From: Qiming Yang Date: Fri, 4 Nov 2016 09:10:50 +0000 (+0800) Subject: net/i40e: fix link status change interrupt X-Git-Tag: spdx-start~5371 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=f4668a33efe5311301e10bc6e3709a2eccb446ad;p=dpdk.git net/i40e: fix link status change interrupt Previously, link status interrupt in i40e is achieved by checking LINK_STAT_CHANGE_MASK in PFINT_ICR0 register which is provided only for diagnostic use. Instead, drivers need to get the link status change notification by using LSE (Link Status Event). This patch enables LSE and calls LSC callback when the event is received. This patch also removes the processing on LINK_STAT_CHANGE_MASK. Fixes: 4861cde46116 ("i40e: new poll mode driver") Signed-off-by: Qiming Yang Acked-by: Jingjing Wu --- diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c index 5dd162ee3d..0bf9bff181 100644 --- a/drivers/net/i40e/i40e_ethdev.c +++ b/drivers/net/i40e/i40e_ethdev.c @@ -108,7 +108,6 @@ I40E_PFINT_ICR0_ENA_GRST_MASK | \ I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK | \ I40E_PFINT_ICR0_ENA_STORM_DETECT_MASK | \ - I40E_PFINT_ICR0_ENA_LINK_STAT_CHANGE_MASK | \ I40E_PFINT_ICR0_ENA_HMC_ERR_MASK | \ I40E_PFINT_ICR0_ENA_PE_CRITERR_MASK | \ I40E_PFINT_ICR0_ENA_VFLR_MASK | \ @@ -1779,6 +1778,16 @@ i40e_dev_start(struct rte_eth_dev *dev) if (dev->data->dev_conf.intr_conf.lsc != 0) PMD_INIT_LOG(INFO, "lsc won't enable because of" " no intr multiplex\n"); + } else if (dev->data->dev_conf.intr_conf.lsc != 0) { + ret = i40e_aq_set_phy_int_mask(hw, + ~(I40E_AQ_EVENT_LINK_UPDOWN | + I40E_AQ_EVENT_MODULE_QUAL_FAIL | + I40E_AQ_EVENT_MEDIA_NA), NULL); + if (ret != I40E_SUCCESS) + PMD_DRV_LOG(WARNING, "Fail to set phy mask"); + + /* Call get_link_info aq commond to enable LSE */ + i40e_dev_link_update(dev, 0); } /* enable uio intr after callback register */ @@ -1997,6 +2006,7 @@ i40e_dev_link_update(struct rte_eth_dev *dev, struct rte_eth_link link, old; int status; unsigned rep_cnt = MAX_REPEAT_TIME; + bool enable_lse = dev->data->dev_conf.intr_conf.lsc ? true : false; memset(&link, 0, sizeof(link)); memset(&old, 0, sizeof(old)); @@ -2005,7 +2015,8 @@ i40e_dev_link_update(struct rte_eth_dev *dev, do { /* Get link status information from hardware */ - status = i40e_aq_get_link_info(hw, false, &link_status, NULL); + status = i40e_aq_get_link_info(hw, enable_lse, + &link_status, NULL); if (status != I40E_SUCCESS) { link.link_speed = ETH_SPEED_NUM_100M; link.link_duplex = ETH_LINK_FULL_DUPLEX; @@ -5467,6 +5478,12 @@ i40e_dev_handle_aq_msg(struct rte_eth_dev *dev) info.msg_buf, info.msg_len); break; + case i40e_aqc_opc_get_link_status: + ret = i40e_dev_link_update(dev, 0); + if (!ret) + _rte_eth_dev_callback_process(dev, + RTE_ETH_EVENT_INTR_LSC, NULL); + break; default: PMD_DRV_LOG(ERR, "Request %u is not supported yet", opcode); @@ -5476,57 +5493,6 @@ i40e_dev_handle_aq_msg(struct rte_eth_dev *dev) rte_free(info.msg_buf); } -/* - * Interrupt handler is registered as the alarm callback for handling LSC - * interrupt in a definite of time, in order to wait the NIC into a stable - * state. Currently it waits 1 sec in i40e for the link up interrupt, and - * no need for link down interrupt. - */ -static void -i40e_dev_interrupt_delayed_handler(void *param) -{ - struct rte_eth_dev *dev = (struct rte_eth_dev *)param; - struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private); - uint32_t icr0; - - /* read interrupt causes again */ - icr0 = I40E_READ_REG(hw, I40E_PFINT_ICR0); - -#ifdef RTE_LIBRTE_I40E_DEBUG_DRIVER - if (icr0 & I40E_PFINT_ICR0_ECC_ERR_MASK) - PMD_DRV_LOG(ERR, "ICR0: unrecoverable ECC error\n"); - if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) - PMD_DRV_LOG(ERR, "ICR0: malicious programming detected\n"); - if (icr0 & I40E_PFINT_ICR0_GRST_MASK) - PMD_DRV_LOG(INFO, "ICR0: global reset requested\n"); - if (icr0 & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) - PMD_DRV_LOG(INFO, "ICR0: PCI exception\n activated\n"); - if (icr0 & I40E_PFINT_ICR0_STORM_DETECT_MASK) - PMD_DRV_LOG(INFO, "ICR0: a change in the storm control " - "state\n"); - if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) - PMD_DRV_LOG(ERR, "ICR0: HMC error\n"); - if (icr0 & I40E_PFINT_ICR0_PE_CRITERR_MASK) - PMD_DRV_LOG(ERR, "ICR0: protocol engine critical error\n"); -#endif /* RTE_LIBRTE_I40E_DEBUG_DRIVER */ - - if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) { - PMD_DRV_LOG(INFO, "INT:VF reset detected\n"); - i40e_dev_handle_vfr_event(dev); - } - if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) { - PMD_DRV_LOG(INFO, "INT:ADMINQ event\n"); - i40e_dev_handle_aq_msg(dev); - } - - /* handle the link up interrupt in an alarm callback */ - i40e_dev_link_update(dev, 0); - _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL); - - i40e_pf_enable_irq0(hw); - rte_intr_enable(&(dev->pci_dev->intr_handle)); -} - /** * Interrupt handler triggered by NIC for handling * specific interrupt. @@ -5584,30 +5550,6 @@ i40e_dev_interrupt_handler(__rte_unused struct rte_intr_handle *handle, i40e_dev_handle_aq_msg(dev); } - /* Link Status Change interrupt */ - if (icr0 & I40E_PFINT_ICR0_LINK_STAT_CHANGE_MASK) { -#define I40E_US_PER_SECOND 1000000 - struct rte_eth_link link; - - PMD_DRV_LOG(INFO, "ICR0: link status changed\n"); - memset(&link, 0, sizeof(link)); - rte_i40e_dev_atomic_read_link_status(dev, &link); - i40e_dev_link_update(dev, 0); - - /* - * For link up interrupt, it needs to wait 1 second to let the - * hardware be a stable state. Otherwise several consecutive - * interrupts can be observed. - * For link down interrupt, no need to wait. - */ - if (!link.link_status && rte_eal_alarm_set(I40E_US_PER_SECOND, - i40e_dev_interrupt_delayed_handler, (void *)dev) >= 0) - return; - else - _rte_eth_dev_callback_process(dev, - RTE_ETH_EVENT_INTR_LSC, NULL); - } - done: /* Enable interrupt */ i40e_pf_enable_irq0(hw);