From 8eecb3295aed0a979def52245564d03be172a83c Mon Sep 17 00:00:00 2001 From: Vlad Zolotarov Date: Mon, 30 Mar 2015 22:21:11 +0300 Subject: [PATCH] ixgbe: add LRO support - Only x540 and 82599 devices support LRO. - Add the appropriate HW configuration. - Add RSC aware rx_pkt_burst() handlers: - Implemented bulk allocation and non-bulk allocation versions. - Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data and to ixgbe_rx_queue. - Use the appropriate handler when LRO is requested. Signed-off-by: Vlad Zolotarov Acked-by: Konstantin Ananyev --- lib/librte_ether/rte_ethdev.h | 9 +- lib/librte_net/rte_ip.h | 3 + lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 11 + lib/librte_pmd_ixgbe/ixgbe_ethdev.h | 13 + lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 610 +++++++++++++++++++++++++++- lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 6 + 6 files changed, 644 insertions(+), 8 deletions(-) diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 46a55ff999..4648290833 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -172,6 +172,9 @@ extern "C" { #include +/* Use this macro to check if LRO API is supported */ +#define RTE_ETHDEV_HAS_LRO_SUPPORT + #include #include #include @@ -320,14 +323,15 @@ struct rte_eth_rxmode { enum rte_eth_rx_mq_mode mq_mode; uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */ uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ - uint8_t header_split : 1, /**< Header Split enable. */ + uint16_t header_split : 1, /**< Header Split enable. */ hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */ hw_vlan_filter : 1, /**< VLAN filter enable. */ hw_vlan_strip : 1, /**< VLAN strip enable. */ hw_vlan_extend : 1, /**< Extended VLAN enable. */ jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */ hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */ - enable_scatter : 1; /**< Enable scatter packets rx handler */ + enable_scatter : 1, /**< Enable scatter packets rx handler */ + enable_lro : 1; /**< Enable LRO */ }; /** @@ -1537,6 +1541,7 @@ struct rte_eth_dev_data { uint8_t port_id; /**< Device [external] port identifier. */ uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */ scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */ + lro : 1, /**< RX LRO is ON(1) / OFF(0) */ all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */ dev_started : 1; /**< Device state: STARTED(1) / STOPPED(0). */ }; diff --git a/lib/librte_net/rte_ip.h b/lib/librte_net/rte_ip.h index 64935d9fd8..74c9ced280 100644 --- a/lib/librte_net/rte_ip.h +++ b/lib/librte_net/rte_ip.h @@ -110,6 +110,9 @@ struct ipv4_hdr { (((c) & 0xff) << 8) | \ ((d) & 0xff)) +/** Maximal IPv4 packet length (including a header) */ +#define IPV4_MAX_PKT_LEN 65535 + /** Internet header length mask for version_ihl field */ #define IPV4_HDR_IHL_MASK (0x0f) /** diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c index a7ac8663ab..1b3b4b5ec2 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c @@ -1644,6 +1644,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev) /* Clear stored conf */ dev->data->scattered_rx = 0; + dev->data->lro = 0; /* Clear recorded link status */ memset(&link, 0, sizeof(link)); @@ -2012,6 +2013,16 @@ ixgbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info) DEV_RX_OFFLOAD_IPV4_CKSUM | DEV_RX_OFFLOAD_UDP_CKSUM | DEV_RX_OFFLOAD_TCP_CKSUM; + + /* + * RSC is only supported by 82599 and x540 PF devices in a non-SR-IOV + * mode. + */ + if ((hw->mac.type == ixgbe_mac_82599EB || + hw->mac.type == ixgbe_mac_X540) && + !RTE_ETH_DEV_SRIOV(dev).active) + dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_TCP_LRO; + dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT | DEV_TX_OFFLOAD_IPV4_CKSUM | diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h index ffe3471bcd..e45e727d84 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h @@ -62,6 +62,14 @@ #endif #define IXGBE_HWSTRIP_BITMAP_SIZE (IXGBE_MAX_RX_QUEUE_NUM / (sizeof(uint32_t) * NBBY)) +/* EITR Inteval is in 2048ns uinits for 1G and 10G link */ +#define IXGBE_EITR_INTERVAL_UNIT_NS 2048 +#define IXGBE_EITR_ITR_INT_SHIFT 3 +#define IXGBE_EITR_INTERVAL_US(us) \ + (((us) * 1000 / IXGBE_EITR_INTERVAL_UNIT_NS << IXGBE_EITR_ITR_INT_SHIFT) & \ + IXGBE_EITR_ITR_INT_MASK) + + /* Loopback operation modes */ /* 82599 specific loopback operation types */ #define IXGBE_LPBK_82599_NONE 0x0 /* Default value. Loopback is disabled. */ @@ -344,6 +352,11 @@ uint16_t ixgbe_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t ixgbe_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts); +uint16_t ixgbe_recv_pkts_lro_single_alloc(void *rx_queue, + struct rte_mbuf **rx_pkts, uint16_t nb_pkts); +uint16_t ixgbe_recv_pkts_lro_bulk_alloc(void *rx_queue, + struct rte_mbuf **rx_pkts, uint16_t nb_pkts); + uint16_t ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts); diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c index c2bcecbdb8..f1da9ec608 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c @@ -70,6 +70,7 @@ #include #include #include +#include #include "ixgbe_logs.h" #include "ixgbe/ixgbe_api.h" @@ -1432,6 +1433,295 @@ ixgbe_fill_cluster_head_buf( } } +/** + * ixgbe_recv_pkts_lro - receive handler for and LRO case. + * + * @rx_queue Rx queue handle + * @rx_pkts table of received packets + * @nb_pkts size of rx_pkts table + * @bulk_alloc if TRUE bulk allocation is used for a HW ring refilling + * + * Handles the Rx HW ring completions when RSC feature is configured. Uses an + * additional ring of ixgbe_rsc_entry's that will hold the relevant RSC info. + * + * We use the same logic as in Linux and in FreeBSD ixgbe drivers: + * 1) When non-EOP RSC completion arrives: + * a) Update the HEAD of the current RSC aggregation cluster with the new + * segment's data length. + * b) Set the "next" pointer of the current segment to point to the segment + * at the NEXTP index. + * c) Pass the HEAD of RSC aggregation cluster on to the next NEXTP entry + * in the sw_rsc_ring. + * 2) When EOP arrives we just update the cluster's total length and offload + * flags and deliver the cluster up to the upper layers. In our case - put it + * in the rx_pkts table. + * + * Returns the number of received packets/clusters (according to the "bulk + * receive" interface). + */ +static inline uint16_t +ixgbe_recv_pkts_lro(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts, + bool bulk_alloc) +{ + struct ixgbe_rx_queue *rxq = rx_queue; + volatile union ixgbe_adv_rx_desc *rx_ring = rxq->rx_ring; + struct ixgbe_rx_entry *sw_ring = rxq->sw_ring; + struct ixgbe_rsc_entry *sw_rsc_ring = rxq->sw_rsc_ring; + uint16_t rx_id = rxq->rx_tail; + uint16_t nb_rx = 0; + uint16_t nb_hold = rxq->nb_rx_hold; + uint16_t prev_id = rxq->rx_tail; + + while (nb_rx < nb_pkts) { + bool eop; + struct ixgbe_rx_entry *rxe; + struct ixgbe_rsc_entry *rsc_entry; + struct ixgbe_rsc_entry *next_rsc_entry; + struct ixgbe_rx_entry *next_rxe; + struct rte_mbuf *first_seg; + struct rte_mbuf *rxm; + struct rte_mbuf *nmb; + union ixgbe_adv_rx_desc rxd; + uint16_t data_len; + uint16_t next_id; + volatile union ixgbe_adv_rx_desc *rxdp; + uint32_t staterr; + +next_desc: + /* + * The code in this whole file uses the volatile pointer to + * ensure the read ordering of the status and the rest of the + * descriptor fields (on the compiler level only!!!). This is so + * UGLY - why not to just use the compiler barrier instead? DPDK + * even has the rte_compiler_barrier() for that. + * + * But most importantly this is just wrong because this doesn't + * ensure memory ordering in a general case at all. For + * instance, DPDK is supposed to work on Power CPUs where + * compiler barrier may just not be enough! + * + * I tried to write only this function properly to have a + * starting point (as a part of an LRO/RSC series) but the + * compiler cursed at me when I tried to cast away the + * "volatile" from rx_ring (yes, it's volatile too!!!). So, I'm + * keeping it the way it is for now. + * + * The code in this file is broken in so many other places and + * will just not work on a big endian CPU anyway therefore the + * lines below will have to be revisited together with the rest + * of the ixgbe PMD. + * + * TODO: + * - Get rid of "volatile" crap and let the compiler do its + * job. + * - Use the proper memory barrier (rte_rmb()) to ensure the + * memory ordering below. + */ + rxdp = &rx_ring[rx_id]; + staterr = rte_le_to_cpu_32(rxdp->wb.upper.status_error); + + if (!(staterr & IXGBE_RXDADV_STAT_DD)) + break; + + rxd = *rxdp; + + PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_id=%u " + "staterr=0x%x data_len=%u", + rxq->port_id, rxq->queue_id, rx_id, staterr, + rte_le_to_cpu_16(rxd.wb.upper.length)); + + if (!bulk_alloc) { + nmb = rte_rxmbuf_alloc(rxq->mb_pool); + if (nmb == NULL) { + PMD_RX_LOG(DEBUG, "RX mbuf alloc failed " + "port_id=%u queue_id=%u", + rxq->port_id, rxq->queue_id); + + rte_eth_devices[rxq->port_id].data-> + rx_mbuf_alloc_failed++; + break; + } + } else if (nb_hold > rxq->rx_free_thresh) { + uint16_t next_rdt = rxq->rx_free_trigger; + + if (!ixgbe_rx_alloc_bufs(rxq, false)) { + rte_wmb(); + IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, + next_rdt); + nb_hold -= rxq->rx_free_thresh; + } else { + PMD_RX_LOG(DEBUG, "RX bulk alloc failed " + "port_id=%u queue_id=%u", + rxq->port_id, rxq->queue_id); + + rte_eth_devices[rxq->port_id].data-> + rx_mbuf_alloc_failed++; + break; + } + } + + nb_hold++; + rxe = &sw_ring[rx_id]; + eop = staterr & IXGBE_RXDADV_STAT_EOP; + + next_id = rx_id + 1; + if (next_id == rxq->nb_rx_desc) + next_id = 0; + + /* Prefetch next mbuf while processing current one. */ + rte_ixgbe_prefetch(sw_ring[next_id].mbuf); + + /* + * When next RX descriptor is on a cache-line boundary, + * prefetch the next 4 RX descriptors and the next 4 pointers + * to mbufs. + */ + if ((next_id & 0x3) == 0) { + rte_ixgbe_prefetch(&rx_ring[next_id]); + rte_ixgbe_prefetch(&sw_ring[next_id]); + } + + rxm = rxe->mbuf; + + if (!bulk_alloc) { + __le64 dma = + rte_cpu_to_le_64(RTE_MBUF_DATA_DMA_ADDR_DEFAULT(nmb)); + /* + * Update RX descriptor with the physical address of the + * new data buffer of the new allocated mbuf. + */ + rxe->mbuf = nmb; + + rxm->data_off = RTE_PKTMBUF_HEADROOM; + rxdp->read.hdr_addr = dma; + rxdp->read.pkt_addr = dma; + } else + rxe->mbuf = NULL; + + /* + * Set data length & data buffer address of mbuf. + */ + data_len = rte_le_to_cpu_16(rxd.wb.upper.length); + rxm->data_len = data_len; + + if (!eop) { + uint16_t nextp_id; + /* + * Get next descriptor index: + * - For RSC it's in the NEXTP field. + * - For a scattered packet - it's just a following + * descriptor. + */ + if (ixgbe_rsc_count(&rxd)) + nextp_id = + (staterr & IXGBE_RXDADV_NEXTP_MASK) >> + IXGBE_RXDADV_NEXTP_SHIFT; + else + nextp_id = next_id; + + next_rsc_entry = &sw_rsc_ring[nextp_id]; + next_rxe = &sw_ring[nextp_id]; + rte_ixgbe_prefetch(next_rxe); + } + + rsc_entry = &sw_rsc_ring[rx_id]; + first_seg = rsc_entry->fbuf; + rsc_entry->fbuf = NULL; + + /* + * If this is the first buffer of the received packet, + * set the pointer to the first mbuf of the packet and + * initialize its context. + * Otherwise, update the total length and the number of segments + * of the current scattered packet, and update the pointer to + * the last mbuf of the current packet. + */ + if (first_seg == NULL) { + first_seg = rxm; + first_seg->pkt_len = data_len; + first_seg->nb_segs = 1; + } else { + first_seg->pkt_len += data_len; + first_seg->nb_segs++; + } + + prev_id = rx_id; + rx_id = next_id; + + /* + * If this is not the last buffer of the received packet, update + * the pointer to the first mbuf at the NEXTP entry in the + * sw_rsc_ring and continue to parse the RX ring. + */ + if (!eop) { + rxm->next = next_rxe->mbuf; + next_rsc_entry->fbuf = first_seg; + goto next_desc; + } + + /* + * This is the last buffer of the received packet - return + * the current cluster to the user. + */ + rxm->next = NULL; + + /* Initialize the first mbuf of the returned packet */ + ixgbe_fill_cluster_head_buf(first_seg, &rxd, rxq->port_id, + staterr); + + /* Prefetch data of first segment, if configured to do so. */ + rte_packet_prefetch((char *)first_seg->buf_addr + + first_seg->data_off); + + /* + * Store the mbuf address into the next entry of the array + * of returned packets. + */ + rx_pkts[nb_rx++] = first_seg; + } + + /* + * Record index of the next RX descriptor to probe. + */ + rxq->rx_tail = rx_id; + + /* + * If the number of free RX descriptors is greater than the RX free + * threshold of the queue, advance the Receive Descriptor Tail (RDT) + * register. + * Update the RDT with the value of the last processed RX descriptor + * minus 1, to guarantee that the RDT register is never equal to the + * RDH register, which creates a "full" ring situtation from the + * hardware point of view... + */ + if (!bulk_alloc && nb_hold > rxq->rx_free_thresh) { + PMD_RX_LOG(DEBUG, "port_id=%u queue_id=%u rx_tail=%u " + "nb_hold=%u nb_rx=%u", + rxq->port_id, rxq->queue_id, rx_id, nb_hold, nb_rx); + + rte_wmb(); + IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, prev_id); + nb_hold = 0; + } + + rxq->nb_rx_hold = nb_hold; + return nb_rx; +} + +uint16_t +ixgbe_recv_pkts_lro_single_alloc(void *rx_queue, struct rte_mbuf **rx_pkts, + uint16_t nb_pkts) +{ + return ixgbe_recv_pkts_lro(rx_queue, rx_pkts, nb_pkts, false); +} + +uint16_t +ixgbe_recv_pkts_lro_bulk_alloc(void *rx_queue, struct rte_mbuf **rx_pkts, + uint16_t nb_pkts) +{ + return ixgbe_recv_pkts_lro(rx_queue, rx_pkts, nb_pkts, true); +} + uint16_t ixgbe_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts) @@ -2015,6 +2305,31 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, return (0); } +/** + * ixgbe_free_rsc_cluster - free the not-yet-completed RSC cluster + * + * The "next" pointer of the last segment of (not-yet-completed) RSC clusters + * in the sw_rsc_ring is not set to NULL but rather points to the next + * mbuf of this RSC aggregation (that has not been completed yet and still + * resides on the HW ring). So, instead of calling for rte_pktmbuf_free() we + * will just free first "nb_segs" segments of the cluster explicitly by calling + * an rte_pktmbuf_free_seg(). + * + * @m RSC cluster head + */ +static void +ixgbe_free_rsc_cluster(struct rte_mbuf *m) +{ + uint8_t i, nb_segs = m->nb_segs; + struct rte_mbuf *next_seg; + + for (i = 0; i < nb_segs; i++) { + next_seg = m->next; + rte_pktmbuf_free_seg(m); + m = next_seg; + } +} + static void ixgbe_rx_queue_release_mbufs(struct ixgbe_rx_queue *rxq) { @@ -2038,6 +2353,13 @@ ixgbe_rx_queue_release_mbufs(struct ixgbe_rx_queue *rxq) } #endif } + + if (rxq->sw_rsc_ring) + for (i = 0; i < rxq->nb_rx_desc; i++) + if (rxq->sw_rsc_ring[i].fbuf) { + ixgbe_free_rsc_cluster(rxq->sw_rsc_ring[i].fbuf); + rxq->sw_rsc_ring[i].fbuf = NULL; + } } static void @@ -2046,6 +2368,7 @@ ixgbe_rx_queue_release(struct ixgbe_rx_queue *rxq) if (rxq != NULL) { ixgbe_rx_queue_release_mbufs(rxq); rte_free(rxq->sw_ring); + rte_free(rxq->sw_rsc_ring); rte_free(rxq); } } @@ -2168,6 +2491,7 @@ ixgbe_reset_rx_queue(struct ixgbe_hw *hw, struct ixgbe_rx_queue *rxq) rxq->nb_rx_hold = 0; rxq->pkt_first_seg = NULL; rxq->pkt_last_seg = NULL; + rxq->rsc_en = 0; } int @@ -2182,6 +2506,14 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev, struct ixgbe_rx_queue *rxq; struct ixgbe_hw *hw; uint16_t len; + struct rte_eth_dev_info dev_info = { 0 }; + struct rte_eth_rxmode *dev_rx_mode = &dev->data->dev_conf.rxmode; + bool rsc_requested = false; + + dev->dev_ops->dev_infos_get(dev, &dev_info); + if ((dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_LRO) && + dev_rx_mode->enable_lro) + rsc_requested = true; PMD_INIT_FUNC_TRACE(); hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); @@ -2287,12 +2619,27 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev, rxq->sw_ring = rte_zmalloc_socket("rxq->sw_ring", sizeof(struct ixgbe_rx_entry) * len, RTE_CACHE_LINE_SIZE, socket_id); - if (rxq->sw_ring == NULL) { + if (!rxq->sw_ring) { ixgbe_rx_queue_release(rxq); return (-ENOMEM); } - PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64, - rxq->sw_ring, rxq->rx_ring, rxq->rx_ring_phys_addr); + + if (rsc_requested) { + rxq->sw_rsc_ring = + rte_zmalloc_socket("rxq->sw_rsc_ring", + sizeof(struct ixgbe_rsc_entry) * len, + RTE_CACHE_LINE_SIZE, socket_id); + if (!rxq->sw_rsc_ring) { + ixgbe_rx_queue_release(rxq); + return (-ENOMEM); + } + } else + rxq->sw_rsc_ring = NULL; + + PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_rsc_ring=%p hw_ring=%p " + "dma_addr=0x%"PRIx64, + rxq->sw_ring, rxq->sw_rsc_ring, rxq->rx_ring, + rxq->rx_ring_phys_addr); if (!rte_is_power_of_2(nb_desc)) { PMD_INIT_LOG(DEBUG, "queue[%d] doesn't meet Vector Rx " @@ -3537,6 +3884,91 @@ ixgbe_dev_mq_tx_configure(struct rte_eth_dev *dev) return 0; } +/** + * ixgbe_get_rscctl_maxdesc - Calculate the RSCCTL[n].MAXDESC for PF + * + * Return the RSCCTL[n].MAXDESC for 82599 and x540 PF devices according to the + * spec rev. 3.0 chapter 8.2.3.8.13. + * + * @pool Memory pool of the Rx queue + */ +static inline uint32_t +ixgbe_get_rscctl_maxdesc(struct rte_mempool *pool) +{ + struct rte_pktmbuf_pool_private *mp_priv = rte_mempool_get_priv(pool); + + /* MAXDESC * SRRCTL.BSIZEPKT must not exceed 64 KB minus one */ + uint16_t maxdesc = + IPV4_MAX_PKT_LEN / + (mp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM); + + if (maxdesc >= 16) + return IXGBE_RSCCTL_MAXDESC_16; + else if (maxdesc >= 8) + return IXGBE_RSCCTL_MAXDESC_8; + else if (maxdesc >= 4) + return IXGBE_RSCCTL_MAXDESC_4; + else + return IXGBE_RSCCTL_MAXDESC_1; +} + +/** + * ixgbe_set_ivar - Setup the correct IVAR register for a particular MSIX + * interrupt + * + * (Taken from FreeBSD tree) + * (yes this is all very magic and confusing :) + * + * @dev port handle + * @entry the register array entry + * @vector the MSIX vector for this queue + * @type RX/TX/MISC + */ +static void +ixgbe_set_ivar(struct rte_eth_dev *dev, u8 entry, u8 vector, s8 type) +{ + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + u32 ivar, index; + + vector |= IXGBE_IVAR_ALLOC_VAL; + + switch (hw->mac.type) { + + case ixgbe_mac_82598EB: + if (type == -1) + entry = IXGBE_IVAR_OTHER_CAUSES_INDEX; + else + entry += (type * 64); + index = (entry >> 2) & 0x1F; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); + ivar &= ~(0xFF << (8 * (entry & 0x3))); + ivar |= (vector << (8 * (entry & 0x3))); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); + break; + + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + if (type == -1) { /* MISC IVAR */ + index = (entry & 1) * 8; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC); + ivar &= ~(0xFF << index); + ivar |= (vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar); + } else { /* RX/TX IVARS */ + index = (16 * (entry & 1)) + (8 * type); + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1)); + ivar &= ~(0xFF << index); + ivar |= (vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar); + } + + break; + + default: + break; + } +} + void ixgbe_set_rx_function(struct rte_eth_dev *dev) { struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); @@ -3555,7 +3987,24 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev) hw->rx_vec_allowed = false; } - if (dev->data->scattered_rx) { + /* + * Initialize the appropriate LRO callback. + * + * If all queues satisfy the bulk allocation preconditions + * (hw->rx_bulk_alloc_allowed is TRUE) then we may use bulk allocation. + * Otherwise use a single allocation version. + */ + if (dev->data->lro) { + if (hw->rx_bulk_alloc_allowed) { + PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk " + "allocation version"); + dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc; + } else { + PMD_INIT_LOG(INFO, "LRO is requested. Using a single " + "allocation version"); + dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc; + } + } else if (dev->data->scattered_rx) { /* * Set the non-LRO scattered callback: there are Vector and * single allocation versions. @@ -3605,6 +4054,149 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev) } } +/** + * ixgbe_set_rsc - configure RSC related port HW registers + * + * Configures the port's RSC related registers according to the 4.6.7.2 chapter + * of 82599 Spec (x540 configuration is virtually the same). + * + * @dev port handle + * + * Returns 0 in case of success or a non-zero error code + */ +static int +ixgbe_set_rsc(struct rte_eth_dev *dev) +{ + struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode; + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + struct rte_eth_dev_info dev_info = { 0 }; + bool rsc_capable = false; + uint16_t i; + uint32_t rdrxctl; + + /* Sanity check */ + dev->dev_ops->dev_infos_get(dev, &dev_info); + if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_LRO) + rsc_capable = true; + + if (!rsc_capable && rx_conf->enable_lro) { + PMD_INIT_LOG(CRIT, "LRO is requested on HW that doesn't " + "support it"); + return -EINVAL; + } + + /* RSC global configuration (chapter 4.6.7.2.1 of 82599 Spec) */ + + if (!rx_conf->hw_strip_crc && rx_conf->enable_lro) { + /* + * According to chapter of 4.6.7.2.1 of the Spec Rev. + * 3.0 RSC configuration requires HW CRC stripping being + * enabled. If user requested both HW CRC stripping off + * and RSC on - return an error. + */ + PMD_INIT_LOG(CRIT, "LRO can't be enabled when HW CRC " + "is disabled"); + return -EINVAL; + } + + /* RFCTL configuration */ + if (rsc_capable) { + uint32_t rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL); + if (rx_conf->enable_lro) + /* + * Since NFS packets coalescing is not supported - clear + * RFCTL.NFSW_DIS and RFCTL.NFSR_DIS when RSC is + * enabled. + */ + rfctl &= ~(IXGBE_RFCTL_RSC_DIS | IXGBE_RFCTL_NFSW_DIS | + IXGBE_RFCTL_NFSR_DIS); + else + rfctl |= IXGBE_RFCTL_RSC_DIS; + + IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl); + } + + /* If LRO hasn't been requested - we are done here. */ + if (!rx_conf->enable_lro) + return 0; + + /* Set RDRXCTL.RSCACKC bit */ + rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + rdrxctl |= IXGBE_RDRXCTL_RSCACKC; + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); + + /* Per-queue RSC configuration (chapter 4.6.7.2.2 of 82599 Spec) */ + for (i = 0; i < dev->data->nb_rx_queues; i++) { + struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i]; + uint32_t srrctl = + IXGBE_READ_REG(hw, IXGBE_SRRCTL(rxq->reg_idx)); + uint32_t rscctl = + IXGBE_READ_REG(hw, IXGBE_RSCCTL(rxq->reg_idx)); + uint32_t psrtype = + IXGBE_READ_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx)); + uint32_t eitr = + IXGBE_READ_REG(hw, IXGBE_EITR(rxq->reg_idx)); + + /* + * ixgbe PMD doesn't support header-split at the moment. + * + * Following the 4.6.7.2.1 chapter of the 82599/x540 + * Spec if RSC is enabled the SRRCTL[n].BSIZEHEADER + * should be configured even if header split is not + * enabled. We will configure it 128 bytes following the + * recommendation in the spec. + */ + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; + srrctl |= (128 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & + IXGBE_SRRCTL_BSIZEHDR_MASK; + + /* + * TODO: Consider setting the Receive Descriptor Minimum + * Threshold Size for an RSC case. This is not an obviously + * beneficiary option but the one worth considering... + */ + + rscctl |= IXGBE_RSCCTL_RSCEN; + rscctl |= ixgbe_get_rscctl_maxdesc(rxq->mb_pool); + psrtype |= IXGBE_PSRTYPE_TCPHDR; + + /* + * RSC: Set ITR interval corresponding to 2K ints/s. + * + * Full-sized RSC aggregations for a 10Gb/s link will + * arrive at about 20K aggregation/s rate. + * + * 2K inst/s rate will make only 10% of the + * aggregations to be closed due to the interrupt timer + * expiration for a streaming at wire-speed case. + * + * For a sparse streaming case this setting will yield + * at most 500us latency for a single RSC aggregation. + */ + eitr &= ~IXGBE_EITR_ITR_INT_MASK; + eitr |= IXGBE_EITR_INTERVAL_US(500) | IXGBE_EITR_CNT_WDIS; + + IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxq->reg_idx), srrctl); + IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(rxq->reg_idx), rscctl); + IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(rxq->reg_idx), psrtype); + IXGBE_WRITE_REG(hw, IXGBE_EITR(rxq->reg_idx), eitr); + + /* + * RSC requires the mapping of the queue to the + * interrupt vector. + */ + ixgbe_set_ivar(dev, rxq->reg_idx, i, 0); + + rxq->rsc_en = 1; + } + + dev->data->lro = 1; + + PMD_INIT_LOG(INFO, "enabling LRO mode"); + + return 0; +} + /* * Initializes Receive Unit. */ @@ -3625,6 +4217,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev) uint16_t buf_size; uint16_t i; struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode; + int rc; PMD_INIT_FUNC_TRACE(); hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); @@ -3734,6 +4327,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev) RTE_PKTMBUF_HEADROOM); srrctl |= ((buf_size >> IXGBE_SRRCTL_BSIZEPKT_SHIFT) & IXGBE_SRRCTL_BSIZEPKT_MASK); + IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxq->reg_idx), srrctl); buf_size = (uint16_t) ((srrctl & IXGBE_SRRCTL_BSIZEPKT_MASK) << @@ -3748,8 +4342,6 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev) if (rx_conf->enable_scatter) dev->data->scattered_rx = 1; - ixgbe_set_rx_function(dev); - /* * Device configured with multiple RX queues. */ @@ -3780,6 +4372,12 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev) IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); } + rc = ixgbe_set_rsc(dev); + if (rc) + return rc; + + ixgbe_set_rx_function(dev); + return 0; } diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h index 0d549a0697..4d77042c30 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h @@ -79,6 +79,10 @@ struct ixgbe_rx_entry { struct rte_mbuf *mbuf; /**< mbuf associated with RX descriptor. */ }; +struct ixgbe_rsc_entry { + struct rte_mbuf *fbuf; /**< First segment of the fragmented packet. */ +}; + /** * Structure associated with each descriptor of the TX ring of a TX queue. */ @@ -105,6 +109,7 @@ struct ixgbe_rx_queue { volatile uint32_t *rdt_reg_addr; /**< RDT register address. */ volatile uint32_t *rdh_reg_addr; /**< RDH register address. */ struct ixgbe_rx_entry *sw_ring; /**< address of RX software ring. */ + struct ixgbe_rsc_entry *sw_rsc_ring; /**< address of RSC software ring. */ struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */ struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */ uint64_t mbuf_initializer; /**< value to init mbufs */ @@ -126,6 +131,7 @@ struct ixgbe_rx_queue { uint8_t port_id; /**< Device port identifier. */ uint8_t crc_len; /**< 0 if CRC stripped, 4 otherwise. */ uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */ + uint8_t rsc_en; /**< If not 0, RSC is enabled. */ uint8_t rx_deferred_start; /**< not in global dev start. */ #ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC /** need to alloc dummy mbuf, for wraparound when scanning hw ring */ -- 2.20.1