Generated by EAGLE CAM Processor 5.12.0

Photoplotter Info File: /home/zer0/eagle/xbee-elec/beacon-rx/beacon-rx.gpi

 Date              : 5/8/13 5:08 PM
 Plotfile          : /home/zer0/eagle/xbee-elec/beacon-rx/beacon-rx.GTL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Emulate Thermal   : no
 Emulate Annulus   : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0000inch               4
 D11      draw      0.0520inch               8
 D12      rectangle 0.0315inch x 0.0472inch     4
 D13      rectangle 0.0354inch x 0.0315inch     3
 D14      rectangle 0.0480inch x 0.0880inch     3
 D15      rectangle 0.1417inch x 0.0866inch     1
 D16      square    0.0740inch               1
 D17      round     0.0740inch               8
 D18      round     0.0554inch               2
 D19      rectangle 0.0394inch x 0.0433inch     2
 D20      rectangle 0.0472inch x 0.0315inch     4
 D21      rectangle 0.0709inch x 0.0630inch     2
 D22      rectangle 0.0630inch x 0.0354inch     2
 D23      rectangle 0.0630inch x 0.0512inch     1
 D24      rectangle 0.0472inch x 0.0551inch     4
 D25      round     0.0750inch               1
 D26      round     0.1050inch               4
 D27      round     0.0660inch               6
 D28      rectangle 0.0610inch x 0.0512inch     4
 D29      draw      0.0240inch              32
 D30      round     0.0472inch              16
 D31      draw      0.0236inch              55