app/pipeline: packet framework benchmark
[dpdk.git] / app / test-pipeline / pipeline_lpm_ipv6.c
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #include <stdio.h>
35 #include <stdlib.h>
36 #include <stdint.h>
37
38 #include <rte_log.h>
39 #include <rte_ethdev.h>
40 #include <rte_ether.h>
41 #include <rte_ip.h>
42 #include <rte_byteorder.h>
43
44 #include <rte_port_ring.h>
45 #include <rte_table_lpm_ipv6.h>
46 #include <rte_pipeline.h>
47
48 #include "main.h"
49
50 void
51 app_main_loop_worker_pipeline_lpm_ipv6(void) {
52         struct rte_pipeline_params pipeline_params = {
53                 .name = "pipeline",
54                 .socket_id = rte_socket_id(),
55         };
56
57         struct rte_pipeline *p;
58         uint32_t port_in_id[APP_MAX_PORTS];
59         uint32_t port_out_id[APP_MAX_PORTS];
60         uint32_t table_id;
61         uint32_t i;
62
63         RTE_LOG(INFO, USER1,
64                 "Core %u is doing work (pipeline with IPv6 LPM table)\n",
65                 rte_lcore_id());
66
67         /* Pipeline configuration */
68         p = rte_pipeline_create(&pipeline_params);
69         if (p == NULL)
70                 rte_panic("Unable to configure the pipeline\n");
71
72         /* Input port configuration */
73         for (i = 0; i < app.n_ports; i++) {
74                 struct rte_port_ring_reader_params port_ring_params = {
75                         .ring = app.rings_rx[i],
76                 };
77
78                 struct rte_pipeline_port_in_params port_params = {
79                         .ops = &rte_port_ring_reader_ops,
80                         .arg_create = (void *) &port_ring_params,
81                         .f_action = NULL,
82                         .arg_ah = NULL,
83                         .burst_size = app.burst_size_worker_read,
84                 };
85
86                 if (rte_pipeline_port_in_create(p, &port_params,
87                         &port_in_id[i]))
88                         rte_panic("Unable to configure input port for "
89                                 "ring %d\n", i);
90         }
91
92         /* Output port configuration */
93         for (i = 0; i < app.n_ports; i++) {
94                 struct rte_port_ring_writer_params port_ring_params = {
95                         .ring = app.rings_tx[i],
96                         .tx_burst_sz = app.burst_size_worker_write,
97                 };
98
99                 struct rte_pipeline_port_out_params port_params = {
100                         .ops = &rte_port_ring_writer_ops,
101                         .arg_create = (void *) &port_ring_params,
102                         .f_action = NULL,
103                         .f_action_bulk = NULL,
104                         .arg_ah = NULL,
105                 };
106
107                 if (rte_pipeline_port_out_create(p, &port_params,
108                         &port_out_id[i]))
109                         rte_panic("Unable to configure output port for "
110                                 "ring %d\n", i);
111         }
112
113         /* Table configuration */
114         {
115                 struct rte_table_lpm_ipv6_params table_lpm_ipv6_params = {
116                         .n_rules = 1 << 24,
117                         .number_tbl8s = 1 << 21,
118                         .entry_unique_size =
119                                 sizeof(struct rte_pipeline_table_entry),
120                         .offset = 32,
121                 };
122
123                 struct rte_pipeline_table_params table_params = {
124                         .ops = &rte_table_lpm_ipv6_ops,
125                         .arg_create = &table_lpm_ipv6_params,
126                         .f_action_hit = NULL,
127                         .f_action_miss = NULL,
128                         .arg_ah = NULL,
129                         .action_data_size = 0,
130                 };
131
132                 if (rte_pipeline_table_create(p, &table_params, &table_id))
133                         rte_panic("Unable to configure the IPv6 LPM table\n");
134         }
135
136         /* Interconnecting ports and tables */
137         for (i = 0; i < app.n_ports; i++)
138                 if (rte_pipeline_port_in_connect_to_table(p, port_in_id[i],
139                         table_id))
140                         rte_panic("Unable to connect input port %u to "
141                                 "table %u\n", port_in_id[i],  table_id);
142
143         /* Add entries to tables */
144         for (i = 0; i < app.n_ports; i++) {
145                 struct rte_pipeline_table_entry entry = {
146                         .action = RTE_PIPELINE_ACTION_PORT,
147                         {.port_id = port_out_id[i & (app.n_ports - 1)]},
148                 };
149
150                 struct rte_table_lpm_ipv6_key key;
151                 struct rte_pipeline_table_entry *entry_ptr;
152                 uint32_t ip;
153                 int key_found, status;
154
155                 key.depth = 8 + __builtin_popcount(app.n_ports - 1);
156
157                 ip = rte_bswap32(i << (24 -
158                         __builtin_popcount(app.n_ports - 1)));
159                 memcpy(key.ip, &ip, sizeof(uint32_t));
160
161                 printf("Adding rule to IPv6 LPM table (IPv6 destination = "
162                         "%.2x%.2x:%.2x%.2x:%.2x%.2x:%.2x%.2x:"
163                         "%.2x%.2x:%.2x%.2x:%.2x%.2x:%.2x%.2x/%u => "
164                         "port out = %u)\n",
165                         key.ip[0], key.ip[1], key.ip[2], key.ip[3],
166                         key.ip[4], key.ip[5], key.ip[6], key.ip[7],
167                         key.ip[8], key.ip[9], key.ip[10], key.ip[11],
168                         key.ip[12], key.ip[13], key.ip[14], key.ip[15],
169                         key.depth, i);
170
171                 status = rte_pipeline_table_entry_add(p, table_id, &key, &entry,
172                         &key_found, &entry_ptr);
173                 if (status < 0)
174                         rte_panic("Unable to add entry to table %u (%d)\n",
175                                 table_id, status);
176         }
177
178         /* Enable input ports */
179         for (i = 0; i < app.n_ports; i++)
180                 if (rte_pipeline_port_in_enable(p, port_in_id[i]))
181                         rte_panic("Unable to enable input port %u\n",
182                                 port_in_id[i]);
183
184         /* Check pipeline consistency */
185         if (rte_pipeline_check(p) < 0)
186                 rte_panic("Pipeline consistency check failed\n");
187
188         /* Run-time */
189 #if APP_FLUSH == 0
190         for ( ; ; )
191                 rte_pipeline_run(p);
192 #else
193         for (i = 0; ; i++) {
194                 rte_pipeline_run(p);
195
196                 if ((i & APP_FLUSH) == 0)
197                         rte_pipeline_flush(p);
198         }
199 #endif
200 }