From: Liron Himi <lironh@marvell.com>
Date: Tue, 26 Mar 2019 18:40:10 +0000 (+0200)
Subject: kni: calculate MTU from mbuf size
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=ff1e35fb5f8330f89d13f58c9fb767b5bd188940;p=dpdk.git

kni: calculate MTU from mbuf size

- mbuf_size and mtu are now being calculated according
to the given mb-pool.

- max_mtu is now being set according to the given mtu

the above two changes provide the ability to work with jumbo frames

Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
---

diff --git a/doc/guides/nics/kni.rst b/doc/guides/nics/kni.rst
index 204fbd563a..a66c59531e 100644
--- a/doc/guides/nics/kni.rst
+++ b/doc/guides/nics/kni.rst
@@ -55,7 +55,8 @@ configuration:
 
         Interface name: kni#
         force bind kernel thread to a core : NO
-        mbuf size: MAX_PACKET_SZ
+        mbuf size: (rte_pktmbuf_data_room_size(pktmbuf_pool) - RTE_PKTMBUF_HEADROOM)
+        mtu: (conf.mbuf_size - ETHER_HDR_LEN)
 
 KNI control path is not supported with the PMD, since there is no physical
 backend device by default.
diff --git a/doc/guides/prog_guide/kernel_nic_interface.rst b/doc/guides/prog_guide/kernel_nic_interface.rst
index 33ea980e55..7fcbd936f9 100644
--- a/doc/guides/prog_guide/kernel_nic_interface.rst
+++ b/doc/guides/prog_guide/kernel_nic_interface.rst
@@ -187,6 +187,8 @@ The ``struct rte_kni_conf`` structure contains fields which allow the
 user to specify the interface name, set the MTU size, set an explicit or
 random MAC address and control the affinity of the kernel Rx thread(s)
 (both single and multi-threaded modes).
+By default the KNI sample example gets the MTU from the matching device,
+and in case of KNI PMD it is derived from mbuf buffer length.
 
 The ``struct rte_kni_ops`` structure contains pointers to functions to
 handle requests from the ``rte_kni`` kernel module.  These functions
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index aae8ff6029..4e991180ed 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -54,6 +54,15 @@ New Features
      Also, make sure to start the actual text at the margin.
      =========================================================
 
+* **Updated KNI module and PMD.**
+
+  Updated the KNI kernel module to set the max_mtu according to the given
+  initial MTU size. Without it, the maximum MTU was 1500.
+
+  Updated the KNI PMD driver to set the mbuf_size and MTU based on
+  the given mb-pool. This provide the ability to pass jumbo frames
+  if the mb-pool contains suitable buffers' size.
+
 * **Updated Solarflare network PMD.**
 
   Updated the sfc_efx driver including the following changes:
diff --git a/drivers/net/kni/rte_eth_kni.c b/drivers/net/kni/rte_eth_kni.c
index a1e9970dfa..5e02224236 100644
--- a/drivers/net/kni/rte_eth_kni.c
+++ b/drivers/net/kni/rte_eth_kni.c
@@ -16,9 +16,11 @@
 /* Only single queue supported */
 #define KNI_MAX_QUEUE_PER_PORT 1
 
-#define MAX_PACKET_SZ 2048
 #define MAX_KNI_PORTS 8
 
+#define KNI_ETHER_MTU(mbuf_size)       \
+	((mbuf_size) - ETHER_HDR_LEN) /**< Ethernet MTU. */
+
 #define ETH_KNI_NO_REQUEST_THREAD_ARG	"no_request_thread"
 static const char * const valid_arguments[] = {
 	ETH_KNI_NO_REQUEST_THREAD_ARG,
@@ -123,11 +125,13 @@ eth_kni_start(struct rte_eth_dev *dev)
 	struct rte_kni_conf conf;
 	const char *name = dev->device->name + 4; /* remove net_ */
 
+	mb_pool = internals->rx_queues[0].mb_pool;
 	snprintf(conf.name, RTE_KNI_NAMESIZE, "%s", name);
 	conf.force_bind = 0;
 	conf.group_id = port_id;
-	conf.mbuf_size = MAX_PACKET_SZ;
-	mb_pool = internals->rx_queues[0].mb_pool;
+	conf.mbuf_size =
+		rte_pktmbuf_data_room_size(mb_pool) - RTE_PKTMBUF_HEADROOM;
+	conf.mtu = KNI_ETHER_MTU(conf.mbuf_size);
 
 	internals->kni = rte_kni_alloc(mb_pool, &conf, NULL);
 	if (internals->kni == NULL) {
diff --git a/kernel/linux/kni/compat.h b/kernel/linux/kni/compat.h
index 3c575c70a2..562d8bf94a 100644
--- a/kernel/linux/kni/compat.h
+++ b/kernel/linux/kni/compat.h
@@ -114,6 +114,10 @@
 #define ndo_change_mtu ndo_change_mtu_rh74
 #endif
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0)
+#define HAVE_MAX_MTU_PARAM
+#endif
+
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
 #define HAVE_SIGNAL_FUNCTIONS_OWN_HEADER
 #endif
diff --git a/kernel/linux/kni/kni_misc.c b/kernel/linux/kni/kni_misc.c
index 522ae23b95..04c78eb874 100644
--- a/kernel/linux/kni/kni_misc.c
+++ b/kernel/linux/kni/kni_misc.c
@@ -459,6 +459,9 @@ kni_ioctl_create(struct net *net, uint32_t ioctl_num,
 
 	if (dev_info.mtu)
 		net_dev->mtu = dev_info.mtu;
+#ifdef HAVE_MAX_MTU_PARAM
+	net_dev->max_mtu = net_dev->mtu;
+#endif
 
 	ret = register_netdev(net_dev);
 	if (ret) {