From 191447ce23765dc22a21b5cfe02c7d1a7a776258 Mon Sep 17 00:00:00 2001 From: Shijith Thotton Date: Sat, 25 Mar 2017 11:54:31 +0530 Subject: [PATCH] net/liquidio: add API to setup Rx queue Signed-off-by: Shijith Thotton Signed-off-by: Jerin Jacob Signed-off-by: Derek Chickles Signed-off-by: Venkat Koppula Signed-off-by: Srisivasubramanian S Signed-off-by: Mallesham Jatharakonda --- drivers/net/liquidio/base/lio_hw_defs.h | 3 + drivers/net/liquidio/lio_ethdev.c | 67 ++++++++++ drivers/net/liquidio/lio_rxtx.c | 168 ++++++++++++++++++++++++ drivers/net/liquidio/lio_rxtx.h | 56 ++++++++ drivers/net/liquidio/lio_struct.h | 149 +++++++++++++++++++++ 5 files changed, 443 insertions(+) diff --git a/drivers/net/liquidio/base/lio_hw_defs.h b/drivers/net/liquidio/base/lio_hw_defs.h index 3201dc536d..35d59fdcc9 100644 --- a/drivers/net/liquidio/base/lio_hw_defs.h +++ b/drivers/net/liquidio/base/lio_hw_defs.h @@ -78,6 +78,8 @@ enum lio_card_type { #define LIO_DEV_RUNNING 0xc +#define LIO_OQ_REFILL_THRESHOLD_CFG(cfg) \ + ((cfg)->default_config->oq.refill_threshold) #define LIO_NUM_DEF_TX_DESCS_CFG(cfg) \ ((cfg)->default_config->num_def_tx_descs) @@ -89,6 +91,7 @@ enum lio_card_type { #define LIO_MAX_INSTR_QUEUES(lio_dev) CN23XX_MAX_RINGS_PER_VF #define LIO_MAX_POSSIBLE_INSTR_QUEUES CN23XX_MAX_INPUT_QUEUES +#define LIO_MAX_POSSIBLE_OUTPUT_QUEUES CN23XX_MAX_OUTPUT_QUEUES #define LIO_DEVICE_NAME_LEN 32 #define LIO_BASE_MAJOR_VERSION 1 diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c index 194b0964eb..a93fa4a4e7 100644 --- a/drivers/net/liquidio/lio_ethdev.c +++ b/drivers/net/liquidio/lio_ethdev.c @@ -55,6 +55,72 @@ lio_hweight64(uint64_t w) return (res + (res >> 32)) & 0x00000000000000FFul; } +/** + * Setup our receive queue/ringbuffer. This is the + * queue the Octeon uses to send us packets and + * responses. We are given a memory pool for our + * packet buffers that are used to populate the receive + * queue. + * + * @param eth_dev + * Pointer to the structure rte_eth_dev + * @param q_no + * Queue number + * @param num_rx_descs + * Number of entries in the queue + * @param socket_id + * Where to allocate memory + * @param rx_conf + * Pointer to the struction rte_eth_rxconf + * @param mp + * Pointer to the packet pool + * + * @return + * - On success, return 0 + * - On failure, return -1 + */ +static int +lio_dev_rx_queue_setup(struct rte_eth_dev *eth_dev, uint16_t q_no, + uint16_t num_rx_descs, unsigned int socket_id, + const struct rte_eth_rxconf *rx_conf __rte_unused, + struct rte_mempool *mp) +{ + struct lio_device *lio_dev = LIO_DEV(eth_dev); + struct rte_pktmbuf_pool_private *mbp_priv; + uint32_t fw_mapped_oq; + uint16_t buf_size; + + if (q_no >= lio_dev->nb_rx_queues) { + lio_dev_err(lio_dev, "Invalid rx queue number %u\n", q_no); + return -EINVAL; + } + + lio_dev_dbg(lio_dev, "setting up rx queue %u\n", q_no); + + fw_mapped_oq = lio_dev->linfo.rxpciq[q_no].s.q_no; + + if ((lio_dev->droq[fw_mapped_oq]) && + (num_rx_descs != lio_dev->droq[fw_mapped_oq]->max_count)) { + lio_dev_err(lio_dev, + "Reconfiguring Rx descs not supported. Configure descs to same value %u or restart application\n", + lio_dev->droq[fw_mapped_oq]->max_count); + return -ENOTSUP; + } + + mbp_priv = rte_mempool_get_priv(mp); + buf_size = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM; + + if (lio_setup_droq(lio_dev, fw_mapped_oq, num_rx_descs, buf_size, mp, + socket_id)) { + lio_dev_err(lio_dev, "droq allocation failed\n"); + return -1; + } + + eth_dev->data->rx_queues[q_no] = lio_dev->droq[fw_mapped_oq]; + + return 0; +} + static int lio_dev_configure(struct rte_eth_dev *eth_dev) { struct lio_device *lio_dev = LIO_DEV(eth_dev); @@ -199,6 +265,7 @@ nic_config_fail: /* Define our ethernet definitions */ static const struct eth_dev_ops liovf_eth_dev_ops = { .dev_configure = lio_dev_configure, + .rx_queue_setup = lio_dev_rx_queue_setup, }; static void diff --git a/drivers/net/liquidio/lio_rxtx.c b/drivers/net/liquidio/lio_rxtx.c index 7e2202c387..942fe9b378 100644 --- a/drivers/net/liquidio/lio_rxtx.c +++ b/drivers/net/liquidio/lio_rxtx.c @@ -62,6 +62,174 @@ lio_dma_zone_free(struct lio_device *lio_dev, const struct rte_memzone *mz) lio_dev_err(lio_dev, "Memzone free Failed ret %d\n", ret); } +/** + * Frees the space for descriptor ring for the droq. + * + * @param lio_dev - pointer to the lio device structure + * @param q_no - droq no. + */ +static void +lio_delete_droq(struct lio_device *lio_dev, uint32_t q_no) +{ + struct lio_droq *droq = lio_dev->droq[q_no]; + + lio_dev_dbg(lio_dev, "OQ[%d]\n", q_no); + + rte_free(droq->recv_buf_list); + droq->recv_buf_list = NULL; + lio_dma_zone_free(lio_dev, droq->info_mz); + lio_dma_zone_free(lio_dev, droq->desc_ring_mz); + + memset(droq, 0, LIO_DROQ_SIZE); +} + +static void * +lio_alloc_info_buffer(struct lio_device *lio_dev, + struct lio_droq *droq, unsigned int socket_id) +{ + droq->info_mz = rte_eth_dma_zone_reserve(lio_dev->eth_dev, + "info_list", droq->q_no, + (droq->max_count * + LIO_DROQ_INFO_SIZE), + RTE_CACHE_LINE_SIZE, + socket_id); + + if (droq->info_mz == NULL) + return NULL; + + droq->info_list_dma = droq->info_mz->phys_addr; + droq->info_alloc_size = droq->info_mz->len; + droq->info_base_addr = (size_t)droq->info_mz->addr; + + return droq->info_mz->addr; +} + +/** + * Allocates space for the descriptor ring for the droq and + * sets the base addr, num desc etc in Octeon registers. + * + * @param lio_dev - pointer to the lio device structure + * @param q_no - droq no. + * @param app_ctx - pointer to application context + * @return Success: 0 Failure: -1 + */ +static int +lio_init_droq(struct lio_device *lio_dev, uint32_t q_no, + uint32_t num_descs, uint32_t desc_size, + struct rte_mempool *mpool, unsigned int socket_id) +{ + uint32_t c_refill_threshold; + uint32_t desc_ring_size; + struct lio_droq *droq; + + lio_dev_dbg(lio_dev, "OQ[%d]\n", q_no); + + droq = lio_dev->droq[q_no]; + droq->lio_dev = lio_dev; + droq->q_no = q_no; + droq->mpool = mpool; + + c_refill_threshold = LIO_OQ_REFILL_THRESHOLD_CFG(lio_dev); + + droq->max_count = num_descs; + droq->buffer_size = desc_size; + + desc_ring_size = droq->max_count * LIO_DROQ_DESC_SIZE; + droq->desc_ring_mz = rte_eth_dma_zone_reserve(lio_dev->eth_dev, + "droq", q_no, + desc_ring_size, + RTE_CACHE_LINE_SIZE, + socket_id); + + if (droq->desc_ring_mz == NULL) { + lio_dev_err(lio_dev, + "Output queue %d ring alloc failed\n", q_no); + return -1; + } + + droq->desc_ring_dma = droq->desc_ring_mz->phys_addr; + droq->desc_ring = (struct lio_droq_desc *)droq->desc_ring_mz->addr; + + lio_dev_dbg(lio_dev, "droq[%d]: desc_ring: virt: 0x%p, dma: %lx\n", + q_no, droq->desc_ring, (unsigned long)droq->desc_ring_dma); + lio_dev_dbg(lio_dev, "droq[%d]: num_desc: %d\n", q_no, + droq->max_count); + + droq->info_list = lio_alloc_info_buffer(lio_dev, droq, socket_id); + if (droq->info_list == NULL) { + lio_dev_err(lio_dev, "Cannot allocate memory for info list.\n"); + goto init_droq_fail; + } + + droq->recv_buf_list = rte_zmalloc_socket("recv_buf_list", + (droq->max_count * + LIO_DROQ_RECVBUF_SIZE), + RTE_CACHE_LINE_SIZE, + socket_id); + if (droq->recv_buf_list == NULL) { + lio_dev_err(lio_dev, + "Output queue recv buf list alloc failed\n"); + goto init_droq_fail; + } + + droq->refill_threshold = c_refill_threshold; + + rte_spinlock_init(&droq->lock); + + lio_dev->io_qmask.oq |= (1ULL << q_no); + + return 0; + +init_droq_fail: + lio_delete_droq(lio_dev, q_no); + + return -1; +} + +int +lio_setup_droq(struct lio_device *lio_dev, int oq_no, int num_descs, + int desc_size, struct rte_mempool *mpool, unsigned int socket_id) +{ + struct lio_droq *droq; + + PMD_INIT_FUNC_TRACE(); + + if (lio_dev->droq[oq_no]) { + lio_dev_dbg(lio_dev, "Droq %d in use\n", oq_no); + return 0; + } + + /* Allocate the DS for the new droq. */ + droq = rte_zmalloc_socket("ethdev RX queue", sizeof(*droq), + RTE_CACHE_LINE_SIZE, socket_id); + if (droq == NULL) + return -ENOMEM; + + lio_dev->droq[oq_no] = droq; + + /* Initialize the Droq */ + if (lio_init_droq(lio_dev, oq_no, num_descs, desc_size, mpool, + socket_id)) { + lio_dev_err(lio_dev, "Droq[%u] Initialization Failed\n", oq_no); + rte_free(lio_dev->droq[oq_no]); + lio_dev->droq[oq_no] = NULL; + return -ENOMEM; + } + + lio_dev->num_oqs++; + + lio_dev_dbg(lio_dev, "Total number of OQ: %d\n", lio_dev->num_oqs); + + /* Send credit for octeon output queues. credits are always + * sent after the output queue is enabled. + */ + rte_write32(lio_dev->droq[oq_no]->max_count, + lio_dev->droq[oq_no]->pkts_credit_reg); + rte_wmb(); + + return 0; +} + /** * lio_init_instr_queue() * @param lio_dev - pointer to the lio device structure. diff --git a/drivers/net/liquidio/lio_rxtx.h b/drivers/net/liquidio/lio_rxtx.h index 9e2d967c6b..05f4704adf 100644 --- a/drivers/net/liquidio/lio_rxtx.h +++ b/drivers/net/liquidio/lio_rxtx.h @@ -50,6 +50,58 @@ #define lio_uptime \ (size_t)(rte_get_timer_cycles() / rte_get_timer_hz()) +/** Descriptor format. + * The descriptor ring is made of descriptors which have 2 64-bit values: + * -# Physical (bus) address of the data buffer. + * -# Physical (bus) address of a lio_droq_info structure. + * The device DMA's incoming packets and its information at the address + * given by these descriptor fields. + */ +struct lio_droq_desc { + /** The buffer pointer */ + uint64_t buffer_ptr; + + /** The Info pointer */ + uint64_t info_ptr; +}; + +#define LIO_DROQ_DESC_SIZE (sizeof(struct lio_droq_desc)) + +/** Information about packet DMA'ed by Octeon. + * The format of the information available at Info Pointer after Octeon + * has posted a packet. Not all descriptors have valid information. Only + * the Info field of the first descriptor for a packet has information + * about the packet. + */ +struct lio_droq_info { + /** The Output Receive Header. */ + union octeon_rh rh; + + /** The Length of the packet. */ + uint64_t length; +}; + +#define LIO_DROQ_INFO_SIZE (sizeof(struct lio_droq_info)) + +/** Pointer to data buffer. + * Driver keeps a pointer to the data buffer that it made available to + * the Octeon device. Since the descriptor ring keeps physical (bus) + * addresses, this field is required for the driver to keep track of + * the virtual address pointers. + */ +struct lio_recv_buffer { + /** Packet buffer, including meta data. */ + void *buffer; + + /** Data in the packet buffer. */ + uint8_t *data; + +}; + +#define LIO_DROQ_RECVBUF_SIZE (sizeof(struct lio_recv_buffer)) + +#define LIO_DROQ_SIZE (sizeof(struct lio_droq)) + #define LIO_IQ_SEND_OK 0 #define LIO_IQ_SEND_STOP 1 #define LIO_IQ_SEND_FAILED -1 @@ -458,6 +510,10 @@ lio_incr_index(uint32_t index, uint32_t count, uint32_t max) return index; } +int lio_setup_droq(struct lio_device *lio_dev, int q_no, int num_descs, + int desc_size, struct rte_mempool *mpool, + unsigned int socket_id); + /** Setup instruction queue zero for the device * @param lio_dev which lio device to setup * diff --git a/drivers/net/liquidio/lio_struct.h b/drivers/net/liquidio/lio_struct.h index 48c4cae16a..3df79e1231 100644 --- a/drivers/net/liquidio/lio_struct.h +++ b/drivers/net/liquidio/lio_struct.h @@ -56,6 +56,150 @@ struct lio_version { uint16_t reserved; }; +/** The Descriptor Ring Output Queue structure. + * This structure has all the information required to implement a + * DROQ. + */ +struct lio_droq { + /** A spinlock to protect access to this ring. */ + rte_spinlock_t lock; + + uint32_t q_no; + + uint32_t pkt_count; + + struct lio_device *lio_dev; + + /** The 8B aligned descriptor ring starts at this address. */ + struct lio_droq_desc *desc_ring; + + /** Index in the ring where the driver should read the next packet */ + uint32_t read_idx; + + /** Index in the ring where Octeon will write the next packet */ + uint32_t write_idx; + + /** Index in the ring where the driver will refill the descriptor's + * buffer + */ + uint32_t refill_idx; + + /** Packets pending to be processed */ + rte_atomic64_t pkts_pending; + + /** Number of descriptors in this ring. */ + uint32_t max_count; + + /** The number of descriptors pending refill. */ + uint32_t refill_count; + + uint32_t refill_threshold; + + /** The 8B aligned info ptrs begin from this address. */ + struct lio_droq_info *info_list; + + /** The receive buffer list. This list has the virtual addresses of the + * buffers. + */ + struct lio_recv_buffer *recv_buf_list; + + /** The size of each buffer pointed by the buffer pointer. */ + uint32_t buffer_size; + + /** Pointer to the mapped packet credit register. + * Host writes number of info/buffer ptrs available to this register + */ + void *pkts_credit_reg; + + /** Pointer to the mapped packet sent register. + * Octeon writes the number of packets DMA'ed to host memory + * in this register. + */ + void *pkts_sent_reg; + + /** DMA mapped address of the DROQ descriptor ring. */ + size_t desc_ring_dma; + + /** Info ptr list are allocated at this virtual address. */ + size_t info_base_addr; + + /** DMA mapped address of the info list */ + size_t info_list_dma; + + /** Allocated size of info list. */ + uint32_t info_alloc_size; + + /** Memory zone **/ + const struct rte_memzone *desc_ring_mz; + const struct rte_memzone *info_mz; + struct rte_mempool *mpool; +}; + +/** Receive Header */ +union octeon_rh { +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t rh64; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t reserved : 17; + uint64_t ossp : 32; /** opcode/subcode specific parameters */ + } r; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t extra : 28; + uint64_t vlan : 12; + uint64_t priority : 3; + uint64_t csum_verified : 3; /** checksum verified. */ + uint64_t has_hwtstamp : 1; /** Has hardware timestamp.1 = yes.*/ + uint64_t encap_on : 1; + uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */ + } r_dh; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t reserved : 8; + uint64_t extra : 25; + uint64_t gmxport : 16; + } r_nic_info; +#else + uint64_t rh64; + struct { + uint64_t ossp : 32; /** opcode/subcode specific parameters */ + uint64_t reserved : 17; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r; + struct { + uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */ + uint64_t encap_on : 1; + uint64_t has_hwtstamp : 1; /** 1 = has hwtstamp */ + uint64_t csum_verified : 3; /** checksum verified. */ + uint64_t priority : 3; + uint64_t vlan : 12; + uint64_t extra : 28; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r_dh; + struct { + uint64_t gmxport : 16; + uint64_t extra : 25; + uint64_t reserved : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r_nic_info; +#endif +}; + +#define OCTEON_RH_SIZE (sizeof(union octeon_rh)) + /** The txpciq info passed to host from the firmware */ union octeon_txpciq { uint64_t txpciq64; @@ -380,6 +524,11 @@ struct lio_device { /** The singly-linked tail queues of instruction response */ struct lio_response_list response_list; + uint32_t num_oqs; + + /** The DROQ output queues */ + struct lio_droq *droq[LIO_MAX_POSSIBLE_OUTPUT_QUEUES]; + struct lio_io_enable io_qmask; struct lio_sriov_info sriov_info; -- 2.20.1