From 8318984927ff621c687be9299c52ddde3357734e Mon Sep 17 00:00:00 2001 From: Rahul Lakkireddy Date: Tue, 30 Jun 2015 04:58:35 +0530 Subject: [PATCH] cxgbe: add pmd skeleton Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory. This patch: 1. Adds the Makefile to compile cxgbe pmd. 2. Registers and initializes the cxgbe pmd driver. Enable cxgbe PMD for compilation and linking with changes to: 1. config/common_linuxapp to add macros for cxgbe pmd. 2. drivers/net/Makefile to add cxgbe pmd to the compile list. 3. mk/rte.app.mk to add cxgbe pmd to link. Update MAINTAINERS file to claim responsibility for the cxgbe PMD. Signed-off-by: Rahul Lakkireddy Signed-off-by: Kumar Sanghvi [Thomas: add disabled config for bsdapp] --- MAINTAINERS | 4 + config/common_bsdapp | 10 + config/common_linuxapp | 10 + drivers/net/Makefile | 1 + drivers/net/cxgbe/Makefile | 78 +++ drivers/net/cxgbe/cxgbe.h | 48 ++ drivers/net/cxgbe/cxgbe_compat.h | 266 ++++++++ drivers/net/cxgbe/cxgbe_ethdev.c | 169 +++++ drivers/net/cxgbe/cxgbe_main.c | 706 ++++++++++++++++++++ drivers/net/cxgbe/rte_pmd_cxgbe_version.map | 4 + drivers/net/cxgbe/sge.c | 311 +++++++++ mk/rte.app.mk | 1 + 12 files changed, 1608 insertions(+) create mode 100644 drivers/net/cxgbe/Makefile create mode 100644 drivers/net/cxgbe/cxgbe.h create mode 100644 drivers/net/cxgbe/cxgbe_compat.h create mode 100644 drivers/net/cxgbe/cxgbe_ethdev.c create mode 100644 drivers/net/cxgbe/cxgbe_main.c create mode 100644 drivers/net/cxgbe/rte_pmd_cxgbe_version.map create mode 100644 drivers/net/cxgbe/sge.c diff --git a/MAINTAINERS b/MAINTAINERS index 54f097319d..ba99f4b858 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -210,6 +210,10 @@ Linux AF_PACKET M: John W. Linville F: drivers/net/af_packet/ +Chelsio cxgbe +M: Rahul Lakkireddy +F: drivers/net/cxgbe/ + Cisco enic F: drivers/net/enic/ diff --git a/config/common_bsdapp b/config/common_bsdapp index 464250bb6d..78754b25dc 100644 --- a/config/common_bsdapp +++ b/config/common_bsdapp @@ -215,6 +215,16 @@ CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1 +# +# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD +# +CONFIG_RTE_LIBRTE_CXGBE_PMD=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n + # # Compile burst-oriented Cisco ENIC PMD driver # diff --git a/config/common_linuxapp b/config/common_linuxapp index fd9d5d6211..f5646e0d96 100644 --- a/config/common_linuxapp +++ b/config/common_linuxapp @@ -212,6 +212,16 @@ CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1 +# +# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD +# +CONFIG_RTE_LIBRTE_CXGBE_PMD=y +CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n +CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n + # # Compile burst-oriented Cisco ENIC PMD driver # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1e6648aa45..644cacb126 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -33,6 +33,7 @@ include $(RTE_SDK)/mk/rte.vars.mk DIRS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += af_packet DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += bonding +DIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += cxgbe DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += e1000 DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k diff --git a/drivers/net/cxgbe/Makefile b/drivers/net/cxgbe/Makefile new file mode 100644 index 0000000000..4dfc6b029d --- /dev/null +++ b/drivers/net/cxgbe/Makefile @@ -0,0 +1,78 @@ +# BSD LICENSE +# +# Copyright(c) 2014-2015 Chelsio Communications. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Chelsio Communications nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +include $(RTE_SDK)/mk/rte.vars.mk + +# +# library name +# +LIB = librte_pmd_cxgbe.a + +CFLAGS += -I$(SRCDIR)/base/ +CFLAGS += -I$(SRCDIR) +CFLAGS += -O3 +CFLAGS += $(WERROR_FLAGS) + +EXPORT_MAP := rte_pmd_cxgbe_version.map + +LIBABIVER := 1 + +ifeq ($(CC), icc) +# +# CFLAGS for icc +# +CFLAGS_BASE_DRIVER = -wd174 -wd593 -wd869 -wd981 -wd2259 +else +# +# CFLAGS for gcc +# +ifeq ($(shell test $(GCC_VERSION) -ge 44 && echo 1), 1) +CFLAGS += -Wno-deprecated +endif +CFLAGS_BASE_DRIVER = -Wno-unused-parameter -Wno-unused-value +CFLAGS_BASE_DRIVER += -Wno-strict-aliasing -Wno-format-extra-args + +endif + +# +# all source are stored in SRCS-y +# +SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += cxgbe_ethdev.c +SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += cxgbe_main.c +SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += sge.c +SRCS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += base/t4_hw.c + +# this lib depends upon: +DEPDIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += lib/librte_eal lib/librte_ether +DEPDIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += lib/librte_mempool lib/librte_mbuf +DEPDIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += lib/librte_net lib/librte_malloc + +include $(RTE_SDK)/mk/rte.lib.mk diff --git a/drivers/net/cxgbe/cxgbe.h b/drivers/net/cxgbe/cxgbe.h new file mode 100644 index 0000000000..44d48dc48a --- /dev/null +++ b/drivers/net/cxgbe/cxgbe.h @@ -0,0 +1,48 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CXGBE_H_ +#define _CXGBE_H_ + +#include "common.h" +#include "t4_regs.h" + +#define CXGBE_MIN_RING_DESC_SIZE 1024 /* Min TX/RX descriptor ring size */ +#define CXGBE_MAX_RING_DESC_SIZE 4096 /* Max TX/RX descriptor ring size */ + +#define CXGBE_DEFAULT_TX_DESC_SIZE 1024 /* Default TX ring size */ +#define CXGBE_DEFAULT_RX_DESC_SIZE 1024 /* Default RX ring size */ + +int cxgbe_probe(struct adapter *adapter); + +#endif /* _CXGBE_H_ */ diff --git a/drivers/net/cxgbe/cxgbe_compat.h b/drivers/net/cxgbe/cxgbe_compat.h new file mode 100644 index 0000000000..3b871eeca9 --- /dev/null +++ b/drivers/net/cxgbe/cxgbe_compat.h @@ -0,0 +1,266 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CXGBE_COMPAT_H_ +#define _CXGBE_COMPAT_H_ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define dev_printf(level, fmt, args...) \ + RTE_LOG(level, PMD, "rte_cxgbe_pmd: " fmt, ## args) + +#define dev_err(x, args...) dev_printf(ERR, args) +#define dev_info(x, args...) dev_printf(INFO, args) +#define dev_warn(x, args...) dev_printf(WARNING, args) + +#ifdef RTE_LIBRTE_CXGBE_DEBUG +#define dev_debug(x, args...) dev_printf(DEBUG, args) +#else +#define dev_debug(x, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_CXGBE_DEBUG_REG +#define CXGBE_DEBUG_REG(x, args...) dev_printf(DEBUG, "REG:" args) +#else +#define CXGBE_DEBUG_REG(x, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_CXGBE_DEBUG_MBOX +#define CXGBE_DEBUG_MBOX(x, args...) dev_printf(DEBUG, "MBOX:" args) +#else +#define CXGBE_DEBUG_MBOX(x, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_CXGBE_DEBUG_TX +#define CXGBE_DEBUG_TX(x, args...) dev_printf(DEBUG, "TX:" args) +#else +#define CXGBE_DEBUG_TX(x, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_CXGBE_DEBUG_RX +#define CXGBE_DEBUG_RX(x, args...) dev_printf(DEBUG, "RX:" args) +#else +#define CXGBE_DEBUG_RX(x, args...) do { } while (0) +#endif + +#ifdef RTE_LIBRTE_CXGBE_DEBUG +#define CXGBE_FUNC_TRACE() \ + RTE_LOG(DEBUG, PMD, "CXGBE trace: %s\n", __func__) +#else +#define CXGBE_FUNC_TRACE() do { } while (0) +#endif + +#define pr_err(y, args...) dev_err(0, y, ##args) +#define pr_warn(y, args...) dev_warn(0, y, ##args) +#define pr_info(y, args...) dev_info(0, y, ##args) +#define BUG() pr_err("BUG at %s:%d", __func__, __LINE__) + +#define ASSERT(x) do {\ + if (!(x)) \ + rte_panic("CXGBE: x"); \ +} while (0) +#define BUG_ON(x) ASSERT(!(x)) + +#ifndef WARN_ON +#define WARN_ON(x) do { \ + int ret = !!(x); \ + if (unlikely(ret)) \ + pr_warn("WARN_ON: \"" #x "\" at %s:%d\n", __func__, __LINE__); \ +} while (0) +#endif + +#define __iomem + +#ifndef BIT +#define BIT(n) (1 << (n)) +#endif + +#define L1_CACHE_SHIFT 6 +#define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT) + +#define PAGE_SHIFT 12 +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) + +#define VLAN_HLEN 4 + +#define rmb() rte_rmb() /* dpdk rte provided rmb */ +#define wmb() rte_wmb() /* dpdk rte provided wmb */ + +typedef uint8_t u8; +typedef int8_t s8; +typedef uint16_t u16; +typedef uint32_t u32; +typedef int32_t s32; +typedef uint64_t u64; +typedef int bool; +typedef uint64_t dma_addr_t; + +#ifndef __le16 +#define __le16 uint16_t +#endif +#ifndef __le32 +#define __le32 uint32_t +#endif +#ifndef __le64 +#define __le64 uint64_t +#endif +#ifndef __be16 +#define __be16 uint16_t +#endif +#ifndef __be32 +#define __be32 uint32_t +#endif +#ifndef __be64 +#define __be64 uint64_t +#endif +#ifndef __u8 +#define __u8 uint8_t +#endif +#ifndef __u16 +#define __u16 uint16_t +#endif +#ifndef __u32 +#define __u32 uint32_t +#endif +#ifndef __u64 +#define __u64 uint64_t +#endif + +#define FALSE 0 +#define TRUE 1 +#define false 0 +#define true 1 + +#define min(a, b) RTE_MIN(a, b) +#define max(a, b) RTE_MAX(a, b) + +/* + * round up val _p to a power of 2 size _s + */ +#define roundup(_p, _s) (((unsigned long)(_p) + (_s - 1)) & ~(_s - 1)) + +#undef container_of +#define container_of(ptr, type, member) ({ \ + typeof(((type *)0)->member)(*__mptr) = (ptr); \ + (type *)((char *)__mptr - offsetof(type, member)); }) + +#define ARRAY_SIZE(arr) RTE_DIM(arr) + +#define cpu_to_be16(o) rte_cpu_to_be_16(o) +#define cpu_to_be32(o) rte_cpu_to_be_32(o) +#define cpu_to_be64(o) rte_cpu_to_be_64(o) +#define cpu_to_le32(o) rte_cpu_to_le_32(o) +#define be16_to_cpu(o) rte_be_to_cpu_16(o) +#define be32_to_cpu(o) rte_be_to_cpu_32(o) +#define be64_to_cpu(o) rte_be_to_cpu_64(o) +#define le32_to_cpu(o) rte_le_to_cpu_32(o) + +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) +#define DELAY(x) rte_delay_us(x) +#define udelay(x) DELAY(x) +#define msleep(x) DELAY(1000 * (x)) +#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) + +static inline uint8_t hweight32(uint32_t word32) +{ + uint32_t res = word32 - ((word32 >> 1) & 0x55555555); + + res = (res & 0x33333333) + ((res >> 2) & 0x33333333); + res = (res + (res >> 4)) & 0x0F0F0F0F; + res = res + (res >> 8); + return (res + (res >> 16)) & 0x000000FF; + +} /* weight32 */ + +/** + * fls - find last (most-significant) bit set + * @x: the word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(int x) +{ + return x ? sizeof(x) * 8 - __builtin_clz(x) : 0; +} + +static inline unsigned long ilog2(unsigned long n) +{ + unsigned int e = 0; + + while (n) { + if (n & ~((1 << 8) - 1)) { + e += 8; + n >>= 8; + continue; + } + + if (n & ~((1 << 4) - 1)) { + e += 4; + n >>= 4; + } + + for (;;) { + n >>= 1; + if (n == 0) + break; + e++; + } + } + + return e; +} + +static inline void writel(unsigned int val, volatile void __iomem *addr) +{ + *(volatile unsigned int *)addr = val; +} + +static inline void writeq(u64 val, volatile void __iomem *addr) +{ + writel(val, addr); + writel(val >> 32, (void *)((uintptr_t)addr + 4)); +} + +#endif /* _CXGBE_COMPAT_H_ */ diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c new file mode 100644 index 0000000000..30d39b4669 --- /dev/null +++ b/drivers/net/cxgbe/cxgbe_ethdev.c @@ -0,0 +1,169 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cxgbe.h" + +/* + * Macros needed to support the PCI Device ID Table ... + */ +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN \ + static struct rte_pci_id cxgb4_pci_tbl[] = { +#define CH_PCI_DEVICE_ID_FUNCTION 0x4 + +#define PCI_VENDOR_ID_CHELSIO 0x1425 + +#define CH_PCI_ID_TABLE_ENTRY(devid) \ + { RTE_PCI_DEVICE(PCI_VENDOR_ID_CHELSIO, (devid)) } + +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \ + { .vendor_id = 0, } \ + } + +/* + *... and the PCI ID Table itself ... + */ +#include "t4_pci_id_tbl.h" + +static struct eth_dev_ops cxgbe_eth_dev_ops = { +}; + +/* + * Initialize driver + * It returns 0 on success. + */ +static int eth_cxgbe_dev_init(struct rte_eth_dev *eth_dev) +{ + struct rte_pci_device *pci_dev; + struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private); + struct adapter *adapter = NULL; + char name[RTE_ETH_NAME_MAX_LEN]; + int err = 0; + + CXGBE_FUNC_TRACE(); + + eth_dev->dev_ops = &cxgbe_eth_dev_ops; + + /* for secondary processes, we don't initialise any further as primary + * has already done this work. + */ + if (rte_eal_process_type() != RTE_PROC_PRIMARY) + return 0; + + pci_dev = eth_dev->pci_dev; + snprintf(name, sizeof(name), "cxgbeadapter%d", eth_dev->data->port_id); + adapter = rte_zmalloc(name, sizeof(*adapter), 0); + if (!adapter) + return -1; + + adapter->use_unpacked_mode = 1; + adapter->regs = (void *)pci_dev->mem_resource[0].addr; + if (!adapter->regs) { + dev_err(adapter, "%s: cannot map device registers\n", __func__); + err = -ENOMEM; + goto out_free_adapter; + } + adapter->pdev = pci_dev; + adapter->eth_dev = eth_dev; + pi->adapter = adapter; + + err = cxgbe_probe(adapter); + if (err) + dev_err(adapter, "%s: cxgbe probe failed with err %d\n", + __func__, err); + +out_free_adapter: + return err; +} + +static struct eth_driver rte_cxgbe_pmd = { + { + .name = "rte_cxgbe_pmd", + .id_table = cxgb4_pci_tbl, + .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC, + }, + .eth_dev_init = eth_cxgbe_dev_init, + .dev_private_size = sizeof(struct port_info), +}; + +/* + * Driver initialization routine. + * Invoked once at EAL init time. + * Register itself as the [Poll Mode] Driver of PCI CXGBE devices. + */ +static int rte_cxgbe_pmd_init(const char *name __rte_unused, + const char *params __rte_unused) +{ + CXGBE_FUNC_TRACE(); + + rte_eth_driver_register(&rte_cxgbe_pmd); + return 0; +} + +static struct rte_driver rte_cxgbe_driver = { + .name = "cxgbe_driver", + .type = PMD_PDEV, + .init = rte_cxgbe_pmd_init, +}; + +PMD_REGISTER_DRIVER(rte_cxgbe_driver); diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c new file mode 100644 index 0000000000..6f3a6db7e2 --- /dev/null +++ b/drivers/net/cxgbe/cxgbe_main.c @@ -0,0 +1,706 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "t4_regs.h" +#include "t4_msg.h" +#include "cxgbe.h" + +static void setup_memwin(struct adapter *adap) +{ + u32 mem_win0_base; + + /* For T5, only relative offset inside the PCIe BAR is passed */ + mem_win0_base = MEMWIN0_BASE; + + /* + * Set up memory window for accessing adapter memory ranges. (Read + * back MA register to ensure that changes propagate before we attempt + * to use the new values.) + */ + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, + MEMWIN_NIC), + mem_win0_base | V_BIR(0) | + V_WINDOW(ilog2(MEMWIN0_APERTURE) - X_WINDOW_SHIFT)); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, + MEMWIN_NIC)); +} + +static void print_port_info(struct adapter *adap) +{ + int i; + char buf[80]; + struct rte_pci_addr *loc = &adap->pdev->addr; + + for_each_port(adap, i) { + const struct port_info *pi = &adap->port[i]; + char *bufp = buf; + + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M) + bufp += sprintf(bufp, "100/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G) + bufp += sprintf(bufp, "1000/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) + bufp += sprintf(bufp, "10G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G) + bufp += sprintf(bufp, "40G/"); + if (bufp != buf) + --bufp; + sprintf(bufp, "BASE-%s", + t4_get_port_type_description(pi->port_type)); + + dev_info(adap, + " " PCI_PRI_FMT " Chelsio rev %d %s %s\n", + loc->domain, loc->bus, loc->devid, loc->function, + CHELSIO_CHIP_RELEASE(adap->params.chip), buf, + (adap->flags & USING_MSIX) ? " MSI-X" : + (adap->flags & USING_MSI) ? " MSI" : ""); + } +} + +/* + * Tweak configuration based on system architecture, etc. Most of these have + * defaults assigned to them by Firmware Configuration Files (if we're using + * them) but need to be explicitly set if we're using hard-coded + * initialization. So these are essentially common tweaks/settings for + * Configuration Files and hard-coded initialization ... + */ +static int adap_init0_tweaks(struct adapter *adapter) +{ + u8 rx_dma_offset; + + /* + * Fix up various Host-Dependent Parameters like Page Size, Cache + * Line Size, etc. The firmware default is for a 4KB Page Size and + * 64B Cache Line Size ... + */ + t4_fixup_host_params_compat(adapter, PAGE_SIZE, L1_CACHE_BYTES, + T5_LAST_REV); + + /* + * Keep the chip default offset to deliver Ingress packets into our + * DMA buffers to zero + */ + rx_dma_offset = 0; + t4_set_reg_field(adapter, A_SGE_CONTROL, V_PKTSHIFT(M_PKTSHIFT), + V_PKTSHIFT(rx_dma_offset)); + + /* + * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux + * adds the pseudo header itself. + */ + t4_tp_wr_bits_indirect(adapter, A_TP_INGRESS_CONFIG, + F_CSUM_HAS_PSEUDO_HDR, 0); + + return 0; +} + +/* + * Attempt to initialize the adapter via a Firmware Configuration File. + */ +static int adap_init0_config(struct adapter *adapter, int reset) +{ + struct fw_caps_config_cmd caps_cmd; + unsigned long mtype = 0, maddr = 0; + u32 finiver, finicsum, cfcsum; + int ret; + int config_issued = 0; + int cfg_addr; + char config_name[20]; + + /* + * Reset device if necessary. + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + F_PIORSTMODE | F_PIORST); + if (ret < 0) { + dev_warn(adapter, "Firmware reset failed, error %d\n", + -ret); + goto bye; + } + } + + cfg_addr = t4_flash_cfg_addr(adapter); + if (cfg_addr < 0) { + ret = cfg_addr; + dev_warn(adapter, "Finding address for firmware config file in flash failed, error %d\n", + -ret); + goto bye; + } + + strcpy(config_name, "On Flash"); + mtype = FW_MEMTYPE_CF_FLASH; + maddr = cfg_addr; + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. We don't use t4_fw_config_file() + * because we want the ability to modify various features after we've + * processed the configuration file ... + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ); + caps_cmd.cfvalid_to_len16 = + cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID | + V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + /* + * If the CAPS_CONFIG failed with an ENOENT (for a Firmware + * Configuration File in FLASH), our last gasp effort is to use the + * Firmware Configuration File which is embedded in the firmware. A + * very few early versions of the firmware didn't have one embedded + * but we can ignore those. + */ + if (ret == -ENOENT) { + dev_info(adapter, "%s: Going for embedded config in firmware..\n", + __func__); + + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ); + caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, + sizeof(caps_cmd), &caps_cmd); + strcpy(config_name, "Firmware Default"); + } + + config_issued = 1; + if (ret < 0) + goto bye; + + finiver = be32_to_cpu(caps_cmd.finiver); + finicsum = be32_to_cpu(caps_cmd.finicsum); + cfcsum = be32_to_cpu(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adapter, "Configuration File checksum mismatch: [fini] csum=%#x, computed csum=%#x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.niccaps &= cpu_to_be16(~(FW_CAPS_CONFIG_NIC_HASHFILTER | + FW_CAPS_CONFIG_NIC_ETHOFLD)); + caps_cmd.toecaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE); + caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) { + dev_warn(adapter, "Unable to finalize Firmware Capabilities %d\n", + -ret); + goto bye; + } + + /* + * Tweak configuration based on system architecture, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) { + dev_warn(adapter, "Unable to do init0-tweaks %d\n", -ret); + goto bye; + } + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) { + dev_warn(adapter, "Initializing Firmware failed, error %d\n", + -ret); + goto bye; + } + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants burried in the driver. + */ + dev_info(adapter, + "Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n", + config_name, finiver, cfcsum); + + return 0; + + /* + * Something bad happened. Return the error ... (If the "error" + * is that there's no Configuration File on the adapter we don't + * want to issue a warning since this is fairly common.) + */ +bye: + if (config_issued && ret != -ENOENT) + dev_warn(adapter, "\"%s\" configuration file error %d\n", + config_name, -ret); + + dev_debug(adapter, "%s: returning ret = %d ..\n", __func__, ret); + return ret; +} + +static int adap_init0(struct adapter *adap) +{ + int ret = 0; + u32 v, port_vec; + enum dev_state state; + u32 params[7], val[7]; + int reset = 1; + int mbox = adap->mbox; + + /* + * Contact FW, advertising Master capability. + */ + ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state); + if (ret < 0) { + dev_err(adap, "%s: could not connect to FW, error %d\n", + __func__, -ret); + goto bye; + } + + CXGBE_DEBUG_MBOX(adap, "%s: adap->mbox = %d; ret = %d\n", __func__, + adap->mbox, ret); + + if (ret == mbox) + adap->flags |= MASTER_PF; + + if (state == DEV_STATE_INIT) { + /* + * Force halt and reset FW because a previous instance may have + * exited abnormally without properly shutting down + */ + ret = t4_fw_halt(adap, adap->mbox, reset); + if (ret < 0) { + dev_err(adap, "Failed to halt. Exit.\n"); + goto bye; + } + + ret = t4_fw_restart(adap, adap->mbox, reset); + if (ret < 0) { + dev_err(adap, "Failed to restart. Exit.\n"); + goto bye; + } + state &= ~DEV_STATE_INIT; + } + + t4_get_fw_version(adap, &adap->params.fw_vers); + t4_get_tp_version(adap, &adap->params.tp_vers); + + dev_info(adap, "fw: %u.%u.%u.%u, TP: %u.%u.%u.%u\n", + G_FW_HDR_FW_VER_MAJOR(adap->params.fw_vers), + G_FW_HDR_FW_VER_MINOR(adap->params.fw_vers), + G_FW_HDR_FW_VER_MICRO(adap->params.fw_vers), + G_FW_HDR_FW_VER_BUILD(adap->params.fw_vers), + G_FW_HDR_FW_VER_MAJOR(adap->params.tp_vers), + G_FW_HDR_FW_VER_MINOR(adap->params.tp_vers), + G_FW_HDR_FW_VER_MICRO(adap->params.tp_vers), + G_FW_HDR_FW_VER_BUILD(adap->params.tp_vers)); + + ret = t4_get_core_clock(adap, &adap->params.vpd); + if (ret < 0) { + dev_err(adap, "%s: could not get core clock, error %d\n", + __func__, -ret); + goto bye; + } + + /* + * Find out what ports are available to us. Note that we need to do + * this before calling adap_init0_no_config() since it needs nports + * and portvec ... + */ + v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec); + if (ret < 0) { + dev_err(adap, "%s: failure in t4_queury_params; error = %d\n", + __func__, ret); + goto bye; + } + + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + + dev_debug(adap, "%s: adap->params.nports = %u\n", __func__, + adap->params.nports); + + /* + * If the firmware is initialized already (and we're not forcing a + * master initialization), note that we're living with existing + * adapter parameters. Otherwise, it's time to try initializing the + * adapter ... + */ + if (state == DEV_STATE_INIT) { + dev_info(adap, "Coming up as %s: Adapter already initialized\n", + adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); + } else { + dev_info(adap, "Coming up as MASTER: Initializing adapter\n"); + + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_err(adap, + "No Configuration File present on adapter. Using hard-wired configuration parameters.\n"); + goto bye; + } + } + if (ret < 0) { + dev_err(adap, "could not initialize adapter, error %d\n", -ret); + goto bye; + } + + /* + * Give the SGE code a chance to pull in anything that it needs ... + * Note that this must be called after we retrieve our VPD parameters + * in order to know how to convert core ticks to seconds, etc. + */ + ret = t4_sge_init(adap); + if (ret < 0) { + dev_err(adap, "t4_sge_init failed with error %d\n", + -ret); + goto bye; + } + + /* + * Grab some of our basic fundamental operating parameters. + */ +#define FW_PARAM_DEV(param) \ + (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + +#define FW_PARAM_PFVF(param) \ + (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ + V_FW_PARAMS_PARAM_Y(0) | \ + V_FW_PARAMS_PARAM_Z(0)) + + /* If we're running on newer firmware, let it know that we're + * prepared to deal with encapsulated CPL messages. Older + * firmware won't understand this and we'll just get + * unencapsulated messages ... + */ + params[0] = FW_PARAM_PFVF(CPLFW4MSG_ENCAP); + val[0] = 1; + (void)t4_set_params(adap, adap->mbox, adap->pf, 0, 1, params, val); + + /* + * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL + * capability. Earlier versions of the firmware didn't have the + * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no + * permission to use ULPTX MEMWRITE DSGL. + */ + if (is_t4(adap->params.chip)) { + adap->params.ulptx_memwrite_dsgl = false; + } else { + params[0] = FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL); + ret = t4_query_params(adap, adap->mbox, adap->pf, 0, + 1, params, val); + adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0); + } + + /* + * The MTU/MSS Table is initialized by now, so load their values. If + * we're initializing the adapter, then we'll make any modifications + * we want to the MTU/MSS Table and also initialize the congestion + * parameters. + */ + t4_read_mtu_tbl(adap, adap->params.mtus, NULL); + if (state != DEV_STATE_INIT) { + int i; + + /* + * The default MTU Table contains values 1492 and 1500. + * However, for TCP, it's better to have two values which are + * a multiple of 8 +/- 4 bytes apart near this popular MTU. + * This allows us to have a TCP Data Payload which is a + * multiple of 8 regardless of what combination of TCP Options + * are in use (always a multiple of 4 bytes) which is + * important for performance reasons. For instance, if no + * options are in use, then we have a 20-byte IP header and a + * 20-byte TCP header. In this case, a 1500-byte MSS would + * result in a TCP Data Payload of 1500 - 40 == 1460 bytes + * which is not a multiple of 8. So using an MSS of 1488 in + * this case results in a TCP Data Payload of 1448 bytes which + * is a multiple of 8. On the other hand, if 12-byte TCP Time + * Stamps have been negotiated, then an MTU of 1500 bytes + * results in a TCP Data Payload of 1448 bytes which, as + * above, is a multiple of 8 bytes ... + */ + for (i = 0; i < NMTUS; i++) + if (adap->params.mtus[i] == 1492) { + adap->params.mtus[i] = 1488; + break; + } + + t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, + adap->params.b_wnd); + } + t4_init_sge_params(adap); + t4_init_tp_params(adap); + + adap->params.drv_memwin = MEMWIN_NIC; + adap->flags |= FW_OK; + dev_debug(adap, "%s: returning zero..\n", __func__); + return 0; + + /* + * Something bad happened. If a command timed out or failed with EIO + * FW does not operate within its spec or something catastrophic + * happened to HW/FW, stop issuing commands. + */ +bye: + if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->mbox); + return ret; +} + +/** + * t4_os_portmod_changed - handle port module changes + * @adap: the adapter associated with the module change + * @port_id: the port index whose module status has changed + * + * This is the OS-dependent handler for port module changes. It is + * invoked when a port module is removed or inserted for any OS-specific + * processing. + */ +void t4_os_portmod_changed(const struct adapter *adap, int port_id) +{ + static const char * const mod_str[] = { + NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" + }; + + const struct port_info *pi = &adap->port[port_id]; + + if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) + dev_info(adap, "Port%d: port module unplugged\n", pi->port_id); + else if (pi->mod_type < ARRAY_SIZE(mod_str)) + dev_info(adap, "Port%d: %s port module inserted\n", pi->port_id, + mod_str[pi->mod_type]); + else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) + dev_info(adap, "Port%d: unsupported optical port module inserted\n", + pi->port_id); + else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) + dev_info(adap, "Port%d: unknown port module inserted, forcing TWINAX\n", + pi->port_id); + else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR) + dev_info(adap, "Port%d: transceiver module error\n", + pi->port_id); + else + dev_info(adap, "Port%d: unknown module type %d inserted\n", + pi->port_id, pi->mod_type); +} + +int cxgbe_probe(struct adapter *adapter) +{ + struct port_info *pi; + int func, i; + int err = 0; + + func = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI)); + adapter->mbox = func; + adapter->pf = func; + + t4_os_lock_init(&adapter->mbox_lock); + TAILQ_INIT(&adapter->mbox_list); + + err = t4_prep_adapter(adapter); + if (err) + return err; + + setup_memwin(adapter); + err = adap_init0(adapter); + if (err) { + dev_err(adapter, "%s: Adapter initialization failed, error %d\n", + __func__, err); + goto out_free; + } + + if (!is_t4(adapter->params.chip)) { + /* + * The userspace doorbell BAR is split evenly into doorbell + * regions, each associated with an egress queue. If this + * per-queue region is large enough (at least UDBS_SEG_SIZE) + * then it can be used to submit a tx work request with an + * implied doorbell. Enable write combining on the BAR if + * there is room for such work requests. + */ + int s_qpp, qpp, num_seg; + + s_qpp = (S_QUEUESPERPAGEPF0 + + (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * + adapter->pf); + qpp = 1 << ((t4_read_reg(adapter, + A_SGE_EGRESS_QUEUES_PER_PAGE_PF) >> s_qpp) + & M_QUEUESPERPAGEPF0); + num_seg = PAGE_SIZE / UDBS_SEG_SIZE; + if (qpp > num_seg) + dev_warn(adapter, "Incorrect SGE EGRESS QUEUES_PER_PAGE configuration, continuing in debug mode\n"); + + adapter->bar2 = (void *)adapter->pdev->mem_resource[2].addr; + if (!adapter->bar2) { + dev_err(adapter, "cannot map device bar2 region\n"); + err = -ENOMEM; + goto out_free; + } + t4_write_reg(adapter, A_SGE_STAT_CFG, V_STATSOURCE_T5(7) | + V_STATMODE(0)); + } + + for_each_port(adapter, i) { + char name[RTE_ETH_NAME_MAX_LEN]; + struct rte_eth_dev_data *data = NULL; + const unsigned int numa_node = rte_socket_id(); + + pi = &adapter->port[i]; + pi->adapter = adapter; + pi->xact_addr_filt = -1; + pi->port_id = i; + + snprintf(name, sizeof(name), "cxgbe%d", + adapter->eth_dev->data->port_id + i); + + if (i == 0) { + /* First port is already allocated by DPDK */ + pi->eth_dev = adapter->eth_dev; + goto allocate_mac; + } + + /* + * now do all data allocation - for eth_dev structure, + * and internal (private) data for the remaining ports + */ + + /* reserve an ethdev entry */ + pi->eth_dev = rte_eth_dev_allocate(name, RTE_ETH_DEV_PCI); + if (!pi->eth_dev) + goto out_free; + + data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node); + if (!data) + goto out_free; + + data->port_id = adapter->eth_dev->data->port_id + i; + + pi->eth_dev->data = data; + +allocate_mac: + pi->eth_dev->pci_dev = adapter->pdev; + pi->eth_dev->data->dev_private = pi; + pi->eth_dev->driver = adapter->eth_dev->driver; + pi->eth_dev->dev_ops = adapter->eth_dev->dev_ops; + TAILQ_INIT(&pi->eth_dev->link_intr_cbs); + + pi->eth_dev->data->mac_addrs = rte_zmalloc(name, + ETHER_ADDR_LEN, 0); + if (!pi->eth_dev->data->mac_addrs) { + dev_err(adapter, "%s: Mem allocation failed for storing mac addr, aborting\n", + __func__); + err = -1; + goto out_free; + } + } + + if (adapter->flags & FW_OK) { + err = t4_port_init(adapter, adapter->mbox, adapter->pf, 0); + if (err) { + dev_err(adapter, "%s: t4_port_init failed with err %d\n", + __func__, err); + goto out_free; + } + } + + print_port_info(adapter); + + return 0; + +out_free: + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + if (pi->viid != 0) + t4_free_vi(adapter, adapter->mbox, adapter->pf, + 0, pi->viid); + /* Skip first port since it'll be de-allocated by DPDK */ + if (i == 0) + continue; + if (pi->eth_dev->data) + rte_free(pi->eth_dev->data); + } + + if (adapter->flags & FW_OK) + t4_fw_bye(adapter, adapter->mbox); + return -err; +} diff --git a/drivers/net/cxgbe/rte_pmd_cxgbe_version.map b/drivers/net/cxgbe/rte_pmd_cxgbe_version.map new file mode 100644 index 0000000000..bd8138a034 --- /dev/null +++ b/drivers/net/cxgbe/rte_pmd_cxgbe_version.map @@ -0,0 +1,4 @@ +DPDK_2.1 { + + local: *; +}; diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c new file mode 100644 index 0000000000..20da0fde9b --- /dev/null +++ b/drivers/net/cxgbe/sge.c @@ -0,0 +1,311 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common.h" +#include "t4_regs.h" +#include "t4_msg.h" +#include "cxgbe.h" + +/* + * Rx buffer sizes for "usembufs" Free List buffers (one ingress packet + * per mbuf buffer). We currently only support two sizes for 1500- and + * 9000-byte MTUs. We could easily support more but there doesn't seem to be + * much need for that ... + */ +#define FL_MTU_SMALL 1500 +#define FL_MTU_LARGE 9000 + +static inline unsigned int fl_mtu_bufsize(struct adapter *adapter, + unsigned int mtu) +{ + struct sge *s = &adapter->sge; + + return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align); +} + +#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL) +#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE) + +/* + * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses + * these to specify the buffer size as an index into the SGE Free List Buffer + * Size register array. We also use bit 4, when the buffer has been unmapped + * for DMA, but this is of course never sent to the hardware and is only used + * to prevent double unmappings. All of the above requires that the Free List + * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are + * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal + * Free List Buffer alignment is 32 bytes, this works out for us ... + */ +enum { + RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */ + RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */ + RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */ + + /* + * XXX We shouldn't depend on being able to use these indices. + * XXX Especially when some other Master PF has initialized the + * XXX adapter or we use the Firmware Configuration File. We + * XXX should really search through the Host Buffer Size register + * XXX array for the appropriately sized buffer indices. + */ + RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */ + RX_LARGE_PG_BUF = 0x1, /* buffer large page buffer */ + + RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */ + RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */ +}; + +/** + * t4_sge_init - initialize SGE + * @adap: the adapter + * + * Performs SGE initialization needed every time after a chip reset. + * We do not initialize any of the queues here, instead the driver + * top-level must request those individually. + * + * Called in two different modes: + * + * 1. Perform actual hardware initialization and record hard-coded + * parameters which were used. This gets used when we're the + * Master PF and the Firmware Configuration File support didn't + * work for some reason. + * + * 2. We're not the Master PF or initialization was performed with + * a Firmware Configuration File. In this case we need to grab + * any of the SGE operating parameters that we need to have in + * order to do our job and make sure we can live with them ... + */ +static int t4_sge_init_soft(struct adapter *adap) +{ + struct sge *s = &adap->sge; + u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu; + u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5; + u32 ingress_rx_threshold; + + /* + * Verify that CPL messages are going to the Ingress Queue for + * process_responses() and that only packet data is going to the + * Free Lists. + */ + if ((t4_read_reg(adap, A_SGE_CONTROL) & F_RXPKTCPLMODE) != + V_RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) { + dev_err(adap, "bad SGE CPL MODE\n"); + return -EINVAL; + } + + /* + * Validate the Host Buffer Register Array indices that we want to + * use ... + * + * XXX Note that we should really read through the Host Buffer Size + * XXX register array and find the indices of the Buffer Sizes which + * XXX meet our needs! + */ +#define READ_FL_BUF(x) \ + t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE0 + (x) * sizeof(u32)) + + fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF); + fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF); + fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF); + fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF); + + /* + * We only bother using the Large Page logic if the Large Page Buffer + * is larger than our Page Size Buffer. + */ + if (fl_large_pg <= fl_small_pg) + fl_large_pg = 0; + +#undef READ_FL_BUF + + /* + * The Page Size Buffer must be exactly equal to our Page Size and the + * Large Page Size Buffer should be 0 (per above) or a power of 2. + */ + if (fl_small_pg != PAGE_SIZE || + (fl_large_pg & (fl_large_pg - 1)) != 0) { + dev_err(adap, "bad SGE FL page buffer sizes [%d, %d]\n", + fl_small_pg, fl_large_pg); + return -EINVAL; + } + if (fl_large_pg) + s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT; + + if (adap->use_unpacked_mode) { + int err = 0; + + if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap)) { + dev_err(adap, "bad SGE FL small MTU %d\n", + fl_small_mtu); + err = -EINVAL; + } + if (fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) { + dev_err(adap, "bad SGE FL large MTU %d\n", + fl_large_mtu); + err = -EINVAL; + } + if (err) + return err; + } + + /* + * Retrieve our RX interrupt holdoff timer values and counter + * threshold values from the SGE parameters. + */ + timer_value_0_and_1 = t4_read_reg(adap, A_SGE_TIMER_VALUE_0_AND_1); + timer_value_2_and_3 = t4_read_reg(adap, A_SGE_TIMER_VALUE_2_AND_3); + timer_value_4_and_5 = t4_read_reg(adap, A_SGE_TIMER_VALUE_4_AND_5); + s->timer_val[0] = core_ticks_to_us(adap, + G_TIMERVALUE0(timer_value_0_and_1)); + s->timer_val[1] = core_ticks_to_us(adap, + G_TIMERVALUE1(timer_value_0_and_1)); + s->timer_val[2] = core_ticks_to_us(adap, + G_TIMERVALUE2(timer_value_2_and_3)); + s->timer_val[3] = core_ticks_to_us(adap, + G_TIMERVALUE3(timer_value_2_and_3)); + s->timer_val[4] = core_ticks_to_us(adap, + G_TIMERVALUE4(timer_value_4_and_5)); + s->timer_val[5] = core_ticks_to_us(adap, + G_TIMERVALUE5(timer_value_4_and_5)); + + ingress_rx_threshold = t4_read_reg(adap, A_SGE_INGRESS_RX_THRESHOLD); + s->counter_val[0] = G_THRESHOLD_0(ingress_rx_threshold); + s->counter_val[1] = G_THRESHOLD_1(ingress_rx_threshold); + s->counter_val[2] = G_THRESHOLD_2(ingress_rx_threshold); + s->counter_val[3] = G_THRESHOLD_3(ingress_rx_threshold); + + return 0; +} + +int t4_sge_init(struct adapter *adap) +{ + struct sge *s = &adap->sge; + u32 sge_control, sge_control2, sge_conm_ctrl; + unsigned int ingpadboundary, ingpackboundary; + int ret, egress_threshold; + + /* + * Ingress Padding Boundary and Egress Status Page Size are set up by + * t4_fixup_host_params(). + */ + sge_control = t4_read_reg(adap, A_SGE_CONTROL); + s->pktshift = G_PKTSHIFT(sge_control); + s->stat_len = (sge_control & F_EGRSTATUSPAGESIZE) ? 128 : 64; + + /* + * T4 uses a single control field to specify both the PCIe Padding and + * Packing Boundary. T5 introduced the ability to specify these + * separately. The actual Ingress Packet Data alignment boundary + * within Packed Buffer Mode is the maximum of these two + * specifications. + */ + ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) + + X_INGPADBOUNDARY_SHIFT); + s->fl_align = ingpadboundary; + + if (!is_t4(adap->params.chip) && !adap->use_unpacked_mode) { + /* + * T5 has a weird interpretation of one of the PCIe Packing + * Boundary values. No idea why ... + */ + sge_control2 = t4_read_reg(adap, A_SGE_CONTROL2); + ingpackboundary = G_INGPACKBOUNDARY(sge_control2); + if (ingpackboundary == X_INGPACKBOUNDARY_16B) + ingpackboundary = 16; + else + ingpackboundary = 1 << (ingpackboundary + + X_INGPACKBOUNDARY_SHIFT); + + s->fl_align = max(ingpadboundary, ingpackboundary); + } + + ret = t4_sge_init_soft(adap); + if (ret < 0) { + dev_err(adap, "%s: t4_sge_init_soft failed, error %d\n", + __func__, -ret); + return ret; + } + + /* + * A FL with <= fl_starve_thres buffers is starving and a periodic + * timer will attempt to refill it. This needs to be larger than the + * SGE's Egress Congestion Threshold. If it isn't, then we can get + * stuck waiting for new packets while the SGE is waiting for us to + * give it more Free List entries. (Note that the SGE's Egress + * Congestion Threshold is in units of 2 Free List pointers.) For T4, + * there was only a single field to control this. For T5 there's the + * original field which now only applies to Unpacked Mode Free List + * buffers and a new field which only applies to Packed Mode Free List + * buffers. + */ + sge_conm_ctrl = t4_read_reg(adap, A_SGE_CONM_CTRL); + if (is_t4(adap->params.chip) || adap->use_unpacked_mode) + egress_threshold = G_EGRTHRESHOLD(sge_conm_ctrl); + else + egress_threshold = G_EGRTHRESHOLDPACKING(sge_conm_ctrl); + s->fl_starve_thres = 2 * egress_threshold + 1; + + return 0; +} diff --git a/mk/rte.app.mk b/mk/rte.app.mk index 0d6c14a776..ad6f633b36 100644 --- a/mk/rte.app.mk +++ b/mk/rte.app.mk @@ -126,6 +126,7 @@ ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n) _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio _LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio +_LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k -- 2.20.1