X-Git-Url: http://git.droids-corp.org/?p=aversive.git;a=blobdiff_plain;f=projects%2Fmicrob2010%2Fsensorboard%2Fuart_config.h;fp=projects%2Fmicrob2010%2Fsensorboard%2Fuart_config.h;h=0000000000000000000000000000000000000000;hp=2a27e07b58fbfa310facbfc4aa63b29db3de05aa;hb=8d6a47e9e21a9a31f4bc12d32fb3d11091a4b305;hpb=821f753c0f88aff895d9feae59c442a6c446f96b

diff --git a/projects/microb2010/sensorboard/uart_config.h b/projects/microb2010/sensorboard/uart_config.h
deleted file mode 100644
index 2a27e07..0000000
--- a/projects/microb2010/sensorboard/uart_config.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*  
- *  Copyright Droids Corporation, Microb Technology, Eirbot (2005)
- * 
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  Revision : $Id: uart_config.h,v 1.3 2009-05-27 20:04:07 zer0 Exp $
- *
- */
-
-/* Droids-corp 2004 - Zer0
- * config for uart module
- */
-
-#ifndef UART_CONFIG_H
-#define UART_CONFIG_H
-
-/*
- * UART1 definitions 
- */
-
-/* compile uart1 fonctions, undefine it to pass compilation */
-#define UART1_COMPILE  
-
-/* enable uart1 if == 1, disable if == 0 */
-#define UART1_ENABLED  1
-
-/* enable uart1 interrupts if == 1, disable if == 0 */
-#define UART1_INTERRUPT_ENABLED  1
-
-#define UART1_BAUDRATE 57600
-
-/* 
- * if you enable this, the maximum baudrate you can reach is 
- * higher, but the precision is lower. 
- */
-#define UART1_USE_DOUBLE_SPEED 1
-
-#define UART1_RX_FIFO_SIZE 64
-#define UART1_TX_FIFO_SIZE 64
-#define UART1_NBITS 8
-
-#define UART1_PARITY UART_PARTITY_NONE
-
-#define UART1_STOP_BIT UART_STOP_BITS_1
-
-
-/*
- * UART3 definitions 
- */
-
-/* compile uart3 fonctions, undefine it to pass compilation */
-#define UART3_COMPILE  
-
-/* enable uart3 if == 1, disable if == 0 */
-#define UART3_ENABLED  1
-
-/* enable uart3 interrupts if == 1, disable if == 0 */
-#define UART3_INTERRUPT_ENABLED  1
-
-#define UART3_BAUDRATE 57600
-
-/* 
- * if you enable this, the maximum baudrate you can reach is 
- * higher, but the precision is lower. 
- */
-#define UART3_USE_DOUBLE_SPEED 1
-//#define UART3_USE_DOUBLE_SPEED 1
-
-#define UART3_RX_FIFO_SIZE 64
-#define UART3_TX_FIFO_SIZE 64
-//#define UART3_NBITS 5
-//#define UART3_NBITS 6
-//#define UART3_NBITS 7
-#define UART3_NBITS 8
-//#define UART3_NBITS 9
-
-#define UART3_PARITY UART_PARTITY_NONE
-//#define UART3_PARITY UART_PARTITY_ODD
-//#define UART3_PARITY UART_PARTITY_EVEN
-
-#define UART3_STOP_BIT UART_STOP_BITS_1
-//#define UART3_STOP_BIT UART_STOP_BITS_2
-
-
-
-
-/* .... same for uart 1, 2, 3 ... */
-
-#endif
-