From 0db52e6694bfcf2f0c1437ebdcb97b34864efba0 Mon Sep 17 00:00:00 2001 From: Shahaf Shuler Date: Sat, 29 Jul 2017 19:17:30 +0300 Subject: [PATCH] doc: move kernel drivers to a new chapter The UIO and VFIO sections should not be part of the "Compiling the DPDK Target from Source" chapter, as it is PMD specific and not true for all PMDs. Instead, moving those sections to a new chapter which include all kernel drivers being used along with the different PMDs. Signed-off-by: Shahaf Shuler Acked-by: John McNamara --- doc/guides/linux_gsg/build_dpdk.rst | 135 ------------ doc/guides/linux_gsg/index.rst | 1 + doc/guides/linux_gsg/linux_drivers.rst | 197 ++++++++++++++++++ .../linux_gsg/nic_perf_intel_platform.rst | 18 +- 4 files changed, 200 insertions(+), 151 deletions(-) create mode 100644 doc/guides/linux_gsg/linux_drivers.rst diff --git a/doc/guides/linux_gsg/build_dpdk.rst b/doc/guides/linux_gsg/build_dpdk.rst index cf6c06d646..e32afd5f8a 100644 --- a/doc/guides/linux_gsg/build_dpdk.rst +++ b/doc/guides/linux_gsg/build_dpdk.rst @@ -143,138 +143,3 @@ Browsing the Installed DPDK Environment Target Once a target is created it contains all libraries, including poll-mode drivers, and header files for the DPDK environment that are required to build customer applications. In addition, the test and testpmd applications are built under the build/app directory, which may be used for testing. A kmod directory is also present that contains kernel modules which may be loaded if needed. - -Loading Modules to Enable Userspace IO for DPDK ------------------------------------------------ - -To run any DPDK application, a suitable uio module can be loaded into the running kernel. -In many cases, the standard ``uio_pci_generic`` module included in the Linux kernel -can provide the uio capability. This module can be loaded using the command - -.. code-block:: console - - sudo modprobe uio_pci_generic - -.. note:: - - ``uio_pci_generic`` module doesn't support the creation of virtual functions. - -As an alternative to the ``uio_pci_generic``, the DPDK also includes the igb_uio -module which can be found in the kmod subdirectory referred to above. It can -be loaded as shown below: - -.. code-block:: console - - sudo modprobe uio - sudo insmod kmod/igb_uio.ko - -.. note:: - - For some devices which lack support for legacy interrupts, e.g. virtual function - (VF) devices, the ``igb_uio`` module may be needed in place of ``uio_pci_generic``. - -Since DPDK release 1.7 onward provides VFIO support, use of UIO is optional -for platforms that support using VFIO. - -Loading VFIO Module -------------------- - -To run an DPDK application and make use of VFIO, the ``vfio-pci`` module must be loaded: - -.. code-block:: console - - sudo modprobe vfio-pci - -Note that in order to use VFIO, your kernel must support it. -VFIO kernel modules have been included in the Linux kernel since version 3.6.0 and are usually present by default, -however please consult your distributions documentation to make sure that is the case. - -Also, to use VFIO, both kernel and BIOS must support and be configured to use IO virtualization (such as Intel® VT-d). - -.. note:: - - ``vfio-pci`` module doesn't support the creation of virtual functions. - -For proper operation of VFIO when running DPDK applications as a non-privileged user, correct permissions should also be set up. -This can be done by using the DPDK setup script (called dpdk-setup.sh and located in the usertools directory). - -.. _linux_gsg_binding_kernel: - -Binding and Unbinding Network Ports to/from the Kernel Modules --------------------------------------------------------------- - -As of release 1.4, DPDK applications no longer automatically unbind all supported network ports from the kernel driver in use. -Instead, all ports that are to be used by an DPDK application must be bound to the -``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module before the application is run. -Any network ports under Linux* control will be ignored by the DPDK poll-mode drivers and cannot be used by the application. - -.. warning:: - - The DPDK will, by default, no longer automatically unbind network ports from the kernel driver at startup. - Any ports to be used by an DPDK application must be unbound from Linux* control and - bound to the ``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module before the application is run. - -To bind ports to the ``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module for DPDK use, -and then subsequently return ports to Linux* control, -a utility script called dpdk-devbind.py is provided in the usertools subdirectory. -This utility can be used to provide a view of the current state of the network ports on the system, -and to bind and unbind those ports from the different kernel modules, including the uio and vfio modules. -The following are some examples of how the script can be used. -A full description of the script and its parameters can be obtained by calling the script with the ``--help`` or ``--usage`` options. -Note that the uio or vfio kernel modules to be used, should be loaded into the kernel before -running the ``dpdk-devbind.py`` script. - -.. warning:: - - Due to the way VFIO works, there are certain limitations to which devices can be used with VFIO. - Mainly it comes down to how IOMMU groups work. - Any Virtual Function device can be used with VFIO on its own, but physical devices will require either all ports bound to VFIO, - or some of them bound to VFIO while others not being bound to anything at all. - - If your device is behind a PCI-to-PCI bridge, the bridge will then be part of the IOMMU group in which your device is in. - Therefore, the bridge driver should also be unbound from the bridge PCI device for VFIO to work with devices behind the bridge. - -.. warning:: - - While any user can run the dpdk-devbind.py script to view the status of the network ports, - binding or unbinding network ports requires root privileges. - -To see the status of all network ports on the system: - -.. code-block:: console - - ./usertools/dpdk-devbind.py --status - - Network devices using DPDK-compatible driver - ============================================ - 0000:82:00.0 '82599EB 10-GbE NIC' drv=uio_pci_generic unused=ixgbe - 0000:82:00.1 '82599EB 10-GbE NIC' drv=uio_pci_generic unused=ixgbe - - Network devices using kernel driver - =================================== - 0000:04:00.0 'I350 1-GbE NIC' if=em0 drv=igb unused=uio_pci_generic *Active* - 0000:04:00.1 'I350 1-GbE NIC' if=eth1 drv=igb unused=uio_pci_generic - 0000:04:00.2 'I350 1-GbE NIC' if=eth2 drv=igb unused=uio_pci_generic - 0000:04:00.3 'I350 1-GbE NIC' if=eth3 drv=igb unused=uio_pci_generic - - Other network devices - ===================== - - -To bind device ``eth1``,``04:00.1``, to the ``uio_pci_generic`` driver: - -.. code-block:: console - - ./usertools/dpdk-devbind.py --bind=uio_pci_generic 04:00.1 - -or, alternatively, - -.. code-block:: console - - ./usertools/dpdk-devbind.py --bind=uio_pci_generic eth1 - -To restore device ``82:00.0`` to its original kernel binding: - -.. code-block:: console - - ./usertools/dpdk-devbind.py --bind=ixgbe 82:00.0 diff --git a/doc/guides/linux_gsg/index.rst b/doc/guides/linux_gsg/index.rst index 3d3ada15ec..799559c22c 100644 --- a/doc/guides/linux_gsg/index.rst +++ b/doc/guides/linux_gsg/index.rst @@ -40,6 +40,7 @@ Getting Started Guide for Linux intro sys_reqs build_dpdk + linux_drivers build_sample_apps enable_func quick_start diff --git a/doc/guides/linux_gsg/linux_drivers.rst b/doc/guides/linux_gsg/linux_drivers.rst new file mode 100644 index 0000000000..b3525c0b29 --- /dev/null +++ b/doc/guides/linux_gsg/linux_drivers.rst @@ -0,0 +1,197 @@ +.. BSD LICENSE + Copyright(c) 2010-2015 Intel Corporation. + Copyright(c) 2017 Mellanox Corporation. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.. _linux_gsg_linux_drivers: + +Linux Drivers +============= + +Different PMDs may require different kernel drivers in order to work properly. +Depends on the PMD being used, a corresponding kernel driver should be load +and bind to the network ports. + +UIO +--- + +A small kernel module to set up the device, map device memory to user-space and register interrupts. +In many cases, the standard ``uio_pci_generic`` module included in the Linux kernel +can provide the uio capability. This module can be loaded using the command: + +.. code-block:: console + + sudo modprobe uio_pci_generic + +.. note:: + + ``uio_pci_generic`` module doesn't support the creation of virtual functions. + +As an alternative to the ``uio_pci_generic``, the DPDK also includes the igb_uio +module which can be found in the kmod subdirectory referred to above. It can +be loaded as shown below: + +.. code-block:: console + + sudo modprobe uio + sudo insmod kmod/igb_uio.ko + +.. note:: + + For some devices which lack support for legacy interrupts, e.g. virtual function + (VF) devices, the ``igb_uio`` module may be needed in place of ``uio_pci_generic``. + +Since DPDK release 1.7 onward provides VFIO support, use of UIO is optional +for platforms that support using VFIO. + +VFIO +---- + +A more robust and secure driver in compare to the ``UIO``, relying on IOMMU protection. +To make use of VFIO, the ``vfio-pci`` module must be loaded: + +.. code-block:: console + + sudo modprobe vfio-pci + +Note that in order to use VFIO, your kernel must support it. +VFIO kernel modules have been included in the Linux kernel since version 3.6.0 and are usually present by default, +however please consult your distributions documentation to make sure that is the case. + +Also, to use VFIO, both kernel and BIOS must support and be configured to use IO virtualization (such as Intel® VT-d). + +.. note:: + + ``vfio-pci`` module doesn't support the creation of virtual functions. + +For proper operation of VFIO when running DPDK applications as a non-privileged user, correct permissions should also be set up. +This can be done by using the DPDK setup script (called dpdk-setup.sh and located in the usertools directory). + +.. note:: + + VFIO can be used without IOMMU. While this is just as unsafe as using UIO, it does make it possible for the user to keep the degree of device access and programming that VFIO has, in situations where IOMMU is not available. + +Bifurcated Driver +----------------- + +PMDs which use the bifurcated driver co-exists with the device kernel driver. +On such model the NIC is controlled by the kernel, while the data +path is performed by the PMD directly on top of the device. + +Such model has the following benefits: + + - It is secure and robust, as the memory management and isolation + is done by the kernel. + - It enables the user to use legacy linux tools such as ``ethtool`` or + ``ifconfig`` while running DPDK application on the same network ports. + - It enables the DPDK application to filter only part of the traffic, + While the rest will be directed and handled by the kernel driver. + +More about the bifurcated driver can be found in +`Mellanox Bifurcated DPDK PMD +`__. + +.. _linux_gsg_binding_kernel: + +Binding and Unbinding Network Ports to/from the Kernel Modules +-------------------------------------------------------------- + +.. note:: + + PMDs Which use the bifurcated driver should not be unbind from their kernel drivers. this section is for PMDs which use the UIO or VFIO drivers. + +As of release 1.4, DPDK applications no longer automatically unbind all supported network ports from the kernel driver in use. +Instead, in case the PMD being used use the UIO or VFIO drivers, all ports that are to be used by an DPDK application must be bound to the +``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module before the application is run. +For such PMDs, any network ports under Linux* control will be ignored and cannot be used by the application. + +To bind ports to the ``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module for DPDK use, +and then subsequently return ports to Linux* control, +a utility script called dpdk-devbind.py is provided in the usertools subdirectory. +This utility can be used to provide a view of the current state of the network ports on the system, +and to bind and unbind those ports from the different kernel modules, including the uio and vfio modules. +The following are some examples of how the script can be used. +A full description of the script and its parameters can be obtained by calling the script with the ``--help`` or ``--usage`` options. +Note that the uio or vfio kernel modules to be used, should be loaded into the kernel before +running the ``dpdk-devbind.py`` script. + +.. warning:: + + Due to the way VFIO works, there are certain limitations to which devices can be used with VFIO. + Mainly it comes down to how IOMMU groups work. + Any Virtual Function device can be used with VFIO on its own, but physical devices will require either all ports bound to VFIO, + or some of them bound to VFIO while others not being bound to anything at all. + + If your device is behind a PCI-to-PCI bridge, the bridge will then be part of the IOMMU group in which your device is in. + Therefore, the bridge driver should also be unbound from the bridge PCI device for VFIO to work with devices behind the bridge. + +.. warning:: + + While any user can run the dpdk-devbind.py script to view the status of the network ports, + binding or unbinding network ports requires root privileges. + +To see the status of all network ports on the system: + +.. code-block:: console + + ./usertools/dpdk-devbind.py --status + + Network devices using DPDK-compatible driver + ============================================ + 0000:82:00.0 '82599EB 10-GbE NIC' drv=uio_pci_generic unused=ixgbe + 0000:82:00.1 '82599EB 10-GbE NIC' drv=uio_pci_generic unused=ixgbe + + Network devices using kernel driver + =================================== + 0000:04:00.0 'I350 1-GbE NIC' if=em0 drv=igb unused=uio_pci_generic *Active* + 0000:04:00.1 'I350 1-GbE NIC' if=eth1 drv=igb unused=uio_pci_generic + 0000:04:00.2 'I350 1-GbE NIC' if=eth2 drv=igb unused=uio_pci_generic + 0000:04:00.3 'I350 1-GbE NIC' if=eth3 drv=igb unused=uio_pci_generic + + Other network devices + ===================== + + +To bind device ``eth1``,``04:00.1``, to the ``uio_pci_generic`` driver: + +.. code-block:: console + + ./usertools/dpdk-devbind.py --bind=uio_pci_generic 04:00.1 + +or, alternatively, + +.. code-block:: console + + ./usertools/dpdk-devbind.py --bind=uio_pci_generic eth1 + +To restore device ``82:00.0`` to its original kernel binding: + +.. code-block:: console + + ./usertools/dpdk-devbind.py --bind=ixgbe 82:00.0 diff --git a/doc/guides/linux_gsg/nic_perf_intel_platform.rst b/doc/guides/linux_gsg/nic_perf_intel_platform.rst index 709113dcb0..2653c5de66 100644 --- a/doc/guides/linux_gsg/nic_perf_intel_platform.rst +++ b/doc/guides/linux_gsg/nic_perf_intel_platform.rst @@ -186,22 +186,8 @@ Configurations before running DPDK **Note**: To get the best performance, ensure that the core and NICs are in the same socket. In the example above ``85:00.0`` is on socket 1 and should be used by cores on socket 1 for the best performance. -4. Bind the test ports to DPDK compatible drivers, such as igb_uio. For example bind two ports to a DPDK compatible driver and check the status: - - .. code-block:: console - - - # Bind ports 82:00.0 and 85:00.0 to dpdk driver - ./dpdk_folder/usertools/dpdk-devbind.py -b igb_uio 82:00.0 85:00.0 - - # Check the port driver status - ./dpdk_folder/usertools/dpdk-devbind.py --status - - See ``dpdk-devbind.py --help`` for more details. - - -More details about DPDK setup and Linux kernel requirements see :ref:`linux_gsg_compiling_dpdk`. - +4. Check which kernel drivers needs to be loaded and whether there is a need to unbind the network ports from their kernel drivers. +More details about DPDK setup and Linux kernel requirements see :ref:`linux_gsg_compiling_dpdk` and :ref:`linux_gsg_linux_drivers`. Example of getting best performance for an Intel NIC ---------------------------------------------------- -- 2.20.1