X-Git-Url: http://git.droids-corp.org/?p=aversive.git;a=blobdiff_plain;f=projects%2Fmicrob2010%2Fbootloader%2Fuart_config.h;fp=projects%2Fmicrob2010%2Fbootloader%2Fuart_config.h;h=506806b23e1e0dfda2bba66bb5bbbd9899bdfe0c;hp=0000000000000000000000000000000000000000;hb=5918edd6f4f713ef3c8b0b0020dd30a4fb8222ae;hpb=9d2d9100592e18fed985730298215884127fc568

diff --git a/projects/microb2010/bootloader/uart_config.h b/projects/microb2010/bootloader/uart_config.h
new file mode 100755
index 0000000..506806b
--- /dev/null
+++ b/projects/microb2010/bootloader/uart_config.h
@@ -0,0 +1,120 @@
+/*  
+ *  Copyright Droids Corporation, Microb Technology, Eirbot (2005)
+ * 
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:06 zer0 Exp $
+ *
+ */
+
+/* Droids-corp 2004 - Zer0
+ * config for uart module
+ */
+
+#ifndef UART_CONFIG_H
+#define UART_CONFIG_H
+
+#if UART_NUM == 0
+
+/* compile uart0 fonctions, undefine it to pass compilation */
+#define UART0_COMPILE  
+
+/* enable uart0 if == 1, disable if == 0 */
+#define UART0_ENABLED  1
+
+/* enable uart0 interrupts if == 1, disable if == 0 */
+#define UART0_INTERRUPT_ENABLED  1
+
+#define UART0_BAUDRATE 57600
+
+#define UART0_USE_DOUBLE_SPEED 0
+
+#define UART0_RX_FIFO_SIZE 64
+#define UART0_TX_FIFO_SIZE 16
+
+#define UART0_NBITS 8
+#define UART0_PARITY UART_PARTITY_NONE
+#define UART0_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 1
+
+/* compile uart1 fonctions, undefine it to pass compilation */
+#define UART1_COMPILE  
+
+/* enable uart1 if == 1, disable if == 0 */
+#define UART1_ENABLED  1
+
+/* enable uart1 interrupts if == 1, disable if == 0 */
+#define UART1_INTERRUPT_ENABLED  1
+
+#define UART1_BAUDRATE 57600
+
+#define UART1_USE_DOUBLE_SPEED 0
+
+#define UART1_RX_FIFO_SIZE 32
+#define UART1_TX_FIFO_SIZE 4
+
+#define UART1_NBITS 8
+#define UART1_PARITY UART_PARTITY_NONE
+#define UART1_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 2
+
+/* compile uart2 fonctions, undefine it to pass compilation */
+#define UART2_COMPILE  
+
+/* enable uart2 if == 1, disable if == 0 */
+#define UART2_ENABLED  1
+
+/* enable uart2 interrupts if == 1, disable if == 0 */
+#define UART2_INTERRUPT_ENABLED  1
+
+#define UART2_BAUDRATE 57600
+
+#define UART2_USE_DOUBLE_SPEED 0
+
+#define UART2_RX_FIFO_SIZE 32
+#define UART2_TX_FIFO_SIZE 4
+
+#define UART2_NBITS 8
+#define UART2_PARITY UART_PARTITY_NONE
+#define UART2_STOP_BIT UART_STOP_BITS_1
+
+#elif UART_NUM == 3
+
+/* compile uart3 fonctions, undefine it to pass compilation */
+#define UART3_COMPILE  
+
+/* enable uart3 if == 1, disable if == 0 */
+#define UART3_ENABLED  1
+
+/* enable uart3 interrupts if == 1, disable if == 0 */
+#define UART3_INTERRUPT_ENABLED  1
+
+#define UART3_BAUDRATE 57600
+
+#define UART3_USE_DOUBLE_SPEED 0
+
+#define UART3_RX_FIFO_SIZE 32
+#define UART3_TX_FIFO_SIZE 4
+
+#define UART3_NBITS 8
+#define UART3_PARITY UART_PARTITY_NONE
+#define UART3_STOP_BIT UART_STOP_BITS_1
+
+#endif /* uart num */
+
+#endif
+