From: Wisam Jaddo Date: Mon, 31 Dec 2018 12:43:48 +0000 (+0000) Subject: net/mlx5: add ConnectX-6 device IDs X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=f0354d842344b976182e540044a2d5131ec94b6b;p=dpdk.git net/mlx5: add ConnectX-6 device IDs This commit includes the add of: - ConnectX-6 device ID - ConnectX-6 SRIOV device ID Signed-off-by: Wisam Jaddo Acked-by: Shahaf Shuler --- diff --git a/config/common_base b/config/common_base index 0e3f900c52..964a6956e4 100644 --- a/config/common_base +++ b/config/common_base @@ -323,8 +323,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n # -# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield -# (MLX5) PMD +# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5, +# ConnectX-6 & Bluefield (MLX5) PMD # CONFIG_RTE_LIBRTE_MLX5_PMD=n CONFIG_RTE_LIBRTE_MLX5_DEBUG=n diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index 2c516fe2b7..add8bc1ed6 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -7,8 +7,9 @@ MLX5 poll mode driver The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox -ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s -adapters as well as their virtual functions (VF) in SR-IOV context. +ConnectX-5**, **Mellanox ConnectX-6** and **Mellanox Bluefield** families +of 10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF) +in SR-IOV context. Information and documentation about these adapters can be found on the `Mellanox website `__. Help is also provided by the @@ -274,8 +275,8 @@ Run-time configuration Supported on: - - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield. - - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield. + - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and Bluefield. + - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5, ConnectX-6 and Bluefield. - ``rxq_cqe_pad_en`` parameter [int] @@ -359,13 +360,13 @@ Run-time configuration This option should be used in combination with ``txq_inline`` above. - On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without + On ConnectX-4, ConnectX-4 LX, ConnectX-5, ConnectX-6 and Bluefield without Enhanced MPW: - Disabled by default. - In case ``txq_inline`` is set recommendation is 4. - On ConnectX-5 and Bluefield with Enhanced MPW: + On ConnectX-5, ConnectX-6 and Bluefield with Enhanced MPW: - Set to 8 by default. @@ -386,7 +387,7 @@ Run-time configuration - ``txq_mpw_en`` parameter [int] A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and - enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefield. + enhanced multi-packet send (Enhanced MPS) for ConnectX-5, ConnectX-6 and Bluefield. MPS allows the TX burst function to pack up multiple packets in a single descriptor session in order to save PCI bandwidth and improve performance at the cost of a slightly higher CPU usage. When @@ -401,13 +402,13 @@ Run-time configuration DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield + It is currently only supported on the ConnectX-4 Lx, ConnectX-5, ConnectX-6 and Bluefield families of adapters. On ConnectX-4 Lx the MPW is considered un-secure hence disabled by default. Users which enable the MPW should be aware that application which provides incorrect mbuf descriptors in the Tx burst can lead to serious errors in the host including, on some cases, NIC to get stuck. - On ConnectX-5 and Bluefield the MPW is secure and enabled by default. + On ConnectX-5, ConnectX-6 and Bluefield the MPW is secure and enabled by default. - ``txq_mpw_hdr_dseg_en`` parameter [int] @@ -427,14 +428,14 @@ Run-time configuration - ``tx_vec_en`` parameter [int] - A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of + A nonzero value enables Tx vector on ConnectX-5, ConnectX-6 and Bluefield NICs if the number of global Tx queues on the port is less than ``txqs_max_vec``. This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - Enabled by default on ConnectX-5 and Bluefield. + Enabled by default on ConnectX-5, ConnectX-6 and Bluefield. - ``rx_vec_en`` parameter [int] @@ -518,7 +519,7 @@ DPDK and must be installed separately: - **libmlx5** Low-level user space driver library for Mellanox - ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded + ConnectX-4/ConnectX-5/ConnectX-6/Bluefield devices, it is automatically loaded by libibverbs. This library basically implements send/receive calls to the hardware @@ -540,7 +541,7 @@ DPDK and must be installed separately: their devices: - mlx5_core: hardware driver managing Mellanox - ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel + ConnectX-4/ConnectX-5/ConnectX-6/Bluefield devices and related Ethernet kernel network devices. - mlx5_ib: InifiniBand device driver. - ib_uverbs: user space driver for Verbs (entry point for libibverbs). @@ -548,7 +549,7 @@ DPDK and must be installed separately: - **Firmware update** Mellanox OFED releases include firmware updates for - ConnectX-4/ConnectX-5/Bluefield adapters. + ConnectX-4/ConnectX-5/ConnectX-6/Bluefield adapters. Because each release provides new features, these updates must be applied to match the kernel modules and libraries they come with. @@ -589,6 +590,7 @@ Mellanox OFED - ConnectX-4 Lx: **14.21.1000** and above. - ConnectX-5: **16.21.1000** and above. - ConnectX-5 Ex: **16.21.1000** and above. + - ConnectX-6: **20.99.5374** and above. - Bluefield: **18.99.3950** and above. While these libraries and kernel modules are available on OpenFabrics @@ -820,7 +822,7 @@ Usage example ------------- This section demonstrates how to launch **testpmd** with Mellanox -ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5. +ConnectX-4/ConnectX-5/ConnectX-6/Bluefield devices managed by librte_pmd_mlx5. #. Load the kernel modules: diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 9e5cab1697..45210451d7 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -1585,6 +1585,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF) }, + { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_CONNECTX6) + }, + { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_CONNECTX6VF) + }, { .vendor_id = 0 } diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index b2fe5cb34a..b48cd94909 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -52,6 +52,8 @@ enum { PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2, PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF = 0xa2d3, + PCI_DEVICE_ID_MELLANOX_CONNECTX6 = 0x101b, + PCI_DEVICE_ID_MELLANOX_CONNECTX6VF = 0x101c, }; /** Switch information returned by mlx5_nl_switch_info(). */