From: Helin Zhang Date: Tue, 8 Mar 2016 08:14:26 +0000 (+0800) Subject: i40e/base: support LED blinking with new PHY X-Git-Tag: spdx-start~7370 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=fd72a2284a89;p=dpdk.git i40e/base: support LED blinking with new PHY This patch adds functions to blink led on devices using a new PHY since MAC registers used in other designs do not work in this device configuration. Signed-off-by: Helin Zhang Acked-by: Jingjing Wu Acked-by: Remy Horton --- diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c index c800fd809a..238315315a 100644 --- a/drivers/net/i40e/base/i40e_common.c +++ b/drivers/net/i40e/base/i40e_common.c @@ -5969,6 +5969,335 @@ enum i40e_status_code i40e_aq_configure_partition_bw(struct i40e_hw *hw, return status; } + +/** + * i40e_read_phy_register + * @hw: pointer to the HW structure + * @page: registers page number + * @reg: register address in the page + * @phy_adr: PHY address on MDIO interface + * @value: PHY register value + * + * Reads specified PHY register value + **/ +enum i40e_status_code i40e_read_phy_register(struct i40e_hw *hw, + u8 page, u16 reg, u8 phy_addr, + u16 *value) +{ + enum i40e_status_code status = I40E_ERR_TIMEOUT; + u32 command = 0; + u16 retry = 1000; + u8 port_num = (u8)hw->func_caps.mdio_port_num; + + command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) | + (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | + (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | + (I40E_MDIO_OPCODE_ADDRESS) | + (I40E_MDIO_STCODE) | + (I40E_GLGEN_MSCA_MDICMD_MASK) | + (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); + wr32(hw, I40E_GLGEN_MSCA(port_num), command); + do { + command = rd32(hw, I40E_GLGEN_MSCA(port_num)); + if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { + status = I40E_SUCCESS; + break; + } + i40e_usec_delay(10); + retry--; + } while (retry); + + if (status) { + i40e_debug(hw, I40E_DEBUG_PHY, + "PHY: Can't write command to external PHY.\n"); + goto phy_read_end; + } + + command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | + (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | + (I40E_MDIO_OPCODE_READ) | + (I40E_MDIO_STCODE) | + (I40E_GLGEN_MSCA_MDICMD_MASK) | + (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); + status = I40E_ERR_TIMEOUT; + retry = 1000; + wr32(hw, I40E_GLGEN_MSCA(port_num), command); + do { + command = rd32(hw, I40E_GLGEN_MSCA(port_num)); + if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { + status = I40E_SUCCESS; + break; + } + i40e_usec_delay(10); + retry--; + } while (retry); + + if (!status) { + command = rd32(hw, I40E_GLGEN_MSRWD(port_num)); + *value = (command & I40E_GLGEN_MSRWD_MDIRDDATA_MASK) >> + I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT; + } else { + i40e_debug(hw, I40E_DEBUG_PHY, + "PHY: Can't read register value from external PHY.\n"); + } + +phy_read_end: + return status; +} + +/** + * i40e_write_phy_register + * @hw: pointer to the HW structure + * @page: registers page number + * @reg: register address in the page + * @phy_adr: PHY address on MDIO interface + * @value: PHY register value + * + * Writes value to specified PHY register + **/ +enum i40e_status_code i40e_write_phy_register(struct i40e_hw *hw, + u8 page, u16 reg, u8 phy_addr, + u16 value) +{ + enum i40e_status_code status = I40E_ERR_TIMEOUT; + u32 command = 0; + u16 retry = 1000; + u8 port_num = (u8)hw->func_caps.mdio_port_num; + + command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) | + (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | + (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | + (I40E_MDIO_OPCODE_ADDRESS) | + (I40E_MDIO_STCODE) | + (I40E_GLGEN_MSCA_MDICMD_MASK) | + (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); + wr32(hw, I40E_GLGEN_MSCA(port_num), command); + do { + command = rd32(hw, I40E_GLGEN_MSCA(port_num)); + if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { + status = I40E_SUCCESS; + break; + } + i40e_usec_delay(10); + retry--; + } while (retry); + if (status) { + i40e_debug(hw, I40E_DEBUG_PHY, + "PHY: Can't write command to external PHY.\n"); + goto phy_write_end; + } + + command = value << I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT; + wr32(hw, I40E_GLGEN_MSRWD(port_num), command); + + command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | + (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | + (I40E_MDIO_OPCODE_WRITE) | + (I40E_MDIO_STCODE) | + (I40E_GLGEN_MSCA_MDICMD_MASK) | + (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); + status = I40E_ERR_TIMEOUT; + retry = 1000; + wr32(hw, I40E_GLGEN_MSCA(port_num), command); + do { + command = rd32(hw, I40E_GLGEN_MSCA(port_num)); + if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { + status = I40E_SUCCESS; + break; + } + i40e_usec_delay(10); + retry--; + } while (retry); + +phy_write_end: + return status; +} + +/** + * i40e_get_phy_address + * @hw: pointer to the HW structure + * @dev_num: PHY port num that address we want + * @phy_addr: Returned PHY address + * + * Gets PHY address for current port + **/ +u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num) +{ + u8 port_num = (u8)hw->func_caps.mdio_port_num; + u32 reg_val = rd32(hw, I40E_GLGEN_MDIO_I2C_SEL(port_num)); + + return (u8)(reg_val >> ((dev_num + 1) * 5)) & 0x1f; +} + +/** + * i40e_blink_phy_led + * @hw: pointer to the HW structure + * @time: time how long led will blinks in secs + * @interval: gap between LED on and off in msecs + * + * Blinks PHY link LED + **/ +enum i40e_status_code i40e_blink_phy_link_led(struct i40e_hw *hw, + u32 time, u32 interval) +{ + enum i40e_status_code status = I40E_SUCCESS; + u32 i; + u16 led_ctl = 0; + u16 gpio_led_port; + u16 led_reg; + u16 led_addr = I40E_PHY_LED_PROV_REG_1; + u8 phy_addr = 0; + u8 port_num; + + i = rd32(hw, I40E_PFGEN_PORTNUM); + port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); + phy_addr = i40e_get_phy_address(hw, port_num); + + for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++, + led_addr++) { + status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, &led_reg); + if (status) + goto phy_blinking_end; + led_ctl = led_reg; + if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) { + led_reg = 0; + status = i40e_write_phy_register(hw, + I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, + led_reg); + if (status) + goto phy_blinking_end; + break; + } + } + + if (time > 0 && interval > 0) { + for (i = 0; i < time * 1000; i += interval) { + status = i40e_read_phy_register(hw, + I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, + &led_reg); + if (status) + goto restore_config; + if (led_reg & I40E_PHY_LED_MANUAL_ON) + led_reg = 0; + else + led_reg = I40E_PHY_LED_MANUAL_ON; + status = i40e_write_phy_register(hw, + I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, + led_reg); + if (status) + goto restore_config; + i40e_msec_delay(interval); + } + } + +restore_config: + status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr, + phy_addr, led_ctl); + +phy_blinking_end: + return status; +} + +/** + * i40e_led_get_phy - return current on/off mode + * @hw: pointer to the hw struct + * @led_addr: address of led register to use + * @val: original value of register to use + * + **/ +enum i40e_status_code i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr, + u16 *val) +{ + enum i40e_status_code status = I40E_SUCCESS; + u16 gpio_led_port; + u8 phy_addr = 0; + u16 reg_val; + u16 temp_addr; + u8 port_num; + u32 i; + + temp_addr = I40E_PHY_LED_PROV_REG_1; + i = rd32(hw, I40E_PFGEN_PORTNUM); + port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); + phy_addr = i40e_get_phy_address(hw, port_num); + + for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++, + temp_addr++) { + status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, + temp_addr, phy_addr, ®_val); + if (status) + return status; + *val = reg_val; + if (reg_val & I40E_PHY_LED_LINK_MODE_MASK) { + *led_addr = temp_addr; + break; + } + } + return status; +} + +/** + * i40e_led_set_phy + * @hw: pointer to the HW structure + * @on: true or false + * @mode: original val plus bit for set or ignore + * Set led's on or off when controlled by the PHY + * + **/ +enum i40e_status_code i40e_led_set_phy(struct i40e_hw *hw, bool on, + u16 led_addr, u32 mode) +{ + enum i40e_status_code status = I40E_SUCCESS; + u16 led_ctl = 0; + u16 led_reg = 0; + u8 phy_addr = 0; + u8 port_num; + u32 i; + + i = rd32(hw, I40E_PFGEN_PORTNUM); + port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); + phy_addr = i40e_get_phy_address(hw, port_num); + + status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr, + phy_addr, &led_reg); + if (status) + return status; + led_ctl = led_reg; + if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) { + led_reg = 0; + status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, led_reg); + if (status) + return status; + } + status = i40e_read_phy_register(hw, I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, &led_reg); + if (status) + goto restore_config; + if (on) + led_reg = I40E_PHY_LED_MANUAL_ON; + else + led_reg = 0; + status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, led_reg); + if (status) + goto restore_config; + if (mode & I40E_PHY_LED_MODE_ORIG) { + led_ctl = (mode & I40E_PHY_LED_MODE_MASK); + status = i40e_write_phy_register(hw, + I40E_PHY_COM_REG_PAGE, + led_addr, phy_addr, led_ctl); + } + return status; +restore_config: + status = i40e_write_phy_register(hw, I40E_PHY_COM_REG_PAGE, led_addr, + phy_addr, led_ctl); + return status; +} #endif /* PF_DRIVER */ #ifdef VF_DRIVER diff --git a/drivers/net/i40e/base/i40e_prototype.h b/drivers/net/i40e/base/i40e_prototype.h index cbe99615ea..e0a409fb91 100644 --- a/drivers/net/i40e/base/i40e_prototype.h +++ b/drivers/net/i40e/base/i40e_prototype.h @@ -99,6 +99,12 @@ const char *i40e_stat_str(struct i40e_hw *hw, enum i40e_status_code stat_err); u32 i40e_led_get(struct i40e_hw *hw); void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink); +enum i40e_status_code i40e_led_set_phy(struct i40e_hw *hw, bool on, + u16 led_addr, u32 mode); +enum i40e_status_code i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr, + u16 *val); +enum i40e_status_code i40e_blink_phy_link_led(struct i40e_hw *hw, + u32 time, u32 interval); /* admin send queue commands */ @@ -527,4 +533,11 @@ enum i40e_status_code i40e_aq_get_wake_event_reason(struct i40e_hw *hw, u16 *wake_reason, struct i40e_asq_cmd_details *cmd_details); #endif +enum i40e_status_code i40e_read_phy_register(struct i40e_hw *hw, u8 page, + u16 reg, u8 phy_addr, u16 *value); +enum i40e_status_code i40e_write_phy_register(struct i40e_hw *hw, u8 page, + u16 reg, u8 phy_addr, u16 value); +u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num); +enum i40e_status_code i40e_blink_phy_link_led(struct i40e_hw *hw, + u32 time, u32 interval); #endif /* _I40E_PROTOTYPE_H_ */ diff --git a/drivers/net/i40e/base/i40e_type.h b/drivers/net/i40e/base/i40e_type.h index f566e30210..61ee1669cc 100644 --- a/drivers/net/i40e/base/i40e_type.h +++ b/drivers/net/i40e/base/i40e_type.h @@ -157,6 +157,22 @@ enum i40e_debug_mask { #define I40E_PCI_LINK_SPEED_5000 0x2 #define I40E_PCI_LINK_SPEED_8000 0x3 +#define I40E_MDIO_STCODE 0 +#define I40E_MDIO_OPCODE_ADDRESS 0 +#define I40E_MDIO_OPCODE_WRITE I40E_MASK(1, \ + I40E_GLGEN_MSCA_OPCODE_SHIFT) +#define I40E_MDIO_OPCODE_READ_INC_ADDR I40E_MASK(2, \ + I40E_GLGEN_MSCA_OPCODE_SHIFT) +#define I40E_MDIO_OPCODE_READ I40E_MASK(3, \ + I40E_GLGEN_MSCA_OPCODE_SHIFT) + +#define I40E_PHY_COM_REG_PAGE 0x1E +#define I40E_PHY_LED_LINK_MODE_MASK 0xF0 +#define I40E_PHY_LED_MANUAL_ON 0x100 +#define I40E_PHY_LED_PROV_REG_1 0xC430 +#define I40E_PHY_LED_MODE_MASK 0xFFFF +#define I40E_PHY_LED_MODE_ORIG 0x80000000 + /* Memory types */ enum i40e_memset_type { I40E_NONDMA_MEM = 0,