From 7123fa5ae754d6e6f946845ebdb663a7ff100354 Mon Sep 17 00:00:00 2001 From: Jingjing Wu Date: Tue, 19 Jul 2016 11:31:10 +0800 Subject: [PATCH] doc: add flow bifurcation howto on Linux Flow Bifurcation is a mechanism which uses features of advanced Ethernet devices to split traffic between queues. It provides the capability to let the kernel driver and DPDK driver co-exist and take advantage of both. It is achieved by using SR-IOV and the NIC's advanced filtering. This patch describes Flow Bifurcation and adds the user guide for ixgbe and i40e NICs. Signed-off-by: Jingjing Wu Acked-by: John McNamara --- doc/guides/howto/flow_bifurcation.rst | 299 ++++++++++ .../howto/img/flow_bifurcation_overview.svg | 544 ++++++++++++++++++ doc/guides/howto/img/ixgbe_bifu_queue_idx.svg | 101 ++++ doc/guides/howto/index.rst | 1 + 4 files changed, 945 insertions(+) create mode 100644 doc/guides/howto/flow_bifurcation.rst create mode 100644 doc/guides/howto/img/flow_bifurcation_overview.svg create mode 100644 doc/guides/howto/img/ixgbe_bifu_queue_idx.svg diff --git a/doc/guides/howto/flow_bifurcation.rst b/doc/guides/howto/flow_bifurcation.rst new file mode 100644 index 0000000000..a1c6262b80 --- /dev/null +++ b/doc/guides/howto/flow_bifurcation.rst @@ -0,0 +1,299 @@ +.. BSD LICENSE + Copyright(c) 2016 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +Flow Bifurcation How-to Guide +============================= + +Flow Bifurcation is a mechanism which uses hardware capable Ethernet devices +to split traffic between Linux user space and kernel space. Since it is a +hardware assisted feature this approach can provide line rate processing +capability. Other than :ref:`KNI `, the software is just required to +enable device configuration, there is no need to take care of the packet +movement during the traffic split. This can yield better performance with +less CPU overhead. + +The Flow Bifurcation splits the incoming data traffic to user space +applications (such as DPDK applications) and/or kernel space programs (such as +the Linux kernel stack). It can direct some traffic, for example data plane +traffic, to DPDK, while directing some other traffic, for example control +plane traffic, to the traditional Linux networking stack. + +There are a number of technical options to achieve this. A typical example is +to combine the technology of SR-IOV and packet classification filtering. + +SR-IOV is a PCI standard that allows the same physical adapter to be split as +multiple virtual functions. Each virtual function (VF) has separated queues +with physical functions (PF). The network adapter will direct traffic to a +virtual function with a matching destination MAC address. In a sense, SR-IOV +has the capability for queue division. + +Packet classification filtering is a hardware capability available on most +network adapters. Filters can be configured to direct specific flows to a +given receive queue by hardware. Different NICs may have different filter +types to direct flows to a Virtual Function or a queue that belong to it. + +In this way the Linux networking stack can receive specific traffic through +the kernel driver while a DPDK application can receive specific traffic +bypassing the Linux kernel by using drivers like VFIO or the DPDK ``igb_uio`` +module. + +.. _figure_flow_bifurcation_overview: + +.. figure:: img/flow_bifurcation_overview.* + + Flow Bifurcation Overview + + +Using Flow Bifurcation on IXGBE in Linux +---------------------------------------- + +On Intel 82599 10 Gigabit Ethernet Controller series NICs Flow Bifurcation can +be achieved by SR-IOV and Intel Flow Director technologies. Traffic can be +directed to queues by the Flow Director capability, typically by matching +5-tuple of UDP/TCP packets. + +The typical procedure to achieve this is as follows: + +#. Boot the system without iommu, or with ``iommu=pt``. + +#. Create Virtual Functions: + + .. code-block:: console + + echo 2 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs + +#. Enable and set flow filters: + + .. code-block:: console + + ethtool -K eth1 ntuple on + ethtool -N eth1 flow-type udp4 src-ip 192.0.2.2 dst-ip 198.51.100.2 \ + action $queue_index_in_VF0 + ethtool -N eth1 flow-type udp4 src-ip 198.51.100.2 dst-ip 192.0.2.2 \ + action $queue_index_in_VF1 + + Where: + + * ``$queue_index_in_VFn``: Bits 39:32 of the variable defines VF id + 1; the lower 32 bits indicates the queue index of the VF. Thus: + + * ``$queue_index_in_VF0`` = ``(0x1 & 0xFF) << 32 + [queue index]``. + + * ``$queue_index_in_VF1`` = ``(0x2 & 0xFF) << 32 + [queue index]``. + + .. _figure_ixgbe_bifu_queue_idx: + + .. figure:: img/ixgbe_bifu_queue_idx.* + +#. Compile the DPDK application and insert ``igb_uio`` or probe the ``vfio-pci`` kernel modules as normal. + +#. Bind the virtual functions: + + .. code-block:: console + + modprobe vfio-pci + dpdk_nic_bind.py -b vfio-pci 01:10.0 + dpdk_nic_bind.py -b vfio-pci 01:10.1 + +#. Run a DPDK application on the VFs: + + .. code-block:: console + + testpmd -c 0xff -n 4 -- -i -w 01:10.0 -w 01:10.1 --forward-mode=mac + +In this example, traffic matching the rules will go through the VF by matching +the filter rule. All other traffic, not matching the rules, will go through +the default queue or scaling on queues in the PF. That is to say UDP packets +with the specified IP source and destination addresses will go through the +DPDK application. All other traffic, with different hosts or different +protocols, will go through the Linux networking stack. + +.. note:: + + * The above steps work on the Linux kernel v4.2. + + * The Flow Bifurcation is implemented in Linux kernel and ixgbe kernel driver using the following patches: + + * `ethtool: Add helper routines to pass vf to rx_flow_spec `_ + + * `ixgbe: Allow flow director to use entire queue space `_ + + * The Ethtool version used in this example is 3.18. + + +Using Flow Bifurcation on I40E in Linux +--------------------------------------- + +On Intel X710/XL710 series Ethernet Controllers Flow Bifurcation can be +achieved by SR-IOV, Cloud Filter and L3 VEB switch. The traffic can be +directed to queues by the Cloud Filter and L3 VEB switch's matching rule. + +* L3 VEB filters work for non-tunneled packets. It can direct a packet just by + the Destination IP address to a queue in a VF. + +* Cloud filters work for the following types of tunneled packets. + + * Inner mac. + + * Inner mac + VNI. + + * Outer mac + Inner mac + VNI. + + * Inner mac + Inner vlan + VNI. + + * Inner mac + Inner vlan. + +The typical procedure to achieve this is as follows: + +#. Boot the system without iommu, or with ``iommu=pt``. + +#. Build and insert the ``i40e.ko`` module. + +#. Create Virtual Functions: + + .. code-block:: console + + echo 2 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs + +#. Add udp port offload to the NIC if using cloud filter: + + .. code-block:: console + + ip li add vxlan0 type vxlan id 42 group 239.1.1.1 local 10.16.43.214 dev + ifconfig vxlan0 up + ip -d li show vxlan0 + + .. note:: + + Output such as ``add vxlan port 8472, index 0 success`` should be + found in the system log. + +#. Examples of enabling and setting flow filters: + + * L3 VEB filter, for a route whose destination IP is 192.168.50.108 to VF + 0's queue 2. + + .. code-block:: console + + ethtool -N flow-type ip4 dst-ip 192.168.50.108 \ + user-def 0xffffffff00000000 action 2 loc 8 + + * Inner mac, for a route whose inner destination mac is 0:0:0:0:9:0 to + PF's queue 6. + + .. code-block:: console + + ethtool -N flow-type ether dst 00:00:00:00:00:00 \ + m ff:ff:ff:ff:ff:ff src 00:00:00:00:09:00 m 00:00:00:00:00:00 \ + user-def 0xffffffff00000003 action 6 loc 1 + + * Inner mac + VNI, for a route whose inner destination mac is 0:0:0:0:9:0 + and VNI is 8 to PF's queue 4. + + .. code-block:: console + + ethtool -N flow-type ether dst 00:00:00:00:00:00 \ + m ff:ff:ff:ff:ff:ff src 00:00:00:00:09:00 m 00:00:00:00:00:00 \ + user-def 0x800000003 action 4 loc 4 + + * Outer mac + Inner mac + VNI, for a route whose outer mac is + 68:05:ca:24:03:8b, inner destination mac is c2:1a:e1:53:bc:57, and VNI + is 8 to PF's queue 2. + + .. code-block:: console + + ethtool -N flow-type ether dst 68:05:ca:24:03:8b \ + m 00:00:00:00:00:00 src c2:1a:e1:53:bc:57 m 00:00:00:00:00:00 \ + user-def 0x800000003 action 2 loc 2 + + * Inner mac + Inner vlan + VNI, for a route whose inner destination mac is + 00:00:00:00:20:00, inner vlan is 10, and VNI is 8 to VF 0's queue 1. + + .. code-block:: console + + ethtool -N flow-type ether dst 00:00:00:00:01:00 \ + m ff:ff:ff:ff:ff:ff src 00:00:00:00:20:00 m 00:00:00:00:00:00 \ + vlan 10 user-def 0x800000000 action 1 loc 5 + + * Inner mac + Inner vlan, for a route whose inner destination mac is + 00:00:00:00:20:00, and inner vlan is 10 to VF 0's queue 1. + + .. code-block:: console + + ethtool -N flow-type ether dst 00:00:00:00:01:00 \ + m ff:ff:ff:ff:ff:ff src 00:00:00:00:20:00 m 00:00:00:00:00:00 \ + vlan 10 user-def 0xffffffff00000000 action 1 loc 5 + + .. note:: + + * If the upper 32 bits of 'user-def' are ``0xffffffff``, then the + filter can be used for programming an L3 VEB filter, otherwise the + upper 32 bits of 'user-def' can carry the tenant ID/VNI if + specified/required. + + * Cloud filters can be defined with inner mac, outer mac, inner ip, + inner vlan and VNI as part of the cloud tuple. It is always the + destination (not source) mac/ip that these filters use. For all + these examples dst and src mac address fields are overloaded dst == + outer, src == inner. + + * The filter will direct a packet matching the rule to a vf id + specified in the lower 32 bit of user-def to the queue specified by + 'action'. + + * If the vf id specified by the lower 32 bit of user-def is greater + than or equal to ``max_vfs``, then the filter is for the PF queues. + +#. Compile the DPDK application and insert ``igb_uio`` or probe the ``vfio-pci`` + kernel modules as normal. + +#. Bind the virtual function: + + .. code-block:: console + + modprobe vfio-pci + dpdk_nic_bind.py -b vfio-pci 01:10.0 + dpdk_nic_bind.py -b vfio-pci 01:10.1 + +#. run DPDK application on VFs: + + .. code-block:: console + + testpmd -c 0xff -n 4 -- -i -w 01:10.0 -w 01:10.1 --forward-mode=mac + +.. note:: + + * The above steps work on the i40e Linux kernel driver v1.5.16. + + * The Ethtool version used in this example is 3.18. The mask ``ff`` means + 'not involved', while ``00`` or no mask means 'involved'. + + * For more details of the configuration, refer to the + `cloud filter test plan `_ diff --git a/doc/guides/howto/img/flow_bifurcation_overview.svg b/doc/guides/howto/img/flow_bifurcation_overview.svg new file mode 100644 index 0000000000..4fa27648d2 --- /dev/null +++ b/doc/guides/howto/img/flow_bifurcation_overview.svg @@ -0,0 +1,544 @@ + + + +image/svg+xmlPage-1Sheet.85NICNIC +NIC +Rounded Rectangle.20LINUXLINUX +LINUX +Rounded Rectangle.8Kernel pf driverKernel pf driver +Rounded RectangleFilters support traffic steering to VFFilters support traffic +steering to VF +Rectangle.3Rx Queues (0-N) PFRx Queues +( 0-N ) + PF +Rectangle.4Rx Queues (0-M) VF(vf 0)Rx Queues +( 0-M ) +VF(vf0) +Rectangle.5filtersfilters +Rounded Rectangle.6Tools to program filtersTools to +program filters +2-D word balloonDirector flows to queue index in specified VFinspecified VF +Director flows +to queue index +in specified VF +Rounded Rectangle.24DPDKDPDK +Rounded Rectangle.25SocketSocket +Simple Arrow.44Single arrowheadDynamic connector.70Dynamic connector.81Dynamic connector.83Dynamic connector.84Sheet.98Sheet.109Sheet.110 \ No newline at end of file diff --git a/doc/guides/howto/img/ixgbe_bifu_queue_idx.svg b/doc/guides/howto/img/ixgbe_bifu_queue_idx.svg new file mode 100644 index 0000000000..f7e2bd80e3 --- /dev/null +++ b/doc/guides/howto/img/ixgbe_bifu_queue_idx.svg @@ -0,0 +1,101 @@ + + + + + + + + + + + + + + + Page-1 + + + Rectangle + 0x000000 + + + + + + + + + + 0x000000 + + Rectangle.2 + VF ID + 1 + + + + + + + + + + VF ID + 1 + + Rectangle.3 + Queue Index + + + + + + + + + + Queue Index + + Sheet.4 + 0 + + + + 0 + + Sheet.6 + 31 + + + + 31 + + Sheet.7 + 39 + + + + 39 + + Sheet.8 + 63 + + + + 63 + + diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst index 664d9651d6..aa6d3e2b82 100644 --- a/doc/guides/howto/index.rst +++ b/doc/guides/howto/index.rst @@ -37,3 +37,4 @@ How To User Guides lm_bond_virtio_sriov lm_virtio_vhost_user + flow_bifurcation -- 2.20.1