[dpdk.git] / app / test-pmd / testpmd.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2017 Intel Corporation
 */

#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <signal.h>
#include <string.h>
#include <time.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
#include <stdbool.h>

#include <sys/queue.h>
#include <sys/stat.h>

#include <stdint.h>
#include <unistd.h>
#include <inttypes.h>

#include <rte_common.h>
#include <rte_errno.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
#ifdef RTE_NET_IXGBE
#include <rte_pmd_ixgbe.h>
#endif
#ifdef RTE_LIB_PDUMP
#include <rte_pdump.h>
#endif
#include <rte_flow.h>
#include <rte_metrics.h>
#ifdef RTE_LIB_BITRATESTATS
#include <rte_bitrate.h>
#endif
#ifdef RTE_LIB_LATENCYSTATS
#include <rte_latencystats.h>
#endif

#include "testpmd.h"

#ifndef MAP_HUGETLB
/* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */
#define HUGE_FLAG (0x40000)
#else
#define HUGE_FLAG MAP_HUGETLB
#endif

#ifndef MAP_HUGE_SHIFT
/* older kernels (or FreeBSD) will not have this define */
#define HUGE_SHIFT (26)
#else
#define HUGE_SHIFT MAP_HUGE_SHIFT
#endif

#define EXTMEM_HEAP_NAME "extmem"
#define EXTBUF_ZONE_SIZE RTE_PGSIZE_2M

uint16_t verbose_level = 0; /**< Silent by default. */
int testpmd_logtype; /**< Log type for testpmd logs */

/* use main core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
uint8_t tx_first;
char cmdline_filename[PATH_MAX] = {0};

/*
 * NUMA support configuration.
 * When set, the NUMA support attempts to dispatch the allocation of the
 * RX and TX memory rings, and of the DMA memory buffers (mbufs) for the
 * probed ports among the CPU sockets 0 and 1.
 * Otherwise, all memory is allocated from CPU socket 0.
 */
uint8_t numa_support = 1; /**< numa enabled by default */

/*
 * In UMA mode,all memory is allocated from socket 0 if --socket-num is
 * not configured.
 */
uint8_t socket_num = UMA_NO_CONFIG;

/*
 * Select mempool allocation type:
 * - native: use regular DPDK memory
 * - anon: use regular DPDK memory to create mempool, but populate using
 *         anonymous memory (may not be IOVA-contiguous)
 * - xmem: use externally allocated hugepage memory
 */
uint8_t mp_alloc_type = MP_ALLOC_NATIVE;

/*
 * Store specified sockets on which memory pool to be used by ports
 * is allocated.
 */
uint8_t port_numa[RTE_MAX_ETHPORTS];

/*
 * Store specified sockets on which RX ring to be used by ports
 * is allocated.
 */
uint8_t rxring_numa[RTE_MAX_ETHPORTS];

/*
 * Store specified sockets on which TX ring to be used by ports
 * is allocated.
 */
uint8_t txring_numa[RTE_MAX_ETHPORTS];

/*
 * Record the Ethernet address of peer target ports to which packets are
 * forwarded.
 * Must be instantiated with the ethernet addresses of peer traffic generator
 * ports.
 */
struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
portid_t nb_peer_eth_addrs = 0;

/*
 * Probed Target Environment.
 */
struct rte_port *ports;        /**< For all probed ethernet ports. */
portid_t nb_ports;             /**< Number of probed ethernet ports. */
struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
lcoreid_t nb_lcores;           /**< Number of probed logical cores. */

portid_t ports_ids[RTE_MAX_ETHPORTS]; /**< Store all port ids. */

/*
 * Test Forwarding Configuration.
 *    nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
 *    nb_fwd_ports  <= nb_cfg_ports  <= nb_ports
 */
lcoreid_t nb_cfg_lcores; /**< Number of configured logical cores. */
lcoreid_t nb_fwd_lcores; /**< Number of forwarding logical cores. */
portid_t  nb_cfg_ports;  /**< Number of configured ports. */
portid_t  nb_fwd_ports;  /**< Number of forwarding ports. */

unsigned int fwd_lcores_cpuids[RTE_MAX_LCORE]; /**< CPU ids configuration. */
portid_t fwd_ports_ids[RTE_MAX_ETHPORTS];      /**< Port ids configuration. */

struct fwd_stream **fwd_streams; /**< For each RX queue of each port. */
streamid_t nb_fwd_streams;       /**< Is equal to (nb_ports * nb_rxq). */

/*
 * Forwarding engines.
 */
struct fwd_engine * fwd_engines[] = {
        &io_fwd_engine,
        &mac_fwd_engine,
        &mac_swap_engine,
        &flow_gen_engine,
        &rx_only_engine,
        &tx_only_engine,
        &csum_fwd_engine,
        &icmp_echo_engine,
        &noisy_vnf_engine,
        &five_tuple_swap_fwd_engine,
#ifdef RTE_LIBRTE_IEEE1588
        &ieee1588_fwd_engine,
#endif
        NULL,
};

struct rte_mempool *mempools[RTE_MAX_NUMA_NODES * MAX_SEGS_BUFFER_SPLIT];
uint16_t mempool_flags;

struct fwd_config cur_fwd_config;
struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */
uint32_t retry_enabled;
uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
uint32_t burst_tx_retry_num = BURST_TX_RETRIES;

uint32_t mbuf_data_size_n = 1; /* Number of specified mbuf sizes. */
uint16_t mbuf_data_size[MAX_SEGS_BUFFER_SPLIT] = {
        DEFAULT_MBUF_DATA_SIZE
}; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0;  /**< number of mbufs in all pools - if
                                      * specified on command-line. */
uint16_t stats_period; /**< Period to show statistics (disabled by default) */

/*
 * In container, it cannot terminate the process which running with 'stats-period'
 * option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
 */
uint8_t f_quit;

/*
 * Configuration of packet segments used to scatter received packets
 * if some of split features is configured.
 */
uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
uint8_t  rx_pkt_nb_segs; /**< Number of segments to split */
uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
uint8_t  rx_pkt_nb_offs; /**< Number of specified offsets */

/*
 * Configuration of packet segments used by the "txonly" processing engine.
 */
uint16_t tx_pkt_length = TXONLY_DEF_PACKET_LEN; /**< TXONLY packet length. */
uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = {
        TXONLY_DEF_PACKET_LEN,
};
uint8_t  tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */

enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
/**< Split policy for packets to TX. */

uint8_t txonly_multi_flow;
/**< Whether multiple flows are generated in TXONLY mode. */

uint32_t tx_pkt_times_inter;
/**< Timings for send scheduling in TXONLY mode, time between bursts. */

uint32_t tx_pkt_times_intra;
/**< Timings for send scheduling in TXONLY mode, time between packets. */

uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */

/* current configuration is in DCB or not,0 means it is not in DCB mode */
uint8_t dcb_config = 0;

/* Whether the dcb is in testing status */
uint8_t dcb_test = 0;

/*
 * Configurable number of RX/TX queues.
 */
queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
queueid_t nb_txq = 1; /**< Number of TX queues per port. */

/*
 * Configurable number of RX/TX ring descriptors.
 * Defaults are supplied by drivers via ethdev.
 */
#define RTE_TEST_RX_DESC_DEFAULT 0
#define RTE_TEST_TX_DESC_DEFAULT 0
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */

#define RTE_PMD_PARAM_UNSET -1
/*
 * Configurable values of RX and TX ring threshold registers.
 */

int8_t rx_pthresh = RTE_PMD_PARAM_UNSET;
int8_t rx_hthresh = RTE_PMD_PARAM_UNSET;
int8_t rx_wthresh = RTE_PMD_PARAM_UNSET;

int8_t tx_pthresh = RTE_PMD_PARAM_UNSET;
int8_t tx_hthresh = RTE_PMD_PARAM_UNSET;
int8_t tx_wthresh = RTE_PMD_PARAM_UNSET;

/*
 * Configurable value of RX free threshold.
 */
int16_t rx_free_thresh = RTE_PMD_PARAM_UNSET;

/*
 * Configurable value of RX drop enable.
 */
int8_t rx_drop_en = RTE_PMD_PARAM_UNSET;

/*
 * Configurable value of TX free threshold.
 */
int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET;

/*
 * Configurable value of TX RS bit threshold.
 */
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;

/*
 * Configurable value of buffered packets before sending.
 */
uint16_t noisy_tx_sw_bufsz;

/*
 * Configurable value of packet buffer timeout.
 */
uint16_t noisy_tx_sw_buf_flush_time;

/*
 * Configurable value for size of VNF internal memory area
 * used for simulating noisy neighbour behaviour
 */
uint64_t noisy_lkup_mem_sz;

/*
 * Configurable value of number of random writes done in
 * VNF simulation memory area.
 */
uint64_t noisy_lkup_num_writes;

/*
 * Configurable value of number of random reads done in
 * VNF simulation memory area.
 */
uint64_t noisy_lkup_num_reads;

/*
 * Configurable value of number of random reads/writes done in
 * VNF simulation memory area.
 */
uint64_t noisy_lkup_num_reads_writes;

/*
 * Receive Side Scaling (RSS) configuration.
 */
uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */

/*
 * Port topology configuration
 */
uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */

/*
 * Avoids to flush all the RX streams before starts forwarding.
 */
uint8_t no_flush_rx = 0; /* flush by default */

/*
 * Flow API isolated mode.
 */
uint8_t flow_isolate_all;

/*
 * Avoids to check link status when starting/stopping a port.
 */
uint8_t no_link_check = 0; /* check by default */

/*
 * Don't automatically start all ports in interactive mode.
 */
uint8_t no_device_start = 0;

/*
 * Enable link status change notification
 */
uint8_t lsc_interrupt = 1; /* enabled by default */

/*
 * Enable device removal notification.
 */
uint8_t rmv_interrupt = 1; /* enabled by default */

uint8_t hot_plug = 0; /**< hotplug disabled by default. */

/* After attach, port setup is called on event or by iterator */
bool setup_on_probe_event = true;

/* Clear ptypes on port initialization. */
uint8_t clear_ptypes = true;

/* Hairpin ports configuration mode. */
uint16_t hairpin_mode;

/* Pretty printing of ethdev events */
static const char * const eth_event_desc[] = {
        [RTE_ETH_EVENT_UNKNOWN] = "unknown",
        [RTE_ETH_EVENT_INTR_LSC] = "link state change",
        [RTE_ETH_EVENT_QUEUE_STATE] = "queue state",
        [RTE_ETH_EVENT_INTR_RESET] = "reset",
        [RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
        [RTE_ETH_EVENT_IPSEC] = "IPsec",
        [RTE_ETH_EVENT_MACSEC] = "MACsec",
        [RTE_ETH_EVENT_INTR_RMV] = "device removal",
        [RTE_ETH_EVENT_NEW] = "device probed",
        [RTE_ETH_EVENT_DESTROY] = "device released",
        [RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
        [RTE_ETH_EVENT_MAX] = NULL,
};

/*
 * Display or mask ether events
 * Default to all events except VF_MBOX
 */
uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
                            (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
                            (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
                            (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
                            (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
                            (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
                            (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
                            (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED);
/*
 * Decide if all memory are locked for performance.
 */
int do_mlockall = 0;

/*
 * NIC bypass mode configuration options.
 */

#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif


#ifdef RTE_LIB_LATENCYSTATS

/*
 * Set when latency stats is enabled in the commandline
 */
uint8_t latencystats_enabled;

/*
 * Lcore ID to serive latency statistics.
 */
lcoreid_t latencystats_lcore_id = -1;

#endif

/*
 * Ethernet device configuration.
 */
struct rte_eth_rxmode rx_mode = {
        .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
                /**< Default maximum frame length. */
};

struct rte_eth_txmode tx_mode = {
        .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
};

struct rte_fdir_conf fdir_conf = {
        .mode = RTE_FDIR_MODE_NONE,
        .pballoc = RTE_FDIR_PBALLOC_64K,
        .status = RTE_FDIR_REPORT_STATUS,
        .mask = {
                .vlan_tci_mask = 0xFFEF,
                .ipv4_mask     = {
                        .src_ip = 0xFFFFFFFF,
                        .dst_ip = 0xFFFFFFFF,
                },
                .ipv6_mask     = {
                        .src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
                        .dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
                },
                .src_port_mask = 0xFFFF,
                .dst_port_mask = 0xFFFF,
                .mac_addr_byte_mask = 0xFF,
                .tunnel_type_mask = 1,
                .tunnel_id_mask = 0xFFFFFFFF,
        },
        .drop_queue = 127,
};

volatile int test_done = 1; /* stop packet forwarding when set to 1. */

struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];

struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;

uint16_t nb_tx_queue_stats_mappings = 0;
uint16_t nb_rx_queue_stats_mappings = 0;

/*
 * Display zero values by default for xstats
 */
uint8_t xstats_hide_zero;

/*
 * Measure of CPU cycles disabled by default
 */
uint8_t record_core_cycles;

/*
 * Display of RX and TX bursts disabled by default
 */
uint8_t record_burst_stats;

unsigned int num_sockets = 0;
unsigned int socket_ids[RTE_MAX_NUMA_NODES];

#ifdef RTE_LIB_BITRATESTATS
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
lcoreid_t bitrate_lcore_id;
uint8_t bitrate_enabled;
#endif

struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;

/*
 * hexadecimal bitmask of RX mq mode can be enabled.
 */
enum rte_eth_rx_mq_mode rx_mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS;

/* Forward function declarations */
static void setup_attached_port(portid_t pi);
static void map_port_queue_stats_mapping_registers(portid_t pi,
                                                   struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
static int eth_event_callback(portid_t port_id,
                              enum rte_eth_event_type type,
                              void *param, void *ret_param);
static void dev_event_callback(const char *device_name,
                                enum rte_dev_event_type type,
                                void *param);

/*
 * Check if all the ports are started.
 * If yes, return positive value. If not, return zero.
 */
static int all_ports_started(void);

struct gso_status gso_ports[RTE_MAX_ETHPORTS];
uint16_t gso_max_segment_size = RTE_ETHER_MAX_LEN - RTE_ETHER_CRC_LEN;

/* Holds the registered mbuf dynamic flags names. */
char dynf_names[64][RTE_MBUF_DYN_NAMESIZE];

/*
 * Helper function to check if socket is already discovered.
 * If yes, return positive value. If not, return zero.
 */
int
new_socket_id(unsigned int socket_id)
{
        unsigned int i;

        for (i = 0; i < num_sockets; i++) {
                if (socket_ids[i] == socket_id)
                        return 0;
        }
        return 1;
}

/*
 * Setup default configuration.
 */
static void
set_default_fwd_lcores_config(void)
{
        unsigned int i;
        unsigned int nb_lc;
        unsigned int sock_num;

        nb_lc = 0;
        for (i = 0; i < RTE_MAX_LCORE; i++) {
                if (!rte_lcore_is_enabled(i))
                        continue;
                sock_num = rte_lcore_to_socket_id(i);
                if (new_socket_id(sock_num)) {
                        if (num_sockets >= RTE_MAX_NUMA_NODES) {
                                rte_exit(EXIT_FAILURE,
                                         "Total sockets greater than %u\n",
                                         RTE_MAX_NUMA_NODES);
                        }
                        socket_ids[num_sockets++] = sock_num;
                }
                if (i == rte_get_main_lcore())
                        continue;
                fwd_lcores_cpuids[nb_lc++] = i;
        }
        nb_lcores = (lcoreid_t) nb_lc;
        nb_cfg_lcores = nb_lcores;
        nb_fwd_lcores = 1;
}

static void
set_def_peer_eth_addrs(void)
{
        portid_t i;

        for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
                peer_eth_addrs[i].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR;
                peer_eth_addrs[i].addr_bytes[5] = i;
        }
}

static void
set_default_fwd_ports_config(void)
{
        portid_t pt_id;
        int i = 0;

        RTE_ETH_FOREACH_DEV(pt_id) {
                fwd_ports_ids[i++] = pt_id;

                /* Update sockets info according to the attached device */
                int socket_id = rte_eth_dev_socket_id(pt_id);
                if (socket_id >= 0 && new_socket_id(socket_id)) {
                        if (num_sockets >= RTE_MAX_NUMA_NODES) {
                                rte_exit(EXIT_FAILURE,
                                         "Total sockets greater than %u\n",
                                         RTE_MAX_NUMA_NODES);
                        }
                        socket_ids[num_sockets++] = socket_id;
                }
        }

        nb_cfg_ports = nb_ports;
        nb_fwd_ports = nb_ports;
}

void
set_def_fwd_config(void)
{
        set_default_fwd_lcores_config();
        set_def_peer_eth_addrs();
        set_default_fwd_ports_config();
}

/* extremely pessimistic estimation of memory required to create a mempool */
static int
calc_mem_size(uint32_t nb_mbufs, uint32_t mbuf_sz, size_t pgsz, size_t *out)
{
        unsigned int n_pages, mbuf_per_pg, leftover;
        uint64_t total_mem, mbuf_mem, obj_sz;

        /* there is no good way to predict how much space the mempool will
         * occupy because it will allocate chunks on the fly, and some of those
         * will come from default DPDK memory while some will come from our
         * external memory, so just assume 128MB will be enough for everyone.
         */
        uint64_t hdr_mem = 128 << 20;

        /* account for possible non-contiguousness */
        obj_sz = rte_mempool_calc_obj_size(mbuf_sz, 0, NULL);
        if (obj_sz > pgsz) {
                TESTPMD_LOG(ERR, "Object size is bigger than page size\n");
                return -1;
        }

        mbuf_per_pg = pgsz / obj_sz;
        leftover = (nb_mbufs % mbuf_per_pg) > 0;
        n_pages = (nb_mbufs / mbuf_per_pg) + leftover;

        mbuf_mem = n_pages * pgsz;

        total_mem = RTE_ALIGN(hdr_mem + mbuf_mem, pgsz);

        if (total_mem > SIZE_MAX) {
                TESTPMD_LOG(ERR, "Memory size too big\n");
                return -1;
        }
        *out = (size_t)total_mem;

        return 0;
}

static int
pagesz_flags(uint64_t page_sz)
{
        /* as per mmap() manpage, all page sizes are log2 of page size
         * shifted by MAP_HUGE_SHIFT
         */
        int log2 = rte_log2_u64(page_sz);

        return (log2 << HUGE_SHIFT);
}

static void *
alloc_mem(size_t memsz, size_t pgsz, bool huge)
{
        void *addr;
        int flags;

        /* allocate anonymous hugepages */
        flags = MAP_ANONYMOUS | MAP_PRIVATE;
        if (huge)
                flags |= HUGE_FLAG | pagesz_flags(pgsz);

        addr = mmap(NULL, memsz, PROT_READ | PROT_WRITE, flags, -1, 0);
        if (addr == MAP_FAILED)
                return NULL;

        return addr;
}

struct extmem_param {
        void *addr;
        size_t len;
        size_t pgsz;
        rte_iova_t *iova_table;
        unsigned int iova_table_len;
};

static int
create_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, struct extmem_param *param,
                bool huge)
{
        uint64_t pgsizes[] = {RTE_PGSIZE_2M, RTE_PGSIZE_1G, /* x86_64, ARM */
                        RTE_PGSIZE_16M, RTE_PGSIZE_16G};    /* POWER */
        unsigned int cur_page, n_pages, pgsz_idx;
        size_t mem_sz, cur_pgsz;
        rte_iova_t *iovas = NULL;
        void *addr;
        int ret;

        for (pgsz_idx = 0; pgsz_idx < RTE_DIM(pgsizes); pgsz_idx++) {
                /* skip anything that is too big */
                if (pgsizes[pgsz_idx] > SIZE_MAX)
                        continue;

                cur_pgsz = pgsizes[pgsz_idx];

                /* if we were told not to allocate hugepages, override */
                if (!huge)
                        cur_pgsz = sysconf(_SC_PAGESIZE);

                ret = calc_mem_size(nb_mbufs, mbuf_sz, cur_pgsz, &mem_sz);
                if (ret < 0) {
                        TESTPMD_LOG(ERR, "Cannot calculate memory size\n");
                        return -1;
                }

                /* allocate our memory */
                addr = alloc_mem(mem_sz, cur_pgsz, huge);

                /* if we couldn't allocate memory with a specified page size,
                 * that doesn't mean we can't do it with other page sizes, so
                 * try another one.
                 */
                if (addr == NULL)
                        continue;

                /* store IOVA addresses for every page in this memory area */
                n_pages = mem_sz / cur_pgsz;

                iovas = malloc(sizeof(*iovas) * n_pages);

                if (iovas == NULL) {
                        TESTPMD_LOG(ERR, "Cannot allocate memory for iova addresses\n");
                        goto fail;
                }
                /* lock memory if it's not huge pages */
                if (!huge)
                        mlock(addr, mem_sz);

                /* populate IOVA addresses */
                for (cur_page = 0; cur_page < n_pages; cur_page++) {
                        rte_iova_t iova;
                        size_t offset;
                        void *cur;

                        offset = cur_pgsz * cur_page;
                        cur = RTE_PTR_ADD(addr, offset);

                        /* touch the page before getting its IOVA */
                        *(volatile char *)cur = 0;

                        iova = rte_mem_virt2iova(cur);

                        iovas[cur_page] = iova;
                }

                break;
        }
        /* if we couldn't allocate anything */
        if (iovas == NULL)
                return -1;

        param->addr = addr;
        param->len = mem_sz;
        param->pgsz = cur_pgsz;
        param->iova_table = iovas;
        param->iova_table_len = n_pages;

        return 0;
fail:
        if (iovas)
                free(iovas);
        if (addr)
                munmap(addr, mem_sz);

        return -1;
}

static int
setup_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, bool huge)
{
        struct extmem_param param;
        int socket_id, ret;

        memset(&param, 0, sizeof(param));

        /* check if our heap exists */
        socket_id = rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
        if (socket_id < 0) {
                /* create our heap */
                ret = rte_malloc_heap_create(EXTMEM_HEAP_NAME);
                if (ret < 0) {
                        TESTPMD_LOG(ERR, "Cannot create heap\n");
                        return -1;
                }
        }

        ret = create_extmem(nb_mbufs, mbuf_sz, &param, huge);
        if (ret < 0) {
                TESTPMD_LOG(ERR, "Cannot create memory area\n");
                return -1;
        }

        /* we now have a valid memory area, so add it to heap */
        ret = rte_malloc_heap_memory_add(EXTMEM_HEAP_NAME,
                        param.addr, param.len, param.iova_table,
                        param.iova_table_len, param.pgsz);

        /* when using VFIO, memory is automatically mapped for DMA by EAL */

        /* not needed any more */
        free(param.iova_table);

        if (ret < 0) {
                TESTPMD_LOG(ERR, "Cannot add memory to heap\n");
                munmap(param.addr, param.len);
                return -1;
        }

        /* success */

        TESTPMD_LOG(DEBUG, "Allocated %zuMB of external memory\n",
                        param.len >> 20);

        return 0;
}
static void
dma_unmap_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused,
             struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused)
{
        uint16_t pid = 0;
        int ret;

        RTE_ETH_FOREACH_DEV(pid) {
                struct rte_eth_dev *dev =
                        &rte_eth_devices[pid];

                ret = rte_dev_dma_unmap(dev->device, memhdr->addr, 0,
                                        memhdr->len);
                if (ret) {
                        TESTPMD_LOG(DEBUG,
                                    "unable to DMA unmap addr 0x%p "
                                    "for device %s\n",
                                    memhdr->addr, dev->data->name);
                }
        }
        ret = rte_extmem_unregister(memhdr->addr, memhdr->len);
        if (ret) {
                TESTPMD_LOG(DEBUG,
                            "unable to un-register addr 0x%p\n", memhdr->addr);
        }
}

static void
dma_map_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused,
           struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused)
{
        uint16_t pid = 0;
        size_t page_size = sysconf(_SC_PAGESIZE);
        int ret;

        ret = rte_extmem_register(memhdr->addr, memhdr->len, NULL, 0,
                                  page_size);
        if (ret) {
                TESTPMD_LOG(DEBUG,
                            "unable to register addr 0x%p\n", memhdr->addr);
                return;
        }
        RTE_ETH_FOREACH_DEV(pid) {
                struct rte_eth_dev *dev =
                        &rte_eth_devices[pid];

                ret = rte_dev_dma_map(dev->device, memhdr->addr, 0,
                                      memhdr->len);
                if (ret) {
                        TESTPMD_LOG(DEBUG,
                                    "unable to DMA map addr 0x%p "
                                    "for device %s\n",
                                    memhdr->addr, dev->data->name);
                }
        }
}

static unsigned int
setup_extbuf(uint32_t nb_mbufs, uint16_t mbuf_sz, unsigned int socket_id,
            char *pool_name, struct rte_pktmbuf_extmem **ext_mem)
{
        struct rte_pktmbuf_extmem *xmem;
        unsigned int ext_num, zone_num, elt_num;
        uint16_t elt_size;

        elt_size = RTE_ALIGN_CEIL(mbuf_sz, RTE_CACHE_LINE_SIZE);
        elt_num = EXTBUF_ZONE_SIZE / elt_size;
        zone_num = (nb_mbufs + elt_num - 1) / elt_num;

        xmem = malloc(sizeof(struct rte_pktmbuf_extmem) * zone_num);
        if (xmem == NULL) {
                TESTPMD_LOG(ERR, "Cannot allocate memory for "
                                 "external buffer descriptors\n");
                *ext_mem = NULL;
                return 0;
        }
        for (ext_num = 0; ext_num < zone_num; ext_num++) {
                struct rte_pktmbuf_extmem *xseg = xmem + ext_num;
                const struct rte_memzone *mz;
                char mz_name[RTE_MEMZONE_NAMESIZE];
                int ret;

                ret = snprintf(mz_name, sizeof(mz_name),
                        RTE_MEMPOOL_MZ_FORMAT "_xb_%u", pool_name, ext_num);
                if (ret < 0 || ret >= (int)sizeof(mz_name)) {
                        errno = ENAMETOOLONG;
                        ext_num = 0;
                        break;
                }
                mz = rte_memzone_reserve_aligned(mz_name, EXTBUF_ZONE_SIZE,
                                                 socket_id,
                                                 RTE_MEMZONE_IOVA_CONTIG |
                                                 RTE_MEMZONE_1GB |
                                                 RTE_MEMZONE_SIZE_HINT_ONLY,
                                                 EXTBUF_ZONE_SIZE);
                if (mz == NULL) {
                        /*
                         * The caller exits on external buffer creation
                         * error, so there is no need to free memzones.
                         */
                        errno = ENOMEM;
                        ext_num = 0;
                        break;
                }
                xseg->buf_ptr = mz->addr;
                xseg->buf_iova = mz->iova;
                xseg->buf_len = EXTBUF_ZONE_SIZE;
                xseg->elt_size = elt_size;
        }
        if (ext_num == 0 && xmem != NULL) {
                free(xmem);
                xmem = NULL;
        }
        *ext_mem = xmem;
        return ext_num;
}

/*
 * Configuration initialisation done once at init time.
 */
static struct rte_mempool *
mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
                 unsigned int socket_id, uint16_t size_idx)
{
        char pool_name[RTE_MEMPOOL_NAMESIZE];
        struct rte_mempool *rte_mp = NULL;
        uint32_t mb_size;

        mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
        mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name), size_idx);

        TESTPMD_LOG(INFO,
                "create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
                pool_name, nb_mbuf, mbuf_seg_size, socket_id);

        switch (mp_alloc_type) {
        case MP_ALLOC_NATIVE:
                {
                        /* wrapper to rte_mempool_create() */
                        TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
                                        rte_mbuf_best_mempool_ops());
                        rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
                                mb_mempool_cache, 0, mbuf_seg_size, socket_id);
                        break;
                }
        case MP_ALLOC_ANON:
                {
                        rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
                                mb_size, (unsigned int) mb_mempool_cache,
                                sizeof(struct rte_pktmbuf_pool_private),
                                socket_id, mempool_flags);
                        if (rte_mp == NULL)
                                goto err;

                        if (rte_mempool_populate_anon(rte_mp) == 0) {
                                rte_mempool_free(rte_mp);
                                rte_mp = NULL;
                                goto err;
                        }
                        rte_pktmbuf_pool_init(rte_mp, NULL);
                        rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
                        rte_mempool_mem_iter(rte_mp, dma_map_cb, NULL);
                        break;
                }
        case MP_ALLOC_XMEM:
        case MP_ALLOC_XMEM_HUGE:
                {
                        int heap_socket;
                        bool huge = mp_alloc_type == MP_ALLOC_XMEM_HUGE;

                        if (setup_extmem(nb_mbuf, mbuf_seg_size, huge) < 0)
                                rte_exit(EXIT_FAILURE, "Could not create external memory\n");

                        heap_socket =
                                rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
                        if (heap_socket < 0)
                                rte_exit(EXIT_FAILURE, "Could not get external memory socket ID\n");

                        TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
                                        rte_mbuf_best_mempool_ops());
                        rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
                                        mb_mempool_cache, 0, mbuf_seg_size,
                                        heap_socket);
                        break;
                }
        case MP_ALLOC_XBUF:
                {
                        struct rte_pktmbuf_extmem *ext_mem;
                        unsigned int ext_num;

                        ext_num = setup_extbuf(nb_mbuf, mbuf_seg_size,
                                               socket_id, pool_name, &ext_mem);
                        if (ext_num == 0)
                                rte_exit(EXIT_FAILURE,
                                         "Can't create pinned data buffers\n");

                        TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
                                        rte_mbuf_best_mempool_ops());
                        rte_mp = rte_pktmbuf_pool_create_extbuf
                                        (pool_name, nb_mbuf, mb_mempool_cache,
                                         0, mbuf_seg_size, socket_id,
                                         ext_mem, ext_num);
                        free(ext_mem);
                        break;
                }
        default:
                {
                        rte_exit(EXIT_FAILURE, "Invalid mempool creation mode\n");
                }
        }

err:
        if (rte_mp == NULL) {
                rte_exit(EXIT_FAILURE,
                        "Creation of mbuf pool for socket %u failed: %s\n",
                        socket_id, rte_strerror(rte_errno));
        } else if (verbose_level > 0) {
                rte_mempool_dump(stdout, rte_mp);
        }
        return rte_mp;
}

/*
 * Check given socket id is valid or not with NUMA mode,
 * if valid, return 0, else return -1
 */
static int
check_socket_id(const unsigned int socket_id)
{
        static int warning_once = 0;

        if (new_socket_id(socket_id)) {
                if (!warning_once && numa_support)
                        printf("Warning: NUMA should be configured manually by"
                               " using --port-numa-config and"
                               " --ring-numa-config parameters along with"
                               " --numa.\n");
                warning_once = 1;
                return -1;
        }
        return 0;
}

/*
 * Get the allowed maximum number of RX queues.
 * *pid return the port id which has minimal value of
 * max_rx_queues in all ports.
 */
queueid_t
get_allowed_max_nb_rxq(portid_t *pid)
{
        queueid_t allowed_max_rxq = RTE_MAX_QUEUES_PER_PORT;
        bool max_rxq_valid = false;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                max_rxq_valid = true;
                if (dev_info.max_rx_queues < allowed_max_rxq) {
                        allowed_max_rxq = dev_info.max_rx_queues;
                        *pid = pi;
                }
        }
        return max_rxq_valid ? allowed_max_rxq : 0;
}

/*
 * Check input rxq is valid or not.
 * If input rxq is not greater than any of maximum number
 * of RX queues of all ports, it is valid.
 * if valid, return 0, else return -1
 */
int
check_nb_rxq(queueid_t rxq)
{
        queueid_t allowed_max_rxq;
        portid_t pid = 0;

        allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
        if (rxq > allowed_max_rxq) {
                printf("Fail: input rxq (%u) can't be greater "
                       "than max_rx_queues (%u) of port %u\n",
                       rxq,
                       allowed_max_rxq,
                       pid);
                return -1;
        }
        return 0;
}

/*
 * Get the allowed maximum number of TX queues.
 * *pid return the port id which has minimal value of
 * max_tx_queues in all ports.
 */
queueid_t
get_allowed_max_nb_txq(portid_t *pid)
{
        queueid_t allowed_max_txq = RTE_MAX_QUEUES_PER_PORT;
        bool max_txq_valid = false;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                max_txq_valid = true;
                if (dev_info.max_tx_queues < allowed_max_txq) {
                        allowed_max_txq = dev_info.max_tx_queues;
                        *pid = pi;
                }
        }
        return max_txq_valid ? allowed_max_txq : 0;
}

/*
 * Check input txq is valid or not.
 * If input txq is not greater than any of maximum number
 * of TX queues of all ports, it is valid.
 * if valid, return 0, else return -1
 */
int
check_nb_txq(queueid_t txq)
{
        queueid_t allowed_max_txq;
        portid_t pid = 0;

        allowed_max_txq = get_allowed_max_nb_txq(&pid);
        if (txq > allowed_max_txq) {
                printf("Fail: input txq (%u) can't be greater "
                       "than max_tx_queues (%u) of port %u\n",
                       txq,
                       allowed_max_txq,
                       pid);
                return -1;
        }
        return 0;
}

/*
 * Get the allowed maximum number of RXDs of every rx queue.
 * *pid return the port id which has minimal value of
 * max_rxd in all queues of all ports.
 */
static uint16_t
get_allowed_max_nb_rxd(portid_t *pid)
{
        uint16_t allowed_max_rxd = UINT16_MAX;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                if (dev_info.rx_desc_lim.nb_max < allowed_max_rxd) {
                        allowed_max_rxd = dev_info.rx_desc_lim.nb_max;
                        *pid = pi;
                }
        }
        return allowed_max_rxd;
}

/*
 * Get the allowed minimal number of RXDs of every rx queue.
 * *pid return the port id which has minimal value of
 * min_rxd in all queues of all ports.
 */
static uint16_t
get_allowed_min_nb_rxd(portid_t *pid)
{
        uint16_t allowed_min_rxd = 0;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                if (dev_info.rx_desc_lim.nb_min > allowed_min_rxd) {
                        allowed_min_rxd = dev_info.rx_desc_lim.nb_min;
                        *pid = pi;
                }
        }

        return allowed_min_rxd;
}

/*
 * Check input rxd is valid or not.
 * If input rxd is not greater than any of maximum number
 * of RXDs of every Rx queues and is not less than any of
 * minimal number of RXDs of every Rx queues, it is valid.
 * if valid, return 0, else return -1
 */
int
check_nb_rxd(queueid_t rxd)
{
        uint16_t allowed_max_rxd;
        uint16_t allowed_min_rxd;
        portid_t pid = 0;

        allowed_max_rxd = get_allowed_max_nb_rxd(&pid);
        if (rxd > allowed_max_rxd) {
                printf("Fail: input rxd (%u) can't be greater "
                       "than max_rxds (%u) of port %u\n",
                       rxd,
                       allowed_max_rxd,
                       pid);
                return -1;
        }

        allowed_min_rxd = get_allowed_min_nb_rxd(&pid);
        if (rxd < allowed_min_rxd) {
                printf("Fail: input rxd (%u) can't be less "
                       "than min_rxds (%u) of port %u\n",
                       rxd,
                       allowed_min_rxd,
                       pid);
                return -1;
        }

        return 0;
}

/*
 * Get the allowed maximum number of TXDs of every rx queues.
 * *pid return the port id which has minimal value of
 * max_txd in every tx queue.
 */
static uint16_t
get_allowed_max_nb_txd(portid_t *pid)
{
        uint16_t allowed_max_txd = UINT16_MAX;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                if (dev_info.tx_desc_lim.nb_max < allowed_max_txd) {
                        allowed_max_txd = dev_info.tx_desc_lim.nb_max;
                        *pid = pi;
                }
        }
        return allowed_max_txd;
}

/*
 * Get the allowed maximum number of TXDs of every tx queues.
 * *pid return the port id which has minimal value of
 * min_txd in every tx queue.
 */
static uint16_t
get_allowed_min_nb_txd(portid_t *pid)
{
        uint16_t allowed_min_txd = 0;
        portid_t pi;
        struct rte_eth_dev_info dev_info;

        RTE_ETH_FOREACH_DEV(pi) {
                if (eth_dev_info_get_print_err(pi, &dev_info) != 0)
                        continue;

                if (dev_info.tx_desc_lim.nb_min > allowed_min_txd) {
                        allowed_min_txd = dev_info.tx_desc_lim.nb_min;
                        *pid = pi;
                }
        }

        return allowed_min_txd;
}

/*
 * Check input txd is valid or not.
 * If input txd is not greater than any of maximum number
 * of TXDs of every Rx queues, it is valid.
 * if valid, return 0, else return -1
 */
int
check_nb_txd(queueid_t txd)
{
        uint16_t allowed_max_txd;
        uint16_t allowed_min_txd;
        portid_t pid = 0;

        allowed_max_txd = get_allowed_max_nb_txd(&pid);
        if (txd > allowed_max_txd) {
                printf("Fail: input txd (%u) can't be greater "
                       "than max_txds (%u) of port %u\n",
                       txd,
                       allowed_max_txd,
                       pid);
                return -1;
        }

        allowed_min_txd = get_allowed_min_nb_txd(&pid);
        if (txd < allowed_min_txd) {
                printf("Fail: input txd (%u) can't be less "
                       "than min_txds (%u) of port %u\n",
                       txd,
                       allowed_min_txd,
                       pid);
                return -1;
        }
        return 0;
}


/*
 * Get the allowed maximum number of hairpin queues.
 * *pid return the port id which has minimal value of
 * max_hairpin_queues in all ports.
 */
queueid_t
get_allowed_max_nb_hairpinq(portid_t *pid)
{
        queueid_t allowed_max_hairpinq = RTE_MAX_QUEUES_PER_PORT;
        portid_t pi;
        struct rte_eth_hairpin_cap cap;

        RTE_ETH_FOREACH_DEV(pi) {
                if (rte_eth_dev_hairpin_capability_get(pi, &cap) != 0) {
                        *pid = pi;
                        return 0;
                }
                if (cap.max_nb_queues < allowed_max_hairpinq) {
                        allowed_max_hairpinq = cap.max_nb_queues;
                        *pid = pi;
                }
        }
        return allowed_max_hairpinq;
}

/*
 * Check input hairpin is valid or not.
 * If input hairpin is not greater than any of maximum number
 * of hairpin queues of all ports, it is valid.
 * if valid, return 0, else return -1
 */
int
check_nb_hairpinq(queueid_t hairpinq)
{
        queueid_t allowed_max_hairpinq;
        portid_t pid = 0;

        allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid);
        if (hairpinq > allowed_max_hairpinq) {
                printf("Fail: input hairpin (%u) can't be greater "
                       "than max_hairpin_queues (%u) of port %u\n",
                       hairpinq, allowed_max_hairpinq, pid);
                return -1;
        }
        return 0;
}

static void
init_config(void)
{
        portid_t pid;
        struct rte_port *port;
        struct rte_mempool *mbp;
        unsigned int nb_mbuf_per_pool;
        lcoreid_t  lc_id;
        uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
        struct rte_gro_param gro_param;
        uint32_t gso_types;
        uint16_t data_size;
        uint16_t overhead_len;
        bool warning = 0;
        int k;
        int ret;

        memset(port_per_socket,0,RTE_MAX_NUMA_NODES);

        /* Configuration of logical cores. */
        fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
                                sizeof(struct fwd_lcore *) * nb_lcores,
                                RTE_CACHE_LINE_SIZE);
        if (fwd_lcores == NULL) {
                rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_lcore *)) "
                                                        "failed\n", nb_lcores);
        }
        for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
                fwd_lcores[lc_id] = rte_zmalloc("testpmd: struct fwd_lcore",
                                               sizeof(struct fwd_lcore),
                                               RTE_CACHE_LINE_SIZE);
                if (fwd_lcores[lc_id] == NULL) {
                        rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_lcore) "
                                                                "failed\n");
                }
                fwd_lcores[lc_id]->cpuid_idx = lc_id;
        }

        RTE_ETH_FOREACH_DEV(pid) {
                port = &ports[pid];
                /* Apply default TxRx configuration for all ports */
                port->dev_conf.txmode = tx_mode;
                port->dev_conf.rxmode = rx_mode;

                ret = eth_dev_info_get_print_err(pid, &port->dev_info);
                if (ret != 0)
                        rte_exit(EXIT_FAILURE,
                                 "rte_eth_dev_info_get() failed\n");

                /* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
                if (port->dev_info.max_rx_pktlen && port->dev_info.max_mtu)
                        overhead_len = port->dev_info.max_rx_pktlen -
                                port->dev_info.max_mtu;
                else
                        overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;

                port->dev_conf.rxmode.max_rx_pkt_len =
                                                RTE_ETHER_MTU + overhead_len;

                /*
                 * This is workaround to avoid resize max rx packet len.
                 * Ethdev assumes jumbo frame size must be greater than
                 * RTE_ETHER_MAX_LEN, and will resize 'max_rx_pkt_len' to
                 * default value when it is greater than RTE_ETHER_MAX_LEN
                 * for normal frame.
                 */
                if (port->dev_conf.rxmode.max_rx_pkt_len > RTE_ETHER_MAX_LEN) {
                        port->dev_conf.rxmode.offloads |=
                                                DEV_RX_OFFLOAD_JUMBO_FRAME;
                }

                if (!(port->dev_info.tx_offload_capa &
                      DEV_TX_OFFLOAD_MBUF_FAST_FREE))
                        port->dev_conf.txmode.offloads &=
                                ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
                if (numa_support) {
                        if (port_numa[pid] != NUMA_NO_CONFIG)
                                port_per_socket[port_numa[pid]]++;
                        else {
                                uint32_t socket_id = rte_eth_dev_socket_id(pid);

                                /*
                                 * if socket_id is invalid,
                                 * set to the first available socket.
                                 */
                                if (check_socket_id(socket_id) < 0)
                                        socket_id = socket_ids[0];
                                port_per_socket[socket_id]++;
                        }
                }

                /* Apply Rx offloads configuration */
                for (k = 0; k < port->dev_info.max_rx_queues; k++)
                        port->rx_conf[k].offloads =
                                port->dev_conf.rxmode.offloads;
                /* Apply Tx offloads configuration */
                for (k = 0; k < port->dev_info.max_tx_queues; k++)
                        port->tx_conf[k].offloads =
                                port->dev_conf.txmode.offloads;

                /* set flag to initialize port/queue */
                port->need_reconfig = 1;
                port->need_reconfig_queues = 1;
                port->tx_metadata = 0;

                /* Check for maximum number of segments per MTU. Accordingly
                 * update the mbuf data size.
                 */
                if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
                                port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
                        data_size = rx_mode.max_rx_pkt_len /
                                port->dev_info.rx_desc_lim.nb_mtu_seg_max;

                        if ((data_size + RTE_PKTMBUF_HEADROOM) >
                                                        mbuf_data_size[0]) {
                                mbuf_data_size[0] = data_size +
                                                 RTE_PKTMBUF_HEADROOM;
                                warning = 1;
                        }
                }
        }

        if (warning)
                TESTPMD_LOG(WARNING,
                            "Configured mbuf size of the first segment %hu\n",
                            mbuf_data_size[0]);
        /*
         * Create pools of mbuf.
         * If NUMA support is disabled, create a single pool of mbuf in
         * socket 0 memory by default.
         * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
         *
         * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
         * nb_txd can be configured at run time.
         */
        if (param_total_num_mbufs)
                nb_mbuf_per_pool = param_total_num_mbufs;
        else {
                nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
                        (nb_lcores * mb_mempool_cache) +
                        RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
                nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
        }

        if (numa_support) {
                uint8_t i, j;

                for (i = 0; i < num_sockets; i++)
                        for (j = 0; j < mbuf_data_size_n; j++)
                                mempools[i * MAX_SEGS_BUFFER_SPLIT + j] =
                                        mbuf_pool_create(mbuf_data_size[j],
                                                          nb_mbuf_per_pool,
                                                          socket_ids[i], j);
        } else {
                uint8_t i;

                for (i = 0; i < mbuf_data_size_n; i++)
                        mempools[i] = mbuf_pool_create
                                        (mbuf_data_size[i],
                                         nb_mbuf_per_pool,
                                         socket_num == UMA_NO_CONFIG ?
                                         0 : socket_num, i);
        }

        init_port_config();

        gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
                DEV_TX_OFFLOAD_GRE_TNL_TSO | DEV_TX_OFFLOAD_UDP_TSO;
        /*
         * Records which Mbuf pool to use by each logical core, if needed.
         */
        for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
                mbp = mbuf_pool_find(
                        rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]), 0);

                if (mbp == NULL)
                        mbp = mbuf_pool_find(0, 0);
                fwd_lcores[lc_id]->mbp = mbp;
                /* initialize GSO context */
                fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
                fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
                fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
                fwd_lcores[lc_id]->gso_ctx.gso_size = RTE_ETHER_MAX_LEN -
                        RTE_ETHER_CRC_LEN;
                fwd_lcores[lc_id]->gso_ctx.flag = 0;
        }

        /* Configuration of packet forwarding streams. */
        if (init_fwd_streams() < 0)
                rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");

        fwd_config_setup();

        /* create a gro context for each lcore */
        gro_param.gro_types = RTE_GRO_TCP_IPV4;
        gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES;
        gro_param.max_item_per_flow = MAX_PKT_BURST;
        for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
                gro_param.socket_id = rte_lcore_to_socket_id(
                                fwd_lcores_cpuids[lc_id]);
                fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param);
                if (fwd_lcores[lc_id]->gro_ctx == NULL) {
                        rte_exit(EXIT_FAILURE,
                                        "rte_gro_ctx_create() failed\n");
                }
        }
}


void
reconfig(portid_t new_port_id, unsigned socket_id)
{
        struct rte_port *port;
        int ret;

        /* Reconfiguration of Ethernet ports. */
        port = &ports[new_port_id];

        ret = eth_dev_info_get_print_err(new_port_id, &port->dev_info);
        if (ret != 0)
                return;

        /* set flag to initialize port/queue */
        port->need_reconfig = 1;
        port->need_reconfig_queues = 1;
        port->socket_id = socket_id;

        init_port_config();
}


int
init_fwd_streams(void)
{
        portid_t pid;
        struct rte_port *port;
        streamid_t sm_id, nb_fwd_streams_new;
        queueid_t q;

        /* set socket id according to numa or not */
        RTE_ETH_FOREACH_DEV(pid) {
                port = &ports[pid];
                if (nb_rxq > port->dev_info.max_rx_queues) {
                        printf("Fail: nb_rxq(%d) is greater than "
                                "max_rx_queues(%d)\n", nb_rxq,
                                port->dev_info.max_rx_queues);
                        return -1;
                }
                if (nb_txq > port->dev_info.max_tx_queues) {
                        printf("Fail: nb_txq(%d) is greater than "
                                "max_tx_queues(%d)\n", nb_txq,
                                port->dev_info.max_tx_queues);
                        return -1;
                }
                if (numa_support) {
                        if (port_numa[pid] != NUMA_NO_CONFIG)
                                port->socket_id = port_numa[pid];
                        else {
                                port->socket_id = rte_eth_dev_socket_id(pid);

                                /*
                                 * if socket_id is invalid,
                                 * set to the first available socket.
                                 */
                                if (check_socket_id(port->socket_id) < 0)
                                        port->socket_id = socket_ids[0];
                        }
                }
                else {
                        if (socket_num == UMA_NO_CONFIG)
                                port->socket_id = 0;
                        else
                                port->socket_id = socket_num;
                }
        }

        q = RTE_MAX(nb_rxq, nb_txq);
        if (q == 0) {
                printf("Fail: Cannot allocate fwd streams as number of queues is 0\n");
                return -1;
        }
        nb_fwd_streams_new = (streamid_t)(nb_ports * q);
        if (nb_fwd_streams_new == nb_fwd_streams)
                return 0;
        /* clear the old */
        if (fwd_streams != NULL) {
                for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
                        if (fwd_streams[sm_id] == NULL)
                                continue;
                        rte_free(fwd_streams[sm_id]);
                        fwd_streams[sm_id] = NULL;
                }
                rte_free(fwd_streams);
                fwd_streams = NULL;
        }

        /* init new */
        nb_fwd_streams = nb_fwd_streams_new;
        if (nb_fwd_streams) {
                fwd_streams = rte_zmalloc("testpmd: fwd_streams",
                        sizeof(struct fwd_stream *) * nb_fwd_streams,
                        RTE_CACHE_LINE_SIZE);
                if (fwd_streams == NULL)
                        rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
                                 " (struct fwd_stream *)) failed\n",
                                 nb_fwd_streams);

                for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
                        fwd_streams[sm_id] = rte_zmalloc("testpmd:"
                                " struct fwd_stream", sizeof(struct fwd_stream),
                                RTE_CACHE_LINE_SIZE);
                        if (fwd_streams[sm_id] == NULL)
                                rte_exit(EXIT_FAILURE, "rte_zmalloc"
                                         "(struct fwd_stream) failed\n");
                }
        }

        return 0;
}

static void
pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
{
        uint64_t total_burst, sburst;
        uint64_t nb_burst;
        uint64_t burst_stats[4];
        uint16_t pktnb_stats[4];
        uint16_t nb_pkt;
        int burst_percent[4], sburstp;
        int i;

        /*
         * First compute the total number of packet bursts and the
         * two highest numbers of bursts of the same number of packets.
         */
        memset(&burst_stats, 0x0, sizeof(burst_stats));
        memset(&pktnb_stats, 0x0, sizeof(pktnb_stats));

        /* Show stats for 0 burst size always */
        total_burst = pbs->pkt_burst_spread[0];
        burst_stats[0] = pbs->pkt_burst_spread[0];
        pktnb_stats[0] = 0;

        /* Find the next 2 burst sizes with highest occurrences. */
        for (nb_pkt = 1; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
                nb_burst = pbs->pkt_burst_spread[nb_pkt];

                if (nb_burst == 0)
                        continue;

                total_burst += nb_burst;

                if (nb_burst > burst_stats[1]) {
                        burst_stats[2] = burst_stats[1];
                        pktnb_stats[2] = pktnb_stats[1];
                        burst_stats[1] = nb_burst;
                        pktnb_stats[1] = nb_pkt;
                } else if (nb_burst > burst_stats[2]) {
                        burst_stats[2] = nb_burst;
                        pktnb_stats[2] = nb_pkt;
                }
        }
        if (total_burst == 0)
                return;

        printf("  %s-bursts : %"PRIu64" [", rx_tx, total_burst);
        for (i = 0, sburst = 0, sburstp = 0; i < 4; i++) {
                if (i == 3) {
                        printf("%d%% of other]\n", 100 - sburstp);
                        return;
                }

                sburst += burst_stats[i];
                if (sburst == total_burst) {
                        printf("%d%% of %d pkts]\n",
                                100 - sburstp, (int) pktnb_stats[i]);
                        return;
                }

                burst_percent[i] =
                        (double)burst_stats[i] / total_burst * 100;
                printf("%d%% of %d pkts + ",
                        burst_percent[i], (int) pktnb_stats[i]);
                sburstp += burst_percent[i];
        }
}

static void
fwd_stream_stats_display(streamid_t stream_id)
{
        struct fwd_stream *fs;
        static const char *fwd_top_stats_border = "-------";

        fs = fwd_streams[stream_id];
        if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
            (fs->fwd_dropped == 0))
                return;
        printf("\n  %s Forward Stats for RX Port=%2d/Queue=%2d -> "
               "TX Port=%2d/Queue=%2d %s\n",
               fwd_top_stats_border, fs->rx_port, fs->rx_queue,
               fs->tx_port, fs->tx_queue, fwd_top_stats_border);
        printf("  RX-packets: %-14"PRIu64" TX-packets: %-14"PRIu64
               " TX-dropped: %-14"PRIu64,
               fs->rx_packets, fs->tx_packets, fs->fwd_dropped);

        /* if checksum mode */
        if (cur_fwd_eng == &csum_fwd_engine) {
                printf("  RX- bad IP checksum: %-14"PRIu64
                       "  Rx- bad L4 checksum: %-14"PRIu64
                       " Rx- bad outer L4 checksum: %-14"PRIu64"\n",
                        fs->rx_bad_ip_csum, fs->rx_bad_l4_csum,
                        fs->rx_bad_outer_l4_csum);
        } else {
                printf("\n");
        }

        if (record_burst_stats) {
                pkt_burst_stats_display("RX", &fs->rx_burst_stats);
                pkt_burst_stats_display("TX", &fs->tx_burst_stats);
        }
}

void
fwd_stats_display(void)
{
        static const char *fwd_stats_border = "----------------------";
        static const char *acc_stats_border = "+++++++++++++++";
        struct {
                struct fwd_stream *rx_stream;
                struct fwd_stream *tx_stream;
                uint64_t tx_dropped;
                uint64_t rx_bad_ip_csum;
                uint64_t rx_bad_l4_csum;
                uint64_t rx_bad_outer_l4_csum;
        } ports_stats[RTE_MAX_ETHPORTS];
        uint64_t total_rx_dropped = 0;
        uint64_t total_tx_dropped = 0;
        uint64_t total_rx_nombuf = 0;
        struct rte_eth_stats stats;
        uint64_t fwd_cycles = 0;
        uint64_t total_recv = 0;
        uint64_t total_xmit = 0;
        struct rte_port *port;
        streamid_t sm_id;
        portid_t pt_id;
        int i;

        memset(ports_stats, 0, sizeof(ports_stats));

        for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
                struct fwd_stream *fs = fwd_streams[sm_id];

                if (cur_fwd_config.nb_fwd_streams >
                    cur_fwd_config.nb_fwd_ports) {
                        fwd_stream_stats_display(sm_id);
                } else {
                        ports_stats[fs->tx_port].tx_stream = fs;
                        ports_stats[fs->rx_port].rx_stream = fs;
                }

                ports_stats[fs->tx_port].tx_dropped += fs->fwd_dropped;

                ports_stats[fs->rx_port].rx_bad_ip_csum += fs->rx_bad_ip_csum;
                ports_stats[fs->rx_port].rx_bad_l4_csum += fs->rx_bad_l4_csum;
                ports_stats[fs->rx_port].rx_bad_outer_l4_csum +=
                                fs->rx_bad_outer_l4_csum;

                if (record_core_cycles)
                        fwd_cycles += fs->core_cycles;
        }
        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
                uint8_t j;

                pt_id = fwd_ports_ids[i];
                port = &ports[pt_id];

                rte_eth_stats_get(pt_id, &stats);
                stats.ipackets -= port->stats.ipackets;
                stats.opackets -= port->stats.opackets;
                stats.ibytes -= port->stats.ibytes;
                stats.obytes -= port->stats.obytes;
                stats.imissed -= port->stats.imissed;
                stats.oerrors -= port->stats.oerrors;
                stats.rx_nombuf -= port->stats.rx_nombuf;

                total_recv += stats.ipackets;
                total_xmit += stats.opackets;
                total_rx_dropped += stats.imissed;
                total_tx_dropped += ports_stats[pt_id].tx_dropped;
                total_tx_dropped += stats.oerrors;
                total_rx_nombuf  += stats.rx_nombuf;

                printf("\n  %s Forward statistics for port %-2d %s\n",
                       fwd_stats_border, pt_id, fwd_stats_border);

                if (!port->rx_queue_stats_mapping_enabled &&
                    !port->tx_queue_stats_mapping_enabled) {
                        printf("  RX-packets: %-14"PRIu64
                               " RX-dropped: %-14"PRIu64
                               "RX-total: %-"PRIu64"\n",
                               stats.ipackets, stats.imissed,
                               stats.ipackets + stats.imissed);

                        if (cur_fwd_eng == &csum_fwd_engine)
                                printf("  Bad-ipcsum: %-14"PRIu64
                                       " Bad-l4csum: %-14"PRIu64
                                       "Bad-outer-l4csum: %-14"PRIu64"\n",
                                       ports_stats[pt_id].rx_bad_ip_csum,
                                       ports_stats[pt_id].rx_bad_l4_csum,
                                       ports_stats[pt_id].rx_bad_outer_l4_csum);
                        if (stats.ierrors + stats.rx_nombuf > 0) {
                                printf("  RX-error: %-"PRIu64"\n",
                                       stats.ierrors);
                                printf("  RX-nombufs: %-14"PRIu64"\n",
                                       stats.rx_nombuf);
                        }

                        printf("  TX-packets: %-14"PRIu64
                               " TX-dropped: %-14"PRIu64
                               "TX-total: %-"PRIu64"\n",
                               stats.opackets, ports_stats[pt_id].tx_dropped,
                               stats.opackets + ports_stats[pt_id].tx_dropped);
                } else {
                        printf("  RX-packets:             %14"PRIu64
                               "    RX-dropped:%14"PRIu64
                               "    RX-total:%14"PRIu64"\n",
                               stats.ipackets, stats.imissed,
                               stats.ipackets + stats.imissed);

                        if (cur_fwd_eng == &csum_fwd_engine)
                                printf("  Bad-ipcsum:%14"PRIu64
                                       "    Bad-l4csum:%14"PRIu64
                                       "    Bad-outer-l4csum: %-14"PRIu64"\n",
                                       ports_stats[pt_id].rx_bad_ip_csum,
                                       ports_stats[pt_id].rx_bad_l4_csum,
                                       ports_stats[pt_id].rx_bad_outer_l4_csum);
                        if ((stats.ierrors + stats.rx_nombuf) > 0) {
                                printf("  RX-error:%"PRIu64"\n", stats.ierrors);
                                printf("  RX-nombufs:             %14"PRIu64"\n",
                                       stats.rx_nombuf);
                        }

                        printf("  TX-packets:             %14"PRIu64
                               "    TX-dropped:%14"PRIu64
                               "    TX-total:%14"PRIu64"\n",
                               stats.opackets, ports_stats[pt_id].tx_dropped,
                               stats.opackets + ports_stats[pt_id].tx_dropped);
                }

                if (record_burst_stats) {
                        if (ports_stats[pt_id].rx_stream)
                                pkt_burst_stats_display("RX",
                                        &ports_stats[pt_id].rx_stream->rx_burst_stats);
                        if (ports_stats[pt_id].tx_stream)
                                pkt_burst_stats_display("TX",
                                        &ports_stats[pt_id].tx_stream->tx_burst_stats);
                }

                if (port->rx_queue_stats_mapping_enabled) {
                        printf("\n");
                        for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) {
                                printf("  Stats reg %2d RX-packets:%14"PRIu64
                                       "     RX-errors:%14"PRIu64
                                       "    RX-bytes:%14"PRIu64"\n",
                                       j, stats.q_ipackets[j],
                                       stats.q_errors[j], stats.q_ibytes[j]);
                        }
                        printf("\n");
                }
                if (port->tx_queue_stats_mapping_enabled) {
                        for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) {
                                printf("  Stats reg %2d TX-packets:%14"PRIu64
                                       "                                 TX-bytes:%14"
                                       PRIu64"\n",
                                       j, stats.q_opackets[j],
                                       stats.q_obytes[j]);
                        }
                }

                printf("  %s--------------------------------%s\n",
                       fwd_stats_border, fwd_stats_border);
        }

        printf("\n  %s Accumulated forward statistics for all ports"
               "%s\n",
               acc_stats_border, acc_stats_border);
        printf("  RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
               "%-"PRIu64"\n"
               "  TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
               "%-"PRIu64"\n",
               total_recv, total_rx_dropped, total_recv + total_rx_dropped,
               total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
        if (total_rx_nombuf > 0)
                printf("  RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
        printf("  %s++++++++++++++++++++++++++++++++++++++++++++++"
               "%s\n",
               acc_stats_border, acc_stats_border);
        if (record_core_cycles) {
#define CYC_PER_MHZ 1E6
                if (total_recv > 0 || total_xmit > 0) {
                        uint64_t total_pkts = 0;
                        if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 ||
                            strcmp(cur_fwd_eng->fwd_mode_name, "flowgen") == 0)
                                total_pkts = total_xmit;
                        else
                                total_pkts = total_recv;

                        printf("\n  CPU cycles/packet=%.2F (total cycles="
                               "%"PRIu64" / total %s packets=%"PRIu64") at %"PRIu64
                               " MHz Clock\n",
                               (double) fwd_cycles / total_pkts,
                               fwd_cycles, cur_fwd_eng->fwd_mode_name, total_pkts,
                               (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
                }
        }
}

void
fwd_stats_reset(void)
{
        streamid_t sm_id;
        portid_t pt_id;
        int i;

        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
                pt_id = fwd_ports_ids[i];
                rte_eth_stats_get(pt_id, &ports[pt_id].stats);
        }
        for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
                struct fwd_stream *fs = fwd_streams[sm_id];

                fs->rx_packets = 0;
                fs->tx_packets = 0;
                fs->fwd_dropped = 0;
                fs->rx_bad_ip_csum = 0;
                fs->rx_bad_l4_csum = 0;
                fs->rx_bad_outer_l4_csum = 0;

                memset(&fs->rx_burst_stats, 0, sizeof(fs->rx_burst_stats));
                memset(&fs->tx_burst_stats, 0, sizeof(fs->tx_burst_stats));
                fs->core_cycles = 0;
        }
}

static void
flush_fwd_rx_queues(void)
{
        struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
        portid_t  rxp;
        portid_t port_id;
        queueid_t rxq;
        uint16_t  nb_rx;
        uint16_t  i;
        uint8_t   j;
        uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
        uint64_t timer_period;

        /* convert to number of cycles */
        timer_period = rte_get_timer_hz(); /* 1 second timeout */

        for (j = 0; j < 2; j++) {
                for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
                        for (rxq = 0; rxq < nb_rxq; rxq++) {
                                port_id = fwd_ports_ids[rxp];
                                /**
                                * testpmd can stuck in the below do while loop
                                * if rte_eth_rx_burst() always returns nonzero
                                * packets. So timer is added to exit this loop
                                * after 1sec timer expiry.
                                */
                                prev_tsc = rte_rdtsc();
                                do {
                                        nb_rx = rte_eth_rx_burst(port_id, rxq,
                                                pkts_burst, MAX_PKT_BURST);
                                        for (i = 0; i < nb_rx; i++)
                                                rte_pktmbuf_free(pkts_burst[i]);

                                        cur_tsc = rte_rdtsc();
                                        diff_tsc = cur_tsc - prev_tsc;
                                        timer_tsc += diff_tsc;
                                } while ((nb_rx > 0) &&
                                        (timer_tsc < timer_period));
                                timer_tsc = 0;
                        }
                }
                rte_delay_ms(10); /* wait 10 milli-seconds before retrying */
        }
}

static void
run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
{
        struct fwd_stream **fsm;
        streamid_t nb_fs;
        streamid_t sm_id;
#ifdef RTE_LIB_BITRATESTATS
        uint64_t tics_per_1sec;
        uint64_t tics_datum;
        uint64_t tics_current;
        uint16_t i, cnt_ports;

        cnt_ports = nb_ports;
        tics_datum = rte_rdtsc();
        tics_per_1sec = rte_get_timer_hz();
#endif
        fsm = &fwd_streams[fc->stream_idx];
        nb_fs = fc->stream_nb;
        do {
                for (sm_id = 0; sm_id < nb_fs; sm_id++)
                        (*pkt_fwd)(fsm[sm_id]);
#ifdef RTE_LIB_BITRATESTATS
                if (bitrate_enabled != 0 &&
                                bitrate_lcore_id == rte_lcore_id()) {
                        tics_current = rte_rdtsc();
                        if (tics_current - tics_datum >= tics_per_1sec) {
                                /* Periodic bitrate calculation */
                                for (i = 0; i < cnt_ports; i++)
                                        rte_stats_bitrate_calc(bitrate_data,
                                                ports_ids[i]);
                                tics_datum = tics_current;
                        }
                }
#endif
#ifdef RTE_LIB_LATENCYSTATS
                if (latencystats_enabled != 0 &&
                                latencystats_lcore_id == rte_lcore_id())
                        rte_latencystats_update();
#endif

        } while (! fc->stopped);
}

static int
start_pkt_forward_on_core(void *fwd_arg)
{
        run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
                             cur_fwd_config.fwd_eng->packet_fwd);
        return 0;
}

/*
 * Run the TXONLY packet forwarding engine to send a single burst of packets.
 * Used to start communication flows in network loopback test configurations.
 */
static int
run_one_txonly_burst_on_core(void *fwd_arg)
{
        struct fwd_lcore *fwd_lc;
        struct fwd_lcore tmp_lcore;

        fwd_lc = (struct fwd_lcore *) fwd_arg;
        tmp_lcore = *fwd_lc;
        tmp_lcore.stopped = 1;
        run_pkt_fwd_on_lcore(&tmp_lcore, tx_only_engine.packet_fwd);
        return 0;
}

/*
 * Launch packet forwarding:
 *     - Setup per-port forwarding context.
 *     - launch logical cores with their forwarding configuration.
 */
static void
launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
{
        port_fwd_begin_t port_fwd_begin;
        unsigned int i;
        unsigned int lc_id;
        int diag;

        port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
        if (port_fwd_begin != NULL) {
                for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
                        (*port_fwd_begin)(fwd_ports_ids[i]);
        }
        for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) {
                lc_id = fwd_lcores_cpuids[i];
                if ((interactive == 0) || (lc_id != rte_lcore_id())) {
                        fwd_lcores[i]->stopped = 0;
                        diag = rte_eal_remote_launch(pkt_fwd_on_lcore,
                                                     fwd_lcores[i], lc_id);
                        if (diag != 0)
                                printf("launch lcore %u failed - diag=%d\n",
                                       lc_id, diag);
                }
        }
}

/*
 * Launch packet forwarding configuration.
 */
void
start_packet_forwarding(int with_tx_first)
{
        port_fwd_begin_t port_fwd_begin;
        port_fwd_end_t  port_fwd_end;
        struct rte_port *port;
        unsigned int i;
        portid_t   pt_id;

        if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
                rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");

        if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 && !nb_txq)
                rte_exit(EXIT_FAILURE, "txq are 0, cannot use txonly fwd mode\n");

        if ((strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") != 0 &&
                strcmp(cur_fwd_eng->fwd_mode_name, "txonly") != 0) &&
                (!nb_rxq || !nb_txq))
                rte_exit(EXIT_FAILURE,
                        "Either rxq or txq are 0, cannot use %s fwd mode\n",
                        cur_fwd_eng->fwd_mode_name);

        if (all_ports_started() == 0) {
                printf("Not all ports were started\n");
                return;
        }
        if (test_done == 0) {
                printf("Packet forwarding already started\n");
                return;
        }


        if(dcb_test) {
                for (i = 0; i < nb_fwd_ports; i++) {
                        pt_id = fwd_ports_ids[i];
                        port = &ports[pt_id];
                        if (!port->dcb_flag) {
                                printf("In DCB mode, all forwarding ports must "
                                       "be configured in this mode.\n");
                                return;
                        }
                }
                if (nb_fwd_lcores == 1) {
                        printf("In DCB mode,the nb forwarding cores "
                               "should be larger than 1.\n");
                        return;
                }
        }
        test_done = 0;

        fwd_config_setup();

        if(!no_flush_rx)
                flush_fwd_rx_queues();

        pkt_fwd_config_display(&cur_fwd_config);
        rxtx_config_display();

        fwd_stats_reset();
        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
                pt_id = fwd_ports_ids[i];
                port = &ports[pt_id];
                map_port_queue_stats_mapping_registers(pt_id, port);
        }
        if (with_tx_first) {
                port_fwd_begin = tx_only_engine.port_fwd_begin;
                if (port_fwd_begin != NULL) {
                        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
                                (*port_fwd_begin)(fwd_ports_ids[i]);
                }
                while (with_tx_first--) {
                        launch_packet_forwarding(
                                        run_one_txonly_burst_on_core);
                        rte_eal_mp_wait_lcore();
                }
                port_fwd_end = tx_only_engine.port_fwd_end;
                if (port_fwd_end != NULL) {
                        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
                                (*port_fwd_end)(fwd_ports_ids[i]);
                }
        }
        launch_packet_forwarding(start_pkt_forward_on_core);
}

void
stop_packet_forwarding(void)
{
        port_fwd_end_t port_fwd_end;
        lcoreid_t lc_id;
        portid_t pt_id;
        int i;

        if (test_done) {
                printf("Packet forwarding not started\n");
                return;
        }
        printf("Telling cores to stop...");
        for (lc_id = 0; lc_id < cur_fwd_config.nb_fwd_lcores; lc_id++)
                fwd_lcores[lc_id]->stopped = 1;
        printf("\nWaiting for lcores to finish...\n");
        rte_eal_mp_wait_lcore();
        port_fwd_end = cur_fwd_config.fwd_eng->port_fwd_end;
        if (port_fwd_end != NULL) {
                for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
                        pt_id = fwd_ports_ids[i];
                        (*port_fwd_end)(pt_id);
                }
        }

        fwd_stats_display();

        printf("\nDone.\n");
        test_done = 1;
}

void
dev_set_link_up(portid_t pid)
{
        if (rte_eth_dev_set_link_up(pid) < 0)
                printf("\nSet link up fail.\n");
}

void
dev_set_link_down(portid_t pid)
{
        if (rte_eth_dev_set_link_down(pid) < 0)
                printf("\nSet link down fail.\n");
}

static int
all_ports_started(void)
{
        portid_t pi;
        struct rte_port *port;

        RTE_ETH_FOREACH_DEV(pi) {
                port = &ports[pi];
                /* Check if there is a port which is not started */
                if ((port->port_status != RTE_PORT_STARTED) &&
                        (port->slave_flag == 0))
                        return 0;
        }

        /* No port is not started */
        return 1;
}

int
port_is_stopped(portid_t port_id)
{
        struct rte_port *port = &ports[port_id];

        if ((port->port_status != RTE_PORT_STOPPED) &&
            (port->slave_flag == 0))
                return 0;
        return 1;
}

int
all_ports_stopped(void)
{
        portid_t pi;

        RTE_ETH_FOREACH_DEV(pi) {
                if (!port_is_stopped(pi))
                        return 0;
        }

        return 1;
}

int
port_is_started(portid_t port_id)
{
        if (port_id_is_invalid(port_id, ENABLED_WARN))
                return 0;

        if (ports[port_id].port_status != RTE_PORT_STARTED)
                return 0;

        return 1;
}

/* Configure the Rx and Tx hairpin queues for the selected port. */
static int
setup_hairpin_queues(portid_t pi, portid_t p_pi, uint16_t cnt_pi)
{
        queueid_t qi;
        struct rte_eth_hairpin_conf hairpin_conf = {
                .peer_count = 1,
        };
        int i;
        int diag;
        struct rte_port *port = &ports[pi];
        uint16_t peer_rx_port = pi;
        uint16_t peer_tx_port = pi;
        uint32_t manual = 1;
        uint32_t tx_exp = hairpin_mode & 0x10;

        if (!(hairpin_mode & 0xf)) {
                peer_rx_port = pi;
                peer_tx_port = pi;
                manual = 0;
        } else if (hairpin_mode & 0x1) {
                peer_tx_port = rte_eth_find_next_owned_by(pi + 1,
                                                       RTE_ETH_DEV_NO_OWNER);
                if (peer_tx_port >= RTE_MAX_ETHPORTS)
                        peer_tx_port = rte_eth_find_next_owned_by(0,
                                                RTE_ETH_DEV_NO_OWNER);
                if (p_pi != RTE_MAX_ETHPORTS) {
                        peer_rx_port = p_pi;
                } else {
                        uint16_t next_pi;

                        /* Last port will be the peer RX port of the first. */
                        RTE_ETH_FOREACH_DEV(next_pi)
                                peer_rx_port = next_pi;
                }
                manual = 1;
        } else if (hairpin_mode & 0x2) {
                if (cnt_pi & 0x1) {
                        peer_rx_port = p_pi;
                } else {
                        peer_rx_port = rte_eth_find_next_owned_by(pi + 1,
                                                RTE_ETH_DEV_NO_OWNER);
                        if (peer_rx_port >= RTE_MAX_ETHPORTS)
                                peer_rx_port = pi;
                }
                peer_tx_port = peer_rx_port;
                manual = 1;
        }

        for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) {
                hairpin_conf.peers[0].port = peer_rx_port;
                hairpin_conf.peers[0].queue = i + nb_rxq;
                hairpin_conf.manual_bind = !!manual;
                hairpin_conf.tx_explicit = !!tx_exp;
                diag = rte_eth_tx_hairpin_queue_setup
                        (pi, qi, nb_txd, &hairpin_conf);
                i++;
                if (diag == 0)
                        continue;

                /* Fail to setup rx queue, return */
                if (rte_atomic16_cmpset(&(port->port_status),
                                        RTE_PORT_HANDLING,
                                        RTE_PORT_STOPPED) == 0)
                        printf("Port %d can not be set back "
                                        "to stopped\n", pi);
                printf("Fail to configure port %d hairpin "
                                "queues\n", pi);
                /* try to reconfigure queues next time */
                port->need_reconfig_queues = 1;
                return -1;
        }
        for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) {
                hairpin_conf.peers[0].port = peer_tx_port;
                hairpin_conf.peers[0].queue = i + nb_txq;
                hairpin_conf.manual_bind = !!manual;
                hairpin_conf.tx_explicit = !!tx_exp;
                diag = rte_eth_rx_hairpin_queue_setup
                        (pi, qi, nb_rxd, &hairpin_conf);
                i++;
                if (diag == 0)
                        continue;

                /* Fail to setup rx queue, return */
                if (rte_atomic16_cmpset(&(port->port_status),
                                        RTE_PORT_HANDLING,
                                        RTE_PORT_STOPPED) == 0)
                        printf("Port %d can not be set back "
                                        "to stopped\n", pi);
                printf("Fail to configure port %d hairpin "
                                "queues\n", pi);
                /* try to reconfigure queues next time */
                port->need_reconfig_queues = 1;
                return -1;
        }
        return 0;
}

/* Configure the Rx with optional split. */
int
rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
               uint16_t nb_rx_desc, unsigned int socket_id,
               struct rte_eth_rxconf *rx_conf, struct rte_mempool *mp)
{
        union rte_eth_rxseg rx_useg[MAX_SEGS_BUFFER_SPLIT] = {};
        unsigned int i, mp_n;
        int ret;

        if (rx_pkt_nb_segs <= 1 ||
            (rx_conf->offloads & RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT) == 0) {
                rx_conf->rx_seg = NULL;
                rx_conf->rx_nseg = 0;
                ret = rte_eth_rx_queue_setup(port_id, rx_queue_id,
                                             nb_rx_desc, socket_id,
                                             rx_conf, mp);
                return ret;
        }
        for (i = 0; i < rx_pkt_nb_segs; i++) {
                struct rte_eth_rxseg_split *rx_seg = &rx_useg[i].split;
                struct rte_mempool *mpx;
                /*
                 * Use last valid pool for the segments with number
                 * exceeding the pool index.
                 */
                mp_n = (i > mbuf_data_size_n) ? mbuf_data_size_n - 1 : i;
                mpx = mbuf_pool_find(socket_id, mp_n);
                /* Handle zero as mbuf data buffer size. */
                rx_seg->length = rx_pkt_seg_lengths[i] ?
                                   rx_pkt_seg_lengths[i] :
                                   mbuf_data_size[mp_n];
                rx_seg->offset = i < rx_pkt_nb_offs ?
                                   rx_pkt_seg_offsets[i] : 0;
                rx_seg->mp = mpx ? mpx : mp;
        }
        rx_conf->rx_nseg = rx_pkt_nb_segs;
        rx_conf->rx_seg = rx_useg;
        ret = rte_eth_rx_queue_setup(port_id, rx_queue_id, nb_rx_desc,
                                    socket_id, rx_conf, NULL);
        rx_conf->rx_seg = NULL;
        rx_conf->rx_nseg = 0;
        return ret;
}

int
start_port(portid_t pid)
{
        int diag, need_check_link_status = -1;
        portid_t pi;
        portid_t p_pi = RTE_MAX_ETHPORTS;
        portid_t pl[RTE_MAX_ETHPORTS];
        portid_t peer_pl[RTE_MAX_ETHPORTS];
        uint16_t cnt_pi = 0;
        uint16_t cfg_pi = 0;
        int peer_pi;
        queueid_t qi;
        struct rte_port *port;
        struct rte_ether_addr mac_addr;
        struct rte_eth_hairpin_cap cap;

        if (port_id_is_invalid(pid, ENABLED_WARN))
                return 0;

        if(dcb_config)
                dcb_test = 1;
        RTE_ETH_FOREACH_DEV(pi) {
                if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
                        continue;

                need_check_link_status = 0;
                port = &ports[pi];
                if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
                                                 RTE_PORT_HANDLING) == 0) {
                        printf("Port %d is now not stopped\n", pi);
                        continue;
                }

                if (port->need_reconfig > 0) {
                        port->need_reconfig = 0;

                        if (flow_isolate_all) {
                                int ret = port_flow_isolate(pi, 1);
                                if (ret) {
                                        printf("Failed to apply isolated"
                                               " mode on port %d\n", pi);
                                        return -1;
                                }
                        }
                        configure_rxtx_dump_callbacks(0);
                        printf("Configuring Port %d (socket %u)\n", pi,
                                        port->socket_id);
                        if (nb_hairpinq > 0 &&
                            rte_eth_dev_hairpin_capability_get(pi, &cap)) {
                                printf("Port %d doesn't support hairpin "
                                       "queues\n", pi);
                                return -1;
                        }
                        /* configure port */
                        diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
                                                     nb_txq + nb_hairpinq,
                                                     &(port->dev_conf));
                        if (diag != 0) {
                                if (rte_atomic16_cmpset(&(port->port_status),
                                RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
                                        printf("Port %d can not be set back "
                                                        "to stopped\n", pi);
                                printf("Fail to configure port %d\n", pi);
                                /* try to reconfigure port next time */
                                port->need_reconfig = 1;
                                return -1;
                        }
                }
                if (port->need_reconfig_queues > 0) {
                        port->need_reconfig_queues = 0;
                        /* setup tx queues */
                        for (qi = 0; qi < nb_txq; qi++) {
                                if ((numa_support) &&
                                        (txring_numa[pi] != NUMA_NO_CONFIG))
                                        diag = rte_eth_tx_queue_setup(pi, qi,
                                                port->nb_tx_desc[qi],
                                                txring_numa[pi],
                                                &(port->tx_conf[qi]));
                                else
                                        diag = rte_eth_tx_queue_setup(pi, qi,
                                                port->nb_tx_desc[qi],
                                                port->socket_id,
                                                &(port->tx_conf[qi]));

                                if (diag == 0)
                                        continue;

                                /* Fail to setup tx queue, return */
                                if (rte_atomic16_cmpset(&(port->port_status),
                                                        RTE_PORT_HANDLING,
                                                        RTE_PORT_STOPPED) == 0)
                                        printf("Port %d can not be set back "
                                                        "to stopped\n", pi);
                                printf("Fail to configure port %d tx queues\n",
                                       pi);
                                /* try to reconfigure queues next time */
                                port->need_reconfig_queues = 1;
                                return -1;
                        }
                        for (qi = 0; qi < nb_rxq; qi++) {
                                /* setup rx queues */
                                if ((numa_support) &&
                                        (rxring_numa[pi] != NUMA_NO_CONFIG)) {
                                        struct rte_mempool * mp =
                                                mbuf_pool_find
                                                        (rxring_numa[pi], 0);
                                        if (mp == NULL) {
                                                printf("Failed to setup RX queue:"
                                                        "No mempool allocation"
                                                        " on the socket %d\n",
                                                        rxring_numa[pi]);
                                                return -1;
                                        }

                                        diag = rx_queue_setup(pi, qi,
                                             port->nb_rx_desc[qi],
                                             rxring_numa[pi],
                                             &(port->rx_conf[qi]),
                                             mp);
                                } else {
                                        struct rte_mempool *mp =
                                                mbuf_pool_find
                                                        (port->socket_id, 0);
                                        if (mp == NULL) {
                                                printf("Failed to setup RX queue:"
                                                        "No mempool allocation"
                                                        " on the socket %d\n",
                                                        port->socket_id);
                                                return -1;
                                        }
                                        diag = rx_queue_setup(pi, qi,
                                             port->nb_rx_desc[qi],
                                             port->socket_id,
                                             &(port->rx_conf[qi]),
                                             mp);
                                }
                                if (diag == 0)
                                        continue;

                                /* Fail to setup rx queue, return */
                                if (rte_atomic16_cmpset(&(port->port_status),
                                                        RTE_PORT_HANDLING,
                                                        RTE_PORT_STOPPED) == 0)
                                        printf("Port %d can not be set back "
                                                        "to stopped\n", pi);
                                printf("Fail to configure port %d rx queues\n",
                                       pi);
                                /* try to reconfigure queues next time */
                                port->need_reconfig_queues = 1;
                                return -1;
                        }
                        /* setup hairpin queues */
                        if (setup_hairpin_queues(pi, p_pi, cnt_pi) != 0)
                                return -1;
                }
                configure_rxtx_dump_callbacks(verbose_level);
                if (clear_ptypes) {
                        diag = rte_eth_dev_set_ptypes(pi, RTE_PTYPE_UNKNOWN,
                                        NULL, 0);
                        if (diag < 0)
                                printf(
                                "Port %d: Failed to disable Ptype parsing\n",
                                pi);
                }

                p_pi = pi;
                cnt_pi++;

                /* start port */
                if (rte_eth_dev_start(pi) < 0) {
                        printf("Fail to start port %d\n", pi);

                        /* Fail to setup rx queue, return */
                        if (rte_atomic16_cmpset(&(port->port_status),
                                RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
                                printf("Port %d can not be set back to "
                                                        "stopped\n", pi);
                        continue;
                }

                if (rte_atomic16_cmpset(&(port->port_status),
                        RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
                        printf("Port %d can not be set into started\n", pi);

                if (eth_macaddr_get_print_err(pi, &mac_addr) == 0)
                        printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
                                mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
                                mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
                                mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);

                /* at least one port started, need checking link status */
                need_check_link_status = 1;

                pl[cfg_pi++] = pi;
        }

        if (need_check_link_status == 1 && !no_link_check)
                check_all_ports_link_status(RTE_PORT_ALL);
        else if (need_check_link_status == 0)
                printf("Please stop the ports first\n");

        if (hairpin_mode & 0xf) {
                uint16_t i;
                int j;

                /* bind all started hairpin ports */
                for (i = 0; i < cfg_pi; i++) {
                        pi = pl[i];
                        /* bind current Tx to all peer Rx */
                        peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
                                                        RTE_MAX_ETHPORTS, 1);
                        if (peer_pi < 0)
                                return peer_pi;
                        for (j = 0; j < peer_pi; j++) {
                                if (!port_is_started(peer_pl[j]))
                                        continue;
                                diag = rte_eth_hairpin_bind(pi, peer_pl[j]);
                                if (diag < 0) {
                                        printf("Error during binding hairpin"
                                               " Tx port %u to %u: %s\n",
                                               pi, peer_pl[j],
                                               rte_strerror(-diag));
                                        return -1;
                                }
                        }
                        /* bind all peer Tx to current Rx */
                        peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
                                                        RTE_MAX_ETHPORTS, 0);
                        if (peer_pi < 0)
                                return peer_pi;
                        for (j = 0; j < peer_pi; j++) {
                                if (!port_is_started(peer_pl[j]))
                                        continue;
                                diag = rte_eth_hairpin_bind(peer_pl[j], pi);
                                if (diag < 0) {
                                        printf("Error during binding hairpin"
                                               " Tx port %u to %u: %s\n",
                                               peer_pl[j], pi,
                                               rte_strerror(-diag));
                                        return -1;
                                }
                        }
                }
        }

        printf("Done\n");
        return 0;
}

void
stop_port(portid_t pid)
{
        portid_t pi;
        struct rte_port *port;
        int need_check_link_status = 0;
        portid_t peer_pl[RTE_MAX_ETHPORTS];
        int peer_pi;

        if (dcb_test) {
                dcb_test = 0;
                dcb_config = 0;
        }

        if (port_id_is_invalid(pid, ENABLED_WARN))
                return;

        printf("Stopping ports...\n");

        RTE_ETH_FOREACH_DEV(pi) {
                if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
                        continue;

                if (port_is_forwarding(pi) != 0 && test_done == 0) {
                        printf("Please remove port %d from forwarding configuration.\n", pi);
                        continue;
                }

                if (port_is_bonding_slave(pi)) {
                        printf("Please remove port %d from bonded device.\n", pi);
                        continue;
                }

                port = &ports[pi];
                if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
                                                RTE_PORT_HANDLING) == 0)
                        continue;

                if (hairpin_mode & 0xf) {
                        int j;

                        rte_eth_hairpin_unbind(pi, RTE_MAX_ETHPORTS);
                        /* unbind all peer Tx from current Rx */
                        peer_pi = rte_eth_hairpin_get_peer_ports(pi, peer_pl,
                                                        RTE_MAX_ETHPORTS, 0);
                        if (peer_pi < 0)
                                continue;
                        for (j = 0; j < peer_pi; j++) {
                                if (!port_is_started(peer_pl[j]))
                                        continue;
                                rte_eth_hairpin_unbind(peer_pl[j], pi);
                        }
                }

                if (rte_eth_dev_stop(pi) != 0)
                        RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
                                pi);

                if (rte_atomic16_cmpset(&(port->port_status),
                        RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
                        printf("Port %d can not be set into stopped\n", pi);
                need_check_link_status = 1;
        }
        if (need_check_link_status && !no_link_check)
                check_all_ports_link_status(RTE_PORT_ALL);

        printf("Done\n");
}

static void
remove_invalid_ports_in(portid_t *array, portid_t *total)
{
        portid_t i;
        portid_t new_total = 0;

        for (i = 0; i < *total; i++)
                if (!port_id_is_invalid(array[i], DISABLED_WARN)) {
                        array[new_total] = array[i];
                        new_total++;
                }
        *total = new_total;
}

static void
remove_invalid_ports(void)
{
        remove_invalid_ports_in(ports_ids, &nb_ports);
        remove_invalid_ports_in(fwd_ports_ids, &nb_fwd_ports);
        nb_cfg_ports = nb_fwd_ports;
}

void
close_port(portid_t pid)
{
        portid_t pi;
        struct rte_port *port;

        if (port_id_is_invalid(pid, ENABLED_WARN))
                return;

        printf("Closing ports...\n");

        RTE_ETH_FOREACH_DEV(pi) {
                if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
                        continue;

                if (port_is_forwarding(pi) != 0 && test_done == 0) {
                        printf("Please remove port %d from forwarding configuration.\n", pi);
                        continue;
                }

                if (port_is_bonding_slave(pi)) {
                        printf("Please remove port %d from bonded device.\n", pi);
                        continue;
                }

                port = &ports[pi];
                if (rte_atomic16_cmpset(&(port->port_status),
                        RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
                        printf("Port %d is already closed\n", pi);
                        continue;
                }

                port_flow_flush(pi);
                rte_eth_dev_close(pi);
        }

        remove_invalid_ports();
        printf("Done\n");
}

void
reset_port(portid_t pid)
{
        int diag;
        portid_t pi;
        struct rte_port *port;

        if (port_id_is_invalid(pid, ENABLED_WARN))
                return;

        if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) ||
                (pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) {
                printf("Can not reset port(s), please stop port(s) first.\n");
                return;
        }

        printf("Resetting ports...\n");

        RTE_ETH_FOREACH_DEV(pi) {
                if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
                        continue;

                if (port_is_forwarding(pi) != 0 && test_done == 0) {
                        printf("Please remove port %d from forwarding "
                               "configuration.\n", pi);
                        continue;
                }

                if (port_is_bonding_slave(pi)) {
                        printf("Please remove port %d from bonded device.\n",
                               pi);
                        continue;
                }

                diag = rte_eth_dev_reset(pi);
                if (diag == 0) {
                        port = &ports[pi];
                        port->need_reconfig = 1;
                        port->need_reconfig_queues = 1;
                } else {
                        printf("Failed to reset port %d. diag=%d\n", pi, diag);
                }
        }

        printf("Done\n");
}

void
attach_port(char *identifier)
{
        portid_t pi;
        struct rte_dev_iterator iterator;

        printf("Attaching a new port...\n");

        if (identifier == NULL) {
                printf("Invalid parameters are specified\n");
                return;
        }

        if (rte_dev_probe(identifier) < 0) {
                TESTPMD_LOG(ERR, "Failed to attach port %s\n", identifier);
                return;
        }

        /* first attach mode: event */
        if (setup_on_probe_event) {
                /* new ports are detected on RTE_ETH_EVENT_NEW event */
                for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
                        if (ports[pi].port_status == RTE_PORT_HANDLING &&
                                        ports[pi].need_setup != 0)
                                setup_attached_port(pi);
                return;
        }

        /* second attach mode: iterator */
        RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
                /* setup ports matching the devargs used for probing */
                if (port_is_forwarding(pi))
                        continue; /* port was already attached before */
                setup_attached_port(pi);
        }
}

static void
setup_attached_port(portid_t pi)
{
        unsigned int socket_id;
        int ret;

        socket_id = (unsigned)rte_eth_dev_socket_id(pi);
        /* if socket_id is invalid, set to the first available socket. */
        if (check_socket_id(socket_id) < 0)
                socket_id = socket_ids[0];
        reconfig(pi, socket_id);
        ret = rte_eth_promiscuous_enable(pi);
        if (ret != 0)
                printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
                        pi, rte_strerror(-ret));

        ports_ids[nb_ports++] = pi;
        fwd_ports_ids[nb_fwd_ports++] = pi;
        nb_cfg_ports = nb_fwd_ports;
        ports[pi].need_setup = 0;
        ports[pi].port_status = RTE_PORT_STOPPED;

        printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
        printf("Done\n");
}

static void
detach_device(struct rte_device *dev)
{
        portid_t sibling;

        if (dev == NULL) {
                printf("Device already removed\n");
                return;
        }

        printf("Removing a device...\n");

        RTE_ETH_FOREACH_DEV_OF(sibling, dev) {
                if (ports[sibling].port_status != RTE_PORT_CLOSED) {
                        if (ports[sibling].port_status != RTE_PORT_STOPPED) {
                                printf("Port %u not stopped\n", sibling);
                                return;
                        }
                        port_flow_flush(sibling);
                }
        }

        if (rte_dev_remove(dev) < 0) {
                TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
                return;
        }
        remove_invalid_ports();

        printf("Device is detached\n");
        printf("Now total ports is %d\n", nb_ports);
        printf("Done\n");
        return;
}

void
detach_port_device(portid_t port_id)
{
        if (port_id_is_invalid(port_id, ENABLED_WARN))
                return;

        if (ports[port_id].port_status != RTE_PORT_CLOSED) {
                if (ports[port_id].port_status != RTE_PORT_STOPPED) {
                        printf("Port not stopped\n");
                        return;
                }
                printf("Port was not closed\n");
        }

        detach_device(rte_eth_devices[port_id].device);
}

void
detach_devargs(char *identifier)
{
        struct rte_dev_iterator iterator;
        struct rte_devargs da;
        portid_t port_id;

        printf("Removing a device...\n");

        memset(&da, 0, sizeof(da));
        if (rte_devargs_parsef(&da, "%s", identifier)) {
                printf("cannot parse identifier\n");
                if (da.args)
                        free(da.args);
                return;
        }

        RTE_ETH_FOREACH_MATCHING_DEV(port_id, identifier, &iterator) {
                if (ports[port_id].port_status != RTE_PORT_CLOSED) {
                        if (ports[port_id].port_status != RTE_PORT_STOPPED) {
                                printf("Port %u not stopped\n", port_id);
                                rte_eth_iterator_cleanup(&iterator);
                                return;
                        }
                        port_flow_flush(port_id);
                }
        }

        if (rte_eal_hotplug_remove(da.bus->name, da.name) != 0) {
                TESTPMD_LOG(ERR, "Failed to detach device %s(%s)\n",
                            da.name, da.bus->name);
                return;
        }

        remove_invalid_ports();

        printf("Device %s is detached\n", identifier);
        printf("Now total ports is %d\n", nb_ports);
        printf("Done\n");
}

void
pmd_test_exit(void)
{
        portid_t pt_id;
        unsigned int i;
        int ret;

        if (test_done == 0)
                stop_packet_forwarding();

        for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
                if (mempools[i]) {
                        if (mp_alloc_type == MP_ALLOC_ANON)
                                rte_mempool_mem_iter(mempools[i], dma_unmap_cb,
                                                     NULL);
                }
        }
        if (ports != NULL) {
                no_link_check = 1;
                RTE_ETH_FOREACH_DEV(pt_id) {
                        printf("\nStopping port %d...\n", pt_id);
                        fflush(stdout);
                        stop_port(pt_id);
                }
                RTE_ETH_FOREACH_DEV(pt_id) {
                        printf("\nShutting down port %d...\n", pt_id);
                        fflush(stdout);
                        close_port(pt_id);
                }
        }

        if (hot_plug) {
                ret = rte_dev_event_monitor_stop();
                if (ret) {
                        RTE_LOG(ERR, EAL,
                                "fail to stop device event monitor.");
                        return;
                }

                ret = rte_dev_event_callback_unregister(NULL,
                        dev_event_callback, NULL);
                if (ret < 0) {
                        RTE_LOG(ERR, EAL,
                                "fail to unregister device event callback.\n");
                        return;
                }

                ret = rte_dev_hotplug_handle_disable();
                if (ret) {
                        RTE_LOG(ERR, EAL,
                                "fail to disable hotplug handling.\n");
                        return;
                }
        }
        for (i = 0 ; i < RTE_DIM(mempools) ; i++) {
                if (mempools[i])
                        rte_mempool_free(mempools[i]);
        }

        printf("\nBye...\n");
}

typedef void (*cmd_func_t)(void);
struct pmd_test_command {
        const char *cmd_name;
        cmd_func_t cmd_func;
};

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
        portid_t portid;
        uint8_t count, all_ports_up, print_flag = 0;
        struct rte_eth_link link;
        int ret;
        char link_status[RTE_ETH_LINK_MAX_STR_LEN];

        printf("Checking link statuses...\n");
        fflush(stdout);
        for (count = 0; count <= MAX_CHECK_TIME; count++) {
                all_ports_up = 1;
                RTE_ETH_FOREACH_DEV(portid) {
                        if ((port_mask & (1 << portid)) == 0)
                                continue;
                        memset(&link, 0, sizeof(link));
                        ret = rte_eth_link_get_nowait(portid, &link);
                        if (ret < 0) {
                                all_ports_up = 0;
                                if (print_flag == 1)
                                        printf("Port %u link get failed: %s\n",
                                                portid, rte_strerror(-ret));
                                continue;
                        }
                        /* print link status if flag set */
                        if (print_flag == 1) {
                                rte_eth_link_to_str(link_status,
                                        sizeof(link_status), &link);
                                printf("Port %d %s\n", portid, link_status);
                                continue;
                        }
                        /* clear all_ports_up flag if any link down */
                        if (link.link_status == ETH_LINK_DOWN) {
                                all_ports_up = 0;
                                break;
                        }
                }
                /* after finally printing all link status, get out */
                if (print_flag == 1)
                        break;

                if (all_ports_up == 0) {
                        fflush(stdout);
                        rte_delay_ms(CHECK_INTERVAL);
                }

                /* set the print_flag if all ports up or timeout */
                if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
                        print_flag = 1;
                }

                if (lsc_interrupt)
                        break;
        }
}

static void
rmv_port_callback(void *arg)
{
        int need_to_start = 0;
        int org_no_link_check = no_link_check;
        portid_t port_id = (intptr_t)arg;
        struct rte_device *dev;

        RTE_ETH_VALID_PORTID_OR_RET(port_id);

        if (!test_done && port_is_forwarding(port_id)) {
                need_to_start = 1;
                stop_packet_forwarding();
        }
        no_link_check = 1;
        stop_port(port_id);
        no_link_check = org_no_link_check;

        /* Save rte_device pointer before closing ethdev port */
        dev = rte_eth_devices[port_id].device;
        close_port(port_id);
        detach_device(dev); /* might be already removed or have more ports */

        if (need_to_start)
                start_packet_forwarding(0);
}

/* This function is used by the interrupt thread */
static int
eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
                  void *ret_param)
{
        RTE_SET_USED(param);
        RTE_SET_USED(ret_param);

        if (type >= RTE_ETH_EVENT_MAX) {
                fprintf(stderr, "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
                        port_id, __func__, type);
                fflush(stderr);
        } else if (event_print_mask & (UINT32_C(1) << type)) {
                printf("\nPort %" PRIu16 ": %s event\n", port_id,
                        eth_event_desc[type]);
                fflush(stdout);
        }

        switch (type) {
        case RTE_ETH_EVENT_NEW:
                ports[port_id].need_setup = 1;
                ports[port_id].port_status = RTE_PORT_HANDLING;
                break;
        case RTE_ETH_EVENT_INTR_RMV:
                if (port_id_is_invalid(port_id, DISABLED_WARN))
                        break;
                if (rte_eal_alarm_set(100000,
                                rmv_port_callback, (void *)(intptr_t)port_id))
                        fprintf(stderr, "Could not set up deferred device removal\n");
                break;
        case RTE_ETH_EVENT_DESTROY:
                ports[port_id].port_status = RTE_PORT_CLOSED;
                printf("Port %u is closed\n", port_id);
                break;
        default:
                break;
        }
        return 0;
}

static int
register_eth_event_callback(void)
{
        int ret;
        enum rte_eth_event_type event;

        for (event = RTE_ETH_EVENT_UNKNOWN;
                        event < RTE_ETH_EVENT_MAX; event++) {
                ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
                                event,
                                eth_event_callback,
                                NULL);
                if (ret != 0) {
                        TESTPMD_LOG(ERR, "Failed to register callback for "
                                        "%s event\n", eth_event_desc[event]);
                        return -1;
                }
        }

        return 0;
}

/* This function is used by the interrupt thread */
static void
dev_event_callback(const char *device_name, enum rte_dev_event_type type,
                             __rte_unused void *arg)
{
        uint16_t port_id;
        int ret;

        if (type >= RTE_DEV_EVENT_MAX) {
                fprintf(stderr, "%s called upon invalid event %d\n",
                        __func__, type);
                fflush(stderr);
        }

        switch (type) {
        case RTE_DEV_EVENT_REMOVE:
                RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n",
                        device_name);
                ret = rte_eth_dev_get_port_by_name(device_name, &port_id);
                if (ret) {
                        RTE_LOG(ERR, EAL, "can not get port by device %s!\n",
                                device_name);
                        return;
                }
                /*
                 * Because the user's callback is invoked in eal interrupt
                 * callback, the interrupt callback need to be finished before
                 * it can be unregistered when detaching device. So finish
                 * callback soon and use a deferred removal to detach device
                 * is need. It is a workaround, once the device detaching be
                 * moved into the eal in the future, the deferred removal could
                 * be deleted.
                 */
                if (rte_eal_alarm_set(100000,
                                rmv_port_callback, (void *)(intptr_t)port_id))
                        RTE_LOG(ERR, EAL,
                                "Could not set up deferred device removal\n");
                break;
        case RTE_DEV_EVENT_ADD:
                RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
                        device_name);
                /* TODO: After finish kernel driver binding,
                 * begin to attach port.
                 */
                break;
        default:
                break;
        }
}

static int
set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
        uint16_t i;
        int diag;
        uint8_t mapping_found = 0;

        for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
                if ((tx_queue_stats_mappings[i].port_id == port_id) &&
                                (tx_queue_stats_mappings[i].queue_id < nb_txq )) {
                        diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
                                        tx_queue_stats_mappings[i].queue_id,
                                        tx_queue_stats_mappings[i].stats_counter_id);
                        if (diag != 0)
                                return diag;
                        mapping_found = 1;
                }
        }
        if (mapping_found)
                port->tx_queue_stats_mapping_enabled = 1;
        return 0;
}

static int
set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
        uint16_t i;
        int diag;
        uint8_t mapping_found = 0;

        for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
                if ((rx_queue_stats_mappings[i].port_id == port_id) &&
                                (rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
                        diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
                                        rx_queue_stats_mappings[i].queue_id,
                                        rx_queue_stats_mappings[i].stats_counter_id);
                        if (diag != 0)
                                return diag;
                        mapping_found = 1;
                }
        }
        if (mapping_found)
                port->rx_queue_stats_mapping_enabled = 1;
        return 0;
}

static void
map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
{
        int diag = 0;

        diag = set_tx_queue_stats_mapping_registers(pi, port);
        if (diag != 0) {
                if (diag == -ENOTSUP) {
                        port->tx_queue_stats_mapping_enabled = 0;
                        printf("TX queue stats mapping not supported port id=%d\n", pi);
                }
                else
                        rte_exit(EXIT_FAILURE,
                                        "set_tx_queue_stats_mapping_registers "
                                        "failed for port id=%d diag=%d\n",
                                        pi, diag);
        }

        diag = set_rx_queue_stats_mapping_registers(pi, port);
        if (diag != 0) {
                if (diag == -ENOTSUP) {
                        port->rx_queue_stats_mapping_enabled = 0;
                        printf("RX queue stats mapping not supported port id=%d\n", pi);
                }
                else
                        rte_exit(EXIT_FAILURE,
                                        "set_rx_queue_stats_mapping_registers "
                                        "failed for port id=%d diag=%d\n",
                                        pi, diag);
        }
}

static void
rxtx_port_config(struct rte_port *port)
{
        uint16_t qid;
        uint64_t offloads;

        for (qid = 0; qid < nb_rxq; qid++) {
                offloads = port->rx_conf[qid].offloads;
                port->rx_conf[qid] = port->dev_info.default_rxconf;
                if (offloads != 0)
                        port->rx_conf[qid].offloads = offloads;

                /* Check if any Rx parameters have been passed */
                if (rx_pthresh != RTE_PMD_PARAM_UNSET)
                        port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh;

                if (rx_hthresh != RTE_PMD_PARAM_UNSET)
                        port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh;

                if (rx_wthresh != RTE_PMD_PARAM_UNSET)
                        port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh;

                if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
                        port->rx_conf[qid].rx_free_thresh = rx_free_thresh;

                if (rx_drop_en != RTE_PMD_PARAM_UNSET)
                        port->rx_conf[qid].rx_drop_en = rx_drop_en;

                port->nb_rx_desc[qid] = nb_rxd;
        }

        for (qid = 0; qid < nb_txq; qid++) {
                offloads = port->tx_conf[qid].offloads;
                port->tx_conf[qid] = port->dev_info.default_txconf;
                if (offloads != 0)
                        port->tx_conf[qid].offloads = offloads;

                /* Check if any Tx parameters have been passed */
                if (tx_pthresh != RTE_PMD_PARAM_UNSET)
                        port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh;

                if (tx_hthresh != RTE_PMD_PARAM_UNSET)
                        port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh;

                if (tx_wthresh != RTE_PMD_PARAM_UNSET)
                        port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh;

                if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
                        port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh;

                if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
                        port->tx_conf[qid].tx_free_thresh = tx_free_thresh;

                port->nb_tx_desc[qid] = nb_txd;
        }
}

void
init_port_config(void)
{
        portid_t pid;
        struct rte_port *port;
        int ret;

        RTE_ETH_FOREACH_DEV(pid) {
                port = &ports[pid];
                port->dev_conf.fdir_conf = fdir_conf;

                ret = eth_dev_info_get_print_err(pid, &port->dev_info);
                if (ret != 0)
                        return;

                if (nb_rxq > 1) {
                        port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
                        port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
                                rss_hf & port->dev_info.flow_type_rss_offloads;
                } else {
                        port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
                        port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
                }

                if (port->dcb_flag == 0) {
                        if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
                                port->dev_conf.rxmode.mq_mode =
                                        (enum rte_eth_rx_mq_mode)
                                                (rx_mq_mode & ETH_MQ_RX_RSS);
                        else
                                port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
                }

                rxtx_port_config(port);

                ret = eth_macaddr_get_print_err(pid, &port->eth_addr);
                if (ret != 0)
                        return;

                map_port_queue_stats_mapping_registers(pid, port);
#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
                rte_pmd_ixgbe_bypass_init(pid);
#endif

                if (lsc_interrupt &&
                    (rte_eth_devices[pid].data->dev_flags &
                     RTE_ETH_DEV_INTR_LSC))
                        port->dev_conf.intr_conf.lsc = 1;
                if (rmv_interrupt &&
                    (rte_eth_devices[pid].data->dev_flags &
                     RTE_ETH_DEV_INTR_RMV))
                        port->dev_conf.intr_conf.rmv = 1;
        }
}

void set_port_slave_flag(portid_t slave_pid)
{
        struct rte_port *port;

        port = &ports[slave_pid];
        port->slave_flag = 1;
}

void clear_port_slave_flag(portid_t slave_pid)
{
        struct rte_port *port;

        port = &ports[slave_pid];
        port->slave_flag = 0;
}

uint8_t port_is_bonding_slave(portid_t slave_pid)
{
        struct rte_port *port;

        port = &ports[slave_pid];
        if ((rte_eth_devices[slave_pid].data->dev_flags &
            RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
                return 1;
        return 0;
}

const uint16_t vlan_tags[] = {
                0,  1,  2,  3,  4,  5,  6,  7,
                8,  9, 10, 11,  12, 13, 14, 15,
                16, 17, 18, 19, 20, 21, 22, 23,
                24, 25, 26, 27, 28, 29, 30, 31
};

static  int
get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf,
                 enum dcb_mode_enable dcb_mode,
                 enum rte_eth_nb_tcs num_tcs,
                 uint8_t pfc_en)
{
        uint8_t i;
        int32_t rc;
        struct rte_eth_rss_conf rss_conf;

        /*
         * Builds up the correct configuration for dcb+vt based on the vlan tags array
         * given above, and the number of traffic classes available for use.
         */
        if (dcb_mode == DCB_VT_ENABLED) {
                struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf =
                                &eth_conf->rx_adv_conf.vmdq_dcb_conf;
                struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf =
                                &eth_conf->tx_adv_conf.vmdq_dcb_tx_conf;

                /* VMDQ+DCB RX and TX configurations */
                vmdq_rx_conf->enable_default_pool = 0;
                vmdq_rx_conf->default_pool = 0;
                vmdq_rx_conf->nb_queue_pools =
                        (num_tcs ==  ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
                vmdq_tx_conf->nb_queue_pools =
                        (num_tcs ==  ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);

                vmdq_rx_conf->nb_pool_maps = vmdq_rx_conf->nb_queue_pools;
                for (i = 0; i < vmdq_rx_conf->nb_pool_maps; i++) {
                        vmdq_rx_conf->pool_map[i].vlan_id = vlan_tags[i];
                        vmdq_rx_conf->pool_map[i].pools =
                                1 << (i % vmdq_rx_conf->nb_queue_pools);
                }
                for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
                        vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
                        vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
                }

                /* set DCB mode of RX and TX of multiple queues */
                eth_conf->rxmode.mq_mode =
                                (enum rte_eth_rx_mq_mode)
                                        (rx_mq_mode & ETH_MQ_RX_VMDQ_DCB);
                eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
        } else {
                struct rte_eth_dcb_rx_conf *rx_conf =
                                &eth_conf->rx_adv_conf.dcb_rx_conf;
                struct rte_eth_dcb_tx_conf *tx_conf =
                                &eth_conf->tx_adv_conf.dcb_tx_conf;

                memset(&rss_conf, 0, sizeof(struct rte_eth_rss_conf));

                rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
                if (rc != 0)
                        return rc;

                rx_conf->nb_tcs = num_tcs;
                tx_conf->nb_tcs = num_tcs;

                for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
                        rx_conf->dcb_tc[i] = i % num_tcs;
                        tx_conf->dcb_tc[i] = i % num_tcs;
                }

                eth_conf->rxmode.mq_mode =
                                (enum rte_eth_rx_mq_mode)
                                        (rx_mq_mode & ETH_MQ_RX_DCB_RSS);
                eth_conf->rx_adv_conf.rss_conf = rss_conf;
                eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
        }

        if (pfc_en)
                eth_conf->dcb_capability_en =
                                ETH_DCB_PG_SUPPORT | ETH_DCB_PFC_SUPPORT;
        else
                eth_conf->dcb_capability_en = ETH_DCB_PG_SUPPORT;

        return 0;
}

int
init_port_dcb_config(portid_t pid,
                     enum dcb_mode_enable dcb_mode,
                     enum rte_eth_nb_tcs num_tcs,
                     uint8_t pfc_en)
{
        struct rte_eth_conf port_conf;
        struct rte_port *rte_port;
        int retval;
        uint16_t i;

        rte_port = &ports[pid];

        memset(&port_conf, 0, sizeof(struct rte_eth_conf));
        /* Enter DCB configuration status */
        dcb_config = 1;

        port_conf.rxmode = rte_port->dev_conf.rxmode;
        port_conf.txmode = rte_port->dev_conf.txmode;

        /*set configuration of DCB in vt mode and DCB in non-vt mode*/
        retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
        if (retval < 0)
                return retval;
        port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;

        /* re-configure the device . */
        retval = rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
        if (retval < 0)
                return retval;

        retval = eth_dev_info_get_print_err(pid, &rte_port->dev_info);
        if (retval != 0)
                return retval;

        /* If dev_info.vmdq_pool_base is greater than 0,
         * the queue id of vmdq pools is started after pf queues.
         */
        if (dcb_mode == DCB_VT_ENABLED &&
            rte_port->dev_info.vmdq_pool_base > 0) {
                printf("VMDQ_DCB multi-queue mode is nonsensical"
                        " for port %d.", pid);
                return -1;
        }

        /* Assume the ports in testpmd have the same dcb capability
         * and has the same number of rxq and txq in dcb mode
         */
        if (dcb_mode == DCB_VT_ENABLED) {
                if (rte_port->dev_info.max_vfs > 0) {
                        nb_rxq = rte_port->dev_info.nb_rx_queues;
                        nb_txq = rte_port->dev_info.nb_tx_queues;
                } else {
                        nb_rxq = rte_port->dev_info.max_rx_queues;
                        nb_txq = rte_port->dev_info.max_tx_queues;
                }
        } else {
                /*if vt is disabled, use all pf queues */
                if (rte_port->dev_info.vmdq_pool_base == 0) {
                        nb_rxq = rte_port->dev_info.max_rx_queues;
                        nb_txq = rte_port->dev_info.max_tx_queues;
                } else {
                        nb_rxq = (queueid_t)num_tcs;
                        nb_txq = (queueid_t)num_tcs;

                }
        }
        rx_free_thresh = 64;

        memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));

        rxtx_port_config(rte_port);
        /* VLAN filter */
        rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
        for (i = 0; i < RTE_DIM(vlan_tags); i++)
                rx_vft_set(pid, vlan_tags[i], 1);

        retval = eth_macaddr_get_print_err(pid, &rte_port->eth_addr);
        if (retval != 0)
                return retval;

        map_port_queue_stats_mapping_registers(pid, rte_port);

        rte_port->dcb_flag = 1;

        return 0;
}

static void
init_port(void)
{
        int i;

        /* Configuration of Ethernet ports. */
        ports = rte_zmalloc("testpmd: ports",
                            sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
                            RTE_CACHE_LINE_SIZE);
        if (ports == NULL) {
                rte_exit(EXIT_FAILURE,
                                "rte_zmalloc(%d struct rte_port) failed\n",
                                RTE_MAX_ETHPORTS);
        }
        for (i = 0; i < RTE_MAX_ETHPORTS; i++)
                LIST_INIT(&ports[i].flow_tunnel_list);
        /* Initialize ports NUMA structures */
        memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
        memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
        memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
}

static void
force_quit(void)
{
        pmd_test_exit();
        prompt_exit();
}

static void
print_stats(void)
{
        uint8_t i;
        const char clr[] = { 27, '[', '2', 'J', '\0' };
        const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };

        /* Clear screen and move to top left */
        printf("%s%s", clr, top_left);

        printf("\nPort statistics ====================================");
        for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
                nic_stats_display(fwd_ports_ids[i]);

        fflush(stdout);
}

static void
signal_handler(int signum)
{
        if (signum == SIGINT || signum == SIGTERM) {
                printf("\nSignal %d received, preparing to exit...\n",
                                signum);
#ifdef RTE_LIB_PDUMP
                /* uninitialize packet capture framework */
                rte_pdump_uninit();
#endif
#ifdef RTE_LIB_LATENCYSTATS
                if (latencystats_enabled != 0)
                        rte_latencystats_uninit();
#endif
                force_quit();
                /* Set flag to indicate the force termination. */
                f_quit = 1;
                /* exit with the expected status */
                signal(signum, SIG_DFL);
                kill(getpid(), signum);
        }
}

int
main(int argc, char** argv)
{
        int diag;
        portid_t port_id;
        uint16_t count;
        int ret;

        signal(SIGINT, signal_handler);
        signal(SIGTERM, signal_handler);

        testpmd_logtype = rte_log_register("testpmd");
        if (testpmd_logtype < 0)
                rte_exit(EXIT_FAILURE, "Cannot register log type");
        rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);

        diag = rte_eal_init(argc, argv);
        if (diag < 0)
                rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n",
                         rte_strerror(rte_errno));

        if (rte_eal_process_type() == RTE_PROC_SECONDARY)
                rte_exit(EXIT_FAILURE,
                         "Secondary process type not supported.\n");

        ret = register_eth_event_callback();
        if (ret != 0)
                rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");

#ifdef RTE_LIB_PDUMP
        /* initialize packet capture framework */
        rte_pdump_init();
#endif

        count = 0;
        RTE_ETH_FOREACH_DEV(port_id) {
                ports_ids[count] = port_id;
                count++;
        }
        nb_ports = (portid_t) count;
        if (nb_ports == 0)
                TESTPMD_LOG(WARNING, "No probed ethernet devices\n");

        /* allocate port structures, and init them */
        init_port();

        set_def_fwd_config();
        if (nb_lcores == 0)
                rte_exit(EXIT_FAILURE, "No cores defined for forwarding\n"
                         "Check the core mask argument\n");

        /* Bitrate/latency stats disabled by default */
#ifdef RTE_LIB_BITRATESTATS
        bitrate_enabled = 0;
#endif
#ifdef RTE_LIB_LATENCYSTATS
        latencystats_enabled = 0;
#endif

        /* on FreeBSD, mlockall() is disabled by default */
#ifdef RTE_EXEC_ENV_FREEBSD
        do_mlockall = 0;
#else
        do_mlockall = 1;
#endif

        argc -= diag;
        argv += diag;
        if (argc > 1)
                launch_args_parse(argc, argv);

        if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
                TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
                        strerror(errno));
        }

        if (tx_first && interactive)
                rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
                                "interactive mode.\n");

        if (tx_first && lsc_interrupt) {
                printf("Warning: lsc_interrupt needs to be off when "
                                " using tx_first. Disabling.\n");
                lsc_interrupt = 0;
        }

        if (!nb_rxq && !nb_txq)
                printf("Warning: Either rx or tx queues should be non-zero\n");

        if (nb_rxq > 1 && nb_rxq > nb_txq)
                printf("Warning: nb_rxq=%d enables RSS configuration, "
                       "but nb_txq=%d will prevent to fully test it.\n",
                       nb_rxq, nb_txq);

        init_config();

        if (hot_plug) {
                ret = rte_dev_hotplug_handle_enable();
                if (ret) {
                        RTE_LOG(ERR, EAL,
                                "fail to enable hotplug handling.");
                        return -1;
                }

                ret = rte_dev_event_monitor_start();
                if (ret) {
                        RTE_LOG(ERR, EAL,
                                "fail to start device event monitoring.");
                        return -1;
                }

                ret = rte_dev_event_callback_register(NULL,
                        dev_event_callback, NULL);
                if (ret) {
                        RTE_LOG(ERR, EAL,
                                "fail  to register device event callback\n");
                        return -1;
                }
        }

        if (!no_device_start && start_port(RTE_PORT_ALL) != 0)
                rte_exit(EXIT_FAILURE, "Start ports failed\n");

        /* set all ports to promiscuous mode by default */
        RTE_ETH_FOREACH_DEV(port_id) {
                ret = rte_eth_promiscuous_enable(port_id);
                if (ret != 0)
                        printf("Error during enabling promiscuous mode for port %u: %s - ignore\n",
                                port_id, rte_strerror(-ret));
        }

        /* Init metrics library */
        rte_metrics_init(rte_socket_id());

#ifdef RTE_LIB_LATENCYSTATS
        if (latencystats_enabled != 0) {
                int ret = rte_latencystats_init(1, NULL);
                if (ret)
                        printf("Warning: latencystats init()"
                                " returned error %d\n", ret);
                printf("Latencystats running on lcore %d\n",
                        latencystats_lcore_id);
        }
#endif

        /* Setup bitrate stats */
#ifdef RTE_LIB_BITRATESTATS
        if (bitrate_enabled != 0) {
                bitrate_data = rte_stats_bitrate_create();
                if (bitrate_data == NULL)
                        rte_exit(EXIT_FAILURE,
                                "Could not allocate bitrate data.\n");
                rte_stats_bitrate_reg(bitrate_data);
        }
#endif

#ifdef RTE_LIB_CMDLINE
        if (strlen(cmdline_filename) != 0)
                cmdline_read_from_file(cmdline_filename);

        if (interactive == 1) {
                if (auto_start) {
                        printf("Start automatic packet forwarding\n");
                        start_packet_forwarding(0);
                }
                prompt();
                pmd_test_exit();
        } else
#endif
        {
                char c;
                int rc;

                f_quit = 0;

                printf("No commandline core given, start packet forwarding\n");
                start_packet_forwarding(tx_first);
                if (stats_period != 0) {
                        uint64_t prev_time = 0, cur_time, diff_time = 0;
                        uint64_t timer_period;

                        /* Convert to number of cycles */
                        timer_period = stats_period * rte_get_timer_hz();

                        while (f_quit == 0) {
                                cur_time = rte_get_timer_cycles();
                                diff_time += cur_time - prev_time;

                                if (diff_time >= timer_period) {
                                        print_stats();
                                        /* Reset the timer */
                                        diff_time = 0;
                                }
                                /* Sleep to avoid unnecessary checks */
                                prev_time = cur_time;
                                sleep(1);
                        }
                }

                printf("Press enter to exit\n");
                rc = read(0, &c, 1);
                pmd_test_exit();
                if (rc < 0)
                        return 1;
        }

        ret = rte_eal_cleanup();
        if (ret != 0)
                rte_exit(EXIT_FAILURE,
                         "EAL cleanup failed: %s\n", strerror(-ret));

        return EXIT_SUCCESS;
}