From: Xiaoyu Min Date: Thu, 7 May 2020 00:51:59 +0000 (+0300) Subject: app/testpmd: add option for Rx multi-queue mode X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=f9295aa22051921a15f107b740682711ff43fb47;p=dpdk.git app/testpmd: add option for Rx multi-queue mode One new cmdline option `--rx-mq-mode` is added in order to have the possibility to check whether PMD handle the mq mode correctly or not. The reason is some NICs need to do different settings based on different RX mq mode, i.e RSS or not. With this support in testpmd, the above scenario can be tested easily. Signed-off-by: Xiaoyu Min Acked-by: Bernard Iremonger --- diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 92b5575626..f761e14707 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -212,6 +212,8 @@ usage(char* progname) printf(" --noisy-lkup-num-writes=N: do N random reads and writes per packet\n"); printf(" --no-iova-contig: mempool memory can be IOVA non contiguous. " "valid only with --mp-alloc=anon\n"); + printf(" --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be " + "enabled\n"); } #ifdef RTE_LIBRTE_CMDLINE @@ -672,6 +674,7 @@ launch_args_parse(int argc, char** argv) { "noisy-lkup-num-reads", 1, 0, 0 }, { "noisy-lkup-num-reads-writes", 1, 0, 0 }, { "no-iova-contig", 0, 0, 0 }, + { "rx-mq-mode", 1, 0, 0 }, { 0, 0, 0, 0 }, }; @@ -1365,6 +1368,17 @@ launch_args_parse(int argc, char** argv) } if (!strcmp(lgopts[opt_idx].name, "no-iova-contig")) mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG; + + if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) { + char *end = NULL; + n = strtoul(optarg, &end, 16); + if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS) + rx_mq_mode = (enum rte_eth_rx_mq_mode)n; + else + rte_exit(EXIT_FAILURE, + "rx-mq-mode must be >= 0 and <= %d\n", + ETH_MQ_RX_VMDQ_DCB_RSS); + } break; case 'h': usage(argv[0]); diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index a2d0be56b3..4b13bf6a98 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -484,6 +484,11 @@ uint8_t bitrate_enabled; struct gro_status gro_ports[RTE_MAX_ETHPORTS]; uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES; +/* + * hexadecimal bitmask of RX mq mode can be enabled. + */ +enum rte_eth_rx_mq_mode rx_mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS; + /* Forward function declarations */ static void setup_attached_port(portid_t pi); static void map_port_queue_stats_mapping_registers(portid_t pi, @@ -3339,7 +3344,9 @@ init_port_config(void) if (port->dcb_flag == 0) { if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) - port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS; + port->dev_conf.rxmode.mq_mode = + (enum rte_eth_rx_mq_mode) + (rx_mq_mode & ETH_MQ_RX_RSS); else port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; } @@ -3440,7 +3447,9 @@ get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf, } /* set DCB mode of RX and TX of multiple queues */ - eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB; + eth_conf->rxmode.mq_mode = + (enum rte_eth_rx_mq_mode) + (rx_mq_mode & ETH_MQ_RX_VMDQ_DCB); eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB; } else { struct rte_eth_dcb_rx_conf *rx_conf = @@ -3460,7 +3469,9 @@ get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf, tx_conf->dcb_tc[i] = i % num_tcs; } - eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS; + eth_conf->rxmode.mq_mode = + (enum rte_eth_rx_mq_mode) + (rx_mq_mode & ETH_MQ_RX_DCB_RSS); eth_conf->rx_adv_conf.rss_conf = rss_conf; eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB; } diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index fb391672a8..a803750937 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -602,6 +602,8 @@ struct mplsoudp_decap_conf { }; extern struct mplsoudp_decap_conf mplsoudp_decap_conf; +extern enum rte_eth_rx_mq_mode rx_mq_mode; + static inline unsigned int lcore_num(void) { diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst index 1eb05c73e9..32ca4fa869 100644 --- a/doc/guides/rel_notes/release_20_05.rst +++ b/doc/guides/rel_notes/release_20_05.rst @@ -289,6 +289,11 @@ New Features ``l3fwd`` (The static code without any nodes) with the modular ``l3fwd-graph`` approach. +* **Updated testpmd application.** + + * Added a new cmdline option ``--rx-mq-mode`` which can be used to test PMD's + behaviour on handling Rx mq mode. + Removed Items ------------- diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst index 71213361b4..f169604752 100644 --- a/doc/guides/testpmd_app_ug/run_app.rst +++ b/doc/guides/testpmd_app_ug/run_app.rst @@ -481,3 +481,10 @@ The command line options are: Enable to create mempool which is not IOVA contiguous. Valid only with --mp-alloc=anon. The default value is 0. + +* ``--rx-mq-mode`` + + Set the hexadecimal bitmask of RX multi queue mode which can be enabled. + The default value is 0x7:: + + ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG | ETH_MQ_RX_VMDQ_FLAG