From 9dfc06c26a8bdfd85a448b093b96ed10cf0cdf40 Mon Sep 17 00:00:00 2001 From: Konstantin Ananyev Date: Thu, 10 May 2018 11:23:09 +0100 Subject: [PATCH] test/bpf: add samples Add few simple eBPF programs as an example. Signed-off-by: Konstantin Ananyev Acked-by: Ferruh Yigit --- MAINTAINERS | 1 + test/bpf/dummy.c | 20 ++ test/bpf/mbuf.h | 578 +++++++++++++++++++++++++++++++++++++++++++++++ test/bpf/t1.c | 52 +++++ test/bpf/t2.c | 31 +++ test/bpf/t3.c | 36 +++ 6 files changed, 718 insertions(+) create mode 100644 test/bpf/dummy.c create mode 100644 test/bpf/mbuf.h create mode 100644 test/bpf/t1.c create mode 100644 test/bpf/t2.c create mode 100644 test/bpf/t3.c diff --git a/MAINTAINERS b/MAINTAINERS index 8b4972ec32..e8556e4e65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1103,6 +1103,7 @@ F: lib/librte_latencystats/ BPF M: Konstantin Ananyev F: lib/librte_bpf/ +F: test/bpf/ Test Applications diff --git a/test/bpf/dummy.c b/test/bpf/dummy.c new file mode 100644 index 0000000000..5851469e79 --- /dev/null +++ b/test/bpf/dummy.c @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 Intel Corporation + */ + +/* + * eBPF program sample. + * does nothing always return success. + * used to measure BPF infrastructure overhead. + * To compile: + * clang -O2 -target bpf -c dummy.c + */ + +#include +#include + +uint64_t +entry(void *arg) +{ + return 1; +} diff --git a/test/bpf/mbuf.h b/test/bpf/mbuf.h new file mode 100644 index 0000000000..f24f908d72 --- /dev/null +++ b/test/bpf/mbuf.h @@ -0,0 +1,578 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2010-2014 Intel Corporation. + * Copyright 2014 6WIND S.A. + */ + +/* + * Snipper from dpdk.org rte_mbuf.h. + * used to provide BPF programs information about rte_mbuf layout. + */ + +#ifndef _MBUF_H_ +#define _MBUF_H_ + +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Packet Offload Features Flags. It also carry packet type information. + * Critical resources. Both rx/tx shared these bits. Be cautious on any change + * + * - RX flags start at bit position zero, and get added to the left of previous + * flags. + * - The most-significant 3 bits are reserved for generic mbuf flags + * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get + * added to the right of the previously defined flags i.e. they should count + * downwards, not upwards. + * + * Keep these flags synchronized with rte_get_rx_ol_flag_name() and + * rte_get_tx_ol_flag_name(). + */ + +/** + * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when + * the packet is recognized as a VLAN, but the behavior between PMDs + * was not the same. This flag is kept for some time to avoid breaking + * applications and should be replaced by PKT_RX_VLAN_STRIPPED. + */ +#define PKT_RX_VLAN_PKT (1ULL << 0) + +#define PKT_RX_RSS_HASH (1ULL << 1) +/**< RX packet with RSS hash result. */ +#define PKT_RX_FDIR (1ULL << 2) +/**< RX packet with FDIR match indicate. */ + +/** + * Deprecated. + * Checking this flag alone is deprecated: check the 2 bits of + * PKT_RX_L4_CKSUM_MASK. + * This flag was set when the L4 checksum of a packet was detected as + * wrong by the hardware. + */ +#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) + +/** + * Deprecated. + * Checking this flag alone is deprecated: check the 2 bits of + * PKT_RX_IP_CKSUM_MASK. + * This flag was set when the IP checksum of a packet was detected as + * wrong by the hardware. + */ +#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) + +#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) +/**< External IP header checksum error. */ + +/** + * A vlan has been stripped by the hardware and its tci is saved in + * mbuf->vlan_tci. This can only happen if vlan stripping is enabled + * in the RX configuration of the PMD. + */ +#define PKT_RX_VLAN_STRIPPED (1ULL << 6) + +/** + * Mask of bits used to determine the status of RX IP checksum. + * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum + * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong + * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid + * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet + * data, but the integrity of the IP header is verified. + */ +#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7)) + +#define PKT_RX_IP_CKSUM_UNKNOWN 0 +#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) +#define PKT_RX_IP_CKSUM_GOOD (1ULL << 7) +#define PKT_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7)) + +/** + * Mask of bits used to determine the status of RX L4 checksum. + * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum + * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong + * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid + * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet + * data, but the integrity of the L4 data is verified. + */ +#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8)) + +#define PKT_RX_L4_CKSUM_UNKNOWN 0 +#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) +#define PKT_RX_L4_CKSUM_GOOD (1ULL << 8) +#define PKT_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8)) + +#define PKT_RX_IEEE1588_PTP (1ULL << 9) +/**< RX IEEE1588 L2 Ethernet PT Packet. */ +#define PKT_RX_IEEE1588_TMST (1ULL << 10) +/**< RX IEEE1588 L2/L4 timestamped packet.*/ +#define PKT_RX_FDIR_ID (1ULL << 13) +/**< FD id reported if FDIR match. */ +#define PKT_RX_FDIR_FLX (1ULL << 14) +/**< Flexible bytes reported if FDIR match. */ + +/** + * The 2 vlans have been stripped by the hardware and their tci are + * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer). + * This can only happen if vlan stripping is enabled in the RX + * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED + * must also be set. + */ +#define PKT_RX_QINQ_STRIPPED (1ULL << 15) + +/** + * Deprecated. + * RX packet with double VLAN stripped. + * This flag is replaced by PKT_RX_QINQ_STRIPPED. + */ +#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED + +/** + * When packets are coalesced by a hardware or virtual driver, this flag + * can be set in the RX mbuf, meaning that the m->tso_segsz field is + * valid and is set to the segment size of original packets. + */ +#define PKT_RX_LRO (1ULL << 16) + +/** + * Indicate that the timestamp field in the mbuf is valid. + */ +#define PKT_RX_TIMESTAMP (1ULL << 17) + +/* add new RX flags here */ + +/* add new TX flags here */ + +/** + * Offload the MACsec. This flag must be set by the application to enable + * this offload feature for a packet to be transmitted. + */ +#define PKT_TX_MACSEC (1ULL << 44) + +/** + * Bits 45:48 used for the tunnel type. + * When doing Tx offload like TSO or checksum, the HW needs to configure the + * tunnel type into the HW descriptors. + */ +#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45) +#define PKT_TX_TUNNEL_GRE (0x2ULL << 45) +#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45) +#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45) +/**< TX packet with MPLS-in-UDP RFC 7510 header. */ +#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45) +/* add new TX TUNNEL type here */ +#define PKT_TX_TUNNEL_MASK (0xFULL << 45) + +/** + * Second VLAN insertion (QinQ) flag. + */ +#define PKT_TX_QINQ_PKT (1ULL << 49) +/**< TX packet with double VLAN inserted. */ + +/** + * TCP segmentation offload. To enable this offload feature for a + * packet to be transmitted on hardware supporting TSO: + * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies + * PKT_TX_TCP_CKSUM) + * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 + * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum + * to 0 in the packet + * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz + * - calculate the pseudo header checksum without taking ip_len in account, + * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and + * rte_ipv6_phdr_cksum() that can be used as helpers. + */ +#define PKT_TX_TCP_SEG (1ULL << 50) + +#define PKT_TX_IEEE1588_TMST (1ULL << 51) +/**< TX IEEE1588 packet to timestamp. */ + +/** + * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved, + * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware + * L4 checksum offload, the user needs to: + * - fill l2_len and l3_len in mbuf + * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM + * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 + * - calculate the pseudo header checksum and set it in the L4 header (only + * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum(). + * For SCTP, set the crc field to 0. + */ +#define PKT_TX_L4_NO_CKSUM (0ULL << 52) +/**< Disable L4 cksum of TX pkt. */ +#define PKT_TX_TCP_CKSUM (1ULL << 52) +/**< TCP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_SCTP_CKSUM (2ULL << 52) +/**< SCTP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_UDP_CKSUM (3ULL << 52) +/**< UDP cksum of TX pkt. computed by NIC. */ +#define PKT_TX_L4_MASK (3ULL << 52) +/**< Mask for L4 cksum offload request. */ + +/** + * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should + * also be set by the application, although a PMD will only check + * PKT_TX_IP_CKSUM. + * - set the IP checksum field in the packet to 0 + * - fill the mbuf offload information: l2_len, l3_len + */ +#define PKT_TX_IP_CKSUM (1ULL << 54) + +/** + * Packet is IPv4. This flag must be set when using any offload feature + * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4 + * packet. If the packet is a tunneled packet, this flag is related to + * the inner headers. + */ +#define PKT_TX_IPV4 (1ULL << 55) + +/** + * Packet is IPv6. This flag must be set when using an offload feature + * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6 + * packet. If the packet is a tunneled packet, this flag is related to + * the inner headers. + */ +#define PKT_TX_IPV6 (1ULL << 56) + +#define PKT_TX_VLAN_PKT (1ULL << 57) +/**< TX packet is a 802.1q VLAN packet. */ + +/** + * Offload the IP checksum of an external header in the hardware. The + * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh + * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the + * packet must be set to 0. + * - set the outer IP checksum field in the packet to 0 + * - fill the mbuf offload information: outer_l2_len, outer_l3_len + */ +#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58) + +/** + * Packet outer header is IPv4. This flag must be set when using any + * outer offload feature (L3 or L4 checksum) to tell the NIC that the + * outer header of the tunneled packet is an IPv4 packet. + */ +#define PKT_TX_OUTER_IPV4 (1ULL << 59) + +/** + * Packet outer header is IPv6. This flag must be set when using any + * outer offload feature (L4 checksum) to tell the NIC that the outer + * header of the tunneled packet is an IPv6 packet. + */ +#define PKT_TX_OUTER_IPV6 (1ULL << 60) + +/** + * Bitmask of all supported packet Tx offload features flags, + * which can be set for packet. + */ +#define PKT_TX_OFFLOAD_MASK ( \ + PKT_TX_IP_CKSUM | \ + PKT_TX_L4_MASK | \ + PKT_TX_OUTER_IP_CKSUM | \ + PKT_TX_TCP_SEG | \ + PKT_TX_IEEE1588_TMST | \ + PKT_TX_QINQ_PKT | \ + PKT_TX_VLAN_PKT | \ + PKT_TX_TUNNEL_MASK | \ + PKT_TX_MACSEC) + +#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ + +#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */ + +/* Use final bit of flags to indicate a control mbuf */ +#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */ + +/** Alignment constraint of mbuf private area. */ +#define RTE_MBUF_PRIV_ALIGN 8 + +/** + * Get the name of a RX offload flag + * + * @param mask + * The mask describing the flag. + * @return + * The name of this flag, or NULL if it's not a valid RX flag. + */ +const char *rte_get_rx_ol_flag_name(uint64_t mask); + +/** + * Dump the list of RX offload flags in a buffer + * + * @param mask + * The mask describing the RX flags. + * @param buf + * The output buffer. + * @param buflen + * The length of the buffer. + * @return + * 0 on success, (-1) on error. + */ +int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); + +/** + * Get the name of a TX offload flag + * + * @param mask + * The mask describing the flag. Usually only one bit must be set. + * Several bits can be given if they belong to the same mask. + * Ex: PKT_TX_L4_MASK. + * @return + * The name of this flag, or NULL if it's not a valid TX flag. + */ +const char *rte_get_tx_ol_flag_name(uint64_t mask); + +/** + * Dump the list of TX offload flags in a buffer + * + * @param mask + * The mask describing the TX flags. + * @param buf + * The output buffer. + * @param buflen + * The length of the buffer. + * @return + * 0 on success, (-1) on error. + */ +int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); + +/** + * Some NICs need at least 2KB buffer to RX standard Ethernet frame without + * splitting it into multiple segments. + * So, for mbufs that planned to be involved into RX/TX, the recommended + * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM. + */ +#define RTE_MBUF_DEFAULT_DATAROOM 2048 +#define RTE_MBUF_DEFAULT_BUF_SIZE \ + (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM) + +/* define a set of marker types that can be used to refer to set points in the + * mbuf. + */ +__extension__ +typedef void *MARKER[0]; /**< generic marker for a point in a structure */ +__extension__ +typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */ +__extension__ +typedef uint64_t MARKER64[0]; +/**< marker that allows us to overwrite 8 bytes with a single assignment */ + +typedef struct { + volatile int16_t cnt; /**< An internal counter value. */ +} rte_atomic16_t; + +/** + * The generic rte_mbuf, containing a packet mbuf. + */ +struct rte_mbuf { + MARKER cacheline0; + + void *buf_addr; /**< Virtual address of segment buffer. */ + /** + * Physical address of segment buffer. + * Force alignment to 8-bytes, so as to ensure we have the exact + * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes + * working on vector drivers easier. + */ + phys_addr_t buf_physaddr __rte_aligned(sizeof(phys_addr_t)); + + /* next 8 bytes are initialised on RX descriptor rearm */ + MARKER64 rearm_data; + uint16_t data_off; + + /** + * Reference counter. Its size should at least equal to the size + * of port field (16 bits), to support zero-copy broadcast. + * It should only be accessed using the following functions: + * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and + * rte_mbuf_refcnt_set(). The functionality of these functions (atomic, + * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC + * config option. + */ + RTE_STD_C11 + union { + rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */ + uint16_t refcnt; + /**< Non-atomically accessed refcnt */ + }; + uint16_t nb_segs; /**< Number of segments. */ + + /** Input port (16 bits to support more than 256 virtual ports). */ + uint16_t port; + + uint64_t ol_flags; /**< Offload features. */ + + /* remaining bytes are set on RX when pulling packet from descriptor */ + MARKER rx_descriptor_fields1; + + /* + * The packet type, which is the combination of outer/inner L2, L3, L4 + * and tunnel types. The packet_type is about data really present in the + * mbuf. Example: if vlan stripping is enabled, a received vlan packet + * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the + * vlan is stripped from the data. + */ + RTE_STD_C11 + union { + uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */ + struct { + uint32_t l2_type:4; /**< (Outer) L2 type. */ + uint32_t l3_type:4; /**< (Outer) L3 type. */ + uint32_t l4_type:4; /**< (Outer) L4 type. */ + uint32_t tun_type:4; /**< Tunnel type. */ + uint32_t inner_l2_type:4; /**< Inner L2 type. */ + uint32_t inner_l3_type:4; /**< Inner L3 type. */ + uint32_t inner_l4_type:4; /**< Inner L4 type. */ + }; + }; + + uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ + uint16_t data_len; /**< Amount of data in segment buffer. */ + /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */ + uint16_t vlan_tci; + + union { + uint32_t rss; /**< RSS hash result if RSS enabled */ + struct { + RTE_STD_C11 + union { + struct { + uint16_t hash; + uint16_t id; + }; + uint32_t lo; + /**< Second 4 flexible bytes */ + }; + uint32_t hi; + /**< First 4 flexible bytes or FD ID, dependent on + * PKT_RX_FDIR_* flag in ol_flags. + */ + } fdir; /**< Filter identifier if FDIR enabled */ + struct { + uint32_t lo; + uint32_t hi; + } sched; /**< Hierarchical scheduler */ + uint32_t usr; + /**< User defined tags. See rte_distributor_process() */ + } hash; /**< hash information */ + + /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */ + uint16_t vlan_tci_outer; + + uint16_t buf_len; /**< Length of segment buffer. */ + + /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference + * are not normalized but are always the same for a given port. + */ + uint64_t timestamp; + + /* second cache line - fields only used in slow path or on TX */ + MARKER cacheline1 __rte_cache_min_aligned; + + RTE_STD_C11 + union { + void *userdata; /**< Can be used for external metadata */ + uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */ + }; + + struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */ + struct rte_mbuf *next; /**< Next segment of scattered packet. */ + + /* fields to support TX offloads */ + RTE_STD_C11 + union { + uint64_t tx_offload; /**< combined for easy fetch */ + __extension__ + struct { + uint64_t l2_len:7; + /**< L2 (MAC) Header Length for non-tunneling pkt. + * Outer_L4_len + ... + Inner_L2_len for tunneling pkt. + */ + uint64_t l3_len:9; /**< L3 (IP) Header Length. */ + uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */ + uint64_t tso_segsz:16; /**< TCP TSO segment size */ + + /* fields for TX offloading of tunnels */ + uint64_t outer_l3_len:9; + /**< Outer L3 (IP) Hdr Length. */ + uint64_t outer_l2_len:7; + /**< Outer L2 (MAC) Hdr Length. */ + + /* uint64_t unused:8; */ + }; + }; + + /** Size of the application private data. In case of an indirect + * mbuf, it stores the direct mbuf private data size. + */ + uint16_t priv_size; + + /** Timesync flags for use with IEEE1588. */ + uint16_t timesync; + + /** Sequence number. See also rte_reorder_insert(). */ + uint32_t seqn; + +} __rte_cache_aligned; + + +/** + * Returns TRUE if given mbuf is indirect, or FALSE otherwise. + */ +#define RTE_MBUF_INDIRECT(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF) + +/** + * Returns TRUE if given mbuf is direct, or FALSE otherwise. + */ +#define RTE_MBUF_DIRECT(mb) (!RTE_MBUF_INDIRECT(mb)) + +/** + * Private data in case of pktmbuf pool. + * + * A structure that contains some pktmbuf_pool-specific data that are + * appended after the mempool structure (in private data). + */ +struct rte_pktmbuf_pool_private { + uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */ + uint16_t mbuf_priv_size; /**< Size of private area in each mbuf. */ +}; + +/** + * A macro that points to an offset into the data in the mbuf. + * + * The returned pointer is cast to type t. Before using this + * function, the user must ensure that the first segment is large + * enough to accommodate its data. + * + * @param m + * The packet mbuf. + * @param o + * The offset into the mbuf data. + * @param t + * The type to cast the result into. + */ +#define rte_pktmbuf_mtod_offset(m, t, o) \ + ((t)((char *)(m)->buf_addr + (m)->data_off + (o))) + +/** + * A macro that points to the start of the data in the mbuf. + * + * The returned pointer is cast to type t. Before using this + * function, the user must ensure that the first segment is large + * enough to accommodate its data. + * + * @param m + * The packet mbuf. + * @param t + * The type to cast the result into. + */ +#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0) + +#ifdef __cplusplus +} +#endif + +#endif /* _MBUF_H_ */ diff --git a/test/bpf/t1.c b/test/bpf/t1.c new file mode 100644 index 0000000000..60f9434abc --- /dev/null +++ b/test/bpf/t1.c @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 Intel Corporation + */ + +/* + * eBPF program sample. + * Accepts pointer to first segment packet data as an input parameter. + * analog of tcpdump -s 1 -d 'dst 1.2.3.4 && udp && dst port 5000' + * (000) ldh [12] + * (001) jeq #0x800 jt 2 jf 12 + * (002) ld [30] + * (003) jeq #0x1020304 jt 4 jf 12 + * (004) ldb [23] + * (005) jeq #0x11 jt 6 jf 12 + * (006) ldh [20] + * (007) jset #0x1fff jt 12 jf 8 + * (008) ldxb 4*([14]&0xf) + * (009) ldh [x + 16] + * (010) jeq #0x1388 jt 11 jf 12 + * (011) ret #1 + * (012) ret #0 + * + * To compile: + * clang -O2 -target bpf -c t1.c + */ + +#include +#include +#include +#include + +uint64_t +entry(void *pkt) +{ + struct ether_header *ether_header = (void *)pkt; + + if (ether_header->ether_type != __builtin_bswap16(0x0800)) + return 0; + + struct iphdr *iphdr = (void *)(ether_header + 1); + if (iphdr->protocol != 17 || (iphdr->frag_off & 0x1ffff) != 0 || + iphdr->daddr != __builtin_bswap32(0x1020304)) + return 0; + + int hlen = iphdr->ihl * 4; + struct udphdr *udphdr = (void *)iphdr + hlen; + + if (udphdr->dest != __builtin_bswap16(5000)) + return 0; + + return 1; +} diff --git a/test/bpf/t2.c b/test/bpf/t2.c new file mode 100644 index 0000000000..69d7a4fe15 --- /dev/null +++ b/test/bpf/t2.c @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 Intel Corporation + */ + +/* + * eBPF program sample. + * Accepts pointer to struct rte_mbuf as an input parameter. + * cleanup mbuf's vlan_tci and all related RX flags + * (PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED). + * Doesn't touch contents of packet data. + * To compile: + * clang -O2 -I${RTE_SDK}/${RTE_TARGET}/include \ + * -target bpf -Wno-int-to-void-pointer-cast -c t2.c + */ + +#include +#include +#include +#include "mbuf.h" + +uint64_t +entry(void *pkt) +{ + struct rte_mbuf *mb; + + mb = pkt; + mb->vlan_tci = 0; + mb->ol_flags &= ~(PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED); + + return 1; +} diff --git a/test/bpf/t3.c b/test/bpf/t3.c new file mode 100644 index 0000000000..531b9cb8c4 --- /dev/null +++ b/test/bpf/t3.c @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 Intel Corporation + */ + +/* + * eBPF program sample. + * Accepts pointer to struct rte_mbuf as an input parameter. + * Dump the mbuf into stdout if it is an ARP packet (aka tcpdump 'arp'). + * To compile: + * clang -O2 -I${RTE_SDK}/${RTE_TARGET}/include \ + * -target bpf -Wno-int-to-void-pointer-cast -c t3.c + */ + +#include +#include +#include +#include +#include +#include "mbuf.h" + +extern void rte_pktmbuf_dump(FILE *, const struct rte_mbuf *, unsigned int); + +uint64_t +entry(const void *pkt) +{ + const struct rte_mbuf *mb; + const struct ether_header *eth; + + mb = pkt; + eth = rte_pktmbuf_mtod(mb, const struct ether_header *); + + if (eth->ether_type == __builtin_bswap16(ETHERTYPE_ARP)) + rte_pktmbuf_dump(stdout, mb, 64); + + return 1; +} -- 2.20.1