app/test-flow-perf/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2020 Mellanox Technologies, Ltd
   3  *
   4  * This file contain the application main file
   5  * This application provides the user the ability to test the
   6  * insertion rate for specific rte_flow rule under stress state ~4M rule/
   7  *
   8  * Then it will also provide packet per second measurement after installing
   9  * all rules, the user may send traffic to test the PPS that match the rules
  10  * after all rules are installed, to check performance or functionality after
  11  * the stress.
  12  *
  13  * The flows insertion will go for all ports first, then it will print the
  14  * results, after that the application will go into forwarding packets mode
  15  * it will start receiving traffic if any and then forwarding it back and
  16  * gives packet per second measurement.
  17  */
  18
  19 #include <stdio.h>
  20 #include <stdlib.h>
  21 #include <string.h>
  22 #include <stdint.h>
  23 #include <inttypes.h>
  24 #include <stdarg.h>
  25 #include <errno.h>
  26 #include <getopt.h>
  27 #include <stdbool.h>
  28 #include <sys/time.h>
  29 #include <signal.h>
  30 #include <unistd.h>
  31
  32 #include <rte_malloc.h>
  33 #include <rte_mempool.h>
  34 #include <rte_mbuf.h>
  35 #include <rte_ethdev.h>
  36 #include <rte_flow.h>
  37 #include <rte_mtr.h>
  38
  39 #include "config.h"
  40 #include "flow_gen.h"
  41
  42 #define MAX_BATCHES_COUNT          100
  43 #define DEFAULT_RULES_COUNT    4000000
  44 #define DEFAULT_RULES_BATCH     100000
  45 #define DEFAULT_GROUP                0
  46
  47 struct rte_flow *flow;
  48 static uint8_t flow_group;
  49
  50 static uint64_t encap_data;
  51 static uint64_t decap_data;
  52
  53 static uint64_t flow_items[MAX_ITEMS_NUM];
  54 static uint64_t flow_actions[MAX_ACTIONS_NUM];
  55 static uint64_t flow_attrs[MAX_ATTRS_NUM];
  56 static uint8_t items_idx, actions_idx, attrs_idx;
  57
  58 static uint64_t ports_mask;
  59 static volatile bool force_quit;
  60 static bool dump_iterations;
  61 static bool delete_flag;
  62 static bool dump_socket_mem_flag;
  63 static bool enable_fwd;
  64
  65 static struct rte_mempool *mbuf_mp;
  66 static uint32_t nb_lcores;
  67 static uint32_t rules_count;
  68 static uint32_t rules_batch;
  69 static uint32_t hairpin_queues_num; /* total hairpin q number - default: 0 */
  70 static uint32_t nb_lcores;
  71
  72 #define MAX_PKT_BURST    32
  73 #define LCORE_MODE_PKT    1
  74 #define LCORE_MODE_STATS  2
  75 #define MAX_STREAMS      64
  76 #define METER_CREATE      1
  77 #define METER_DELETE      2
  78
  79 struct stream {
  80         int tx_port;
  81         int tx_queue;
  82         int rx_port;
  83         int rx_queue;
  84 };
  85
  86 struct lcore_info {
  87         int mode;
  88         int streams_nb;
  89         struct stream streams[MAX_STREAMS];
  90         /* stats */
  91         uint64_t tx_pkts;
  92         uint64_t tx_drops;
  93         uint64_t rx_pkts;
  94         struct rte_mbuf *pkts[MAX_PKT_BURST];
  95 } __rte_cache_aligned;
  96
  97 static struct lcore_info lcore_infos[RTE_MAX_LCORE];
  98
  99 struct used_cpu_time {
 100         double insertion[MAX_PORTS][RTE_MAX_LCORE];
 101         double deletion[MAX_PORTS][RTE_MAX_LCORE];
 102 };
 103
 104 struct multi_cores_pool {
 105         uint32_t cores_count;
 106         uint32_t rules_count;
 107         struct used_cpu_time create_meter;
 108         struct used_cpu_time create_flow;
 109         int64_t last_alloc[RTE_MAX_LCORE];
 110         int64_t current_alloc[RTE_MAX_LCORE];
 111 } __rte_cache_aligned;
 112
 113 static struct multi_cores_pool mc_pool = {
 114         .cores_count = 1,
 115 };
 116
 117 static void
 118 usage(char *progname)
 119 {
 120         printf("\nusage: %s\n", progname);
 121         printf("\nControl configurations:\n");
 122         printf("  --rules-count=N: to set the number of needed"
 123                 " rules to insert, default is %d\n", DEFAULT_RULES_COUNT);
 124         printf("  --rules-batch=N: set number of batched rules,"
 125                 " default is %d\n", DEFAULT_RULES_BATCH);
 126         printf("  --dump-iterations: To print rates for each"
 127                 " iteration\n");
 128         printf("  --deletion-rate: Enable deletion rate"
 129                 " calculations\n");
 130         printf("  --dump-socket-mem: To dump all socket memory\n");
 131         printf("  --enable-fwd: To enable packets forwarding"
 132                 " after insertion\n");
 133         printf("  --portmask=N: hexadecimal bitmask of ports used\n");
 134
 135         printf("To set flow attributes:\n");
 136         printf("  --ingress: set ingress attribute in flows\n");
 137         printf("  --egress: set egress attribute in flows\n");
 138         printf("  --transfer: set transfer attribute in flows\n");
 139         printf("  --group=N: set group for all flows,"
 140                 " default is %d\n", DEFAULT_GROUP);
 141         printf("  --cores=N: to set the number of needed "
 142                 "cores to insert rte_flow rules, default is 1\n");
 143
 144         printf("To set flow items:\n");
 145         printf("  --ether: add ether layer in flow items\n");
 146         printf("  --vlan: add vlan layer in flow items\n");
 147         printf("  --ipv4: add ipv4 layer in flow items\n");
 148         printf("  --ipv6: add ipv6 layer in flow items\n");
 149         printf("  --tcp: add tcp layer in flow items\n");
 150         printf("  --udp: add udp layer in flow items\n");
 151         printf("  --vxlan: add vxlan layer in flow items\n");
 152         printf("  --vxlan-gpe: add vxlan-gpe layer in flow items\n");
 153         printf("  --gre: add gre layer in flow items\n");
 154         printf("  --geneve: add geneve layer in flow items\n");
 155         printf("  --gtp: add gtp layer in flow items\n");
 156         printf("  --meta: add meta layer in flow items\n");
 157         printf("  --tag: add tag layer in flow items\n");
 158         printf("  --icmpv4: add icmpv4 layer in flow items\n");
 159         printf("  --icmpv6: add icmpv6 layer in flow items\n");
 160
 161         printf("To set flow actions:\n");
 162         printf("  --port-id: add port-id action in flow actions\n");
 163         printf("  --rss: add rss action in flow actions\n");
 164         printf("  --queue: add queue action in flow actions\n");
 165         printf("  --jump: add jump action in flow actions\n");
 166         printf("  --mark: add mark action in flow actions\n");
 167         printf("  --count: add count action in flow actions\n");
 168         printf("  --set-meta: add set meta action in flow actions\n");
 169         printf("  --set-tag: add set tag action in flow actions\n");
 170         printf("  --drop: add drop action in flow actions\n");
 171         printf("  --hairpin-queue=N: add hairpin-queue action in flow actions\n");
 172         printf("  --hairpin-rss=N: add hairpin-rss action in flow actions\n");
 173         printf("  --set-src-mac: add set src mac action to flow actions\n"
 174                 "Src mac to be set is random each flow\n");
 175         printf("  --set-dst-mac: add set dst mac action to flow actions\n"
 176                  "Dst mac to be set is random each flow\n");
 177         printf("  --set-src-ipv4: add set src ipv4 action to flow actions\n"
 178                 "Src ipv4 to be set is random each flow\n");
 179         printf("  --set-dst-ipv4 add set dst ipv4 action to flow actions\n"
 180                 "Dst ipv4 to be set is random each flow\n");
 181         printf("  --set-src-ipv6: add set src ipv6 action to flow actions\n"
 182                 "Src ipv6 to be set is random each flow\n");
 183         printf("  --set-dst-ipv6: add set dst ipv6 action to flow actions\n"
 184                 "Dst ipv6 to be set is random each flow\n");
 185         printf("  --set-src-tp: add set src tp action to flow actions\n"
 186                 "Src tp to be set is random each flow\n");
 187         printf("  --set-dst-tp: add set dst tp action to flow actions\n"
 188                 "Dst tp to be set is random each flow\n");
 189         printf("  --inc-tcp-ack: add inc tcp ack action to flow actions\n"
 190                 "tcp ack will be increments by 1\n");
 191         printf("  --dec-tcp-ack: add dec tcp ack action to flow actions\n"
 192                 "tcp ack will be decrements by 1\n");
 193         printf("  --inc-tcp-seq: add inc tcp seq action to flow actions\n"
 194                 "tcp seq will be increments by 1\n");
 195         printf("  --dec-tcp-seq: add dec tcp seq action to flow actions\n"
 196                 "tcp seq will be decrements by 1\n");
 197         printf("  --set-ttl: add set ttl action to flow actions\n"
 198                 "L3 ttl to be set is random each flow\n");
 199         printf("  --dec-ttl: add dec ttl action to flow actions\n"
 200                 "L3 ttl will be decrements by 1\n");
 201         printf("  --set-ipv4-dscp: add set ipv4 dscp action to flow actions\n"
 202                 "ipv4 dscp value to be set is random each flow\n");
 203         printf("  --set-ipv6-dscp: add set ipv6 dscp action to flow actions\n"
 204                 "ipv6 dscp value to be set is random each flow\n");
 205         printf("  --flag: add flag action to flow actions\n");
 206         printf("  --meter: add meter action to flow actions\n");
 207         printf("  --raw-encap=<data>: add raw encap action to flow actions\n"
 208                 "Data is the data needed to be encaped\n"
 209                 "Example: raw-encap=ether,ipv4,udp,vxlan\n");
 210         printf("  --raw-decap=<data>: add raw decap action to flow actions\n"
 211                 "Data is the data needed to be decaped\n"
 212                 "Example: raw-decap=ether,ipv4,udp,vxlan\n");
 213         printf("  --vxlan-encap: add vxlan-encap action to flow actions\n"
 214                 "Encapped data is fixed with pattern: ether,ipv4,udp,vxlan\n"
 215                 "With fixed values\n");
 216         printf("  --vxlan-decap: add vxlan_decap action to flow actions\n");
 217 }
 218
 219 static void
 220 args_parse(int argc, char **argv)
 221 {
 222         uint64_t pm;
 223         char **argvopt;
 224         char *token;
 225         char *end;
 226         int n, opt;
 227         int opt_idx;
 228         size_t i;
 229
 230         static const struct option_dict {
 231                 const char *str;
 232                 const uint64_t mask;
 233                 uint64_t *map;
 234                 uint8_t *map_idx;
 235
 236         } flow_options[] = {
 237                 {
 238                         .str = "ether",
 239                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH),
 240                         .map = &flow_items[0],
 241                         .map_idx = &items_idx
 242                 },
 243                 {
 244                         .str = "ipv4",
 245                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV4),
 246                         .map = &flow_items[0],
 247                         .map_idx = &items_idx
 248                 },
 249                 {
 250                         .str = "ipv6",
 251                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV6),
 252                         .map = &flow_items[0],
 253                         .map_idx = &items_idx
 254                 },
 255                 {
 256                         .str = "vlan",
 257                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VLAN),
 258                         .map = &flow_items[0],
 259                         .map_idx = &items_idx
 260                 },
 261                 {
 262                         .str = "tcp",
 263                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TCP),
 264                         .map = &flow_items[0],
 265                         .map_idx = &items_idx
 266                 },
 267                 {
 268                         .str = "udp",
 269                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_UDP),
 270                         .map = &flow_items[0],
 271                         .map_idx = &items_idx
 272                 },
 273                 {
 274                         .str = "vxlan",
 275                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN),
 276                         .map = &flow_items[0],
 277                         .map_idx = &items_idx
 278                 },
 279                 {
 280                         .str = "vxlan-gpe",
 281                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN_GPE),
 282                         .map = &flow_items[0],
 283                         .map_idx = &items_idx
 284                 },
 285                 {
 286                         .str = "gre",
 287                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GRE),
 288                         .map = &flow_items[0],
 289                         .map_idx = &items_idx
 290                 },
 291                 {
 292                         .str = "geneve",
 293                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GENEVE),
 294                         .map = &flow_items[0],
 295                         .map_idx = &items_idx
 296                 },
 297                 {
 298                         .str = "gtp",
 299                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GTP),
 300                         .map = &flow_items[0],
 301                         .map_idx = &items_idx
 302                 },
 303                 {
 304                         .str = "meta",
 305                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_META),
 306                         .map = &flow_items[0],
 307                         .map_idx = &items_idx
 308                 },
 309                 {
 310                         .str = "tag",
 311                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TAG),
 312                         .map = &flow_items[0],
 313                         .map_idx = &items_idx
 314                 },
 315                 {
 316                         .str = "icmpv4",
 317                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP),
 318                         .map = &flow_items[0],
 319                         .map_idx = &items_idx
 320                 },
 321                 {
 322                         .str = "icmpv6",
 323                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP6),
 324                         .map = &flow_items[0],
 325                         .map_idx = &items_idx
 326                 },
 327                 {
 328                         .str = "ingress",
 329                         .mask = INGRESS,
 330                         .map = &flow_attrs[0],
 331                         .map_idx = &attrs_idx
 332                 },
 333                 {
 334                         .str = "egress",
 335                         .mask = EGRESS,
 336                         .map = &flow_attrs[0],
 337                         .map_idx = &attrs_idx
 338                 },
 339                 {
 340                         .str = "transfer",
 341                         .mask = TRANSFER,
 342                         .map = &flow_attrs[0],
 343                         .map_idx = &attrs_idx
 344                 },
 345                 {
 346                         .str = "port-id",
 347                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_PORT_ID),
 348                         .map = &flow_actions[0],
 349                         .map_idx = &actions_idx
 350                 },
 351                 {
 352                         .str = "rss",
 353                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_RSS),
 354                         .map = &flow_actions[0],
 355                         .map_idx = &actions_idx
 356                 },
 357                 {
 358                         .str = "queue",
 359                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_QUEUE),
 360                         .map = &flow_actions[0],
 361                         .map_idx = &actions_idx
 362                 },
 363                 {
 364                         .str = "jump",
 365                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_JUMP),
 366                         .map = &flow_actions[0],
 367                         .map_idx = &actions_idx
 368                 },
 369                 {
 370                         .str = "mark",
 371                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_MARK),
 372                         .map = &flow_actions[0],
 373                         .map_idx = &actions_idx
 374                 },
 375                 {
 376                         .str = "count",
 377                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_COUNT),
 378                         .map = &flow_actions[0],
 379                         .map_idx = &actions_idx
 380                 },
 381                 {
 382                         .str = "set-meta",
 383                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_META),
 384                         .map = &flow_actions[0],
 385                         .map_idx = &actions_idx
 386                 },
 387                 {
 388                         .str = "set-tag",
 389                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_TAG),
 390                         .map = &flow_actions[0],
 391                         .map_idx = &actions_idx
 392                 },
 393                 {
 394                         .str = "drop",
 395                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_DROP),
 396                         .map = &flow_actions[0],
 397                         .map_idx = &actions_idx
 398                 },
 399                 {
 400                         .str = "set-src-mac",
 401                         .mask = FLOW_ACTION_MASK(
 402                                 RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
 403                         ),
 404                         .map = &flow_actions[0],
 405                         .map_idx = &actions_idx
 406                 },
 407                 {
 408                         .str = "set-dst-mac",
 409                         .mask = FLOW_ACTION_MASK(
 410                                 RTE_FLOW_ACTION_TYPE_SET_MAC_DST
 411                         ),
 412                         .map = &flow_actions[0],
 413                         .map_idx = &actions_idx
 414                 },
 415                 {
 416                         .str = "set-src-ipv4",
 417                         .mask = FLOW_ACTION_MASK(
 418                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
 419                         ),
 420                         .map = &flow_actions[0],
 421                         .map_idx = &actions_idx
 422                 },
 423                 {
 424                         .str = "set-dst-ipv4",
 425                         .mask = FLOW_ACTION_MASK(
 426                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
 427                         ),
 428                         .map = &flow_actions[0],
 429                         .map_idx = &actions_idx
 430                 },
 431                 {
 432                         .str = "set-src-ipv6",
 433                         .mask = FLOW_ACTION_MASK(
 434                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
 435                         ),
 436                         .map = &flow_actions[0],
 437                         .map_idx = &actions_idx
 438                 },
 439                 {
 440                         .str = "set-dst-ipv6",
 441                         .mask = FLOW_ACTION_MASK(
 442                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
 443                         ),
 444                         .map = &flow_actions[0],
 445                         .map_idx = &actions_idx
 446                 },
 447                 {
 448                         .str = "set-src-tp",
 449                         .mask = FLOW_ACTION_MASK(
 450                                 RTE_FLOW_ACTION_TYPE_SET_TP_SRC
 451                         ),
 452                         .map = &flow_actions[0],
 453                         .map_idx = &actions_idx
 454                 },
 455                 {
 456                         .str = "set-dst-tp",
 457                         .mask = FLOW_ACTION_MASK(
 458                                 RTE_FLOW_ACTION_TYPE_SET_TP_DST
 459                         ),
 460                         .map = &flow_actions[0],
 461                         .map_idx = &actions_idx
 462                 },
 463                 {
 464                         .str = "inc-tcp-ack",
 465                         .mask = FLOW_ACTION_MASK(
 466                                 RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
 467                         ),
 468                         .map = &flow_actions[0],
 469                         .map_idx = &actions_idx
 470                 },
 471                 {
 472                         .str = "dec-tcp-ack",
 473                         .mask = FLOW_ACTION_MASK(
 474                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
 475                         ),
 476                         .map = &flow_actions[0],
 477                         .map_idx = &actions_idx
 478                 },
 479                 {
 480                         .str = "inc-tcp-seq",
 481                         .mask = FLOW_ACTION_MASK(
 482                                 RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
 483                         ),
 484                         .map = &flow_actions[0],
 485                         .map_idx = &actions_idx
 486                 },
 487                 {
 488                         .str = "dec-tcp-seq",
 489                         .mask = FLOW_ACTION_MASK(
 490                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
 491                         ),
 492                         .map = &flow_actions[0],
 493                         .map_idx = &actions_idx
 494                 },
 495                 {
 496                         .str = "set-ttl",
 497                         .mask = FLOW_ACTION_MASK(
 498                                 RTE_FLOW_ACTION_TYPE_SET_TTL
 499                         ),
 500                         .map = &flow_actions[0],
 501                         .map_idx = &actions_idx
 502                 },
 503                 {
 504                         .str = "dec-ttl",
 505                         .mask = FLOW_ACTION_MASK(
 506                                 RTE_FLOW_ACTION_TYPE_DEC_TTL
 507                         ),
 508                         .map = &flow_actions[0],
 509                         .map_idx = &actions_idx
 510                 },
 511                 {
 512                         .str = "set-ipv4-dscp",
 513                         .mask = FLOW_ACTION_MASK(
 514                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
 515                         ),
 516                         .map = &flow_actions[0],
 517                         .map_idx = &actions_idx
 518                 },
 519                 {
 520                         .str = "set-ipv6-dscp",
 521                         .mask = FLOW_ACTION_MASK(
 522                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
 523                         ),
 524                         .map = &flow_actions[0],
 525                         .map_idx = &actions_idx
 526                 },
 527                 {
 528                         .str = "flag",
 529                         .mask = FLOW_ACTION_MASK(
 530                                 RTE_FLOW_ACTION_TYPE_FLAG
 531                         ),
 532                         .map = &flow_actions[0],
 533                         .map_idx = &actions_idx
 534                 },
 535                 {
 536                         .str = "meter",
 537                         .mask = FLOW_ACTION_MASK(
 538                                 RTE_FLOW_ACTION_TYPE_METER
 539                         ),
 540                         .map = &flow_actions[0],
 541                         .map_idx = &actions_idx
 542                 },
 543                 {
 544                         .str = "vxlan-encap",
 545                         .mask = FLOW_ACTION_MASK(
 546                                 RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
 547                         ),
 548                         .map = &flow_actions[0],
 549                         .map_idx = &actions_idx
 550                 },
 551                 {
 552                         .str = "vxlan-decap",
 553                         .mask = FLOW_ACTION_MASK(
 554                                 RTE_FLOW_ACTION_TYPE_VXLAN_DECAP
 555                         ),
 556                         .map = &flow_actions[0],
 557                         .map_idx = &actions_idx
 558                 },
 559         };
 560
 561         static const struct option lgopts[] = {
 562                 /* Control */
 563                 { "help",                       0, 0, 0 },
 564                 { "rules-count",                1, 0, 0 },
 565                 { "rules-batch",                1, 0, 0 },
 566                 { "dump-iterations",            0, 0, 0 },
 567                 { "deletion-rate",              0, 0, 0 },
 568                 { "dump-socket-mem",            0, 0, 0 },
 569                 { "enable-fwd",                 0, 0, 0 },
 570                 { "portmask",                   1, 0, 0 },
 571                 { "cores",                      1, 0, 0 },
 572                 /* Attributes */
 573                 { "ingress",                    0, 0, 0 },
 574                 { "egress",                     0, 0, 0 },
 575                 { "transfer",                   0, 0, 0 },
 576                 { "group",                      1, 0, 0 },
 577                 /* Items */
 578                 { "ether",                      0, 0, 0 },
 579                 { "vlan",                       0, 0, 0 },
 580                 { "ipv4",                       0, 0, 0 },
 581                 { "ipv6",                       0, 0, 0 },
 582                 { "tcp",                        0, 0, 0 },
 583                 { "udp",                        0, 0, 0 },
 584                 { "vxlan",                      0, 0, 0 },
 585                 { "vxlan-gpe",                  0, 0, 0 },
 586                 { "gre",                        0, 0, 0 },
 587                 { "geneve",                     0, 0, 0 },
 588                 { "gtp",                        0, 0, 0 },
 589                 { "meta",                       0, 0, 0 },
 590                 { "tag",                        0, 0, 0 },
 591                 { "icmpv4",                     0, 0, 0 },
 592                 { "icmpv6",                     0, 0, 0 },
 593                 /* Actions */
 594                 { "port-id",                    0, 0, 0 },
 595                 { "rss",                        0, 0, 0 },
 596                 { "queue",                      0, 0, 0 },
 597                 { "jump",                       0, 0, 0 },
 598                 { "mark",                       0, 0, 0 },
 599                 { "count",                      0, 0, 0 },
 600                 { "set-meta",                   0, 0, 0 },
 601                 { "set-tag",                    0, 0, 0 },
 602                 { "drop",                       0, 0, 0 },
 603                 { "hairpin-queue",              1, 0, 0 },
 604                 { "hairpin-rss",                1, 0, 0 },
 605                 { "set-src-mac",                0, 0, 0 },
 606                 { "set-dst-mac",                0, 0, 0 },
 607                 { "set-src-ipv4",               0, 0, 0 },
 608                 { "set-dst-ipv4",               0, 0, 0 },
 609                 { "set-src-ipv6",               0, 0, 0 },
 610                 { "set-dst-ipv6",               0, 0, 0 },
 611                 { "set-src-tp",                 0, 0, 0 },
 612                 { "set-dst-tp",                 0, 0, 0 },
 613                 { "inc-tcp-ack",                0, 0, 0 },
 614                 { "dec-tcp-ack",                0, 0, 0 },
 615                 { "inc-tcp-seq",                0, 0, 0 },
 616                 { "dec-tcp-seq",                0, 0, 0 },
 617                 { "set-ttl",                    0, 0, 0 },
 618                 { "dec-ttl",                    0, 0, 0 },
 619                 { "set-ipv4-dscp",              0, 0, 0 },
 620                 { "set-ipv6-dscp",              0, 0, 0 },
 621                 { "flag",                       0, 0, 0 },
 622                 { "meter",                      0, 0, 0 },
 623                 { "raw-encap",                  1, 0, 0 },
 624                 { "raw-decap",                  1, 0, 0 },
 625                 { "vxlan-encap",                0, 0, 0 },
 626                 { "vxlan-decap",                0, 0, 0 },
 627         };
 628
 629         RTE_ETH_FOREACH_DEV(i)
 630                 ports_mask |= 1 << i;
 631
 632         hairpin_queues_num = 0;
 633         argvopt = argv;
 634
 635         printf(":: Flow -> ");
 636         while ((opt = getopt_long(argc, argvopt, "",
 637                                 lgopts, &opt_idx)) != EOF) {
 638                 switch (opt) {
 639                 case 0:
 640                         if (strcmp(lgopts[opt_idx].name, "help") == 0) {
 641                                 usage(argv[0]);
 642                                 exit(EXIT_SUCCESS);
 643                         }
 644
 645                         if (strcmp(lgopts[opt_idx].name, "group") == 0) {
 646                                 n = atoi(optarg);
 647                                 if (n >= 0)
 648                                         flow_group = n;
 649                                 else
 650                                         rte_exit(EXIT_FAILURE,
 651                                                 "flow group should be >= 0\n");
 652                                 printf("group %d / ", flow_group);
 653                         }
 654
 655                         for (i = 0; i < RTE_DIM(flow_options); i++)
 656                                 if (strcmp(lgopts[opt_idx].name,
 657                                                 flow_options[i].str) == 0) {
 658                                         flow_options[i].map[
 659                                         (*flow_options[i].map_idx)++] =
 660                                                 flow_options[i].mask;
 661                                         printf("%s / ", flow_options[i].str);
 662                                 }
 663
 664                         if (strcmp(lgopts[opt_idx].name,
 665                                         "hairpin-rss") == 0) {
 666                                 n = atoi(optarg);
 667                                 if (n > 0)
 668                                         hairpin_queues_num = n;
 669                                 else
 670                                         rte_exit(EXIT_FAILURE,
 671                                                 "Hairpin queues should be > 0\n");
 672
 673                                 flow_actions[actions_idx++] =
 674                                         HAIRPIN_RSS_ACTION;
 675                                 printf("hairpin-rss / ");
 676                         }
 677                         if (strcmp(lgopts[opt_idx].name,
 678                                         "hairpin-queue") == 0) {
 679                                 n = atoi(optarg);
 680                                 if (n > 0)
 681                                         hairpin_queues_num = n;
 682                                 else
 683                                         rte_exit(EXIT_FAILURE,
 684                                                 "Hairpin queues should be > 0\n");
 685
 686                                 flow_actions[actions_idx++] =
 687                                         HAIRPIN_QUEUE_ACTION;
 688                                 printf("hairpin-queue / ");
 689                         }
 690
 691                         if (strcmp(lgopts[opt_idx].name, "raw-encap") == 0) {
 692                                 printf("raw-encap ");
 693                                 flow_actions[actions_idx++] =
 694                                         FLOW_ITEM_MASK(
 695                                                 RTE_FLOW_ACTION_TYPE_RAW_ENCAP
 696                                         );
 697
 698                                 token = strtok(optarg, ",");
 699                                 while (token != NULL) {
 700                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 701                                                 if (strcmp(flow_options[i].str, token) == 0) {
 702                                                         printf("%s,", token);
 703                                                         encap_data |= flow_options[i].mask;
 704                                                         break;
 705                                                 }
 706                                                 /* Reached last item with no match */
 707                                                 if (i == (RTE_DIM(flow_options) - 1))
 708                                                         rte_exit(EXIT_FAILURE,
 709                                                                 "Invalid encap item: %s\n", token);
 710                                         }
 711                                         token = strtok(NULL, ",");
 712                                 }
 713                                 printf(" / ");
 714                         }
 715                         if (strcmp(lgopts[opt_idx].name, "raw-decap") == 0) {
 716                                 printf("raw-decap ");
 717                                 flow_actions[actions_idx++] =
 718                                         FLOW_ITEM_MASK(
 719                                                 RTE_FLOW_ACTION_TYPE_RAW_DECAP
 720                                         );
 721
 722                                 token = strtok(optarg, ",");
 723                                 while (token != NULL) {
 724                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 725                                                 if (strcmp(flow_options[i].str, token) == 0) {
 726                                                         printf("%s,", token);
 727                                                         encap_data |= flow_options[i].mask;
 728                                                         break;
 729                                                 }
 730                                                 /* Reached last item with no match */
 731                                                 if (i == (RTE_DIM(flow_options) - 1))
 732                                                         rte_exit(EXIT_FAILURE,
 733                                                                 "Invalid decap item %s\n", token);
 734                                         }
 735                                         token = strtok(NULL, ",");
 736                                 }
 737                                 printf(" / ");
 738                         }
 739                         /* Control */
 740                         if (strcmp(lgopts[opt_idx].name,
 741                                         "rules-batch") == 0) {
 742                                 n = atoi(optarg);
 743                                 if (n >= DEFAULT_RULES_BATCH)
 744                                         rules_batch = n;
 745                                 else {
 746                                         rte_exit(EXIT_FAILURE,
 747                                                 "rules_batch should be >= %d\n",
 748                                                 DEFAULT_RULES_BATCH);
 749                                 }
 750                         }
 751                         if (strcmp(lgopts[opt_idx].name,
 752                                         "rules-count") == 0) {
 753                                 n = atoi(optarg);
 754                                 if (n >= (int) rules_batch)
 755                                         rules_count = n;
 756                                 else {
 757                                         rte_exit(EXIT_FAILURE,
 758                                                 "rules_count should be >= %d\n",
 759                                                 rules_batch);
 760                                 }
 761                         }
 762                         if (strcmp(lgopts[opt_idx].name,
 763                                         "dump-iterations") == 0)
 764                                 dump_iterations = true;
 765                         if (strcmp(lgopts[opt_idx].name,
 766                                         "deletion-rate") == 0)
 767                                 delete_flag = true;
 768                         if (strcmp(lgopts[opt_idx].name,
 769                                         "dump-socket-mem") == 0)
 770                                 dump_socket_mem_flag = true;
 771                         if (strcmp(lgopts[opt_idx].name,
 772                                         "enable-fwd") == 0)
 773                                 enable_fwd = true;
 774                         if (strcmp(lgopts[opt_idx].name,
 775                                         "portmask") == 0) {
 776                                 /* parse hexadecimal string */
 777                                 end = NULL;
 778                                 pm = strtoull(optarg, &end, 16);
 779                                 if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
 780                                         rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 781                                 ports_mask = pm;
 782                         }
 783                         if (strcmp(lgopts[opt_idx].name, "cores") == 0) {
 784                                 n = atoi(optarg);
 785                                 if ((int) rte_lcore_count() <= n) {
 786                                         rte_exit(EXIT_FAILURE,
 787                                                 "Error: you need %d cores to run on multi-cores\n"
 788                                                 "Existing cores are: %d\n", n, rte_lcore_count());
 789                                 }
 790                                 if (n <= RTE_MAX_LCORE && n > 0)
 791                                         mc_pool.cores_count = n;
 792                                 else {
 793                                         rte_exit(EXIT_FAILURE,
 794                                                 "Error: cores count must be > 0 and < %d\n",
 795                                                 RTE_MAX_LCORE);
 796                                 }
 797                         }
 798                         break;
 799                 default:
 800                         usage(argv[0]);
 801                         rte_exit(EXIT_FAILURE, "Invalid option: %s\n",
 802                                         argv[optind]);
 803                         break;
 804                 }
 805         }
 806         printf("end_flow\n");
 807 }
 808
 809 /* Dump the socket memory statistics on console */
 810 static size_t
 811 dump_socket_mem(FILE *f)
 812 {
 813         struct rte_malloc_socket_stats socket_stats;
 814         unsigned int i = 0;
 815         size_t total = 0;
 816         size_t alloc = 0;
 817         size_t free = 0;
 818         unsigned int n_alloc = 0;
 819         unsigned int n_free = 0;
 820         bool active_nodes = false;
 821
 822
 823         for (i = 0; i < RTE_MAX_NUMA_NODES; i++) {
 824                 if (rte_malloc_get_socket_stats(i, &socket_stats) ||
 825                     !socket_stats.heap_totalsz_bytes)
 826                         continue;
 827                 active_nodes = true;
 828                 total += socket_stats.heap_totalsz_bytes;
 829                 alloc += socket_stats.heap_allocsz_bytes;
 830                 free += socket_stats.heap_freesz_bytes;
 831                 n_alloc += socket_stats.alloc_count;
 832                 n_free += socket_stats.free_count;
 833                 if (dump_socket_mem_flag) {
 834                         fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 835                         fprintf(f,
 836                                 "\nSocket %u:\nsize(M) total: %.6lf\nalloc:"
 837                                 " %.6lf(%.3lf%%)\nfree: %.6lf"
 838                                 "\nmax: %.6lf"
 839                                 "\ncount alloc: %u\nfree: %u\n",
 840                                 i,
 841                                 socket_stats.heap_totalsz_bytes / 1.0e6,
 842                                 socket_stats.heap_allocsz_bytes / 1.0e6,
 843                                 (double)socket_stats.heap_allocsz_bytes * 100 /
 844                                 (double)socket_stats.heap_totalsz_bytes,
 845                                 socket_stats.heap_freesz_bytes / 1.0e6,
 846                                 socket_stats.greatest_free_size / 1.0e6,
 847                                 socket_stats.alloc_count,
 848                                 socket_stats.free_count);
 849                                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 850                 }
 851         }
 852         if (dump_socket_mem_flag && active_nodes) {
 853                 fprintf(f,
 854                         "\nTotal: size(M)\ntotal: %.6lf"
 855                         "\nalloc: %.6lf(%.3lf%%)\nfree: %.6lf"
 856                         "\ncount alloc: %u\nfree: %u\n",
 857                         total / 1.0e6, alloc / 1.0e6,
 858                         (double)alloc * 100 / (double)total, free / 1.0e6,
 859                         n_alloc, n_free);
 860                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::\n");
 861         }
 862         return alloc;
 863 }
 864
 865 static void
 866 print_flow_error(struct rte_flow_error error)
 867 {
 868         printf("Flow can't be created %d message: %s\n",
 869                 error.type,
 870                 error.message ? error.message : "(no stated reason)");
 871 }
 872
 873 static inline void
 874 print_rules_batches(double *cpu_time_per_batch)
 875 {
 876         uint8_t idx;
 877         double delta;
 878         double rate;
 879
 880         for (idx = 0; idx < MAX_BATCHES_COUNT; idx++) {
 881                 if (!cpu_time_per_batch[idx])
 882                         break;
 883                 delta = (double)(rules_batch / cpu_time_per_batch[idx]);
 884                 rate = delta / 1000; /* Save rate in K unit. */
 885                 printf(":: Rules batch #%d: %d rules "
 886                         "in %f sec[ Rate = %f K Rule/Sec ]\n",
 887                         idx, rules_batch,
 888                         cpu_time_per_batch[idx], rate);
 889         }
 890 }
 891
 892
 893 static inline int
 894 has_meter(void)
 895 {
 896         int i;
 897
 898         for (i = 0; i < MAX_ACTIONS_NUM; i++) {
 899                 if (flow_actions[i] == 0)
 900                         break;
 901                 if (flow_actions[i]
 902                                 & FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_METER))
 903                         return 1;
 904         }
 905         return 0;
 906 }
 907
 908 static void
 909 create_meter_rule(int port_id, uint32_t counter)
 910 {
 911         int ret;
 912         struct rte_mtr_params params;
 913         uint32_t default_prof_id = 100;
 914         struct rte_mtr_error error;
 915
 916         memset(&params, 0, sizeof(struct rte_mtr_params));
 917         params.meter_enable = 1;
 918         params.stats_mask = 0xffff;
 919         params.use_prev_mtr_color = 0;
 920         params.dscp_table = NULL;
 921
 922         /*create meter*/
 923         params.meter_profile_id = default_prof_id;
 924         params.action[RTE_COLOR_GREEN] =
 925                 MTR_POLICER_ACTION_COLOR_GREEN;
 926         params.action[RTE_COLOR_YELLOW] =
 927                 MTR_POLICER_ACTION_COLOR_YELLOW;
 928         params.action[RTE_COLOR_RED] =
 929                 MTR_POLICER_ACTION_DROP;
 930
 931         ret = rte_mtr_create(port_id, counter, &params, 1, &error);
 932         if (ret != 0) {
 933                 printf("Port %u create meter idx(%d) error(%d) message: %s\n",
 934                         port_id, counter, error.type,
 935                         error.message ? error.message : "(no stated reason)");
 936                 rte_exit(EXIT_FAILURE, "Error in creating meter\n");
 937         }
 938 }
 939
 940 static void
 941 destroy_meter_rule(int port_id, uint32_t counter)
 942 {
 943         struct rte_mtr_error error;
 944
 945         if (rte_mtr_destroy(port_id, counter, &error)) {
 946                 printf("Port %u destroy meter(%d) error(%d) message: %s\n",
 947                         port_id, counter, error.type,
 948                         error.message ? error.message : "(no stated reason)");
 949                 rte_exit(EXIT_FAILURE, "Error in deleting meter rule\n");
 950         }
 951 }
 952
 953 static void
 954 meters_handler(int port_id, uint8_t core_id, uint8_t ops)
 955 {
 956         uint64_t start_batch;
 957         double cpu_time_used, insertion_rate;
 958         int rules_count_per_core, rules_batch_idx;
 959         uint32_t counter, start_counter = 0, end_counter;
 960         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
 961
 962         rules_count_per_core = rules_count / mc_pool.cores_count;
 963
 964         if (core_id)
 965                 start_counter = core_id * rules_count_per_core;
 966         end_counter = (core_id + 1) * rules_count_per_core;
 967
 968         cpu_time_used = 0;
 969         start_batch = rte_get_timer_cycles();
 970         for (counter = start_counter; counter < end_counter; counter++) {
 971                 if (ops == METER_CREATE)
 972                         create_meter_rule(port_id, counter);
 973                 else
 974                         destroy_meter_rule(port_id, counter);
 975                 /*
 976                  * Save the insertion rate for rules batch.
 977                  * Check if the insertion reached the rules
 978                  * patch counter, then save the insertion rate
 979                  * for this batch.
 980                  */
 981                 if (!((counter + 1) % rules_batch)) {
 982                         rules_batch_idx = ((counter + 1) / rules_batch) - 1;
 983                         cpu_time_per_batch[rules_batch_idx] =
 984                                 ((double)(rte_get_timer_cycles() - start_batch))
 985                                 / rte_get_timer_hz();
 986                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
 987                         start_batch = rte_get_timer_cycles();
 988                 }
 989         }
 990
 991         /* Print insertion rates for all batches */
 992         if (dump_iterations)
 993                 print_rules_batches(cpu_time_per_batch);
 994
 995         insertion_rate =
 996                 ((double) (rules_count_per_core / cpu_time_used) / 1000);
 997
 998         /* Insertion rate for all rules in one core */
 999         printf(":: Port %d :: Core %d Meter %s :: start @[%d] - end @[%d],"
1000                 " use:%.02fs, rate:%.02fk Rule/Sec\n",
1001                 port_id, core_id, ops == METER_CREATE ? "create" : "delete",
1002                 start_counter, end_counter - 1,
1003                 cpu_time_used, insertion_rate);
1004
1005         if (ops == METER_CREATE)
1006                 mc_pool.create_meter.insertion[port_id][core_id]
1007                         = cpu_time_used;
1008         else
1009                 mc_pool.create_meter.deletion[port_id][core_id]
1010                         = cpu_time_used;
1011 }
1012
1013 static void
1014 destroy_meter_profile(void)
1015 {
1016         struct rte_mtr_error error;
1017         uint16_t nr_ports;
1018         int port_id;
1019
1020         nr_ports = rte_eth_dev_count_avail();
1021         for (port_id = 0; port_id < nr_ports; port_id++) {
1022                 /* If port outside portmask */
1023                 if (!((ports_mask >> port_id) & 0x1))
1024                         continue;
1025
1026                 if (rte_mtr_meter_profile_delete
1027                         (port_id, DEFAULT_METER_PROF_ID, &error)) {
1028                         printf("Port %u del profile error(%d) message: %s\n",
1029                                 port_id, error.type,
1030                                 error.message ? error.message : "(no stated reason)");
1031                         rte_exit(EXIT_FAILURE, "Error: Destroy meter profile Failed!\n");
1032                 }
1033         }
1034 }
1035
1036 static void
1037 create_meter_profile(void)
1038 {
1039         uint16_t nr_ports;
1040         int ret, port_id;
1041         struct rte_mtr_meter_profile mp;
1042         struct rte_mtr_error error;
1043
1044         /*
1045          *currently , only create one meter file for one port
1046          *1 meter profile -> N meter rules -> N rte flows
1047          */
1048         memset(&mp, 0, sizeof(struct rte_mtr_meter_profile));
1049         nr_ports = rte_eth_dev_count_avail();
1050         for (port_id = 0; port_id < nr_ports; port_id++) {
1051                 /* If port outside portmask */
1052                 if (!((ports_mask >> port_id) & 0x1))
1053                         continue;
1054
1055                 mp.alg = RTE_MTR_SRTCM_RFC2697;
1056                 mp.srtcm_rfc2697.cir = METER_CIR;
1057                 mp.srtcm_rfc2697.cbs = METER_CIR / 8;
1058                 mp.srtcm_rfc2697.ebs = 0;
1059
1060                 ret = rte_mtr_meter_profile_add
1061                         (port_id, DEFAULT_METER_PROF_ID, &mp, &error);
1062                 if (ret != 0) {
1063                         printf("Port %u create Profile error(%d) message: %s\n",
1064                                 port_id, error.type,
1065                                 error.message ? error.message : "(no stated reason)");
1066                         rte_exit(EXIT_FAILURE, "Error: Creation meter profile Failed!\n");
1067                 }
1068         }
1069 }
1070
1071 static inline void
1072 destroy_flows(int port_id, uint8_t core_id, struct rte_flow **flows_list)
1073 {
1074         struct rte_flow_error error;
1075         clock_t start_batch, end_batch;
1076         double cpu_time_used = 0;
1077         double deletion_rate;
1078         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
1079         double delta;
1080         uint32_t i;
1081         int rules_batch_idx;
1082         int rules_count_per_core;
1083
1084         rules_count_per_core = rules_count / mc_pool.cores_count;
1085         /* If group > 0 , should add 1 flow which created in group 0 */
1086         if (flow_group > 0 && core_id == 0)
1087                 rules_count_per_core++;
1088
1089         start_batch = rte_get_timer_cycles();
1090         for (i = 0; i < (uint32_t) rules_count_per_core; i++) {
1091                 if (flows_list[i] == 0)
1092                         break;
1093
1094                 memset(&error, 0x33, sizeof(error));
1095                 if (rte_flow_destroy(port_id, flows_list[i], &error)) {
1096                         print_flow_error(error);
1097                         rte_exit(EXIT_FAILURE, "Error in deleting flow\n");
1098                 }
1099
1100                 /*
1101                  * Save the deletion rate for rules batch.
1102                  * Check if the deletion reached the rules
1103                  * patch counter, then save the deletion rate
1104                  * for this batch.
1105                  */
1106                 if (!((i + 1) % rules_batch)) {
1107                         end_batch = rte_get_timer_cycles();
1108                         delta = (double) (end_batch - start_batch);
1109                         rules_batch_idx = ((i + 1) / rules_batch) - 1;
1110                         cpu_time_per_batch[rules_batch_idx] = delta / rte_get_timer_hz();
1111                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
1112                         start_batch = rte_get_timer_cycles();
1113                 }
1114         }
1115
1116         /* Print deletion rates for all batches */
1117         if (dump_iterations)
1118                 print_rules_batches(cpu_time_per_batch);
1119
1120         /* Deletion rate for all rules */
1121         deletion_rate = ((double) (rules_count_per_core / cpu_time_used) / 1000);
1122         printf(":: Port %d :: Core %d :: Rules deletion rate -> %f K Rule/Sec\n",
1123                 port_id, core_id, deletion_rate);
1124         printf(":: Port %d :: Core %d :: The time for deleting %d rules is %f seconds\n",
1125                 port_id, core_id, rules_count_per_core, cpu_time_used);
1126
1127         mc_pool.create_flow.deletion[port_id][core_id] = cpu_time_used;
1128 }
1129
1130 static struct rte_flow **
1131 insert_flows(int port_id, uint8_t core_id)
1132 {
1133         struct rte_flow **flows_list;
1134         struct rte_flow_error error;
1135         clock_t start_batch, end_batch;
1136         double cpu_time_used;
1137         double insertion_rate;
1138         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
1139         double delta;
1140         uint32_t flow_index;
1141         uint32_t counter, start_counter = 0, end_counter;
1142         uint64_t global_items[MAX_ITEMS_NUM] = { 0 };
1143         uint64_t global_actions[MAX_ACTIONS_NUM] = { 0 };
1144         int rules_batch_idx;
1145         int rules_count_per_core;
1146
1147         rules_count_per_core = rules_count / mc_pool.cores_count;
1148
1149         /* Set boundaries of rules for each core. */
1150         if (core_id)
1151                 start_counter = core_id * rules_count_per_core;
1152         end_counter = (core_id + 1) * rules_count_per_core;
1153
1154         global_items[0] = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH);
1155         global_actions[0] = FLOW_ITEM_MASK(RTE_FLOW_ACTION_TYPE_JUMP);
1156
1157         flows_list = rte_zmalloc("flows_list",
1158                 (sizeof(struct rte_flow *) * rules_count_per_core) + 1, 0);
1159         if (flows_list == NULL)
1160                 rte_exit(EXIT_FAILURE, "No Memory available!\n");
1161
1162         cpu_time_used = 0;
1163         flow_index = 0;
1164         if (flow_group > 0 && core_id == 0) {
1165                 /*
1166                  * Create global rule to jump into flow_group,
1167                  * this way the app will avoid the default rules.
1168                  *
1169                  * This rule will be created only once.
1170                  *
1171                  * Global rule:
1172                  * group 0 eth / end actions jump group <flow_group>
1173                  */
1174                 flow = generate_flow(port_id, 0, flow_attrs,
1175                         global_items, global_actions,
1176                         flow_group, 0, 0, 0, 0, core_id, &error);
1177
1178                 if (flow == NULL) {
1179                         print_flow_error(error);
1180                         rte_exit(EXIT_FAILURE, "Error in creating flow\n");
1181                 }
1182                 flows_list[flow_index++] = flow;
1183         }
1184
1185         start_batch = rte_get_timer_cycles();
1186         for (counter = start_counter; counter < end_counter; counter++) {
1187                 flow = generate_flow(port_id, flow_group,
1188                         flow_attrs, flow_items, flow_actions,
1189                         JUMP_ACTION_TABLE, counter,
1190                         hairpin_queues_num,
1191                         encap_data, decap_data,
1192                         core_id, &error);
1193
1194                 if (force_quit)
1195                         counter = end_counter;
1196
1197                 if (!flow) {
1198                         print_flow_error(error);
1199                         rte_exit(EXIT_FAILURE, "Error in creating flow\n");
1200                 }
1201
1202                 flows_list[flow_index++] = flow;
1203
1204                 /*
1205                  * Save the insertion rate for rules batch.
1206                  * Check if the insertion reached the rules
1207                  * patch counter, then save the insertion rate
1208                  * for this batch.
1209                  */
1210                 if (!((counter + 1) % rules_batch)) {
1211                         end_batch = rte_get_timer_cycles();
1212                         delta = (double) (end_batch - start_batch);
1213                         rules_batch_idx = ((counter + 1) / rules_batch) - 1;
1214                         cpu_time_per_batch[rules_batch_idx] = delta / rte_get_timer_hz();
1215                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
1216                         start_batch = rte_get_timer_cycles();
1217                 }
1218         }
1219
1220         /* Print insertion rates for all batches */
1221         if (dump_iterations)
1222                 print_rules_batches(cpu_time_per_batch);
1223
1224         printf(":: Port %d :: Core %d boundaries :: start @[%d] - end @[%d]\n",
1225                 port_id, core_id, start_counter, end_counter - 1);
1226
1227         /* Insertion rate for all rules in one core */
1228         insertion_rate = ((double) (rules_count_per_core / cpu_time_used) / 1000);
1229         printf(":: Port %d :: Core %d :: Rules insertion rate -> %f K Rule/Sec\n",
1230                 port_id, core_id, insertion_rate);
1231         printf(":: Port %d :: Core %d :: The time for creating %d in rules %f seconds\n",
1232                 port_id, core_id, rules_count_per_core, cpu_time_used);
1233
1234         mc_pool.create_flow.insertion[port_id][core_id] = cpu_time_used;
1235         return flows_list;
1236 }
1237
1238 static void
1239 flows_handler(uint8_t core_id)
1240 {
1241         struct rte_flow **flows_list;
1242         uint16_t nr_ports;
1243         int port_id;
1244
1245         nr_ports = rte_eth_dev_count_avail();
1246
1247         if (rules_batch > rules_count)
1248                 rules_batch = rules_count;
1249
1250         printf(":: Rules Count per port: %d\n\n", rules_count);
1251
1252         for (port_id = 0; port_id < nr_ports; port_id++) {
1253                 /* If port outside portmask */
1254                 if (!((ports_mask >> port_id) & 0x1))
1255                         continue;
1256
1257                 /* Insertion part. */
1258                 mc_pool.last_alloc[core_id] = (int64_t)dump_socket_mem(stdout);
1259                 if (has_meter())
1260                         meters_handler(port_id, core_id, METER_CREATE);
1261                 flows_list = insert_flows(port_id, core_id);
1262                 if (flows_list == NULL)
1263                         rte_exit(EXIT_FAILURE, "Error: Insertion Failed!\n");
1264                 mc_pool.current_alloc[core_id] = (int64_t)dump_socket_mem(stdout);
1265
1266                 /* Deletion part. */
1267                 if (delete_flag) {
1268                         destroy_flows(port_id, core_id, flows_list);
1269                         if (has_meter())
1270                                 meters_handler(port_id, core_id, METER_DELETE);
1271                 }
1272         }
1273 }
1274
1275 static void
1276 dump_used_cpu_time(const char *item,
1277                 uint16_t port, struct used_cpu_time *used_time)
1278 {
1279         uint32_t i;
1280         /* Latency: total count of rte rules divided
1281          * over max time used by thread between all
1282          * threads time.
1283          *
1284          * Throughput: total count of rte rules divided
1285          * over the average of the time cosumed by all
1286          * threads time.
1287          */
1288         double insertion_latency_time;
1289         double insertion_throughput_time;
1290         double deletion_latency_time;
1291         double deletion_throughput_time;
1292         double insertion_latency, insertion_throughput;
1293         double deletion_latency, deletion_throughput;
1294
1295         /* Save first insertion/deletion rates from first thread.
1296          * Start comparing with all threads, if any thread used
1297          * time more than current saved, replace it.
1298          *
1299          * Thus in the end we will have the max time used for
1300          * insertion/deletion by one thread.
1301          *
1302          * As for memory consumption, save the min of all threads
1303          * of last alloc, and save the max for all threads for
1304          * current alloc.
1305          */
1306
1307         insertion_latency_time = used_time->insertion[port][0];
1308         deletion_latency_time = used_time->deletion[port][0];
1309         insertion_throughput_time = used_time->insertion[port][0];
1310         deletion_throughput_time = used_time->deletion[port][0];
1311
1312         i = mc_pool.cores_count;
1313         while (i-- > 1) {
1314                 insertion_throughput_time += used_time->insertion[port][i];
1315                 deletion_throughput_time += used_time->deletion[port][i];
1316                 if (insertion_latency_time < used_time->insertion[port][i])
1317                         insertion_latency_time = used_time->insertion[port][i];
1318                 if (deletion_latency_time < used_time->deletion[port][i])
1319                         deletion_latency_time = used_time->deletion[port][i];
1320         }
1321
1322         insertion_latency = ((double) (mc_pool.rules_count
1323                                 / insertion_latency_time) / 1000);
1324         deletion_latency = ((double) (mc_pool.rules_count
1325                                 / deletion_latency_time) / 1000);
1326
1327         insertion_throughput_time /= mc_pool.cores_count;
1328         deletion_throughput_time /= mc_pool.cores_count;
1329         insertion_throughput = ((double) (mc_pool.rules_count
1330                                 / insertion_throughput_time) / 1000);
1331         deletion_throughput = ((double) (mc_pool.rules_count
1332                                 / deletion_throughput_time) / 1000);
1333
1334         /* Latency stats */
1335         printf("\n%s\n:: [Latency | Insertion] All Cores :: Port %d :: ",
1336                 item, port);
1337         printf("Total flows insertion rate -> %f K Rules/Sec\n",
1338                 insertion_latency);
1339         printf(":: [Latency | Insertion] All Cores :: Port %d :: ", port);
1340         printf("The time for creating %d rules is %f seconds\n",
1341                 mc_pool.rules_count, insertion_latency_time);
1342
1343         /* Throughput stats */
1344         printf(":: [Throughput | Insertion] All Cores :: Port %d :: ", port);
1345         printf("Total flows insertion rate -> %f K Rules/Sec\n",
1346                 insertion_throughput);
1347         printf(":: [Throughput | Insertion] All Cores :: Port %d :: ", port);
1348         printf("The average time for creating %d rules is %f seconds\n",
1349                 mc_pool.rules_count, insertion_throughput_time);
1350
1351         if (delete_flag) {
1352         /* Latency stats */
1353                 printf(":: [Latency | Deletion] All Cores :: Port %d :: Total "
1354                         "deletion rate -> %f K Rules/Sec\n",
1355                         port, deletion_latency);
1356                 printf(":: [Latency | Deletion] All Cores :: Port %d :: ",
1357                         port);
1358                 printf("The time for deleting %d rules is %f seconds\n",
1359                         mc_pool.rules_count, deletion_latency_time);
1360
1361                 /* Throughput stats */
1362                 printf(":: [Throughput | Deletion] All Cores :: Port %d :: Total "
1363                         "deletion rate -> %f K Rules/Sec\n",
1364                         port, deletion_throughput);
1365                 printf(":: [Throughput | Deletion] All Cores :: Port %d :: ",
1366                         port);
1367                 printf("The average time for deleting %d rules is %f seconds\n",
1368                         mc_pool.rules_count, deletion_throughput_time);
1369         }
1370 }
1371
1372 static void
1373 dump_used_mem(uint16_t port)
1374 {
1375         uint32_t i;
1376         int64_t last_alloc, current_alloc;
1377         int flow_size_in_bytes;
1378
1379         last_alloc = mc_pool.last_alloc[0];
1380         current_alloc = mc_pool.current_alloc[0];
1381
1382         i = mc_pool.cores_count;
1383         while (i-- > 1) {
1384                 if (last_alloc > mc_pool.last_alloc[i])
1385                         last_alloc = mc_pool.last_alloc[i];
1386                 if (current_alloc < mc_pool.current_alloc[i])
1387                         current_alloc = mc_pool.current_alloc[i];
1388         }
1389
1390         flow_size_in_bytes = (current_alloc - last_alloc) / mc_pool.rules_count;
1391         printf("\n:: Port %d :: rte_flow size in DPDK layer: %d Bytes\n",
1392                 port, flow_size_in_bytes);
1393 }
1394
1395 static int
1396 run_rte_flow_handler_cores(void *data __rte_unused)
1397 {
1398         uint16_t port;
1399         int lcore_counter = 0;
1400         int lcore_id = rte_lcore_id();
1401         int i;
1402
1403         RTE_LCORE_FOREACH(i) {
1404                 /*  If core not needed return. */
1405                 if (lcore_id == i) {
1406                         printf(":: lcore %d mapped with index %d\n", lcore_id, lcore_counter);
1407                         if (lcore_counter >= (int) mc_pool.cores_count)
1408                                 return 0;
1409                         break;
1410                 }
1411                 lcore_counter++;
1412         }
1413         lcore_id = lcore_counter;
1414
1415         if (lcore_id >= (int) mc_pool.cores_count)
1416                 return 0;
1417
1418         mc_pool.rules_count = rules_count;
1419
1420         flows_handler(lcore_id);
1421
1422         /* Only main core to print total results. */
1423         if (lcore_id != 0)
1424                 return 0;
1425
1426         /* Make sure all cores finished insertion/deletion process. */
1427         rte_eal_mp_wait_lcore();
1428
1429         RTE_ETH_FOREACH_DEV(port) {
1430                 if (has_meter())
1431                         dump_used_cpu_time("Meters:",
1432                                 port, &mc_pool.create_meter);
1433                 dump_used_cpu_time("Flows:",
1434                         port, &mc_pool.create_flow);
1435                 dump_used_mem(port);
1436         }
1437
1438         return 0;
1439 }
1440
1441 static void
1442 signal_handler(int signum)
1443 {
1444         if (signum == SIGINT || signum == SIGTERM) {
1445                 printf("\n\nSignal %d received, preparing to exit...\n",
1446                                         signum);
1447                 printf("Error: Stats are wrong due to sudden signal!\n\n");
1448                 force_quit = true;
1449         }
1450 }
1451
1452 static inline uint16_t
1453 do_rx(struct lcore_info *li, uint16_t rx_port, uint16_t rx_queue)
1454 {
1455         uint16_t cnt = 0;
1456         cnt = rte_eth_rx_burst(rx_port, rx_queue, li->pkts, MAX_PKT_BURST);
1457         li->rx_pkts += cnt;
1458         return cnt;
1459 }
1460
1461 static inline void
1462 do_tx(struct lcore_info *li, uint16_t cnt, uint16_t tx_port,
1463                         uint16_t tx_queue)
1464 {
1465         uint16_t nr_tx = 0;
1466         uint16_t i;
1467
1468         nr_tx = rte_eth_tx_burst(tx_port, tx_queue, li->pkts, cnt);
1469         li->tx_pkts  += nr_tx;
1470         li->tx_drops += cnt - nr_tx;
1471
1472         for (i = nr_tx; i < cnt; i++)
1473                 rte_pktmbuf_free(li->pkts[i]);
1474 }
1475
1476 /*
1477  * Method to convert numbers into pretty numbers that easy
1478  * to read. The design here is to add comma after each three
1479  * digits and set all of this inside buffer.
1480  *
1481  * For example if n = 1799321, the output will be
1482  * 1,799,321 after this method which is easier to read.
1483  */
1484 static char *
1485 pretty_number(uint64_t n, char *buf)
1486 {
1487         char p[6][4];
1488         int i = 0;
1489         int off = 0;
1490
1491         while (n > 1000) {
1492                 sprintf(p[i], "%03d", (int)(n % 1000));
1493                 n /= 1000;
1494                 i += 1;
1495         }
1496
1497         sprintf(p[i++], "%d", (int)n);
1498
1499         while (i--)
1500                 off += sprintf(buf + off, "%s,", p[i]);
1501         buf[strlen(buf) - 1] = '\0';
1502
1503         return buf;
1504 }
1505
1506 static void
1507 packet_per_second_stats(void)
1508 {
1509         struct lcore_info *old;
1510         struct lcore_info *li, *oli;
1511         int nr_lines = 0;
1512         int i;
1513
1514         old = rte_zmalloc("old",
1515                 sizeof(struct lcore_info) * RTE_MAX_LCORE, 0);
1516         if (old == NULL)
1517                 rte_exit(EXIT_FAILURE, "No Memory available!\n");
1518
1519         memcpy(old, lcore_infos,
1520                 sizeof(struct lcore_info) * RTE_MAX_LCORE);
1521
1522         while (!force_quit) {
1523                 uint64_t total_tx_pkts = 0;
1524                 uint64_t total_rx_pkts = 0;
1525                 uint64_t total_tx_drops = 0;
1526                 uint64_t tx_delta, rx_delta, drops_delta;
1527                 char buf[3][32];
1528                 int nr_valid_core = 0;
1529
1530                 sleep(1);
1531
1532                 if (nr_lines) {
1533                         char go_up_nr_lines[16];
1534
1535                         sprintf(go_up_nr_lines, "%c[%dA\r", 27, nr_lines);
1536                         printf("%s\r", go_up_nr_lines);
1537                 }
1538
1539                 printf("\n%6s %16s %16s %16s\n", "core", "tx", "tx drops", "rx");
1540                 printf("%6s %16s %16s %16s\n", "------", "----------------",
1541                         "----------------", "----------------");
1542                 nr_lines = 3;
1543                 for (i = 0; i < RTE_MAX_LCORE; i++) {
1544                         li  = &lcore_infos[i];
1545                         oli = &old[i];
1546                         if (li->mode != LCORE_MODE_PKT)
1547                                 continue;
1548
1549                         tx_delta    = li->tx_pkts  - oli->tx_pkts;
1550                         rx_delta    = li->rx_pkts  - oli->rx_pkts;
1551                         drops_delta = li->tx_drops - oli->tx_drops;
1552                         printf("%6d %16s %16s %16s\n", i,
1553                                 pretty_number(tx_delta,    buf[0]),
1554                                 pretty_number(drops_delta, buf[1]),
1555                                 pretty_number(rx_delta,    buf[2]));
1556
1557                         total_tx_pkts  += tx_delta;
1558                         total_rx_pkts  += rx_delta;
1559                         total_tx_drops += drops_delta;
1560
1561                         nr_valid_core++;
1562                         nr_lines += 1;
1563                 }
1564
1565                 if (nr_valid_core > 1) {
1566                         printf("%6s %16s %16s %16s\n", "total",
1567                                 pretty_number(total_tx_pkts,  buf[0]),
1568                                 pretty_number(total_tx_drops, buf[1]),
1569                                 pretty_number(total_rx_pkts,  buf[2]));
1570                         nr_lines += 1;
1571                 }
1572
1573                 memcpy(old, lcore_infos,
1574                         sizeof(struct lcore_info) * RTE_MAX_LCORE);
1575         }
1576 }
1577
1578 static int
1579 start_forwarding(void *data __rte_unused)
1580 {
1581         int lcore = rte_lcore_id();
1582         int stream_id;
1583         uint16_t cnt;
1584         struct lcore_info *li = &lcore_infos[lcore];
1585
1586         if (!li->mode)
1587                 return 0;
1588
1589         if (li->mode == LCORE_MODE_STATS) {
1590                 printf(":: started stats on lcore %u\n", lcore);
1591                 packet_per_second_stats();
1592                 return 0;
1593         }
1594
1595         while (!force_quit)
1596                 for (stream_id = 0; stream_id < MAX_STREAMS; stream_id++) {
1597                         if (li->streams[stream_id].rx_port == -1)
1598                                 continue;
1599
1600                         cnt = do_rx(li,
1601                                         li->streams[stream_id].rx_port,
1602                                         li->streams[stream_id].rx_queue);
1603                         if (cnt)
1604                                 do_tx(li, cnt,
1605                                         li->streams[stream_id].tx_port,
1606                                         li->streams[stream_id].tx_queue);
1607                 }
1608         return 0;
1609 }
1610
1611 static void
1612 init_lcore_info(void)
1613 {
1614         int i, j;
1615         unsigned int lcore;
1616         uint16_t nr_port;
1617         uint16_t queue;
1618         int port;
1619         int stream_id = 0;
1620         int streams_per_core;
1621         int unassigned_streams;
1622         int nb_fwd_streams;
1623         nr_port = rte_eth_dev_count_avail();
1624
1625         /* First logical core is reserved for stats printing */
1626         lcore = rte_get_next_lcore(-1, 0, 0);
1627         lcore_infos[lcore].mode = LCORE_MODE_STATS;
1628
1629         /*
1630          * Initialize all cores
1631          * All cores at first must have -1 value in all streams
1632          * This means that this stream is not used, or not set
1633          * yet.
1634          */
1635         for (i = 0; i < RTE_MAX_LCORE; i++)
1636                 for (j = 0; j < MAX_STREAMS; j++) {
1637                         lcore_infos[i].streams[j].tx_port = -1;
1638                         lcore_infos[i].streams[j].rx_port = -1;
1639                         lcore_infos[i].streams[j].tx_queue = -1;
1640                         lcore_infos[i].streams[j].rx_queue = -1;
1641                         lcore_infos[i].streams_nb = 0;
1642                 }
1643
1644         /*
1645          * Calculate the total streams count.
1646          * Also distribute those streams count between the available
1647          * logical cores except first core, since it's reserved for
1648          * stats prints.
1649          */
1650         nb_fwd_streams = nr_port * RXQ_NUM;
1651         if ((int)(nb_lcores - 1) >= nb_fwd_streams)
1652                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1653                         lcore = rte_get_next_lcore(lcore, 0, 0);
1654                         lcore_infos[lcore].streams_nb = 1;
1655                 }
1656         else {
1657                 streams_per_core = nb_fwd_streams / (nb_lcores - 1);
1658                 unassigned_streams = nb_fwd_streams % (nb_lcores - 1);
1659                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1660                         lcore = rte_get_next_lcore(lcore, 0, 0);
1661                         lcore_infos[lcore].streams_nb = streams_per_core;
1662                         if (unassigned_streams) {
1663                                 lcore_infos[lcore].streams_nb++;
1664                                 unassigned_streams--;
1665                         }
1666                 }
1667         }
1668
1669         /*
1670          * Set the streams for the cores according to each logical
1671          * core stream count.
1672          * The streams is built on the design of what received should
1673          * forward as well, this means that if you received packets on
1674          * port 0 queue 0 then the same queue should forward the
1675          * packets, using the same logical core.
1676          */
1677         lcore = rte_get_next_lcore(-1, 0, 0);
1678         for (port = 0; port < nr_port; port++) {
1679                 /* Create FWD stream */
1680                 for (queue = 0; queue < RXQ_NUM; queue++) {
1681                         if (!lcore_infos[lcore].streams_nb ||
1682                                 !(stream_id % lcore_infos[lcore].streams_nb)) {
1683                                 lcore = rte_get_next_lcore(lcore, 0, 0);
1684                                 lcore_infos[lcore].mode = LCORE_MODE_PKT;
1685                                 stream_id = 0;
1686                         }
1687                         lcore_infos[lcore].streams[stream_id].rx_queue = queue;
1688                         lcore_infos[lcore].streams[stream_id].tx_queue = queue;
1689                         lcore_infos[lcore].streams[stream_id].rx_port = port;
1690                         lcore_infos[lcore].streams[stream_id].tx_port = port;
1691                         stream_id++;
1692                 }
1693         }
1694
1695         /* Print all streams */
1696         printf(":: Stream -> core id[N]: (rx_port, rx_queue)->(tx_port, tx_queue)\n");
1697         for (i = 0; i < RTE_MAX_LCORE; i++)
1698                 for (j = 0; j < MAX_STREAMS; j++) {
1699                         /* No streams for this core */
1700                         if (lcore_infos[i].streams[j].tx_port == -1)
1701                                 break;
1702                         printf("Stream -> core id[%d]: (%d,%d)->(%d,%d)\n",
1703                                 i,
1704                                 lcore_infos[i].streams[j].rx_port,
1705                                 lcore_infos[i].streams[j].rx_queue,
1706                                 lcore_infos[i].streams[j].tx_port,
1707                                 lcore_infos[i].streams[j].tx_queue);
1708                 }
1709 }
1710
1711 static void
1712 init_port(void)
1713 {
1714         int ret;
1715         uint16_t std_queue;
1716         uint16_t hairpin_queue;
1717         uint16_t port_id;
1718         uint16_t nr_ports;
1719         uint16_t nr_queues;
1720         struct rte_eth_hairpin_conf hairpin_conf = {
1721                 .peer_count = 1,
1722         };
1723         struct rte_eth_conf port_conf = {
1724                 .rx_adv_conf = {
1725                         .rss_conf.rss_hf =
1726                                 GET_RSS_HF(),
1727                 }
1728         };
1729         struct rte_eth_txconf txq_conf;
1730         struct rte_eth_rxconf rxq_conf;
1731         struct rte_eth_dev_info dev_info;
1732
1733         nr_queues = RXQ_NUM;
1734         if (hairpin_queues_num != 0)
1735                 nr_queues = RXQ_NUM + hairpin_queues_num;
1736
1737         nr_ports = rte_eth_dev_count_avail();
1738         if (nr_ports == 0)
1739                 rte_exit(EXIT_FAILURE, "Error: no port detected\n");
1740
1741         mbuf_mp = rte_pktmbuf_pool_create("mbuf_pool",
1742                                         TOTAL_MBUF_NUM, MBUF_CACHE_SIZE,
1743                                         0, MBUF_SIZE,
1744                                         rte_socket_id());
1745         if (mbuf_mp == NULL)
1746                 rte_exit(EXIT_FAILURE, "Error: can't init mbuf pool\n");
1747
1748         for (port_id = 0; port_id < nr_ports; port_id++) {
1749                 ret = rte_eth_dev_info_get(port_id, &dev_info);
1750                 if (ret != 0)
1751                         rte_exit(EXIT_FAILURE,
1752                                 "Error during getting device"
1753                                 " (port %u) info: %s\n",
1754                                 port_id, strerror(-ret));
1755
1756                 port_conf.txmode.offloads &= dev_info.tx_offload_capa;
1757                 port_conf.rxmode.offloads &= dev_info.rx_offload_capa;
1758
1759                 printf(":: initializing port: %d\n", port_id);
1760
1761                 ret = rte_eth_dev_configure(port_id, nr_queues,
1762                                 nr_queues, &port_conf);
1763                 if (ret < 0)
1764                         rte_exit(EXIT_FAILURE,
1765                                 ":: cannot configure device: err=%d, port=%u\n",
1766                                 ret, port_id);
1767
1768                 rxq_conf = dev_info.default_rxconf;
1769                 for (std_queue = 0; std_queue < RXQ_NUM; std_queue++) {
1770                         ret = rte_eth_rx_queue_setup(port_id, std_queue, NR_RXD,
1771                                         rte_eth_dev_socket_id(port_id),
1772                                         &rxq_conf,
1773                                         mbuf_mp);
1774                         if (ret < 0)
1775                                 rte_exit(EXIT_FAILURE,
1776                                         ":: Rx queue setup failed: err=%d, port=%u\n",
1777                                         ret, port_id);
1778                 }
1779
1780                 txq_conf = dev_info.default_txconf;
1781                 for (std_queue = 0; std_queue < TXQ_NUM; std_queue++) {
1782                         ret = rte_eth_tx_queue_setup(port_id, std_queue, NR_TXD,
1783                                         rte_eth_dev_socket_id(port_id),
1784                                         &txq_conf);
1785                         if (ret < 0)
1786                                 rte_exit(EXIT_FAILURE,
1787                                         ":: Tx queue setup failed: err=%d, port=%u\n",
1788                                         ret, port_id);
1789                 }
1790
1791                 /* Catch all packets from traffic generator. */
1792                 ret = rte_eth_promiscuous_enable(port_id);
1793                 if (ret != 0)
1794                         rte_exit(EXIT_FAILURE,
1795                                 ":: promiscuous mode enable failed: err=%s, port=%u\n",
1796                                 rte_strerror(-ret), port_id);
1797
1798                 if (hairpin_queues_num != 0) {
1799                         /*
1800                          * Configure peer which represents hairpin Tx.
1801                          * Hairpin queue numbers start after standard queues
1802                          * (RXQ_NUM and TXQ_NUM).
1803                          */
1804                         for (hairpin_queue = RXQ_NUM, std_queue = 0;
1805                                         hairpin_queue < nr_queues;
1806                                         hairpin_queue++, std_queue++) {
1807                                 hairpin_conf.peers[0].port = port_id;
1808                                 hairpin_conf.peers[0].queue =
1809                                         std_queue + TXQ_NUM;
1810                                 ret = rte_eth_rx_hairpin_queue_setup(
1811                                                 port_id, hairpin_queue,
1812                                                 NR_RXD, &hairpin_conf);
1813                                 if (ret != 0)
1814                                         rte_exit(EXIT_FAILURE,
1815                                                 ":: Hairpin rx queue setup failed: err=%d, port=%u\n",
1816                                                 ret, port_id);
1817                         }
1818
1819                         for (hairpin_queue = TXQ_NUM, std_queue = 0;
1820                                         hairpin_queue < nr_queues;
1821                                         hairpin_queue++, std_queue++) {
1822                                 hairpin_conf.peers[0].port = port_id;
1823                                 hairpin_conf.peers[0].queue =
1824                                         std_queue + RXQ_NUM;
1825                                 ret = rte_eth_tx_hairpin_queue_setup(
1826                                                 port_id, hairpin_queue,
1827                                                 NR_TXD, &hairpin_conf);
1828                                 if (ret != 0)
1829                                         rte_exit(EXIT_FAILURE,
1830                                                 ":: Hairpin tx queue setup failed: err=%d, port=%u\n",
1831                                                 ret, port_id);
1832                         }
1833                 }
1834
1835                 ret = rte_eth_dev_start(port_id);
1836                 if (ret < 0)
1837                         rte_exit(EXIT_FAILURE,
1838                                 "rte_eth_dev_start:err=%d, port=%u\n",
1839                                 ret, port_id);
1840
1841                 printf(":: initializing port: %d done\n", port_id);
1842         }
1843 }
1844
1845 int
1846 main(int argc, char **argv)
1847 {
1848         int ret;
1849         uint16_t port;
1850         struct rte_flow_error error;
1851
1852         ret = rte_eal_init(argc, argv);
1853         if (ret < 0)
1854                 rte_exit(EXIT_FAILURE, "EAL init failed\n");
1855
1856         force_quit = false;
1857         dump_iterations = false;
1858         rules_count = DEFAULT_RULES_COUNT;
1859         rules_batch = DEFAULT_RULES_BATCH;
1860         delete_flag = false;
1861         dump_socket_mem_flag = false;
1862         flow_group = DEFAULT_GROUP;
1863
1864         signal(SIGINT, signal_handler);
1865         signal(SIGTERM, signal_handler);
1866
1867         argc -= ret;
1868         argv += ret;
1869         if (argc > 1)
1870                 args_parse(argc, argv);
1871
1872         init_port();
1873
1874         nb_lcores = rte_lcore_count();
1875         if (nb_lcores <= 1)
1876                 rte_exit(EXIT_FAILURE, "This app needs at least two cores\n");
1877
1878
1879         printf(":: Flows Count per port: %d\n\n", rules_count);
1880
1881         if (has_meter())
1882                 create_meter_profile();
1883         rte_eal_mp_remote_launch(run_rte_flow_handler_cores, NULL, CALL_MAIN);
1884
1885         if (enable_fwd) {
1886                 init_lcore_info();
1887                 rte_eal_mp_remote_launch(start_forwarding, NULL, CALL_MAIN);
1888         }
1889         if (has_meter() && delete_flag)
1890                 destroy_meter_profile();
1891
1892         RTE_ETH_FOREACH_DEV(port) {
1893                 rte_flow_flush(port, &error);
1894                 if (rte_eth_dev_stop(port) != 0)
1895                         printf("Failed to stop device on port %u\n", port);
1896                 rte_eth_dev_close(port);
1897         }
1898         printf("\nBye ...\n");
1899         return 0;
1900 }