X-Git-Url: http://git.droids-corp.org/?p=aversive.git;a=blobdiff_plain;f=modules%2Fbase%2Fcallout%2Ftest%2Fuart_config.h;fp=modules%2Fbase%2Fcallout%2Ftest%2Fuart_config.h;h=e55c352b18ac057bdfb03abc57baf7cc1d30380f;hp=0000000000000000000000000000000000000000;hb=9d7a205a0868595dc57f365eda4721b700e447b9;hpb=4dc5fba2e8aba8e89445fb532f9969a57e24b99c

diff --git a/modules/base/callout/test/uart_config.h b/modules/base/callout/test/uart_config.h
new file mode 100644
index 0000000..e55c352
--- /dev/null
+++ b/modules/base/callout/test/uart_config.h
@@ -0,0 +1,72 @@
+/*  
+ *  Copyright Droids Corporation, Microb Technology, Eirbot (2005)
+ * 
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Revision : $Id: uart_config.h,v 1.3.10.1 2006-11-26 21:06:02 zer0 Exp $
+ *
+ */
+
+/* Droids-corp 2004 - Zer0
+ * config for uart module
+ */
+
+#ifndef UART_CONFIG_H
+#define UART_CONFIG_H
+
+/*
+ * UART0 definitions 
+ */
+
+/* compile uart0 fonctions, undefine it to pass compilation */
+#define UART0_COMPILE  
+
+/* enable uart0 if == 1, disable if == 0 */
+#define UART0_ENABLED  1
+
+/* enable uart0 interrupts if == 1, disable if == 0 */
+#define UART0_INTERRUPT_ENABLED  1
+
+#define UART0_BAUDRATE 38400
+
+/* 
+ * if you enable this, the maximum baudrate you can reach is 
+ * higher, but the precision is lower. 
+ */
+#define UART0_USE_DOUBLE_SPEED 0
+//#define UART0_USE_DOUBLE_SPEED 1
+
+#define UART0_RX_FIFO_SIZE 4
+#define UART0_TX_FIFO_SIZE 4
+//#define UART0_NBITS 5
+//#define UART0_NBITS 6
+//#define UART0_NBITS 7
+#define UART0_NBITS 8
+//#define UART0_NBITS 9
+
+#define UART0_PARITY UART_PARTITY_NONE
+//#define UART0_PARITY UART_PARTITY_ODD
+//#define UART0_PARITY UART_PARTITY_EVEN
+
+#define UART0_STOP_BIT UART_STOP_BITS_1
+//#define UART0_STOP_BIT UART_STOP_BITS_2
+
+
+
+
+/* .... same for uart 1, 2, 3 ... */
+
+#endif
+