From: Anatoly Burakov Date: Fri, 13 Jun 2014 14:52:46 +0000 (+0100) Subject: vfio: DMA mapping X-Git-Tag: spdx-start~10730 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=ff0b67d1c868c19d1e6cea78f0cfaa1af5bed918;p=dpdk.git vfio: DMA mapping Adding code to support VFIO mapping (primary processes only). Most of the things are done via ioctl() calls on either /dev/vfio/vfio (the container) or a /dev/vfio/$GROUP_NR (IOMMU group). In a nutshell, the code does the following: 1. creates a VFIO container (an entity that allows sharing IOMMU DMA mappings between devices) 2. checks if a given PCI device is a member of an IOMMU group (if it's not, this indicates that the device isn't bound to VFIO) 3. calls open() the group file to obtain a group fd 4. checks if the group is viable (that is, if all the devices in the same IOMMU group are either bound to VFIO or not bound to anything) 5. adds the group to a container 6. sets up DMA mappings (only done once, mapping whole DPDK hugepage memory for DMA, with a 1:1 correspondence of IOVA to PA) 7. gets the actual PCI device fd from the group fd (can fail, which simply means that this particular device is not bound to VFIO) 8. maps BARs (MSI-X BAR cannot be mmaped, so skipping it) 9. sets up interrupt structures (but not enables them!) 10. enables PCI bus mastering Signed-off-by: Anatoly Burakov Tested-by: HuilongX Xu Tested-by: Waterman Cao Acked-by: Thomas Monjalon --- diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile index 00a2115816..91012fc065 100644 --- a/lib/librte_eal/linuxapp/eal/Makefile +++ b/lib/librte_eal/linuxapp/eal/Makefile @@ -58,6 +58,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_thread.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_log.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_pci.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_pci_uio.c +SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_pci_vfio.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_debug.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_lcore.c SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_timer.c @@ -87,6 +88,7 @@ CFLAGS_eal_log.o := -D_GNU_SOURCE CFLAGS_eal_common_log.o := -D_GNU_SOURCE CFLAGS_eal_hugepage_info.o := -D_GNU_SOURCE CFLAGS_eal_pci.o := -D_GNU_SOURCE +CFLAGS_eal_pci_vfio.o := -D_GNU_SOURCE CFLAGS_eal_common_whitelist.o := -D_GNU_SOURCE # workaround for a gcc bug with noreturn attribute diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c index 070bdc9051..faa4c93f93 100644 --- a/lib/librte_eal/linuxapp/eal/eal.c +++ b/lib/librte_eal/linuxapp/eal/eal.c @@ -649,6 +649,8 @@ eal_parse_args(int argc, char **argv) internal_config.force_sockets = 0; internal_config.syslog_facility = LOG_DAEMON; internal_config.xen_dom0_support = 0; + /* if set to NONE, interrupt mode is determined automatically */ + internal_config.vfio_intr_mode = RTE_INTR_MODE_NONE; #ifdef RTE_LIBEAL_USE_HPET internal_config.no_hpet = 0; #else diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c new file mode 100644 index 0000000000..867467b4ce --- /dev/null +++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c @@ -0,0 +1,709 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "eal_filesystem.h" +#include "eal_pci_init.h" +#include "eal_vfio.h" + +/** + * @file + * PCI probing under linux (VFIO version) + * + * This code tries to determine if the PCI device is bound to VFIO driver, + * and initialize it (map BARs, set up interrupts) if that's the case. + * + * This file is only compiled if CONFIG_RTE_EAL_VFIO is set to "y". + */ + +#ifdef VFIO_PRESENT + +#define VFIO_DIR "/dev/vfio" +#define VFIO_CONTAINER_PATH "/dev/vfio/vfio" +#define VFIO_GROUP_FMT "/dev/vfio/%u" +#define VFIO_GET_REGION_ADDR(x) ((uint64_t) x << 40ULL) + +/* per-process VFIO config */ +static struct vfio_config vfio_cfg; + +/* get PCI BAR number where MSI-X interrupts are */ +static int +pci_vfio_get_msix_bar(int fd, int *msix_bar) +{ + int ret; + uint32_t reg; + uint8_t cap_id, cap_offset; + + /* read PCI capability pointer from config space */ + ret = pread64(fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + PCI_CAPABILITY_LIST); + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot read capability pointer from PCI " + "config space!\n"); + return -1; + } + + /* we need first byte */ + cap_offset = reg & 0xFF; + + while (cap_offset) { + + /* read PCI capability ID */ + ret = pread64(fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + cap_offset); + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot read capability ID from PCI " + "config space!\n"); + return -1; + } + + /* we need first byte */ + cap_id = reg & 0xFF; + + /* if we haven't reached MSI-X, check next capability */ + if (cap_id != PCI_CAP_ID_MSIX) { + ret = pread64(fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + cap_offset); + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot read capability pointer from PCI " + "config space!\n"); + return -1; + } + + /* we need second byte */ + cap_offset = (reg & 0xFF00) >> 8; + + continue; + } + /* else, read table offset */ + else { + /* table offset resides in the next 4 bytes */ + ret = pread64(fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + cap_offset + 4); + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot read table offset from PCI config " + "space!\n"); + return -1; + } + + *msix_bar = reg & RTE_PCI_MSIX_TABLE_BIR; + + return 0; + } + } + return 0; +} + +/* set PCI bus mastering */ +static int +pci_vfio_set_bus_master(int dev_fd) +{ + uint16_t reg; + int ret; + + ret = pread64(dev_fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + PCI_COMMAND); + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot read command from PCI config space!\n"); + return -1; + } + + /* set the master bit */ + reg |= PCI_COMMAND_MASTER; + + ret = pwrite64(dev_fd, ®, sizeof(reg), + VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + + PCI_COMMAND); + + if (ret != sizeof(reg)) { + RTE_LOG(ERR, EAL, "Cannot write command to PCI config space!\n"); + return -1; + } + + return 0; +} + +/* set up DMA mappings */ +static int +pci_vfio_setup_dma_maps(int vfio_container_fd) +{ + const struct rte_memseg *ms = rte_eal_get_physmem_layout(); + int i, ret; + + ret = ioctl(vfio_container_fd, VFIO_SET_IOMMU, + VFIO_TYPE1_IOMMU); + if (ret) { + RTE_LOG(ERR, EAL, " cannot set IOMMU type!\n"); + return -1; + } + + /* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */ + for (i = 0; i < RTE_MAX_MEMSEG; i++) { + struct vfio_iommu_type1_dma_map dma_map; + + if (ms[i].addr == NULL) + break; + + memset(&dma_map, 0, sizeof(dma_map)); + dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map); + dma_map.vaddr = ms[i].addr_64; + dma_map.size = ms[i].len; + dma_map.iova = ms[i].phys_addr; + dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE; + + ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map); + + if (ret) { + RTE_LOG(ERR, EAL, " cannot set up DMA remapping!\n"); + return -1; + } + } + + return 0; +} + +/* set up interrupt support (but not enable interrupts) */ +static int +pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd) +{ + int i, ret, intr_idx; + + /* default to invalid index */ + intr_idx = VFIO_PCI_NUM_IRQS; + + /* get interrupt type from internal config (MSI-X by default, can be + * overriden from the command line + */ + switch (internal_config.vfio_intr_mode) { + case RTE_INTR_MODE_MSIX: + intr_idx = VFIO_PCI_MSIX_IRQ_INDEX; + break; + case RTE_INTR_MODE_MSI: + intr_idx = VFIO_PCI_MSI_IRQ_INDEX; + break; + case RTE_INTR_MODE_LEGACY: + intr_idx = VFIO_PCI_INTX_IRQ_INDEX; + break; + /* don't do anything if we want to automatically determine interrupt type */ + case RTE_INTR_MODE_NONE: + break; + default: + RTE_LOG(ERR, EAL, " unknown default interrupt type!\n"); + return -1; + } + + /* start from MSI-X interrupt type */ + for (i = VFIO_PCI_MSIX_IRQ_INDEX; i >= 0; i--) { + struct vfio_irq_info irq = { .argsz = sizeof(irq) }; + int fd = -1; + + /* skip interrupt modes we don't want */ + if (internal_config.vfio_intr_mode != RTE_INTR_MODE_NONE && + i != intr_idx) + continue; + + irq.index = i; + + ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_IRQ_INFO, &irq); + if (ret < 0) { + RTE_LOG(ERR, EAL, " cannot get IRQ info!\n"); + return -1; + } + + /* if this vector cannot be used with eventfd, fail if we explicitly + * specified interrupt type, otherwise continue */ + if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0) { + if (internal_config.vfio_intr_mode != RTE_INTR_MODE_NONE) { + RTE_LOG(ERR, EAL, + " interrupt vector does not support eventfd!\n"); + return -1; + } else + continue; + } + + /* set up an eventfd for interrupts */ + fd = eventfd(0, 0); + if (fd < 0) { + RTE_LOG(ERR, EAL, " cannot set up eventfd!\n"); + return -1; + } + + dev->intr_handle.fd = fd; + dev->intr_handle.vfio_dev_fd = vfio_dev_fd; + + switch (i) { + case VFIO_PCI_MSIX_IRQ_INDEX: + internal_config.vfio_intr_mode = RTE_INTR_MODE_MSIX; + dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX; + break; + case VFIO_PCI_MSI_IRQ_INDEX: + internal_config.vfio_intr_mode = RTE_INTR_MODE_MSI; + dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSI; + break; + case VFIO_PCI_INTX_IRQ_INDEX: + internal_config.vfio_intr_mode = RTE_INTR_MODE_LEGACY; + dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_LEGACY; + break; + default: + RTE_LOG(ERR, EAL, " unknown interrupt type!\n"); + return -1; + } + + return 0; + } + + /* if we're here, we haven't found a suitable interrupt vector */ + return -1; +} + +/* open container fd or get an existing one */ +static int +pci_vfio_get_container_fd(void) +{ + int ret, vfio_container_fd; + + /* if we're in a primary process, try to open the container */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + vfio_container_fd = open(VFIO_CONTAINER_PATH, O_RDWR); + if (vfio_container_fd < 0) { + RTE_LOG(ERR, EAL, " cannot open VFIO container!\n"); + return -1; + } + + /* check VFIO API version */ + ret = ioctl(vfio_container_fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + RTE_LOG(ERR, EAL, " unknown VFIO API version!\n"); + close(vfio_container_fd); + return -1; + } + + /* check if we support IOMMU type 1 */ + ret = ioctl(vfio_container_fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU); + if (!ret) { + RTE_LOG(ERR, EAL, " unknown IOMMU driver!\n"); + close(vfio_container_fd); + return -1; + } + + return vfio_container_fd; + } + + return -1; +} + +/* open group fd or get an existing one */ +static int +pci_vfio_get_group_fd(int iommu_group_no) +{ + int i; + int vfio_group_fd; + char filename[PATH_MAX]; + + /* check if we already have the group descriptor open */ + for (i = 0; i < vfio_cfg.vfio_group_idx; i++) + if (vfio_cfg.vfio_groups[i].group_no == iommu_group_no) + return vfio_cfg.vfio_groups[i].fd; + + /* if primary, try to open the group */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + rte_snprintf(filename, sizeof(filename), + VFIO_GROUP_FMT, iommu_group_no); + vfio_group_fd = open(filename, O_RDWR); + if (vfio_group_fd < 0) { + /* if file not found, it's not an error */ + if (errno != ENOENT) { + RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename, + strerror(errno)); + return -1; + } + return 0; + } + + /* if the fd is valid, create a new group for it */ + if (vfio_cfg.vfio_group_idx == VFIO_MAX_GROUPS) { + RTE_LOG(ERR, EAL, "Maximum number of VFIO groups reached!\n"); + return -1; + } + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd; + return vfio_group_fd; + } + return -1; +} + +/* parse IOMMU group number for a PCI device + * returns -1 for errors, 0 for non-existent group */ +static int +pci_vfio_get_group_no(const char *pci_addr) +{ + char linkname[PATH_MAX]; + char filename[PATH_MAX]; + char *tok[16], *group_tok, *end; + int ret, iommu_group_no; + + memset(linkname, 0, sizeof(linkname)); + memset(filename, 0, sizeof(filename)); + + /* try to find out IOMMU group for this device */ + rte_snprintf(linkname, sizeof(linkname), + SYSFS_PCI_DEVICES "/%s/iommu_group", pci_addr); + + ret = readlink(linkname, filename, sizeof(filename)); + + /* if the link doesn't exist, no VFIO for us */ + if (ret < 0) + return 0; + + ret = rte_strsplit(filename, sizeof(filename), + tok, RTE_DIM(tok), '/'); + + if (ret <= 0) { + RTE_LOG(ERR, EAL, " %s cannot get IOMMU group\n", pci_addr); + return -1; + } + + /* IOMMU group is always the last token */ + errno = 0; + group_tok = tok[ret - 1]; + end = group_tok; + iommu_group_no = strtol(group_tok, &end, 10); + if ((end != group_tok && *end != '\0') || errno != 0) { + RTE_LOG(ERR, EAL, " %s error parsing IOMMU number!\n", pci_addr); + return -1; + } + + return iommu_group_no; +} + +static void +clear_current_group(void) +{ + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = 0; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = -1; +} + + +/* + * map the PCI resources of a PCI device in virtual memory (VFIO version). + * primary and secondary processes follow almost exactly the same path + */ +int +pci_vfio_map_resource(struct rte_pci_device *dev) +{ + struct vfio_group_status group_status = { + .argsz = sizeof(group_status) + }; + struct vfio_device_info device_info = { .argsz = sizeof(device_info) }; + int vfio_group_fd, vfio_dev_fd; + int iommu_group_no; + char pci_addr[PATH_MAX] = {0}; + struct rte_pci_addr *loc = &dev->addr; + int i, ret, msix_bar; + struct mapped_pci_resource *vfio_res = NULL; + struct pci_map *maps; + + dev->intr_handle.fd = -1; + dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN; + + /* store PCI address string */ + rte_snprintf(pci_addr, sizeof(pci_addr), PCI_PRI_FMT, + loc->domain, loc->bus, loc->devid, loc->function); + + /* get container fd (needs to be done only once per initialization) */ + if (vfio_cfg.vfio_container_fd == -1) { + int vfio_container_fd = pci_vfio_get_container_fd(); + if (vfio_container_fd < 0) { + RTE_LOG(ERR, EAL, " %s cannot open VFIO container!\n", pci_addr); + return -1; + } + + vfio_cfg.vfio_container_fd = vfio_container_fd; + } + + /* get group number */ + iommu_group_no = pci_vfio_get_group_no(pci_addr); + + /* if 0, group doesn't exist */ + if (iommu_group_no == 0) { + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + pci_addr); + return 1; + } + /* if negative, something failed */ + else if (iommu_group_no < 0) + return -1; + + /* get the actual group fd */ + vfio_group_fd = pci_vfio_get_group_fd(iommu_group_no); + if (vfio_group_fd < 0) + return -1; + + /* store group fd */ + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].group_no = iommu_group_no; + vfio_cfg.vfio_groups[vfio_cfg.vfio_group_idx].fd = vfio_group_fd; + + /* if group_fd == 0, that means the device isn't managed by VFIO */ + if (vfio_group_fd == 0) { + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + pci_addr); + /* we store 0 as group fd to distinguish between existing but + * unbound VFIO groups, and groups that don't exist at all. + */ + vfio_cfg.vfio_group_idx++; + return 1; + } + + /* + * at this point, we know at least one port on this device is bound to VFIO, + * so we can proceed to try and set this particular port up + */ + + /* check if the group is viable */ + ret = ioctl(vfio_group_fd, VFIO_GROUP_GET_STATUS, &group_status); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot get group status!\n", pci_addr); + close(vfio_group_fd); + clear_current_group(); + return -1; + } else if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + RTE_LOG(ERR, EAL, " %s VFIO group is not viable!\n", pci_addr); + close(vfio_group_fd); + clear_current_group(); + return -1; + } + + /* + * at this point, we know that this group is viable (meaning, all devices + * are either bound to VFIO or not bound to anything) + */ + + /* check if group does not have a container yet */ + if (!(group_status.flags & VFIO_GROUP_FLAGS_CONTAINER_SET)) { + + /* add group to a container */ + ret = ioctl(vfio_group_fd, VFIO_GROUP_SET_CONTAINER, + &vfio_cfg.vfio_container_fd); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot add VFIO group to container!\n", + pci_addr); + close(vfio_group_fd); + clear_current_group(); + return -1; + } + /* + * at this point we know that this group has been successfully + * initialized, so we increment vfio_group_idx to indicate that we can + * add new groups. + */ + vfio_cfg.vfio_group_idx++; + } + + /* + * set up DMA mappings for container + * + * needs to be done only once, only when at least one group is assigned to + * a container and only in primary process + */ + if (internal_config.process_type == RTE_PROC_PRIMARY && + vfio_cfg.vfio_container_has_dma == 0) { + ret = pci_vfio_setup_dma_maps(vfio_cfg.vfio_container_fd); + if (ret) { + RTE_LOG(ERR, EAL, " %s DMA remapping failed!\n", pci_addr); + return -1; + } + vfio_cfg.vfio_container_has_dma = 1; + } + + /* get a file descriptor for the device */ + vfio_dev_fd = ioctl(vfio_group_fd, VFIO_GROUP_GET_DEVICE_FD, pci_addr); + if (vfio_dev_fd < 0) { + /* if we cannot get a device fd, this simply means that this + * particular port is not bound to VFIO + */ + RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n", + pci_addr); + return 1; + } + + /* test and setup the device */ + ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_INFO, &device_info); + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot get device info!\n", pci_addr); + close(vfio_dev_fd); + return -1; + } + + /* get MSI-X BAR, if any (we have to know where it is because we can't + * mmap it when using VFIO) */ + msix_bar = -1; + ret = pci_vfio_get_msix_bar(vfio_dev_fd, &msix_bar); + if (ret < 0) { + RTE_LOG(ERR, EAL, " %s cannot get MSI-X BAR number!\n", pci_addr); + close(vfio_dev_fd); + return -1; + } + + /* if we're in a primary process, allocate vfio_res and get region info */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + vfio_res = rte_zmalloc("VFIO_RES", sizeof(*vfio_res), 0); + if (vfio_res == NULL) { + RTE_LOG(ERR, EAL, + "%s(): cannot store uio mmap details\n", __func__); + close(vfio_dev_fd); + return -1; + } + memcpy(&vfio_res->pci_addr, &dev->addr, sizeof(vfio_res->pci_addr)); + + /* get number of registers (up to BAR5) */ + vfio_res->nb_maps = RTE_MIN((int) device_info.num_regions, + VFIO_PCI_BAR5_REGION_INDEX + 1); + } + + /* map BARs */ + maps = vfio_res->maps; + + for (i = 0; i < (int) vfio_res->nb_maps; i++) { + struct vfio_region_info reg = { .argsz = sizeof(reg) }; + void *bar_addr; + + reg.index = i; + + ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_REGION_INFO, ®); + + if (ret) { + RTE_LOG(ERR, EAL, " %s cannot get device region info!\n", + pci_addr); + close(vfio_dev_fd); + if (internal_config.process_type == RTE_PROC_PRIMARY) + rte_free(vfio_res); + return -1; + } + + /* skip non-mmapable BARs */ + if ((reg.flags & VFIO_REGION_INFO_FLAG_MMAP) == 0) + continue; + + /* skip MSI-X BAR */ + if (i == msix_bar) + continue; + + bar_addr = pci_map_resource(maps[i].addr, vfio_dev_fd, reg.offset, + reg.size); + + if (bar_addr == NULL) { + RTE_LOG(ERR, EAL, " %s mapping BAR%i failed: %s\n", pci_addr, i, + strerror(errno)); + close(vfio_dev_fd); + if (internal_config.process_type == RTE_PROC_PRIMARY) + rte_free(vfio_res); + return -1; + } + + maps[i].addr = bar_addr; + maps[i].offset = reg.offset; + maps[i].size = reg.size; + dev->mem_resource[i].addr = bar_addr; + } + + /* if secondary process, do not set up interrupts */ + if (internal_config.process_type == RTE_PROC_PRIMARY) { + if (pci_vfio_setup_interrupts(dev, vfio_dev_fd) != 0) { + RTE_LOG(ERR, EAL, " %s error setting up interrupts!\n", pci_addr); + close(vfio_dev_fd); + rte_free(vfio_res); + return -1; + } + + /* set bus mastering for the device */ + if (pci_vfio_set_bus_master(vfio_dev_fd)) { + RTE_LOG(ERR, EAL, " %s cannot set up bus mastering!\n", pci_addr); + close(vfio_dev_fd); + rte_free(vfio_res); + return -1; + } + + /* Reset the device */ + ioctl(vfio_dev_fd, VFIO_DEVICE_RESET); + } + + if (internal_config.process_type == RTE_PROC_PRIMARY) + TAILQ_INSERT_TAIL(pci_res_list, vfio_res, next); + + return 0; +} + +int +pci_vfio_enable(void) +{ + /* initialize group list */ + int i; + + for (i = 0; i < VFIO_MAX_GROUPS; i++) { + vfio_cfg.vfio_groups[i].fd = -1; + vfio_cfg.vfio_groups[i].group_no = -1; + } + vfio_cfg.vfio_container_fd = -1; + + /* check if we have VFIO driver enabled */ + if (access(VFIO_DIR, F_OK) == 0) + vfio_cfg.vfio_enabled = 1; + else + RTE_LOG(INFO, EAL, "VFIO driver not loaded or wrong permissions\n"); + + return 0; +} + +int +pci_vfio_is_enabled(void) +{ + return vfio_cfg.vfio_enabled; +} +#endif diff --git a/lib/librte_eal/linuxapp/eal/include/eal_internal_cfg.h b/lib/librte_eal/linuxapp/eal/include/eal_internal_cfg.h index dd17df28f3..498ade29fe 100644 --- a/lib/librte_eal/linuxapp/eal/include/eal_internal_cfg.h +++ b/lib/librte_eal/linuxapp/eal/include/eal_internal_cfg.h @@ -40,6 +40,7 @@ #define _EAL_LINUXAPP_INTERNAL_CFG #include +#include #define MAX_HUGEPAGE_SIZES 3 /**< support up to 3 page sizes */ @@ -76,6 +77,8 @@ struct internal_config { volatile uint64_t socket_mem[RTE_MAX_NUMA_NODES]; /**< amount of memory per socket */ uintptr_t base_virtaddr; /**< base address to try and reserve memory from */ volatile int syslog_facility; /**< facility passed to openlog() */ + /** default interrupt mode for VFIO */ + volatile enum rte_intr_mode vfio_intr_mode; const char *hugefile_prefix; /**< the base filename of hugetlbfs files */ const char *hugepage_dir; /**< specific hugetlbfs directory to use */ diff --git a/lib/librte_eal/linuxapp/eal/include/eal_pci_init.h b/lib/librte_eal/linuxapp/eal/include/eal_pci_init.h index 87bdfe724d..59a7e79409 100644 --- a/lib/librte_eal/linuxapp/eal/include/eal_pci_init.h +++ b/lib/librte_eal/linuxapp/eal/include/eal_pci_init.h @@ -34,6 +34,8 @@ #ifndef EAL_PCI_INIT_H_ #define EAL_PCI_INIT_H_ +#include "eal_vfio.h" + struct pci_map { void *addr; uint64_t offset; @@ -63,4 +65,33 @@ void *pci_map_resource(void *requested_addr, int fd, off_t offset, /* map IGB_UIO resource prototype */ int pci_uio_map_resource(struct rte_pci_device *dev); +#ifdef VFIO_PRESENT + +#define VFIO_MAX_GROUPS 64 + +int pci_vfio_enable(void); +int pci_vfio_is_enabled(void); + +/* map VFIO resource prototype */ +int pci_vfio_map_resource(struct rte_pci_device *dev); + +/* + * we don't need to store device fd's anywhere since they can be obtained from + * the group fd via an ioctl() call. + */ +struct vfio_group { + int group_no; + int fd; +}; + +struct vfio_config { + int vfio_enabled; + int vfio_container_fd; + int vfio_container_has_dma; + int vfio_group_idx; + struct vfio_group vfio_groups[VFIO_MAX_GROUPS]; +}; + +#endif + #endif /* EAL_PCI_INIT_H_ */ diff --git a/lib/librte_eal/linuxapp/eal/include/eal_vfio.h b/lib/librte_eal/linuxapp/eal/include/eal_vfio.h index 354e9ca874..03e693e01b 100644 --- a/lib/librte_eal/linuxapp/eal/include/eal_vfio.h +++ b/lib/librte_eal/linuxapp/eal/include/eal_vfio.h @@ -42,6 +42,12 @@ #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0) #include +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 10, 0) +#define RTE_PCI_MSIX_TABLE_BIR 0x7 +#else +#define RTE_PCI_MSIX_TABLE_BIR PCI_MSIX_TABLE_BIR +#endif + #define VFIO_PRESENT #endif /* kernel version */ #endif /* RTE_EAL_VFIO */