From 3100ab4b09454d9145acd4594f0154f815d0c0f6 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 29 May 2019 17:02:26 -0400 Subject: [PATCH] net/bnxt: update HWRM API to version 1.10.0.48 Update HWRM version to 1.10.0.48 Signed-off-by: Ajit Khaparde Signed-off-by: Lance Richardson --- drivers/net/bnxt/hsi_struct_def_dpdk.h | 3156 +++++++++++++++++++++--- 1 file changed, 2874 insertions(+), 282 deletions(-) diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index 354f9a93a2..e10645be18 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -260,6 +260,7 @@ struct cmd_nums { */ uint16_t req_type; #define HWRM_VER_GET UINT32_C(0x0) + #define HWRM_ERROR_RECOVERY_QCFG UINT32_C(0xc) #define HWRM_FUNC_DRV_IF_CHANGE UINT32_C(0xd) #define HWRM_FUNC_BUF_UNRGTR UINT32_C(0xe) #define HWRM_FUNC_VF_CFG UINT32_C(0xf) @@ -372,6 +373,8 @@ struct cmd_nums { #define HWRM_STAT_CTX_QUERY UINT32_C(0xb2) #define HWRM_STAT_CTX_CLR_STATS UINT32_C(0xb3) #define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4) + #define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5) + #define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6) #define HWRM_FW_RESET UINT32_C(0xc0) #define HWRM_FW_QSTATUS UINT32_C(0xc1) #define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2) @@ -397,6 +400,8 @@ struct cmd_nums { #define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2) #define HWRM_WOL_REASON_QCFG UINT32_C(0xf3) /* Experimental */ + #define HWRM_CFA_METER_QCAPS UINT32_C(0xf4) + /* Experimental */ #define HWRM_CFA_METER_PROFILE_ALLOC UINT32_C(0xf5) /* Experimental */ #define HWRM_CFA_METER_PROFILE_FREE UINT32_C(0xf6) @@ -407,6 +412,8 @@ struct cmd_nums { /* Experimental */ #define HWRM_CFA_METER_INSTANCE_FREE UINT32_C(0xf9) /* Experimental */ + #define HWRM_CFA_METER_INSTANCE_CFG UINT32_C(0xfa) + /* Experimental */ #define HWRM_CFA_VFR_ALLOC UINT32_C(0xfd) /* Experimental */ #define HWRM_CFA_VFR_FREE UINT32_C(0xfe) @@ -451,6 +458,34 @@ struct cmd_nums { #define HWRM_CFA_FLOW_AGING_QCFG UINT32_C(0x115) /* Experimental */ #define HWRM_CFA_FLOW_AGING_QCAPS UINT32_C(0x116) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_RGTR UINT32_C(0x117) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_UNRGTR UINT32_C(0x118) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_QCTX UINT32_C(0x119) + /* Experimental */ + #define HWRM_CFA_CTX_MEM_QCAPS UINT32_C(0x11a) + /* Experimental */ + #define HWRM_CFA_COUNTER_QCAPS UINT32_C(0x11b) + /* Experimental */ + #define HWRM_CFA_COUNTER_CFG UINT32_C(0x11c) + /* Experimental */ + #define HWRM_CFA_COUNTER_QCFG UINT32_C(0x11d) + /* Experimental */ + #define HWRM_CFA_COUNTER_QSTATS UINT32_C(0x11e) + /* Experimental */ + #define HWRM_CFA_TCP_FLAG_PROCESS_QCFG UINT32_C(0x11f) + /* Experimental */ + #define HWRM_CFA_EEM_QCAPS UINT32_C(0x120) + /* Experimental */ + #define HWRM_CFA_EEM_CFG UINT32_C(0x121) + /* Experimental */ + #define HWRM_CFA_EEM_QCFG UINT32_C(0x122) + /* Experimental */ + #define HWRM_CFA_EEM_OP UINT32_C(0x123) + /* Experimental */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124) /* Engine CKV - Ping the device and SRT firmware to get the public key. */ #define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d) /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */ @@ -469,6 +504,8 @@ struct cmd_nums { #define HWRM_ENGINE_CKV_RNG_GET UINT32_C(0x134) /* Engine CKV - Generate and encrypt a new AES key. */ #define HWRM_ENGINE_CKV_KEY_GEN UINT32_C(0x135) + /* Engine CKV - Configure a label index with a label value. */ + #define HWRM_ENGINE_CKV_KEY_LABEL_CFG UINT32_C(0x136) /* Engine - Query the available queue groups configuration. */ #define HWRM_ENGINE_QG_CONFIG_QUERY UINT32_C(0x13c) /* Engine - Query the queue groups assigned to a function. */ @@ -523,6 +560,8 @@ struct cmd_nums { #define HWRM_ENGINE_NQ_FREE UINT32_C(0x163) /* Engine - Set the on-die RQE credit update location. */ #define HWRM_ENGINE_ON_DIE_RQE_CREDITS UINT32_C(0x164) + /* Engine - Query the engine function configuration. */ + #define HWRM_ENGINE_FUNC_QCFG UINT32_C(0x165) /* Experimental */ #define HWRM_FUNC_RESOURCE_QCAPS UINT32_C(0x190) /* Experimental */ @@ -573,6 +612,10 @@ struct cmd_nums { /* */ #define HWRM_DBG_RING_INFO_GET UINT32_C(0xff1c) /* Experimental */ + #define HWRM_DBG_CRASHDUMP_HEADER UINT32_C(0xff1d) + /* Experimental */ + #define HWRM_DBG_CRASHDUMP_ERASE UINT32_C(0xff1e) + /* Experimental */ #define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee) #define HWRM_NVM_VALIDATE_OPTION UINT32_C(0xffef) #define HWRM_NVM_FLUSH UINT32_C(0xfff0) @@ -724,8 +767,8 @@ struct hwrm_err_output { #define HWRM_NA_SIGNATURE ((uint32_t)(-1)) /* hwrm_func_buf_rgtr */ #define HWRM_MAX_REQ_LEN 128 -/* hwrm_selftest_qlist */ -#define HWRM_MAX_RESP_LEN 280 +/* hwrm_cfa_flow_info */ +#define HWRM_MAX_RESP_LEN 704 /* 7 bit indirection table index. */ #define HW_HASH_INDEX_SIZE 0x80 #define HW_HASH_KEY_SIZE 40 @@ -735,8 +778,8 @@ struct hwrm_err_output { #define HWRM_VERSION_MINOR 10 #define HWRM_VERSION_UPDATE 0 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 19 -#define HWRM_VERSION_STR "1.10.0.19" +#define HWRM_VERSION_RSVD 48 +#define HWRM_VERSION_STR "1.10.0.48" /**************** * hwrm_ver_get * @@ -993,6 +1036,32 @@ struct hwrm_ver_get_output { */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FLOW_AGING_SUPPORTED \ UINT32_C(0x200) + /* + * If set to 1, firmware is capable to support advanced flow counters like, + * Meter drop counters and EEM counters. + * If set to 0, firmware is not capable to support advanced flow counters. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_ADV_FLOW_COUNTERS_SUPPORTED \ + UINT32_C(0x400) + /* + * If set to 1, the firmware is able to support the use of the CFA + * Extended Exact Match(EEM) feature. + * If set to 0, firmware is not capable to support the use of the + * CFA EEM feature. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_EEM_SUPPORTED \ + UINT32_C(0x800) + /* + * If set to 1, the firmware is able to support advance CFA flow management + * features reported in the HWRM_CFA_FLOW_MGNT_QCAPS. + * If set to 0, then the firmware doesn’t support the advance CFA flow management + * features. + * By default, this flag should be 0 for older version of core firmware. + */ + #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_ADV_FLOW_MGNT_SUPPORTED \ + UINT32_C(0x1000) /* * This field represents the major version of RoCE firmware. * A change in major version represents a major release. @@ -3695,6 +3764,9 @@ struct hwrm_async_event_cmpl { /* Reset notification to clients */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \ UINT32_C(0x8) + /* Master function selection event */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \ + UINT32_C(0x9) /* Function driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \ UINT32_C(0x10) @@ -3739,6 +3811,40 @@ struct hwrm_async_event_cmpl { */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION \ UINT32_C(0x37) + /* + * A EEM flow cached memory flush request event being posted to the PF + * driver. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_REQ \ + UINT32_C(0x38) + /* + * A EEM flow cache memory flush completion event being posted to the + * firmware by the PF driver. This is indication that host EEM flush + * has completed by the PF. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_DONE \ + UINT32_C(0x39) + /* + * A tcp flag action change event being posted to the PF or trusted VF + * driver by the firmware. The PF or trusted VF driver should query + * the firmware for the new TCP flag action update after receiving + * this async event. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TCP_FLAG_ACTION_CHANGE \ + UINT32_C(0x3a) + /* + * A eem flow active event being posted to the PF or trusted VF driver + * by the firmware. The PF or trusted VF driver should update the + * flow's aging timer after receiving this async event. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_FLOW_ACTIVE \ + UINT32_C(0x3b) + /* + * A eem cfg change event being posted to the trusted VF driver by the + * firmware if the parent PF EEM configuration changed. + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \ + UINT32_C(0x3c) /* * A trace log message. This contains firmware trace logs string * embedded in the asynchronous message. This is an experimental @@ -4450,6 +4556,75 @@ struct hwrm_async_event_cmpl_reset_notify { 16 } __attribute__((packed)); +/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */ +struct hwrm_async_event_cmpl_error_recovery { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* + * This async notification message can be used for selecting or + * deselecting master function for error recovery, + * and to communicate to all the functions whether error recovery + * was enabled/disabled. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY \ + UINT32_C(0x9) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_SFT 1 + /* 8-lsb timestamp (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates driver action requested */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_SFT \ + 0 + /* + * If set to 1, this function is selected as Master function. + * This function has responsibility to do 'chip reset' when it + * detects a fatal error. If set to 0, master function functionality + * is disabled on this function. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASTER_FUNC \ + UINT32_C(0x1) + /* + * If set to 1, error recovery is enabled. + * If set to 0, error recovery is disabled. + */ + #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \ + UINT32_C(0x2) +} __attribute__((packed)); + /* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ struct hwrm_async_event_cmpl_func_drvr_unload { uint16_t type; @@ -5182,8 +5357,8 @@ struct hwrm_async_event_cmpl_hw_flow_aged { HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX } __attribute__((packed)); -/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ -struct hwrm_async_event_cmpl_hwrm_error { +/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cache_flush_req { uint16_t type; /* * This field indicates the exact type of the completion. @@ -5192,133 +5367,549 @@ struct hwrm_async_event_cmpl_hwrm_error { * records. Odd values indicate 32B * records. */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \ UINT32_C(0x3f) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_SFT \ + 0 /* HWRM Asynchronous Event Information */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; - /* HWRM Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR + /* Notification of a eem_cache_flush request */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ \ + UINT32_C(0x38) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ /* Event specific data */ uint32_t event_data2; - /* Severity of HWRM Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ - UINT32_C(0xff) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 - /* Warning */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ - UINT32_C(0x0) - /* Non-fatal Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ - UINT32_C(0x1) - /* Fatal Error */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ - UINT32_C(0x2) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ - HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \ + UINT32_C(0x1) /* opaque is 7 b */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; - /* Time stamp for error event */ - #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ - UINT32_C(0x1) } __attribute__((packed)); -/******************* - * hwrm_func_reset * - *******************/ - - -/* hwrm_func_reset_input (size:192b/24B) */ -struct hwrm_func_reset_input { - /* The HWRM command request type. */ - uint16_t req_type; +/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cache_flush_done { + uint16_t type; /* - * The completion ring to send the completion event on. This should - * be the NQ ID returned from the `nq_alloc` HWRM command. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t cmpl_ring; + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; /* - * The sequence ID is used by the driver for tracking multiple - * commands. This ID is treated as opaque data by the firmware and - * the value is returned in the `hwrm_resp_hdr` upon completion. + * Notification of a host eem_cache_flush has completed. This event + * is generated by the host driver. */ - uint16_t seq_id; + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE \ + UINT32_C(0x39) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * The target ID of the command: - * * 0x0-0xFFF8 - The function ID - * * 0xFFF8-0xFFFE - Reserved for internal processors - * * 0xFFFF - HWRM + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - uint16_t target_id; + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates function ID that this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_MASK \ + UINT32_C(0xffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \ + 0 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_tcp_flag_action_change { + uint16_t type; /* - * A physical address pointer pointing to a host buffer that the - * command's response data will be written. This can be either a host - * physical address (HPA) or a guest physical address (GPA) and must - * point to a physically contiguous block of memory. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint64_t resp_addr; - uint32_t enables; + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_SFT \ + 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of tcp flag action change */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE \ + UINT32_C(0x3a) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; /* - * This bit must be '1' for the vf_id_valid field to be - * configured. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \ + UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_flow_active { + uint16_t type; /* - * The ID of the VF that this PF is trying to reset. - * Only the parent PF shall be allowed to reset a child VF. - * - * A parent PF driver shall use this field only when a specific child VF - * is requested to be reset. + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. */ - uint16_t vf_id; - /* This value indicates the level of a function reset. */ - uint8_t func_reset_level; + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of an active eem flow */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE \ + UINT32_C(0x3b) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE + /* Event specific data */ + uint32_t event_data2; + /* Indicates the 2nd global id this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_SFT \ + 0 /* - * Reset the caller function and its children VFs (if any). If no - * children functions exist, then reset the caller function only. - */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ - UINT32_C(0x0) - /* Reset the caller function only */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ - UINT32_C(0x1) + * Indicates flow direction of the flow identified by + * the global_id_2. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION \ + UINT32_C(0x40000000) + /* If this bit is set to 0, then it indicates that this rx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_RX \ + (UINT32_C(0x0) << 30) + /* If this bit is set to 1, then it indicates that this tx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX \ + (UINT32_C(0x1) << 30) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX + uint8_t opaque_v; /* - * Reset all children VFs of the caller function driver if the - * caller is a PF driver. - * It is an error to specify this level by a VF driver. - * It is an error to specify this level by a PF driver with - * no children VFs. + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ - #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ - UINT32_C(0x2) - /* - * Reset a specific VF of the caller function driver if the caller - * is the parent PF driver. - * It is an error to specify this level by a VF driver. - * It is an error to specify this level by a PF driver that is not - * the parent of the VF that is being requested to reset. + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_MASK \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Indicates the 1st global id this event occurred on. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_MASK \ + UINT32_C(0x3fffffff) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_SFT \ + 0 + /* + * Indicates flow direction of the flow identified by the + * global_id_1. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION \ + UINT32_C(0x40000000) + /* If this bit is set to 0, then it indicates that this is rx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_RX \ + (UINT32_C(0x0) << 30) + /* If this bit is set to 1, then it indicates that this is tx flow. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX \ + (UINT32_C(0x1) << 30) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX + /* + * Indicates EEM flow aging mode this event occurred on. If + * this bit is set to 0, the event_data1 is the EEM global + * ID. If this bit is set to 1, the event_data1 is the number + * of global ID in the context memory. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE \ + UINT32_C(0x80000000) + /* EEM flow aging mode 0. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_0 \ + (UINT32_C(0x0) << 31) + /* EEM flow aging mode 1. */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 \ + (UINT32_C(0x1) << 31) + #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */ +struct hwrm_async_event_cmpl_eem_cfg_change { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Notification of EEM configuration change */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE \ + UINT32_C(0x3c) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE + /* Event specific data */ + uint32_t event_data2; + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* + * Value of 1 to indicate EEM TX configuration is enabled. Value of + * 0 to indicate the EEM TX configuration is disabled. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_TX_ENABLE \ + UINT32_C(0x1) + /* + * Value of 1 to indicate EEM RX configuration is enabled. Value of 0 + * to indicate the EEM RX configuration is disabled. + */ + #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \ + UINT32_C(0x2) +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */ +struct hwrm_async_event_cmpl_fw_trace_msg { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* Firmware trace log message */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG \ + UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG + /* Trace byte 0 to 3 */ + uint32_t event_data2; + /* Trace byte0 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_SFT 0 + /* Trace byte1 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_SFT 8 + /* Trace byte2 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_SFT 16 + /* Trace byte3 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_MASK \ + UINT32_C(0xff000000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_SFT 24 + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_SFT 1 + /* Trace flags */ + uint8_t timestamp_lo; + /* Indicates if the string is partial or complete. */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING \ + UINT32_C(0x1) + /* Complete string */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_COMPLETE \ + UINT32_C(0x0) + /* Partial string */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL \ + UINT32_C(0x1) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL + /* Indicates the firmware that sent the trace message. */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE \ + UINT32_C(0x2) + /* Primary firmware */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_PRIMARY \ + (UINT32_C(0x0) << 1) + /* Secondary firmware */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY \ + (UINT32_C(0x1) << 1) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_LAST \ + HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY + /* Trace byte 4 to 5 */ + uint16_t timestamp_hi; + /* Trace byte4 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_SFT 0 + /* Trace byte5 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_SFT 8 + /* Trace byte 6 to 9 */ + uint32_t event_data1; + /* Trace byte6 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_SFT 0 + /* Trace byte7 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_MASK \ + UINT32_C(0xff00) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_SFT 8 + /* Trace byte8 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_MASK \ + UINT32_C(0xff0000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_SFT 16 + /* Trace byte9 */ + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \ + UINT32_C(0xff000000) + #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24 +} __attribute__((packed)); + +/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ +struct hwrm_async_event_cmpl_hwrm_error { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* HWRM Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR + /* Event specific data */ + uint32_t event_data2; + /* Severity of HWRM Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 + /* Warning */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ + UINT32_C(0x0) + /* Non-fatal Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ + UINT32_C(0x1) + /* Fatal Error */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ + HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Time stamp for error event */ + #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ + UINT32_C(0x1) +} __attribute__((packed)); + +/******************* + * hwrm_func_reset * + *******************/ + + +/* hwrm_func_reset_input (size:192b/24B) */ +struct hwrm_func_reset_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the vf_id_valid field to be + * configured. + */ + #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) + /* + * The ID of the VF that this PF is trying to reset. + * Only the parent PF shall be allowed to reset a child VF. + * + * A parent PF driver shall use this field only when a specific child VF + * is requested to be reset. + */ + uint16_t vf_id; + /* This value indicates the level of a function reset. */ + uint8_t func_reset_level; + /* + * Reset the caller function and its children VFs (if any). If no + * children functions exist, then reset the caller function only. + */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ + UINT32_C(0x0) + /* Reset the caller function only */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ + UINT32_C(0x1) + /* + * Reset all children VFs of the caller function driver if the + * caller is a PF driver. + * It is an error to specify this level by a VF driver. + * It is an error to specify this level by a PF driver with + * no children VFs. + */ + #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ + UINT32_C(0x2) + /* + * Reset a specific VF of the caller function driver if the caller + * is the parent PF driver. + * It is an error to specify this level by a VF driver. + * It is an error to specify this level by a PF driver that is not + * the parent of the VF that is being requested to reset. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ UINT32_C(0x3) @@ -6066,6 +6657,12 @@ struct hwrm_func_qcaps_output { */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_HOT_RESET_CAPABLE \ UINT32_C(0x400000) + /* + * This flag will be set to 1 by the FW if FW supports adapter error + * recovery. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERROR_RECOVERY_CAPABLE \ + UINT32_C(0x800000) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no @@ -6813,8 +7410,7 @@ struct hwrm_func_cfg_input { * resident HWRM clients, only the parent PF driver shall be allowed * to initiate this change on one of its children VFs. If this bit is * set to 1, then the VF that is being configured is requested to be - * trusted. If this bit is set to 0, then the VF that is being configured - * is requested to be not trusted. + * trusted. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \ UINT32_C(0x200000) @@ -6825,6 +7421,25 @@ struct hwrm_func_cfg_input { */ #define HWRM_FUNC_CFG_INPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \ UINT32_C(0x400000) + /* + * This bit requests that the firmware test to see if all the assets + * requested in this command (i.e. number of NQ rings) are available. + * The firmware will return an error if the requested assets are + * not available. The firwmare will NOT reserve the assets if they + * are available. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_NQ_ASSETS_TEST \ + UINT32_C(0x800000) + /* + * This configuration change can be initiated by a PF driver. This + * configuration request shall be targeted to a VF. From local host + * resident HWRM clients, only the parent PF driver shall be allowed + * to initiate this change on one of its children VFs. If this bit is + * set to 1, then the VF that is being configured is requested to be + * untrusted. + */ + #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_DISABLE \ + UINT32_C(0x1000000) uint32_t enables; /* * This bit must be '1' for the mtu field to be @@ -7593,6 +8208,19 @@ struct hwrm_func_drv_rgtr_input { */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_HOT_RESET_SUPPORT \ UINT32_C(0x10) + /* + * When this bit is 1, the function is indicating the support of the + * error recovery capability. Error recovery support will be used by + * firmware only if all the driver instances support error recovery + * process. By setting this bit, driver is indicating support for + * corresponding async event completion message. These will be + * delivered to the driver even if they did not register for it. + * If supported, after receiving reset notify async event with fatal + * flag set in event data1, then all the drivers have to tear down + * their resources without sending any HWRM commands to FW. + */ + #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT \ + UINT32_C(0x20) uint32_t enables; /* * This bit must be '1' for the os_type field to be @@ -10270,17 +10898,384 @@ struct hwrm_func_backing_store_qcfg_output { uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as 1 * to indicate that the output has been completely written. - * When writing a command completion or response to an internal processor, - * the order of writes has to be such that this field is written last. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. */ uint8_t valid; } __attribute__((packed)); -/*********************** - * hwrm_func_vlan_qcfg * - ***********************/ +/**************************** + * hwrm_error_recovery_qcfg * + ****************************/ + + +/* hwrm_error_recovery_qcfg_input (size:192b/24B) */ +struct hwrm_error_recovery_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint8_t unused_0[8]; +} __attribute__((packed)); + +/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */ +struct hwrm_error_recovery_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When this flag is set to 1, error recovery will be initiated + * through master function driver. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_HOST UINT32_C(0x1) + /* + * When this flag is set to 1, error recovery will be performed + * through Co processor. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_CO_CPU UINT32_C(0x2) + /* + * Driver Polling frequency. This value is in units of 100msec. + * Typical value would be 10 to indicate 1sec. + * Drivers can poll FW health status, Heartbeat, reset_counter with + * this frequency. + */ + uint32_t driver_polling_freq; + /* + * This value is in units of 100msec. + * Typical value would be 30 to indicate 3sec. + * Master function wait period from detecting a fatal error to + * initiating reset. In this time period Master PF expects every + * active driver will detect fatal error. + */ + uint32_t master_func_wait_period; + /* + * This value is in units of 100msec. + * Typical value would be 50 to indicate 5sec. + * Normal function wait period from fatal error detection to + * polling FW health status. In this time period, drivers should not + * do any PCIe MMIO transaction and should not send any HWRM commands. + */ + uint32_t normal_func_wait_period; + /* + * This value is in units of 100msec. + * Typical value would be 20 to indicate 2sec. + * This field indicates that, master function wait period after chip + * reset. After this time, master function should reinitialize with + * FW. + */ + uint32_t master_func_wait_period_after_reset; + /* + * This value is in units of 100msec. + * Typical value would be 60 to indicate 6sec. + * This field is applicable to both master and normal functions. + * Even after chip reset, if FW status not changed to ready, + * then all the functions can poll for this much time and bailout. + */ + uint32_t max_bailout_time_after_reset; + /* + * FW health status register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates upper 30bits of the register address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_health_status_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SFT \ + 2 + /* + * FW HeartBeat register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_heartbeat_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SFT \ + 2 + /* + * FW reset counter. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t fw_reset_cnt_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SFT \ + 2 + /* + * Reset Inprogress Register address for PFs. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t reset_inprogress_reg; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_SFT \ + 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SFT \ + 2 + /* This field indicates the mask value for reset_inprogress_reg. */ + uint32_t reset_inprogress_reg_mask; + uint8_t unused_0[3]; + /* + * Array of registers and value count to reset the Chip + * Each array count has reset_reg, reset_reg_val, delay_after_reset + * in TLV format. Depending upon Chip type, number of reset registers + * will vary. Drivers have to write reset_reg_val in the reset_reg + * location in the same sequence in order to recover from a fatal + * error. + */ + uint8_t reg_array_cnt; + /* + * Reset register. + * Lower 2 bits indicates address space location and upper 30 bits + * indicates actual address. + * A value of 0xFFFF-FFFF indicates this register does not exist. + */ + uint32_t reset_reg[16]; + /* Lower 2 bits indicates address space location. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_MASK \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_SFT 0 + /* + * If value is 0, this register is located in PCIe config space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_PCIE_CFG \ + UINT32_C(0x0) + /* + * If value is 1, this register is located in GRC address space. + * Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_GRC \ + UINT32_C(0x1) + /* + * If value is 2, this register is located in first BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR0 \ + UINT32_C(0x2) + /* + * If value is 3, this register is located in second BAR address + * space. Drivers have to map appropriate window to access this + * register. + */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 \ + UINT32_C(0x3) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_LAST \ + HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 + /* Upper 30bits of the register address. */ + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_MASK \ + UINT32_C(0xfffffffc) + #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SFT 2 + /* Value to be written in reset_reg to reset the controller. */ + uint32_t reset_reg_val[16]; + /* + * This value is in units of 1msec. + * Typical value would be 10 to indicate 10msec. + * Some of the operations like Core reset require delay before + * accessing PCIE MMIO register space. + * If this value is non-zero, drivers have to wait for + * this much time after writing reset_reg_val in reset_reg. + */ + uint8_t delay_after_reset[16]; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, the order of writes has to be such that this field + * is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/*********************** + * hwrm_func_vlan_qcfg * + ***********************/ /* hwrm_func_vlan_qcfg_input (size:192b/24B) */ @@ -10894,6 +11889,12 @@ struct hwrm_func_drv_if_change_output { */ #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \ UINT32_C(0x1) + /* + * When this bit is '1', it indicates that the firmware got changed / reset. + * The driver should do complete re-initialization when that bit is set. + */ + #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_HOT_FW_RESET_DONE \ + UINT32_C(0x2) uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output @@ -14166,6 +15167,9 @@ struct hwrm_port_phy_qcaps_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \ UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \ + UINT32_C(0x4000) /* * This is a bit mask to indicate what speeds are supported * for autonegotiation on this link. @@ -14215,6 +15219,9 @@ struct hwrm_port_phy_qcaps_output { /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \ UINT32_C(0x2000) + /* 200Gb link speed */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \ + UINT32_C(0x4000) /* * This is a bit mask to indicate what speeds are supported * for EEE on this link. @@ -14281,13 +15288,13 @@ struct hwrm_port_phy_qcaps_output { #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24 } __attribute__((packed)); -/********************* - * hwrm_port_led_cfg * - *********************/ +/**************************** + * hwrm_port_phy_mdio_write * + ****************************/ -/* hwrm_port_led_cfg_input (size:512b/64B) */ -struct hwrm_port_led_cfg_input { +/* hwrm_port_phy_mdio_write_input (size:320b/40B) */ +struct hwrm_port_phy_mdio_write_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -14315,46 +15322,198 @@ struct hwrm_port_led_cfg_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t enables; + /* Reserved for future use. */ + uint32_t unused_0[2]; + /* Port ID of port. */ + uint16_t port_id; + /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */ + uint8_t phy_addr; + /* 8-bit device address. */ + uint8_t dev_addr; + /* 16-bit register address. */ + uint16_t reg_addr; + /* 16-bit register data. */ + uint16_t reg_data; + /* + * When this bit is set to 1 a Clause 45 mdio access is done. + * when this bit is set to 0 a Clause 22 mdio access is done. + */ + uint8_t cl45_mdio; + /* */ + uint8_t unused_1[7]; +} __attribute__((packed)); + +/* hwrm_port_phy_mdio_write_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_write_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; /* - * This bit must be '1' for the led0_id field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \ - UINT32_C(0x1) + uint8_t valid; +} __attribute__((packed)); + +/*************************** + * hwrm_port_phy_mdio_read * + ***************************/ + + +/* hwrm_port_phy_mdio_read_input (size:256b/32B) */ +struct hwrm_port_phy_mdio_read_input { + /* The HWRM command request type. */ + uint16_t req_type; /* - * This bit must be '1' for the led0_state field to be - * configured. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \ - UINT32_C(0x2) + uint16_t cmpl_ring; /* - * This bit must be '1' for the led0_color field to be - * configured. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \ - UINT32_C(0x4) + uint16_t seq_id; /* - * This bit must be '1' for the led0_blink_on field to be - * configured. + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \ - UINT32_C(0x8) + uint16_t target_id; /* - * This bit must be '1' for the led0_blink_off field to be - * configured. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \ - UINT32_C(0x10) + uint64_t resp_addr; + /* Reserved for future use. */ + uint32_t unused_0[2]; + /* Port ID of port. */ + uint16_t port_id; + /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */ + uint8_t phy_addr; + /* 8-bit device address. */ + uint8_t dev_addr; + /* 16-bit register address. */ + uint16_t reg_addr; /* - * This bit must be '1' for the led0_group_id field to be - * configured. + * When this bit is set to 1 a Clause 45 mdio access is done. + * when this bit is set to 0 a Clause 22 mdio access is done. */ - #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \ - UINT32_C(0x20) + uint8_t cl45_mdio; + /* */ + uint8_t unused_1; +} __attribute__((packed)); + +/* hwrm_port_phy_mdio_read_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_read_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* 16-bit register data. */ + uint16_t reg_data; + uint8_t unused_0[5]; /* - * This bit must be '1' for the led1_id field to be - * configured. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/********************* + * hwrm_port_led_cfg * + *********************/ + + +/* hwrm_port_led_cfg_input (size:512b/64B) */ +struct hwrm_port_led_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the led0_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \ + UINT32_C(0x1) + /* + * This bit must be '1' for the led0_state field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \ + UINT32_C(0x2) + /* + * This bit must be '1' for the led0_color field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \ + UINT32_C(0x4) + /* + * This bit must be '1' for the led0_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \ + UINT32_C(0x8) + /* + * This bit must be '1' for the led0_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \ + UINT32_C(0x10) + /* + * This bit must be '1' for the led0_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the led1_id field to be + * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \ UINT32_C(0x40) @@ -20644,7 +21803,9 @@ struct hwrm_ring_reset_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - uint8_t unused_0[7]; + uint8_t unused_0[4]; + /* Position of consumer index after ring reset completes. */ + uint8_t consumer_idx[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -21209,6 +22370,26 @@ struct hwrm_ring_grp_free_output { */ uint8_t valid; } __attribute__((packed)); +/* + * special reserved flow ID to identify per function default + * flows for vSwitch offload + */ +#define DEFAULT_FLOW_ID 0xFFFFFFFFUL +/* + * special reserved flow ID to identify per function RoCEv1 + * flows + */ +#define ROCEV1_FLOW_ID 0xFFFFFFFEUL +/* + * special reserved flow ID to identify per function RoCEv2 + * flows + */ +#define ROCEV2_FLOW_ID 0xFFFFFFFDUL +/* + * special reserved flow ID to identify per function RoCEv2 + * CNP flows + */ +#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL /**************************** * hwrm_cfa_l2_filter_alloc * @@ -22968,6 +24149,13 @@ struct hwrm_cfa_encap_record_alloc_input { /* Setting of this flag indicates the applicability to the loopback path. */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x1) + /* + * Setting of this flag indicates this encap record is external encap record. + * Resetting of this flag indicates this flag is internal encap record and + * this is the default setting. + */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \ + UINT32_C(0x2) /* Encapsulation Type. */ uint8_t encap_type; /* Virtual eXtensible Local Area Network (VXLAN) */ @@ -23003,8 +24191,11 @@ struct hwrm_cfa_encap_record_alloc_input { /* Use fixed layer 2 ether type of 0xFFFF */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \ UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \ - HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE + HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 uint8_t unused_0[3]; /* This value is encap data used for the given encap type. */ uint32_t encap_data[20]; @@ -23144,6 +24335,12 @@ struct hwrm_cfa_ntuple_filter_alloc_input { */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \ UINT32_C(0x4) + /* + * Setting of this flag indicates that the dest_id field contains function ID. + * If this is not set it indicates dest_id is VNIC or VPORT. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \ + UINT32_C(0x8) uint32_t enables; /* * This bit must be '1' for the l2_filter_id field to be @@ -23605,7 +24802,13 @@ struct hwrm_cfa_ntuple_filter_cfg_input { */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) - uint8_t unused_0[4]; + uint32_t flags; + /* + * Setting this bit to 1 indicates that dest_id field contains FID. + * Setting this to 0 indicates that dest_id field contains VNIC or VPORT. + */ + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \ + UINT32_C(0x1) /* This value is an opaque id into CFA data structures. */ uint64_t ntuple_filter_id; /* @@ -24090,6 +25293,118 @@ struct hwrm_cfa_em_flow_free_output { uint8_t valid; } __attribute__((packed)); +/************************ + * hwrm_cfa_meter_qcaps * + ************************/ + + +/* hwrm_cfa_meter_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_meter_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __attribute__((packed)); + +/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */ +struct hwrm_cfa_meter_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * Enumeration denoting the clock at which the Meter is running with. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. + */ + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf) + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0 + /* 375 MHz */ + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_375MHZ UINT32_C(0x0) + /* 625 MHz */ + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ UINT32_C(0x1) + #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_LAST \ + HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ + uint8_t unused_0[4]; + /* + * The minimum guaranteed number of tx meter profiles supported + * for this function. + */ + uint16_t min_tx_profile; + /* + * The maximum non-guaranteed number of tx meter profiles supported + * for this function. + */ + uint16_t max_tx_profile; + /* + * The minimum guaranteed number of rx meter profiles supported + * for this function. + */ + uint16_t min_rx_profile; + /* + * The maximum non-guaranteed number of rx meter profiles supported + * for this function. + */ + uint16_t max_rx_profile; + /* + * The minimum guaranteed number of tx meter instances supported + * for this function. + */ + uint16_t min_tx_instance; + /* + * The maximum non-guaranteed number of tx meter instances supported + * for this function. + */ + uint16_t max_tx_instance; + /* + * The minimum guaranteed number of rx meter instances supported + * for this function. + */ + uint16_t min_rx_instance; + /* + * The maximum non-guaranteed number of rx meter instances supported + * for this function. + */ + uint16_t max_rx_instance; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + /******************************** * hwrm_cfa_meter_profile_alloc * ********************************/ @@ -24200,11 +25515,11 @@ struct hwrm_cfa_meter_profile_alloc_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \ + /* Raw value */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ - HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW /* A meter burst size specified in bytes. */ uint32_t commit_burst; /* The bandwidth value. */ @@ -24243,7 +25558,7 @@ struct hwrm_cfa_meter_profile_alloc_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ + /* Invalid value */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ @@ -24286,11 +25601,11 @@ struct hwrm_cfa_meter_profile_alloc_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \ + /* Raw unit */ + #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ - HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID + HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW /* A meter burst size specified in bytes. */ uint32_t excess_peak_burst; /* The bandwidth value. */ @@ -24564,11 +25879,11 @@ struct hwrm_cfa_meter_profile_cfg_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \ + /* Raw value */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ - HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID + HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW /* A meter burst size specified in bytes. */ uint32_t commit_burst; /* The bandwidth value. */ @@ -24607,7 +25922,7 @@ struct hwrm_cfa_meter_profile_cfg_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ + /* Invalid value */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ @@ -24650,11 +25965,11 @@ struct hwrm_cfa_meter_profile_cfg_input { /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) - /* Invalid unit */ - #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \ + /* Raw unit */ + #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ - HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID + HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW /* A meter burst size specified in bytes. */ uint32_t excess_peak_burst; /* The bandwidth value. */ @@ -24775,7 +26090,7 @@ struct hwrm_cfa_meter_instance_alloc_input { /* This value identifies a meter profile in CFA. */ uint16_t meter_profile_id; /* - * A value of 0xfff is considered invalid and implies the + * A value of 0xffff is considered invalid and implies the * profile is not configured. */ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \ @@ -24798,7 +26113,7 @@ struct hwrm_cfa_meter_instance_alloc_output { /* This value identifies a meter instance in CFA. */ uint16_t meter_instance_id; /* - * A value of 0xfff is considered invalid and implies the + * A value of 0xffff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \ @@ -24816,13 +26131,13 @@ struct hwrm_cfa_meter_instance_alloc_output { uint8_t valid; } __attribute__((packed)); -/******************************** - * hwrm_cfa_meter_instance_free * - ********************************/ +/******************************* + * hwrm_cfa_meter_instance_cfg * + *******************************/ -/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */ -struct hwrm_cfa_meter_instance_free_input { +/* hwrm_cfa_meter_instance_cfg_input (size:192b/24B) */ +struct hwrm_cfa_meter_instance_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24856,31 +26171,39 @@ struct hwrm_cfa_meter_instance_free_input { * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \ - HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX uint8_t unused_0; - /* This value identifies a meter instance in CFA. */ - uint16_t meter_instance_id; /* - * A value of 0xfff is considered invalid and implies the - * instance is not configured. + * This value identifies a new meter profile to be associated with + * the meter instance specified in this command. */ - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \ + uint16_t meter_profile_id; + /* + * A value of 0xffff is considered invalid and implies the + * profile is not configured. + */ + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID \ UINT32_C(0xffff) - #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \ - HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID - uint8_t unused_1[4]; + #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID + /* + * This value identifies the ID of a meter instance that needs to be updated with + * a new meter profile specified in this command. + */ + uint16_t meter_instance_id; + uint8_t unused_1[2]; } __attribute__((packed)); -/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */ -struct hwrm_cfa_meter_instance_free_output { +/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */ +struct hwrm_cfa_meter_instance_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -24900,13 +26223,13 @@ struct hwrm_cfa_meter_instance_free_output { uint8_t valid; } __attribute__((packed)); -/******************************* - * hwrm_cfa_decap_filter_alloc * - *******************************/ +/******************************** + * hwrm_cfa_meter_instance_free * + ********************************/ -/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */ -struct hwrm_cfa_decap_filter_alloc_input { +/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */ +struct hwrm_cfa_meter_instance_free_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -24934,22 +26257,106 @@ struct hwrm_cfa_decap_filter_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* ovs_tunnel is 1 b */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \ - UINT32_C(0x1) - uint32_t enables; + uint8_t flags; /* - * This bit must be '1' for the tunnel_type field to be - * configured. + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both + * TX and RX paths of the chip. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) + /* tx path */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x0) + /* rx path */ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \ + HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX + uint8_t unused_0; + /* This value identifies a meter instance in CFA. */ + uint16_t meter_instance_id; /* - * This bit must be '1' for the tunnel_id field to be - * configured. + * A value of 0xfff is considered invalid and implies the + * instance is not configured. */ - #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \ + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \ + UINT32_C(0xffff) + #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \ + HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID + uint8_t unused_1[4]; +} __attribute__((packed)); + +/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */ +struct hwrm_cfa_meter_instance_free_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/******************************* + * hwrm_cfa_decap_filter_alloc * + *******************************/ + + +/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */ +struct hwrm_cfa_decap_filter_alloc_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* ovs_tunnel is 1 b */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \ + UINT32_C(0x1) + uint32_t enables; + /* + * This bit must be '1' for the tunnel_type field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ + UINT32_C(0x1) + /* + * This bit must be '1' for the tunnel_id field to be + * configured. + */ + #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \ UINT32_C(0x2) /* * This bit must be '1' for the src_macaddr field to be @@ -25375,6 +26782,9 @@ struct hwrm_cfa_flow_alloc_input { */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \ UINT32_C(0x100) + /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \ + UINT32_C(0x200) /* * Tx Flow: vf fid. * Rx Flow: pf fid. @@ -25430,6 +26840,13 @@ struct hwrm_cfa_flow_alloc_input { /* If set to 1, flow aging is enabled for this flow. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \ UINT32_C(0x800) + /* + * If set to 1 an attempt will be made to try to offload this flow to the + * most optimal flow table resource. If set to 0, the flow will be + * placed to the default flow table resource. + */ + #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \ + UINT32_C(0x1000) /* * Tx Flow: pf or vf fid. * Rx Flow: vf fid. @@ -25569,7 +26986,8 @@ struct hwrm_cfa_flow_alloc_output { uint32_t flow_id; /* This value identifies a set of CFA data structures used for a flow. */ uint64_t ext_flow_handle; - uint8_t unused_1[7]; + uint32_t flow_counter_id; + uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25646,6 +27064,229 @@ struct hwrm_cfa_flow_free_output { uint8_t valid; } __attribute__((packed)); +/* hwrm_cfa_flow_action_data (size:960b/120B) */ +struct hwrm_cfa_flow_action_data { + uint16_t action_flags; + /* Setting of this flag indicates accept action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FWD \ + UINT32_C(0x1) + /* Setting of this flag indicates recycle action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_RECYCLE \ + UINT32_C(0x2) + /* Setting of this flag indicates drop action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DROP \ + UINT32_C(0x4) + /* Setting of this flag indicates meter action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_METER \ + UINT32_C(0x8) + /* Setting of this flag indicates tunnel action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \ + UINT32_C(0x10) + /* + * If set to 1 and flow direction is TX, it indicates decap of L2 header + * and encap of tunnel header. If set to 1 and flow direction is RX, it + * indicates decap of tunnel header and encap L2 header. + */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \ + UINT32_C(0x20) + /* Setting of this flag indicates ttl decrement action. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TTL_DECREMENT \ + UINT32_C(0x40) + /* If set to 1, flow aging is enabled for this flow. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \ + UINT32_C(0x80) + /* Setting of this flag indicates encap action.. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \ + UINT32_C(0x100) + /* Setting of this flag indicates decap action.. */ + #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \ + UINT32_C(0x200) + /* Meter id. */ + uint16_t act_meter_id; + /* VNIC id. */ + uint16_t vnic_id; + /* vport number. */ + uint16_t vport_id; + /* The NAT source/destination. */ + uint16_t nat_port; + uint16_t unused_0[3]; + /* NAT IPv4/IPv6 address. */ + uint32_t nat_ip_address[4]; + /* Encapsulation Type. */ + uint8_t encap_type; + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_NVGRE UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2GRE UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5) + /* Multi-Protocol Lable Switching (MPLS) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6) + /* VLAN */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc) + #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \ + HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 + uint8_t unused[7]; + /* This value is encap data for the associated encap type. */ + uint32_t encap_data[20]; +} __attribute__((packed)); + +/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */ +struct hwrm_cfa_flow_tunnel_hdr_data { + /* Tunnel Type. */ + uint8_t tunnel_type; + /* Non-tunnel */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NONTUNNEL \ + UINT32_C(0x0) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN \ + UINT32_C(0x1) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NVGRE \ + UINT32_C(0x2) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2GRE \ + UINT32_C(0x3) + /* IP in IP */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPIP \ + UINT32_C(0x4) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \ + UINT32_C(0x5) + /* Multi-Protocol Lable Switching (MPLS) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \ + UINT32_C(0x6) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_STT \ + UINT32_C(0x7) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE \ + UINT32_C(0x8) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \ + UINT32_C(0x9) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \ + UINT32_C(0xa) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \ + UINT32_C(0xb) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \ + UINT32_C(0xc) + /* Any tunneled traffic */ + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL \ + UINT32_C(0xff) + #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_LAST \ + HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL + uint8_t unused[3]; + /* + * Tunnel identifier. + * Virtual Network Identifier (VNI). + */ + uint32_t tunnel_id; +} __attribute__((packed)); + +/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */ +struct hwrm_cfa_flow_l4_key_data { + /* The value of source port. */ + uint16_t l4_src_port; + /* The value of destination port. */ + uint16_t l4_dst_port; + uint32_t unused; +} __attribute__((packed)); + +/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */ +struct hwrm_cfa_flow_l3_key_data { + /* The value of ip protocol. */ + uint8_t ip_protocol; + uint8_t unused_0[7]; + /* The value of destination IPv4/IPv6 address. */ + uint32_t ip_dst[4]; + /* The source IPv4/IPv6 address. */ + uint32_t ip_src[4]; + /* NAT IPv4/IPv6 address. */ + uint32_t nat_ip_address[4]; + uint32_t unused[2]; +} __attribute__((packed)); + +/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */ +struct hwrm_cfa_flow_l2_key_data { + /* Destination MAC address. */ + uint16_t dmac[3]; + uint16_t unused_0; + /* Source MAC address. */ + uint16_t smac[3]; + uint16_t unused_1; + /* L2 header re-write Destination MAC address. */ + uint16_t l2_rewrite_dmac[3]; + uint16_t unused_2; + /* L2 header re-write Source MAC address. */ + uint16_t l2_rewrite_smac[3]; + /* Ethertype. */ + uint16_t ethertype; + /* Number of VLAN tags. */ + uint16_t num_vlan_tags; + /* VLAN tpid. */ + uint16_t l2_rewrite_vlan_tpid; + /* VLAN tci. */ + uint16_t l2_rewrite_vlan_tci; + uint8_t unused_3[2]; + /* Outer VLAN TPID. */ + uint16_t ovlan_tpid; + /* Outer VLAN TCI. */ + uint16_t ovlan_tci; + /* Inner VLAN TPID. */ + uint16_t ivlan_tpid; + /* Inner VLAN TCI. */ + uint16_t ivlan_tci; + uint8_t unused[8]; +} __attribute__((packed)); + +/* hwrm_cfa_flow_key_data (size:4160b/520B) */ +struct hwrm_cfa_flow_key_data { + /* Flow associated tunnel L2 header key info. */ + uint32_t t_l2_key_data[14]; + /* Flow associated tunnel L2 header mask info. */ + uint32_t t_l2_key_mask[14]; + /* Flow associated tunnel L3 header key info. */ + uint32_t t_l3_key_data[16]; + /* Flow associated tunnel L3 header mask info. */ + uint32_t t_l3_key_mask[16]; + /* Flow associated tunnel L4 header key info. */ + uint32_t t_l4_key_data[2]; + /* Flow associated tunnel L4 header mask info. */ + uint32_t t_l4_key_mask[2]; + /* Flow associated tunnel header info. */ + uint32_t tunnel_hdr[2]; + /* Flow associated L2 header key info. */ + uint32_t l2_key_data[14]; + /* Flow associated L2 header mask info. */ + uint32_t l2_key_mask[14]; + /* Flow associated L3 header key info. */ + uint32_t l3_key_data[16]; + /* Flow associated L3 header mask info. */ + uint32_t l3_key_mask[16]; + /* Flow associated L4 header key info. */ + uint32_t l4_key_data[2]; + /* Flow associated L4 header mask info. */ + uint32_t l4_key_mask[2]; +} __attribute__((packed)); + /********************** * hwrm_cfa_flow_info * **********************/ @@ -25703,7 +27344,7 @@ struct hwrm_cfa_flow_info_input { uint64_t ext_flow_handle; } __attribute__((packed)); -/* hwrm_cfa_flow_info_output (size:448b/56B) */ +/* hwrm_cfa_flow_info_output (size:5632b/704B) */ struct hwrm_cfa_flow_info_output { /* The specific error status for the command. */ uint16_t error_code; @@ -25713,8 +27354,11 @@ struct hwrm_cfa_flow_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* flags is 8 b */ uint8_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2) /* profile is 8 b */ uint8_t profile; /* src_fid is 16 b */ @@ -25737,7 +27381,12 @@ struct hwrm_cfa_flow_info_output { uint32_t tunnel_handle; /* The flow aging timer for the flow, the unit is 100 milliseconds */ uint16_t flow_timer; - uint8_t unused_0[5]; + uint8_t unused_0[6]; + /* Flow associated L2, L3 and L4 headers info. */ + uint32_t flow_key_data[130]; + /* Flow associated action record info. */ + uint32_t flow_action_info[30]; + uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -25753,7 +27402,7 @@ struct hwrm_cfa_flow_info_output { ***********************/ -/* hwrm_cfa_flow_flush_input (size:192b/24B) */ +/* hwrm_cfa_flow_flush_input (size:256b/32B) */ struct hwrm_cfa_flow_flush_input { /* The HWRM command request type. */ uint16_t req_type; @@ -25782,8 +27431,73 @@ struct hwrm_cfa_flow_flush_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; + /* flags is 32 b */ uint32_t flags; - uint8_t unused_0[4]; + /* + * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr + * fields are valid. The flow flush operation should only flush the flows from the + * flow table specified. This flag is set to 0 by older driver. For older firmware, + * setting this flag has no effect. + */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \ + UINT32_C(0x1) + /* + * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA + * context memory tables..etc. This flag is set to 0 by older driver. For older firmware, + * setting this flag has no effect. + */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \ + UINT32_C(0x2) + /* + * This specifies the size of flow handle entries provided by the driver + * in the flow table specified below. Only two flow handle size enums are defined. + */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \ + UINT32_C(0xc0000000) + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_SFT \ + 30 + /* The flow handle is 16bit */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_16BIT \ + (UINT32_C(0x0) << 30) + /* The flow handle is 64bit */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT \ + (UINT32_C(0x1) << 30) + #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT + /* Specify page size of the flow table memory. */ + uint8_t page_size; + /* The page size is 4K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* The page size is 8K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* The page size is 64K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* The page size is 256K */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* The page size is 1M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* The page size is 2M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* The page size is 4M */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* The page size is 1G */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G + /* FLow table memory indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 + /* number of flows in the flow table */ + uint16_t num_flows; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; } __attribute__((packed)); /* hwrm_cfa_flow_flush_output (size:128b/16B) */ @@ -25983,7 +27697,12 @@ struct hwrm_cfa_flow_aging_timer_reset_input { uint64_t resp_addr; /* Flow record index. */ uint16_t flow_handle; - uint8_t unused_0[6]; + uint8_t unused_0[2]; + /* + * New flow timer value for the flow specified in the ext_flow_handle. + * The flow timer unit is 100ms. + */ + uint32_t flow_timer; /* This value identifies a set of CFA data structures used for a flow. */ uint64_t ext_flow_handle; } __attribute__((packed)); @@ -26244,13 +27963,13 @@ struct hwrm_cfa_flow_aging_qcaps_output { uint8_t valid; } __attribute__((packed)); -/********************** - * hwrm_cfa_pair_info * - **********************/ +/********************************** + * hwrm_cfa_tcp_flag_process_qcfg * + **********************************/ -/* hwrm_cfa_pair_info_input (size:448b/56B) */ -struct hwrm_cfa_pair_info_input { +/* hwrm_cfa_tcp_flag_process_qcfg_input (size:128b/16B) */ +struct hwrm_cfa_tcp_flag_process_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26278,23 +27997,10 @@ struct hwrm_cfa_pair_info_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - uint32_t flags; - /* If this flag is set, lookup by name else lookup by index. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) - /* If this flag is set, lookup by PF id and VF id. */ - #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) - /* Pair table index. */ - uint16_t pair_index; - /* Pair pf index. */ - uint8_t pair_pfid; - /* Pair vf index. */ - uint8_t pair_vfid; - /* Pair name (32 byte string). */ - char pair_name[32]; } __attribute__((packed)); -/* hwrm_cfa_pair_info_output (size:576b/72B) */ -struct hwrm_cfa_pair_info_output { +/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */ +struct hwrm_cfa_tcp_flag_process_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26303,22 +28009,100 @@ struct hwrm_cfa_pair_info_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Pair table index. */ - uint16_t next_pair_index; - /* Pair member a's fid. */ - uint16_t a_fid; - /* Logical host number. */ - uint8_t host_a_index; - /* Logical PF number. */ - uint8_t pf_a_index; - /* Pair member a's Linux logical VF number. */ - uint16_t vf_a_index; - /* Rx CFA code. */ - uint16_t rx_cfa_code_a; - /* Tx CFA action. */ - uint16_t tx_cfa_action_a; - /* Pair member b's fid. */ - uint16_t b_fid; + /* The port 0 RX mirror action record ID. */ + uint16_t rx_ar_id_port0; + /* The port 1 RX mirror action record ID. */ + uint16_t rx_ar_id_port1; + /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */ + uint16_t tx_ar_id_port0; + /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */ + uint16_t tx_ar_id_port1; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/********************** + * hwrm_cfa_pair_info * + **********************/ + + +/* hwrm_cfa_pair_info_input (size:448b/56B) */ +struct hwrm_cfa_pair_info_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* If this flag is set, lookup by name else lookup by index. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) + /* If this flag is set, lookup by PF id and VF id. */ + #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) + /* Pair table index. */ + uint16_t pair_index; + /* Pair pf index. */ + uint8_t pair_pfid; + /* Pair vf index. */ + uint8_t pair_vfid; + /* Pair name (32 byte string). */ + char pair_name[32]; +} __attribute__((packed)); + +/* hwrm_cfa_pair_info_output (size:576b/72B) */ +struct hwrm_cfa_pair_info_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Pair table index. */ + uint16_t next_pair_index; + /* Pair member a's fid. */ + uint16_t a_fid; + /* Logical host number. */ + uint8_t host_a_index; + /* Logical PF number. */ + uint8_t pf_a_index; + /* Pair member a's Linux logical VF number. */ + uint16_t vf_a_index; + /* Rx CFA code. */ + uint16_t rx_cfa_code_a; + /* Tx CFA action. */ + uint16_t tx_cfa_action_a; + /* Pair member b's fid. */ + uint16_t b_fid; /* Logical host number. */ uint8_t host_b_index; /* Logical PF number. */ @@ -26364,13 +28148,645 @@ struct hwrm_cfa_pair_info_output { uint8_t valid; } __attribute__((packed)); -/*************************************** - * hwrm_cfa_redirect_query_tunnel_type * - ***************************************/ +/*************************************** + * hwrm_cfa_redirect_query_tunnel_type * + ***************************************/ + + +/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ +struct hwrm_cfa_redirect_query_tunnel_type_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* The source function id. */ + uint16_t src_fid; + uint8_t unused_0[6]; +} __attribute__((packed)); + +/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */ +struct hwrm_cfa_redirect_query_tunnel_type_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Tunnel Mask. */ + uint32_t tunnel_mask; + /* Non-tunnel */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \ + UINT32_C(0x1) + /* Virtual eXtensible Local Area Network (VXLAN) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \ + UINT32_C(0x2) + /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \ + UINT32_C(0x4) + /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \ + UINT32_C(0x8) + /* IP in IP */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \ + UINT32_C(0x10) + /* Generic Network Virtualization Encapsulation (Geneve) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \ + UINT32_C(0x20) + /* Multi-Protocol Lable Switching (MPLS) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \ + UINT32_C(0x40) + /* Stateless Transport Tunnel (STT) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \ + UINT32_C(0x80) + /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \ + UINT32_C(0x100) + /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \ + UINT32_C(0x200) + /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \ + UINT32_C(0x400) + /* Any tunneled traffic */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \ + UINT32_C(0x800) + /* Use fixed layer 2 ether type of 0xFFFF */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \ + UINT32_C(0x1000) + /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ + #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \ + UINT32_C(0x2000) + uint8_t unused_0[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/************************* + * hwrm_cfa_ctx_mem_rgtr * + *************************/ + + +/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */ +struct hwrm_cfa_ctx_mem_rgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \ + HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G + uint32_t unused_0; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; +} __attribute__((packed)); + +/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_rgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. + */ + uint16_t ctx_id; + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/*************************** + * hwrm_cfa_ctx_mem_unrgtr * + ***************************/ + + +/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */ +struct hwrm_cfa_ctx_mem_unrgtr_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. + */ + uint16_t ctx_id; + uint8_t unused_0[6]; +} __attribute__((packed)); + +/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_unrgtr_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/************************* + * hwrm_cfa_ctx_mem_qctx * + *************************/ + + +/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */ +struct hwrm_cfa_ctx_mem_qctx_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Id/Handle to the recently register context memory. This handle is passed + * to the CFA feature. + */ + uint16_t ctx_id; + uint8_t unused_0[6]; +} __attribute__((packed)); + +/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */ +struct hwrm_cfa_ctx_mem_qctx_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t flags; + /* Counter PBL indirect levels. */ + uint8_t page_level; + /* PBL pointer is physical start address. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0) + /* PBL pointer points to PTE table. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1) + /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 + /* Page size. */ + uint8_t page_size; + /* 4KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0) + /* 8KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1) + /* 64KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4) + /* 256KB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6) + /* 1MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8) + /* 2MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9) + /* 4MB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa) + /* 1GB page size. */ + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12) + #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \ + HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G + uint8_t unused_0[4]; + /* Pointer to the PBL, or PDL depending on number of levels */ + uint64_t page_dir; + uint8_t unused_1[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/************************** + * hwrm_cfa_ctx_mem_qcaps * + **************************/ + + +/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; +} __attribute__((packed)); + +/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */ +struct hwrm_cfa_ctx_mem_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Indicates the maximum number of context memory which can be registered. */ + uint16_t max_entries; + uint8_t unused_0[6]; +} __attribute__((packed)); + +/********************** + * hwrm_cfa_eem_qcaps * + **********************/ + + +/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */ +struct hwrm_cfa_eem_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. + */ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x1) + /* + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x2) + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x4) + uint32_t unused_0; +} __attribute__((packed)); + +/* hwrm_cfa_eem_qcaps_output (size:256b/32B) */ +struct hwrm_cfa_eem_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2) + uint32_t unused_0; + uint32_t supported; + /* + * If set to 1, then EEM KEY0 table is supported using crc32 hash. + * If set to 0 EEM KEY0 table is not supported. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \ + UINT32_C(0x1) + /* + * If set to 1, then EEM KEY1 table is supported using lookup3 hash. + * If set to 0 EEM KEY1 table is not supported. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \ + UINT32_C(0x2) + /* + * If set to 1, then EEM External Record table is supported. + * If set to 0 EEM External Record table is not supported. + * (This table includes action record, EFC pointers, encap pointers) + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \ + UINT32_C(0x4) + /* + * If set to 1, then EEM External Flow Counters table is supported. + * If set to 0 EEM External Flow Counters table is not supported. + */ + #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \ + UINT32_C(0x8) + /* + * The maximum number of entries supported by EEM. When configuring the host memory + * the number of numbers of entries that can supported are - + * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries. + * Any value that are not these values, the FW will round down to the closest support + * number of entries. + */ + uint32_t max_entries_supported; + /* The entry size in bytes of each entry in the KEY0/KEY1 EEM tables. */ + uint16_t key_entry_size; + /* The entry size in bytes of each entry in the RECORD EEM tables. */ + uint16_t record_entry_size; + /* The entry size in bytes of each entry in the EFC EEM tables. */ + uint16_t efc_entry_size; + uint8_t unused_1; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/******************** + * hwrm_cfa_eem_cfg * + ********************/ + + +/* hwrm_cfa_eem_cfg_input (size:320b/40B) */ +struct hwrm_cfa_eem_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When set to 1, indicates the configuration will apply to TX flows + * which are to be offloaded. + * Note if this bit is set then the path_rx bit can't be set. + */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \ + UINT32_C(0x1) + /* + * When set to 1, indicates the configuration will apply to RX flows + * which are to be offloaded. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \ + UINT32_C(0x2) + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \ + UINT32_C(0x4) + uint32_t unused_0; + /* + * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1, + * RECORD, EFC all have the same number of entries and all tables will be configured + * using this value. Current minimum value is 32k. Current maximum value is 128M. + */ + uint32_t num_entries; + uint32_t unused_1; + /* Configured EEM with the given context if for KEY0 table. */ + uint16_t key0_ctx_id; + /* Configured EEM with the given context if for KEY1 table. */ + uint16_t key1_ctx_id; + /* Configured EEM with the given context if for RECORD table. */ + uint16_t record_ctx_id; + /* Configured EEM with the given context if for EFC table. */ + uint16_t efc_ctx_id; +} __attribute__((packed)); + +/* hwrm_cfa_eem_cfg_output (size:128b/16B) */ +struct hwrm_cfa_eem_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/********************* + * hwrm_cfa_eem_qcfg * + *********************/ -/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */ -struct hwrm_cfa_redirect_query_tunnel_type_input { +/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */ +struct hwrm_cfa_eem_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* @@ -26398,13 +28814,16 @@ struct hwrm_cfa_redirect_query_tunnel_type_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* The source function id. */ - uint16_t src_fid; - uint8_t unused_0[6]; + uint32_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2) + uint32_t unused_0; } __attribute__((packed)); -/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */ -struct hwrm_cfa_redirect_query_tunnel_type_output { +/* hwrm_cfa_eem_qcfg_output (size:192b/24B) */ +struct hwrm_cfa_eem_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ @@ -26413,50 +28832,219 @@ struct hwrm_cfa_redirect_query_tunnel_type_output { uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; - /* Tunnel Mask. */ - uint32_t tunnel_mask; - /* Non-tunnel */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \ + uint32_t flags; + /* When set to 1, indicates the configuration is the TX flow. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \ UINT32_C(0x1) - /* Virtual eXtensible Local Area Network (VXLAN) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \ + /* When set to 1, indicates the configuration is the RX flow. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \ UINT32_C(0x2) - /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \ + /* When set to 1, all offloaded flows will be sent to EEM. */ + #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \ UINT32_C(0x4) - /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \ + /* The number of entries the FW has configured for EEM. */ + uint32_t num_entries; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/******************* + * hwrm_cfa_eem_op * + *******************/ + + +/* hwrm_cfa_eem_op_input (size:192b/24B) */ +struct hwrm_cfa_eem_op_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t flags; + /* + * When set to 1, indicates the host memory which is passed will be + * used for the TX flow offload function specified in fid. + * Note if this bit is set then the path_rx bit can't be set. + */ + #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1) + /* + * When set to 1, indicates the host memory which is passed will be + * used for the RX flow offload function specified in fid. + * Note if this bit is set then the path_tx bit can't be set. + */ + #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2) + uint16_t unused_0; + /* The number of EEM key table entries to be configured. */ + uint16_t op; + /* This value is reserved and should not be used. */ + #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0) + /* + * To properly stop EEM and ensure there are no DMA's, the caller + * must disable EEM for the given PF, using this call. This will + * safely disable EEM and ensure that all DMA'ed to the + * keys/records/efc have been completed. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1) + /* + * Once the EEM host memory has been configured, EEM options have + * been configured. Then the caller should enable EEM for the given + * PF. Note once this call has been made, then the EEM mechanism + * will be active and DMA's will occur as packets are processed. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2) + /* + * Clear EEM settings for the given PF so that the register values + * are reset back to there initial state. + */ + #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3) + #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \ + HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP +} __attribute__((packed)); + +/* hwrm_cfa_eem_op_output (size:128b/16B) */ +struct hwrm_cfa_eem_op_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/******************************** + * hwrm_cfa_adv_flow_mgnt_qcaps * + ********************************/ + + +/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */ +struct hwrm_cfa_adv_flow_mgnt_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t unused_0[4]; +} __attribute__((packed)); + +/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */ +struct hwrm_cfa_adv_flow_mgnt_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint32_t flags; + /* + * Value of 1 to indicate firmware support 16-bit flow handle. + * Value of 0 to indicate firmware not support 16-bit flow handle. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \ + UINT32_C(0x1) + /* + * Value of 1 to indicate firmware support 64-bit flow handle. + * Value of 0 to indicate firmware not support 64-bit flow handle. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \ + UINT32_C(0x2) + /* + * Value of 1 to indicate firmware support flow batch delete operation through + * HWRM_CFA_FLOW_FLUSH command. + * Value of 0 to indicate that the firmware does not support flow batch delete + * operation. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \ + UINT32_C(0x4) + /* + * Value of 1 to indicate that the firmware support flow reset all operation through + * HWRM_CFA_FLOW_FLUSH command. + * Value of 0 indicates firmware does not support flow reset all operation. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \ UINT32_C(0x8) - /* IP in IP */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \ + /* + * Value of 1 to indicate that firmware supports use of FID as dest_id in + * HWRM_CFA_NTUPLE_ALLOC/CFG commands. + * Value of 0 indicates firmware does not support use of FID as dest_id. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \ UINT32_C(0x10) - /* Generic Network Virtualization Encapsulation (Geneve) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \ + /* + * Value of 1 to indicate that firmware supports TX EEM flows. + * Value of 0 indicates firmware does not support TX EEM flows. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \ UINT32_C(0x20) - /* Multi-Protocol Lable Switching (MPLS) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \ + /* + * Value of 1 to indicate that firmware supports RX EEM flows. + * Value of 0 indicates firmware does not support RX EEM flows. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \ UINT32_C(0x40) - /* Stateless Transport Tunnel (STT) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \ - UINT32_C(0x80) - /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \ - UINT32_C(0x100) - /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \ - UINT32_C(0x200) - /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \ - UINT32_C(0x400) - /* Any tunneled traffic */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \ - UINT32_C(0x800) - /* Use fixed layer 2 ether type of 0xFFFF */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \ - UINT32_C(0x1000) - /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */ - #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \ - UINT32_C(0x2000) uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output @@ -26874,7 +29462,11 @@ struct hwrm_stat_ctx_alloc_input { * point to a physically contiguous block of memory. */ uint64_t resp_addr; - /* This is the address for statistic block. */ + /* + * This is the address for statistic block. + * > For new versions of the chip, this address should be 128B + * > aligned. + */ uint64_t stats_dma_addr; /* * The statistic block update period in ms. -- 2.20.1