CONFIG_RTE_MAX_LCORE=4 -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_CACHE_LINE_SIZE=64 - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n diff --git a/config/defconfig_arm64-octeontx2-linux-gcc b/config/defconfig_arm64-octeontx2-linux-gcc deleted file mode 120000 index e251505311..0000000000 --- a/config/defconfig_arm64-octeontx2-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-octeontx2-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-octeontx2-linuxapp-gcc b/config/defconfig_arm64-octeontx2-linuxapp-gcc deleted file mode 100644 index 0d83becf54..0000000000 --- a/config/defconfig_arm64-octeontx2-linuxapp-gcc +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Marvell International Ltd -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="octeontx2" - -CONFIG_RTE_MAX_NUMA_NODES=1 -CONFIG_RTE_MAX_LCORE=36 -CONFIG_RTE_ARM_FEATURE_ATOMICS=y - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -# Max supported NIX LFs -CONFIG_RTE_MAX_VFIO_GROUPS=128 diff --git a/config/defconfig_arm64-stingray-linux-gcc b/config/defconfig_arm64-stingray-linux-gcc deleted file mode 120000 index 829dd65f05..0000000000 --- a/config/defconfig_arm64-stingray-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-stingray-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-stingray-linuxapp-gcc b/config/defconfig_arm64-stingray-linuxapp-gcc deleted file mode 100644 index 2a6f6cee28..0000000000 --- a/config/defconfig_arm64-stingray-linuxapp-gcc +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (C) Broadcom 2017-2018. All rights reserved. -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -# Broadcom - Stingray -CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72" - -# Doesn't support NUMA -CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n -CONFIG_RTE_LIBRTE_VHOST_NUMA=n - -CONFIG_RTE_EAL_IGB_UIO=y diff --git a/config/defconfig_arm64-thunderx-linux-gcc b/config/defconfig_arm64-thunderx-linux-gcc deleted file mode 120000 index 1b9c4ad211..0000000000 --- a/config/defconfig_arm64-thunderx-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-thunderx-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc deleted file mode 100644 index 946906b67a..0000000000 --- a/config/defconfig_arm64-thunderx-linuxapp-gcc +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2015 Cavium, Inc -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="thunderx" - -CONFIG_RTE_USE_C11_MEM_MODEL=n -CONFIG_RTE_MAX_NUMA_NODES=2 -CONFIG_RTE_MAX_LCORE=96 -CONFIG_RTE_MAX_VFIO_GROUPS=128 - -# -# Compile PMD for octeontx sso event device -# -CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y diff --git a/config/defconfig_arm64-thunderx2-linux-gcc b/config/defconfig_arm64-thunderx2-linux-gcc deleted file mode 120000 index b40a760b1d..0000000000 --- a/config/defconfig_arm64-thunderx2-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-thunderx2-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-thunderx2-linuxapp-gcc b/config/defconfig_arm64-thunderx2-linuxapp-gcc deleted file mode 100644 index af4a89c480..0000000000 --- a/config/defconfig_arm64-thunderx2-linuxapp-gcc +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2018 Marvell International Ltd -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="thunderx2" - -CONFIG_RTE_CACHE_LINE_SIZE=64 -CONFIG_RTE_MAX_NUMA_NODES=2 -CONFIG_RTE_MAX_LCORE=256 -CONFIG_RTE_ARM_FEATURE_ATOMICS=y diff --git a/config/defconfig_arm64-xgene1-linux-gcc b/config/defconfig_arm64-xgene1-linux-gcc deleted file mode 120000 index d5e8b5e550..0000000000 --- a/config/defconfig_arm64-xgene1-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_arm64-xgene1-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_arm64-xgene1-linuxapp-gcc b/config/defconfig_arm64-xgene1-linuxapp-gcc deleted file mode 100644 index fbf576c4aa..0000000000 --- a/config/defconfig_arm64-xgene1-linuxapp-gcc +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2015 Cavium, Inc -# - -#include "defconfig_arm64-armv8a-linux-gcc" - -CONFIG_RTE_MACHINE="xgene1" -CONFIG_RTE_CACHE_LINE_SIZE=64 diff --git a/config/defconfig_i686-native-linux-gcc b/config/defconfig_i686-native-linux-gcc deleted file mode 120000 index 927141d5dd..0000000000 --- a/config/defconfig_i686-native-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_i686-native-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_i686-native-linux-icc b/config/defconfig_i686-native-linux-icc deleted file mode 120000 index e6a466b3e3..0000000000 --- a/config/defconfig_i686-native-linux-icc +++ /dev/null @@ -1 +0,0 @@ -defconfig_i686-native-linuxapp-icc \ No newline at end of file diff --git a/config/defconfig_i686-native-linuxapp-gcc b/config/defconfig_i686-native-linuxapp-gcc deleted file mode 100644 index 61ea1606f4..0000000000 --- a/config/defconfig_i686-native-linuxapp-gcc +++ /dev/null @@ -1,66 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="i686" -CONFIG_RTE_ARCH_I686=y -CONFIG_RTE_ARCH_X86=y - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y - -# -# KNI is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_KNI=n - -# -# Solarflare PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n - -# -# AES-NI multi-buffer PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n - -# -# AES-NI GCM PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n - -# -# KASUMI PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_KASUMI=n - -# -# ZUC PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_ZUC=n - -# -# AVP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_AVP_PMD=n - -# -# NFP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_NFP_PMD=n - -# 32-bit doesn't break up memory in lists, but does have VA allocation limit -CONFIG_RTE_MAX_MEM_MB=2048 - -# -# HINIC PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HINIC_PMD=n - -# -# HNS3 PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HNS3_PMD=n diff --git a/config/defconfig_i686-native-linuxapp-icc b/config/defconfig_i686-native-linuxapp-icc deleted file mode 100644 index 7f614d3467..0000000000 --- a/config/defconfig_i686-native-linuxapp-icc +++ /dev/null @@ -1,66 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="i686" -CONFIG_RTE_ARCH_I686=y -CONFIG_RTE_ARCH_X86=y - -CONFIG_RTE_TOOLCHAIN="icc" -CONFIG_RTE_TOOLCHAIN_ICC=y - -# -# KNI is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_KNI=n - -# -# Solarflare PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n - -# -# AES-NI multi-buffer PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n - -# -# AES-NI GCM PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n - -# -# KASUMI PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_KASUMI=n - -# -# ZUC PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_PMD_ZUC=n - -# -# AVP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_AVP_PMD=n - -# -# NFP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_NFP_PMD=n - -# 32-bit doesn't break up memory in lists, but does have VA allocation limit -CONFIG_RTE_MAX_MEM_MB=2048 - -# -# HINIC PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HINIC_PMD=n - -# -# HNS3 PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HNS3_PMD=n diff --git a/config/defconfig_ppc_64-power8-linux-gcc b/config/defconfig_ppc_64-power8-linux-gcc deleted file mode 120000 index 580c92e12e..0000000000 --- a/config/defconfig_ppc_64-power8-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_ppc_64-power8-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc deleted file mode 100644 index c917c47746..0000000000 --- a/config/defconfig_ppc_64-power8-linuxapp-gcc +++ /dev/null @@ -1,35 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright (C) IBM Corporation 2014. - -#include "common_linux" - -CONFIG_RTE_MACHINE="power8" - -CONFIG_RTE_ARCH="ppc_64" -CONFIG_RTE_ARCH_PPC_64=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_MAX_LCORE=1536 -CONFIG_RTE_MAX_NUMA_NODES=32 -CONFIG_RTE_CACHE_LINE_SIZE=128 - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y - -# Note: Power doesn't have this support -CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n - -# Note: Initially, all of the PMD drivers compilation are turned off on Power -# Will turn on them only after the successful testing on Power -CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n -CONFIG_RTE_LIBRTE_IXGBE_PMD=n -CONFIG_RTE_LIBRTE_VIRTIO_PMD=y -CONFIG_RTE_LIBRTE_VMXNET3_PMD=n -CONFIG_RTE_LIBRTE_ENIC_PMD=n -CONFIG_RTE_LIBRTE_FM10K_PMD=n -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n -CONFIG_RTE_LIBRTE_AVP_PMD=n -CONFIG_RTE_LIBRTE_HINIC_PMD=n -CONFIG_RTE_LIBRTE_HNS3_PMD=n -CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=n -CONFIG_RTE_LIBRTE_IONIC_PMD=n diff --git a/config/defconfig_x86_64-native-bsdapp-clang b/config/defconfig_x86_64-native-bsdapp-clang deleted file mode 100644 index 7204738e14..0000000000 --- a/config/defconfig_x86_64-native-bsdapp-clang +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_freebsd" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_64" -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_TOOLCHAIN="clang" -CONFIG_RTE_TOOLCHAIN_CLANG=y diff --git a/config/defconfig_x86_64-native-bsdapp-gcc b/config/defconfig_x86_64-native-bsdapp-gcc deleted file mode 100644 index b24e2e6d5a..0000000000 --- a/config/defconfig_x86_64-native-bsdapp-gcc +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_freebsd" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_64" -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y diff --git a/config/defconfig_x86_64-native-freebsd-clang b/config/defconfig_x86_64-native-freebsd-clang deleted file mode 120000 index 76115fd5a6..0000000000 --- a/config/defconfig_x86_64-native-freebsd-clang +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_64-native-bsdapp-clang \ No newline at end of file diff --git a/config/defconfig_x86_64-native-freebsd-gcc b/config/defconfig_x86_64-native-freebsd-gcc deleted file mode 120000 index 72dd4b44be..0000000000 --- a/config/defconfig_x86_64-native-freebsd-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_64-native-bsdapp-gcc \ No newline at end of file diff --git a/config/defconfig_x86_64-native-linux-clang b/config/defconfig_x86_64-native-linux-clang deleted file mode 120000 index 3bcf89d6a4..0000000000 --- a/config/defconfig_x86_64-native-linux-clang +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_64-native-linuxapp-clang \ No newline at end of file diff --git a/config/defconfig_x86_64-native-linux-gcc b/config/defconfig_x86_64-native-linux-gcc deleted file mode 120000 index d707965941..0000000000 --- a/config/defconfig_x86_64-native-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_64-native-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_x86_64-native-linux-icc b/config/defconfig_x86_64-native-linux-icc deleted file mode 120000 index a36b47131a..0000000000 --- a/config/defconfig_x86_64-native-linux-icc +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_64-native-linuxapp-icc \ No newline at end of file diff --git a/config/defconfig_x86_64-native-linuxapp-clang b/config/defconfig_x86_64-native-linuxapp-clang deleted file mode 100644 index 7508c0f2da..0000000000 --- a/config/defconfig_x86_64-native-linuxapp-clang +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_64" -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_TOOLCHAIN="clang" -CONFIG_RTE_TOOLCHAIN_CLANG=y diff --git a/config/defconfig_x86_64-native-linuxapp-gcc b/config/defconfig_x86_64-native-linuxapp-gcc deleted file mode 100644 index db67066a57..0000000000 --- a/config/defconfig_x86_64-native-linuxapp-gcc +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_64" -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y diff --git a/config/defconfig_x86_64-native-linuxapp-icc b/config/defconfig_x86_64-native-linuxapp-icc deleted file mode 100644 index 8aa7af7e20..0000000000 --- a/config/defconfig_x86_64-native-linuxapp-icc +++ /dev/null @@ -1,29 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_64" -CONFIG_RTE_ARCH_X86_64=y -CONFIG_RTE_ARCH_X86=y -CONFIG_RTE_ARCH_64=y - -CONFIG_RTE_TOOLCHAIN="icc" -CONFIG_RTE_TOOLCHAIN_ICC=y - -# -# Solarflare PMD build is not supported using icc toolchain -# -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n - -# -# HINIC PMD build is not supported using icc toolchain -# -CONFIG_RTE_LIBRTE_HINIC_PMD=n - -# -# HNS3 PMD build is not supported using icc toolchain -# -CONFIG_RTE_LIBRTE_HNS3_PMD=n diff --git a/config/defconfig_x86_x32-native-linux-gcc b/config/defconfig_x86_x32-native-linux-gcc deleted file mode 120000 index 7ea00cecb3..0000000000 --- a/config/defconfig_x86_x32-native-linux-gcc +++ /dev/null @@ -1 +0,0 @@ -defconfig_x86_x32-native-linuxapp-gcc \ No newline at end of file diff --git a/config/defconfig_x86_x32-native-linuxapp-gcc b/config/defconfig_x86_x32-native-linuxapp-gcc deleted file mode 100644 index c188f4331c..0000000000 --- a/config/defconfig_x86_x32-native-linuxapp-gcc +++ /dev/null @@ -1,46 +0,0 @@ -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -#include "common_linux" - -CONFIG_RTE_MACHINE="native" - -CONFIG_RTE_ARCH="x86_x32" -CONFIG_RTE_ARCH_X86_X32=y -CONFIG_RTE_ARCH_X86=y - -CONFIG_RTE_TOOLCHAIN="gcc" -CONFIG_RTE_TOOLCHAIN_GCC=y - -# -# KNI is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_KNI=n - -# -# Solarflare PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n - -# -# AVP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_AVP_PMD=n - -# -# NFP PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_NFP_PMD=n - -# 32-bit doesn't break up memory in lists, but does have VA allocation limit -CONFIG_RTE_MAX_MEM_MB=2048 - -# -# HINIC PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HINIC_PMD=n - -# -# HNS3 PMD is not supported on 32-bit -# -CONFIG_RTE_LIBRTE_HNS3_PMD=n diff --git a/config/rte_config.h b/config/rte_config.h index 9bb915347c..0bae630fd9 100644 --- a/config/rte_config.h +++ b/config/rte_config.h @@ -8,10 +8,6 @@ * Header file containing DPDK compilation parameters. Also include the * meson-generated header file containing the detected parameters that * are variable across builds or build environments. - * - * NOTE: This file is only used for meson+ninja builds. For builds done - * using make/gmake, the rte_config.h file is autogenerated from the - * defconfig_* files in the config directory. */ #ifndef _RTE_CONFIG_H_ #define _RTE_CONFIG_H_ diff --git a/devtools/build-tags.sh b/devtools/build-tags.sh index 276fff647b..8fa01ad177 100755 --- a/devtools/build-tags.sh +++ b/devtools/build-tags.sh @@ -19,8 +19,8 @@ arm_64=true print_usage() { echo "Usage: $(basename $0) [-h] [-v] tags|cscope|gtags|etags [config]" - echo "Valid configs are:" - make showconfigs | sed 's,^,\t,' + echo "Examples of valid configs are: " + echo "x86_64-bsd, arm64-linux, ppc_64-linux" } # Move to the root of the git tree @@ -125,18 +125,7 @@ ppc_64_sources() find_sources "$source_dirs" '*altivec*.[chS]' } -check_valid_target() -{ - if [ ! -f "config/defconfig_$1" ] ; then - echo "Invalid config: $1" - print_usage - exit 0 - fi -} - if [ -n "$2" ]; then - check_valid_target $2 - echo $2 | grep -q "linux" || linux=false echo $2 | grep -q "bsd" || bsd=false echo $2 | grep -q "x86_64-" || x86_64=false diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c index 07e072e13f..c15ed3bade 100644 --- a/drivers/bus/pci/linux/pci_vfio.c +++ b/drivers/bus/pci/linux/pci_vfio.c @@ -34,7 +34,6 @@ * This code tries to determine if the PCI device is bound to VFIO driver, * and initialize it (map BARs, set up interrupts) if that's the case. * - * This file is only compiled if CONFIG_RTE_EAL_VFIO is set to "y". */ #ifdef VFIO_PRESENT diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c index fe7f9200c1..60b33d20a1 100644 --- a/drivers/net/i40e/i40e_rxtx.c +++ b/drivers/net/i40e/i40e_rxtx.c @@ -3438,7 +3438,6 @@ i40e_set_default_pctype_table(struct rte_eth_dev *dev) } #ifndef RTE_LIBRTE_I40E_INC_VECTOR -/* Stubs needed for linkage when CONFIG_RTE_LIBRTE_I40E_INC_VECTOR is set to 'n' */ int i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev __rte_unused *dev) { diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h index 9e0ee052b3..6ad7e31170 100644 --- a/lib/librte_mempool/rte_mempool.h +++ b/lib/librte_mempool/rte_mempool.h @@ -970,7 +970,7 @@ typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *); * If cache_size is non-zero, the rte_mempool library will try to * limit the accesses to the common lockless pool, by maintaining a * per-lcore object cache. This argument must be lower or equal to - * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose + * RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose * cache_size to have "n modulo cache_size == 0": if this is * not the case, some elements will always stay in the pool and will * never be used. The access to the per-lcore table is of course diff --git a/lib/librte_ring/rte_ring_elem.h b/lib/librte_ring/rte_ring_elem.h index 69dc51746c..938b398fc0 100644 --- a/lib/librte_ring/rte_ring_elem.h +++ b/lib/librte_ring/rte_ring_elem.h @@ -373,8 +373,7 @@ __rte_ring_dequeue_elems(struct rte_ring *r, uint32_t cons_head, * (powerpc/arm). * There are 2 choices for the users * 1.use rmb() memory barrier - * 2.use one-direction load_acquire/store_release barrier,defined by - * CONFIG_RTE_USE_C11_MEM_MODEL=y + * 2.use one-direction load_acquire/store_release barrier * It depends on performance test results. * By default, move common functions to rte_ring_generic.h */