app/test-pmd/parameters.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2017 Intel Corporation
   3  */
   4
   5 #include <errno.h>
   6 #include <getopt.h>
   7 #include <stdarg.h>
   8 #include <stdio.h>
   9 #include <stdlib.h>
  10 #include <signal.h>
  11 #include <string.h>
  12 #include <time.h>
  13 #include <fcntl.h>
  14 #include <sys/types.h>
  15
  16 #include <sys/queue.h>
  17 #include <sys/stat.h>
  18
  19 #include <stdint.h>
  20 #include <unistd.h>
  21 #include <inttypes.h>
  22 #include <arpa/inet.h>
  23
  24 #include <rte_common.h>
  25 #include <rte_byteorder.h>
  26 #include <rte_log.h>
  27 #include <rte_debug.h>
  28 #include <rte_cycles.h>
  29 #include <rte_memory.h>
  30 #include <rte_launch.h>
  31 #include <rte_eal.h>
  32 #include <rte_per_lcore.h>
  33 #include <rte_lcore.h>
  34 #include <rte_atomic.h>
  35 #include <rte_branch_prediction.h>
  36 #include <rte_mempool.h>
  37 #include <rte_interrupts.h>
  38 #include <rte_pci.h>
  39 #include <rte_ether.h>
  40 #include <rte_ethdev.h>
  41 #include <rte_string_fns.h>
  42 #ifdef RTE_LIBRTE_PMD_BOND
  43 #include <rte_eth_bond.h>
  44 #endif
  45 #include <rte_flow.h>
  46
  47 #include "testpmd.h"
  48
  49 static void
  50 usage(char* progname)
  51 {
  52         printf("usage: %s [EAL options] -- "
  53 #ifdef RTE_LIBRTE_CMDLINE
  54                "[--interactive|-i] "
  55                "[--cmdline-file=FILENAME] "
  56 #endif
  57                "[--help|-h] | [--auto-start|-a] | ["
  58                "--tx-first | --stats-period=PERIOD | "
  59                "--coremask=COREMASK --portmask=PORTMASK --numa "
  60                "--portlist=PORTLIST "
  61                "--mbuf-size= | --total-num-mbufs= | "
  62                "--nb-cores= | --nb-ports= | "
  63 #ifdef RTE_LIBRTE_CMDLINE
  64                "--eth-peers-configfile= | "
  65                "--eth-peer=X,M:M:M:M:M:M | "
  66                "--tx-ip=SRC,DST | --tx-udp=PORT | "
  67 #endif
  68                "--pkt-filter-mode= |"
  69                "--rss-ip | --rss-udp | --rss-level-inner | --rss-level-outer |"
  70                "--rxpt= | --rxht= | --rxwt= |"
  71                " --rxfreet= | --txpt= | --txht= | --txwt= | --txfreet= | "
  72                "--txrst= | --tx-offloads= | | --rx-offloads= | "
  73                "--vxlan-gpe-port= | --record-core-cycles | "
  74                "--record-burst-stats]\n",
  75                progname);
  76 #ifdef RTE_LIBRTE_CMDLINE
  77         printf("  --interactive: run in interactive mode.\n");
  78         printf("  --cmdline-file: execute cli commands before startup.\n");
  79 #endif
  80         printf("  --auto-start: start forwarding on init "
  81                "[always when non-interactive].\n");
  82         printf("  --help: display this message and quit.\n");
  83         printf("  --tx-first: start forwarding sending a burst first "
  84                "(only if interactive is disabled).\n");
  85         printf("  --stats-period=PERIOD: statistics will be shown "
  86                "every PERIOD seconds (only if interactive is disabled).\n");
  87         printf("  --nb-cores=N: set the number of forwarding cores "
  88                "(1 <= N <= %d).\n", nb_lcores);
  89         printf("  --nb-ports=N: set the number of forwarding ports "
  90                "(1 <= N <= %d).\n", nb_ports);
  91         printf("  --coremask=COREMASK: hexadecimal bitmask of cores running "
  92                "the packet forwarding test. The master lcore is reserved for "
  93                "command line parsing only, and cannot be masked on for "
  94                "packet forwarding.\n");
  95         printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
  96                "by the packet forwarding test.\n");
  97         printf("  --portlist=PORTLIST: list of forwarding ports\n");
  98         printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
  99                "RX memory buffers (mbufs).\n");
 100         printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
 101                "specify the socket on which the memory pool "
 102                "used by the port will be allocated.\n");
 103         printf("  --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
 104                "specify the socket on which the TX/RX rings for "
 105                "the port will be allocated "
 106                "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
 107         printf("  --socket-num=N: set socket from which all memory is allocated "
 108                "in NUMA mode.\n");
 109         printf("  --mbuf-size=N: set the data size of mbuf to N bytes.\n");
 110         printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
 111                "in mbuf pools.\n");
 112         printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
 113         printf("  --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
 114                "size to N bytes.\n");
 115 #ifdef RTE_LIBRTE_CMDLINE
 116         printf("  --eth-peers-configfile=name: config file with ethernet addresses "
 117                "of peer ports.\n");
 118         printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
 119                "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
 120 #endif
 121         printf("  --pkt-filter-mode=N: set Flow Director mode "
 122                "(N: none (default mode) or signature or perfect).\n");
 123         printf("  --pkt-filter-report-hash=N: set Flow Director report mode "
 124                "(N: none  or match (default) or always).\n");
 125         printf("  --pkt-filter-size=N: set Flow Director mode "
 126                "(N: 64K (default mode) or 128K or 256K).\n");
 127         printf("  --pkt-filter-drop-queue=N: set drop-queue. "
 128                "In perfect mode, when you add a rule with queue = -1 "
 129                "the packet will be enqueued into the rx drop-queue. "
 130                "If the drop-queue doesn't exist, the packet is dropped. "
 131                "By default drop-queue=127.\n");
 132 #ifdef RTE_LIBRTE_LATENCY_STATS
 133         printf("  --latencystats=N: enable latency and jitter statistcs "
 134                "monitoring on forwarding lcore id N.\n");
 135 #endif
 136         printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
 137         printf("  --enable-lro: enable large receive offload.\n");
 138         printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 139         printf("  --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
 140         printf("  --enable-hw-vlan: enable hardware vlan.\n");
 141         printf("  --enable-hw-vlan-filter: enable hardware vlan filter.\n");
 142         printf("  --enable-hw-vlan-strip: enable hardware vlan strip.\n");
 143         printf("  --enable-hw-vlan-extend: enable hardware vlan extend.\n");
 144         printf("  --enable-hw-qinq-strip: enable hardware qinq strip.\n");
 145         printf("  --enable-drop-en: enable per queue packet drop.\n");
 146         printf("  --disable-rss: disable rss.\n");
 147         printf("  --port-topology=<paired|chained|loop>: set port topology (paired "
 148                "is default).\n");
 149         printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
 150                list_pkt_forwarding_modes());
 151         printf("  --forward-mode=5tswap: set forwarding mode to "
 152                         "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
 153         printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
 154         printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
 155         printf("  --rss-level-inner: set RSS hash level to innermost\n");
 156         printf("  --rss-level-outer: set RSS hash level to outermost\n");
 157         printf("  --rxq=N: set the number of RX queues per port to N.\n");
 158         printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
 159         printf("  --txq=N: set the number of TX queues per port to N.\n");
 160         printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
 161         printf("  --hairpinq=N: set the number of hairpin queues per port to "
 162                "N.\n");
 163         printf("  --burst=N: set the number of packets per burst to N.\n");
 164         printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
 165         printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
 166         printf("  --rxht=N: set the host threshold register of RX rings to N.\n");
 167         printf("  --rxfreet=N: set the free threshold of RX descriptors to N "
 168                "(0 <= N < value of rxd).\n");
 169         printf("  --rxwt=N: set the write-back threshold register of RX rings to N.\n");
 170         printf("  --txpt=N: set the prefetch threshold register of TX rings to N.\n");
 171         printf("  --txht=N: set the nhost threshold register of TX rings to N.\n");
 172         printf("  --txwt=N: set the write-back threshold register of TX rings to N.\n");
 173         printf("  --txfreet=N: set the transmit free threshold of TX rings to N "
 174                "(0 <= N <= value of txd).\n");
 175         printf("  --txrst=N: set the transmit RS bit threshold of TX rings to N "
 176                "(0 <= N <= value of txd).\n");
 177         printf("  --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
 178                "tx queues statistics counters mapping "
 179                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
 180         printf("  --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
 181                "rx queues statistics counters mapping "
 182                "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
 183         printf("  --no-flush-rx: Don't flush RX streams before forwarding."
 184                " Used mainly with PCAP drivers.\n");
 185         printf("  --txpkts=X[,Y]*: set TX segment sizes"
 186                 " or total packet length.\n");
 187         printf("  --txonly-multi-flow: generate multiple flows in txonly mode\n");
 188         printf("  --disable-link-check: disable check on link status when "
 189                "starting/stopping ports.\n");
 190         printf("  --disable-device-start: do not automatically start port\n");
 191         printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
 192         printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
 193         printf("  --bitrate-stats=N: set the logical core N to perform "
 194                 "bit-rate calculation.\n");
 195         printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 196                "enable print of designated event or all of them.\n");
 197         printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 198                "disable print of designated event or all of them.\n");
 199         printf("  --flow-isolate-all: "
 200                "requests flow API isolated mode on all ports at initialization time.\n");
 201         printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
 202         printf("  --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
 203         printf("  --hot-plug: enable hot plug for device.\n");
 204         printf("  --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
 205         printf("  --mlockall: lock all memory\n");
 206         printf("  --no-mlockall: do not lock all memory\n");
 207         printf("  --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
 208                "    native: use regular DPDK memory to create and populate mempool\n"
 209                "    anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
 210                "    xmem: use anonymous memory to create and populate mempool\n"
 211                "    xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
 212         printf("  --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
 213         printf("  --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
 214         printf("  --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
 215         printf("  --noisy-lkup-num-writes=N: do N random writes per packet\n");
 216         printf("  --noisy-lkup-num-reads=N: do N random reads per packet\n");
 217         printf("  --noisy-lkup-num-writes=N: do N random reads and writes per packet\n");
 218         printf("  --no-iova-contig: mempool memory can be IOVA non contiguous. "
 219                "valid only with --mp-alloc=anon\n");
 220         printf("  --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
 221                "enabled\n");
 222         printf("  --record-core-cycles: enable measurement of CPU cycles.\n");
 223         printf("  --record-burst-stats: enable display of RX and TX bursts.\n");
 224 }
 225
 226 #ifdef RTE_LIBRTE_CMDLINE
 227 static int
 228 init_peer_eth_addrs(char *config_filename)
 229 {
 230         FILE *config_file;
 231         portid_t i;
 232         char buf[50];
 233
 234         config_file = fopen(config_filename, "r");
 235         if (config_file == NULL) {
 236                 perror("Failed to open eth config file\n");
 237                 return -1;
 238         }
 239
 240         for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
 241
 242                 if (fgets(buf, sizeof(buf), config_file) == NULL)
 243                         break;
 244
 245                 if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
 246                         printf("Bad MAC address format on line %d\n", i+1);
 247                         fclose(config_file);
 248                         return -1;
 249                 }
 250         }
 251         fclose(config_file);
 252         nb_peer_eth_addrs = (portid_t) i;
 253         return 0;
 254 }
 255 #endif
 256
 257 /*
 258  * Parse the coremask given as argument (hexadecimal string) and set
 259  * the global configuration of forwarding cores.
 260  */
 261 static void
 262 parse_fwd_coremask(const char *coremask)
 263 {
 264         char *end;
 265         unsigned long long int cm;
 266
 267         /* parse hexadecimal string */
 268         end = NULL;
 269         cm = strtoull(coremask, &end, 16);
 270         if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
 271                 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
 272         else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
 273                 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
 274 }
 275
 276 /*
 277  * Parse the coremask given as argument (hexadecimal string) and set
 278  * the global configuration of forwarding cores.
 279  */
 280 static void
 281 parse_fwd_portmask(const char *portmask)
 282 {
 283         char *end;
 284         unsigned long long int pm;
 285
 286         /* parse hexadecimal string */
 287         end = NULL;
 288         pm = strtoull(portmask, &end, 16);
 289         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 290                 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 291         else
 292                 set_fwd_ports_mask((uint64_t) pm);
 293 }
 294
 295
 296 static int
 297 parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
 298 {
 299         char s[256];
 300         const char *p, *p0 = q_arg;
 301         char *end;
 302         enum fieldnames {
 303                 FLD_PORT = 0,
 304                 FLD_QUEUE,
 305                 FLD_STATS_COUNTER,
 306                 _NUM_FLD
 307         };
 308         unsigned long int_fld[_NUM_FLD];
 309         char *str_fld[_NUM_FLD];
 310         int i;
 311         unsigned size;
 312
 313         /* reset from value set at definition */
 314         is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
 315
 316         while ((p = strchr(p0,'(')) != NULL) {
 317                 ++p;
 318                 if((p0 = strchr(p,')')) == NULL)
 319                         return -1;
 320
 321                 size = p0 - p;
 322                 if(size >= sizeof(s))
 323                         return -1;
 324
 325                 snprintf(s, sizeof(s), "%.*s", size, p);
 326                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 327                         return -1;
 328                 for (i = 0; i < _NUM_FLD; i++){
 329                         errno = 0;
 330                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 331                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 332                                 return -1;
 333                 }
 334                 /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
 335                 if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
 336                         printf("Stats counter not in the correct range 0..%d\n",
 337                                         RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
 338                         return -1;
 339                 }
 340
 341                 if (!is_rx) {
 342                         if ((nb_tx_queue_stats_mappings >=
 343                                                 MAX_TX_QUEUE_STATS_MAPPINGS)) {
 344                                 printf("exceeded max number of TX queue "
 345                                                 "statistics mappings: %hu\n",
 346                                                 nb_tx_queue_stats_mappings);
 347                                 return -1;
 348                         }
 349                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
 350                                 (uint8_t)int_fld[FLD_PORT];
 351                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
 352                                 (uint8_t)int_fld[FLD_QUEUE];
 353                         tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
 354                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
 355                         ++nb_tx_queue_stats_mappings;
 356                 }
 357                 else {
 358                         if ((nb_rx_queue_stats_mappings >=
 359                                                 MAX_RX_QUEUE_STATS_MAPPINGS)) {
 360                                 printf("exceeded max number of RX queue "
 361                                                 "statistics mappings: %hu\n",
 362                                                 nb_rx_queue_stats_mappings);
 363                                 return -1;
 364                         }
 365                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
 366                                 (uint8_t)int_fld[FLD_PORT];
 367                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
 368                                 (uint8_t)int_fld[FLD_QUEUE];
 369                         rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
 370                                 (uint8_t)int_fld[FLD_STATS_COUNTER];
 371                         ++nb_rx_queue_stats_mappings;
 372                 }
 373
 374         }
 375 /* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
 376 /* than to the default array (that was set at its definition) */
 377         is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
 378                 (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
 379         return 0;
 380 }
 381
 382 static void
 383 print_invalid_socket_id_error(void)
 384 {
 385         unsigned int i = 0;
 386
 387         printf("Invalid socket id, options are: ");
 388         for (i = 0; i < num_sockets; i++) {
 389                 printf("%u%s", socket_ids[i],
 390                       (i == num_sockets - 1) ? "\n" : ",");
 391         }
 392 }
 393
 394 static int
 395 parse_portnuma_config(const char *q_arg)
 396 {
 397         char s[256];
 398         const char *p, *p0 = q_arg;
 399         char *end;
 400         uint8_t i, socket_id;
 401         portid_t port_id;
 402         unsigned size;
 403         enum fieldnames {
 404                 FLD_PORT = 0,
 405                 FLD_SOCKET,
 406                 _NUM_FLD
 407         };
 408         unsigned long int_fld[_NUM_FLD];
 409         char *str_fld[_NUM_FLD];
 410
 411         /* reset from value set at definition */
 412         while ((p = strchr(p0,'(')) != NULL) {
 413                 ++p;
 414                 if((p0 = strchr(p,')')) == NULL)
 415                         return -1;
 416
 417                 size = p0 - p;
 418                 if(size >= sizeof(s))
 419                         return -1;
 420
 421                 snprintf(s, sizeof(s), "%.*s", size, p);
 422                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 423                         return -1;
 424                 for (i = 0; i < _NUM_FLD; i++) {
 425                         errno = 0;
 426                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 427                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 428                                 return -1;
 429                 }
 430                 port_id = (portid_t)int_fld[FLD_PORT];
 431                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 432                         port_id == (portid_t)RTE_PORT_ALL) {
 433                         print_valid_ports();
 434                         return -1;
 435                 }
 436                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 437                 if (new_socket_id(socket_id)) {
 438                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 439                                 print_invalid_socket_id_error();
 440                                 return -1;
 441                         }
 442                         socket_ids[num_sockets++] = socket_id;
 443                 }
 444                 port_numa[port_id] = socket_id;
 445         }
 446
 447         return 0;
 448 }
 449
 450 static int
 451 parse_ringnuma_config(const char *q_arg)
 452 {
 453         char s[256];
 454         const char *p, *p0 = q_arg;
 455         char *end;
 456         uint8_t i, ring_flag, socket_id;
 457         portid_t port_id;
 458         unsigned size;
 459         enum fieldnames {
 460                 FLD_PORT = 0,
 461                 FLD_FLAG,
 462                 FLD_SOCKET,
 463                 _NUM_FLD
 464         };
 465         unsigned long int_fld[_NUM_FLD];
 466         char *str_fld[_NUM_FLD];
 467         #define RX_RING_ONLY 0x1
 468         #define TX_RING_ONLY 0x2
 469         #define RXTX_RING    0x3
 470
 471         /* reset from value set at definition */
 472         while ((p = strchr(p0,'(')) != NULL) {
 473                 ++p;
 474                 if((p0 = strchr(p,')')) == NULL)
 475                         return -1;
 476
 477                 size = p0 - p;
 478                 if(size >= sizeof(s))
 479                         return -1;
 480
 481                 snprintf(s, sizeof(s), "%.*s", size, p);
 482                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 483                         return -1;
 484                 for (i = 0; i < _NUM_FLD; i++) {
 485                         errno = 0;
 486                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 487                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 488                                 return -1;
 489                 }
 490                 port_id = (portid_t)int_fld[FLD_PORT];
 491                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 492                         port_id == (portid_t)RTE_PORT_ALL) {
 493                         print_valid_ports();
 494                         return -1;
 495                 }
 496                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 497                 if (new_socket_id(socket_id)) {
 498                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 499                                 print_invalid_socket_id_error();
 500                                 return -1;
 501                         }
 502                         socket_ids[num_sockets++] = socket_id;
 503                 }
 504                 ring_flag = (uint8_t)int_fld[FLD_FLAG];
 505                 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
 506                         printf("Invalid ring-flag=%d config for port =%d\n",
 507                                 ring_flag,port_id);
 508                         return -1;
 509                 }
 510
 511                 switch (ring_flag & RXTX_RING) {
 512                 case RX_RING_ONLY:
 513                         rxring_numa[port_id] = socket_id;
 514                         break;
 515                 case TX_RING_ONLY:
 516                         txring_numa[port_id] = socket_id;
 517                         break;
 518                 case RXTX_RING:
 519                         rxring_numa[port_id] = socket_id;
 520                         txring_numa[port_id] = socket_id;
 521                         break;
 522                 default:
 523                         printf("Invalid ring-flag=%d config for port=%d\n",
 524                                 ring_flag,port_id);
 525                         break;
 526                 }
 527         }
 528
 529         return 0;
 530 }
 531
 532 static int
 533 parse_event_printing_config(const char *optarg, int enable)
 534 {
 535         uint32_t mask = 0;
 536
 537         if (!strcmp(optarg, "unknown"))
 538                 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
 539         else if (!strcmp(optarg, "intr_lsc"))
 540                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
 541         else if (!strcmp(optarg, "queue_state"))
 542                 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
 543         else if (!strcmp(optarg, "intr_reset"))
 544                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
 545         else if (!strcmp(optarg, "vf_mbox"))
 546                 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
 547         else if (!strcmp(optarg, "ipsec"))
 548                 mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
 549         else if (!strcmp(optarg, "macsec"))
 550                 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
 551         else if (!strcmp(optarg, "intr_rmv"))
 552                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
 553         else if (!strcmp(optarg, "dev_probed"))
 554                 mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
 555         else if (!strcmp(optarg, "dev_released"))
 556                 mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
 557         else if (!strcmp(optarg, "flow_aged"))
 558                 mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
 559         else if (!strcmp(optarg, "all"))
 560                 mask = ~UINT32_C(0);
 561         else {
 562                 fprintf(stderr, "Invalid event: %s\n", optarg);
 563                 return -1;
 564         }
 565         if (enable)
 566                 event_print_mask |= mask;
 567         else
 568                 event_print_mask &= ~mask;
 569         return 0;
 570 }
 571
 572 void
 573 launch_args_parse(int argc, char** argv)
 574 {
 575         int n, opt;
 576         char **argvopt;
 577         int opt_idx;
 578         portid_t pid;
 579         enum { TX, RX };
 580         /* Default offloads for all ports. */
 581         uint64_t rx_offloads = rx_mode.offloads;
 582         uint64_t tx_offloads = tx_mode.offloads;
 583         struct rte_eth_dev_info dev_info;
 584         uint16_t rec_nb_pkts;
 585         int ret;
 586
 587         static struct option lgopts[] = {
 588                 { "help",                       0, 0, 0 },
 589 #ifdef RTE_LIBRTE_CMDLINE
 590                 { "interactive",                0, 0, 0 },
 591                 { "cmdline-file",               1, 0, 0 },
 592                 { "auto-start",                 0, 0, 0 },
 593                 { "eth-peers-configfile",       1, 0, 0 },
 594                 { "eth-peer",                   1, 0, 0 },
 595 #endif
 596                 { "tx-first",                   0, 0, 0 },
 597                 { "stats-period",               1, 0, 0 },
 598                 { "ports",                      1, 0, 0 },
 599                 { "nb-cores",                   1, 0, 0 },
 600                 { "nb-ports",                   1, 0, 0 },
 601                 { "coremask",                   1, 0, 0 },
 602                 { "portmask",                   1, 0, 0 },
 603                 { "portlist",                   1, 0, 0 },
 604                 { "numa",                       0, 0, 0 },
 605                 { "no-numa",                    0, 0, 0 },
 606                 { "mp-anon",                    0, 0, 0 },
 607                 { "port-numa-config",           1, 0, 0 },
 608                 { "ring-numa-config",           1, 0, 0 },
 609                 { "socket-num",                 1, 0, 0 },
 610                 { "mbuf-size",                  1, 0, 0 },
 611                 { "total-num-mbufs",            1, 0, 0 },
 612                 { "max-pkt-len",                1, 0, 0 },
 613                 { "max-lro-pkt-size",           1, 0, 0 },
 614                 { "pkt-filter-mode",            1, 0, 0 },
 615                 { "pkt-filter-report-hash",     1, 0, 0 },
 616                 { "pkt-filter-size",            1, 0, 0 },
 617                 { "pkt-filter-drop-queue",      1, 0, 0 },
 618 #ifdef RTE_LIBRTE_LATENCY_STATS
 619                 { "latencystats",               1, 0, 0 },
 620 #endif
 621 #ifdef RTE_LIBRTE_BITRATESTATS
 622                 { "bitrate-stats",              1, 0, 0 },
 623 #endif
 624                 { "disable-crc-strip",          0, 0, 0 },
 625                 { "enable-lro",                 0, 0, 0 },
 626                 { "enable-rx-cksum",            0, 0, 0 },
 627                 { "enable-rx-timestamp",        0, 0, 0 },
 628                 { "enable-scatter",             0, 0, 0 },
 629                 { "enable-hw-vlan",             0, 0, 0 },
 630                 { "enable-hw-vlan-filter",      0, 0, 0 },
 631                 { "enable-hw-vlan-strip",       0, 0, 0 },
 632                 { "enable-hw-vlan-extend",      0, 0, 0 },
 633                 { "enable-hw-qinq-strip",       0, 0, 0 },
 634                 { "enable-drop-en",            0, 0, 0 },
 635                 { "disable-rss",                0, 0, 0 },
 636                 { "port-topology",              1, 0, 0 },
 637                 { "forward-mode",               1, 0, 0 },
 638                 { "rss-ip",                     0, 0, 0 },
 639                 { "rss-udp",                    0, 0, 0 },
 640                 { "rss-level-outer",            0, 0, 0 },
 641                 { "rss-level-inner",            0, 0, 0 },
 642                 { "rxq",                        1, 0, 0 },
 643                 { "txq",                        1, 0, 0 },
 644                 { "rxd",                        1, 0, 0 },
 645                 { "txd",                        1, 0, 0 },
 646                 { "hairpinq",                   1, 0, 0 },
 647                 { "burst",                      1, 0, 0 },
 648                 { "mbcache",                    1, 0, 0 },
 649                 { "txpt",                       1, 0, 0 },
 650                 { "txht",                       1, 0, 0 },
 651                 { "txwt",                       1, 0, 0 },
 652                 { "txfreet",                    1, 0, 0 },
 653                 { "txrst",                      1, 0, 0 },
 654                 { "rxpt",                       1, 0, 0 },
 655                 { "rxht",                       1, 0, 0 },
 656                 { "rxwt",                       1, 0, 0 },
 657                 { "rxfreet",                    1, 0, 0 },
 658                 { "tx-queue-stats-mapping",     1, 0, 0 },
 659                 { "rx-queue-stats-mapping",     1, 0, 0 },
 660                 { "no-flush-rx",        0, 0, 0 },
 661                 { "flow-isolate-all",           0, 0, 0 },
 662                 { "txpkts",                     1, 0, 0 },
 663                 { "txonly-multi-flow",          0, 0, 0 },
 664                 { "disable-link-check",         0, 0, 0 },
 665                 { "disable-device-start",       0, 0, 0 },
 666                 { "no-lsc-interrupt",           0, 0, 0 },
 667                 { "no-rmv-interrupt",           0, 0, 0 },
 668                 { "print-event",                1, 0, 0 },
 669                 { "mask-event",                 1, 0, 0 },
 670                 { "tx-offloads",                1, 0, 0 },
 671                 { "rx-offloads",                1, 0, 0 },
 672                 { "hot-plug",                   0, 0, 0 },
 673                 { "vxlan-gpe-port",             1, 0, 0 },
 674                 { "mlockall",                   0, 0, 0 },
 675                 { "no-mlockall",                0, 0, 0 },
 676                 { "mp-alloc",                   1, 0, 0 },
 677                 { "tx-ip",                      1, 0, 0 },
 678                 { "tx-udp",                     1, 0, 0 },
 679                 { "noisy-tx-sw-buffer-size",    1, 0, 0 },
 680                 { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
 681                 { "noisy-lkup-memory",          1, 0, 0 },
 682                 { "noisy-lkup-num-writes",      1, 0, 0 },
 683                 { "noisy-lkup-num-reads",       1, 0, 0 },
 684                 { "noisy-lkup-num-reads-writes", 1, 0, 0 },
 685                 { "no-iova-contig",             0, 0, 0 },
 686                 { "rx-mq-mode",                 1, 0, 0 },
 687                 { "record-core-cycles",         0, 0, 0 },
 688                 { "record-burst-stats",         0, 0, 0 },
 689                 { 0, 0, 0, 0 },
 690         };
 691
 692         argvopt = argv;
 693
 694 #ifdef RTE_LIBRTE_CMDLINE
 695 #define SHORTOPTS "i"
 696 #else
 697 #define SHORTOPTS ""
 698 #endif
 699         while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
 700                                  lgopts, &opt_idx)) != EOF) {
 701                 switch (opt) {
 702 #ifdef RTE_LIBRTE_CMDLINE
 703                 case 'i':
 704                         printf("Interactive-mode selected\n");
 705                         interactive = 1;
 706                         break;
 707 #endif
 708                 case 'a':
 709                         printf("Auto-start selected\n");
 710                         auto_start = 1;
 711                         break;
 712
 713                 case 0: /*long options */
 714                         if (!strcmp(lgopts[opt_idx].name, "help")) {
 715                                 usage(argv[0]);
 716                                 rte_exit(EXIT_SUCCESS, "Displayed help\n");
 717                         }
 718 #ifdef RTE_LIBRTE_CMDLINE
 719                         if (!strcmp(lgopts[opt_idx].name, "interactive")) {
 720                                 printf("Interactive-mode selected\n");
 721                                 interactive = 1;
 722                         }
 723                         if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
 724                                 printf("CLI commands to be read from %s\n",
 725                                        optarg);
 726                                 strlcpy(cmdline_filename, optarg,
 727                                         sizeof(cmdline_filename));
 728                         }
 729                         if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
 730                                 printf("Auto-start selected\n");
 731                                 auto_start = 1;
 732                         }
 733                         if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
 734                                 printf("Ports to start sending a burst of "
 735                                                 "packets first\n");
 736                                 tx_first = 1;
 737                         }
 738                         if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
 739                                 char *end = NULL;
 740                                 unsigned int n;
 741
 742                                 n = strtoul(optarg, &end, 10);
 743                                 if ((optarg[0] == '\0') || (end == NULL) ||
 744                                                 (*end != '\0'))
 745                                         break;
 746
 747                                 stats_period = n;
 748                                 break;
 749                         }
 750                         if (!strcmp(lgopts[opt_idx].name,
 751                                     "eth-peers-configfile")) {
 752                                 if (init_peer_eth_addrs(optarg) != 0)
 753                                         rte_exit(EXIT_FAILURE,
 754                                                  "Cannot open logfile\n");
 755                         }
 756                         if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
 757                                 char *port_end;
 758
 759                                 errno = 0;
 760                                 n = strtoul(optarg, &port_end, 10);
 761                                 if (errno != 0 || port_end == optarg || *port_end++ != ',')
 762                                         rte_exit(EXIT_FAILURE,
 763                                                  "Invalid eth-peer: %s", optarg);
 764                                 if (n >= RTE_MAX_ETHPORTS)
 765                                         rte_exit(EXIT_FAILURE,
 766                                                  "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
 767                                                  n, RTE_MAX_ETHPORTS);
 768
 769                                 if (rte_ether_unformat_addr(port_end,
 770                                                 &peer_eth_addrs[n]) < 0)
 771                                         rte_exit(EXIT_FAILURE,
 772                                                  "Invalid ethernet address: %s\n",
 773                                                  port_end);
 774                                 nb_peer_eth_addrs++;
 775                         }
 776 #endif
 777                         if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
 778                                 struct in_addr in;
 779                                 char *end;
 780
 781                                 end = strchr(optarg, ',');
 782                                 if (end == optarg || !end)
 783                                         rte_exit(EXIT_FAILURE,
 784                                                  "Invalid tx-ip: %s", optarg);
 785
 786                                 *end++ = 0;
 787                                 if (inet_aton(optarg, &in) == 0)
 788                                         rte_exit(EXIT_FAILURE,
 789                                                  "Invalid source IP address: %s\n",
 790                                                  optarg);
 791                                 tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
 792
 793                                 if (inet_aton(end, &in) == 0)
 794                                         rte_exit(EXIT_FAILURE,
 795                                                  "Invalid destination IP address: %s\n",
 796                                                  optarg);
 797                                 tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
 798                         }
 799                         if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
 800                                 char *end = NULL;
 801
 802                                 errno = 0;
 803                                 n = strtoul(optarg, &end, 10);
 804                                 if (errno != 0 || end == optarg ||
 805                                     n > UINT16_MAX ||
 806                                     !(*end == '\0' || *end == ','))
 807                                         rte_exit(EXIT_FAILURE,
 808                                                  "Invalid UDP port: %s\n",
 809                                                  optarg);
 810                                 tx_udp_src_port = n;
 811                                 if (*end == ',') {
 812                                         char *dst = end + 1;
 813
 814                                         n = strtoul(dst, &end, 10);
 815                                         if (errno != 0 || end == dst ||
 816                                             n > UINT16_MAX || *end)
 817                                                 rte_exit(EXIT_FAILURE,
 818                                                          "Invalid destination UDP port: %s\n",
 819                                                          dst);
 820                                         tx_udp_dst_port = n;
 821                                 } else {
 822                                         tx_udp_dst_port = n;
 823                                 }
 824
 825                         }
 826                         if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
 827                                 n = atoi(optarg);
 828                                 if (n > 0 && n <= nb_ports)
 829                                         nb_fwd_ports = n;
 830                                 else
 831                                         rte_exit(EXIT_FAILURE,
 832                                                  "Invalid port %d\n", n);
 833                         }
 834                         if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
 835                                 n = atoi(optarg);
 836                                 if (n > 0 && n <= nb_lcores)
 837                                         nb_fwd_lcores = (uint8_t) n;
 838                                 else
 839                                         rte_exit(EXIT_FAILURE,
 840                                                  "nb-cores should be > 0 and <= %d\n",
 841                                                  nb_lcores);
 842                         }
 843                         if (!strcmp(lgopts[opt_idx].name, "coremask"))
 844                                 parse_fwd_coremask(optarg);
 845                         if (!strcmp(lgopts[opt_idx].name, "portmask"))
 846                                 parse_fwd_portmask(optarg);
 847                         if (!strcmp(lgopts[opt_idx].name, "portlist"))
 848                                 parse_fwd_portlist(optarg);
 849                         if (!strcmp(lgopts[opt_idx].name, "no-numa"))
 850                                 numa_support = 0;
 851                         if (!strcmp(lgopts[opt_idx].name, "numa"))
 852                                 numa_support = 1;
 853                         if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
 854                                 mp_alloc_type = MP_ALLOC_ANON;
 855                         }
 856                         if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
 857                                 if (!strcmp(optarg, "native"))
 858                                         mp_alloc_type = MP_ALLOC_NATIVE;
 859                                 else if (!strcmp(optarg, "anon"))
 860                                         mp_alloc_type = MP_ALLOC_ANON;
 861                                 else if (!strcmp(optarg, "xmem"))
 862                                         mp_alloc_type = MP_ALLOC_XMEM;
 863                                 else if (!strcmp(optarg, "xmemhuge"))
 864                                         mp_alloc_type = MP_ALLOC_XMEM_HUGE;
 865                                 else if (!strcmp(optarg, "xbuf"))
 866                                         mp_alloc_type = MP_ALLOC_XBUF;
 867                                 else
 868                                         rte_exit(EXIT_FAILURE,
 869                                                 "mp-alloc %s invalid - must be: "
 870                                                 "native, anon, xmem or xmemhuge\n",
 871                                                  optarg);
 872                         }
 873                         if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
 874                                 if (parse_portnuma_config(optarg))
 875                                         rte_exit(EXIT_FAILURE,
 876                                            "invalid port-numa configuration\n");
 877                         }
 878                         if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
 879                                 if (parse_ringnuma_config(optarg))
 880                                         rte_exit(EXIT_FAILURE,
 881                                            "invalid ring-numa configuration\n");
 882                         if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
 883                                 n = atoi(optarg);
 884                                 if (!new_socket_id((uint8_t)n)) {
 885                                         socket_num = (uint8_t)n;
 886                                 } else {
 887                                         print_invalid_socket_id_error();
 888                                         rte_exit(EXIT_FAILURE,
 889                                                 "Invalid socket id");
 890                                 }
 891                         }
 892                         if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
 893                                 n = atoi(optarg);
 894                                 if (n > 0 && n <= 0xFFFF)
 895                                         mbuf_data_size = (uint16_t) n;
 896                                 else
 897                                         rte_exit(EXIT_FAILURE,
 898                                                  "mbuf-size should be > 0 and < 65536\n");
 899                         }
 900                         if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
 901                                 n = atoi(optarg);
 902                                 if (n > 1024)
 903                                         param_total_num_mbufs = (unsigned)n;
 904                                 else
 905                                         rte_exit(EXIT_FAILURE,
 906                                                  "total-num-mbufs should be > 1024\n");
 907                         }
 908                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
 909                                 n = atoi(optarg);
 910                                 if (n >= RTE_ETHER_MIN_LEN) {
 911                                         rx_mode.max_rx_pkt_len = (uint32_t) n;
 912                                         if (n > RTE_ETHER_MAX_LEN)
 913                                                 rx_offloads |=
 914                                                         DEV_RX_OFFLOAD_JUMBO_FRAME;
 915                                 } else
 916                                         rte_exit(EXIT_FAILURE,
 917                                                  "Invalid max-pkt-len=%d - should be > %d\n",
 918                                                  n, RTE_ETHER_MIN_LEN);
 919                         }
 920                         if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
 921                                 n = atoi(optarg);
 922                                 rx_mode.max_lro_pkt_size = (uint32_t) n;
 923                         }
 924                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
 925                                 if (!strcmp(optarg, "signature"))
 926                                         fdir_conf.mode =
 927                                                 RTE_FDIR_MODE_SIGNATURE;
 928                                 else if (!strcmp(optarg, "perfect"))
 929                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
 930                                 else if (!strcmp(optarg, "perfect-mac-vlan"))
 931                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
 932                                 else if (!strcmp(optarg, "perfect-tunnel"))
 933                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
 934                                 else if (!strcmp(optarg, "none"))
 935                                         fdir_conf.mode = RTE_FDIR_MODE_NONE;
 936                                 else
 937                                         rte_exit(EXIT_FAILURE,
 938                                                  "pkt-mode-invalid %s invalid - must be: "
 939                                                  "none, signature, perfect, perfect-mac-vlan"
 940                                                  " or perfect-tunnel\n",
 941                                                  optarg);
 942                         }
 943                         if (!strcmp(lgopts[opt_idx].name,
 944                                     "pkt-filter-report-hash")) {
 945                                 if (!strcmp(optarg, "none"))
 946                                         fdir_conf.status =
 947                                                 RTE_FDIR_NO_REPORT_STATUS;
 948                                 else if (!strcmp(optarg, "match"))
 949                                         fdir_conf.status =
 950                                                 RTE_FDIR_REPORT_STATUS;
 951                                 else if (!strcmp(optarg, "always"))
 952                                         fdir_conf.status =
 953                                                 RTE_FDIR_REPORT_STATUS_ALWAYS;
 954                                 else
 955                                         rte_exit(EXIT_FAILURE,
 956                                                  "pkt-filter-report-hash %s invalid "
 957                                                  "- must be: none or match or always\n",
 958                                                  optarg);
 959                         }
 960                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
 961                                 if (!strcmp(optarg, "64K"))
 962                                         fdir_conf.pballoc =
 963                                                 RTE_FDIR_PBALLOC_64K;
 964                                 else if (!strcmp(optarg, "128K"))
 965                                         fdir_conf.pballoc =
 966                                                 RTE_FDIR_PBALLOC_128K;
 967                                 else if (!strcmp(optarg, "256K"))
 968                                         fdir_conf.pballoc =
 969                                                 RTE_FDIR_PBALLOC_256K;
 970                                 else
 971                                         rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
 972                                                  " must be: 64K or 128K or 256K\n",
 973                                                  optarg);
 974                         }
 975                         if (!strcmp(lgopts[opt_idx].name,
 976                                     "pkt-filter-drop-queue")) {
 977                                 n = atoi(optarg);
 978                                 if (n >= 0)
 979                                         fdir_conf.drop_queue = (uint8_t) n;
 980                                 else
 981                                         rte_exit(EXIT_FAILURE,
 982                                                  "drop queue %d invalid - must"
 983                                                  "be >= 0 \n", n);
 984                         }
 985 #ifdef RTE_LIBRTE_LATENCY_STATS
 986                         if (!strcmp(lgopts[opt_idx].name,
 987                                     "latencystats")) {
 988                                 n = atoi(optarg);
 989                                 if (n >= 0) {
 990                                         latencystats_lcore_id = (lcoreid_t) n;
 991                                         latencystats_enabled = 1;
 992                                 } else
 993                                         rte_exit(EXIT_FAILURE,
 994                                                  "invalid lcore id %d for latencystats"
 995                                                  " must be >= 0\n", n);
 996                         }
 997 #endif
 998 #ifdef RTE_LIBRTE_BITRATESTATS
 999                         if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
1000                                 n = atoi(optarg);
1001                                 if (n >= 0) {
1002                                         bitrate_lcore_id = (lcoreid_t) n;
1003                                         bitrate_enabled = 1;
1004                                 } else
1005                                         rte_exit(EXIT_FAILURE,
1006                                                  "invalid lcore id %d for bitrate stats"
1007                                                  " must be >= 0\n", n);
1008                         }
1009 #endif
1010                         if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
1011                                 rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
1012                         if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
1013                                 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
1014                         if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
1015                                 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
1016                         if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
1017                                 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
1018                         if (!strcmp(lgopts[opt_idx].name,
1019                                         "enable-rx-timestamp"))
1020                                 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
1021                         if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
1022                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN;
1023
1024                         if (!strcmp(lgopts[opt_idx].name,
1025                                         "enable-hw-vlan-filter"))
1026                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
1027
1028                         if (!strcmp(lgopts[opt_idx].name,
1029                                         "enable-hw-vlan-strip"))
1030                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
1031
1032                         if (!strcmp(lgopts[opt_idx].name,
1033                                         "enable-hw-vlan-extend"))
1034                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
1035
1036                         if (!strcmp(lgopts[opt_idx].name,
1037                                         "enable-hw-qinq-strip"))
1038                                 rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
1039
1040                         if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
1041                                 rx_drop_en = 1;
1042
1043                         if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
1044                                 rss_hf = 0;
1045                         if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
1046                                 if (!strcmp(optarg, "paired"))
1047                                         port_topology = PORT_TOPOLOGY_PAIRED;
1048                                 else if (!strcmp(optarg, "chained"))
1049                                         port_topology = PORT_TOPOLOGY_CHAINED;
1050                                 else if (!strcmp(optarg, "loop"))
1051                                         port_topology = PORT_TOPOLOGY_LOOP;
1052                                 else
1053                                         rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
1054                                                  " must be: paired, chained or loop\n",
1055                                                  optarg);
1056                         }
1057                         if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
1058                                 set_pkt_forwarding_mode(optarg);
1059                         if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
1060                                 rss_hf = ETH_RSS_IP;
1061                         if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
1062                                 rss_hf = ETH_RSS_UDP;
1063                         if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
1064                                 rss_hf |= ETH_RSS_LEVEL_INNERMOST;
1065                         if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
1066                                 rss_hf |= ETH_RSS_LEVEL_OUTERMOST;
1067                         if (!strcmp(lgopts[opt_idx].name, "rxq")) {
1068                                 n = atoi(optarg);
1069                                 if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
1070                                         nb_rxq = (queueid_t) n;
1071                                 else
1072                                         rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
1073                                                   " >= 0 && <= %u\n", n,
1074                                                   get_allowed_max_nb_rxq(&pid));
1075                         }
1076                         if (!strcmp(lgopts[opt_idx].name, "txq")) {
1077                                 n = atoi(optarg);
1078                                 if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
1079                                         nb_txq = (queueid_t) n;
1080                                 else
1081                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1082                                                   " >= 0 && <= %u\n", n,
1083                                                   get_allowed_max_nb_txq(&pid));
1084                         }
1085                         if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
1086                                 n = atoi(optarg);
1087                                 if (n >= 0 &&
1088                                     check_nb_hairpinq((queueid_t)n) == 0)
1089                                         nb_hairpinq = (queueid_t) n;
1090                                 else
1091                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1092                                                   " >= 0 && <= %u\n", n,
1093                                                   get_allowed_max_nb_hairpinq
1094                                                   (&pid));
1095                                 if ((n + nb_txq) < 0 ||
1096                                     check_nb_txq((queueid_t)(n + nb_txq)) != 0)
1097                                         rte_exit(EXIT_FAILURE, "txq + hairpinq "
1098                                                  "%d invalid - must be"
1099                                                   " >= 0 && <= %u\n",
1100                                                   n + nb_txq,
1101                                                   get_allowed_max_nb_txq(&pid));
1102                                 if ((n + nb_rxq) < 0 ||
1103                                     check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
1104                                         rte_exit(EXIT_FAILURE, "rxq + hairpinq "
1105                                                  "%d invalid - must be"
1106                                                   " >= 0 && <= %u\n",
1107                                                   n + nb_rxq,
1108                                                   get_allowed_max_nb_rxq(&pid));
1109                         }
1110                         if (!nb_rxq && !nb_txq) {
1111                                 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
1112                                                 "be non-zero\n");
1113                         }
1114                         if (!strcmp(lgopts[opt_idx].name, "burst")) {
1115                                 n = atoi(optarg);
1116                                 if (n == 0) {
1117                                         /* A burst size of zero means that the
1118                                          * PMD should be queried for
1119                                          * recommended Rx burst size. Since
1120                                          * testpmd uses a single size for all
1121                                          * ports, port 0 is queried for the
1122                                          * value, on the assumption that all
1123                                          * ports are of the same NIC model.
1124                                          */
1125                                         ret = eth_dev_info_get_print_err(
1126                                                                 0,
1127                                                                 &dev_info);
1128                                         if (ret != 0)
1129                                                 return;
1130
1131                                         rec_nb_pkts = dev_info
1132                                                 .default_rxportconf.burst_size;
1133
1134                                         if (rec_nb_pkts == 0)
1135                                                 rte_exit(EXIT_FAILURE,
1136                                                         "PMD does not recommend a burst size. "
1137                                                         "Provided value must be between "
1138                                                         "1 and %d\n", MAX_PKT_BURST);
1139                                         else if (rec_nb_pkts > MAX_PKT_BURST)
1140                                                 rte_exit(EXIT_FAILURE,
1141                                                         "PMD recommended burst size of %d"
1142                                                         " exceeds maximum value of %d\n",
1143                                                         rec_nb_pkts, MAX_PKT_BURST);
1144                                         printf("Using PMD-provided burst value of %d\n",
1145                                                 rec_nb_pkts);
1146                                         nb_pkt_per_burst = rec_nb_pkts;
1147                                 } else if (n > MAX_PKT_BURST)
1148                                         rte_exit(EXIT_FAILURE,
1149                                                 "burst must be between1 and %d\n",
1150                                                 MAX_PKT_BURST);
1151                                 else
1152                                         nb_pkt_per_burst = (uint16_t) n;
1153                         }
1154                         if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
1155                                 n = atoi(optarg);
1156                                 if ((n >= 0) &&
1157                                     (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
1158                                         mb_mempool_cache = (uint16_t) n;
1159                                 else
1160                                         rte_exit(EXIT_FAILURE,
1161                                                  "mbcache must be >= 0 and <= %d\n",
1162                                                  RTE_MEMPOOL_CACHE_MAX_SIZE);
1163                         }
1164                         if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
1165                                 n = atoi(optarg);
1166                                 if (n >= 0)
1167                                         tx_free_thresh = (int16_t)n;
1168                                 else
1169                                         rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
1170                         }
1171                         if (!strcmp(lgopts[opt_idx].name, "txrst")) {
1172                                 n = atoi(optarg);
1173                                 if (n >= 0)
1174                                         tx_rs_thresh = (int16_t)n;
1175                                 else
1176                                         rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
1177                         }
1178                         if (!strcmp(lgopts[opt_idx].name, "rxd")) {
1179                                 n = atoi(optarg);
1180                                 if (n > 0) {
1181                                         if (rx_free_thresh >= n)
1182                                                 rte_exit(EXIT_FAILURE,
1183                                                          "rxd must be > "
1184                                                          "rx_free_thresh(%d)\n",
1185                                                          (int)rx_free_thresh);
1186                                         else
1187                                                 nb_rxd = (uint16_t) n;
1188                                 } else
1189                                         rte_exit(EXIT_FAILURE,
1190                                                  "rxd(%d) invalid - must be > 0\n",
1191                                                  n);
1192                         }
1193                         if (!strcmp(lgopts[opt_idx].name, "txd")) {
1194                                 n = atoi(optarg);
1195                                 if (n > 0)
1196                                         nb_txd = (uint16_t) n;
1197                                 else
1198                                         rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1199                         }
1200                         if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1201                                 n = atoi(optarg);
1202                                 if (n >= 0)
1203                                         tx_pthresh = (int8_t)n;
1204                                 else
1205                                         rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1206                         }
1207                         if (!strcmp(lgopts[opt_idx].name, "txht")) {
1208                                 n = atoi(optarg);
1209                                 if (n >= 0)
1210                                         tx_hthresh = (int8_t)n;
1211                                 else
1212                                         rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1213                         }
1214                         if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1215                                 n = atoi(optarg);
1216                                 if (n >= 0)
1217                                         tx_wthresh = (int8_t)n;
1218                                 else
1219                                         rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1220                         }
1221                         if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1222                                 n = atoi(optarg);
1223                                 if (n >= 0)
1224                                         rx_pthresh = (int8_t)n;
1225                                 else
1226                                         rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1227                         }
1228                         if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1229                                 n = atoi(optarg);
1230                                 if (n >= 0)
1231                                         rx_hthresh = (int8_t)n;
1232                                 else
1233                                         rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1234                         }
1235                         if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1236                                 n = atoi(optarg);
1237                                 if (n >= 0)
1238                                         rx_wthresh = (int8_t)n;
1239                                 else
1240                                         rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1241                         }
1242                         if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1243                                 n = atoi(optarg);
1244                                 if (n >= 0)
1245                                         rx_free_thresh = (int16_t)n;
1246                                 else
1247                                         rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1248                         }
1249                         if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
1250                                 if (parse_queue_stats_mapping_config(optarg, TX)) {
1251                                         rte_exit(EXIT_FAILURE,
1252                                                  "invalid TX queue statistics mapping config entered\n");
1253                                 }
1254                         }
1255                         if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
1256                                 if (parse_queue_stats_mapping_config(optarg, RX)) {
1257                                         rte_exit(EXIT_FAILURE,
1258                                                  "invalid RX queue statistics mapping config entered\n");
1259                                 }
1260                         }
1261                         if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1262                                 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1263                                 unsigned int nb_segs;
1264
1265                                 nb_segs = parse_item_list(optarg, "txpkt segments",
1266                                                 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1267                                 if (nb_segs > 0)
1268                                         set_tx_pkt_segments(seg_lengths, nb_segs);
1269                                 else
1270                                         rte_exit(EXIT_FAILURE, "bad txpkts\n");
1271                         }
1272                         if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
1273                                 txonly_multi_flow = 1;
1274                         if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1275                                 no_flush_rx = 1;
1276                         if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1277                                 no_link_check = 1;
1278                         if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
1279                                 no_device_start = 1;
1280                         if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1281                                 lsc_interrupt = 0;
1282                         if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1283                                 rmv_interrupt = 0;
1284                         if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1285                                 flow_isolate_all = 1;
1286                         if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1287                                 char *end = NULL;
1288                                 n = strtoull(optarg, &end, 16);
1289                                 if (n >= 0)
1290                                         tx_offloads = (uint64_t)n;
1291                                 else
1292                                         rte_exit(EXIT_FAILURE,
1293                                                  "tx-offloads must be >= 0\n");
1294                         }
1295
1296                         if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
1297                                 char *end = NULL;
1298                                 n = strtoull(optarg, &end, 16);
1299                                 if (n >= 0)
1300                                         rx_offloads = (uint64_t)n;
1301                                 else
1302                                         rte_exit(EXIT_FAILURE,
1303                                                  "rx-offloads must be >= 0\n");
1304                         }
1305
1306                         if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
1307                                 n = atoi(optarg);
1308                                 if (n >= 0)
1309                                         vxlan_gpe_udp_port = (uint16_t)n;
1310                                 else
1311                                         rte_exit(EXIT_FAILURE,
1312                                                  "vxlan-gpe-port must be >= 0\n");
1313                         }
1314                         if (!strcmp(lgopts[opt_idx].name, "print-event"))
1315                                 if (parse_event_printing_config(optarg, 1)) {
1316                                         rte_exit(EXIT_FAILURE,
1317                                                  "invalid print-event argument\n");
1318                                 }
1319                         if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1320                                 if (parse_event_printing_config(optarg, 0)) {
1321                                         rte_exit(EXIT_FAILURE,
1322                                                  "invalid mask-event argument\n");
1323                                 }
1324                         if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
1325                                 hot_plug = 1;
1326                         if (!strcmp(lgopts[opt_idx].name, "mlockall"))
1327                                 do_mlockall = 1;
1328                         if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
1329                                 do_mlockall = 0;
1330                         if (!strcmp(lgopts[opt_idx].name,
1331                                     "noisy-tx-sw-buffer-size")) {
1332                                 n = atoi(optarg);
1333                                 if (n >= 0)
1334                                         noisy_tx_sw_bufsz = n;
1335                                 else
1336                                         rte_exit(EXIT_FAILURE,
1337                                                 "noisy-tx-sw-buffer-size must be >= 0\n");
1338                         }
1339                         if (!strcmp(lgopts[opt_idx].name,
1340                                     "noisy-tx-sw-buffer-flushtime")) {
1341                                 n = atoi(optarg);
1342                                 if (n >= 0)
1343                                         noisy_tx_sw_buf_flush_time = n;
1344                                 else
1345                                         rte_exit(EXIT_FAILURE,
1346                                                  "noisy-tx-sw-buffer-flushtime must be >= 0\n");
1347                         }
1348                         if (!strcmp(lgopts[opt_idx].name,
1349                                     "noisy-lkup-memory")) {
1350                                 n = atoi(optarg);
1351                                 if (n >= 0)
1352                                         noisy_lkup_mem_sz = n;
1353                                 else
1354                                         rte_exit(EXIT_FAILURE,
1355                                                  "noisy-lkup-memory must be >= 0\n");
1356                         }
1357                         if (!strcmp(lgopts[opt_idx].name,
1358                                     "noisy-lkup-num-writes")) {
1359                                 n = atoi(optarg);
1360                                 if (n >= 0)
1361                                         noisy_lkup_num_writes = n;
1362                                 else
1363                                         rte_exit(EXIT_FAILURE,
1364                                                  "noisy-lkup-num-writes must be >= 0\n");
1365                         }
1366                         if (!strcmp(lgopts[opt_idx].name,
1367                                     "noisy-lkup-num-reads")) {
1368                                 n = atoi(optarg);
1369                                 if (n >= 0)
1370                                         noisy_lkup_num_reads = n;
1371                                 else
1372                                         rte_exit(EXIT_FAILURE,
1373                                                  "noisy-lkup-num-reads must be >= 0\n");
1374                         }
1375                         if (!strcmp(lgopts[opt_idx].name,
1376                                     "noisy-lkup-num-reads-writes")) {
1377                                 n = atoi(optarg);
1378                                 if (n >= 0)
1379                                         noisy_lkup_num_reads_writes = n;
1380                                 else
1381                                         rte_exit(EXIT_FAILURE,
1382                                                  "noisy-lkup-num-reads-writes must be >= 0\n");
1383                         }
1384                         if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
1385                                 mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
1386
1387                         if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
1388                                 char *end = NULL;
1389                                 n = strtoul(optarg, &end, 16);
1390                                 if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS)
1391                                         rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
1392                                 else
1393                                         rte_exit(EXIT_FAILURE,
1394                                                  "rx-mq-mode must be >= 0 and <= %d\n",
1395                                                  ETH_MQ_RX_VMDQ_DCB_RSS);
1396                         }
1397                         if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
1398                                 record_core_cycles = 1;
1399                         if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
1400                                 record_burst_stats = 1;
1401                         break;
1402                 case 'h':
1403                         usage(argv[0]);
1404                         rte_exit(EXIT_SUCCESS, "Displayed help\n");
1405                         break;
1406                 default:
1407                         usage(argv[0]);
1408                         printf("Invalid option: %s\n", argv[optind]);
1409                         rte_exit(EXIT_FAILURE,
1410                                  "Command line is incomplete or incorrect\n");
1411                         break;
1412                 }
1413         }
1414
1415         if (optind != argc) {
1416                 usage(argv[0]);
1417                 printf("Invalid parameter: %s\n", argv[optind]);
1418                 rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
1419         }
1420
1421         /* Set offload configuration from command line parameters. */
1422         rx_mode.offloads = rx_offloads;
1423         tx_mode.offloads = tx_offloads;
1424
1425         if (mempool_flags & MEMPOOL_F_NO_IOVA_CONTIG &&
1426             mp_alloc_type != MP_ALLOC_ANON) {
1427                 TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
1428                                   "mp-alloc=anon. mempool no-iova-contig is "
1429                                   "ignored\n");
1430                 mempool_flags = 0;
1431         }
1432 }