From 4d73b6fb9907f387b6de1a8fdeecab10a51fcb23 Mon Sep 17 00:00:00 2001 From: Adrien Mazarguil Date: Wed, 21 Dec 2016 15:51:18 +0100 Subject: [PATCH] doc: add generic flow API guide Signed-off-by: Adrien Mazarguil Acked-by: Olga Shern Acked-by: John McNamara --- doc/guides/prog_guide/index.rst | 1 + doc/guides/prog_guide/rte_flow.rst | 2041 ++++++++++++++++++++++++++++ 2 files changed, 2042 insertions(+) create mode 100644 doc/guides/prog_guide/rte_flow.rst diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst index e5a50a8823..ed7f770eb4 100644 --- a/doc/guides/prog_guide/index.rst +++ b/doc/guides/prog_guide/index.rst @@ -42,6 +42,7 @@ Programmer's Guide mempool_lib mbuf_lib poll_mode_drv + rte_flow cryptodev_lib link_bonding_poll_mode_drv_lib timer_lib diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst new file mode 100644 index 0000000000..f415a73ded --- /dev/null +++ b/doc/guides/prog_guide/rte_flow.rst @@ -0,0 +1,2041 @@ +.. BSD LICENSE + Copyright 2016 6WIND S.A. + Copyright 2016 Mellanox. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of 6WIND S.A. nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.. _Generic_flow_API: + +Generic flow API (rte_flow) +=========================== + +Overview +-------- + +This API provides a generic means to configure hardware to match specific +ingress or egress traffic, alter its fate and query related counters +according to any number of user-defined rules. + +It is named *rte_flow* after the prefix used for all its symbols, and is +defined in ``rte_flow.h``. + +- Matching can be performed on packet data (protocol headers, payload) and + properties (e.g. associated physical port, virtual device function ID). + +- Possible operations include dropping traffic, diverting it to specific + queues, to virtual/physical device functions or ports, performing tunnel + offloads, adding marks and so on. + +It is slightly higher-level than the legacy filtering framework which it +encompasses and supersedes (including all functions and filter types) in +order to expose a single interface with an unambiguous behavior that is +common to all poll-mode drivers (PMDs). + +Several methods to migrate existing applications are described in `API +migration`_. + +Flow rule +--------- + +Description +~~~~~~~~~~~ + +A flow rule is the combination of attributes with a matching pattern and a +list of actions. Flow rules form the basis of this API. + +Flow rules can have several distinct actions (such as counting, +encapsulating, decapsulating before redirecting packets to a particular +queue, etc.), instead of relying on several rules to achieve this and having +applications deal with hardware implementation details regarding their +order. + +Support for different priority levels on a rule basis is provided, for +example in order to force a more specific rule to come before a more generic +one for packets matched by both. However hardware support for more than a +single priority level cannot be guaranteed. When supported, the number of +available priority levels is usually low, which is why they can also be +implemented in software by PMDs (e.g. missing priority levels may be +emulated by reordering rules). + +In order to remain as hardware-agnostic as possible, by default all rules +are considered to have the same priority, which means that the order between +overlapping rules (when a packet is matched by several filters) is +undefined. + +PMDs may refuse to create overlapping rules at a given priority level when +they can be detected (e.g. if a pattern matches an existing filter). + +Thus predictable results for a given priority level can only be achieved +with non-overlapping rules, using perfect matching on all protocol layers. + +Flow rules can also be grouped, the flow rule priority is specific to the +group they belong to. All flow rules in a given group are thus processed +either before or after another group. + +Support for multiple actions per rule may be implemented internally on top +of non-default hardware priorities, as a result both features may not be +simultaneously available to applications. + +Considering that allowed pattern/actions combinations cannot be known in +advance and would result in an impractically large number of capabilities to +expose, a method is provided to validate a given rule from the current +device configuration state. + +This enables applications to check if the rule types they need is supported +at initialization time, before starting their data path. This method can be +used anytime, its only requirement being that the resources needed by a rule +should exist (e.g. a target RX queue should be configured first). + +Each defined rule is associated with an opaque handle managed by the PMD, +applications are responsible for keeping it. These can be used for queries +and rules management, such as retrieving counters or other data and +destroying them. + +To avoid resource leaks on the PMD side, handles must be explicitly +destroyed by the application before releasing associated resources such as +queues and ports. + +The following sections cover: + +- **Attributes** (represented by ``struct rte_flow_attr``): properties of a + flow rule such as its direction (ingress or egress) and priority. + +- **Pattern item** (represented by ``struct rte_flow_item``): part of a + matching pattern that either matches specific packet data or traffic + properties. It can also describe properties of the pattern itself, such as + inverted matching. + +- **Matching pattern**: traffic properties to look for, a combination of any + number of items. + +- **Actions** (represented by ``struct rte_flow_action``): operations to + perform whenever a packet is matched by a pattern. + +Attributes +~~~~~~~~~~ + +Attribute: Group +^^^^^^^^^^^^^^^^ + +Flow rules can be grouped by assigning them a common group number. Lower +values have higher priority. Group 0 has the highest priority. + +Although optional, applications are encouraged to group similar rules as +much as possible to fully take advantage of hardware capabilities +(e.g. optimized matching) and work around limitations (e.g. a single pattern +type possibly allowed in a given group). + +Note that support for more than a single group is not guaranteed. + +Attribute: Priority +^^^^^^^^^^^^^^^^^^^ + +A priority level can be assigned to a flow rule. Like groups, lower values +denote higher priority, with 0 as the maximum. + +A rule with priority 0 in group 8 is always matched after a rule with +priority 8 in group 0. + +Group and priority levels are arbitrary and up to the application, they do +not need to be contiguous nor start from 0, however the maximum number +varies between devices and may be affected by existing flow rules. + +If a packet is matched by several rules of a given group for a given +priority level, the outcome is undefined. It can take any path, may be +duplicated or even cause unrecoverable errors. + +Note that support for more than a single priority level is not guaranteed. + +Attribute: Traffic direction +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Flow rules can apply to inbound and/or outbound traffic (ingress/egress). + +Several pattern items and actions are valid and can be used in both +directions. At least one direction must be specified. + +Specifying both directions at once for a given rule is not recommended but +may be valid in a few cases (e.g. shared counters). + +Pattern item +~~~~~~~~~~~~ + +Pattern items fall in two categories: + +- Matching protocol headers and packet data (ANY, RAW, ETH, VLAN, IPV4, + IPV6, ICMP, UDP, TCP, SCTP, VXLAN and so on), usually associated with a + specification structure. + +- Matching meta-data or affecting pattern processing (END, VOID, INVERT, PF, + VF, PORT and so on), often without a specification structure. + +Item specification structures are used to match specific values among +protocol fields (or item properties). Documentation describes for each item +whether they are associated with one and their type name if so. + +Up to three structures of the same type can be set for a given item: + +- ``spec``: values to match (e.g. a given IPv4 address). + +- ``last``: upper bound for an inclusive range with corresponding fields in + ``spec``. + +- ``mask``: bit-mask applied to both ``spec`` and ``last`` whose purpose is + to distinguish the values to take into account and/or partially mask them + out (e.g. in order to match an IPv4 address prefix). + +Usage restrictions and expected behavior: + +- Setting either ``mask`` or ``last`` without ``spec`` is an error. + +- Field values in ``last`` which are either 0 or equal to the corresponding + values in ``spec`` are ignored; they do not generate a range. Nonzero + values lower than those in ``spec`` are not supported. + +- Setting ``spec`` and optionally ``last`` without ``mask`` causes the PMD + to only take the fields it can recognize into account. There is no error + checking for unsupported fields. + +- Not setting any of them (assuming item type allows it) uses default + parameters that depend on the item type. Most of the time, particularly + for protocol header items, it is equivalent to providing an empty (zeroed) + ``mask``. + +- ``mask`` is a simple bit-mask applied before interpreting the contents of + ``spec`` and ``last``, which may yield unexpected results if not used + carefully. For example, if for an IPv4 address field, ``spec`` provides + *10.1.2.3*, ``last`` provides *10.3.4.5* and ``mask`` provides + *255.255.0.0*, the effective range becomes *10.1.0.0* to *10.3.255.255*. + +Example of an item specification matching an Ethernet header: + +.. _table_rte_flow_pattern_item_example: + +.. table:: Ethernet item + + +----------+----------+--------------------+ + | Field | Subfield | Value | + +==========+==========+====================+ + | ``spec`` | ``src`` | ``00:01:02:03:04`` | + | +----------+--------------------+ + | | ``dst`` | ``00:2a:66:00:01`` | + | +----------+--------------------+ + | | ``type`` | ``0x22aa`` | + +----------+----------+--------------------+ + | ``last`` | unspecified | + +----------+----------+--------------------+ + | ``mask`` | ``src`` | ``00:ff:ff:ff:00`` | + | +----------+--------------------+ + | | ``dst`` | ``00:00:00:00:ff`` | + | +----------+--------------------+ + | | ``type`` | ``0x0000`` | + +----------+----------+--------------------+ + +Non-masked bits stand for any value (shown as ``?`` below), Ethernet headers +with the following properties are thus matched: + +- ``src``: ``??:01:02:03:??`` +- ``dst``: ``??:??:??:??:01`` +- ``type``: ``0x????`` + +Matching pattern +~~~~~~~~~~~~~~~~ + +A pattern is formed by stacking items starting from the lowest protocol +layer to match. This stacking restriction does not apply to meta items which +can be placed anywhere in the stack without affecting the meaning of the +resulting pattern. + +Patterns are terminated by END items. + +Examples: + +.. _table_rte_flow_tcpv4_as_l4: + +.. table:: TCPv4 as L4 + + +-------+----------+ + | Index | Item | + +=======+==========+ + | 0 | Ethernet | + +-------+----------+ + | 1 | IPv4 | + +-------+----------+ + | 2 | TCP | + +-------+----------+ + | 3 | END | + +-------+----------+ + +| + +.. _table_rte_flow_tcpv6_in_vxlan: + +.. table:: TCPv6 in VXLAN + + +-------+------------+ + | Index | Item | + +=======+============+ + | 0 | Ethernet | + +-------+------------+ + | 1 | IPv4 | + +-------+------------+ + | 2 | UDP | + +-------+------------+ + | 3 | VXLAN | + +-------+------------+ + | 4 | Ethernet | + +-------+------------+ + | 5 | IPv6 | + +-------+------------+ + | 6 | TCP | + +-------+------------+ + | 7 | END | + +-------+------------+ + +| + +.. _table_rte_flow_tcpv4_as_l4_meta: + +.. table:: TCPv4 as L4 with meta items + + +-------+----------+ + | Index | Item | + +=======+==========+ + | 0 | VOID | + +-------+----------+ + | 1 | Ethernet | + +-------+----------+ + | 2 | VOID | + +-------+----------+ + | 3 | IPv4 | + +-------+----------+ + | 4 | TCP | + +-------+----------+ + | 5 | VOID | + +-------+----------+ + | 6 | VOID | + +-------+----------+ + | 7 | END | + +-------+----------+ + +The above example shows how meta items do not affect packet data matching +items, as long as those remain stacked properly. The resulting matching +pattern is identical to "TCPv4 as L4". + +.. _table_rte_flow_udpv6_anywhere: + +.. table:: UDPv6 anywhere + + +-------+------+ + | Index | Item | + +=======+======+ + | 0 | IPv6 | + +-------+------+ + | 1 | UDP | + +-------+------+ + | 2 | END | + +-------+------+ + +If supported by the PMD, omitting one or several protocol layers at the +bottom of the stack as in the above example (missing an Ethernet +specification) enables looking up anywhere in packets. + +It is unspecified whether the payload of supported encapsulations +(e.g. VXLAN payload) is matched by such a pattern, which may apply to inner, +outer or both packets. + +.. _table_rte_flow_invalid_l3: + +.. table:: Invalid, missing L3 + + +-------+----------+ + | Index | Item | + +=======+==========+ + | 0 | Ethernet | + +-------+----------+ + | 1 | UDP | + +-------+----------+ + | 2 | END | + +-------+----------+ + +The above pattern is invalid due to a missing L3 specification between L2 +(Ethernet) and L4 (UDP). Doing so is only allowed at the bottom and at the +top of the stack. + +Meta item types +~~~~~~~~~~~~~~~ + +They match meta-data or affect pattern processing instead of matching packet +data directly, most of them do not need a specification structure. This +particularity allows them to be specified anywhere in the stack without +causing any side effect. + +Item: ``END`` +^^^^^^^^^^^^^ + +End marker for item lists. Prevents further processing of items, thereby +ending the pattern. + +- Its numeric value is 0 for convenience. +- PMD support is mandatory. +- ``spec``, ``last`` and ``mask`` are ignored. + +.. _table_rte_flow_item_end: + +.. table:: END + + +----------+---------+ + | Field | Value | + +==========+=========+ + | ``spec`` | ignored | + +----------+---------+ + | ``last`` | ignored | + +----------+---------+ + | ``mask`` | ignored | + +----------+---------+ + +Item: ``VOID`` +^^^^^^^^^^^^^^ + +Used as a placeholder for convenience. It is ignored and simply discarded by +PMDs. + +- PMD support is mandatory. +- ``spec``, ``last`` and ``mask`` are ignored. + +.. _table_rte_flow_item_void: + +.. table:: VOID + + +----------+---------+ + | Field | Value | + +==========+=========+ + | ``spec`` | ignored | + +----------+---------+ + | ``last`` | ignored | + +----------+---------+ + | ``mask`` | ignored | + +----------+---------+ + +One usage example for this type is generating rules that share a common +prefix quickly without reallocating memory, only by updating item types: + +.. _table_rte_flow_item_void_example: + +.. table:: TCP, UDP or ICMP as L4 + + +-------+--------------------+ + | Index | Item | + +=======+====================+ + | 0 | Ethernet | + +-------+--------------------+ + | 1 | IPv4 | + +-------+------+------+------+ + | 2 | UDP | VOID | VOID | + +-------+------+------+------+ + | 3 | VOID | TCP | VOID | + +-------+------+------+------+ + | 4 | VOID | VOID | ICMP | + +-------+------+------+------+ + | 5 | END | + +-------+--------------------+ + +Item: ``INVERT`` +^^^^^^^^^^^^^^^^ + +Inverted matching, i.e. process packets that do not match the pattern. + +- ``spec``, ``last`` and ``mask`` are ignored. + +.. _table_rte_flow_item_invert: + +.. table:: INVERT + + +----------+---------+ + | Field | Value | + +==========+=========+ + | ``spec`` | ignored | + +----------+---------+ + | ``last`` | ignored | + +----------+---------+ + | ``mask`` | ignored | + +----------+---------+ + +Usage example, matching non-TCPv4 packets only: + +.. _table_rte_flow_item_invert_example: + +.. table:: Anything but TCPv4 + + +-------+----------+ + | Index | Item | + +=======+==========+ + | 0 | INVERT | + +-------+----------+ + | 1 | Ethernet | + +-------+----------+ + | 2 | IPv4 | + +-------+----------+ + | 3 | TCP | + +-------+----------+ + | 4 | END | + +-------+----------+ + +Item: ``PF`` +^^^^^^^^^^^^ + +Matches packets addressed to the physical function of the device. + +If the underlying device function differs from the one that would normally +receive the matched traffic, specifying this item prevents it from reaching +that device unless the flow rule contains a `Action: PF`_. Packets are not +duplicated between device instances by default. + +- Likely to return an error or never match any traffic if applied to a VF + device. +- Can be combined with any number of `Item: VF`_ to match both PF and VF + traffic. +- ``spec``, ``last`` and ``mask`` must not be set. + +.. _table_rte_flow_item_pf: + +.. table:: PF + + +----------+-------+ + | Field | Value | + +==========+=======+ + | ``spec`` | unset | + +----------+-------+ + | ``last`` | unset | + +----------+-------+ + | ``mask`` | unset | + +----------+-------+ + +Item: ``VF`` +^^^^^^^^^^^^ + +Matches packets addressed to a virtual function ID of the device. + +If the underlying device function differs from the one that would normally +receive the matched traffic, specifying this item prevents it from reaching +that device unless the flow rule contains a `Action: VF`_. Packets are not +duplicated between device instances by default. + +- Likely to return an error or never match any traffic if this causes a VF + device to match traffic addressed to a different VF. +- Can be specified multiple times to match traffic addressed to several VF + IDs. +- Can be combined with a PF item to match both PF and VF traffic. + +.. _table_rte_flow_item_vf: + +.. table:: VF + + +----------+----------+---------------------------+ + | Field | Subfield | Value | + +==========+==========+===========================+ + | ``spec`` | ``id`` | destination VF ID | + +----------+----------+---------------------------+ + | ``last`` | ``id`` | upper range value | + +----------+----------+---------------------------+ + | ``mask`` | ``id`` | zeroed to match any VF ID | + +----------+----------+---------------------------+ + +Item: ``PORT`` +^^^^^^^^^^^^^^ + +Matches packets coming from the specified physical port of the underlying +device. + +The first PORT item overrides the physical port normally associated with the +specified DPDK input port (port_id). This item can be provided several times +to match additional physical ports. + +Note that physical ports are not necessarily tied to DPDK input ports +(port_id) when those are not under DPDK control. Possible values are +specific to each device, they are not necessarily indexed from zero and may +not be contiguous. + +As a device property, the list of allowed values as well as the value +associated with a port_id should be retrieved by other means. + +.. _table_rte_flow_item_port: + +.. table:: PORT + + +----------+-----------+--------------------------------+ + | Field | Subfield | Value | + +==========+===========+================================+ + | ``spec`` | ``index`` | physical port index | + +----------+-----------+--------------------------------+ + | ``last`` | ``index`` | upper range value | + +----------+-----------+--------------------------------+ + | ``mask`` | ``index`` | zeroed to match any port index | + +----------+-----------+--------------------------------+ + +Data matching item types +~~~~~~~~~~~~~~~~~~~~~~~~ + +Most of these are basically protocol header definitions with associated +bit-masks. They must be specified (stacked) from lowest to highest protocol +layer to form a matching pattern. + +The following list is not exhaustive, new protocols will be added in the +future. + +Item: ``ANY`` +^^^^^^^^^^^^^ + +Matches any protocol in place of the current layer, a single ANY may also +stand for several protocol layers. + +This is usually specified as the first pattern item when looking for a +protocol anywhere in a packet. + +.. _table_rte_flow_item_any: + +.. table:: ANY + + +----------+----------+--------------------------------------+ + | Field | Subfield | Value | + +==========+==========+======================================+ + | ``spec`` | ``num`` | number of layers covered | + +----------+----------+--------------------------------------+ + | ``last`` | ``num`` | upper range value | + +----------+----------+--------------------------------------+ + | ``mask`` | ``num`` | zeroed to cover any number of layers | + +----------+----------+--------------------------------------+ + +Example for VXLAN TCP payload matching regardless of outer L3 (IPv4 or IPv6) +and L4 (UDP) both matched by the first ANY specification, and inner L3 (IPv4 +or IPv6) matched by the second ANY specification: + +.. _table_rte_flow_item_any_example: + +.. table:: TCP in VXLAN with wildcards + + +-------+------+----------+----------+-------+ + | Index | Item | Field | Subfield | Value | + +=======+======+==========+==========+=======+ + | 0 | Ethernet | + +-------+------+----------+----------+-------+ + | 1 | ANY | ``spec`` | ``num`` | 2 | + +-------+------+----------+----------+-------+ + | 2 | VXLAN | + +-------+------------------------------------+ + | 3 | Ethernet | + +-------+------+----------+----------+-------+ + | 4 | ANY | ``spec`` | ``num`` | 1 | + +-------+------+----------+----------+-------+ + | 5 | TCP | + +-------+------------------------------------+ + | 6 | END | + +-------+------------------------------------+ + +Item: ``RAW`` +^^^^^^^^^^^^^ + +Matches a byte string of a given length at a given offset. + +Offset is either absolute (using the start of the packet) or relative to the +end of the previous matched item in the stack, in which case negative values +are allowed. + +If search is enabled, offset is used as the starting point. The search area +can be delimited by setting limit to a nonzero value, which is the maximum +number of bytes after offset where the pattern may start. + +Matching a zero-length pattern is allowed, doing so resets the relative +offset for subsequent items. + +- This type does not support ranges (``last`` field). + +.. _table_rte_flow_item_raw: + +.. table:: RAW + + +----------+--------------+-------------------------------------------------+ + | Field | Subfield | Value | + +==========+==============+=================================================+ + | ``spec`` | ``relative`` | look for pattern after the previous item | + | +--------------+-------------------------------------------------+ + | | ``search`` | search pattern from offset (see also ``limit``) | + | +--------------+-------------------------------------------------+ + | | ``reserved`` | reserved, must be set to zero | + | +--------------+-------------------------------------------------+ + | | ``offset`` | absolute or relative offset for ``pattern`` | + | +--------------+-------------------------------------------------+ + | | ``limit`` | search area limit for start of ``pattern`` | + | +--------------+-------------------------------------------------+ + | | ``length`` | ``pattern`` length | + | +--------------+-------------------------------------------------+ + | | ``pattern`` | byte string to look for | + +----------+--------------+-------------------------------------------------+ + | ``last`` | if specified, either all 0 or with the same values as ``spec`` | + +----------+----------------------------------------------------------------+ + | ``mask`` | bit-mask applied to ``spec`` values with usual behavior | + +----------+----------------------------------------------------------------+ + +Example pattern looking for several strings at various offsets of a UDP +payload, using combined RAW items: + +.. _table_rte_flow_item_raw_example: + +.. table:: UDP payload matching + + +-------+------+----------+--------------+-------+ + | Index | Item | Field | Subfield | Value | + +=======+======+==========+==============+=======+ + | 0 | Ethernet | + +-------+----------------------------------------+ + | 1 | IPv4 | + +-------+----------------------------------------+ + | 2 | UDP | + +-------+------+----------+--------------+-------+ + | 3 | RAW | ``spec`` | ``relative`` | 1 | + | | | +--------------+-------+ + | | | | ``search`` | 1 | + | | | +--------------+-------+ + | | | | ``offset`` | 10 | + | | | +--------------+-------+ + | | | | ``limit`` | 0 | + | | | +--------------+-------+ + | | | | ``length`` | 3 | + | | | +--------------+-------+ + | | | | ``pattern`` | "foo" | + +-------+------+----------+--------------+-------+ + | 4 | RAW | ``spec`` | ``relative`` | 1 | + | | | +--------------+-------+ + | | | | ``search`` | 0 | + | | | +--------------+-------+ + | | | | ``offset`` | 20 | + | | | +--------------+-------+ + | | | | ``limit`` | 0 | + | | | +--------------+-------+ + | | | | ``length`` | 3 | + | | | +--------------+-------+ + | | | | ``pattern`` | "bar" | + +-------+------+----------+--------------+-------+ + | 5 | RAW | ``spec`` | ``relative`` | 1 | + | | | +--------------+-------+ + | | | | ``search`` | 0 | + | | | +--------------+-------+ + | | | | ``offset`` | -29 | + | | | +--------------+-------+ + | | | | ``limit`` | 0 | + | | | +--------------+-------+ + | | | | ``length`` | 3 | + | | | +--------------+-------+ + | | | | ``pattern`` | "baz" | + +-------+------+----------+--------------+-------+ + | 6 | END | + +-------+----------------------------------------+ + +This translates to: + +- Locate "foo" at least 10 bytes deep inside UDP payload. +- Locate "bar" after "foo" plus 20 bytes. +- Locate "baz" after "bar" minus 29 bytes. + +Such a packet may be represented as follows (not to scale):: + + 0 >= 10 B == 20 B + | |<--------->| |<--------->| + | | | | | + |-----|------|-----|-----|-----|-----|-----------|-----|------| + | ETH | IPv4 | UDP | ... | baz | foo | ......... | bar | .... | + |-----|------|-----|-----|-----|-----|-----------|-----|------| + | | + |<--------------------------->| + == 29 B + +Note that matching subsequent pattern items would resume after "baz", not +"bar" since matching is always performed after the previous item of the +stack. + +Item: ``ETH`` +^^^^^^^^^^^^^ + +Matches an Ethernet header. + +- ``dst``: destination MAC. +- ``src``: source MAC. +- ``type``: EtherType. + +Item: ``VLAN`` +^^^^^^^^^^^^^^ + +Matches an 802.1Q/ad VLAN tag. + +- ``tpid``: tag protocol identifier. +- ``tci``: tag control information. + +Item: ``IPV4`` +^^^^^^^^^^^^^^ + +Matches an IPv4 header. + +Note: IPv4 options are handled by dedicated pattern items. + +- ``hdr``: IPv4 header definition (``rte_ip.h``). + +Item: ``IPV6`` +^^^^^^^^^^^^^^ + +Matches an IPv6 header. + +Note: IPv6 options are handled by dedicated pattern items. + +- ``hdr``: IPv6 header definition (``rte_ip.h``). + +Item: ``ICMP`` +^^^^^^^^^^^^^^ + +Matches an ICMP header. + +- ``hdr``: ICMP header definition (``rte_icmp.h``). + +Item: ``UDP`` +^^^^^^^^^^^^^ + +Matches a UDP header. + +- ``hdr``: UDP header definition (``rte_udp.h``). + +Item: ``TCP`` +^^^^^^^^^^^^^ + +Matches a TCP header. + +- ``hdr``: TCP header definition (``rte_tcp.h``). + +Item: ``SCTP`` +^^^^^^^^^^^^^^ + +Matches a SCTP header. + +- ``hdr``: SCTP header definition (``rte_sctp.h``). + +Item: ``VXLAN`` +^^^^^^^^^^^^^^^ + +Matches a VXLAN header (RFC 7348). + +- ``flags``: normally 0x08 (I flag). +- ``rsvd0``: reserved, normally 0x000000. +- ``vni``: VXLAN network identifier. +- ``rsvd1``: reserved, normally 0x00. + +Actions +~~~~~~~ + +Each possible action is represented by a type. Some have associated +configuration structures. Several actions combined in a list can be affected +to a flow rule. That list is not ordered. + +They fall in three categories: + +- Terminating actions (such as QUEUE, DROP, RSS, PF, VF) that prevent + processing matched packets by subsequent flow rules, unless overridden + with PASSTHRU. + +- Non-terminating actions (PASSTHRU, DUP) that leave matched packets up for + additional processing by subsequent flow rules. + +- Other non-terminating meta actions that do not affect the fate of packets + (END, VOID, MARK, FLAG, COUNT). + +When several actions are combined in a flow rule, they should all have +different types (e.g. dropping a packet twice is not possible). + +Only the last action of a given type is taken into account. PMDs still +perform error checking on the entire list. + +Like matching patterns, action lists are terminated by END items. + +*Note that PASSTHRU is the only action able to override a terminating rule.* + +Example of action that redirects packets to queue index 10: + +.. _table_rte_flow_action_example: + +.. table:: Queue action + + +-----------+-------+ + | Field | Value | + +===========+=======+ + | ``index`` | 10 | + +-----------+-------+ + +Action lists examples, their order is not significant, applications must +consider all actions to be performed simultaneously: + +.. _table_rte_flow_count_and_drop: + +.. table:: Count and drop + + +-------+--------+ + | Index | Action | + +=======+========+ + | 0 | COUNT | + +-------+--------+ + | 1 | DROP | + +-------+--------+ + | 2 | END | + +-------+--------+ + +| + +.. _table_rte_flow_mark_count_redirect: + +.. table:: Mark, count and redirect + + +-------+--------+-----------+-------+ + | Index | Action | Field | Value | + +=======+========+===========+=======+ + | 0 | MARK | ``mark`` | 0x2a | + +-------+--------+-----------+-------+ + | 1 | COUNT | + +-------+--------+-----------+-------+ + | 2 | QUEUE | ``queue`` | 10 | + +-------+--------+-----------+-------+ + | 3 | END | + +-------+----------------------------+ + +| + +.. _table_rte_flow_redirect_queue_5: + +.. table:: Redirect to queue 5 + + +-------+--------+-----------+-------+ + | Index | Action | Field | Value | + +=======+========+===========+=======+ + | 0 | DROP | + +-------+--------+-----------+-------+ + | 1 | QUEUE | ``queue`` | 5 | + +-------+--------+-----------+-------+ + | 2 | END | + +-------+----------------------------+ + +In the above example, considering both actions are performed simultaneously, +the end result is that only QUEUE has any effect. + +.. _table_rte_flow_redirect_queue_3: + +.. table:: Redirect to queue 3 + + +-------+--------+-----------+-------+ + | Index | Action | Field | Value | + +=======+========+===========+=======+ + | 0 | QUEUE | ``queue`` | 5 | + +-------+--------+-----------+-------+ + | 1 | VOID | + +-------+--------+-----------+-------+ + | 2 | QUEUE | ``queue`` | 3 | + +-------+--------+-----------+-------+ + | 3 | END | + +-------+----------------------------+ + +As previously described, only the last action of a given type found in the +list is taken into account. The above example also shows that VOID is +ignored. + +Action types +~~~~~~~~~~~~ + +Common action types are described in this section. Like pattern item types, +this list is not exhaustive as new actions will be added in the future. + +Action: ``END`` +^^^^^^^^^^^^^^^ + +End marker for action lists. Prevents further processing of actions, thereby +ending the list. + +- Its numeric value is 0 for convenience. +- PMD support is mandatory. +- No configurable properties. + +.. _table_rte_flow_action_end: + +.. table:: END + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Action: ``VOID`` +^^^^^^^^^^^^^^^^ + +Used as a placeholder for convenience. It is ignored and simply discarded by +PMDs. + +- PMD support is mandatory. +- No configurable properties. + +.. _table_rte_flow_action_void: + +.. table:: VOID + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Action: ``PASSTHRU`` +^^^^^^^^^^^^^^^^^^^^ + +Leaves packets up for additional processing by subsequent flow rules. This +is the default when a rule does not contain a terminating action, but can be +specified to force a rule to become non-terminating. + +- No configurable properties. + +.. _table_rte_flow_action_passthru: + +.. table:: PASSTHRU + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Example to copy a packet to a queue and continue processing by subsequent +flow rules: + +.. _table_rte_flow_action_passthru_example: + +.. table:: Copy to queue 8 + + +-------+--------+-----------+-------+ + | Index | Action | Field | Value | + +=======+========+===========+=======+ + | 0 | PASSTHRU | + +-------+--------+-----------+-------+ + | 1 | QUEUE | ``queue`` | 8 | + +-------+--------+-----------+-------+ + | 2 | END | + +-------+----------------------------+ + +Action: ``MARK`` +^^^^^^^^^^^^^^^^ + +Attaches a 32 bit value to packets. + +This value is arbitrary and application-defined. For compatibility with FDIR +it is returned in the ``hash.fdir.hi`` mbuf field. ``PKT_RX_FDIR_ID`` is +also set in ``ol_flags``. + +.. _table_rte_flow_action_mark: + +.. table:: MARK + + +--------+-------------------------------------+ + | Field | Value | + +========+=====================================+ + | ``id`` | 32 bit value to return with packets | + +--------+-------------------------------------+ + +Action: ``FLAG`` +^^^^^^^^^^^^^^^^ + +Flag packets. Similar to `Action: MARK`_ but only affects ``ol_flags``. + +- No configurable properties. + +Note: a distinctive flag must be defined for it. + +.. _table_rte_flow_action_flag: + +.. table:: FLAG + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Action: ``QUEUE`` +^^^^^^^^^^^^^^^^^ + +Assigns packets to a given queue index. + +- Terminating by default. + +.. _table_rte_flow_action_queue: + +.. table:: QUEUE + + +-----------+--------------------+ + | Field | Value | + +===========+====================+ + | ``index`` | queue index to use | + +-----------+--------------------+ + +Action: ``DROP`` +^^^^^^^^^^^^^^^^ + +Drop packets. + +- No configurable properties. +- Terminating by default. +- PASSTHRU overrides this action if both are specified. + +.. _table_rte_flow_action_drop: + +.. table:: DROP + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Action: ``COUNT`` +^^^^^^^^^^^^^^^^^ + +Enables counters for this rule. + +These counters can be retrieved and reset through ``rte_flow_query()``, see +``struct rte_flow_query_count``. + +- Counters can be retrieved with ``rte_flow_query()``. +- No configurable properties. + +.. _table_rte_flow_action_count: + +.. table:: COUNT + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Query structure to retrieve and reset flow rule counters: + +.. _table_rte_flow_query_count: + +.. table:: COUNT query + + +---------------+-----+-----------------------------------+ + | Field | I/O | Value | + +===============+=====+===================================+ + | ``reset`` | in | reset counter after query | + +---------------+-----+-----------------------------------+ + | ``hits_set`` | out | ``hits`` field is set | + +---------------+-----+-----------------------------------+ + | ``bytes_set`` | out | ``bytes`` field is set | + +---------------+-----+-----------------------------------+ + | ``hits`` | out | number of hits for this rule | + +---------------+-----+-----------------------------------+ + | ``bytes`` | out | number of bytes through this rule | + +---------------+-----+-----------------------------------+ + +Action: ``DUP`` +^^^^^^^^^^^^^^^ + +Duplicates packets to a given queue index. + +This is normally combined with QUEUE, however when used alone, it is +actually similar to QUEUE + PASSTHRU. + +- Non-terminating by default. + +.. _table_rte_flow_action_dup: + +.. table:: DUP + + +-----------+------------------------------------+ + | Field | Value | + +===========+====================================+ + | ``index`` | queue index to duplicate packet to | + +-----------+------------------------------------+ + +Action: ``RSS`` +^^^^^^^^^^^^^^^ + +Similar to QUEUE, except RSS is additionally performed on packets to spread +them among several queues according to the provided parameters. + +Note: RSS hash result is normally stored in the ``hash.rss`` mbuf field, +however it conflicts with `Action: MARK`_ as they share the same space. When +both actions are specified, the RSS hash is discarded and +``PKT_RX_RSS_HASH`` is not set in ``ol_flags``. MARK has priority. The mbuf +structure should eventually evolve to store both. + +- Terminating by default. + +.. _table_rte_flow_action_rss: + +.. table:: RSS + + +--------------+------------------------------+ + | Field | Value | + +==============+==============================+ + | ``rss_conf`` | RSS parameters | + +--------------+------------------------------+ + | ``num`` | number of entries in queue[] | + +--------------+------------------------------+ + | ``queue[]`` | queue indices to use | + +--------------+------------------------------+ + +Action: ``PF`` +^^^^^^^^^^^^^^ + +Redirects packets to the physical function (PF) of the current device. + +- No configurable properties. +- Terminating by default. + +.. _table_rte_flow_action_pf: + +.. table:: PF + + +---------------+ + | Field | + +===============+ + | no properties | + +---------------+ + +Action: ``VF`` +^^^^^^^^^^^^^^ + +Redirects packets to a virtual function (VF) of the current device. + +Packets matched by a VF pattern item can be redirected to their original VF +ID instead of the specified one. This parameter may not be available and is +not guaranteed to work properly if the VF part is matched by a prior flow +rule or if packets are not addressed to a VF in the first place. + +- Terminating by default. + +.. _table_rte_flow_action_vf: + +.. table:: VF + + +--------------+--------------------------------+ + | Field | Value | + +==============+================================+ + | ``original`` | use original VF ID if possible | + +--------------+--------------------------------+ + | ``vf`` | VF ID to redirect packets to | + +--------------+--------------------------------+ + +Negative types +~~~~~~~~~~~~~~ + +All specified pattern items (``enum rte_flow_item_type``) and actions +(``enum rte_flow_action_type``) use positive identifiers. + +The negative space is reserved for dynamic types generated by PMDs during +run-time. PMDs may encounter them as a result but must not accept negative +identifiers they are not aware of. + +A method to generate them remains to be defined. + +Planned types +~~~~~~~~~~~~~ + +Pattern item types will be added as new protocols are implemented. + +Variable headers support through dedicated pattern items, for example in +order to match specific IPv4 options and IPv6 extension headers would be +stacked after IPv4/IPv6 items. + +Other action types are planned but are not defined yet. These include the +ability to alter packet data in several ways, such as performing +encapsulation/decapsulation of tunnel headers. + +Rules management +---------------- + +A rather simple API with few functions is provided to fully manage flow +rules. + +Each created flow rule is associated with an opaque, PMD-specific handle +pointer. The application is responsible for keeping it until the rule is +destroyed. + +Flows rules are represented by ``struct rte_flow`` objects. + +Validation +~~~~~~~~~~ + +Given that expressing a definite set of device capabilities is not +practical, a dedicated function is provided to check if a flow rule is +supported and can be created. + +.. code-block:: c + + int + rte_flow_validate(uint8_t port_id, + const struct rte_flow_attr *attr, + const struct rte_flow_item pattern[], + const struct rte_flow_action actions[], + struct rte_flow_error *error); + +While this function has no effect on the target device, the flow rule is +validated against its current configuration state and the returned value +should be considered valid by the caller for that state only. + +The returned value is guaranteed to remain valid only as long as no +successful calls to ``rte_flow_create()`` or ``rte_flow_destroy()`` are made +in the meantime and no device parameter affecting flow rules in any way are +modified, due to possible collisions or resource limitations (although in +such cases ``EINVAL`` should not be returned). + +Arguments: + +- ``port_id``: port identifier of Ethernet device. +- ``attr``: flow rule attributes. +- ``pattern``: pattern specification (list terminated by the END pattern + item). +- ``actions``: associated actions (list terminated by the END action). +- ``error``: perform verbose error reporting if not NULL. PMDs initialize + this structure in case of error only. + +Return values: + +- 0 if flow rule is valid and can be created. A negative errno value + otherwise (``rte_errno`` is also set), the following errors are defined. +- ``-ENOSYS``: underlying device does not support this functionality. +- ``-EINVAL``: unknown or invalid rule specification. +- ``-ENOTSUP``: valid but unsupported rule specification (e.g. partial + bit-masks are unsupported). +- ``-EEXIST``: collision with an existing rule. +- ``-ENOMEM``: not enough resources. +- ``-EBUSY``: action cannot be performed due to busy device resources, may + succeed if the affected queues or even the entire port are in a stopped + state (see ``rte_eth_dev_rx_queue_stop()`` and ``rte_eth_dev_stop()``). + +Creation +~~~~~~~~ + +Creating a flow rule is similar to validating one, except the rule is +actually created and a handle returned. + +.. code-block:: c + + struct rte_flow * + rte_flow_create(uint8_t port_id, + const struct rte_flow_attr *attr, + const struct rte_flow_item pattern[], + const struct rte_flow_action *actions[], + struct rte_flow_error *error); + +Arguments: + +- ``port_id``: port identifier of Ethernet device. +- ``attr``: flow rule attributes. +- ``pattern``: pattern specification (list terminated by the END pattern + item). +- ``actions``: associated actions (list terminated by the END action). +- ``error``: perform verbose error reporting if not NULL. PMDs initialize + this structure in case of error only. + +Return values: + +A valid handle in case of success, NULL otherwise and ``rte_errno`` is set +to the positive version of one of the error codes defined for +``rte_flow_validate()``. + +Destruction +~~~~~~~~~~~ + +Flow rules destruction is not automatic, and a queue or a port should not be +released if any are still attached to them. Applications must take care of +performing this step before releasing resources. + +.. code-block:: c + + int + rte_flow_destroy(uint8_t port_id, + struct rte_flow *flow, + struct rte_flow_error *error); + + +Failure to destroy a flow rule handle may occur when other flow rules depend +on it, and destroying it would result in an inconsistent state. + +This function is only guaranteed to succeed if handles are destroyed in +reverse order of their creation. + +Arguments: + +- ``port_id``: port identifier of Ethernet device. +- ``flow``: flow rule handle to destroy. +- ``error``: perform verbose error reporting if not NULL. PMDs initialize + this structure in case of error only. + +Return values: + +- 0 on success, a negative errno value otherwise and ``rte_errno`` is set. + +Flush +~~~~~ + +Convenience function to destroy all flow rule handles associated with a +port. They are released as with successive calls to ``rte_flow_destroy()``. + +.. code-block:: c + + int + rte_flow_flush(uint8_t port_id, + struct rte_flow_error *error); + +In the unlikely event of failure, handles are still considered destroyed and +no longer valid but the port must be assumed to be in an inconsistent state. + +Arguments: + +- ``port_id``: port identifier of Ethernet device. +- ``error``: perform verbose error reporting if not NULL. PMDs initialize + this structure in case of error only. + +Return values: + +- 0 on success, a negative errno value otherwise and ``rte_errno`` is set. + +Query +~~~~~ + +Query an existing flow rule. + +This function allows retrieving flow-specific data such as counters. Data +is gathered by special actions which must be present in the flow rule +definition. + +.. code-block:: c + + int + rte_flow_query(uint8_t port_id, + struct rte_flow *flow, + enum rte_flow_action_type action, + void *data, + struct rte_flow_error *error); + +Arguments: + +- ``port_id``: port identifier of Ethernet device. +- ``flow``: flow rule handle to query. +- ``action``: action type to query. +- ``data``: pointer to storage for the associated query data type. +- ``error``: perform verbose error reporting if not NULL. PMDs initialize + this structure in case of error only. + +Return values: + +- 0 on success, a negative errno value otherwise and ``rte_errno`` is set. + +Verbose error reporting +----------------------- + +The defined *errno* values may not be accurate enough for users or +application developers who want to investigate issues related to flow rules +management. A dedicated error object is defined for this purpose: + +.. code-block:: c + + enum rte_flow_error_type { + RTE_FLOW_ERROR_TYPE_NONE, /**< No error. */ + RTE_FLOW_ERROR_TYPE_UNSPECIFIED, /**< Cause unspecified. */ + RTE_FLOW_ERROR_TYPE_HANDLE, /**< Flow rule (handle). */ + RTE_FLOW_ERROR_TYPE_ATTR_GROUP, /**< Group field. */ + RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY, /**< Priority field. */ + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, /**< Ingress field. */ + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, /**< Egress field. */ + RTE_FLOW_ERROR_TYPE_ATTR, /**< Attributes structure. */ + RTE_FLOW_ERROR_TYPE_ITEM_NUM, /**< Pattern length. */ + RTE_FLOW_ERROR_TYPE_ITEM, /**< Specific pattern item. */ + RTE_FLOW_ERROR_TYPE_ACTION_NUM, /**< Number of actions. */ + RTE_FLOW_ERROR_TYPE_ACTION, /**< Specific action. */ + }; + + struct rte_flow_error { + enum rte_flow_error_type type; /**< Cause field and error types. */ + const void *cause; /**< Object responsible for the error. */ + const char *message; /**< Human-readable error message. */ + }; + +Error type ``RTE_FLOW_ERROR_TYPE_NONE`` stands for no error, in which case +remaining fields can be ignored. Other error types describe the type of the +object pointed by ``cause``. + +If non-NULL, ``cause`` points to the object responsible for the error. For a +flow rule, this may be a pattern item or an individual action. + +If non-NULL, ``message`` provides a human-readable error message. + +This object is normally allocated by applications and set by PMDs in case of +error, the message points to a constant string which does not need to be +freed by the application, however its pointer can be considered valid only +as long as its associated DPDK port remains configured. Closing the +underlying device or unloading the PMD invalidates it. + +Caveats +------- + +- DPDK does not keep track of flow rules definitions or flow rule objects + automatically. Applications may keep track of the former and must keep + track of the latter. PMDs may also do it for internal needs, however this + must not be relied on by applications. + +- Flow rules are not maintained between successive port initializations. An + application exiting without releasing them and restarting must re-create + them from scratch. + +- API operations are synchronous and blocking (``EAGAIN`` cannot be + returned). + +- There is no provision for reentrancy/multi-thread safety, although nothing + should prevent different devices from being configured at the same + time. PMDs may protect their control path functions accordingly. + +- Stopping the data path (TX/RX) should not be necessary when managing flow + rules. If this cannot be achieved naturally or with workarounds (such as + temporarily replacing the burst function pointers), an appropriate error + code must be returned (``EBUSY``). + +- PMDs, not applications, are responsible for maintaining flow rules + configuration when stopping and restarting a port or performing other + actions which may affect them. They can only be destroyed explicitly by + applications. + +For devices exposing multiple ports sharing global settings affected by flow +rules: + +- All ports under DPDK control must behave consistently, PMDs are + responsible for making sure that existing flow rules on a port are not + affected by other ports. + +- Ports not under DPDK control (unaffected or handled by other applications) + are user's responsibility. They may affect existing flow rules and cause + undefined behavior. PMDs aware of this may prevent flow rules creation + altogether in such cases. + +PMD interface +------------- + +The PMD interface is defined in ``rte_flow_driver.h``. It is not subject to +API/ABI versioning constraints as it is not exposed to applications and may +evolve independently. + +It is currently implemented on top of the legacy filtering framework through +filter type *RTE_ETH_FILTER_GENERIC* that accepts the single operation +*RTE_ETH_FILTER_GET* to return PMD-specific *rte_flow* callbacks wrapped +inside ``struct rte_flow_ops``. + +This overhead is temporarily necessary in order to keep compatibility with +the legacy filtering framework, which should eventually disappear. + +- PMD callbacks implement exactly the interface described in `Rules + management`_, except for the port ID argument which has already been + converted to a pointer to the underlying ``struct rte_eth_dev``. + +- Public API functions do not process flow rules definitions at all before + calling PMD functions (no basic error checking, no validation + whatsoever). They only make sure these callbacks are non-NULL or return + the ``ENOSYS`` (function not supported) error. + +This interface additionally defines the following helper functions: + +- ``rte_flow_ops_get()``: get generic flow operations structure from a + port. + +- ``rte_flow_error_set()``: initialize generic flow error structure. + +More will be added over time. + +Device compatibility +-------------------- + +No known implementation supports all the described features. + +Unsupported features or combinations are not expected to be fully emulated +in software by PMDs for performance reasons. Partially supported features +may be completed in software as long as hardware performs most of the work +(such as queue redirection and packet recognition). + +However PMDs are expected to do their best to satisfy application requests +by working around hardware limitations as long as doing so does not affect +the behavior of existing flow rules. + +The following sections provide a few examples of such cases and describe how +PMDs should handle them, they are based on limitations built into the +previous APIs. + +Global bit-masks +~~~~~~~~~~~~~~~~ + +Each flow rule comes with its own, per-layer bit-masks, while hardware may +support only a single, device-wide bit-mask for a given layer type, so that +two IPv4 rules cannot use different bit-masks. + +The expected behavior in this case is that PMDs automatically configure +global bit-masks according to the needs of the first flow rule created. + +Subsequent rules are allowed only if their bit-masks match those, the +``EEXIST`` error code should be returned otherwise. + +Unsupported layer types +~~~~~~~~~~~~~~~~~~~~~~~ + +Many protocols can be simulated by crafting patterns with the `Item: RAW`_ +type. + +PMDs can rely on this capability to simulate support for protocols with +headers not directly recognized by hardware. + +``ANY`` pattern item +~~~~~~~~~~~~~~~~~~~~ + +This pattern item stands for anything, which can be difficult to translate +to something hardware would understand, particularly if followed by more +specific types. + +Consider the following pattern: + +.. _table_rte_flow_unsupported_any: + +.. table:: Pattern with ANY as L3 + + +-------+-----------------------+ + | Index | Item | + +=======+=======================+ + | 0 | ETHER | + +-------+-----+---------+-------+ + | 1 | ANY | ``num`` | ``1`` | + +-------+-----+---------+-------+ + | 2 | TCP | + +-------+-----------------------+ + | 3 | END | + +-------+-----------------------+ + +Knowing that TCP does not make sense with something other than IPv4 and IPv6 +as L3, such a pattern may be translated to two flow rules instead: + +.. _table_rte_flow_unsupported_any_ipv4: + +.. table:: ANY replaced with IPV4 + + +-------+--------------------+ + | Index | Item | + +=======+====================+ + | 0 | ETHER | + +-------+--------------------+ + | 1 | IPV4 (zeroed mask) | + +-------+--------------------+ + | 2 | TCP | + +-------+--------------------+ + | 3 | END | + +-------+--------------------+ + +| + +.. _table_rte_flow_unsupported_any_ipv6: + +.. table:: ANY replaced with IPV6 + + +-------+--------------------+ + | Index | Item | + +=======+====================+ + | 0 | ETHER | + +-------+--------------------+ + | 1 | IPV6 (zeroed mask) | + +-------+--------------------+ + | 2 | TCP | + +-------+--------------------+ + | 3 | END | + +-------+--------------------+ + +Note that as soon as a ANY rule covers several layers, this approach may +yield a large number of hidden flow rules. It is thus suggested to only +support the most common scenarios (anything as L2 and/or L3). + +Unsupported actions +~~~~~~~~~~~~~~~~~~~ + +- When combined with `Action: QUEUE`_, packet counting (`Action: COUNT`_) + and tagging (`Action: MARK`_ or `Action: FLAG`_) may be implemented in + software as long as the target queue is used by a single rule. + +- A rule specifying both `Action: DUP`_ + `Action: QUEUE`_ may be translated + to two hidden rules combining `Action: QUEUE`_ and `Action: PASSTHRU`_. + +- When a single target queue is provided, `Action: RSS`_ can also be + implemented through `Action: QUEUE`_. + +Flow rules priority +~~~~~~~~~~~~~~~~~~~ + +While it would naturally make sense, flow rules cannot be assumed to be +processed by hardware in the same order as their creation for several +reasons: + +- They may be managed internally as a tree or a hash table instead of a + list. +- Removing a flow rule before adding another one can either put the new rule + at the end of the list or reuse a freed entry. +- Duplication may occur when packets are matched by several rules. + +For overlapping rules (particularly in order to use `Action: PASSTHRU`_) +predictable behavior is only guaranteed by using different priority levels. + +Priority levels are not necessarily implemented in hardware, or may be +severely limited (e.g. a single priority bit). + +For these reasons, priority levels may be implemented purely in software by +PMDs. + +- For devices expecting flow rules to be added in the correct order, PMDs + may destroy and re-create existing rules after adding a new one with + a higher priority. + +- A configurable number of dummy or empty rules can be created at + initialization time to save high priority slots for later. + +- In order to save priority levels, PMDs may evaluate whether rules are + likely to collide and adjust their priority accordingly. + +Future evolutions +----------------- + +- A device profile selection function which could be used to force a + permanent profile instead of relying on its automatic configuration based + on existing flow rules. + +- A method to optimize *rte_flow* rules with specific pattern items and + action types generated on the fly by PMDs. DPDK should assign negative + numbers to these in order to not collide with the existing types. See + `Negative types`_. + +- Adding specific egress pattern items and actions as described in + `Attribute: Traffic direction`_. + +- Optional software fallback when PMDs are unable to handle requested flow + rules so applications do not have to implement their own. + +API migration +------------- + +Exhaustive list of deprecated filter types (normally prefixed with +*RTE_ETH_FILTER_*) found in ``rte_eth_ctrl.h`` and methods to convert them +to *rte_flow* rules. + +``MACVLAN`` to ``ETH`` → ``VF``, ``PF`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*MACVLAN* can be translated to a basic `Item: ETH`_ flow rule with a +terminating `Action: VF`_ or `Action: PF`_. + +.. _table_rte_flow_migration_macvlan: + +.. table:: MACVLAN conversion + + +--------------------------+---------+ + | Pattern | Actions | + +===+=====+==========+=====+=========+ + | 0 | ETH | ``spec`` | any | VF, | + | | +----------+-----+ PF | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-----+----------+-----+---------+ + | 1 | END | END | + +---+----------------------+---------+ + +``ETHERTYPE`` to ``ETH`` → ``QUEUE``, ``DROP`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*ETHERTYPE* is basically an `Item: ETH`_ flow rule with a terminating +`Action: QUEUE`_ or `Action: DROP`_. + +.. _table_rte_flow_migration_ethertype: + +.. table:: ETHERTYPE conversion + + +--------------------------+---------+ + | Pattern | Actions | + +===+=====+==========+=====+=========+ + | 0 | ETH | ``spec`` | any | QUEUE, | + | | +----------+-----+ DROP | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-----+----------+-----+---------+ + | 1 | END | END | + +---+----------------------+---------+ + +``FLEXIBLE`` to ``RAW`` → ``QUEUE`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*FLEXIBLE* can be translated to one `Item: RAW`_ pattern with a terminating +`Action: QUEUE`_ and a defined priority level. + +.. _table_rte_flow_migration_flexible: + +.. table:: FLEXIBLE conversion + + +--------------------------+---------+ + | Pattern | Actions | + +===+=====+==========+=====+=========+ + | 0 | RAW | ``spec`` | any | QUEUE | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-----+----------+-----+---------+ + | 1 | END | END | + +---+----------------------+---------+ + +``SYN`` to ``TCP`` → ``QUEUE`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*SYN* is a `Item: TCP`_ rule with only the ``syn`` bit enabled and masked, +and a terminating `Action: QUEUE`_. + +Priority level can be set to simulate the high priority bit. + +.. _table_rte_flow_migration_syn: + +.. table:: SYN conversion + + +-----------------------------------+---------+ + | Pattern | Actions | + +===+======+==========+=============+=========+ + | 0 | ETH | ``spec`` | unset | QUEUE | + | | +----------+-------------+ | + | | | ``last`` | unset | | + | | +----------+-------------+ | + | | | ``mask`` | unset | | + +---+------+----------+-------------+---------+ + | 1 | IPV4 | ``spec`` | unset | END | + | | +----------+-------------+ | + | | | ``mask`` | unset | | + | | +----------+-------------+ | + | | | ``mask`` | unset | | + +---+------+----------+---------+---+ | + | 2 | TCP | ``spec`` | ``syn`` | 1 | | + | | +----------+---------+---+ | + | | | ``mask`` | ``syn`` | 1 | | + +---+------+----------+---------+---+ | + | 3 | END | | + +---+-------------------------------+---------+ + +``NTUPLE`` to ``IPV4``, ``TCP``, ``UDP`` → ``QUEUE`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*NTUPLE* is similar to specifying an empty L2, `Item: IPV4`_ as L3 with +`Item: TCP`_ or `Item: UDP`_ as L4 and a terminating `Action: QUEUE`_. + +A priority level can be specified as well. + +.. _table_rte_flow_migration_ntuple: + +.. table:: NTUPLE conversion + + +-----------------------------+---------+ + | Pattern | Actions | + +===+======+==========+=======+=========+ + | 0 | ETH | ``spec`` | unset | QUEUE | + | | +----------+-------+ | + | | | ``last`` | unset | | + | | +----------+-------+ | + | | | ``mask`` | unset | | + +---+------+----------+-------+---------+ + | 1 | IPV4 | ``spec`` | any | END | + | | +----------+-------+ | + | | | ``last`` | unset | | + | | +----------+-------+ | + | | | ``mask`` | any | | + +---+------+----------+-------+ | + | 2 | TCP, | ``spec`` | any | | + | | UDP +----------+-------+ | + | | | ``last`` | unset | | + | | +----------+-------+ | + | | | ``mask`` | any | | + +---+------+----------+-------+ | + | 3 | END | | + +---+-------------------------+---------+ + +``TUNNEL`` to ``ETH``, ``IPV4``, ``IPV6``, ``VXLAN`` (or other) → ``QUEUE`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*TUNNEL* matches common IPv4 and IPv6 L3/L4-based tunnel types. + +In the following table, `Item: ANY`_ is used to cover the optional L4. + +.. _table_rte_flow_migration_tunnel: + +.. table:: TUNNEL conversion + + +-------------------------------------------------------+---------+ + | Pattern | Actions | + +===+==========================+==========+=============+=========+ + | 0 | ETH | ``spec`` | any | QUEUE | + | | +----------+-------------+ | + | | | ``last`` | unset | | + | | +----------+-------------+ | + | | | ``mask`` | any | | + +---+--------------------------+----------+-------------+---------+ + | 1 | IPV4, IPV6 | ``spec`` | any | END | + | | +----------+-------------+ | + | | | ``last`` | unset | | + | | +----------+-------------+ | + | | | ``mask`` | any | | + +---+--------------------------+----------+-------------+ | + | 2 | ANY | ``spec`` | any | | + | | +----------+-------------+ | + | | | ``last`` | unset | | + | | +----------+---------+---+ | + | | | ``mask`` | ``num`` | 0 | | + +---+--------------------------+----------+---------+---+ | + | 3 | VXLAN, GENEVE, TEREDO, | ``spec`` | any | | + | | NVGRE, GRE, ... +----------+-------------+ | + | | | ``last`` | unset | | + | | +----------+-------------+ | + | | | ``mask`` | any | | + +---+--------------------------+----------+-------------+ | + | 4 | END | | + +---+---------------------------------------------------+---------+ + +``FDIR`` to most item types → ``QUEUE``, ``DROP``, ``PASSTHRU`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +*FDIR* is more complex than any other type, there are several methods to +emulate its functionality. It is summarized for the most part in the table +below. + +A few features are intentionally not supported: + +- The ability to configure the matching input set and masks for the entire + device, PMDs should take care of it automatically according to the + requested flow rules. + + For example if a device supports only one bit-mask per protocol type, + source/address IPv4 bit-masks can be made immutable by the first created + rule. Subsequent IPv4 or TCPv4 rules can only be created if they are + compatible. + + Note that only protocol bit-masks affected by existing flow rules are + immutable, others can be changed later. They become mutable again after + the related flow rules are destroyed. + +- Returning four or eight bytes of matched data when using flex bytes + filtering. Although a specific action could implement it, it conflicts + with the much more useful 32 bits tagging on devices that support it. + +- Side effects on RSS processing of the entire device. Flow rules that + conflict with the current device configuration should not be + allowed. Similarly, device configuration should not be allowed when it + affects existing flow rules. + +- Device modes of operation. "none" is unsupported since filtering cannot be + disabled as long as a flow rule is present. + +- "MAC VLAN" or "tunnel" perfect matching modes should be automatically set + according to the created flow rules. + +- Signature mode of operation is not defined but could be handled through a + specific item type if needed. + +.. _table_rte_flow_migration_fdir: + +.. table:: FDIR conversion + + +----------------------------------------+-----------------------+ + | Pattern | Actions | + +===+===================+==========+=====+=======================+ + | 0 | ETH, RAW | ``spec`` | any | QUEUE, DROP, PASSTHRU | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-------------------+----------+-----+-----------------------+ + | 1 | IPV4, IPv6 | ``spec`` | any | MARK | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-------------------+----------+-----+-----------------------+ + | 2 | TCP, UDP, SCTP | ``spec`` | any | END | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-------------------+----------+-----+ | + | 3 | VF, PF (optional) | ``spec`` | any | | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | any | | + +---+-------------------+----------+-----+ | + | 4 | END | | + +---+------------------------------------+-----------------------+ + +``HASH`` +~~~~~~~~ + +There is no counterpart to this filter type because it translates to a +global device setting instead of a pattern item. Device settings are +automatically set according to the created flow rules. + +``L2_TUNNEL`` to ``VOID`` → ``VXLAN`` (or others) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +All packets are matched. This type alters incoming packets to encapsulate +them in a chosen tunnel type, optionally redirect them to a VF as well. + +The destination pool for tag based forwarding can be emulated with other +flow rules using `Action: DUP`_. + +.. _table_rte_flow_migration_l2tunnel: + +.. table:: L2_TUNNEL conversion + + +---------------------------+--------------------+ + | Pattern | Actions | + +===+======+==========+=====+====================+ + | 0 | VOID | ``spec`` | N/A | VXLAN, GENEVE, ... | + | | | | | | + | | | | | | + | | +----------+-----+ | + | | | ``last`` | N/A | | + | | +----------+-----+ | + | | | ``mask`` | N/A | | + | | | | | | + +---+------+----------+-----+--------------------+ + | 1 | END | VF (optional) | + +---+ +--------------------+ + | 2 | | END | + +---+-----------------------+--------------------+ -- 2.20.1