doc/guides/nics/features.rst

   1 ..  SPDX-License-Identifier: BSD-3-Clause
   2     Copyright(c) 2017 Intel Corporation.
   3
   4 Features Overview
   5 =================
   6
   7 This section explains the supported features that are listed in the
   8 :doc:`overview`.
   9
  10 As a guide to implementers it also shows the structs where the features are
  11 defined and the APIs that can be use to get/set the values.
  12
  13 Following tags used for feature details, these are from driver point of view:
  14
  15 ``[uses]``       : Driver uses some kind of input from the application.
  16
  17 ``[implements]`` : Driver implements a functionality.
  18
  19 ``[provides]``   : Driver provides some kind of data to the application. It is possible
  20 to provide data by implementing some function, but "provides" is used
  21 for cases where provided data can't be represented simply by a function.
  22
  23 ``[related]``    : Related API with that feature.
  24
  25
  26 .. _nic_features_speed_capabilities:
  27
  28 Speed capabilities
  29 ------------------
  30
  31 Supports getting the speed capabilities that the current device is capable of.
  32
  33 * **[provides] rte_eth_dev_info**: ``speed_capa:ETH_LINK_SPEED_*``.
  34 * **[related]  API**: ``rte_eth_dev_info_get()``.
  35
  36
  37 .. _nic_features_link_status:
  38
  39 Link status
  40 -----------
  41
  42 Supports getting the link speed, duplex mode and link state (up/down).
  43
  44 * **[implements] eth_dev_ops**: ``link_update``.
  45 * **[implements] rte_eth_dev_data**: ``dev_link``.
  46 * **[related]    API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
  47
  48
  49 .. _nic_features_link_status_event:
  50
  51 Link status event
  52 -----------------
  53
  54 Supports Link Status Change interrupts.
  55
  56 * **[uses]       user config**: ``dev_conf.intr_conf.lsc``.
  57 * **[uses]       rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_LSC``.
  58 * **[uses]       rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_LSC``.
  59 * **[implements] rte_eth_dev_data**: ``dev_link``.
  60 * **[provides]   rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_LSC``.
  61 * **[related]    API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
  62
  63
  64 .. _nic_features_removal_event:
  65
  66 Removal event
  67 -------------
  68
  69 Supports device removal interrupts.
  70
  71 * **[uses]     user config**: ``dev_conf.intr_conf.rmv``.
  72 * **[uses]     rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_RMV``.
  73 * **[uses]     rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_RMV``.
  74 * **[provides] rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_RMV``.
  75
  76
  77 .. _nic_features_queue_status_event:
  78
  79 Queue status event
  80 ------------------
  81
  82 Supports queue enable/disable events.
  83
  84 * **[uses] rte_eth_event_type**: ``RTE_ETH_EVENT_QUEUE_STATE``.
  85
  86
  87 .. _nic_features_rx_interrupt:
  88
  89 Rx interrupt
  90 ------------
  91
  92 Supports Rx interrupts.
  93
  94 * **[uses]       user config**: ``dev_conf.intr_conf.rxq``.
  95 * **[implements] eth_dev_ops**: ``rx_queue_intr_enable``, ``rx_queue_intr_disable``.
  96 * **[related]    API**: ``rte_eth_dev_rx_intr_enable()``, ``rte_eth_dev_rx_intr_disable()``.
  97
  98
  99 .. _nic_features_lock-free_tx_queue:
 100
 101 Lock-free Tx queue
 102 ------------------
 103
 104 If a PMD advertises DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
 105 invoke rte_eth_tx_burst() concurrently on the same Tx queue without SW lock.
 106
 107 * **[uses]    rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MT_LOCKFREE``.
 108 * **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MT_LOCKFREE``.
 109 * **[related]  API**: ``rte_eth_tx_burst()``.
 110
 111
 112 .. _nic_features_fast_mbuf_free:
 113
 114 Fast mbuf free
 115 --------------
 116
 117 Supports optimization for fast release of mbufs following successful Tx.
 118 Requires that per queue, all mbufs come from the same mempool and has refcnt = 1.
 119
 120 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
 121 * **[provides]   rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
 122
 123
 124 .. _nic_features_free_tx_mbuf_on_demand:
 125
 126 Free Tx mbuf on demand
 127 ----------------------
 128
 129 Supports freeing consumed buffers on a Tx ring.
 130
 131 * **[implements] eth_dev_ops**: ``tx_done_cleanup``.
 132 * **[related]    API**: ``rte_eth_tx_done_cleanup()``.
 133
 134
 135 .. _nic_features_queue_start_stop:
 136
 137 Queue start/stop
 138 ----------------
 139
 140 Supports starting/stopping a specific Rx/Tx queue of a port.
 141
 142 * **[implements] eth_dev_ops**: ``rx_queue_start``, ``rx_queue_stop``, ``tx_queue_start``,
 143   ``tx_queue_stop``.
 144 * **[related]    API**: ``rte_eth_dev_rx_queue_start()``, ``rte_eth_dev_rx_queue_stop()``,
 145   ``rte_eth_dev_tx_queue_start()``, ``rte_eth_dev_tx_queue_stop()``.
 146
 147
 148 .. _nic_features_mtu_update:
 149
 150 MTU update
 151 ----------
 152
 153 Supports updating port MTU.
 154
 155 * **[implements] eth_dev_ops**: ``mtu_set``.
 156 * **[implements] rte_eth_dev_data**: ``mtu``.
 157 * **[provides]   rte_eth_dev_info**: ``max_rx_pktlen``.
 158 * **[related]    API**: ``rte_eth_dev_set_mtu()``, ``rte_eth_dev_get_mtu()``.
 159
 160
 161 .. _nic_features_jumbo_frame:
 162
 163 Jumbo frame
 164 -----------
 165
 166 Supports Rx jumbo frames.
 167
 168 * **[uses]    rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_JUMBO_FRAME``.
 169   ``dev_conf.rxmode.max_rx_pkt_len``.
 170 * **[related] rte_eth_dev_info**: ``max_rx_pktlen``.
 171 * **[related] API**: ``rte_eth_dev_set_mtu()``.
 172
 173
 174 .. _nic_features_scattered_rx:
 175
 176 Scattered Rx
 177 ------------
 178
 179 Supports receiving segmented mbufs.
 180
 181 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SCATTER``.
 182 * **[implements] datapath**: ``Scattered Rx function``.
 183 * **[implements] rte_eth_dev_data**: ``scattered_rx``.
 184 * **[provides]   eth_dev_ops**: ``rxq_info_get:scattered_rx``.
 185 * **[related]    eth_dev_ops**: ``rx_pkt_burst``.
 186
 187
 188 .. _nic_features_buffer_split:
 189
 190 Buffer Split on Rx
 191 ------------------
 192
 193 Scatters the packets being received on specified boundaries to segmented mbufs.
 194
 195 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT``.
 196 * **[uses]       rte_eth_rxconf**: ``rx_conf.rx_seg, rx_conf.rx_nseg``.
 197 * **[implements] datapath**: ``Buffer Split functionality``.
 198 * **[provides]   rte_eth_dev_info**: ``rx_offload_capa:RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT``.
 199 * **[related] API**: ``rte_eth_rx_queue_setup()``.
 200
 201
 202 .. _nic_features_lro:
 203
 204 LRO
 205 ---
 206
 207 Supports Large Receive Offload.
 208
 209 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TCP_LRO``.
 210   ``dev_conf.rxmode.max_lro_pkt_size``.
 211 * **[implements] datapath**: ``LRO functionality``.
 212 * **[implements] rte_eth_dev_data**: ``lro``.
 213 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_LRO``, ``mbuf.tso_segsz``.
 214 * **[provides]   rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_TCP_LRO``.
 215 * **[provides]   rte_eth_dev_info**: ``max_lro_pkt_size``.
 216
 217
 218 .. _nic_features_tso:
 219
 220 TSO
 221 ---
 222
 223 Supports TCP Segmentation Offloading.
 224
 225 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_TCP_TSO``.
 226 * **[uses]       rte_eth_desc_lim**: ``nb_seg_max``, ``nb_mtu_seg_max``.
 227 * **[uses]       mbuf**: ``mbuf.ol_flags:`` ``PKT_TX_TCP_SEG``, ``PKT_TX_IPV4``, ``PKT_TX_IPV6``, ``PKT_TX_IP_CKSUM``.
 228 * **[uses]       mbuf**: ``mbuf.tso_segsz``, ``mbuf.l2_len``, ``mbuf.l3_len``, ``mbuf.l4_len``.
 229 * **[implements] datapath**: ``TSO functionality``.
 230 * **[provides]   rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_TCP_TSO,DEV_TX_OFFLOAD_UDP_TSO``.
 231
 232
 233 .. _nic_features_promiscuous_mode:
 234
 235 Promiscuous mode
 236 ----------------
 237
 238 Supports enabling/disabling promiscuous mode for a port.
 239
 240 * **[implements] eth_dev_ops**: ``promiscuous_enable``, ``promiscuous_disable``.
 241 * **[implements] rte_eth_dev_data**: ``promiscuous``.
 242 * **[related]    API**: ``rte_eth_promiscuous_enable()``, ``rte_eth_promiscuous_disable()``,
 243   ``rte_eth_promiscuous_get()``.
 244
 245
 246 .. _nic_features_allmulticast_mode:
 247
 248 Allmulticast mode
 249 -----------------
 250
 251 Supports enabling/disabling receiving multicast frames.
 252
 253 * **[implements] eth_dev_ops**: ``allmulticast_enable``, ``allmulticast_disable``.
 254 * **[implements] rte_eth_dev_data**: ``all_multicast``.
 255 * **[related]    API**: ``rte_eth_allmulticast_enable()``,
 256   ``rte_eth_allmulticast_disable()``, ``rte_eth_allmulticast_get()``.
 257
 258
 259 .. _nic_features_unicast_mac_filter:
 260
 261 Unicast MAC filter
 262 ------------------
 263
 264 Supports adding MAC addresses to enable incoming filtering of packets.
 265
 266 * **[implements] eth_dev_ops**: ``mac_addr_set``, ``mac_addr_add``, ``mac_addr_remove``.
 267 * **[implements] rte_eth_dev_data**: ``mac_addrs``.
 268 * **[related]    API**: ``rte_eth_dev_default_mac_addr_set()``,
 269   ``rte_eth_dev_mac_addr_add()``, ``rte_eth_dev_mac_addr_remove()``,
 270   ``rte_eth_macaddr_get()``.
 271
 272
 273 .. _nic_features_multicast_mac_filter:
 274
 275 Multicast MAC filter
 276 --------------------
 277
 278 Supports setting multicast addresses to filter.
 279
 280 * **[implements] eth_dev_ops**: ``set_mc_addr_list``.
 281 * **[related]    API**: ``rte_eth_dev_set_mc_addr_list()``.
 282
 283
 284 .. _nic_features_rss_hash:
 285
 286 RSS hash
 287 --------
 288
 289 Supports RSS hashing on RX.
 290
 291 * **[uses]     user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_RSS_FLAG``.
 292 * **[uses]     user config**: ``dev_conf.rx_adv_conf.rss_conf``.
 293 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_RSS_HASH``.
 294 * **[provides] rte_eth_dev_info**: ``flow_type_rss_offloads``.
 295 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
 296
 297
 298 .. _nic_features_inner_rss:
 299
 300 Inner RSS
 301 ---------
 302
 303 Supports RX RSS hashing on Inner headers.
 304
 305 * **[uses]    rte_flow_action_rss**: ``level``.
 306 * **[uses]    rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_RSS_HASH``.
 307 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
 308
 309
 310 .. _nic_features_rss_key_update:
 311
 312 RSS key update
 313 --------------
 314
 315 Supports configuration of Receive Side Scaling (RSS) hash computation. Updating
 316 Receive Side Scaling (RSS) hash key.
 317
 318 * **[implements] eth_dev_ops**: ``rss_hash_update``, ``rss_hash_conf_get``.
 319 * **[provides]   rte_eth_dev_info**: ``hash_key_size``.
 320 * **[related]    API**: ``rte_eth_dev_rss_hash_update()``,
 321   ``rte_eth_dev_rss_hash_conf_get()``.
 322
 323
 324 .. _nic_features_rss_reta_update:
 325
 326 RSS reta update
 327 ---------------
 328
 329 Supports updating Redirection Table of the Receive Side Scaling (RSS).
 330
 331 * **[implements] eth_dev_ops**: ``reta_update``, ``reta_query``.
 332 * **[provides]   rte_eth_dev_info**: ``reta_size``.
 333 * **[related]    API**: ``rte_eth_dev_rss_reta_update()``, ``rte_eth_dev_rss_reta_query()``.
 334
 335
 336 .. _nic_features_vmdq:
 337
 338 VMDq
 339 ----
 340
 341 Supports Virtual Machine Device Queues (VMDq).
 342
 343 * **[uses] user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_VMDQ_FLAG``.
 344 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
 345 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_rx_conf``.
 346 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
 347 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
 348
 349
 350 .. _nic_features_sriov:
 351
 352 SR-IOV
 353 ------
 354
 355 Driver supports creating Virtual Functions.
 356
 357 * **[implements] rte_eth_dev_data**: ``sriov``.
 358
 359 .. _nic_features_dcb:
 360
 361 DCB
 362 ---
 363
 364 Supports Data Center Bridging (DCB).
 365
 366 * **[uses]       user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_DCB_FLAG``.
 367 * **[uses]       user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
 368 * **[uses]       user config**: ``dev_conf.rx_adv_conf.dcb_rx_conf``.
 369 * **[uses]       user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
 370 * **[uses]       user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
 371 * **[implements] eth_dev_ops**: ``get_dcb_info``.
 372 * **[related]    API**: ``rte_eth_dev_get_dcb_info()``.
 373
 374
 375 .. _nic_features_vlan_filter:
 376
 377 VLAN filter
 378 -----------
 379
 380 Supports filtering of a VLAN Tag identifier.
 381
 382 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_FILTER``.
 383 * **[implements] eth_dev_ops**: ``vlan_filter_set``.
 384 * **[related]    API**: ``rte_eth_dev_vlan_filter()``.
 385
 386
 387 .. _nic_features_flow_control:
 388
 389 Flow control
 390 ------------
 391
 392 Supports configuring link flow control.
 393
 394 * **[implements] eth_dev_ops**: ``flow_ctrl_get``, ``flow_ctrl_set``,
 395   ``priority_flow_ctrl_set``.
 396 * **[related]    API**: ``rte_eth_dev_flow_ctrl_get()``, ``rte_eth_dev_flow_ctrl_set()``,
 397   ``rte_eth_dev_priority_flow_ctrl_set()``.
 398
 399
 400 .. _nic_features_rate_limitation:
 401
 402 Rate limitation
 403 ---------------
 404
 405 Supports Tx rate limitation for a queue.
 406
 407 * **[implements] eth_dev_ops**: ``set_queue_rate_limit``.
 408 * **[related]    API**: ``rte_eth_set_queue_rate_limit()``.
 409
 410
 411 .. _nic_features_inline_crypto_doc:
 412
 413 Inline crypto
 414 -------------
 415
 416 Supports inline crypto processing defined by rte_security library to perform crypto
 417 operations of security protocol while packet is received in NIC. NIC is not aware
 418 of protocol operations. See Security library and PMD documentation for more details.
 419
 420 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SECURITY``,
 421 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_SECURITY``.
 422 * **[uses]       mbuf**: ``mbuf.l2_len``.
 423 * **[implements] rte_security_ops**: ``session_create``, ``session_update``,
 424   ``session_stats_get``, ``session_destroy``, ``set_pkt_metadata``, ``capabilities_get``.
 425 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_SECURITY``,
 426   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_SECURITY``.
 427 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD``,
 428   ``mbuf.ol_flags:PKT_TX_SEC_OFFLOAD``, ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD_FAILED``.
 429 * **[provides]   rte_security_ops, capabilities_get**:  ``action: RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO``
 430
 431
 432 .. _nic_features_inline_protocol_doc:
 433
 434 Inline protocol
 435 ---------------
 436
 437 Supports inline protocol processing defined by rte_security library to perform
 438 protocol processing for the security protocol (e.g. IPsec, MACSEC) while the
 439 packet is received at NIC. The NIC is capable of understanding the security
 440 protocol operations. See security library and PMD documentation for more details.
 441
 442 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SECURITY``,
 443 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_SECURITY``.
 444 * **[uses]       mbuf**: ``mbuf.l2_len``.
 445 * **[implements] rte_security_ops**: ``session_create``, ``session_update``,
 446   ``session_stats_get``, ``session_destroy``, ``set_pkt_metadata``, ``get_userdata``,
 447   ``capabilities_get``.
 448 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_SECURITY``,
 449   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_SECURITY``.
 450 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD``,
 451   ``mbuf.ol_flags:PKT_TX_SEC_OFFLOAD``, ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD_FAILED``.
 452 * **[provides]   rte_security_ops, capabilities_get**:  ``action: RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL``
 453
 454
 455 .. _nic_features_crc_offload:
 456
 457 CRC offload
 458 -----------
 459
 460 Supports CRC stripping by hardware.
 461 A PMD assumed to support CRC stripping by default. PMD should advertise if it supports keeping CRC.
 462
 463 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_KEEP_CRC``.
 464
 465
 466 .. _nic_features_vlan_offload:
 467
 468 VLAN offload
 469 ------------
 470
 471 Supports VLAN offload to hardware.
 472
 473 * **[uses]       rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_STRIP,DEV_RX_OFFLOAD_VLAN_FILTER,DEV_RX_OFFLOAD_VLAN_EXTEND``.
 474 * **[uses]       rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_VLAN_INSERT``.
 475 * **[uses]       mbuf**: ``mbuf.ol_flags:PKT_TX_VLAN``, ``mbuf.vlan_tci``.
 476 * **[implements] eth_dev_ops**: ``vlan_offload_set``.
 477 * **[provides]   mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN`` ``mbuf.vlan_tci``.
 478 * **[provides]   rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
 479   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
 480 * **[related]    API**: ``rte_eth_dev_set_vlan_offload()``,
 481   ``rte_eth_dev_get_vlan_offload()``.
 482
 483
 484 .. _nic_features_qinq_offload:
 485
 486 QinQ offload
 487 ------------
 488
 489 Supports QinQ (queue in queue) offload.
 490
 491 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_QINQ_STRIP``.
 492 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_QINQ_INSERT``.
 493 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_QINQ``, ``mbuf.vlan_tci_outer``.
 494 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.ol_flags:PKT_RX_QINQ``,
 495   ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN``
 496   ``mbuf.vlan_tci``, ``mbuf.vlan_tci_outer``.
 497 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
 498   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
 499
 500
 501 .. _nic_features_fec:
 502
 503 FEC
 504 ---
 505
 506 Supports Forward error correction. Forward error correction (FEC) is a bit error correction mode.
 507 It adds error correction information to data packets at the transmit end, and uses the error correction
 508 information to correct the bit errors generated during data packet transmission at the receive end. This
 509 improves signal quality but also brings a delay to signals. This function can be enabled or disabled as required.
 510
 511 * **[implements] eth_dev_ops**: ``fec_get_capability``, ``fec_get``, ``fec_set``.
 512 * **[provides]   rte_eth_fec_capa**: ``speed:ETH_SPEED_NUM_*``, ``capa:RTE_ETH_FEC_MODE_TO_CAPA()``.
 513 * **[related]    API**: ``rte_eth_fec_get_capability()``, ``rte_eth_fec_get()``, ``rte_eth_fec_set()``.
 514
 515
 516 .. _nic_features_l3_checksum_offload:
 517
 518 L3 checksum offload
 519 -------------------
 520
 521 Supports L3 checksum offload.
 522
 523 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_IPV4_CKSUM``.
 524 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_IPV4_CKSUM``.
 525 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
 526   ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``.
 527 * **[uses]     mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
 528 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_IP_CKSUM_UNKNOWN`` |
 529   ``PKT_RX_IP_CKSUM_BAD`` | ``PKT_RX_IP_CKSUM_GOOD`` |
 530   ``PKT_RX_IP_CKSUM_NONE``.
 531 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_IPV4_CKSUM``,
 532   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_IPV4_CKSUM``.
 533
 534
 535 .. _nic_features_l4_checksum_offload:
 536
 537 L4 checksum offload
 538 -------------------
 539
 540 Supports L4 checksum offload.
 541
 542 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``.
 543 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
 544 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
 545   ``mbuf.ol_flags:PKT_TX_L4_NO_CKSUM`` | ``PKT_TX_TCP_CKSUM`` |
 546   ``PKT_TX_SCTP_CKSUM`` | ``PKT_TX_UDP_CKSUM``.
 547 * **[uses]     mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
 548 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_L4_CKSUM_UNKNOWN`` |
 549   ``PKT_RX_L4_CKSUM_BAD`` | ``PKT_RX_L4_CKSUM_GOOD`` |
 550   ``PKT_RX_L4_CKSUM_NONE``.
 551 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``,
 552   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
 553
 554 .. _nic_features_hw_timestamp:
 555
 556 Timestamp offload
 557 -----------------
 558
 559 Supports Timestamp.
 560
 561 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TIMESTAMP``.
 562 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
 563 * **[provides] mbuf**: ``mbuf.timestamp``.
 564 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
 565 * **[related] eth_dev_ops**: ``read_clock``.
 566
 567 .. _nic_features_macsec_offload:
 568
 569 MACsec offload
 570 --------------
 571
 572 Supports MACsec.
 573
 574 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_MACSEC_STRIP``.
 575 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MACSEC_INSERT``.
 576 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_MACSEC``.
 577 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_MACSEC_STRIP``,
 578   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MACSEC_INSERT``.
 579
 580
 581 .. _nic_features_inner_l3_checksum:
 582
 583 Inner L3 checksum
 584 -----------------
 585
 586 Supports inner packet L3 checksum.
 587
 588 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``.
 589 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
 590 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
 591   ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
 592   ``mbuf.ol_flags:PKT_TX_OUTER_IP_CKSUM``,
 593   ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
 594 * **[uses]     mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
 595 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_OUTER_IP_CKSUM_BAD``.
 596 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``,
 597   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
 598
 599
 600 .. _nic_features_inner_l4_checksum:
 601
 602 Inner L4 checksum
 603 -----------------
 604
 605 Supports inner packet L4 checksum.
 606
 607 * **[uses]     rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``.
 608 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_OUTER_L4_CKSUM_UNKNOWN`` |
 609   ``PKT_RX_OUTER_L4_CKSUM_BAD`` | ``PKT_RX_OUTER_L4_CKSUM_GOOD`` | ``PKT_RX_OUTER_L4_CKSUM_INVALID``.
 610 * **[uses]     rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
 611 * **[uses]     mbuf**: ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
 612   ``mbuf.ol_flags:PKT_TX_OUTER_UDP_CKSUM``.
 613 * **[uses]     mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
 614 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``,
 615   ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
 616
 617
 618 .. _nic_features_packet_type_parsing:
 619
 620 Packet type parsing
 621 -------------------
 622
 623 Supports packet type parsing and returns a list of supported types.
 624 Allows application to set ptypes it is interested in.
 625
 626 * **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
 627 * **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``,
 628   ``rte_eth_dev_set_ptypes()``, ``dev_ptypes_set``.
 629 * **[provides]   mbuf**: ``mbuf.packet_type``.
 630
 631
 632 .. _nic_features_timesync:
 633
 634 Timesync
 635 --------
 636
 637 Supports IEEE1588/802.1AS timestamping.
 638
 639 * **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
 640   ``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
 641   ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
 642 * **[related]    API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
 643   ``rte_eth_timesync_read_rx_timestamp()``,
 644   ``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
 645   ``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
 646
 647
 648 .. _nic_features_rx_descriptor_status:
 649
 650 Rx descriptor status
 651 --------------------
 652
 653 Supports check the status of a Rx descriptor. When ``rx_descriptor_status`` is
 654 used, status can be "Available", "Done" or "Unavailable".
 655
 656 * **[implements] rte_eth_dev**: ``rx_descriptor_status``.
 657 * **[related]    API**: ``rte_eth_rx_descriptor_status()``.
 658
 659
 660 .. _nic_features_tx_descriptor_status:
 661
 662 Tx descriptor status
 663 --------------------
 664
 665 Supports checking the status of a Tx descriptor. Status can be "Full", "Done"
 666 or "Unavailable."
 667
 668 * **[implements] rte_eth_dev**: ``tx_descriptor_status``.
 669 * **[related]    API**: ``rte_eth_tx_descriptor_status()``.
 670
 671
 672 .. _nic_features_basic_stats:
 673
 674 Basic stats
 675 -----------
 676
 677 Support basic statistics such as: ipackets, opackets, ibytes, obytes,
 678 imissed, ierrors, oerrors, rx_nombuf.
 679
 680 And per queue stats: q_ipackets, q_opackets, q_ibytes, q_obytes, q_errors.
 681
 682 These apply to all drivers.
 683
 684 * **[implements] eth_dev_ops**: ``stats_get``, ``stats_reset``.
 685 * **[related]    API**: ``rte_eth_stats_get``, ``rte_eth_stats_reset()``.
 686
 687
 688 .. _nic_features_extended_stats:
 689
 690 Extended stats
 691 --------------
 692
 693 Supports Extended Statistics, changes from driver to driver.
 694
 695 * **[implements] eth_dev_ops**: ``xstats_get``, ``xstats_reset``, ``xstats_get_names``.
 696 * **[implements] eth_dev_ops**: ``xstats_get_by_id``, ``xstats_get_names_by_id``.
 697 * **[related]    API**: ``rte_eth_xstats_get()``, ``rte_eth_xstats_reset()``,
 698   ``rte_eth_xstats_get_names``, ``rte_eth_xstats_get_by_id()``,
 699   ``rte_eth_xstats_get_names_by_id()``, ``rte_eth_xstats_get_id_by_name()``.
 700
 701
 702 .. _nic_features_stats_per_queue:
 703
 704 Stats per queue
 705 ---------------
 706
 707 Supports configuring per-queue stat counter mapping.
 708
 709 * **[implements] eth_dev_ops**: ``queue_stats_mapping_set``.
 710 * **[related]    API**: ``rte_eth_dev_set_rx_queue_stats_mapping()``,
 711   ``rte_eth_dev_set_tx_queue_stats_mapping()``.
 712
 713
 714 .. _nic_features_fw_version:
 715
 716 FW version
 717 ----------
 718
 719 Supports getting device hardware firmware information.
 720
 721 * **[implements] eth_dev_ops**: ``fw_version_get``.
 722 * **[related]    API**: ``rte_eth_dev_fw_version_get()``.
 723
 724
 725 .. _nic_features_eeprom_dump:
 726
 727 EEPROM dump
 728 -----------
 729
 730 Supports getting/setting device eeprom data.
 731
 732 * **[implements] eth_dev_ops**: ``get_eeprom_length``, ``get_eeprom``, ``set_eeprom``.
 733 * **[related]    API**: ``rte_eth_dev_get_eeprom_length()``, ``rte_eth_dev_get_eeprom()``,
 734   ``rte_eth_dev_set_eeprom()``.
 735
 736
 737 .. _nic_features_module_eeprom_dump:
 738
 739 Module EEPROM dump
 740 ------------------
 741
 742 Supports getting information and data of plugin module eeprom.
 743
 744 * **[implements] eth_dev_ops**: ``get_module_info``, ``get_module_eeprom``.
 745 * **[related]    API**: ``rte_eth_dev_get_module_info()``, ``rte_eth_dev_get_module_eeprom()``.
 746
 747
 748 .. _nic_features_register_dump:
 749
 750 Registers dump
 751 --------------
 752
 753 Supports retrieving device registers and registering attributes (number of
 754 registers and register size).
 755
 756 * **[implements] eth_dev_ops**: ``get_reg``.
 757 * **[related]    API**: ``rte_eth_dev_get_reg_info()``.
 758
 759
 760 .. _nic_features_led:
 761
 762 LED
 763 ---
 764
 765 Supports turning on/off a software controllable LED on a device.
 766
 767 * **[implements] eth_dev_ops**: ``dev_led_on``, ``dev_led_off``.
 768 * **[related]    API**: ``rte_eth_led_on()``, ``rte_eth_led_off()``.
 769
 770
 771 .. _nic_features_multiprocess_aware:
 772
 773 Multiprocess aware
 774 ------------------
 775
 776 Driver can be used for primary-secondary process model.
 777
 778
 779 .. _nic_features_freebsd:
 780
 781 FreeBSD
 782 -------
 783
 784 Supports running on FreeBSD.
 785
 786
 787 .. _nic_features_linux:
 788
 789 Linux
 790 -----
 791
 792 Supports running on Linux.
 793
 794
 795 .. _nic_features_windows:
 796
 797 Windows
 798 -------
 799
 800 Supports running on Windows.
 801
 802
 803 .. _nic_features_armv7:
 804
 805 ARMv7
 806 -----
 807
 808 Support armv7 architecture.
 809
 810
 811 .. _nic_features_armv8:
 812
 813 ARMv8
 814 -----
 815
 816 Support armv8a (64bit) architecture.
 817
 818
 819 .. _nic_features_power8:
 820
 821 Power8
 822 ------
 823
 824 Support PowerPC architecture.
 825
 826
 827 .. _nic_features_x86-32:
 828
 829 x86-32
 830 ------
 831
 832 Support 32bits x86 architecture.
 833
 834
 835 .. _nic_features_x86-64:
 836
 837 x86-64
 838 ------
 839
 840 Support 64bits x86 architecture.
 841
 842
 843 .. _nic_features_usage_doc:
 844
 845 Usage doc
 846 ---------
 847
 848 Documentation describes usage.
 849
 850 See ``doc/guides/nics/*.rst``
 851
 852
 853 .. _nic_features_design_doc:
 854
 855 Design doc
 856 ----------
 857
 858 Documentation describes design.
 859
 860 See ``doc/guides/nics/*.rst``.
 861
 862
 863 .. _nic_features_perf_doc:
 864
 865 Perf doc
 866 --------
 867
 868 Documentation describes performance values.
 869
 870 See ``dpdk.org/doc/perf/*``.
 871
 872 .. _nic_features_runtime_rx_queue_setup:
 873
 874 Runtime Rx queue setup
 875 ----------------------
 876
 877 Supports Rx queue setup after device started.
 878
 879 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP``.
 880 * **[related]  API**: ``rte_eth_dev_info_get()``.
 881
 882 .. _nic_features_runtime_tx_queue_setup:
 883
 884 Runtime Tx queue setup
 885 ----------------------
 886
 887 Supports Tx queue setup after device started.
 888
 889 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP``.
 890 * **[related]  API**: ``rte_eth_dev_info_get()``.
 891
 892 .. _nic_features_burst_mode_info:
 893
 894 Burst mode info
 895 ---------------
 896
 897 Supports to get Rx/Tx packet burst mode information.
 898
 899 * **[implements] eth_dev_ops**: ``rx_burst_mode_get``, ``tx_burst_mode_get``.
 900 * **[related] API**: ``rte_eth_rx_burst_mode_get()``, ``rte_eth_tx_burst_mode_get()``.
 901
 902 .. _nic_features_get_monitor_addr:
 903
 904 PMD power management using monitor addresses
 905 --------------------------------------------
 906
 907 Supports getting a monitoring condition to use together with Ethernet PMD power
 908 management (see :doc:`../prog_guide/power_man` for more details).
 909
 910 * **[implements] eth_dev_ops**: ``get_monitor_addr``
 911
 912 .. _nic_features_other:
 913
 914 Other dev ops not represented by a Feature
 915 ------------------------------------------
 916
 917 * ``rxq_info_get``
 918 * ``txq_info_get``
 919 * ``vlan_tpid_set``
 920 * ``vlan_strip_queue_set``
 921 * ``vlan_pvid_set``
 922 * ``rx_queue_count``
 923 * ``uc_hash_table_set``
 924 * ``uc_all_hash_table_set``
 925 * ``udp_tunnel_port_add``
 926 * ``udp_tunnel_port_del``
 927 * ``tx_pkt_prepare``