From: Bernard Iremonger Date: Wed, 26 Oct 2016 15:28:40 +0000 (+0100) Subject: net/ixgbe: support multiqueue mode VMDq DCB with SRIOV X-Git-Tag: spdx-start~5428 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=f3f9b17bb8a5d90c204da4c077f895d692426c0a;p=dpdk.git net/ixgbe: support multiqueue mode VMDq DCB with SRIOV Allow Data Center Bridge (DCB) configuration when SRIOV is enabled. Signed-off-by: Rahul R Shah Signed-off-by: Bernard Iremonger Acked-by: Wenzhuo Lu --- diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 316af73f3f..edc9b22cb8 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -1977,6 +1977,8 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev) /* check multi-queue mode */ switch (dev_conf->rxmode.mq_mode) { case ETH_MQ_RX_VMDQ_DCB: + PMD_INIT_LOG(INFO, "ETH_MQ_RX_VMDQ_DCB mode supported in SRIOV"); + break; case ETH_MQ_RX_VMDQ_DCB_RSS: /* DCB/RSS VMDQ in SRIOV mode, not implement yet */ PMD_INIT_LOG(ERR, "SRIOV active," @@ -2012,11 +2014,9 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev) switch (dev_conf->txmode.mq_mode) { case ETH_MQ_TX_VMDQ_DCB: - /* DCB VMDQ in SRIOV mode, not implement yet */ - PMD_INIT_LOG(ERR, "SRIOV is active," - " unsupported VMDQ mq_mode tx %d.", - dev_conf->txmode.mq_mode); - return -EINVAL; + PMD_INIT_LOG(INFO, "ETH_MQ_TX_VMDQ_DCB mode supported in SRIOV"); + dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB; + break; default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */ dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY; break; diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 2ce8234e70..b2d9f45407 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -1,7 +1,7 @@ /*- * BSD LICENSE * - * Copyright(c) 2010-2015 Intel Corporation. All rights reserved. + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. * Copyright 2014 6WIND S.A. * All rights reserved. * @@ -3313,15 +3313,16 @@ ixgbe_vmdq_dcb_configure(struct rte_eth_dev *dev) /** * ixgbe_dcb_config_tx_hw_config - Configure general DCB TX parameters - * @hw: pointer to hardware structure + * @dev: pointer to eth_dev structure * @dcb_config: pointer to ixgbe_dcb_config structure */ static void -ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw, +ixgbe_dcb_tx_hw_config(struct rte_eth_dev *dev, struct ixgbe_dcb_config *dcb_config) { uint32_t reg; uint32_t q; + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); PMD_INIT_FUNC_TRACE(); if (hw->mac.type != ixgbe_mac_82598EB) { @@ -3340,10 +3341,17 @@ ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw, reg |= IXGBE_MTQC_VT_ENA; IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg); - /* Disable drop for all queues */ - for (q = 0; q < 128; q++) - IXGBE_WRITE_REG(hw, IXGBE_QDE, - (IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT))); + if (RTE_ETH_DEV_SRIOV(dev).active == 0) { + /* Disable drop for all queues in VMDQ mode*/ + for (q = 0; q < 128; q++) + IXGBE_WRITE_REG(hw, IXGBE_QDE, + (IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT))); + } else { + /* Enable drop for all queues in SRIOV mode */ + for (q = 0; q < 128; q++) + IXGBE_WRITE_REG(hw, IXGBE_QDE, + (IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT) | IXGBE_QDE_ENABLE)); + } /* Enable the Tx desc arbiter */ reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS); @@ -3378,7 +3386,7 @@ ixgbe_vmdq_dcb_hw_tx_config(struct rte_eth_dev *dev, vmdq_tx_conf->nb_queue_pools == ETH_16_POOLS ? 0xFFFF : 0xFFFFFFFF); /*Configure general DCB TX parameters*/ - ixgbe_dcb_tx_hw_config(hw, dcb_config); + ixgbe_dcb_tx_hw_config(dev, dcb_config); } static void @@ -3661,7 +3669,7 @@ ixgbe_dcb_hw_configure(struct rte_eth_dev *dev, /*get DCB TX configuration parameters from rte_eth_conf*/ ixgbe_dcb_tx_config(dev, dcb_config); /*Configure general DCB TX parameters*/ - ixgbe_dcb_tx_hw_config(hw, dcb_config); + ixgbe_dcb_tx_hw_config(dev, dcb_config); break; default: PMD_INIT_LOG(ERR, "Incorrect DCB TX mode configuration"); @@ -3810,7 +3818,7 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev) (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB_RSS)) return; - if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES) + if (dev->data->nb_rx_queues > ETH_DCB_NUM_QUEUES) return; /** Configure DCB hardware **/ @@ -4082,12 +4090,13 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev) case ETH_MQ_RX_VMDQ_RSS: ixgbe_config_vf_rss(dev); break; - - /* FIXME if support DCB/RSS together with VMDq & SRIOV */ case ETH_MQ_RX_VMDQ_DCB: + ixgbe_vmdq_dcb_configure(dev); + break; + /* FIXME if support DCB/RSS together with VMDq & SRIOV */ case ETH_MQ_RX_VMDQ_DCB_RSS: PMD_INIT_LOG(ERR, - "Could not support DCB with VMDq & SRIOV"); + "Could not support DCB/RSS with VMDq & SRIOV"); return -1; default: ixgbe_config_vf_default(dev);