From f14c0b4db8dea334e10f279de0a1ab711a5bdaf8 Mon Sep 17 00:00:00 2001 From: Huawei Xie Date: Thu, 9 Oct 2014 02:54:37 +0800 Subject: [PATCH] vhost: remove useless code for Rx/Tx Remove all other codes and only keep virtio_dev_rx, copy_from_mbuf_to_vring, virtio_dev_merge_rx, virtio_dev_merge_tx. Previous vhost merge-able feature introduces another version of tx function, virtio_dev_merge_tx. Actually it is not related to merge-able feature but is the fix for memcpy between mbuf and vring descriptors. This lib will create the tx functions based on virtio_dev_merge_tx. Signed-off-by: Huawei Xie Acked-by: Changchun Ouyang [Thomas: do not remove code used or moved later] --- lib/librte_vhost/vhost_rxtx.c | 3031 +-------------------------------- 1 file changed, 49 insertions(+), 2982 deletions(-) diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c index c23d453551..365d5c0e6f 100644 --- a/lib/librte_vhost/vhost_rxtx.c +++ b/lib/librte_vhost/vhost_rxtx.c @@ -54,817 +54,7 @@ #include "virtio-net.h" #include "vhost-net-cdev.h" -#define MAX_QUEUES 128 - -/* the maximum number of external ports supported */ -#define MAX_SUP_PORTS 1 - -/* - * Calculate the number of buffers needed per port - */ -#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \ - (num_switching_cores*MAX_PKT_BURST) + \ - (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\ - (num_switching_cores*MBUF_CACHE_SIZE)) - -#define MBUF_CACHE_SIZE 128 -#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) - -/* - * No frame data buffer allocated from host are required for zero copy - * implementation, guest will allocate the frame data buffer, and vhost - * directly use it. - */ -#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518 -#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \ - + RTE_PKTMBUF_HEADROOM) -#define MBUF_CACHE_SIZE_ZCP 0 - -/* - * RX and TX Prefetch, Host, and Write-back threshold values should be - * carefully set for optimal performance. Consult the network - * controller's datasheet and supporting DPDK documentation for guidance - * on how these parameters should be set. - */ -#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */ -#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */ -#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */ - -/* - * These default values are optimized for use with the Intel(R) 82599 10 GbE - * Controller and the DPDK ixgbe PMD. Consider using other values for other - * network controllers and/or network drivers. - */ -#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */ -#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */ -#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */ - #define MAX_PKT_BURST 32 /* Max burst size for RX/TX */ -#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */ -#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */ - -#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */ -#define BURST_RX_RETRIES 4 /* Number of retries on RX. */ - -#define JUMBO_FRAME_MAX_SIZE 0x2600 - -/* State of virtio device. */ -#define DEVICE_MAC_LEARNING 0 -#define DEVICE_RX 1 -#define DEVICE_SAFE_REMOVE 2 - -/* Config_core_flag status definitions. */ -#define REQUEST_DEV_REMOVAL 1 -#define ACK_DEV_REMOVAL 0 - -/* Configurable number of RX/TX ring descriptors */ -#define RTE_TEST_RX_DESC_DEFAULT 1024 -#define RTE_TEST_TX_DESC_DEFAULT 512 - -/* - * Need refine these 2 macros for legacy and DPDK based front end: - * Max vring avail descriptor/entries from guest - MAX_PKT_BURST - * And then adjust power 2. - */ -/* - * For legacy front end, 128 descriptors, - * half for virtio header, another half for mbuf. - */ -#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */ -#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */ - -/* Get first 4 bytes in mbuf headroom. */ -#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \ - + sizeof(struct rte_mbuf))) - -/* true if x is a power of 2 */ -#define POWEROF2(x) ((((x)-1) & (x)) == 0) - -#define INVALID_PORT_ID 0xFF - -/* Max number of devices. Limited by vmdq. */ -#define MAX_DEVICES 64 - -/* Size of buffers used for snprintfs. */ -#define MAX_PRINT_BUFF 6072 - -/* Maximum character device basename size. */ -#define MAX_BASENAME_SZ 10 - -/* Maximum long option length for option parsing. */ -#define MAX_LONG_OPT_SZ 64 - -/* Used to compare MAC addresses. */ -#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL - -/* Number of descriptors per cacheline. */ -#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc)) - -/* mask of enabled ports */ -static uint32_t enabled_port_mask = 0; - -/*Number of switching cores enabled*/ -static uint32_t num_switching_cores = 0; - -/* number of devices/queues to support*/ -static uint32_t num_queues = 0; -uint32_t num_devices = 0; - -/* - * Enable zero copy, pkts buffer will directly dma to hw descriptor, - * disabled on default. - */ -static uint32_t zero_copy; - -/* number of descriptors to apply*/ -static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP; -static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP; - -/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */ -#define MAX_RING_DESC 4096 - -struct vpool { - struct rte_mempool *pool; - struct rte_ring *ring; - uint32_t buf_size; -} vpool_array[MAX_QUEUES+MAX_QUEUES]; - -/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */ -typedef enum { - VM2VM_DISABLED = 0, - VM2VM_SOFTWARE = 1, - VM2VM_HARDWARE = 2, - VM2VM_LAST -} vm2vm_type; -static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE; - -/* The type of host physical address translated from guest physical address. */ -typedef enum { - PHYS_ADDR_CONTINUOUS = 0, - PHYS_ADDR_CROSS_SUBREG = 1, - PHYS_ADDR_INVALID = 2, - PHYS_ADDR_LAST -} hpa_type; - -/* Enable stats. */ -static uint32_t enable_stats = 0; -/* Enable retries on RX. */ -static uint32_t enable_retry = 1; -/* Specify timeout (in useconds) between retries on RX. */ -static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US; -/* Specify the number of retries on RX. */ -static uint32_t burst_rx_retry_num = BURST_RX_RETRIES; - -/* Character device basename. Can be set by user. */ -static char dev_basename[MAX_BASENAME_SZ] = "vhost-net"; - -/* Charater device index. Can be set by user. */ -static uint32_t dev_index = 0; - -/* This can be set by the user so it is made available here. */ -extern uint64_t VHOST_FEATURES; - -/* Default configuration for rx and tx thresholds etc. */ -static struct rte_eth_rxconf rx_conf_default = { - .rx_thresh = { - .pthresh = RX_PTHRESH, - .hthresh = RX_HTHRESH, - .wthresh = RX_WTHRESH, - }, - .rx_drop_en = 1, -}; - -/* - * These default values are optimized for use with the Intel(R) 82599 10 GbE - * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other - * network controllers and/or network drivers. - */ -static struct rte_eth_txconf tx_conf_default = { - .tx_thresh = { - .pthresh = TX_PTHRESH, - .hthresh = TX_HTHRESH, - .wthresh = TX_WTHRESH, - }, - .tx_free_thresh = 0, /* Use PMD default values */ - .tx_rs_thresh = 0, /* Use PMD default values */ -}; - -/* empty vmdq configuration structure. Filled in programatically */ -static struct rte_eth_conf vmdq_conf_default = { - .rxmode = { - .mq_mode = ETH_MQ_RX_VMDQ_ONLY, - .split_hdr_size = 0, - .header_split = 0, /**< Header Split disabled */ - .hw_ip_checksum = 0, /**< IP checksum offload disabled */ - .hw_vlan_filter = 0, /**< VLAN filtering disabled */ - /* - * It is necessary for 1G NIC such as I350, - * this fixes bug of ipv4 forwarding in guest can't - * forward pakets from one virtio dev to another virtio dev. - */ - .hw_vlan_strip = 1, /**< VLAN strip enabled. */ - .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ - .hw_strip_crc = 0, /**< CRC stripped by hardware */ - }, - - .txmode = { - .mq_mode = ETH_MQ_TX_NONE, - }, - .rx_adv_conf = { - /* - * should be overridden separately in code with - * appropriate values - */ - .vmdq_rx_conf = { - .nb_queue_pools = ETH_8_POOLS, - .enable_default_pool = 0, - .default_pool = 0, - .nb_pool_maps = 0, - .pool_map = {{0, 0},}, - }, - }, -}; - -static unsigned lcore_ids[RTE_MAX_LCORE]; -static uint8_t ports[RTE_MAX_ETHPORTS]; -static unsigned num_ports = 0; /**< The number of ports specified in command line */ - -static const uint16_t external_pkt_default_vlan_tag = 2000; -const uint16_t vlan_tags[] = { - 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, - 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, - 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023, - 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, - 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039, - 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, - 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055, - 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063, -}; - -/* ethernet addresses of ports */ -static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS]; - -/* heads for the main used and free linked lists for the data path. */ -static struct virtio_net_data_ll *ll_root_used = NULL; -static struct virtio_net_data_ll *ll_root_free = NULL; - -/* Array of data core structures containing information on individual core linked lists. */ -static struct lcore_info lcore_info[RTE_MAX_LCORE]; - -/* Used for queueing bursts of TX packets. */ -struct mbuf_table { - unsigned len; - unsigned txq_id; - struct rte_mbuf *m_table[MAX_PKT_BURST]; -}; - -/* TX queue for each data core. */ -struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE]; - -/* TX queue fori each virtio device for zero copy. */ -struct mbuf_table tx_queue_zcp[MAX_QUEUES]; - -/* Vlan header struct used to insert vlan tags on TX. */ -struct vlan_ethhdr { - unsigned char h_dest[ETH_ALEN]; - unsigned char h_source[ETH_ALEN]; - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; - -/* IPv4 Header */ -struct ipv4_hdr { - uint8_t version_ihl; /**< version and header length */ - uint8_t type_of_service; /**< type of service */ - uint16_t total_length; /**< length of packet */ - uint16_t packet_id; /**< packet ID */ - uint16_t fragment_offset; /**< fragmentation offset */ - uint8_t time_to_live; /**< time to live */ - uint8_t next_proto_id; /**< protocol ID */ - uint16_t hdr_checksum; /**< header checksum */ - uint32_t src_addr; /**< source address */ - uint32_t dst_addr; /**< destination address */ -} __attribute__((__packed__)); - -/* Header lengths. */ -#define VLAN_HLEN 4 -#define VLAN_ETH_HLEN 18 - -/* Per-device statistics struct */ -struct device_statistics { - uint64_t tx_total; - rte_atomic64_t rx_total_atomic; - uint64_t rx_total; - uint64_t tx; - rte_atomic64_t rx_atomic; - uint64_t rx; -} __rte_cache_aligned; -struct device_statistics dev_statistics[MAX_DEVICES]; - -/* - * Builds up the correct configuration for VMDQ VLAN pool map - * according to the pool & queue limits. - */ -static inline int -get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices) -{ - struct rte_eth_vmdq_rx_conf conf; - unsigned i; - - memset(&conf, 0, sizeof(conf)); - conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices; - conf.nb_pool_maps = num_devices; - conf.enable_loop_back = - vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back; - - for (i = 0; i < conf.nb_pool_maps; i++) { - conf.pool_map[i].vlan_id = vlan_tags[ i ]; - conf.pool_map[i].pools = (1UL << i); - } - - (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf))); - (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf, - sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf))); - return 0; -} - -/* - * Validate the device number according to the max pool number gotten form - * dev_info. If the device number is invalid, give the error message and - * return -1. Each device must have its own pool. - */ -static inline int -validate_num_devices(uint32_t max_nb_devices) -{ - if (num_devices > max_nb_devices) { - RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n"); - return -1; - } - return 0; -} - -/* - * Initialises a given port using global settings and with the rx buffers - * coming from the mbuf_pool passed as parameter - */ -static inline int -port_init(uint8_t port) -{ - struct rte_eth_dev_info dev_info; - struct rte_eth_conf port_conf; - uint16_t rx_rings, tx_rings; - uint16_t rx_ring_size, tx_ring_size; - int retval; - uint16_t q; - - /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */ - rte_eth_dev_info_get (port, &dev_info); - - /*configure the number of supported virtio devices based on VMDQ limits */ - num_devices = dev_info.max_vmdq_pools; - num_queues = dev_info.max_rx_queues; - - if (zero_copy) { - rx_ring_size = num_rx_descriptor; - tx_ring_size = num_tx_descriptor; - tx_rings = dev_info.max_tx_queues; - } else { - rx_ring_size = RTE_TEST_RX_DESC_DEFAULT; - tx_ring_size = RTE_TEST_TX_DESC_DEFAULT; - tx_rings = (uint16_t)rte_lcore_count(); - } - - retval = validate_num_devices(MAX_DEVICES); - if (retval < 0) - return retval; - - /* Get port configuration. */ - retval = get_eth_conf(&port_conf, num_devices); - if (retval < 0) - return retval; - - if (port >= rte_eth_dev_count()) return -1; - - rx_rings = (uint16_t)num_queues, - /* Configure ethernet device. */ - retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf); - if (retval != 0) - return retval; - - /* Setup the queues. */ - for (q = 0; q < rx_rings; q ++) { - retval = rte_eth_rx_queue_setup(port, q, rx_ring_size, - rte_eth_dev_socket_id(port), &rx_conf_default, - vpool_array[q].pool); - if (retval < 0) - return retval; - } - for (q = 0; q < tx_rings; q ++) { - retval = rte_eth_tx_queue_setup(port, q, tx_ring_size, - rte_eth_dev_socket_id(port), &tx_conf_default); - if (retval < 0) - return retval; - } - - /* Start the device. */ - retval = rte_eth_dev_start(port); - if (retval < 0) { - RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n"); - return retval; - } - - rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]); - RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices); - RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8 - " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", - (unsigned)port, - vmdq_ports_eth_addr[port].addr_bytes[0], - vmdq_ports_eth_addr[port].addr_bytes[1], - vmdq_ports_eth_addr[port].addr_bytes[2], - vmdq_ports_eth_addr[port].addr_bytes[3], - vmdq_ports_eth_addr[port].addr_bytes[4], - vmdq_ports_eth_addr[port].addr_bytes[5]); - - return 0; -} - -/* - * Set character device basename. - */ -static int -us_vhost_parse_basename(const char *q_arg) -{ - /* parse number string */ - - if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ) - return -1; - else - snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg); - - return 0; -} - -/* - * Parse the portmask provided at run time. - */ -static int -parse_portmask(const char *portmask) -{ - char *end = NULL; - unsigned long pm; - - errno = 0; - - /* parse hexadecimal string */ - pm = strtoul(portmask, &end, 16); - if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) - return -1; - - if (pm == 0) - return -1; - - return pm; - -} - -/* - * Parse num options at run time. - */ -static int -parse_num_opt(const char *q_arg, uint32_t max_valid_value) -{ - char *end = NULL; - unsigned long num; - - errno = 0; - - /* parse unsigned int string */ - num = strtoul(q_arg, &end, 10); - if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0)) - return -1; - - if (num > max_valid_value) - return -1; - - return num; - -} - -/* - * Display usage - */ -static void -us_vhost_usage(const char *prgname) -{ - RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n" - " --vm2vm [0|1|2]\n" - " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n" - " --dev-basename --dev-index [0-N]\n" - " --nb-devices ND\n" - " -p PORTMASK: Set mask for ports to be used by application\n" - " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n" - " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n" - " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n" - " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n" - " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n" - " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n" - " --dev-basename: The basename to be used for the character device.\n" - " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n" - " --zero-copy [0|1]: disable(default)/enable rx/tx " - "zero copy\n" - " --rx-desc-num [0-N]: the number of descriptors on rx, " - "used only when zero copy is enabled.\n" - " --tx-desc-num [0-N]: the number of descriptors on tx, " - "used only when zero copy is enabled.\n", - prgname); -} - -/* - * Parse the arguments given in the command line of the application. - */ -static int -us_vhost_parse_args(int argc, char **argv) -{ - int opt, ret; - int option_index; - unsigned i; - const char *prgname = argv[0]; - static struct option long_option[] = { - {"vm2vm", required_argument, NULL, 0}, - {"rx-retry", required_argument, NULL, 0}, - {"rx-retry-delay", required_argument, NULL, 0}, - {"rx-retry-num", required_argument, NULL, 0}, - {"mergeable", required_argument, NULL, 0}, - {"stats", required_argument, NULL, 0}, - {"dev-basename", required_argument, NULL, 0}, - {"dev-index", required_argument, NULL, 0}, - {"zero-copy", required_argument, NULL, 0}, - {"rx-desc-num", required_argument, NULL, 0}, - {"tx-desc-num", required_argument, NULL, 0}, - {NULL, 0, 0, 0}, - }; - - /* Parse command line */ - while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) { - switch (opt) { - /* Portmask */ - case 'p': - enabled_port_mask = parse_portmask(optarg); - if (enabled_port_mask == 0) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n"); - us_vhost_usage(prgname); - return -1; - } - break; - - case 0: - /* Enable/disable vm2vm comms. */ - if (!strncmp(long_option[option_index].name, "vm2vm", - MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, (VM2VM_LAST - 1)); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument for " - "vm2vm [0|1|2]\n"); - us_vhost_usage(prgname); - return -1; - } else { - vm2vm_mode = (vm2vm_type)ret; - } - } - - /* Enable/disable retries on RX. */ - if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, 1); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n"); - us_vhost_usage(prgname); - return -1; - } else { - enable_retry = ret; - } - } - - /* Specify the retries delay time (in useconds) on RX. */ - if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, INT32_MAX); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n"); - us_vhost_usage(prgname); - return -1; - } else { - burst_rx_delay_time = ret; - } - } - - /* Specify the retries number on RX. */ - if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, INT32_MAX); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n"); - us_vhost_usage(prgname); - return -1; - } else { - burst_rx_retry_num = ret; - } - } - - /* Enable/disable RX mergeable buffers. */ - if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, 1); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n"); - us_vhost_usage(prgname); - return -1; - } else { - if (ret) { - vmdq_conf_default.rxmode.jumbo_frame = 1; - vmdq_conf_default.rxmode.max_rx_pkt_len - = JUMBO_FRAME_MAX_SIZE; - VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF); - } - } - } - - /* Enable/disable stats. */ - if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, INT32_MAX); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n"); - us_vhost_usage(prgname); - return -1; - } else { - enable_stats = ret; - } - } - - /* Set character device basename. */ - if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) { - if (us_vhost_parse_basename(optarg) == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ); - us_vhost_usage(prgname); - return -1; - } - } - - /* Set character device index. */ - if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, INT32_MAX); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n"); - us_vhost_usage(prgname); - return -1; - } else - dev_index = ret; - } - - /* Enable/disable rx/tx zero copy. */ - if (!strncmp(long_option[option_index].name, - "zero-copy", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, 1); - if (ret == -1) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument" - " for zero-copy [0|1]\n"); - us_vhost_usage(prgname); - return -1; - } else - zero_copy = ret; - - if (zero_copy) { -#ifdef RTE_MBUF_REFCNT - RTE_LOG(ERR, VHOST_CONFIG, "Before running " - "zero copy vhost APP, please " - "disable RTE_MBUF_REFCNT\n" - "in config file and then rebuild DPDK " - "core lib!\n" - "Otherwise please disable zero copy " - "flag in command line!\n"); - return -1; -#endif - } - } - - /* Specify the descriptor number on RX. */ - if (!strncmp(long_option[option_index].name, - "rx-desc-num", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, MAX_RING_DESC); - if ((ret == -1) || (!POWEROF2(ret))) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument for rx-desc-num[0-N]," - "power of 2 required.\n"); - us_vhost_usage(prgname); - return -1; - } else { - num_rx_descriptor = ret; - } - } - - /* Specify the descriptor number on TX. */ - if (!strncmp(long_option[option_index].name, - "tx-desc-num", MAX_LONG_OPT_SZ)) { - ret = parse_num_opt(optarg, MAX_RING_DESC); - if ((ret == -1) || (!POWEROF2(ret))) { - RTE_LOG(INFO, VHOST_CONFIG, - "Invalid argument for tx-desc-num [0-N]," - "power of 2 required.\n"); - us_vhost_usage(prgname); - return -1; - } else { - num_tx_descriptor = ret; - } - } - - break; - - /* Invalid option - print options. */ - default: - us_vhost_usage(prgname); - return -1; - } - } - - for (i = 0; i < RTE_MAX_ETHPORTS; i++) { - if (enabled_port_mask & (1 << i)) - ports[num_ports++] = (uint8_t)i; - } - - if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) { - RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u," - "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS); - return -1; - } - - if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) { - RTE_LOG(INFO, VHOST_PORT, - "Vhost zero copy doesn't support software vm2vm," - "please specify 'vm2vm 2' to use hardware vm2vm.\n"); - return -1; - } - - if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) { - RTE_LOG(INFO, VHOST_PORT, - "Vhost zero copy doesn't support jumbo frame," - "please specify '--mergeable 0' to disable the " - "mergeable feature.\n"); - return -1; - } - - return 0; -} - -/* - * Update the global var NUM_PORTS and array PORTS according to system ports number - * and return valid ports number - */ -static unsigned check_ports_num(unsigned nb_ports) -{ - unsigned valid_num_ports = num_ports; - unsigned portid; - - if (num_ports > nb_ports) { - RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n", - num_ports, nb_ports); - num_ports = nb_ports; - } - - for (portid = 0; portid < num_ports; portid ++) { - if (ports[portid] >= nb_ports) { - RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n", - ports[portid], (nb_ports - 1)); - ports[portid] = INVALID_PORT_ID; - valid_num_ports--; - } - } - return valid_num_ports; -} - -/* - * Macro to print out packet contents. Wrapped in debug define so that the - * data path is not effected when debug is disabled. - */ -#ifdef DEBUG -#define PRINT_PACKET(device, addr, size, header) do { \ - char *pkt_addr = (char*)(addr); \ - unsigned int index; \ - char packet[MAX_PRINT_BUFF]; \ - \ - if ((header)) \ - snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \ - else \ - snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \ - for (index = 0; index < (size); index++) { \ - snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \ - "%02hhx ", pkt_addr[index]); \ - } \ - snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \ - \ - LOG_DEBUG(VHOST_DATA, "%s", packet); \ -} while(0) -#else -#define PRINT_PACKET(device, addr, size, header) do{} while(0) -#endif /* * Function to convert guest physical addresses to vhost virtual addresses. This @@ -891,41 +81,6 @@ gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa) return vhost_va; } -/* - * Function to convert guest physical addresses to vhost physical addresses. - * This is used to convert virtio buffer addresses. - */ -static inline uint64_t __attribute__((always_inline)) -gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa, - uint32_t buf_len, hpa_type *addr_type) -{ - struct virtio_memory_regions_hpa *region; - uint32_t regionidx; - uint64_t vhost_pa = 0; - - *addr_type = PHYS_ADDR_INVALID; - - for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) { - region = &dev->mem->regions_hpa[regionidx]; - if ((guest_pa >= region->guest_phys_address) && - (guest_pa <= region->guest_phys_address_end)) { - vhost_pa = region->host_phys_addr_offset + guest_pa; - if (likely((guest_pa + buf_len - 1) - <= region->guest_phys_address_end)) - *addr_type = PHYS_ADDR_CONTINUOUS; - else - *addr_type = PHYS_ADDR_CROSS_SUBREG; - break; - } - } - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n", - dev->device_fh, (void *)(uintptr_t)guest_pa, - (void *)(uintptr_t)vhost_pa); - - return vhost_pa; -} - /* * This function adds buffers to the virtio devices RX virtqueue. Buffers can * be received from the physical port or from another virtio device. A packet @@ -1417,458 +572,68 @@ virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts, return count; } -/* - * Compares a packet destination MAC address to a device MAC address. - */ -static inline int __attribute__((always_inline)) -ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb) +/* This function works for TX packets with mergeable feature enabled. */ +static inline void __attribute__((always_inline)) +virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool) { - return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0); -} + struct rte_mbuf *m, *prev; + struct vhost_virtqueue *vq; + struct vring_desc *desc; + uint64_t vb_addr = 0; + uint32_t head[MAX_PKT_BURST]; + uint32_t used_idx; + uint32_t i; + uint16_t free_entries, entry_success = 0; + uint16_t avail_idx; + uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf) + + RTE_PKTMBUF_HEADROOM); -/* - * This function learns the MAC address of the device and registers this along with a - * vlan tag to a VMDQ. - */ -static int -link_vmdq(struct virtio_net *dev, struct rte_mbuf *m) -{ - struct ether_hdr *pkt_hdr; - struct virtio_net_data_ll *dev_ll; - int i, ret; + vq = dev->virtqueue[VIRTIO_TXQ]; + avail_idx = *((volatile uint16_t *)&vq->avail->idx); - /* Learn MAC address of guest device from packet */ - pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); + /* If there are no available buffers then return. */ + if (vq->last_used_idx == avail_idx) + return; - dev_ll = ll_root_used; + LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n", + dev->device_fh); - while (dev_ll != NULL) { - if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh); - return -1; - } - dev_ll = dev_ll->next; - } + /* Prefetch available ring to retrieve head indexes. */ + rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]); - for (i = 0; i < ETHER_ADDR_LEN; i++) - dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i]; + /*get the number of free entries in the ring*/ + free_entries = (avail_idx - vq->last_used_idx); - /* vlan_tag currently uses the device_id. */ - dev->vlan_tag = vlan_tags[dev->device_fh]; + /* Limit to MAX_PKT_BURST. */ + free_entries = RTE_MIN(free_entries, MAX_PKT_BURST); - /* Print out VMDQ registration info. */ - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n", - dev->device_fh, - dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1], - dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3], - dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5], - dev->vlan_tag); + LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", + dev->device_fh, free_entries); + /* Retrieve all of the head indexes first to avoid caching issues. */ + for (i = 0; i < free_entries; i++) + head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)]; - /* Register the MAC address. */ - ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh); - if (ret) - RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n", - dev->device_fh); + /* Prefetch descriptor index. */ + rte_prefetch0(&vq->desc[head[entry_success]]); + rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]); - /* Enable stripping of the vlan tag as we handle routing. */ - rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1); + while (entry_success < free_entries) { + uint32_t vb_avail, vb_offset; + uint32_t seg_avail, seg_offset; + uint32_t cpy_len; + uint32_t seg_num = 0; + struct rte_mbuf *cur; + uint8_t alloc_err = 0; - /* Set device as ready for RX. */ - dev->ready = DEVICE_RX; + desc = &vq->desc[head[entry_success]]; - return 0; -} + /* Discard first buffer as it is the virtio header */ + desc = &vq->desc[desc->next]; -/* - * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX - * queue before disabling RX on the device. - */ -static inline void -unlink_vmdq(struct virtio_net *dev) -{ - unsigned i = 0; - unsigned rx_count; - struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; - - if (dev->ready == DEVICE_RX) { - /*clear MAC and VLAN settings*/ - rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address); - for (i = 0; i < 6; i++) - dev->mac_address.addr_bytes[i] = 0; - - dev->vlan_tag = 0; - - /*Clear out the receive buffers*/ - rx_count = rte_eth_rx_burst(ports[0], - (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST); - - while (rx_count) { - for (i = 0; i < rx_count; i++) - rte_pktmbuf_free(pkts_burst[i]); - - rx_count = rte_eth_rx_burst(ports[0], - (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST); - } - - dev->ready = DEVICE_MAC_LEARNING; - } -} - -/* - * Check if the packet destination MAC address is for a local device. If so then put - * the packet on that devices RX queue. If not then return. - */ -static inline unsigned __attribute__((always_inline)) -virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m) -{ - struct virtio_net_data_ll *dev_ll; - struct ether_hdr *pkt_hdr; - uint64_t ret = 0; - - pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - - /*get the used devices list*/ - dev_ll = ll_root_used; - - while (dev_ll != NULL) { - if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr), - &dev_ll->dev->mac_address)) { - - /* Drop the packet if the TX packet is destined for the TX device. */ - if (dev_ll->dev->device_fh == dev->device_fh) { - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n", - dev_ll->dev->device_fh); - return 0; - } - - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh); - - if (dev_ll->dev->remove) { - /*drop the packet if the device is marked for removal*/ - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh); - } else { - uint32_t mergeable = - dev_ll->dev->features & - (1 << VIRTIO_NET_F_MRG_RXBUF); - - /*send the packet to the local virtio device*/ - if (likely(mergeable == 0)) - ret = virtio_dev_rx(dev_ll->dev, &m, 1); - else - ret = virtio_dev_merge_rx(dev_ll->dev, - &m, 1); - - if (enable_stats) { - rte_atomic64_add( - &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic, - 1); - rte_atomic64_add( - &dev_statistics[dev_ll->dev->device_fh].rx_atomic, - ret); - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx += ret; - } - } - - return 0; - } - dev_ll = dev_ll->next; - } - - return -1; -} - -/* - * This function routes the TX packet to the correct interface. This may be a local device - * or the physical port. - */ -static inline void __attribute__((always_inline)) -virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag) -{ - struct mbuf_table *tx_q; - struct vlan_ethhdr *vlan_hdr; - struct rte_mbuf **m_table; - struct rte_mbuf *mbuf, *prev; - unsigned len, ret, offset = 0; - const uint16_t lcore_id = rte_lcore_id(); - struct virtio_net_data_ll *dev_ll = ll_root_used; - struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - - /*check if destination is local VM*/ - if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0)) - return; - - if (vm2vm_mode == VM2VM_HARDWARE) { - while (dev_ll != NULL) { - if ((dev_ll->dev->ready == DEVICE_RX) - && ether_addr_cmp(&(pkt_hdr->d_addr), - &dev_ll->dev->mac_address)) { - /* - * Drop the packet if the TX packet is - * destined for the TX device. - */ - if (dev_ll->dev->device_fh == dev->device_fh) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: Source and destination" - " MAC addresses are the same. Dropping " - "packet.\n", - dev_ll->dev->device_fh); - return; - } - offset = 4; - vlan_tag = - (uint16_t) - vlan_tags[(uint16_t)dev_ll->dev->device_fh]; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: pkt to local VM device id:" - "(%"PRIu64") vlan tag: %d.\n", - dev->device_fh, dev_ll->dev->device_fh, - vlan_tag); - - break; - } - dev_ll = dev_ll->next; - } - } - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh); - - /*Add packet to the port tx queue*/ - tx_q = &lcore_tx_queue[lcore_id]; - len = tx_q->len; - - /* Allocate an mbuf and populate the structure. */ - mbuf = rte_pktmbuf_alloc(mbuf_pool); - if (unlikely(mbuf == NULL)) { - RTE_LOG(ERR, VHOST_DATA, - "Failed to allocate memory for mbuf.\n"); - return; - } - - mbuf->data_len = m->data_len + VLAN_HLEN + offset; - mbuf->pkt_len = m->pkt_len + VLAN_HLEN + offset; - mbuf->nb_segs = m->nb_segs; - - /* Copy ethernet header to mbuf. */ - rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), - rte_pktmbuf_mtod(m, const void *), - ETH_HLEN); - - - /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/ - vlan_hdr = rte_pktmbuf_mtod(mbuf, struct vlan_ethhdr *); - vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto; - vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q); - vlan_hdr->h_vlan_TCI = htons(vlan_tag); - - /* Copy the remaining packet contents to the mbuf. */ - rte_memcpy((void *)(rte_pktmbuf_mtod(mbuf, uint8_t *) + VLAN_ETH_HLEN), - (const void *)(rte_pktmbuf_mtod(m, uint8_t *) + ETH_HLEN), - (m->data_len - ETH_HLEN)); - - /* Copy the remaining segments for the whole packet. */ - prev = mbuf; - while (m->next) { - /* Allocate an mbuf and populate the structure. */ - struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool); - if (unlikely(next_mbuf == NULL)) { - rte_pktmbuf_free(mbuf); - RTE_LOG(ERR, VHOST_DATA, - "Failed to allocate memory for mbuf.\n"); - return; - } - - m = m->next; - prev->next = next_mbuf; - prev = next_mbuf; - next_mbuf->data_len = m->data_len; - - /* Copy data to next mbuf. */ - rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *), - rte_pktmbuf_mtod(m, const void *), m->data_len); - } - - tx_q->m_table[len] = mbuf; - len++; - if (enable_stats) { - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx++; - } - - if (unlikely(len == MAX_PKT_BURST)) { - m_table = (struct rte_mbuf **)tx_q->m_table; - ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len); - /* Free any buffers not handled by TX and update the port stats. */ - if (unlikely(ret < len)) { - do { - rte_pktmbuf_free(m_table[ret]); - } while (++ret < len); - } - - len = 0; - } - - tx_q->len = len; - return; -} - -static inline void __attribute__((always_inline)) -virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool) -{ - struct rte_mbuf m; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - uint64_t buff_addr = 0; - uint32_t head[MAX_PKT_BURST]; - uint32_t used_idx; - uint32_t i; - uint16_t free_entries, packet_success = 0; - uint16_t avail_idx; - - vq = dev->virtqueue[VIRTIO_TXQ]; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - - /* If there are no available buffers then return. */ - if (vq->last_used_idx == avail_idx) - return; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh); - - /* Prefetch available ring to retrieve head indexes. */ - rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]); - - /*get the number of free entries in the ring*/ - free_entries = (avail_idx - vq->last_used_idx); - - /* Limit to MAX_PKT_BURST. */ - if (free_entries > MAX_PKT_BURST) - free_entries = MAX_PKT_BURST; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries); - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (i = 0; i < free_entries; i++) - head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)]; - - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]); - - while (packet_success < free_entries) { - desc = &vq->desc[head[packet_success]]; - - /* Discard first buffer as it is the virtio header */ - desc = &vq->desc[desc->next]; - - /* Buffer address translation. */ - buff_addr = gpa_to_vva(dev, desc->addr); - /* Prefetch buffer address. */ - rte_prefetch0((void*)(uintptr_t)buff_addr); - - used_idx = vq->last_used_idx & (vq->size - 1); - - if (packet_success < (free_entries - 1)) { - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success+1]]); - rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]); - } - - /* Update used index buffer information. */ - vq->used->ring[used_idx].id = head[packet_success]; - vq->used->ring[used_idx].len = 0; - - /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */ - m.data_len = desc->len; - m.pkt_len = desc->len; - m.data_off = 0; - - PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0); - - /* If this is the first received packet we need to learn the MAC and setup VMDQ */ - if (dev->ready == DEVICE_MAC_LEARNING) { - if (dev->remove || (link_vmdq(dev, &m) == -1)) { - /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */ - packet_success += free_entries; - vq->last_used_idx += packet_success; - break; - } - } - virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh); - - vq->last_used_idx++; - packet_success++; - } - - rte_compiler_barrier(); - vq->used->idx += packet_success; - /* Kick guest if required. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write((int)vq->kickfd, 1); -} - -/* This function works for TX packets with mergeable feature enabled. */ -static inline void __attribute__((always_inline)) -virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool) -{ - struct rte_mbuf *m, *prev; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - uint64_t vb_addr = 0; - uint32_t head[MAX_PKT_BURST]; - uint32_t used_idx; - uint32_t i; - uint16_t free_entries, entry_success = 0; - uint16_t avail_idx; - uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf) - + RTE_PKTMBUF_HEADROOM); - - vq = dev->virtqueue[VIRTIO_TXQ]; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - - /* If there are no available buffers then return. */ - if (vq->last_used_idx == avail_idx) - return; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n", - dev->device_fh); - - /* Prefetch available ring to retrieve head indexes. */ - rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]); - - /*get the number of free entries in the ring*/ - free_entries = (avail_idx - vq->last_used_idx); - - /* Limit to MAX_PKT_BURST. */ - free_entries = RTE_MIN(free_entries, MAX_PKT_BURST); - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", - dev->device_fh, free_entries); - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (i = 0; i < free_entries; i++) - head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)]; - - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[entry_success]]); - rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]); - - while (entry_success < free_entries) { - uint32_t vb_avail, vb_offset; - uint32_t seg_avail, seg_offset; - uint32_t cpy_len; - uint32_t seg_num = 0; - struct rte_mbuf *cur; - uint8_t alloc_err = 0; - - desc = &vq->desc[head[entry_success]]; - - /* Discard first buffer as it is the virtio header */ - desc = &vq->desc[desc->next]; - - /* Buffer address translation. */ - vb_addr = gpa_to_vva(dev, desc->addr); - /* Prefetch buffer address. */ - rte_prefetch0((void *)(uintptr_t)vb_addr); + /* Buffer address translation. */ + vb_addr = gpa_to_vva(dev, desc->addr); + /* Prefetch buffer address. */ + rte_prefetch0((void *)(uintptr_t)vb_addr); used_idx = vq->last_used_idx & (vq->size - 1); @@ -2027,1701 +792,3 @@ virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool) eventfd_write((int)vq->kickfd, 1); } - -/* - * This function is called by each data core. It handles all RX/TX registered with the - * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared - * with all devices in the main linked list. - */ -static int -switch_worker(__attribute__((unused)) void *arg) -{ - struct rte_mempool *mbuf_pool = arg; - struct virtio_net *dev = NULL; - struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; - struct virtio_net_data_ll *dev_ll; - struct mbuf_table *tx_q; - volatile struct lcore_ll_info *lcore_ll; - const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US; - uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0; - unsigned ret, i; - const uint16_t lcore_id = rte_lcore_id(); - const uint16_t num_cores = (uint16_t)rte_lcore_count(); - uint16_t rx_count = 0; - uint32_t mergeable = 0; - - RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id); - lcore_ll = lcore_info[lcore_id].lcore_ll; - prev_tsc = 0; - - tx_q = &lcore_tx_queue[lcore_id]; - for (i = 0; i < num_cores; i ++) { - if (lcore_ids[i] == lcore_id) { - tx_q->txq_id = i; - break; - } - } - - while(1) { - cur_tsc = rte_rdtsc(); - /* - * TX burst queue drain - */ - diff_tsc = cur_tsc - prev_tsc; - if (unlikely(diff_tsc > drain_tsc)) { - - if (tx_q->len) { - LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len); - - /*Tx any packets in the queue*/ - ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, - (struct rte_mbuf **)tx_q->m_table, - (uint16_t)tx_q->len); - if (unlikely(ret < tx_q->len)) { - do { - rte_pktmbuf_free(tx_q->m_table[ret]); - } while (++ret < tx_q->len); - } - - tx_q->len = 0; - } - - prev_tsc = cur_tsc; - - } - - rte_prefetch0(lcore_ll->ll_root_used); - /* - * Inform the configuration core that we have exited the linked list and that no devices are - * in use if requested. - */ - if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL) - lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - - /* - * Process devices - */ - dev_ll = lcore_ll->ll_root_used; - - while (dev_ll != NULL) { - /*get virtio device ID*/ - dev = dev_ll->dev; - mergeable = - dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF); - - if (dev->remove) { - dev_ll = dev_ll->next; - unlink_vmdq(dev); - dev->ready = DEVICE_SAFE_REMOVE; - continue; - } - if (likely(dev->ready == DEVICE_RX)) { - /*Handle guest RX*/ - rx_count = rte_eth_rx_burst(ports[0], - (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST); - - if (rx_count) { - if (likely(mergeable == 0)) - ret_count = - virtio_dev_rx(dev, - pkts_burst, rx_count); - else - ret_count = - virtio_dev_merge_rx(dev, - pkts_burst, rx_count); - - if (enable_stats) { - rte_atomic64_add( - &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic, - rx_count); - rte_atomic64_add( - &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count); - } - while (likely(rx_count)) { - rx_count--; - rte_pktmbuf_free(pkts_burst[rx_count]); - } - - } - } - - if (!dev->remove) { - /*Handle guest TX*/ - if (likely(mergeable == 0)) - virtio_dev_tx(dev, mbuf_pool); - else - virtio_dev_merge_tx(dev, mbuf_pool); - } - - /*move to the next device in the list*/ - dev_ll = dev_ll->next; - } - } - - return 0; -} - -/* - * This function gets available ring number for zero copy rx. - * Only one thread will call this funciton for a paticular virtio device, - * so, it is designed as non-thread-safe function. - */ -static inline uint32_t __attribute__((always_inline)) -get_available_ring_num_zcp(struct virtio_net *dev) -{ - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ]; - uint16_t avail_idx; - - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - return (uint32_t)(avail_idx - vq->last_used_idx_res); -} - -/* - * This function gets available ring index for zero copy rx, - * it will retry 'burst_rx_retry_num' times till it get enough ring index. - * Only one thread will call this funciton for a paticular virtio device, - * so, it is designed as non-thread-safe function. - */ -static inline uint32_t __attribute__((always_inline)) -get_available_ring_index_zcp(struct virtio_net *dev, - uint16_t *res_base_idx, uint32_t count) -{ - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ]; - uint16_t avail_idx; - uint32_t retry = 0; - uint16_t free_entries; - - *res_base_idx = vq->last_used_idx_res; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - free_entries = (avail_idx - *res_base_idx); - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: " - "avail idx: %d, " - "res base idx:%d, free entries:%d\n", - dev->device_fh, avail_idx, *res_base_idx, - free_entries); - - /* - * If retry is enabled and the queue is full then we wait - * and retry to avoid packet loss. - */ - if (enable_retry && unlikely(count > free_entries)) { - for (retry = 0; retry < burst_rx_retry_num; retry++) { - rte_delay_us(burst_rx_delay_time); - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - free_entries = (avail_idx - *res_base_idx); - if (count <= free_entries) - break; - } - } - - /*check that we have enough buffers*/ - if (unlikely(count > free_entries)) - count = free_entries; - - if (unlikely(count == 0)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") Fail in get_available_ring_index_zcp: " - "avail idx: %d, res base idx:%d, free entries:%d\n", - dev->device_fh, avail_idx, - *res_base_idx, free_entries); - return 0; - } - - vq->last_used_idx_res = *res_base_idx + count; - - return count; -} - -/* - * This function put descriptor back to used list. - */ -static inline void __attribute__((always_inline)) -put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx) -{ - uint16_t res_cur_idx = vq->last_used_idx; - vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx; - vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0; - rte_compiler_barrier(); - *(volatile uint16_t *)&vq->used->idx += 1; - vq->last_used_idx += 1; - - /* Kick the guest if necessary. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write((int)vq->kickfd, 1); -} - -/* - * This function get available descriptor from vitio vring and un-attached mbuf - * from vpool->ring, and then attach them together. It needs adjust the offset - * for buff_addr and phys_addr accroding to PMD implementation, otherwise the - * frame data may be put to wrong location in mbuf. - */ -static inline void __attribute__((always_inline)) -attach_rxmbuf_zcp(struct virtio_net *dev) -{ - uint16_t res_base_idx, desc_idx; - uint64_t buff_addr, phys_addr; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - struct rte_mbuf *mbuf = NULL; - struct vpool *vpool; - hpa_type addr_type; - - vpool = &vpool_array[dev->vmdq_rx_q]; - vq = dev->virtqueue[VIRTIO_RXQ]; - - do { - if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx, - 1) != 1)) - return; - desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)]; - - desc = &vq->desc[desc_idx]; - if (desc->flags & VRING_DESC_F_NEXT) { - desc = &vq->desc[desc->next]; - buff_addr = gpa_to_vva(dev, desc->addr); - phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, - &addr_type); - } else { - buff_addr = gpa_to_vva(dev, - desc->addr + vq->vhost_hlen); - phys_addr = gpa_to_hpa(dev, - desc->addr + vq->vhost_hlen, - desc->len, &addr_type); - } - - if (unlikely(addr_type == PHYS_ADDR_INVALID)) { - RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer" - " address found when attaching RX frame buffer" - " address!\n", dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - continue; - } - - /* - * Check if the frame buffer address from guest crosses - * sub-region or not. - */ - if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Frame buffer address cross " - "sub-regioin found when attaching RX frame " - "buffer address!\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - continue; - } - } while (unlikely(phys_addr == 0)); - - rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf); - if (unlikely(mbuf == NULL)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: " - "ring_sc_dequeue fail.\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - return; - } - - if (unlikely(vpool->buf_size > desc->len)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer " - "length(%d) of descriptor idx: %d less than room " - "size required: %d\n", - dev->device_fh, desc->len, desc_idx, vpool->buf_size); - put_desc_to_used_list_zcp(vq, desc_idx); - rte_ring_sp_enqueue(vpool->ring, (void *)mbuf); - return; - } - - mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM); - mbuf->data_off = RTE_PKTMBUF_HEADROOM; - mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM; - mbuf->data_len = desc->len; - MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, " - "descriptor idx:%d\n", - dev->device_fh, res_base_idx, desc_idx); - - __rte_mbuf_raw_free(mbuf); - - return; -} - -/* - * Detach an attched packet mbuf - - * - restore original mbuf address and length values. - * - reset pktmbuf data and data_len to their default values. - * All other fields of the given packet mbuf will be left intact. - * - * @param m - * The attached packet mbuf. - */ -static inline void pktmbuf_detach_zcp(struct rte_mbuf *m) -{ - const struct rte_mempool *mp = m->pool; - void *buf = RTE_MBUF_TO_BADDR(m); - uint32_t buf_ofs; - uint32_t buf_len = mp->elt_size - sizeof(*m); - m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m); - - m->buf_addr = buf; - m->buf_len = (uint16_t)buf_len; - - buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ? - RTE_PKTMBUF_HEADROOM : m->buf_len; - m->data_off = buf_ofs; - - m->data_len = 0; -} - -/* - * This function is called after packets have been transimited. It fetchs mbuf - * from vpool->pool, detached it and put into vpool->ring. It also update the - * used index and kick the guest if necessary. - */ -static inline uint32_t __attribute__((always_inline)) -txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool) -{ - struct rte_mbuf *mbuf; - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ]; - uint32_t used_idx = vq->last_used_idx & (vq->size - 1); - uint32_t index = 0; - uint32_t mbuf_count = rte_mempool_count(vpool->pool); - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before " - "clean is: %d\n", - dev->device_fh, mbuf_count); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before " - "clean is : %d\n", - dev->device_fh, rte_ring_count(vpool->ring)); - - for (index = 0; index < mbuf_count; index++) { - mbuf = __rte_mbuf_raw_alloc(vpool->pool); - if (likely(RTE_MBUF_INDIRECT(mbuf))) - pktmbuf_detach_zcp(mbuf); - rte_ring_sp_enqueue(vpool->ring, mbuf); - - /* Update used index buffer information. */ - vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf); - vq->used->ring[used_idx].len = 0; - - used_idx = (used_idx + 1) & (vq->size - 1); - } - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after " - "clean is: %d\n", - dev->device_fh, rte_mempool_count(vpool->pool)); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after " - "clean is : %d\n", - dev->device_fh, rte_ring_count(vpool->ring)); - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: before updated " - "vq->last_used_idx:%d\n", - dev->device_fh, vq->last_used_idx); - - vq->last_used_idx += mbuf_count; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in txmbuf_clean_zcp: after updated " - "vq->last_used_idx:%d\n", - dev->device_fh, vq->last_used_idx); - - rte_compiler_barrier(); - - *(volatile uint16_t *)&vq->used->idx += mbuf_count; - - /* Kick guest if required. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write((int)vq->kickfd, 1); - - return 0; -} - -/* - * This function is called when a virtio device is destroy. - * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring. - */ -static void mbuf_destroy_zcp(struct vpool *vpool) -{ - struct rte_mbuf *mbuf = NULL; - uint32_t index, mbuf_count = rte_mempool_count(vpool->pool); - - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in mempool before " - "mbuf_destroy_zcp is: %d\n", - mbuf_count); - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in ring before " - "mbuf_destroy_zcp is : %d\n", - rte_ring_count(vpool->ring)); - - for (index = 0; index < mbuf_count; index++) { - mbuf = __rte_mbuf_raw_alloc(vpool->pool); - if (likely(mbuf != NULL)) { - if (likely(RTE_MBUF_INDIRECT(mbuf))) - pktmbuf_detach_zcp(mbuf); - rte_ring_sp_enqueue(vpool->ring, (void *)mbuf); - } - } - - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in mempool after " - "mbuf_destroy_zcp is: %d\n", - rte_mempool_count(vpool->pool)); - LOG_DEBUG(VHOST_CONFIG, - "in mbuf_destroy_zcp: mbuf count in ring after " - "mbuf_destroy_zcp is : %d\n", - rte_ring_count(vpool->ring)); -} - -/* - * This function update the use flag and counter. - */ -static inline uint32_t __attribute__((always_inline)) -virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts, - uint32_t count) -{ - struct vhost_virtqueue *vq; - struct vring_desc *desc; - struct rte_mbuf *buff; - /* The virtio_hdr is initialised to 0. */ - struct virtio_net_hdr_mrg_rxbuf virtio_hdr - = {{0, 0, 0, 0, 0, 0}, 0}; - uint64_t buff_hdr_addr = 0; - uint32_t head[MAX_PKT_BURST], packet_len = 0; - uint32_t head_idx, packet_success = 0; - uint16_t res_cur_idx; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh); - - if (count == 0) - return 0; - - vq = dev->virtqueue[VIRTIO_RXQ]; - count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count; - - res_cur_idx = vq->last_used_idx; - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", - dev->device_fh, res_cur_idx, res_cur_idx + count); - - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (head_idx = 0; head_idx < count; head_idx++) - head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]); - - /*Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - - while (packet_success != count) { - /* Get descriptor from available ring */ - desc = &vq->desc[head[packet_success]]; - - buff = pkts[packet_success]; - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: update the used idx for " - "pkt[%d] descriptor idx: %d\n", - dev->device_fh, packet_success, - MBUF_HEADROOM_UINT32(buff)); - - PRINT_PACKET(dev, - (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr) - + RTE_PKTMBUF_HEADROOM), - rte_pktmbuf_data_len(buff), 0); - - /* Buffer address translation for virtio header. */ - buff_hdr_addr = gpa_to_vva(dev, desc->addr); - packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen; - - /* - * If the descriptors are chained the header and data are - * placed in separate buffers. - */ - if (desc->flags & VRING_DESC_F_NEXT) { - desc->len = vq->vhost_hlen; - desc = &vq->desc[desc->next]; - desc->len = rte_pktmbuf_data_len(buff); - } else { - desc->len = packet_len; - } - - /* Update used ring with desc information */ - vq->used->ring[res_cur_idx & (vq->size - 1)].id - = head[packet_success]; - vq->used->ring[res_cur_idx & (vq->size - 1)].len - = packet_len; - res_cur_idx++; - packet_success++; - - /* A header is required per buffer. */ - rte_memcpy((void *)(uintptr_t)buff_hdr_addr, - (const void *)&virtio_hdr, vq->vhost_hlen); - - PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1); - - if (likely(packet_success < count)) { - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - } - } - - rte_compiler_barrier(); - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: before update used idx: " - "vq.last_used_idx: %d, vq->used->idx: %d\n", - dev->device_fh, vq->last_used_idx, vq->used->idx); - - *(volatile uint16_t *)&vq->used->idx += count; - vq->last_used_idx += count; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in dev_rx_zcp: after update used idx: " - "vq.last_used_idx: %d, vq->used->idx: %d\n", - dev->device_fh, vq->last_used_idx, vq->used->idx); - - /* Kick the guest if necessary. */ - if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) - eventfd_write((int)vq->kickfd, 1); - - return count; -} - -/* - * This function routes the TX packet to the correct interface. - * This may be a local device or the physical port. - */ -static inline void __attribute__((always_inline)) -virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m, - uint32_t desc_idx, uint8_t need_copy) -{ - struct mbuf_table *tx_q; - struct rte_mbuf **m_table; - struct rte_mbuf *mbuf = NULL; - unsigned len, ret, offset = 0; - struct vpool *vpool; - struct virtio_net_data_ll *dev_ll = ll_root_used; - struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); - uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh]; - - /*Add packet to the port tx queue*/ - tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q]; - len = tx_q->len; - - /* Allocate an mbuf and populate the structure. */ - vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q]; - rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf); - if (unlikely(mbuf == NULL)) { - struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ]; - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Failed to allocate memory for mbuf.\n", - dev->device_fh); - put_desc_to_used_list_zcp(vq, desc_idx); - return; - } - - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Avoid using a vlan tag from any vm for external pkt, such as - * vlan_tags[dev->device_fh], oterwise, it conflicts when pool - * selection, MAC address determines it as an external pkt - * which should go to network, while vlan tag determine it as - * a vm2vm pkt should forward to another vm. Hardware confuse - * such a ambiguous situation, so pkt will lost. - */ - vlan_tag = external_pkt_default_vlan_tag; - while (dev_ll != NULL) { - if (likely(dev_ll->dev->ready == DEVICE_RX) && - ether_addr_cmp(&(pkt_hdr->d_addr), - &dev_ll->dev->mac_address)) { - - /* - * Drop the packet if the TX packet is destined - * for the TX device. - */ - if (unlikely(dev_ll->dev->device_fh - == dev->device_fh)) { - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: Source and destination" - "MAC addresses are the same. Dropping " - "packet.\n", - dev_ll->dev->device_fh); - MBUF_HEADROOM_UINT32(mbuf) - = (uint32_t)desc_idx; - __rte_mbuf_raw_free(mbuf); - return; - } - - /* - * Packet length offset 4 bytes for HW vlan - * strip when L2 switch back. - */ - offset = 4; - vlan_tag = - (uint16_t) - vlan_tags[(uint16_t)dev_ll->dev->device_fh]; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") TX: pkt to local VM device id:" - "(%"PRIu64") vlan tag: %d.\n", - dev->device_fh, dev_ll->dev->device_fh, - vlan_tag); - - break; - } - dev_ll = dev_ll->next; - } - } - - mbuf->nb_segs = m->nb_segs; - mbuf->next = m->next; - mbuf->data_len = m->data_len + offset; - mbuf->pkt_len = mbuf->data_len; - if (unlikely(need_copy)) { - /* Copy the packet contents to the mbuf. */ - rte_memcpy(rte_pktmbuf_mtod(mbuf, void *), - rte_pktmbuf_mtod(m, void *), - m->data_len); - } else { - mbuf->data_off = m->data_off; - mbuf->buf_physaddr = m->buf_physaddr; - mbuf->buf_addr = m->buf_addr; - } - mbuf->ol_flags = PKT_TX_VLAN_PKT; - mbuf->vlan_tci = vlan_tag; - mbuf->l2_len = sizeof(struct ether_hdr); - mbuf->l3_len = sizeof(struct ipv4_hdr); - MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx; - - tx_q->m_table[len] = mbuf; - len++; - - LOG_DEBUG(VHOST_DATA, - "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n", - dev->device_fh, - mbuf->nb_segs, - (mbuf->next == NULL) ? "null" : "non-null"); - - if (enable_stats) { - dev_statistics[dev->device_fh].tx_total++; - dev_statistics[dev->device_fh].tx++; - } - - if (unlikely(len == MAX_PKT_BURST)) { - m_table = (struct rte_mbuf **)tx_q->m_table; - ret = rte_eth_tx_burst(ports[0], - (uint16_t)tx_q->txq_id, m_table, (uint16_t) len); - - /* - * Free any buffers not handled by TX and update - * the port stats. - */ - if (unlikely(ret < len)) { - do { - rte_pktmbuf_free(m_table[ret]); - } while (++ret < len); - } - - len = 0; - txmbuf_clean_zcp(dev, vpool); - } - - tx_q->len = len; - - return; -} - -/* - * This function TX all available packets in virtio TX queue for one - * virtio-net device. If it is first packet, it learns MAC address and - * setup VMDQ. - */ -static inline void __attribute__((always_inline)) -virtio_dev_tx_zcp(struct virtio_net *dev) -{ - struct rte_mbuf m; - struct vhost_virtqueue *vq; - struct vring_desc *desc; - uint64_t buff_addr = 0, phys_addr; - uint32_t head[MAX_PKT_BURST]; - uint32_t i; - uint16_t free_entries, packet_success = 0; - uint16_t avail_idx; - uint8_t need_copy = 0; - hpa_type addr_type; - - vq = dev->virtqueue[VIRTIO_TXQ]; - avail_idx = *((volatile uint16_t *)&vq->avail->idx); - - /* If there are no available buffers then return. */ - if (vq->last_used_idx_res == avail_idx) - return; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh); - - /* Prefetch available ring to retrieve head indexes. */ - rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]); - - /* Get the number of free entries in the ring */ - free_entries = (avail_idx - vq->last_used_idx_res); - - /* Limit to MAX_PKT_BURST. */ - free_entries - = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries; - - LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", - dev->device_fh, free_entries); - - /* Retrieve all of the head indexes first to avoid caching issues. */ - for (i = 0; i < free_entries; i++) - head[i] - = vq->avail->ring[(vq->last_used_idx_res + i) - & (vq->size - 1)]; - - vq->last_used_idx_res += free_entries; - - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success]]); - rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]); - - while (packet_success < free_entries) { - desc = &vq->desc[head[packet_success]]; - - /* Discard first buffer as it is the virtio header */ - desc = &vq->desc[desc->next]; - - /* Buffer address translation. */ - buff_addr = gpa_to_vva(dev, desc->addr); - phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type); - - if (likely(packet_success < (free_entries - 1))) - /* Prefetch descriptor index. */ - rte_prefetch0(&vq->desc[head[packet_success + 1]]); - - if (unlikely(addr_type == PHYS_ADDR_INVALID)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Invalid frame buffer address found" - "when TX packets!\n", - dev->device_fh); - packet_success++; - continue; - } - - /* Prefetch buffer address. */ - rte_prefetch0((void *)(uintptr_t)buff_addr); - - /* - * Setup dummy mbuf. This is copied to a real mbuf if - * transmitted out the physical port. - */ - m.data_len = desc->len; - m.nb_segs = 1; - m.next = NULL; - m.data_off = 0; - m.buf_addr = (void *)(uintptr_t)buff_addr; - m.buf_physaddr = phys_addr; - - /* - * Check if the frame buffer address from guest crosses - * sub-region or not. - */ - if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) { - RTE_LOG(ERR, VHOST_DATA, - "(%"PRIu64") Frame buffer address cross " - "sub-regioin found when attaching TX frame " - "buffer address!\n", - dev->device_fh); - need_copy = 1; - } else - need_copy = 0; - - PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0); - - /* - * If this is the first received packet we need to learn - * the MAC and setup VMDQ - */ - if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) { - if (dev->remove || (link_vmdq(dev, &m) == -1)) { - /* - * Discard frame if device is scheduled for - * removal or a duplicate MAC address is found. - */ - packet_success += free_entries; - vq->last_used_idx += packet_success; - break; - } - } - - virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy); - packet_success++; - } -} - -/* - * This function is called by each data core. It handles all RX/TX registered - * with the core. For TX the specific lcore linked list is used. For RX, MAC - * addresses are compared with all devices in the main linked list. - */ -static int -switch_worker_zcp(__attribute__((unused)) void *arg) -{ - struct virtio_net *dev = NULL; - struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; - struct virtio_net_data_ll *dev_ll; - struct mbuf_table *tx_q; - volatile struct lcore_ll_info *lcore_ll; - const uint64_t drain_tsc - = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S - * BURST_TX_DRAIN_US; - uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0; - unsigned ret; - const uint16_t lcore_id = rte_lcore_id(); - uint16_t count_in_ring, rx_count = 0; - - RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id); - - lcore_ll = lcore_info[lcore_id].lcore_ll; - prev_tsc = 0; - - while (1) { - cur_tsc = rte_rdtsc(); - - /* TX burst queue drain */ - diff_tsc = cur_tsc - prev_tsc; - if (unlikely(diff_tsc > drain_tsc)) { - /* - * Get mbuf from vpool.pool and detach mbuf and - * put back into vpool.ring. - */ - dev_ll = lcore_ll->ll_root_used; - while ((dev_ll != NULL) && (dev_ll->dev != NULL)) { - /* Get virtio device ID */ - dev = dev_ll->dev; - - if (likely(!dev->remove)) { - tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q]; - if (tx_q->len) { - LOG_DEBUG(VHOST_DATA, - "TX queue drained after timeout" - " with burst size %u\n", - tx_q->len); - - /* - * Tx any packets in the queue - */ - ret = rte_eth_tx_burst( - ports[0], - (uint16_t)tx_q->txq_id, - (struct rte_mbuf **) - tx_q->m_table, - (uint16_t)tx_q->len); - if (unlikely(ret < tx_q->len)) { - do { - rte_pktmbuf_free( - tx_q->m_table[ret]); - } while (++ret < tx_q->len); - } - tx_q->len = 0; - - txmbuf_clean_zcp(dev, - &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]); - } - } - dev_ll = dev_ll->next; - } - prev_tsc = cur_tsc; - } - - rte_prefetch0(lcore_ll->ll_root_used); - - /* - * Inform the configuration core that we have exited the linked - * list and that no devices are in use if requested. - */ - if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL) - lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - - /* Process devices */ - dev_ll = lcore_ll->ll_root_used; - - while ((dev_ll != NULL) && (dev_ll->dev != NULL)) { - dev = dev_ll->dev; - if (unlikely(dev->remove)) { - dev_ll = dev_ll->next; - unlink_vmdq(dev); - dev->ready = DEVICE_SAFE_REMOVE; - continue; - } - - if (likely(dev->ready == DEVICE_RX)) { - uint32_t index = dev->vmdq_rx_q; - uint16_t i; - count_in_ring - = rte_ring_count(vpool_array[index].ring); - uint16_t free_entries - = (uint16_t)get_available_ring_num_zcp(dev); - - /* - * Attach all mbufs in vpool.ring and put back - * into vpool.pool. - */ - for (i = 0; - i < RTE_MIN(free_entries, - RTE_MIN(count_in_ring, MAX_PKT_BURST)); - i++) - attach_rxmbuf_zcp(dev); - - /* Handle guest RX */ - rx_count = rte_eth_rx_burst(ports[0], - (uint16_t)dev->vmdq_rx_q, pkts_burst, - MAX_PKT_BURST); - - if (rx_count) { - ret_count = virtio_dev_rx_zcp(dev, - pkts_burst, rx_count); - if (enable_stats) { - dev_statistics[dev->device_fh].rx_total - += rx_count; - dev_statistics[dev->device_fh].rx - += ret_count; - } - while (likely(rx_count)) { - rx_count--; - pktmbuf_detach_zcp( - pkts_burst[rx_count]); - rte_ring_sp_enqueue( - vpool_array[index].ring, - (void *)pkts_burst[rx_count]); - } - } - } - - if (likely(!dev->remove)) - /* Handle guest TX */ - virtio_dev_tx_zcp(dev); - - /* Move to the next device in the list */ - dev_ll = dev_ll->next; - } - } - - return 0; -} - - -/* - * Add an entry to a used linked list. A free entry must first be found - * in the free linked list using get_data_ll_free_entry(); - */ -static void -add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev) -{ - struct virtio_net_data_ll *ll = *ll_root_addr; - - /* Set next as NULL and use a compiler barrier to avoid reordering. */ - ll_dev->next = NULL; - rte_compiler_barrier(); - - /* If ll == NULL then this is the first device. */ - if (ll) { - /* Increment to the tail of the linked list. */ - while ((ll->next != NULL) ) - ll = ll->next; - - ll->next = ll_dev; - } else { - *ll_root_addr = ll_dev; - } -} - -/* - * Remove an entry from a used linked list. The entry must then be added to - * the free linked list using put_data_ll_free_entry(). - */ -static void -rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev, - struct virtio_net_data_ll *ll_dev_last) -{ - struct virtio_net_data_ll *ll = *ll_root_addr; - - if (unlikely((ll == NULL) || (ll_dev == NULL))) - return; - - if (ll_dev == ll) - *ll_root_addr = ll_dev->next; - else - if (likely(ll_dev_last != NULL)) - ll_dev_last->next = ll_dev->next; - else - RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n"); -} - -/* - * Find and return an entry from the free linked list. - */ -static struct virtio_net_data_ll * -get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr) -{ - struct virtio_net_data_ll *ll_free = *ll_root_addr; - struct virtio_net_data_ll *ll_dev; - - if (ll_free == NULL) - return NULL; - - ll_dev = ll_free; - *ll_root_addr = ll_free->next; - - return ll_dev; -} - -/* - * Place an entry back on to the free linked list. - */ -static void -put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr, - struct virtio_net_data_ll *ll_dev) -{ - struct virtio_net_data_ll *ll_free = *ll_root_addr; - - if (ll_dev == NULL) - return; - - ll_dev->next = ll_free; - *ll_root_addr = ll_dev; -} - -/* - * Creates a linked list of a given size. - */ -static struct virtio_net_data_ll * -alloc_data_ll(uint32_t size) -{ - struct virtio_net_data_ll *ll_new; - uint32_t i; - - /* Malloc and then chain the linked list. */ - ll_new = malloc(size * sizeof(struct virtio_net_data_ll)); - if (ll_new == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n"); - return NULL; - } - - for (i = 0; i < size - 1; i++) { - ll_new[i].dev = NULL; - ll_new[i].next = &ll_new[i+1]; - } - ll_new[i].next = NULL; - - return (ll_new); -} - -/* - * Create the main linked list along with each individual cores linked list. A used and a free list - * are created to manage entries. - */ -static int -init_data_ll (void) -{ - int lcore; - - RTE_LCORE_FOREACH_SLAVE(lcore) { - lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info)); - if (lcore_info[lcore].lcore_ll == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n"); - return -1; - } - - lcore_info[lcore].lcore_ll->device_num = 0; - lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL; - lcore_info[lcore].lcore_ll->ll_root_used = NULL; - if (num_devices % num_switching_cores) - lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1); - else - lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores); - } - - /* Allocate devices up to a maximum of MAX_DEVICES. */ - ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES)); - - return 0; -} - -/* - * Set virtqueue flags so that we do not receive interrupts. - */ -static void -set_irq_status (struct virtio_net *dev) -{ - dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY; - dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY; -} - -/* - * Remove a device from the specific data core linked list and from the main linked list. Synchonization - * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering - * of dev->remove=1 which can cause an infinite loop in the rte_pause loop. - */ -static void -destroy_device (volatile struct virtio_net *dev) -{ - struct virtio_net_data_ll *ll_lcore_dev_cur; - struct virtio_net_data_ll *ll_main_dev_cur; - struct virtio_net_data_ll *ll_lcore_dev_last = NULL; - struct virtio_net_data_ll *ll_main_dev_last = NULL; - int lcore; - - dev->flags &= ~VIRTIO_DEV_RUNNING; - - /*set the remove flag. */ - dev->remove = 1; - - while(dev->ready != DEVICE_SAFE_REMOVE) { - rte_pause(); - } - - /* Search for entry to be removed from lcore ll */ - ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used; - while (ll_lcore_dev_cur != NULL) { - if (ll_lcore_dev_cur->dev == dev) { - break; - } else { - ll_lcore_dev_last = ll_lcore_dev_cur; - ll_lcore_dev_cur = ll_lcore_dev_cur->next; - } - } - - if (ll_lcore_dev_cur == NULL) { - RTE_LOG(ERR, VHOST_CONFIG, - "(%"PRIu64") Failed to find the dev to be destroy.\n", - dev->device_fh); - return; - } - - /* Search for entry to be removed from main ll */ - ll_main_dev_cur = ll_root_used; - ll_main_dev_last = NULL; - while (ll_main_dev_cur != NULL) { - if (ll_main_dev_cur->dev == dev) { - break; - } else { - ll_main_dev_last = ll_main_dev_cur; - ll_main_dev_cur = ll_main_dev_cur->next; - } - } - - /* Remove entries from the lcore and main ll. */ - rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last); - rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last); - - /* Set the dev_removal_flag on each lcore. */ - RTE_LCORE_FOREACH_SLAVE(lcore) { - lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL; - } - - /* - * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that - * they can no longer access the device removed from the linked lists and that the devices - * are no longer in use. - */ - RTE_LCORE_FOREACH_SLAVE(lcore) { - while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) { - rte_pause(); - } - } - - /* Add the entries back to the lcore and main free ll.*/ - put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur); - put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur); - - /* Decrement number of device on the lcore. */ - lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--; - - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh); - - if (zero_copy) { - struct vpool *vpool = &vpool_array[dev->vmdq_rx_q]; - - /* Stop the RX queue. */ - if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In destroy_device: Failed to stop " - "rx queue:%d\n", - dev->device_fh, - dev->vmdq_rx_q); - } - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in destroy_device: Start put mbuf in " - "mempool back to ring for RX queue: %d\n", - dev->device_fh, dev->vmdq_rx_q); - - mbuf_destroy_zcp(vpool); - - /* Stop the TX queue. */ - if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In destroy_device: Failed to " - "stop tx queue:%d\n", - dev->device_fh, dev->vmdq_rx_q); - } - - vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") destroy_device: Start put mbuf in mempool " - "back to ring for TX queue: %d, dev:(%"PRIu64")\n", - dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES), - dev->device_fh); - - mbuf_destroy_zcp(vpool); - } - -} - -/* - * A new device is added to a data core. First the device is added to the main linked list - * and the allocated to a specific data core. - */ -static int -new_device (struct virtio_net *dev) -{ - struct virtio_net_data_ll *ll_dev; - int lcore, core_add = 0; - uint32_t device_num_min = num_devices; - - /* Add device to main ll */ - ll_dev = get_data_ll_free_entry(&ll_root_free); - if (ll_dev == NULL) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit " - "of %d devices per core has been reached\n", - dev->device_fh, num_devices); - return -1; - } - ll_dev->dev = dev; - add_data_ll_entry(&ll_root_used, ll_dev); - ll_dev->dev->vmdq_rx_q - = ll_dev->dev->device_fh * (num_queues / num_devices); - - if (zero_copy) { - uint32_t index = ll_dev->dev->vmdq_rx_q; - uint32_t count_in_ring, i; - struct mbuf_table *tx_q; - - count_in_ring = rte_ring_count(vpool_array[index].ring); - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in new_device: mbuf count in mempool " - "before attach is: %d\n", - dev->device_fh, - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") in new_device: mbuf count in ring " - "before attach is : %d\n", - dev->device_fh, count_in_ring); - - /* - * Attach all mbufs in vpool.ring and put back intovpool.pool. - */ - for (i = 0; i < count_in_ring; i++) - attach_rxmbuf_zcp(dev); - - LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in " - "mempool after attach is: %d\n", - dev->device_fh, - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in " - "ring after attach is : %d\n", - dev->device_fh, - rte_ring_count(vpool_array[index].ring)); - - tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q]; - tx_q->txq_id = dev->vmdq_rx_q; - - if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) { - struct vpool *vpool = &vpool_array[dev->vmdq_rx_q]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to start " - "tx queue:%d\n", - dev->device_fh, dev->vmdq_rx_q); - - mbuf_destroy_zcp(vpool); - return -1; - } - - if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) { - struct vpool *vpool = &vpool_array[dev->vmdq_rx_q]; - - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to start " - "rx queue:%d\n", - dev->device_fh, dev->vmdq_rx_q); - - /* Stop the TX queue. */ - if (rte_eth_dev_tx_queue_stop(ports[0], - dev->vmdq_rx_q) != 0) { - LOG_DEBUG(VHOST_CONFIG, - "(%"PRIu64") In new_device: Failed to " - "stop tx queue:%d\n", - dev->device_fh, dev->vmdq_rx_q); - } - - mbuf_destroy_zcp(vpool); - return -1; - } - - } - - /*reset ready flag*/ - dev->ready = DEVICE_MAC_LEARNING; - dev->remove = 0; - - /* Find a suitable lcore to add the device. */ - RTE_LCORE_FOREACH_SLAVE(lcore) { - if (lcore_info[lcore].lcore_ll->device_num < device_num_min) { - device_num_min = lcore_info[lcore].lcore_ll->device_num; - core_add = lcore; - } - } - /* Add device to lcore ll */ - ll_dev->dev->coreid = core_add; - ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free); - if (ll_dev == NULL) { - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh); - dev->ready = DEVICE_SAFE_REMOVE; - destroy_device(dev); - return -1; - } - ll_dev->dev = dev; - add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev); - - /* Initialize device stats */ - memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics)); - - /* Disable notifications. */ - set_irq_status(dev); - lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++; - dev->flags |= VIRTIO_DEV_RUNNING; - - RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid); - - return 0; -} - -/* - * These callback allow devices to be added to the data core when configuration - * has been fully complete. - */ -static const struct virtio_net_device_ops virtio_net_device_ops = -{ - .new_device = new_device, - .destroy_device = destroy_device, -}; - -/* - * This is a thread will wake up after a period to print stats if the user has - * enabled them. - */ -static void -print_stats(void) -{ - struct virtio_net_data_ll *dev_ll; - uint64_t tx_dropped, rx_dropped; - uint64_t tx, tx_total, rx, rx_total; - uint32_t device_fh; - const char clr[] = { 27, '[', '2', 'J', '\0' }; - const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' }; - - while(1) { - sleep(enable_stats); - - /* Clear screen and move to top left */ - printf("%s%s", clr, top_left); - - printf("\nDevice statistics ===================================="); - - dev_ll = ll_root_used; - while (dev_ll != NULL) { - device_fh = (uint32_t)dev_ll->dev->device_fh; - tx_total = dev_statistics[device_fh].tx_total; - tx = dev_statistics[device_fh].tx; - tx_dropped = tx_total - tx; - if (zero_copy == 0) { - rx_total = rte_atomic64_read( - &dev_statistics[device_fh].rx_total_atomic); - rx = rte_atomic64_read( - &dev_statistics[device_fh].rx_atomic); - } else { - rx_total = dev_statistics[device_fh].rx_total; - rx = dev_statistics[device_fh].rx; - } - rx_dropped = rx_total - rx; - - printf("\nStatistics for device %"PRIu32" ------------------------------" - "\nTX total: %"PRIu64"" - "\nTX dropped: %"PRIu64"" - "\nTX successful: %"PRIu64"" - "\nRX total: %"PRIu64"" - "\nRX dropped: %"PRIu64"" - "\nRX successful: %"PRIu64"", - device_fh, - tx_total, - tx_dropped, - tx, - rx_total, - rx_dropped, - rx); - - dev_ll = dev_ll->next; - } - printf("\n======================================================\n"); - } -} - -static void -setup_mempool_tbl(int socket, uint32_t index, char *pool_name, - char *ring_name, uint32_t nb_mbuf) -{ - uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM; - vpool_array[index].pool - = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP, - MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private), - rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize, - rte_pktmbuf_init, NULL, socket, 0); - if (vpool_array[index].pool != NULL) { - vpool_array[index].ring - = rte_ring_create(ring_name, - rte_align32pow2(nb_mbuf + 1), - socket, RING_F_SP_ENQ | RING_F_SC_DEQ); - if (likely(vpool_array[index].ring != NULL)) { - LOG_DEBUG(VHOST_CONFIG, - "in setup_mempool_tbl: mbuf count in " - "mempool is: %d\n", - rte_mempool_count(vpool_array[index].pool)); - LOG_DEBUG(VHOST_CONFIG, - "in setup_mempool_tbl: mbuf count in " - "ring is: %d\n", - rte_ring_count(vpool_array[index].ring)); - } else { - rte_exit(EXIT_FAILURE, "ring_create(%s) failed", - ring_name); - } - - /* Need consider head room. */ - vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM; - } else { - rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name); - } -} - - -/* - * Main function, does initialisation and calls the per-lcore functions. The CUSE - * device is also registered here to handle the IOCTLs. - */ -int -MAIN(int argc, char *argv[]) -{ - struct rte_mempool *mbuf_pool = NULL; - unsigned lcore_id, core_id = 0; - unsigned nb_ports, valid_num_ports; - int ret; - uint8_t portid, queue_id = 0; - static pthread_t tid; - - /* init EAL */ - ret = rte_eal_init(argc, argv); - if (ret < 0) - rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); - argc -= ret; - argv += ret; - - /* parse app arguments */ - ret = us_vhost_parse_args(argc, argv); - if (ret < 0) - rte_exit(EXIT_FAILURE, "Invalid argument\n"); - - for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++) - if (rte_lcore_is_enabled(lcore_id)) - lcore_ids[core_id ++] = lcore_id; - - if (rte_lcore_count() > RTE_MAX_LCORE) - rte_exit(EXIT_FAILURE,"Not enough cores\n"); - - /*set the number of swithcing cores available*/ - num_switching_cores = rte_lcore_count()-1; - - /* Get the number of physical ports. */ - nb_ports = rte_eth_dev_count(); - if (nb_ports > RTE_MAX_ETHPORTS) - nb_ports = RTE_MAX_ETHPORTS; - - /* - * Update the global var NUM_PORTS and global array PORTS - * and get value of var VALID_NUM_PORTS according to system ports number - */ - valid_num_ports = check_ports_num(nb_ports); - - if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) { - RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u," - "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS); - return -1; - } - - if (zero_copy == 0) { - /* Create the mbuf pool. */ - mbuf_pool = rte_mempool_create( - "MBUF_POOL", - NUM_MBUFS_PER_PORT - * valid_num_ports, - MBUF_SIZE, MBUF_CACHE_SIZE, - sizeof(struct rte_pktmbuf_pool_private), - rte_pktmbuf_pool_init, NULL, - rte_pktmbuf_init, NULL, - rte_socket_id(), 0); - if (mbuf_pool == NULL) - rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); - - for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++) - vpool_array[queue_id].pool = mbuf_pool; - - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Enable VT loop back to let L2 switch to do it. */ - vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1; - LOG_DEBUG(VHOST_CONFIG, - "Enable loop back for L2 switch in vmdq.\n"); - } - } else { - uint32_t nb_mbuf; - char pool_name[RTE_MEMPOOL_NAMESIZE]; - char ring_name[RTE_MEMPOOL_NAMESIZE]; - - /* - * Zero copy defers queue RX/TX start to the time when guest - * finishes its startup and packet buffers from that guest are - * available. - */ - rx_conf_default.rx_deferred_start = (uint8_t)zero_copy; - rx_conf_default.rx_drop_en = 0; - tx_conf_default.tx_deferred_start = (uint8_t)zero_copy; - nb_mbuf = num_rx_descriptor - + num_switching_cores * MBUF_CACHE_SIZE_ZCP - + num_switching_cores * MAX_PKT_BURST; - - for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) { - snprintf(pool_name, sizeof(pool_name), - "rxmbuf_pool_%u", queue_id); - snprintf(ring_name, sizeof(ring_name), - "rxmbuf_ring_%u", queue_id); - setup_mempool_tbl(rte_socket_id(), queue_id, - pool_name, ring_name, nb_mbuf); - } - - nb_mbuf = num_tx_descriptor - + num_switching_cores * MBUF_CACHE_SIZE_ZCP - + num_switching_cores * MAX_PKT_BURST; - - for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) { - snprintf(pool_name, sizeof(pool_name), - "txmbuf_pool_%u", queue_id); - snprintf(ring_name, sizeof(ring_name), - "txmbuf_ring_%u", queue_id); - setup_mempool_tbl(rte_socket_id(), - (queue_id + MAX_QUEUES), - pool_name, ring_name, nb_mbuf); - } - - if (vm2vm_mode == VM2VM_HARDWARE) { - /* Enable VT loop back to let L2 switch to do it. */ - vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1; - LOG_DEBUG(VHOST_CONFIG, - "Enable loop back for L2 switch in vmdq.\n"); - } - } - /* Set log level. */ - rte_set_log_level(LOG_LEVEL); - - /* initialize all ports */ - for (portid = 0; portid < nb_ports; portid++) { - /* skip ports that are not enabled */ - if ((enabled_port_mask & (1 << portid)) == 0) { - RTE_LOG(INFO, VHOST_PORT, - "Skipping disabled port %d\n", portid); - continue; - } - if (port_init(portid) != 0) - rte_exit(EXIT_FAILURE, - "Cannot initialize network ports\n"); - } - - /* Initialise all linked lists. */ - if (init_data_ll() == -1) - rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n"); - - /* Initialize device stats */ - memset(&dev_statistics, 0, sizeof(dev_statistics)); - - /* Enable stats if the user option is set. */ - if (enable_stats) - pthread_create(&tid, NULL, (void*)print_stats, NULL ); - - /* Launch all data cores. */ - if (zero_copy == 0) { - RTE_LCORE_FOREACH_SLAVE(lcore_id) { - rte_eal_remote_launch(switch_worker, - mbuf_pool, lcore_id); - } - } else { - uint32_t count_in_mempool, index, i; - for (index = 0; index < 2*MAX_QUEUES; index++) { - /* For all RX and TX queues. */ - count_in_mempool - = rte_mempool_count(vpool_array[index].pool); - - /* - * Transfer all un-attached mbufs from vpool.pool - * to vpoo.ring. - */ - for (i = 0; i < count_in_mempool; i++) { - struct rte_mbuf *mbuf - = __rte_mbuf_raw_alloc( - vpool_array[index].pool); - rte_ring_sp_enqueue(vpool_array[index].ring, - (void *)mbuf); - } - - LOG_DEBUG(VHOST_CONFIG, - "in MAIN: mbuf count in mempool at initial " - "is: %d\n", count_in_mempool); - LOG_DEBUG(VHOST_CONFIG, - "in MAIN: mbuf count in ring at initial is :" - " %d\n", - rte_ring_count(vpool_array[index].ring)); - } - - RTE_LCORE_FOREACH_SLAVE(lcore_id) - rte_eal_remote_launch(switch_worker_zcp, NULL, - lcore_id); - } - - /* Register CUSE device to handle IOCTLs. */ - ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks()); - if (ret != 0) - rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n"); - - init_virtio_net(&virtio_net_device_ops); - - /* Start CUSE session. */ - start_cuse_session_loop(); - return 0; - -} - -- 2.20.1