From edc6391e45d350b1341038a55a55e13bad926317 Mon Sep 17 00:00:00 2001 From: Matan Azrad Date: Mon, 29 Jun 2020 14:01:56 +0000 Subject: [PATCH] vdpa/mlx5: control completion queue event mode The CQ polling is necessary in order to manage guest notifications when the guest doesn't work with poll mode (callfd != -1). The CQ polling scheduling method can affect the host CPU utilization and the traffic bandwidth. Define 3 modes to control the CQ polling scheduling: 1. A timer thread which automatically adjusts its delays to the coming traffic rate. 2. A timer thread with fixed delay time. 3. Interrupts: Each CQE burst arms the CQ in order to get an interrupt event in the next traffic burst. When traffic becomes off, mode 3 is taken automatically. The interrupt management takes a lot of CPU cycles but forward traffic event to the guest very fast. Timer thread save the interrupt overhead but may add delay for the guest notification. Add device arguments to control on the mode. Signed-off-by: Matan Azrad Reviewed-by: Maxime Coquelin --- doc/guides/vdpadevs/mlx5.rst | 32 +++++++++++++ drivers/vdpa/mlx5/mlx5_vdpa.c | 57 +++++++++++++++++++++++ drivers/vdpa/mlx5/mlx5_vdpa.h | 12 +++++ drivers/vdpa/mlx5/mlx5_vdpa_event.c | 71 +++++++++++++++++++++-------- 4 files changed, 153 insertions(+), 19 deletions(-) diff --git a/doc/guides/vdpadevs/mlx5.rst b/doc/guides/vdpadevs/mlx5.rst index dd377afda5..9813a87448 100644 --- a/doc/guides/vdpadevs/mlx5.rst +++ b/doc/guides/vdpadevs/mlx5.rst @@ -106,8 +106,40 @@ Run-time configuration - **ethtool** operations on related kernel interfaces also affect the PMD. +Driver options +^^^^^^^^^^^^^^ + - ``class`` parameter [string] Select the class of the driver that should probe the device. `vdpa` for the mlx5 vDPA driver. +- ``event_mode`` parameter [int] + + - 0, Completion queue scheduling will be managed by a timer thread which + automatically adjusts its delays to the coming traffic rate. + + - 1, Completion queue scheduling will be managed by a timer thread with fixed + delay time. + + - 2, Completion queue scheduling will be managed by interrupts. Each CQ burst + arms the CQ in order to get an interrupt event in the next traffic burst. + + - Default mode is 0. + +- ``event_us`` parameter [int] + + Per mode micro-seconds parameter - relevant only for event mode 0 and 1: + + - 0, A nonzero value to set timer step in micro-seconds. The timer thread + dynamic delay change steps according to this value. Default value is 1us. + + - 1, A nonzero value to set fixed timer delay in micro-seconds. Default value + is 100us. + +- ``no_traffic_time`` parameter [int] + + A nonzero value defines the traffic off time, in seconds, that moves the + driver to no-traffic mode. In this mode the timer events are stopped and + interrupts are configured to the device in order to notify traffic for the + driver. Default value is 2s. diff --git a/drivers/vdpa/mlx5/mlx5_vdpa.c b/drivers/vdpa/mlx5/mlx5_vdpa.c index 47db5fd6f4..7f341938cf 100644 --- a/drivers/vdpa/mlx5/mlx5_vdpa.c +++ b/drivers/vdpa/mlx5/mlx5_vdpa.c @@ -43,6 +43,7 @@ #define MLX5_VDPA_MAX_RETRIES 20 #define MLX5_VDPA_USEC 1000 +#define MLX5_VDPA_DEFAULT_NO_TRAFFIC_TIME_S 2LLU TAILQ_HEAD(mlx5_vdpa_privs, mlx5_vdpa_priv) priv_list = TAILQ_HEAD_INITIALIZER(priv_list); @@ -624,6 +625,61 @@ mlx5_vdpa_roce_disable(struct rte_pci_addr *addr, struct ibv_device **ibv) return -rte_errno; } +static int +mlx5_vdpa_args_check_handler(const char *key, const char *val, void *opaque) +{ + struct mlx5_vdpa_priv *priv = opaque; + unsigned long tmp; + + if (strcmp(key, "class") == 0) + return 0; + errno = 0; + tmp = strtoul(val, NULL, 0); + if (errno) { + DRV_LOG(WARNING, "%s: \"%s\" is an invalid integer.", key, val); + return -errno; + } + if (strcmp(key, "event_mode") == 0) { + if (tmp <= MLX5_VDPA_EVENT_MODE_ONLY_INTERRUPT) + priv->event_mode = (int)tmp; + else + DRV_LOG(WARNING, "Invalid event_mode %s.", val); + } else if (strcmp(key, "event_us") == 0) { + priv->event_us = (uint32_t)tmp; + } else if (strcmp(key, "no_traffic_time") == 0) { + priv->no_traffic_time_s = (uint32_t)tmp; + } else { + DRV_LOG(WARNING, "Invalid key %s.", key); + } + return 0; +} + +static void +mlx5_vdpa_config_get(struct rte_devargs *devargs, struct mlx5_vdpa_priv *priv) +{ + struct rte_kvargs *kvlist; + + priv->event_mode = MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER; + priv->event_us = 0; + priv->no_traffic_time_s = MLX5_VDPA_DEFAULT_NO_TRAFFIC_TIME_S; + if (devargs == NULL) + return; + kvlist = rte_kvargs_parse(devargs->args, NULL); + if (kvlist == NULL) + return; + rte_kvargs_process(kvlist, NULL, mlx5_vdpa_args_check_handler, priv); + rte_kvargs_free(kvlist); + if (!priv->event_us) { + if (priv->event_mode == MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER) + priv->event_us = MLX5_VDPA_DEFAULT_TIMER_STEP_US; + else if (priv->event_mode == MLX5_VDPA_EVENT_MODE_FIXED_TIMER) + priv->event_us = MLX5_VDPA_DEFAULT_TIMER_DELAY_US; + } + DRV_LOG(DEBUG, "event mode is %d.", priv->event_mode); + DRV_LOG(DEBUG, "event_us is %u us.", priv->event_us); + DRV_LOG(DEBUG, "no traffic time is %u s.", priv->no_traffic_time_s); +} + /** * DPDK callback to register a PCI device. * @@ -713,6 +769,7 @@ mlx5_vdpa_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, rte_errno = rte_errno ? rte_errno : EINVAL; goto error; } + mlx5_vdpa_config_get(pci_dev->device.devargs, priv); SLIST_INIT(&priv->mr_list); pthread_mutex_lock(&priv_list_lock); TAILQ_INSERT_TAIL(&priv_list, priv, next); diff --git a/drivers/vdpa/mlx5/mlx5_vdpa.h b/drivers/vdpa/mlx5/mlx5_vdpa.h index 685bb42f43..abf7d1b2b7 100644 --- a/drivers/vdpa/mlx5/mlx5_vdpa.h +++ b/drivers/vdpa/mlx5/mlx5_vdpa.h @@ -36,6 +36,9 @@ #define VIRTIO_F_RING_PACKED 34 #endif +#define MLX5_VDPA_DEFAULT_TIMER_DELAY_US 100u +#define MLX5_VDPA_DEFAULT_TIMER_STEP_US 1u + struct mlx5_vdpa_cq { uint16_t log_desc_n; uint32_t cq_ci:24; @@ -101,6 +104,12 @@ struct mlx5_vdpa_steer { } rss[7]; }; +enum { + MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER, + MLX5_VDPA_EVENT_MODE_FIXED_TIMER, + MLX5_VDPA_EVENT_MODE_ONLY_INTERRUPT +}; + struct mlx5_vdpa_priv { TAILQ_ENTRY(mlx5_vdpa_priv) next; uint8_t configured; @@ -110,7 +119,10 @@ struct mlx5_vdpa_priv { pthread_mutex_t timer_lock; pthread_cond_t timer_cond; volatile uint8_t timer_on; + int event_mode; + uint32_t event_us; uint32_t timer_delay_us; + uint32_t no_traffic_time_s; struct rte_vdpa_device *vdev; /* vDPA device. */ int vid; /* vhost device id. */ struct ibv_context *ctx; /* Device context. */ diff --git a/drivers/vdpa/mlx5/mlx5_vdpa_event.c b/drivers/vdpa/mlx5/mlx5_vdpa_event.c index 1c9f939cc3..e14b380f19 100644 --- a/drivers/vdpa/mlx5/mlx5_vdpa_event.c +++ b/drivers/vdpa/mlx5/mlx5_vdpa_event.c @@ -20,9 +20,6 @@ #include "mlx5_vdpa.h" -#define MLX5_VDPA_DEFAULT_TIMER_DELAY_US 500u -#define MLX5_VDPA_NO_TRAFFIC_TIME_S 2LLU - void mlx5_vdpa_event_qp_global_release(struct mlx5_vdpa_priv *priv) { @@ -175,7 +172,8 @@ mlx5_vdpa_cq_create(struct mlx5_vdpa_priv *priv, uint16_t log_desc_n, rte_errno = errno; goto error; } - if (callfd != -1) { + if (callfd != -1 && + priv->event_mode != MLX5_VDPA_EVENT_MODE_ONLY_INTERRUPT) { ret = mlx5_glue->devx_subscribe_devx_event_fd(priv->eventc, callfd, cq->cq->obj, 0); @@ -253,21 +251,43 @@ mlx5_vdpa_arm_all_cqs(struct mlx5_vdpa_priv *priv) } } +static void +mlx5_vdpa_timer_sleep(struct mlx5_vdpa_priv *priv, uint32_t max) +{ + if (priv->event_mode == MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER) { + switch (max) { + case 0: + priv->timer_delay_us += priv->event_us; + break; + case 1: + break; + default: + priv->timer_delay_us /= max; + break; + } + } + usleep(priv->timer_delay_us); +} + static void * mlx5_vdpa_poll_handle(void *arg) { struct mlx5_vdpa_priv *priv = arg; int i; struct mlx5_vdpa_cq *cq; - uint32_t total; + uint32_t max; uint64_t current_tic; pthread_mutex_lock(&priv->timer_lock); while (!priv->timer_on) pthread_cond_wait(&priv->timer_cond, &priv->timer_lock); pthread_mutex_unlock(&priv->timer_lock); + priv->timer_delay_us = priv->event_mode == + MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER ? + MLX5_VDPA_DEFAULT_TIMER_DELAY_US : + priv->event_us; while (1) { - total = 0; + max = 0; for (i = 0; i < priv->nr_virtqs; i++) { cq = &priv->virtqs[i].eqp.cq; if (cq->cq && !cq->armed) { @@ -278,15 +298,16 @@ mlx5_vdpa_poll_handle(void *arg) if (cq->callfd != -1) eventfd_write(cq->callfd, (eventfd_t)1); - total += comp; + if (comp > max) + max = comp; } } } current_tic = rte_rdtsc(); - if (!total) { + if (!max) { /* No traffic ? stop timer and load interrupts. */ if (current_tic - priv->last_traffic_tic >= - rte_get_timer_hz() * MLX5_VDPA_NO_TRAFFIC_TIME_S) { + rte_get_timer_hz() * priv->no_traffic_time_s) { DRV_LOG(DEBUG, "Device %s traffic was stopped.", priv->vdev->device->name); mlx5_vdpa_arm_all_cqs(priv); @@ -296,12 +317,16 @@ mlx5_vdpa_poll_handle(void *arg) pthread_cond_wait(&priv->timer_cond, &priv->timer_lock); pthread_mutex_unlock(&priv->timer_lock); + priv->timer_delay_us = priv->event_mode == + MLX5_VDPA_EVENT_MODE_DYNAMIC_TIMER ? + MLX5_VDPA_DEFAULT_TIMER_DELAY_US : + priv->event_us; continue; } } else { priv->last_traffic_tic = current_tic; } - usleep(priv->timer_delay_us); + mlx5_vdpa_timer_sleep(priv, max); } return NULL; } @@ -327,6 +352,13 @@ mlx5_vdpa_interrupt_handler(void *cb_arg) struct mlx5_vdpa_virtq, eqp); mlx5_vdpa_cq_poll(cq); + if (priv->event_mode == MLX5_VDPA_EVENT_MODE_ONLY_INTERRUPT) { + mlx5_vdpa_cq_arm(priv, cq); + /* Notify guest for descs consuming. */ + if (cq->callfd != -1) + eventfd_write(cq->callfd, (eventfd_t)1); + return; + } /* Don't arm again - timer will take control. */ DRV_LOG(DEBUG, "Device %s virtq %d cq %d event was captured." " Timer is %s, cq ci is %u.\n", @@ -356,15 +388,16 @@ mlx5_vdpa_cqe_event_setup(struct mlx5_vdpa_priv *priv) if (!priv->eventc) /* All virtqs are in poll mode. */ return 0; - pthread_mutex_init(&priv->timer_lock, NULL); - pthread_cond_init(&priv->timer_cond, NULL); - priv->timer_on = 0; - priv->timer_delay_us = MLX5_VDPA_DEFAULT_TIMER_DELAY_US; - ret = pthread_create(&priv->timer_tid, NULL, mlx5_vdpa_poll_handle, - (void *)priv); - if (ret) { - DRV_LOG(ERR, "Failed to create timer thread."); - return -1; + if (priv->event_mode != MLX5_VDPA_EVENT_MODE_ONLY_INTERRUPT) { + pthread_mutex_init(&priv->timer_lock, NULL); + pthread_cond_init(&priv->timer_cond, NULL); + priv->timer_on = 0; + ret = pthread_create(&priv->timer_tid, NULL, + mlx5_vdpa_poll_handle, (void *)priv); + if (ret) { + DRV_LOG(ERR, "Failed to create timer thread."); + return -1; + } } flags = fcntl(priv->eventc->fd, F_GETFL); ret = fcntl(priv->eventc->fd, F_SETFL, flags | O_NONBLOCK); -- 2.20.1