From 0b3456e391a6518e26c60ab2aa6546964d46a6f6 Mon Sep 17 00:00:00 2001 From: =?utf8?q?N=C3=A9lio=20Laranjeiro?= Date: Mon, 5 Mar 2018 13:21:02 +0100 Subject: [PATCH] net/mlx5: remove useless empty lines Some empty lines have been added in the middle of the code without any reason. This commit removes them. Signed-off-by: Nelio Laranjeiro Acked-by: Adrien Mazarguil --- drivers/net/mlx5/mlx5.c | 22 ---------------------- drivers/net/mlx5/mlx5_ethdev.c | 7 ------- drivers/net/mlx5/mlx5_mr.c | 1 - drivers/net/mlx5/mlx5_rss.c | 2 -- drivers/net/mlx5/mlx5_rxq.c | 1 - drivers/net/mlx5/mlx5_vlan.c | 6 ------ 6 files changed, 39 deletions(-) diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 5aaf568e59..cf0967a1d0 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -597,7 +597,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, return -ENOMEM; } DEBUG("using driver device index %d", idx); - /* Save PCI address. */ mlx5_dev[idx].pci_addr = pci_dev->addr; list = mlx5_glue->get_device_list(&i); @@ -644,7 +643,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, return -err; } ibv_dev = list[i]; - DEBUG("device opened"); /* * Multi-packet send is supported by ConnectX-4 Lx PF as well @@ -685,7 +683,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr)) goto error; INFO("%u port(s) detected", device_attr.orig_attr.phys_port_cnt); - for (i = 0; i < device_attr.orig_attr.phys_port_cnt; i++) { char name[RTE_ETH_NAME_MAX_LEN]; int len; @@ -716,9 +713,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, pci_dev->addr.devid, pci_dev->addr.function); if (device_attr.orig_attr.phys_port_cnt > 1) snprintf(name + len, sizeof(name), " port %u", i); - mlx5_dev[idx].ports |= test; - if (rte_eal_process_type() == RTE_PROC_SECONDARY) { eth_dev = rte_eth_dev_attach_secondary(name); if (eth_dev == NULL) { @@ -755,15 +750,12 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, priv_select_tx_function(priv, eth_dev); continue; } - DEBUG("using port %u (%08" PRIx32 ")", port, test); - ctx = mlx5_glue->open_device(ibv_dev); if (ctx == NULL) { err = ENODEV; goto port_error; } - mlx5_glue->query_device_ex(ctx, NULL, &device_attr); /* Check port status. */ err = mlx5_glue->query_port(ctx, port, &port_attr); @@ -771,19 +763,16 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, ERROR("port query failed: %s", strerror(err)); goto port_error; } - if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) { ERROR("port %d is not configured in Ethernet mode", port); err = EINVAL; goto port_error; } - if (port_attr.state != IBV_PORT_ACTIVE) DEBUG("port %d is not active: \"%s\" (%d)", port, mlx5_glue->port_state_str(port_attr.state), port_attr.state); - /* Allocate protection domain. */ pd = mlx5_glue->alloc_pd(ctx); if (pd == NULL) { @@ -791,9 +780,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, err = ENOMEM; goto port_error; } - mlx5_dev[idx].ports |= test; - /* from rte_ethdev.c */ priv = rte_zmalloc("ethdev private structure", sizeof(*priv), @@ -803,7 +790,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, err = ENOMEM; goto port_error; } - priv->ctx = ctx; strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path, sizeof(priv->ibdev_path)); @@ -821,7 +807,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, ERROR("ibv_query_device_ex() failed"); goto port_error; } - config.hw_csum = !!(device_attr_ex.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM); DEBUG("checksum offloading is %ssupported", @@ -857,7 +842,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, #endif DEBUG("hardware RX end alignment padding is %ssupported", (config.hw_padding ? "" : "not ")); - config.tso = ((device_attr_ex.tso_caps.max_tso > 0) && (device_attr_ex.tso_caps.supported_qpts & (1 << IBV_QPT_RAW_PACKET))); @@ -906,7 +890,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, /* Get actual MTU if possible. */ priv_get_mtu(priv, &priv->mtu); DEBUG("port %u MTU is %u", priv->port, priv->mtu); - eth_dev = rte_eth_dev_allocate(name); if (eth_dev == NULL) { ERROR("can not allocate rte ethdev"); @@ -929,7 +912,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0)); TAILQ_INIT(&priv->flows); TAILQ_INIT(&priv->ctrl_flows); - /* Hint libmlx5 to use PMD allocator for data plane resources */ struct mlx5dv_ctx_allocators alctr = { .alloc = &mlx5_alloc_verbs_buf, @@ -946,7 +928,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, /* Store device configuration on private structure. */ priv->config = config; continue; - port_error: if (priv) rte_free(priv); @@ -956,20 +937,17 @@ port_error: claim_zero(mlx5_glue->close_device(ctx)); break; } - /* * XXX if something went wrong in the loop above, there is a resource * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as * long as the dpdk does not provide a way to deallocate a ethdev and a * way to enumerate the registered ethdevs to free the previous ones. */ - /* no port found, complain */ if (!mlx5_dev[idx].ports) { err = ENODEV; goto error; } - error: if (attr_ctx) claim_zero(mlx5_glue->close_device(attr_ctx)); diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c index 9bbf1eb7d0..5c43755d05 100644 --- a/drivers/net/mlx5/mlx5_ethdev.c +++ b/drivers/net/mlx5/mlx5_ethdev.c @@ -403,7 +403,6 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) char ifname[IF_NAMESIZE]; info->pci_dev = RTE_ETH_DEV_TO_PCI(dev); - priv_lock(priv); /* FIXME: we should ask the device for these values. */ info->min_rx_bufsize = 32; @@ -492,7 +491,6 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev) int link_speed = 0; /* priv_lock() is not taken to allow concurrent calls. */ - if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) { WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno)); return -1; @@ -838,7 +836,6 @@ mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) strerror(ret)); goto out; } - fc_conf->autoneg = ethpause.autoneg; if (ethpause.rx_pause && ethpause.tx_pause) fc_conf->mode = RTE_FC_FULL; @@ -849,7 +846,6 @@ mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) else fc_conf->mode = RTE_FC_NONE; ret = 0; - out: priv_unlock(priv); assert(ret >= 0); @@ -890,7 +886,6 @@ mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) ethpause.tx_pause = 1; else ethpause.tx_pause = 0; - priv_lock(priv); if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) { ret = errno; @@ -900,7 +895,6 @@ mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) goto out; } ret = 0; - out: priv_unlock(priv); assert(ret >= 0); @@ -1155,7 +1149,6 @@ priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev) rte_intr_callback_register(&priv->intr_handle, mlx5_dev_interrupt_handler, dev); } - rc = priv_socket_init(priv); if (!rc && priv->primary_socket) { priv->intr_handle_socket.fd = priv->primary_socket; diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c index 8748ddcf5c..6624d0ffa6 100644 --- a/drivers/net/mlx5/mlx5_mr.c +++ b/drivers/net/mlx5/mlx5_mr.c @@ -76,7 +76,6 @@ mlx5_check_mempool(struct rte_mempool *mp, uintptr_t *start, rte_mempool_mem_iter(mp, mlx5_check_mempool_cb, &data); *start = (uintptr_t)data.start; *end = (uintptr_t)data.end; - return data.ret; } diff --git a/drivers/net/mlx5/mlx5_rss.c b/drivers/net/mlx5/mlx5_rss.c index d06b0bee17..8f5c8beff2 100644 --- a/drivers/net/mlx5/mlx5_rss.c +++ b/drivers/net/mlx5/mlx5_rss.c @@ -123,7 +123,6 @@ priv_rss_reta_index_resize(struct priv *priv, unsigned int reta_size) return ENOMEM; priv->reta_idx = mem; priv->reta_idx_n = reta_size; - if (old_size < reta_size) memset(&(*priv->reta_idx)[old_size], 0, (reta_size - old_size) * @@ -191,7 +190,6 @@ priv_dev_rss_reta_update(struct priv *priv, ret = priv_rss_reta_index_resize(priv, reta_size); if (ret) return ret; - for (idx = 0, i = 0; (i != reta_size); ++i) { idx = i / RTE_RETA_GROUP_SIZE; pos = i % RTE_RETA_GROUP_SIZE; diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c index 6924202cc8..320a12be9f 100644 --- a/drivers/net/mlx5/mlx5_rxq.c +++ b/drivers/net/mlx5/mlx5_rxq.c @@ -1067,7 +1067,6 @@ mlx5_priv_rxq_get(struct priv *priv, uint16_t idx) rxq_ctrl = container_of((*priv->rxqs)[idx], struct mlx5_rxq_ctrl, rxq); - mlx5_priv_rxq_ibv_get(priv, idx); rte_atomic32_inc(&rxq_ctrl->refcnt); DEBUG("%p: Rx queue %p: refcnt %d", (void *)priv, diff --git a/drivers/net/mlx5/mlx5_vlan.c b/drivers/net/mlx5/mlx5_vlan.c index 75c3456265..85ed546cbd 100644 --- a/drivers/net/mlx5/mlx5_vlan.c +++ b/drivers/net/mlx5/mlx5_vlan.c @@ -120,14 +120,12 @@ priv_vlan_strip_queue_set(struct priv *priv, uint16_t idx, int on) .flags_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING, .flags = vlan_offloads, }; - err = mlx5_glue->modify_wq(rxq_ctrl->ibv->wq, &mod); if (err) { ERROR("%p: failed to modified stripping mode: %s", (void *)priv, strerror(err)); return; } - /* Update related bits in RX queue. */ rxq->vlan_strip = !!on; } @@ -152,13 +150,11 @@ mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on) ERROR("VLAN stripping is not supported"); return; } - /* Validate queue number */ if (queue >= priv->rxqs_n) { ERROR("VLAN stripping, invalid queue number %d", queue); return; } - priv_lock(priv); priv_vlan_strip_queue_set(priv, queue, on); priv_unlock(priv); @@ -186,13 +182,11 @@ mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask) ERROR("VLAN stripping is not supported"); return 0; } - /* Run on every RX queue and set/reset VLAN stripping. */ priv_lock(priv); for (i = 0; (i != priv->rxqs_n); i++) priv_vlan_strip_queue_set(priv, i, hw_vlan_strip); priv_unlock(priv); } - return 0; } -- 2.20.1