--- /dev/null
+Generated by EAGLE CAM Processor 6.4.0
+
+Photoplotter Info File: /home/zer0/eagle/xbee-elec/fpv_debugboard/fpv_debugboard.gpi
+
+ Date : 7/12/13 6:25 PM
+ Plotfile : /home/zer0/eagle/xbee-elec/fpv_debugboard/fpv_debugboard.GTL
+ Apertures : generated:
+ Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw + : 0.00 %
+ Tolerance Draw - : 0.00 %
+ Tolerance Flash + : 0.00 %
+ Tolerance Flash - : 0.00 %
+ Rotate : no
+ Mirror : no
+ Optimize : yes
+ Auto fit : yes
+ OffsetX : 0inch
+ OffsetY : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.4
+ Coordinate Units : Inch
+ Data Mode : Absolute
+ Zero Suppression : None
+ End Of Block : *
+
+Apertures used:
+
+ Code Shape Size used
+
+ D10 draw 0.0100inch 3
+ D11 draw 0.0120inch 282
+ D12 rectangle 0.0118inch x 0.0315inch 16
+ D13 rectangle 0.0945inch x 0.0866inch 2
+ D14 rectangle 0.0512inch x 0.0335inch 2
+ D15 octagon 0.0740inch 31
+ D16 square 0.0740inch 1
+ D17 round 0.0740inch 5
+ D18 rectangle 0.0472inch x 0.0315inch 24
+ D19 rectangle 0.0315inch x 0.0472inch 10
+ D20 rectangle 0.0551inch x 0.0472inch 6
+ D21 rectangle 0.0137inch x 0.0550inch 28
+ D22 rectangle 0.0197inch x 0.0984inch 5
+ D23 rectangle 0.0787inch x 0.0984inch 4
+ D24 draw 0.0000inch 2
+ D25 rectangle 0.0472inch x 0.0551inch 4
+ D26 rectangle 0.0630inch x 0.0551inch 2
+ D27 round 0.0356inch 38
+