From 31c79ec582f3ed1e1a48b36db0d052cc366c527e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Mon, 20 Jul 2015 23:01:37 +0530 Subject: [PATCH] cxgbe: update doc for FreeBSD support Update cxgbe documentation to include support for FreeBSD: 1. Add instructions on how to compile CXGBE PMD in FreeBSD. 2. Add instructions on how to flash firmware image on Chelsio T5 cards in FreeBSD. 3. Add sample application usage for FreeBSD. 4. Add an extra step to reload kernel module in Linux in order for the new firmware to be loaded. 5. Typo fixes. Signed-off-by: Rahul Lakkireddy Signed-off-by: Kumar Sanghvi Acked-by: Bruce Richardson --- doc/guides/nics/cxgbe.rst | 280 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 267 insertions(+), 13 deletions(-) diff --git a/doc/guides/nics/cxgbe.rst b/doc/guides/nics/cxgbe.rst index 7557db07b6..148cd25587 100644 --- a/doc/guides/nics/cxgbe.rst +++ b/doc/guides/nics/cxgbe.rst @@ -32,7 +32,8 @@ CXGBE Poll Mode Driver ====================== The CXGBE PMD (**librte_pmd_cxgbe**) provides poll mode driver support -for **Chelsio T5** 10/40 Gbps family of adapters. +for **Chelsio T5** 10/40 Gbps family of adapters. CXGBE PMD has support +for the latest Linux and FreeBSD operating systems. More information can be found at `Chelsio Communications Official Website `_. @@ -73,10 +74,20 @@ Prerequisites - Requires firmware version **1.13.32.0** and higher. Visit `Chelsio Download Center `_ to get latest firmware - bundled with the latest Chelsio Unified Wire package. Installing and loading - the latest cxgb4 kernel driver from the Chelsio Unified Wire package should - get you the latest firmware. More information can be obtained from the User - Guide that is bundled with the Chelsio Unified Wire package. + bundled with the latest Chelsio Unified Wire package. + + For Linux, installing and loading the latest cxgb4 kernel driver from the + Chelsio Unified Wire package should get you the latest firmware. More + information can be obtained from the User Guide that is bundled with the + Chelsio Unified Wire package. + + For FreeBSD, the latest firmware obtained from the Chelsio Unified Wire + package must be manually flashed via cxgbetool available in FreeBSD source + repository. + + Instructions on how to manually flash the firmware are given in section + :ref:`linux-installation` for Linux and section :ref:`freebsd-installation` + for FreeBSD. Pre-Installation Configuration ------------------------------ @@ -111,6 +122,8 @@ enabling debugging options may affect system performance. Toggle display of receiving data path run-time check messages. +.. _driver-compilation: + Driver Compilation ~~~~~~~~~~~~~~~~~~ @@ -122,11 +135,24 @@ command: cd make config T=x86_64-native-linuxapp-gcc install -Installation ------------- +To compile CXGBE PMD for FreeBSD x86_64 clang target, run the following "gmake" +command: -Steps to manually install the latest firmware from the downloaded source files -are as follows: +.. code-block:: console + + cd + gmake config T=x86_64-native-bsdapp-clang install + +Linux +----- + +.. _linux-installation: + +Linux Installation +~~~~~~~~~~~~~~~~~~ + +Steps to manually install the latest firmware from the downloaded Chelsio +Unified Wire package for Linux operating system are as follows: #. Load the kernel module: @@ -166,6 +192,13 @@ are as follows: cxgbtool p1p1 loadfw /src/network/firmware/t5fw-*.bin +#. Unload and reload the kernel module: + + .. code-block:: console + + modprobe -r cxgb4 + modprobe cxgb4 + #. Verify with ethtool: .. code-block:: console @@ -179,10 +212,17 @@ are as follows: firmware-version: 1.13.32.0, TP 0.1.4.8 Sample Application Notes -------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~ This section demonstrates how to launch **testpmd** with Chelsio T5 -devices managed by librte_pmd_cxgbe. +devices managed by librte_pmd_cxgbe in Linux operating system. + +#. Change to DPDK source directory where the target has been compiled in + section :ref:`driver-compilation`: + + .. code-block:: console + + cd #. Load the kernel module: @@ -253,7 +293,7 @@ devices managed by librte_pmd_cxgbe. .. note:: - CXGBE PMD currently only supports the binding of PF4 for Chelsio T5 NICs. + Currently, CXGBE PMD only supports the binding of PF4 for Chelsio T5 NICs. #. Start testpmd with basic parameters: @@ -271,7 +311,221 @@ devices managed by librte_pmd_cxgbe. EAL: PCI memory mapped at 0x7fd7c0200000 EAL: PCI memory mapped at 0x7fd77cdfd000 EAL: PCI memory mapped at 0x7fd7c10b7000 - PMD: rte_cxgbe_pmd: fw: 1.13.33.0, TP: 0.1.4.8 + PMD: rte_cxgbe_pmd: fw: 1.13.32.0, TP: 0.1.4.8 + PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter + Interactive-mode selected + Configuring Port 0 (socket 0) + Port 0: 00:07:43:2D:EA:C0 + Configuring Port 1 (socket 0) + Port 1: 00:07:43:2D:EA:C8 + Checking link statuses... + PMD: rte_cxgbe_pmd: Port0: passive DA port module inserted + PMD: rte_cxgbe_pmd: Port1: passive DA port module inserted + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> + +.. note:: + + Flow control pause TX/RX is disabled by default and can be enabled via + testpmd as follows: + + .. code-block:: console + + testpmd> set flow_ctrl rx on tx on 0 0 0 0 mac_ctrl_frame_fwd off autoneg on 0 + testpmd> set flow_ctrl rx on tx on 0 0 0 0 mac_ctrl_frame_fwd off autoneg on 1 + + To disable again, use: + + .. code-block:: console + + testpmd> set flow_ctrl rx off tx off 0 0 0 0 mac_ctrl_frame_fwd off autoneg off 0 + testpmd> set flow_ctrl rx off tx off 0 0 0 0 mac_ctrl_frame_fwd off autoneg off 1 + +FreeBSD +------- + +.. _freebsd-installation: + +FreeBSD Installation +~~~~~~~~~~~~~~~~~~~~ + +Steps to manually install the latest firmware from the downloaded Chelsio +Unified Wire package for FreeBSD operating system are as follows: + +#. Load the kernel module: + + .. code-block:: console + + kldload if_cxgbe + +#. Use dmesg to get the t5nex instance assigned to the Chelsio card: + + .. code-block:: console + + dmesg | grep "t5nex" + + Example output: + + .. code-block:: console + + t5nex0: irq 16 at device 0.4 on pci2 + cxl0: on t5nex0 + cxl1: on t5nex0 + t5nex0: PCIe x8, 2 ports, 14 MSI-X interrupts, 31 eq, 13 iq + + In the example above, a Chelsio T520-CR card is bound to a t5nex0 instance. + +#. Install cxgbetool from FreeBSD source repository: + + .. code-block:: console + + cd /tools/tools/cxgbetool/ + make && make install + +#. Use cxgbetool to load the firmware image onto the card: + + .. code-block:: console + + cxgbetool t5nex0 loadfw /src/network/firmware/t5fw-*.bin + +#. Unload and reload the kernel module: + + .. code-block:: console + + kldunload if_cxgbe + kldload if_cxgbe + +#. Verify with sysctl: + + .. code-block:: console + + sysctl -a | grep "t5nex" | grep "firmware" + + Example output: + + .. code-block:: console + + dev.t5nex.0.firmware_version: 1.13.32.0 + +Sample Application Notes +~~~~~~~~~~~~~~~~~~~~~~~~ + +This section demonstrates how to launch **testpmd** with Chelsio T5 +devices managed by librte_pmd_cxgbe in FreeBSD operating system. + +#. Change to DPDK source directory where the target has been compiled in + section :ref:`driver-compilation`: + + .. code-block:: console + + cd + +#. Copy the contigmem kernel module to /boot/kernel directory: + + .. code-block:: console + + cp x86_64-native-bsdapp-clang/kmod/contigmem.ko /boot/kernel/ + +#. Add the following lines to /boot/loader.conf: + + .. code-block:: console + + # reserve 2 x 1G blocks of contiguous memory using contigmem driver + hw.contigmem.num_buffers=2 + hw.contigmem.buffer_size=1073741824 + # load contigmem module during boot process + contigmem_load="YES" + + The above lines load the contigmem kernel module during boot process and + allocate 2 x 1G blocks of contiguous memory to be used for DPDK later on. + This is to avoid issues with potential memory fragmentation during later + system up time, which may result in failure of allocating the contiguous + memory required for the contigmem kernel module. + +#. Restart the system and ensure the contigmem module is loaded successfully: + + .. code-block:: console + + reboot + kldstat | grep "contigmem" + + Example output: + + .. code-block:: console + + 2 1 0xffffffff817f1000 3118 contigmem.ko + +#. Repeat step 1 to ensure that you are in the DPDK source directory. + +#. Load the cxgbe kernel module: + + .. code-block:: console + + kldload if_cxgbe + +#. Get the PCI bus addresses of the interfaces bound to t5nex driver: + + .. code-block:: console + + pciconf -l | grep "t5nex" + + Example output: + + .. code-block:: console + + t5nex0@pci0:2:0:4: class=0x020000 card=0x00001425 chip=0x54011425 rev=0x00 + + In the above example, the t5nex0 is bound to 2:0:4 bus address. + + .. note:: + + Both the interfaces of a Chelsio T5 2-port adapter are bound to the + same PCI bus address. + +#. Unload the kernel module: + + .. code-block:: console + + kldunload if_cxgbe + +#. Set the PCI bus addresses to hw.nic_uio.bdfs kernel environment parameter: + + .. code-block:: console + + kenv hw.nic_uio.bdfs="2:0:4" + + This automatically binds 2:0:4 to nic_uio kernel driver when it is loaded in + the next step. + + .. note:: + + Currently, CXGBE PMD only supports the binding of PF4 for Chelsio T5 NICs. + +#. Load nic_uio kernel driver: + + .. code-block:: console + + kldload ./x86_64-native-bsdapp-clang/kmod/nic_uio.ko + +#. Start testpmd with basic parameters: + + .. code-block:: console + + ./x86_64-native-bsdapp-clang/app/testpmd -c 0xf -n 4 -w 0000:02:00.4 -- -i + + Example output: + + .. code-block:: console + + [...] + EAL: PCI device 0000:02:00.4 on NUMA socket 0 + EAL: probe driver: 1425:5401 rte_cxgbe_pmd + EAL: PCI memory mapped at 0x8007ec000 + EAL: PCI memory mapped at 0x842800000 + EAL: PCI memory mapped at 0x80086c000 + PMD: rte_cxgbe_pmd: fw: 1.13.32.0, TP: 0.1.4.8 PMD: rte_cxgbe_pmd: Coming up as MASTER: Initializing adapter Interactive-mode selected Configuring Port 0 (socket 0) -- 2.20.1