From: Alejandro Lucero Date: Tue, 11 Dec 2018 12:01:59 +0000 (+0000) Subject: net/nfp: support multiprocess X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=ef28aa96e53bc528a499acb866302280393783a0;p=dpdk.git net/nfp: support multiprocess This patch introduces changes for supporting multiprocess support. This is trivial for VFs but comes with some limitations for the PF. Due to restrictions when using NFP CPP interface, just one secondary process is supported by now for the PF. Signed-off-by: Alejandro Lucero --- diff --git a/doc/guides/nics/features/nfp.ini b/doc/guides/nics/features/nfp.ini index d2899e7fb9..70297b0907 100644 --- a/doc/guides/nics/features/nfp.ini +++ b/doc/guides/nics/features/nfp.ini @@ -24,5 +24,6 @@ Basic stats = Y Stats per queue = Y Linux UIO = Y Linux VFIO = Y +Multiprocess aware = Y x86-64 = Y Usage doc = Y diff --git a/doc/guides/nics/features/nfp_vf.ini b/doc/guides/nics/features/nfp_vf.ini index d2899e7fb9..70297b0907 100644 --- a/doc/guides/nics/features/nfp_vf.ini +++ b/doc/guides/nics/features/nfp_vf.ini @@ -24,5 +24,6 @@ Basic stats = Y Stats per queue = Y Linux UIO = Y Linux VFIO = Y +Multiprocess aware = Y x86-64 = Y Usage doc = Y diff --git a/doc/guides/nics/nfp.rst b/doc/guides/nics/nfp.rst index 927c03c63b..3bfb0ef614 100644 --- a/doc/guides/nics/nfp.rst +++ b/doc/guides/nics/nfp.rst @@ -145,6 +145,18 @@ is no support for RX interrupts and it is not possible either to use those PF ports with the device hotplug functionality. +PF multiprocess support +----------------------- + +Due to how the driver needs to access the NFP through a CPP interface, which implies +to use specific registers inside the chip, the number of secondary proceses with PF +ports is limitted to only one. + +This limitation will be solved in future versions but having basic multiprocess support +is important for allowing development and debugging through the PF using a secondary +process which will create a CPP bridge for user space tools accessing the NFP. + + System configuration -------------------- diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c index 54c6da9243..ffef97d80e 100644 --- a/drivers/net/nfp/nfp_net.c +++ b/drivers/net/nfp/nfp_net.c @@ -766,9 +766,12 @@ nfp_net_start(struct rte_eth_dev *dev) goto error; } - if (hw->is_pf) + if (hw->is_pf && rte_eal_process_type() == RTE_PROC_PRIMARY) /* Configure the physical port up */ nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 1); + else + nfp_eth_set_configured(dev->process_private, + hw->pf_port_idx, 1); hw->ctrl = new_ctrl; @@ -817,9 +820,12 @@ nfp_net_stop(struct rte_eth_dev *dev) (struct nfp_net_rxq *)dev->data->rx_queues[i]); } - if (hw->is_pf) + if (hw->is_pf && rte_eal_process_type() == RTE_PROC_PRIMARY) /* Configure the physical port down */ nfp_eth_set_configured(hw->cpp, hw->pf_port_idx, 0); + else + nfp_eth_set_configured(dev->process_private, + hw->pf_port_idx, 0); } /* Reset and stop device. The device can not be restarted. */ @@ -2918,16 +2924,16 @@ nfp_net_init(struct rte_eth_dev *eth_dev) hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2], hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]); - /* Registering LSC interrupt handler */ - rte_intr_callback_register(&pci_dev->intr_handle, - nfp_net_dev_interrupt_handler, - (void *)eth_dev); - - /* Telling the firmware about the LSC interrupt entry */ - nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX); - - /* Recording current stats counters values */ - nfp_net_stats_reset(eth_dev); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + /* Registering LSC interrupt handler */ + rte_intr_callback_register(&pci_dev->intr_handle, + nfp_net_dev_interrupt_handler, + (void *)eth_dev); + /* Telling the firmware about the LSC interrupt entry */ + nn_cfg_writeb(hw, NFP_NET_CFG_LSC, NFP_NET_IRQ_LSC_IDX); + /* Recording current stats counters values */ + nfp_net_stats_reset(eth_dev); + } return 0; @@ -2947,7 +2953,7 @@ nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports, struct rte_eth_dev *eth_dev; struct nfp_net_hw *hw; char *port_name; - int ret; + int retval; port_name = rte_zmalloc("nfp_pf_port_name", 100, 0); if (!port_name) @@ -2958,51 +2964,76 @@ nfp_pf_create_dev(struct rte_pci_device *dev, int port, int ports, else sprintf(port_name, "%s", dev->device.name); - eth_dev = rte_eth_dev_allocate(port_name); - if (!eth_dev) - return -ENOMEM; - if (port == 0) { - *priv = rte_zmalloc(port_name, - sizeof(struct nfp_net_adapter) * ports, - RTE_CACHE_LINE_SIZE); - if (!*priv) { - rte_eth_dev_release_port(eth_dev); - return -ENOMEM; + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + eth_dev = rte_eth_dev_allocate(port_name); + if (!eth_dev) { + rte_free(port_name); + return -ENODEV; } - } - - eth_dev->data->dev_private = *priv; - - /* - * dev_private pointing to port0 dev_private because we need - * to configure vNIC bars based on port0 at nfp_net_init. - * Then dev_private is adjusted per port. - */ - hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port; - hw->cpp = cpp; - hw->hwinfo = hwinfo; - hw->sym_tbl = sym_tbl; - hw->pf_port_idx = phys_port; - hw->is_pf = 1; - if (ports > 1) - hw->pf_multiport_enabled = 1; + if (port == 0) { + *priv = rte_zmalloc(port_name, + sizeof(struct nfp_net_adapter) * + ports, RTE_CACHE_LINE_SIZE); + if (!*priv) { + rte_free(port_name); + rte_eth_dev_release_port(eth_dev); + return -ENOMEM; + } + } + eth_dev->data->dev_private = *priv; - hw->total_ports = ports; + /* + * dev_private pointing to port0 dev_private because we need + * to configure vNIC bars based on port0 at nfp_net_init. + * Then dev_private is adjusted per port. + */ + hw = (struct nfp_net_hw *)(eth_dev->data->dev_private) + port; + hw->cpp = cpp; + hw->hwinfo = hwinfo; + hw->sym_tbl = sym_tbl; + hw->pf_port_idx = phys_port; + hw->is_pf = 1; + if (ports > 1) + hw->pf_multiport_enabled = 1; + + hw->total_ports = ports; + } else { + eth_dev = rte_eth_dev_attach_secondary(port_name); + if (!eth_dev) { + RTE_LOG(ERR, EAL, "secondary process attach failed, " + "ethdev doesn't exist"); + rte_free(port_name); + return -ENODEV; + } + eth_dev->process_private = cpp; + } eth_dev->device = &dev->device; rte_eth_copy_pci_info(eth_dev, dev); - ret = nfp_net_init(eth_dev); + retval = nfp_net_init(eth_dev); - if (ret) - rte_eth_dev_release_port(eth_dev); - else + if (retval) { + retval = -ENODEV; + goto probe_failed; + } else { rte_eth_dev_probing_finish(eth_dev); + } rte_free(port_name); - return ret; + return retval; + +probe_failed: + rte_free(port_name); + /* free ports private data if primary process */ + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_free(eth_dev->data->dev_private); + + rte_eth_dev_release_port(eth_dev); + + return retval; } #define DEFAULT_FW_PATH "/lib/firmware/netronome" @@ -3180,10 +3211,12 @@ static int nfp_pf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, return -EIO; } - if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) { - PMD_DRV_LOG(INFO, "Error when uploading firmware"); - ret = -EIO; - goto error; + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + if (nfp_fw_setup(dev, cpp, nfp_eth_table, hwinfo)) { + PMD_DRV_LOG(INFO, "Error when uploading firmware"); + ret = -EIO; + goto error; + } } /* Now the symbol table should be there */ diff --git a/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c b/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c index c68d9400f9..39bd48a836 100644 --- a/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c +++ b/drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c @@ -112,6 +112,7 @@ struct nfp_pcie_user { int device; int lock; + int secondary_lock; char busdev[BUSDEV_SZ]; int barsz; char *cfg; @@ -290,14 +291,32 @@ nfp_reconfigure_bar(struct nfp_pcie_user *nfp, struct nfp_bar *bar, int tgt, * already mapped. * * BAR0.0: Reserved for General Mapping (for MSI-X access to PCIe SRAM) + * + * Halving PCItoCPPBars for primary and secondary processes. + * NFP PMD just requires two fixed slots, one for configuration BAR, + * and another for accessing the hw queues. Another slot is needed + * for setting the link up or down. Secondary processes do not need + * to map the first two slots again, but it requires one slot for + * accessing the link, even if it is not likely the secondary process + * starting the port. This implies a limit of secondary processes + * supported. Due to this requirement and future extensions requiring + * new slots per process, only one secondary process is supported by + * now. */ static int nfp_enable_bars(struct nfp_pcie_user *nfp) { struct nfp_bar *bar; - int x; + int x, start, end; - for (x = ARRAY_SIZE(nfp->bar); x > 0; x--) { + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + start = 4; + end = 1; + } else { + start = 7; + end = 4; + } + for (x = start; x > end; x--) { bar = &nfp->bar[x - 1]; bar->barcfg = 0; bar->nfp = nfp; @@ -320,9 +339,16 @@ static struct nfp_bar * nfp_alloc_bar(struct nfp_pcie_user *nfp) { struct nfp_bar *bar; - int x; + int x, start, end; - for (x = ARRAY_SIZE(nfp->bar); x > 0; x--) { + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + start = 4; + end = 1; + } else { + start = 7; + end = 4; + } + for (x = start; x > end; x--) { bar = &nfp->bar[x - 1]; if (!bar->lock) { bar->lock = 1; @@ -336,9 +362,17 @@ static void nfp_disable_bars(struct nfp_pcie_user *nfp) { struct nfp_bar *bar; - int x; + int x, start, end; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + start = 4; + end = 1; + } else { + start = 7; + end = 4; + } - for (x = ARRAY_SIZE(nfp->bar); x > 0; x--) { + for (x = start; x > end; x--) { bar = &nfp->bar[x - 1]; if (bar->iomem) { bar->iomem = NULL; @@ -633,6 +667,47 @@ nfp_acquire_process_lock(struct nfp_pcie_user *desc) return 0; } +static int +nfp_acquire_secondary_process_lock(struct nfp_pcie_user *desc) +{ + int rc; + struct flock lock; + const char *lockname = "/.lock_nfp_secondary"; + char *home_path; + char *lockfile; + + memset(&lock, 0, sizeof(lock)); + + /* + * Using user's home directory. Note this can be called in a DPDK app + * being executed as non-root. This is not the case for the previous + * function nfp_acquire_process_lock which is invoked only when UIO + * driver is used because that implies root user. + */ + home_path = getenv("HOME"); + lockfile = calloc(strlen(home_path) + strlen(lockname) + 1, + sizeof(char)); + + strcat(lockfile, home_path); + strcat(lockfile, "/.lock_nfp_secondary"); + desc->secondary_lock = open(lockfile, O_RDWR | O_CREAT | O_NONBLOCK, + 0666); + if (desc->secondary_lock < 0) { + RTE_LOG(ERR, PMD, "NFP lock for secondary process failed\n"); + return desc->secondary_lock; + } + + lock.l_type = F_WRLCK; + lock.l_whence = SEEK_SET; + rc = fcntl(desc->secondary_lock, F_SETLK, &lock); + if (rc < 0) { + RTE_LOG(ERR, PMD, "NFP lock for secondary process failed\n"); + close(desc->secondary_lock); + } + + return rc; +} + static int nfp6000_set_model(struct rte_pci_device *dev, struct nfp_cpp *cpp) { @@ -774,7 +849,6 @@ static int nfp6000_init(struct nfp_cpp *cpp, struct rte_pci_device *dev) { int ret = 0; - uint32_t model; struct nfp_pcie_user *desc; desc = malloc(sizeof(*desc)); @@ -785,12 +859,20 @@ nfp6000_init(struct nfp_cpp *cpp, struct rte_pci_device *dev) memset(desc->busdev, 0, BUSDEV_SZ); strlcpy(desc->busdev, dev->device.name, sizeof(desc->busdev)); - if (cpp->driver_lock_needed) { + if (rte_eal_process_type() == RTE_PROC_PRIMARY && + cpp->driver_lock_needed) { ret = nfp_acquire_process_lock(desc); if (ret) return -1; } + /* Just support for one secondary process */ + if (rte_eal_process_type() != RTE_PROC_PRIMARY) { + ret = nfp_acquire_secondary_process_lock(desc); + if (ret) + return -1; + } + if (nfp6000_set_model(dev, cpp) < 0) return -1; if (nfp6000_set_interface(dev, cpp) < 0) @@ -806,9 +888,6 @@ nfp6000_init(struct nfp_cpp *cpp, struct rte_pci_device *dev) nfp_cpp_priv_set(cpp, desc); - model = __nfp_cpp_model_autodetect(cpp); - nfp_cpp_model_set(cpp, model); - return ret; } @@ -820,6 +899,8 @@ nfp6000_free(struct nfp_cpp *cpp) nfp_disable_bars(desc); if (cpp->driver_lock_needed) close(desc->lock); + if (rte_eal_process_type() != RTE_PROC_PRIMARY) + close(desc->secondary_lock); close(desc->device); free(desc); }