update debug board... but what ?

[protos/xbee-elec.git] / fpv_debugboard / fpv_debugboard.s#4

diff --git a/fpv_debugboard/fpv_debugboard.s#4 b/fpv_debugboard/fpv_debugboard.s#4
index d632c5e..6b227a5 100644 (file)
--- a/fpv_debugboard/fpv_debugboard.s#4
+++ b/fpv_debugboard/fpv_debugboard.s#4
@@ -4347,6 +4347,9 @@ Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-0011
 <part name="U$4" library="SparkFun" deviceset="5V" device=""/>
 <part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="GND10" library="supply1" deviceset="GND" device=""/>
+<part name="LED5" library="SparkFun" deviceset="LED" device="1206"/>
+<part name="R14" library="SparkFun" deviceset="RESISTOR" device="0805-RES" value="180"/>
+<part name="GND11" library="supply1" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
@@ -4423,6 +4426,9 @@ for VCCIO. So use a manual switch.</text>
 <instance part="U$4" gate="G$1" x="83.82" y="236.22"/>
 <instance part="P+2" gate="G$1" x="101.6" y="228.6"/>
 <instance part="GND10" gate="1" x="226.06" y="198.12"/>
+<instance part="LED5" gate="G$1" x="264.16" y="175.26"/>
+<instance part="R14" gate="G$1" x="264.16" y="160.02" rot="R90"/>
+<instance part="GND11" gate="1" x="264.16" y="149.86"/>
 </instances>
 <busses>
 </busses>
@@ -4532,6 +4538,7 @@ for VCCIO. So use a manual switch.</text>
 <pinref part="C2" gate="G$1" pin="2"/>
 <wire x1="172.72" y1="185.42" x2="172.72" y2="175.26" width="0.1524" layer="91"/>
 <junction x="172.72" y="175.26"/>
+<junction x="157.48" y="175.26"/>
 </segment>
 <segment>
 <pinref part="IC1" gate="G$1" pin="CTS"/>
@@ -4539,6 +4546,11 @@ for VCCIO. So use a manual switch.</text>
 <wire x1="226.06" y1="203.2" x2="226.06" y2="200.66" width="0.1524" layer="91"/>
 <pinref part="GND10" gate="1" pin="GND"/>
 </segment>
+<segment>
+<pinref part="R14" gate="G$1" pin="1"/>
+<pinref part="GND11" gate="1" pin="GND"/>
+<wire x1="264.16" y1="154.94" x2="264.16" y2="152.4" width="0.1524" layer="91"/>
+</segment>
 </net>
 <net name="PDI_CLK_RESET" class="0">
 <segment>
@@ -4891,6 +4903,10 @@ for VCCIO. So use a manual switch.</text>
 <wire x1="264.16" y1="182.88" x2="261.62" y2="182.88" width="0.1524" layer="91"/>
 <pinref part="U$3" gate="G$1" pin="5V"/>
 <wire x1="264.16" y1="185.42" x2="264.16" y2="187.96" width="0.1524" layer="91"/>
+<pinref part="LED5" gate="G$1" pin="A"/>
+<wire x1="264.16" y1="182.88" x2="264.16" y2="177.8" width="0.1524" layer="91"/>
+<junction x="264.16" y="182.88"/>
+<junction x="264.16" y="185.42"/>
 </segment>
 <segment>
 <pinref part="JP6" gate="G$1" pin="3"/>
@@ -4929,6 +4945,13 @@ for VCCIO. So use a manual switch.</text>
 <label x="177.8" y="198.12" size="1.778" layer="95"/>
 </segment>
 </net>
+<net name="N$18" class="0">
+<segment>
+<pinref part="LED5" gate="G$1" pin="C"/>
+<pinref part="R14" gate="G$1" pin="2"/>
+<wire x1="264.16" y1="170.18" x2="264.16" y2="165.1" width="0.1524" layer="91"/>
+</segment>
+</net>
 </nets>
 </sheet>
 </sheets>