From db33e69c2ab961984cefa355cebaee2ba7cb2a85 Mon Sep 17 00:00:00 2001 From: Wenzhuo Lu Date: Wed, 23 Nov 2016 12:22:54 -0500 Subject: [PATCH] net/e1000/base: add workaround for ULP entry flow For I217 revision 6, when entering Ultra Low Power (ULP) we need to enable Low Power Link Up (LPLU) and disable Gig speed to make it work. Signed-off-by: Wenzhuo Lu --- drivers/net/e1000/base/e1000_ich8lan.c | 30 ++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c index 0ac982c957..0837a40c06 100644 --- a/drivers/net/e1000/base/e1000_ich8lan.c +++ b/drivers/net/e1000/base/e1000_ich8lan.c @@ -1068,6 +1068,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) u32 mac_reg; s32 ret_val = E1000_SUCCESS; u16 phy_reg; + u16 oem_reg = 0; if ((hw->mac.type < e1000_pch_lpt) || (hw->device_id == E1000_DEV_ID_PCH_LPT_I217_LM) || @@ -1128,6 +1129,25 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg); + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable + * LPLU and disable Gig speed when entering ULP + */ + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) { + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS, + &oem_reg); + if (ret_val) + goto release; + + phy_reg = oem_reg; + phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS; + + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + phy_reg); + + if (ret_val) + goto release; + } + skip_smbus: if (!to_sx) { /* Change the 'Link Status Change' interrupt to trigger @@ -1184,6 +1204,14 @@ skip_smbus: E1000_WRITE_REG(hw, E1000_TCTL, mac_reg); } + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) && + to_sx && (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) { + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + oem_reg); + if (ret_val) + goto release; + } + release: hw->phy.ops.release(hw); out: @@ -1401,6 +1429,8 @@ out: } #endif /* ULP_SUPPORT */ + + /** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure -- 2.20.1