From d55f3d9c1a463098142c89e4dcf4d2291833b1c0 Mon Sep 17 00:00:00 2001 From: Huisong Li Date: Mon, 2 Nov 2020 22:38:16 +0800 Subject: [PATCH] net/hns3: fix configurations of port-level scheduling rate Scheduling rate of port-level in hns3 PF driver configured to hardware is obtained from firmware, which determines the bandwidth capability of the port. The rate in firmware is generally configured with the maximum value for network engine supporting multiple rates, such as 10G and 25G. It may cause the following issues: 1) When a 10G optical module is used on the network engine, scheduling rate of this port will also be configured to hardware with 25G. However, the MAC rate of this port is 10G. In this case, it is unreasonable that the port scheduling rate is different from the MAC rate. 2) If default speed in firmware is not the maximum value, the 25G port may not reach the capability of the port. Therefore, we fix configurations of port-level scheduling rate according to updating of MAC link speed. Fixes: 59fad0f32135 ("net/hns3: support link update operation") Cc: stable@dpdk.org Signed-off-by: Huisong Li Signed-off-by: Lijun Ou --- drivers/net/hns3/hns3_dcb.c | 2 +- drivers/net/hns3/hns3_dcb.h | 1 + drivers/net/hns3/hns3_ethdev.c | 8 ++++++++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/hns3/hns3_dcb.c b/drivers/net/hns3/hns3_dcb.c index 27ae01423b..ae8d8268d2 100644 --- a/drivers/net/hns3/hns3_dcb.c +++ b/drivers/net/hns3/hns3_dcb.c @@ -336,7 +336,7 @@ hns3_dcb_get_shapping_para(uint8_t ir_b, uint8_t ir_u, uint8_t ir_s, return shapping_para; } -static int +int hns3_dcb_port_shaper_cfg(struct hns3_hw *hw) { struct hns3_port_shapping_cmd *shap_cfg_cmd; diff --git a/drivers/net/hns3/hns3_dcb.h b/drivers/net/hns3/hns3_dcb.h index 39ff332675..7ab90933f3 100644 --- a/drivers/net/hns3/hns3_dcb.h +++ b/drivers/net/hns3/hns3_dcb.h @@ -204,5 +204,6 @@ int hns3_queue_to_tc_mapping(struct hns3_hw *hw, uint16_t nb_rx_q, uint16_t nb_tx_q); int hns3_dcb_cfg_update(struct hns3_adapter *hns); +int hns3_dcb_port_shaper_cfg(struct hns3_hw *hw); #endif /* _HNS3_DCB_H_ */ diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c index 6b4be769bf..1e382f12a5 100644 --- a/drivers/net/hns3/hns3_ethdev.c +++ b/drivers/net/hns3/hns3_ethdev.c @@ -4332,6 +4332,7 @@ static int hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t speed, uint8_t duplex) { struct hns3_mac *mac = &hw->mac; + uint32_t cur_speed = mac->link_speed; int ret; duplex = hns3_check_speed_dup(duplex, speed); @@ -4343,6 +4344,13 @@ hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t speed, uint8_t duplex) return ret; mac->link_speed = speed; + ret = hns3_dcb_port_shaper_cfg(hw); + if (ret) { + hns3_err(hw, "failed to configure port shaper, ret = %d.", ret); + mac->link_speed = cur_speed; + return ret; + } + mac->link_duplex = duplex; return 0; -- 2.20.1