From a85786dc816f5c8a9d9e49ac1ce7efd6b94335f3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 9 Feb 2015 09:13:58 +0800 Subject: [PATCH] virtio: fix states handling during initialization Change order of initialization to match Linux kernel. Don't blow away control queue by doing reset when stopped. Calling dev_stop then dev_start would not work. Dev_stop was calling virtio reset and that would clear all queues and clear all feature negotiation. Resolved by only doing reset on device removal. Signed-off-by: Stephen Hemminger Signed-off-by: Changchun Ouyang Acked-by: Huawei Xie --- lib/librte_pmd_virtio/virtio_ethdev.c | 53 ++++++++++++++++----------- lib/librte_pmd_virtio/virtio_pci.c | 10 +---- lib/librte_pmd_virtio/virtio_pci.h | 3 +- 3 files changed, 35 insertions(+), 31 deletions(-) diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c b/lib/librte_pmd_virtio/virtio_ethdev.c index d5951db1d9..0f1592a007 100644 --- a/lib/librte_pmd_virtio/virtio_ethdev.c +++ b/lib/librte_pmd_virtio/virtio_ethdev.c @@ -398,9 +398,15 @@ virtio_dev_cq_queue_setup(struct rte_eth_dev *dev, uint16_t vtpci_queue_idx, static void virtio_dev_close(struct rte_eth_dev *dev) { + struct virtio_hw *hw = dev->data->dev_private; + PMD_INIT_LOG(DEBUG, "virtio_dev_close"); - virtio_dev_stop(dev); + /* reset the NIC */ + vtpci_irq_config(hw, VIRTIO_MSI_NO_VECTOR); + vtpci_reset(hw); + hw->started = 0; + virtio_dev_free_mbufs(dev); } static void @@ -986,6 +992,9 @@ eth_virtio_dev_init(__rte_unused struct eth_driver *eth_drv, /* Setup interrupt callback */ rte_intr_callback_register(&pci_dev->intr_handle, virtio_interrupt_handler, eth_dev); + + virtio_dev_cq_start(eth_dev); + return 0; } @@ -1040,7 +1049,6 @@ virtio_dev_configure(struct rte_eth_dev *dev) { const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode; struct virtio_hw *hw = dev->data->dev_private; - int ret; PMD_INIT_LOG(DEBUG, "configure"); @@ -1051,11 +1059,12 @@ virtio_dev_configure(struct rte_eth_dev *dev) hw->vlan_strip = rxmode->hw_vlan_strip; - ret = vtpci_irq_config(hw, 0); - if (ret != 0) + if (vtpci_irq_config(hw, 0) == VIRTIO_MSI_NO_VECTOR) { PMD_DRV_LOG(ERR, "failed to set config vector"); + return -EBUSY; + } - return ret; + return 0; } @@ -1065,17 +1074,6 @@ virtio_dev_start(struct rte_eth_dev *dev) uint16_t nb_queues, i; struct virtio_hw *hw = dev->data->dev_private; - /* Tell the host we've noticed this device. */ - vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_ACK); - - /* Tell the host we've known how to drive the device. */ - vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_DRIVER); - - virtio_dev_cq_start(dev); - - /* Do final configuration before rx/tx engine starts */ - virtio_dev_rxtx_start(dev); - /* check if lsc interrupt feature is enabled */ if (dev->data->dev_conf.intr_conf.lsc) { if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) { @@ -1092,8 +1090,16 @@ virtio_dev_start(struct rte_eth_dev *dev) /* Initialize Link state */ virtio_dev_link_update(dev, 0); + /* On restart after stop do not touch queues */ + if (hw->started) + return 0; + + /* Do final configuration before rx/tx engine starts */ + virtio_dev_rxtx_start(dev); vtpci_reinit_complete(hw); + hw->started = 1; + /*Notify the backend *Otherwise the tap backend might already stop its queue due to fullness. *vhost backend will have no chance to be waked up @@ -1164,17 +1170,20 @@ static void virtio_dev_free_mbufs(struct rte_eth_dev *dev) } /* - * Stop device: disable rx and tx functions to allow for reconfiguring. + * Stop device: disable interrupt and mark link down */ static void virtio_dev_stop(struct rte_eth_dev *dev) { - struct virtio_hw *hw = dev->data->dev_private; + struct rte_eth_link link; - /* reset the NIC */ - vtpci_irq_config(hw, 0); - vtpci_reset(hw); - virtio_dev_free_mbufs(dev); + PMD_INIT_LOG(DEBUG, "stop"); + + if (dev->data->dev_conf.intr_conf.lsc) + rte_intr_disable(&dev->pci_dev->intr_handle); + + memset(&link, 0, sizeof(link)); + virtio_dev_atomic_write_link_status(dev, &link); } static int diff --git a/lib/librte_pmd_virtio/virtio_pci.c b/lib/librte_pmd_virtio/virtio_pci.c index fac87a767e..2245becad9 100644 --- a/lib/librte_pmd_virtio/virtio_pci.c +++ b/lib/librte_pmd_virtio/virtio_pci.c @@ -139,15 +139,9 @@ vtpci_isr(struct virtio_hw *hw) /* Enable one vector (0) for Link State Intrerrupt */ -int +uint16_t vtpci_irq_config(struct virtio_hw *hw, uint16_t vec) { VIRTIO_WRITE_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR, vec); - vec = VIRTIO_READ_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR); - if (vec == VIRTIO_MSI_NO_VECTOR) { - PMD_DRV_LOG(ERR, "failed to set config vector"); - return -EBUSY; - } - - return 0; + return VIRTIO_READ_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR); } diff --git a/lib/librte_pmd_virtio/virtio_pci.h b/lib/librte_pmd_virtio/virtio_pci.h index 98758e8668..64d9c34642 100644 --- a/lib/librte_pmd_virtio/virtio_pci.h +++ b/lib/librte_pmd_virtio/virtio_pci.h @@ -170,6 +170,7 @@ struct virtio_hw { uint16_t vtnet_hdr_size; uint8_t vlan_strip; uint8_t use_msix; + uint8_t started; uint8_t mac_addr[ETHER_ADDR_LEN]; }; @@ -264,6 +265,6 @@ void vtpci_read_dev_config(struct virtio_hw *, uint64_t, void *, int); uint8_t vtpci_isr(struct virtio_hw *); -int vtpci_irq_config(struct virtio_hw *, uint16_t); +uint16_t vtpci_irq_config(struct virtio_hw *, uint16_t); #endif /* _VIRTIO_PCI_H_ */ -- 2.20.1