From: Olivier Matz Date: Mon, 3 Oct 2016 08:38:44 +0000 (+0200) Subject: mbuf: move packet type definitions in a new file X-Git-Tag: spdx-start~5685 X-Git-Url: http://git.droids-corp.org/?p=dpdk.git;a=commitdiff_plain;h=a3917f2218ffb6965294e35ceaab2090650ae061 mbuf: move packet type definitions in a new file The file rte_mbuf.h starts to be quite big, and next commits will introduce more functions related to packet types. Let's move them in a new file. Signed-off-by: Olivier Matz --- diff --git a/lib/librte_mbuf/Makefile b/lib/librte_mbuf/Makefile index 8d62b0d3fd..27e037cc1f 100644 --- a/lib/librte_mbuf/Makefile +++ b/lib/librte_mbuf/Makefile @@ -44,7 +44,7 @@ LIBABIVER := 2 SRCS-$(CONFIG_RTE_LIBRTE_MBUF) := rte_mbuf.c # install includes -SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h +SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h rte_mbuf_ptype.h # this lib needs eal DEPDIRS-$(CONFIG_RTE_LIBRTE_MBUF) += lib/librte_eal lib/librte_mempool diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h index dc8070b1e6..55bc389f6c 100644 --- a/lib/librte_mbuf/rte_mbuf.h +++ b/lib/librte_mbuf/rte_mbuf.h @@ -60,6 +60,7 @@ #include #include #include +#include #ifdef __cplusplus extern "C" { @@ -237,500 +238,6 @@ extern "C" { /* Use final bit of flags to indicate a control mbuf */ #define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */ -/* - * 32 bits are divided into several fields to mark packet types. Note that - * each field is indexical. - * - Bit 3:0 is for L2 types. - * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types. - * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types. - * - Bit 15:12 is for tunnel types. - * - Bit 19:16 is for inner L2 types. - * - Bit 23:20 is for inner L3 types. - * - Bit 27:24 is for inner L4 types. - * - Bit 31:28 is reserved. - * - * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, - * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP - * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits. - * - * Note that L3 types values are selected for checking IPV4/IPV6 header from - * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and - * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values. - * - * Note that the packet types of the same packet recognized by different - * hardware may be different, as different hardware may have different - * capability of packet type recognition. - * - * examples: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=0x29 - * | 'version'=6, 'next header'=0x3A - * | 'ICMPv6 header'> - * will be recognized on i40e hardware as packet type combination of, - * RTE_PTYPE_L2_ETHER | - * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN | - * RTE_PTYPE_TUNNEL_IP | - * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_INNER_L4_ICMP. - * - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x2F - * | 'GRE header' - * | 'version'=6, 'next header'=0x11 - * | 'UDP header'> - * will be recognized on i40e hardware as packet type combination of, - * RTE_PTYPE_L2_ETHER | - * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_TUNNEL_GRENAT | - * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_INNER_L4_UDP. - */ -#define RTE_PTYPE_UNKNOWN 0x00000000 -/** - * Ethernet packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=[0x0800|0x86DD]> - */ -#define RTE_PTYPE_L2_ETHER 0x00000001 -/** - * Ethernet packet type for time sync. - * - * Packet format: - * <'ether type'=0x88F7> - */ -#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002 -/** - * ARP (Address Resolution Protocol) packet type. - * - * Packet format: - * <'ether type'=0x0806> - */ -#define RTE_PTYPE_L2_ETHER_ARP 0x00000003 -/** - * LLDP (Link Layer Discovery Protocol) packet type. - * - * Packet format: - * <'ether type'=0x88CC> - */ -#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004 -/** - * NSH (Network Service Header) packet type. - * - * Packet format: - * <'ether type'=0x894F> - */ -#define RTE_PTYPE_L2_ETHER_NSH 0x00000005 -/** - * Mask of layer 2 packet types. - * It is used for outer packet for tunneling cases. - */ -#define RTE_PTYPE_L2_MASK 0x0000000f -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and does not contain any - * header option. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=5> - */ -#define RTE_PTYPE_L3_IPV4 0x00000010 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and contains header - * options. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[6-15], 'options'> - */ -#define RTE_PTYPE_L3_IPV4_EXT 0x00000030 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and does not contain any - * extension header. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x3B> - */ -#define RTE_PTYPE_L3_IPV6 0x00000040 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and may or maynot contain - * header options. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[5-15], <'options'>> - */ -#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and contains extension - * headers. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * 'extension headers'> - */ -#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and may or maynot contain - * extension headers. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * <'extension headers'>> - */ -#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0 -/** - * Mask of layer 3 packet types. - * It is used for outer packet for tunneling cases. - */ -#define RTE_PTYPE_L3_MASK 0x000000f0 -/** - * TCP (Transmission Control Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=6, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=6> - */ -#define RTE_PTYPE_L4_TCP 0x00000100 -/** - * UDP (User Datagram Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17> - */ -#define RTE_PTYPE_L4_UDP 0x00000200 -/** - * Fragmented IP (Internet Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * It refers to those packets of any IP types, which can be recognized as - * fragmented. A fragmented packet cannot be recognized as any other L4 types - * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, - * RTE_PTYPE_L4_NONFRAG). - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'MF'=1> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=44> - */ -#define RTE_PTYPE_L4_FRAG 0x00000300 -/** - * SCTP (Stream Control Transmission Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=132, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=132> - */ -#define RTE_PTYPE_L4_SCTP 0x00000400 -/** - * ICMP (Internet Control Message Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=1, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=1> - */ -#define RTE_PTYPE_L4_ICMP 0x00000500 -/** - * Non-fragmented IP (Internet Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * It refers to those packets of any IP types, while cannot be recognized as - * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, - * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP). - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'!=[6|17|44|132|1]> - */ -#define RTE_PTYPE_L4_NONFRAG 0x00000600 -/** - * Mask of layer 4 packet types. - * It is used for outer packet for tunneling cases. - */ -#define RTE_PTYPE_L4_MASK 0x00000f00 -/** - * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=[4|41]> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[4|41]> - */ -#define RTE_PTYPE_TUNNEL_IP 0x00001000 -/** - * GRE (Generic Routing Encapsulation) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=47> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=47> - */ -#define RTE_PTYPE_TUNNEL_GRE 0x00002000 -/** - * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17 - * | 'destination port'=4798> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17 - * | 'destination port'=4798> - */ -#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000 -/** - * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling - * packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=47 - * | 'protocol type'=0x6558> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=47 - * | 'protocol type'=0x6558'> - */ -#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000 -/** - * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17 - * | 'destination port'=6081> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17 - * | 'destination port'=6081> - */ -#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000 -/** - * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area - * Network) or GRE (Generic Routing Encapsulation) could be recognized as this - * packet type, if they can not be recognized independently as of hardware - * capability. - */ -#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000 -/** - * Mask of tunneling packet types. - */ -#define RTE_PTYPE_TUNNEL_MASK 0x0000f000 -/** - * Ethernet packet type. - * It is used for inner packet type only. - * - * Packet format (inner only): - * <'ether type'=[0x800|0x86DD]> - */ -#define RTE_PTYPE_INNER_L2_ETHER 0x00010000 -/** - * Ethernet packet type with VLAN (Virtual Local Area Network) tag. - * - * Packet format (inner only): - * <'ether type'=[0x800|0x86DD], vlan=[1-4095]> - */ -#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000 -/** - * Mask of inner layer 2 packet types. - */ -#define RTE_PTYPE_INNER_L2_MASK 0x000f0000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and does not contain any header option. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=5> - */ -#define RTE_PTYPE_INNER_L3_IPV4 0x00100000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and contains header options. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[6-15], 'options'> - */ -#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and does not contain any extension header. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x3B> - */ -#define RTE_PTYPE_INNER_L3_IPV6 0x00300000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and may or maynot contain header options. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[5-15], <'options'>> - */ -#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and contains extension headers. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * 'extension headers'> - */ -#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and may or maynot contain extension - * headers. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * <'extension headers'>> - */ -#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000 -/** - * Mask of inner layer 3 packet types. - */ -#define RTE_PTYPE_INNER_L3_MASK 0x00f00000 -/** - * TCP (Transmission Control Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=6, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=6> - */ -#define RTE_PTYPE_INNER_L4_TCP 0x01000000 -/** - * UDP (User Datagram Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17> - */ -#define RTE_PTYPE_INNER_L4_UDP 0x02000000 -/** - * Fragmented IP (Internet Protocol) packet type. - * It is used for inner packet only, and may or maynot have layer 4 packet. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'MF'=1> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=44> - */ -#define RTE_PTYPE_INNER_L4_FRAG 0x03000000 -/** - * SCTP (Stream Control Transmission Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=132, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=132> - */ -#define RTE_PTYPE_INNER_L4_SCTP 0x04000000 -/** - * ICMP (Internet Control Message Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=1, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=1> - */ -#define RTE_PTYPE_INNER_L4_ICMP 0x05000000 -/** - * Non-fragmented IP (Internet Protocol) packet type. - * It is used for inner packet only, and may or maynot have other unknown layer - * 4 packet types. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'!=[6|17|44|132|1]> - */ -#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000 -/** - * Mask of inner layer 4 packet types. - */ -#define RTE_PTYPE_INNER_L4_MASK 0x0f000000 - -/** - * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by - * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can - * determine if it is an IPV4 packet. - */ -#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4) - -/** - * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by - * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can - * determine if it is an IPV4 packet. - */ -#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6) - -/* Check if it is a tunneling packet */ -#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \ - RTE_PTYPE_INNER_L2_MASK | \ - RTE_PTYPE_INNER_L3_MASK | \ - RTE_PTYPE_INNER_L4_MASK)) - /** Alignment constraint of mbuf private area. */ #define RTE_MBUF_PRIV_ALIGN 8 diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h new file mode 100644 index 0000000000..65e9ced9e0 --- /dev/null +++ b/lib/librte_mbuf/rte_mbuf_ptype.h @@ -0,0 +1,552 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2016 Intel Corporation. + * Copyright 2014-2016 6WIND S.A. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _RTE_MBUF_PTYPE_H_ +#define _RTE_MBUF_PTYPE_H_ + +/** + * @file + * RTE Mbuf Packet Types + * + * This file contains declarations for features related to mbuf packet + * types. The packet type gives information about the data carried by the + * mbuf, and is stored in the mbuf in a 32 bits field. + * + * The 32 bits are divided into several fields to mark packet types. Note that + * each field is indexical. + * - Bit 3:0 is for L2 types. + * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types. + * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types. + * - Bit 15:12 is for tunnel types. + * - Bit 19:16 is for inner L2 types. + * - Bit 23:20 is for inner L3 types. + * - Bit 27:24 is for inner L4 types. + * - Bit 31:28 is reserved. + * + * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, + * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP + * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits. + * + * Note that L3 types values are selected for checking IPV4/IPV6 header from + * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and + * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values. + * + * Note that the packet types of the same packet recognized by different + * hardware may be different, as different hardware may have different + * capability of packet type recognition. + * + * examples: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=0x29 + * | 'version'=6, 'next header'=0x3A + * | 'ICMPv6 header'> + * will be recognized on i40e hardware as packet type combination of, + * RTE_PTYPE_L2_ETHER | + * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN | + * RTE_PTYPE_TUNNEL_IP | + * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_INNER_L4_ICMP. + * + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x2F + * | 'GRE header' + * | 'version'=6, 'next header'=0x11 + * | 'UDP header'> + * will be recognized on i40e hardware as packet type combination of, + * RTE_PTYPE_L2_ETHER | + * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_TUNNEL_GRENAT | + * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | + * RTE_PTYPE_INNER_L4_UDP. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * No packet type information. + */ +#define RTE_PTYPE_UNKNOWN 0x00000000 +/** + * Ethernet packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=[0x0800|0x86DD]> + */ +#define RTE_PTYPE_L2_ETHER 0x00000001 +/** + * Ethernet packet type for time sync. + * + * Packet format: + * <'ether type'=0x88F7> + */ +#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002 +/** + * ARP (Address Resolution Protocol) packet type. + * + * Packet format: + * <'ether type'=0x0806> + */ +#define RTE_PTYPE_L2_ETHER_ARP 0x00000003 +/** + * LLDP (Link Layer Discovery Protocol) packet type. + * + * Packet format: + * <'ether type'=0x88CC> + */ +#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004 +/** + * NSH (Network Service Header) packet type. + * + * Packet format: + * <'ether type'=0x894F> + */ +#define RTE_PTYPE_L2_ETHER_NSH 0x00000005 +/** + * Mask of layer 2 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L2_MASK 0x0000000f +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and does not contain any + * header option. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=5> + */ +#define RTE_PTYPE_L3_IPV4 0x00000010 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and contains header + * options. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[6-15], 'options'> + */ +#define RTE_PTYPE_L3_IPV4_EXT 0x00000030 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and does not contain any + * extension header. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x3B> + */ +#define RTE_PTYPE_L3_IPV6 0x00000040 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for outer packet for tunneling cases, and may or maynot contain + * header options. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[5-15], <'options'>> + */ +#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and contains extension + * headers. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * 'extension headers'> + */ +#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for outer packet for tunneling cases, and may or maynot contain + * extension headers. + * + * Packet format: + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * <'extension headers'>> + */ +#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0 +/** + * Mask of layer 3 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L3_MASK 0x000000f0 +/** + * TCP (Transmission Control Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=6, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=6> + */ +#define RTE_PTYPE_L4_TCP 0x00000100 +/** + * UDP (User Datagram Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17> + */ +#define RTE_PTYPE_L4_UDP 0x00000200 +/** + * Fragmented IP (Internet Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * It refers to those packets of any IP types, which can be recognized as + * fragmented. A fragmented packet cannot be recognized as any other L4 types + * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, + * RTE_PTYPE_L4_NONFRAG). + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'MF'=1> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=44> + */ +#define RTE_PTYPE_L4_FRAG 0x00000300 +/** + * SCTP (Stream Control Transmission Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=132, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=132> + */ +#define RTE_PTYPE_L4_SCTP 0x00000400 +/** + * ICMP (Internet Control Message Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=1, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=1> + */ +#define RTE_PTYPE_L4_ICMP 0x00000500 +/** + * Non-fragmented IP (Internet Protocol) packet type. + * It is used for outer packet for tunneling cases. + * + * It refers to those packets of any IP types, while cannot be recognized as + * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, + * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP). + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'!=[6|17|44|132|1]> + */ +#define RTE_PTYPE_L4_NONFRAG 0x00000600 +/** + * Mask of layer 4 packet types. + * It is used for outer packet for tunneling cases. + */ +#define RTE_PTYPE_L4_MASK 0x00000f00 +/** + * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=[4|41]> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[4|41]> + */ +#define RTE_PTYPE_TUNNEL_IP 0x00001000 +/** + * GRE (Generic Routing Encapsulation) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=47> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=47> + */ +#define RTE_PTYPE_TUNNEL_GRE 0x00002000 +/** + * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17 + * | 'destination port'=4798> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17 + * | 'destination port'=4798> + */ +#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000 +/** + * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling + * packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=47 + * | 'protocol type'=0x6558> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=47 + * | 'protocol type'=0x6558'> + */ +#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000 +/** + * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type. + * + * Packet format: + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17 + * | 'destination port'=6081> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17 + * | 'destination port'=6081> + */ +#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000 +/** + * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area + * Network) or GRE (Generic Routing Encapsulation) could be recognized as this + * packet type, if they can not be recognized independently as of hardware + * capability. + */ +#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000 +/** + * Mask of tunneling packet types. + */ +#define RTE_PTYPE_TUNNEL_MASK 0x0000f000 +/** + * Ethernet packet type. + * It is used for inner packet type only. + * + * Packet format (inner only): + * <'ether type'=[0x800|0x86DD]> + */ +#define RTE_PTYPE_INNER_L2_ETHER 0x00010000 +/** + * Ethernet packet type with VLAN (Virtual Local Area Network) tag. + * + * Packet format (inner only): + * <'ether type'=[0x800|0x86DD], vlan=[1-4095]> + */ +#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000 +/** + * Mask of inner layer 2 packet types. + */ +#define RTE_PTYPE_INNER_L2_MASK 0x000f0000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and does not contain any header option. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=5> + */ +#define RTE_PTYPE_INNER_L3_IPV4 0x00100000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and contains header options. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[6-15], 'options'> + */ +#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and does not contain any extension header. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=0x3B> + */ +#define RTE_PTYPE_INNER_L3_IPV6 0x00300000 +/** + * IP (Internet Protocol) version 4 packet type. + * It is used for inner packet only, and may or maynot contain header options. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'ihl'=[5-15], <'options'>> + */ +#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and contains extension headers. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * 'extension headers'> + */ +#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000 +/** + * IP (Internet Protocol) version 6 packet type. + * It is used for inner packet only, and may or maynot contain extension + * headers. + * + * Packet format (inner only): + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], + * <'extension headers'>> + */ +#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000 +/** + * Mask of inner layer 3 packet types. + */ +#define RTE_PTYPE_INNER_L3_MASK 0x00f00000 +/** + * TCP (Transmission Control Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=6, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=6> + */ +#define RTE_PTYPE_INNER_L4_TCP 0x01000000 +/** + * UDP (User Datagram Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=17, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=17> + */ +#define RTE_PTYPE_INNER_L4_UDP 0x02000000 +/** + * Fragmented IP (Internet Protocol) packet type. + * It is used for inner packet only, and may or maynot have layer 4 packet. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'MF'=1> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=44> + */ +#define RTE_PTYPE_INNER_L4_FRAG 0x03000000 +/** + * SCTP (Stream Control Transmission Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=132, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=132> + */ +#define RTE_PTYPE_INNER_L4_SCTP 0x04000000 +/** + * ICMP (Internet Control Message Protocol) packet type. + * It is used for inner packet only. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'=1, 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'=1> + */ +#define RTE_PTYPE_INNER_L4_ICMP 0x05000000 +/** + * Non-fragmented IP (Internet Protocol) packet type. + * It is used for inner packet only, and may or maynot have other unknown layer + * 4 packet types. + * + * Packet format (inner only): + * <'ether type'=0x0800 + * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> + * or, + * <'ether type'=0x86DD + * | 'version'=6, 'next header'!=[6|17|44|132|1]> + */ +#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000 +/** + * Mask of inner layer 4 packet types. + */ +#define RTE_PTYPE_INNER_L4_MASK 0x0f000000 + +/** + * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by + * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can + * determine if it is an IPV4 packet. + */ +#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4) + +/** + * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by + * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can + * determine if it is an IPV4 packet. + */ +#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6) + +/* Check if it is a tunneling packet */ +#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & \ + (RTE_PTYPE_TUNNEL_MASK | \ + RTE_PTYPE_INNER_L2_MASK | \ + RTE_PTYPE_INNER_L3_MASK | \ + RTE_PTYPE_INNER_L4_MASK)) + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_MBUF_PTYPE_H_ */