fat: use uart from aversive

[protos/imu.git] / uart_config.h

diff --git a/uart_config.h b/uart_config.h
index 4822653..3785e57 100644 (file)
--- a/uart_config.h
+++ b/uart_config.h
@@ -15,7 +15,7 @@
  *  along with this program; if not, write to the Free Software\r
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\r
  *\r
- *  Revision : $Id: uart_config.h,v 1.2.8.1 2006-11-26 21:06:06 zer0 Exp $\r
+ *  Revision : $Id: uart_config.h,v 1.5 2009-11-08 17:24:33 zer0 Exp $\r
  *\r
  */\r
 \r
@@ -40,32 +40,51 @@
 #define UART0_INTERRUPT_ENABLED  1\r
 \r
 #define UART0_BAUDRATE 57600\r
-//#define UART0_BAUDRATE 115200\r
 \r
 /*\r
  * if you enable this, the maximum baudrate you can reach is\r
  * higher, but the precision is lower.\r
  */\r
-//#define UART0_USE_DOUBLE_SPEED 0\r
 #define UART0_USE_DOUBLE_SPEED 1\r
 \r
-#define UART0_RX_FIFO_SIZE 4\r
-#define UART0_TX_FIFO_SIZE 4\r
-//#define UART0_NBITS 5\r
-//#define UART0_NBITS 6\r
-//#define UART0_NBITS 7\r
+#define UART0_RX_FIFO_SIZE 64\r
+#define UART0_TX_FIFO_SIZE 127\r
 #define UART0_NBITS 8\r
-//#define UART0_NBITS 9\r
 \r
 #define UART0_PARITY UART_PARTITY_NONE\r
-//#define UART0_PARITY UART_PARTITY_ODD\r
-//#define UART0_PARITY UART_PARTITY_EVEN\r
 \r
 #define UART0_STOP_BIT UART_STOP_BITS_1\r
-//#define UART0_STOP_BIT UART_STOP_BITS_2\r
 \r
+/* .... same for uart 1, 2, 3 ... */\r
+\r
+/*\r
+ * UART1 definitions\r
+ */\r
+\r
+/* compile uart1 fonctions, undefine it to pass compilation */\r
+#define UART1_COMPILE\r
+\r
+/* enable uart1 if == 1, disable if == 0 */\r
+#define UART1_ENABLED  1\r
+\r
+/* enable uart1 interrupts if == 1, disable if == 0 */\r
+#define UART1_INTERRUPT_ENABLED  1\r
+\r
+#define UART1_BAUDRATE 57600\r
+\r
+/*\r
+ * if you enable this, the maximum baudrate you can reach is\r
+ * higher, but the precision is lower.\r
+ */\r
+#define UART1_USE_DOUBLE_SPEED 1\r
+\r
+#define UART1_RX_FIFO_SIZE 64\r
+#define UART1_TX_FIFO_SIZE 127\r
+#define UART1_NBITS 8\r
 \r
+#define UART1_PARITY UART_PARTITY_NONE\r
 \r
+#define UART1_STOP_BIT UART_STOP_BITS_1\r
 \r
 /* .... same for uart 1, 2, 3 ... */\r
 \r