drivers/common/mlx5/mlx5_devx_cmds.c

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /* Copyright 2018 Mellanox Technologies, Ltd */
   3
   4 #include <unistd.h>
   5
   6 #include <rte_errno.h>
   7 #include <rte_malloc.h>
   8 #include <rte_eal_paging.h>
   9
  10 #include "mlx5_prm.h"
  11 #include "mlx5_devx_cmds.h"
  12 #include "mlx5_common_utils.h"
  13 #include "mlx5_malloc.h"
  14
  15
  16 /**
  17  * Perform read access to the registers. Reads data from register
  18  * and writes ones to the specified buffer.
  19  *
  20  * @param[in] ctx
  21  *   Context returned from mlx5 open_device() glue function.
  22  * @param[in] reg_id
  23  *   Register identifier according to the PRM.
  24  * @param[in] arg
  25  *   Register access auxiliary parameter according to the PRM.
  26  * @param[out] data
  27  *   Pointer to the buffer to store read data.
  28  * @param[in] dw_cnt
  29  *   Buffer size in double words.
  30  *
  31  * @return
  32  *   0 on success, a negative value otherwise.
  33  */
  34 int
  35 mlx5_devx_cmd_register_read(void *ctx, uint16_t reg_id, uint32_t arg,
  36                             uint32_t *data, uint32_t dw_cnt)
  37 {
  38         uint32_t in[MLX5_ST_SZ_DW(access_register_in)]   = {0};
  39         uint32_t out[MLX5_ST_SZ_DW(access_register_out) +
  40                      MLX5_ACCESS_REGISTER_DATA_DWORD_MAX] = {0};
  41         int status, rc;
  42
  43         MLX5_ASSERT(data && dw_cnt);
  44         MLX5_ASSERT(dw_cnt <= MLX5_ACCESS_REGISTER_DATA_DWORD_MAX);
  45         if (dw_cnt  > MLX5_ACCESS_REGISTER_DATA_DWORD_MAX) {
  46                 DRV_LOG(ERR, "Not enough  buffer for register read data");
  47                 return -1;
  48         }
  49         MLX5_SET(access_register_in, in, opcode,
  50                  MLX5_CMD_OP_ACCESS_REGISTER_USER);
  51         MLX5_SET(access_register_in, in, op_mod,
  52                                         MLX5_ACCESS_REGISTER_IN_OP_MOD_READ);
  53         MLX5_SET(access_register_in, in, register_id, reg_id);
  54         MLX5_SET(access_register_in, in, argument, arg);
  55         rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out,
  56                                          MLX5_ST_SZ_DW(access_register_out) *
  57                                          sizeof(uint32_t) + dw_cnt);
  58         if (rc)
  59                 goto error;
  60         status = MLX5_GET(access_register_out, out, status);
  61         if (status) {
  62                 int syndrome = MLX5_GET(access_register_out, out, syndrome);
  63
  64                 DRV_LOG(DEBUG, "Failed to access NIC register 0x%X, "
  65                                "status %x, syndrome = %x",
  66                                reg_id, status, syndrome);
  67                 return -1;
  68         }
  69         memcpy(data, &out[MLX5_ST_SZ_DW(access_register_out)],
  70                dw_cnt * sizeof(uint32_t));
  71         return 0;
  72 error:
  73         rc = (rc > 0) ? -rc : rc;
  74         return rc;
  75 }
  76
  77 /**
  78  * Allocate flow counters via devx interface.
  79  *
  80  * @param[in] ctx
  81  *   Context returned from mlx5 open_device() glue function.
  82  * @param dcs
  83  *   Pointer to counters properties structure to be filled by the routine.
  84  * @param bulk_n_128
  85  *   Bulk counter numbers in 128 counters units.
  86  *
  87  * @return
  88  *   Pointer to counter object on success, a negative value otherwise and
  89  *   rte_errno is set.
  90  */
  91 struct mlx5_devx_obj *
  92 mlx5_devx_cmd_flow_counter_alloc(void *ctx, uint32_t bulk_n_128)
  93 {
  94         struct mlx5_devx_obj *dcs = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*dcs),
  95                                                 0, SOCKET_ID_ANY);
  96         uint32_t in[MLX5_ST_SZ_DW(alloc_flow_counter_in)]   = {0};
  97         uint32_t out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0};
  98
  99         if (!dcs) {
 100                 rte_errno = ENOMEM;
 101                 return NULL;
 102         }
 103         MLX5_SET(alloc_flow_counter_in, in, opcode,
 104                  MLX5_CMD_OP_ALLOC_FLOW_COUNTER);
 105         MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, bulk_n_128);
 106         dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
 107                                               sizeof(in), out, sizeof(out));
 108         if (!dcs->obj) {
 109                 DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
 110                 rte_errno = errno;
 111                 mlx5_free(dcs);
 112                 return NULL;
 113         }
 114         dcs->id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id);
 115         return dcs;
 116 }
 117
 118 /**
 119  * Query flow counters values.
 120  *
 121  * @param[in] dcs
 122  *   devx object that was obtained from mlx5_devx_cmd_fc_alloc.
 123  * @param[in] clear
 124  *   Whether hardware should clear the counters after the query or not.
 125  * @param[in] n_counters
 126  *   0 in case of 1 counter to read, otherwise the counter number to read.
 127  *  @param pkts
 128  *   The number of packets that matched the flow.
 129  *  @param bytes
 130  *    The number of bytes that matched the flow.
 131  *  @param mkey
 132  *   The mkey key for batch query.
 133  *  @param addr
 134  *    The address in the mkey range for batch query.
 135  *  @param cmd_comp
 136  *   The completion object for asynchronous batch query.
 137  *  @param async_id
 138  *    The ID to be returned in the asynchronous batch query response.
 139  *
 140  * @return
 141  *   0 on success, a negative value otherwise.
 142  */
 143 int
 144 mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
 145                                  int clear, uint32_t n_counters,
 146                                  uint64_t *pkts, uint64_t *bytes,
 147                                  uint32_t mkey, void *addr,
 148                                  void *cmd_comp,
 149                                  uint64_t async_id)
 150 {
 151         int out_len = MLX5_ST_SZ_BYTES(query_flow_counter_out) +
 152                         MLX5_ST_SZ_BYTES(traffic_counter);
 153         uint32_t out[out_len];
 154         uint32_t in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
 155         void *stats;
 156         int rc;
 157
 158         MLX5_SET(query_flow_counter_in, in, opcode,
 159                  MLX5_CMD_OP_QUERY_FLOW_COUNTER);
 160         MLX5_SET(query_flow_counter_in, in, op_mod, 0);
 161         MLX5_SET(query_flow_counter_in, in, flow_counter_id, dcs->id);
 162         MLX5_SET(query_flow_counter_in, in, clear, !!clear);
 163
 164         if (n_counters) {
 165                 MLX5_SET(query_flow_counter_in, in, num_of_counters,
 166                          n_counters);
 167                 MLX5_SET(query_flow_counter_in, in, dump_to_memory, 1);
 168                 MLX5_SET(query_flow_counter_in, in, mkey, mkey);
 169                 MLX5_SET64(query_flow_counter_in, in, address,
 170                            (uint64_t)(uintptr_t)addr);
 171         }
 172         if (!cmd_comp)
 173                 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out,
 174                                                out_len);
 175         else
 176                 rc = mlx5_glue->devx_obj_query_async(dcs->obj, in, sizeof(in),
 177                                                      out_len, async_id,
 178                                                      cmd_comp);
 179         if (rc) {
 180                 DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc);
 181                 rte_errno = rc;
 182                 return -rc;
 183         }
 184         if (!n_counters) {
 185                 stats = MLX5_ADDR_OF(query_flow_counter_out,
 186                                      out, flow_statistics);
 187                 *pkts = MLX5_GET64(traffic_counter, stats, packets);
 188                 *bytes = MLX5_GET64(traffic_counter, stats, octets);
 189         }
 190         return 0;
 191 }
 192
 193 /**
 194  * Create a new mkey.
 195  *
 196  * @param[in] ctx
 197  *   Context returned from mlx5 open_device() glue function.
 198  * @param[in] attr
 199  *   Attributes of the requested mkey.
 200  *
 201  * @return
 202  *   Pointer to Devx mkey on success, a negative value otherwise and rte_errno
 203  *   is set.
 204  */
 205 struct mlx5_devx_obj *
 206 mlx5_devx_cmd_mkey_create(void *ctx,
 207                           struct mlx5_devx_mkey_attr *attr)
 208 {
 209         struct mlx5_klm *klm_array = attr->klm_array;
 210         int klm_num = attr->klm_num;
 211         int in_size_dw = MLX5_ST_SZ_DW(create_mkey_in) +
 212                      (klm_num ? RTE_ALIGN(klm_num, 4) : 0) * MLX5_ST_SZ_DW(klm);
 213         uint32_t in[in_size_dw];
 214         uint32_t out[MLX5_ST_SZ_DW(create_mkey_out)] = {0};
 215         void *mkc;
 216         struct mlx5_devx_obj *mkey = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*mkey),
 217                                                  0, SOCKET_ID_ANY);
 218         size_t pgsize;
 219         uint32_t translation_size;
 220
 221         if (!mkey) {
 222                 rte_errno = ENOMEM;
 223                 return NULL;
 224         }
 225         memset(in, 0, in_size_dw * 4);
 226         pgsize = rte_mem_page_size();
 227         if (pgsize == (size_t)-1) {
 228                 mlx5_free(mkey);
 229                 DRV_LOG(ERR, "Failed to get page size");
 230                 rte_errno = ENOMEM;
 231                 return NULL;
 232         }
 233         MLX5_SET(create_mkey_in, in, opcode, MLX5_CMD_OP_CREATE_MKEY);
 234         mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
 235         if (klm_num > 0) {
 236                 int i;
 237                 uint8_t *klm = (uint8_t *)MLX5_ADDR_OF(create_mkey_in, in,
 238                                                        klm_pas_mtt);
 239                 translation_size = RTE_ALIGN(klm_num, 4);
 240                 for (i = 0; i < klm_num; i++) {
 241                         MLX5_SET(klm, klm, byte_count, klm_array[i].byte_count);
 242                         MLX5_SET(klm, klm, mkey, klm_array[i].mkey);
 243                         MLX5_SET64(klm, klm, address, klm_array[i].address);
 244                         klm += MLX5_ST_SZ_BYTES(klm);
 245                 }
 246                 for (; i < (int)translation_size; i++) {
 247                         MLX5_SET(klm, klm, mkey, 0x0);
 248                         MLX5_SET64(klm, klm, address, 0x0);
 249                         klm += MLX5_ST_SZ_BYTES(klm);
 250                 }
 251                 MLX5_SET(mkc, mkc, access_mode_1_0, attr->log_entity_size ?
 252                          MLX5_MKC_ACCESS_MODE_KLM_FBS :
 253                          MLX5_MKC_ACCESS_MODE_KLM);
 254                 MLX5_SET(mkc, mkc, log_page_size, attr->log_entity_size);
 255         } else {
 256                 translation_size = (RTE_ALIGN(attr->size, pgsize) * 8) / 16;
 257                 MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
 258                 MLX5_SET(mkc, mkc, log_page_size, rte_log2_u32(pgsize));
 259         }
 260         MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
 261                  translation_size);
 262         MLX5_SET(create_mkey_in, in, mkey_umem_id, attr->umem_id);
 263         MLX5_SET(create_mkey_in, in, pg_access, attr->pg_access);
 264         MLX5_SET(mkc, mkc, lw, 0x1);
 265         MLX5_SET(mkc, mkc, lr, 0x1);
 266         MLX5_SET(mkc, mkc, qpn, 0xffffff);
 267         MLX5_SET(mkc, mkc, pd, attr->pd);
 268         MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
 269         MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
 270         MLX5_SET(mkc, mkc, relaxed_ordering_write,
 271                 attr->relaxed_ordering_write);
 272         MLX5_SET(mkc, mkc, relaxed_ordering_read,
 273                 attr->relaxed_ordering_read);
 274         MLX5_SET64(mkc, mkc, start_addr, attr->addr);
 275         MLX5_SET64(mkc, mkc, len, attr->size);
 276         mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out,
 277                                                sizeof(out));
 278         if (!mkey->obj) {
 279                 DRV_LOG(ERR, "Can't create %sdirect mkey - error %d\n",
 280                         klm_num ? "an in" : "a ", errno);
 281                 rte_errno = errno;
 282                 mlx5_free(mkey);
 283                 return NULL;
 284         }
 285         mkey->id = MLX5_GET(create_mkey_out, out, mkey_index);
 286         mkey->id = (mkey->id << 8) | (attr->umem_id & 0xFF);
 287         return mkey;
 288 }
 289
 290 /**
 291  * Get status of devx command response.
 292  * Mainly used for asynchronous commands.
 293  *
 294  * @param[in] out
 295  *   The out response buffer.
 296  *
 297  * @return
 298  *   0 on success, non-zero value otherwise.
 299  */
 300 int
 301 mlx5_devx_get_out_command_status(void *out)
 302 {
 303         int status;
 304
 305         if (!out)
 306                 return -EINVAL;
 307         status = MLX5_GET(query_flow_counter_out, out, status);
 308         if (status) {
 309                 int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome);
 310
 311                 DRV_LOG(ERR, "Bad devX status %x, syndrome = %x", status,
 312                         syndrome);
 313         }
 314         return status;
 315 }
 316
 317 /**
 318  * Destroy any object allocated by a Devx API.
 319  *
 320  * @param[in] obj
 321  *   Pointer to a general object.
 322  *
 323  * @return
 324  *   0 on success, a negative value otherwise.
 325  */
 326 int
 327 mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj)
 328 {
 329         int ret;
 330
 331         if (!obj)
 332                 return 0;
 333         ret =  mlx5_glue->devx_obj_destroy(obj->obj);
 334         mlx5_free(obj);
 335         return ret;
 336 }
 337
 338 /**
 339  * Query NIC vport context.
 340  * Fills minimal inline attribute.
 341  *
 342  * @param[in] ctx
 343  *   ibv contexts returned from mlx5dv_open_device.
 344  * @param[in] vport
 345  *   vport index
 346  * @param[out] attr
 347  *   Attributes device values.
 348  *
 349  * @return
 350  *   0 on success, a negative value otherwise.
 351  */
 352 static int
 353 mlx5_devx_cmd_query_nic_vport_context(void *ctx,
 354                                       unsigned int vport,
 355                                       struct mlx5_hca_attr *attr)
 356 {
 357         uint32_t in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
 358         uint32_t out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0};
 359         void *vctx;
 360         int status, syndrome, rc;
 361
 362         /* Query NIC vport context to determine inline mode. */
 363         MLX5_SET(query_nic_vport_context_in, in, opcode,
 364                  MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
 365         MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
 366         if (vport)
 367                 MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
 368         rc = mlx5_glue->devx_general_cmd(ctx,
 369                                          in, sizeof(in),
 370                                          out, sizeof(out));
 371         if (rc)
 372                 goto error;
 373         status = MLX5_GET(query_nic_vport_context_out, out, status);
 374         syndrome = MLX5_GET(query_nic_vport_context_out, out, syndrome);
 375         if (status) {
 376                 DRV_LOG(DEBUG, "Failed to query NIC vport context, "
 377                         "status %x, syndrome = %x",
 378                         status, syndrome);
 379                 return -1;
 380         }
 381         vctx = MLX5_ADDR_OF(query_nic_vport_context_out, out,
 382                             nic_vport_context);
 383         attr->vport_inline_mode = MLX5_GET(nic_vport_context, vctx,
 384                                            min_wqe_inline_mode);
 385         return 0;
 386 error:
 387         rc = (rc > 0) ? -rc : rc;
 388         return rc;
 389 }
 390
 391 /**
 392  * Query NIC vDPA attributes.
 393  *
 394  * @param[in] ctx
 395  *   Context returned from mlx5 open_device() glue function.
 396  * @param[out] vdpa_attr
 397  *   vDPA Attributes structure to fill.
 398  */
 399 static void
 400 mlx5_devx_cmd_query_hca_vdpa_attr(void *ctx,
 401                                   struct mlx5_hca_vdpa_attr *vdpa_attr)
 402 {
 403         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 404         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 405         void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 406         int status, syndrome, rc;
 407
 408         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 409         MLX5_SET(query_hca_cap_in, in, op_mod,
 410                  MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION |
 411                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 412         rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
 413         status = MLX5_GET(query_hca_cap_out, out, status);
 414         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 415         if (rc || status) {
 416                 RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities,"
 417                         " status %x, syndrome = %x", status, syndrome);
 418                 vdpa_attr->valid = 0;
 419         } else {
 420                 vdpa_attr->valid = 1;
 421                 vdpa_attr->desc_tunnel_offload_type =
 422                         MLX5_GET(virtio_emulation_cap, hcattr,
 423                                  desc_tunnel_offload_type);
 424                 vdpa_attr->eth_frame_offload_type =
 425                         MLX5_GET(virtio_emulation_cap, hcattr,
 426                                  eth_frame_offload_type);
 427                 vdpa_attr->virtio_version_1_0 =
 428                         MLX5_GET(virtio_emulation_cap, hcattr,
 429                                  virtio_version_1_0);
 430                 vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr,
 431                                                tso_ipv4);
 432                 vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr,
 433                                                tso_ipv6);
 434                 vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 435                                               tx_csum);
 436                 vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
 437                                               rx_csum);
 438                 vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr,
 439                                                  event_mode);
 440                 vdpa_attr->virtio_queue_type =
 441                         MLX5_GET(virtio_emulation_cap, hcattr,
 442                                  virtio_queue_type);
 443                 vdpa_attr->log_doorbell_stride =
 444                         MLX5_GET(virtio_emulation_cap, hcattr,
 445                                  log_doorbell_stride);
 446                 vdpa_attr->log_doorbell_bar_size =
 447                         MLX5_GET(virtio_emulation_cap, hcattr,
 448                                  log_doorbell_bar_size);
 449                 vdpa_attr->doorbell_bar_offset =
 450                         MLX5_GET64(virtio_emulation_cap, hcattr,
 451                                    doorbell_bar_offset);
 452                 vdpa_attr->max_num_virtio_queues =
 453                         MLX5_GET(virtio_emulation_cap, hcattr,
 454                                  max_num_virtio_queues);
 455                 vdpa_attr->umems[0].a = MLX5_GET(virtio_emulation_cap, hcattr,
 456                                                  umem_1_buffer_param_a);
 457                 vdpa_attr->umems[0].b = MLX5_GET(virtio_emulation_cap, hcattr,
 458                                                  umem_1_buffer_param_b);
 459                 vdpa_attr->umems[1].a = MLX5_GET(virtio_emulation_cap, hcattr,
 460                                                  umem_2_buffer_param_a);
 461                 vdpa_attr->umems[1].b = MLX5_GET(virtio_emulation_cap, hcattr,
 462                                                  umem_2_buffer_param_b);
 463                 vdpa_attr->umems[2].a = MLX5_GET(virtio_emulation_cap, hcattr,
 464                                                  umem_3_buffer_param_a);
 465                 vdpa_attr->umems[2].b = MLX5_GET(virtio_emulation_cap, hcattr,
 466                                                  umem_3_buffer_param_b);
 467         }
 468 }
 469
 470 int
 471 mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
 472                                   uint32_t ids[], uint32_t num)
 473 {
 474         uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
 475         uint32_t out[MLX5_ST_SZ_DW(create_flex_parser_out)] = {0};
 476         void *hdr = MLX5_ADDR_OF(create_flex_parser_out, in, hdr);
 477         void *flex = MLX5_ADDR_OF(create_flex_parser_out, out, flex);
 478         void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table);
 479         int ret;
 480         uint32_t idx = 0;
 481         uint32_t i;
 482
 483         if (num > MLX5_GRAPH_NODE_SAMPLE_NUM) {
 484                 rte_errno = EINVAL;
 485                 DRV_LOG(ERR, "Too many sample IDs to be fetched.");
 486                 return -rte_errno;
 487         }
 488         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
 489                  MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
 490         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
 491                  MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH);
 492         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, flex_obj->id);
 493         ret = mlx5_glue->devx_obj_query(flex_obj->obj, in, sizeof(in),
 494                                         out, sizeof(out));
 495         if (ret) {
 496                 rte_errno = ret;
 497                 DRV_LOG(ERR, "Failed to query sample IDs with object %p.",
 498                         (void *)flex_obj);
 499                 return -rte_errno;
 500         }
 501         for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) {
 502                 void *s_off = (void *)((char *)sample + i *
 503                               MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample));
 504                 uint32_t en;
 505
 506                 en = MLX5_GET(parse_graph_flow_match_sample, s_off,
 507                               flow_match_sample_en);
 508                 if (!en)
 509                         continue;
 510                 ids[idx++] = MLX5_GET(parse_graph_flow_match_sample, s_off,
 511                                   flow_match_sample_field_id);
 512         }
 513         if (num != idx) {
 514                 rte_errno = EINVAL;
 515                 DRV_LOG(ERR, "Number of sample IDs are not as expected.");
 516                 return -rte_errno;
 517         }
 518         return ret;
 519 }
 520
 521
 522 struct mlx5_devx_obj *
 523 mlx5_devx_cmd_create_flex_parser(void *ctx,
 524                               struct mlx5_devx_graph_node_attr *data)
 525 {
 526         uint32_t in[MLX5_ST_SZ_DW(create_flex_parser_in)] = {0};
 527         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
 528         void *hdr = MLX5_ADDR_OF(create_flex_parser_in, in, hdr);
 529         void *flex = MLX5_ADDR_OF(create_flex_parser_in, in, flex);
 530         void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table);
 531         void *in_arc = MLX5_ADDR_OF(parse_graph_flex, flex, input_arc);
 532         void *out_arc = MLX5_ADDR_OF(parse_graph_flex, flex, output_arc);
 533         struct mlx5_devx_obj *parse_flex_obj = NULL;
 534         uint32_t i;
 535
 536         parse_flex_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*parse_flex_obj), 0,
 537                                      SOCKET_ID_ANY);
 538         if (!parse_flex_obj) {
 539                 DRV_LOG(ERR, "Failed to allocate flex parser data");
 540                 rte_errno = ENOMEM;
 541                 mlx5_free(in);
 542                 return NULL;
 543         }
 544         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
 545                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
 546         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
 547                  MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH);
 548         MLX5_SET(parse_graph_flex, flex, header_length_mode,
 549                  data->header_length_mode);
 550         MLX5_SET(parse_graph_flex, flex, header_length_base_value,
 551                  data->header_length_base_value);
 552         MLX5_SET(parse_graph_flex, flex, header_length_field_offset,
 553                  data->header_length_field_offset);
 554         MLX5_SET(parse_graph_flex, flex, header_length_field_shift,
 555                  data->header_length_field_shift);
 556         MLX5_SET(parse_graph_flex, flex, header_length_field_mask,
 557                  data->header_length_field_mask);
 558         for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) {
 559                 struct mlx5_devx_match_sample_attr *s = &data->sample[i];
 560                 void *s_off = (void *)((char *)sample + i *
 561                               MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample));
 562
 563                 if (!s->flow_match_sample_en)
 564                         continue;
 565                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 566                          flow_match_sample_en, !!s->flow_match_sample_en);
 567                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 568                          flow_match_sample_field_offset,
 569                          s->flow_match_sample_field_offset);
 570                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 571                          flow_match_sample_offset_mode,
 572                          s->flow_match_sample_offset_mode);
 573                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 574                          flow_match_sample_field_offset_mask,
 575                          s->flow_match_sample_field_offset_mask);
 576                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 577                          flow_match_sample_field_offset_shift,
 578                          s->flow_match_sample_field_offset_shift);
 579                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 580                          flow_match_sample_field_base_offset,
 581                          s->flow_match_sample_field_base_offset);
 582                 MLX5_SET(parse_graph_flow_match_sample, s_off,
 583                          flow_match_sample_tunnel_mode,
 584                          s->flow_match_sample_tunnel_mode);
 585         }
 586         for (i = 0; i < MLX5_GRAPH_NODE_ARC_NUM; i++) {
 587                 struct mlx5_devx_graph_arc_attr *ia = &data->in[i];
 588                 struct mlx5_devx_graph_arc_attr *oa = &data->out[i];
 589                 void *in_off = (void *)((char *)in_arc + i *
 590                               MLX5_ST_SZ_BYTES(parse_graph_arc));
 591                 void *out_off = (void *)((char *)out_arc + i *
 592                               MLX5_ST_SZ_BYTES(parse_graph_arc));
 593
 594                 if (ia->arc_parse_graph_node != 0) {
 595                         MLX5_SET(parse_graph_arc, in_off,
 596                                  compare_condition_value,
 597                                  ia->compare_condition_value);
 598                         MLX5_SET(parse_graph_arc, in_off, start_inner_tunnel,
 599                                  ia->start_inner_tunnel);
 600                         MLX5_SET(parse_graph_arc, in_off, arc_parse_graph_node,
 601                                  ia->arc_parse_graph_node);
 602                         MLX5_SET(parse_graph_arc, in_off,
 603                                  parse_graph_node_handle,
 604                                  ia->parse_graph_node_handle);
 605                 }
 606                 if (oa->arc_parse_graph_node != 0) {
 607                         MLX5_SET(parse_graph_arc, out_off,
 608                                  compare_condition_value,
 609                                  oa->compare_condition_value);
 610                         MLX5_SET(parse_graph_arc, out_off, start_inner_tunnel,
 611                                  oa->start_inner_tunnel);
 612                         MLX5_SET(parse_graph_arc, out_off, arc_parse_graph_node,
 613                                  oa->arc_parse_graph_node);
 614                         MLX5_SET(parse_graph_arc, out_off,
 615                                  parse_graph_node_handle,
 616                                  oa->parse_graph_node_handle);
 617                 }
 618         }
 619         parse_flex_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 620                                                          out, sizeof(out));
 621         if (!parse_flex_obj->obj) {
 622                 rte_errno = errno;
 623                 DRV_LOG(ERR, "Failed to create FLEX PARSE GRAPH object "
 624                         "by using DevX.");
 625                 mlx5_free(parse_flex_obj);
 626                 return NULL;
 627         }
 628         parse_flex_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
 629         return parse_flex_obj;
 630 }
 631
 632 /**
 633  * Query HCA attributes.
 634  * Using those attributes we can check on run time if the device
 635  * is having the required capabilities.
 636  *
 637  * @param[in] ctx
 638  *   Context returned from mlx5 open_device() glue function.
 639  * @param[out] attr
 640  *   Attributes device values.
 641  *
 642  * @return
 643  *   0 on success, a negative value otherwise.
 644  */
 645 int
 646 mlx5_devx_cmd_query_hca_attr(void *ctx,
 647                              struct mlx5_hca_attr *attr)
 648 {
 649         uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
 650         uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
 651         void *hcattr;
 652         int status, syndrome, rc, i;
 653
 654         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 655         MLX5_SET(query_hca_cap_in, in, op_mod,
 656                  MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
 657                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 658
 659         rc = mlx5_glue->devx_general_cmd(ctx,
 660                                          in, sizeof(in), out, sizeof(out));
 661         if (rc)
 662                 goto error;
 663         status = MLX5_GET(query_hca_cap_out, out, status);
 664         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 665         if (status) {
 666                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 667                         "status %x, syndrome = %x",
 668                         status, syndrome);
 669                 return -1;
 670         }
 671         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 672         attr->flow_counter_bulk_alloc_bitmap =
 673                         MLX5_GET(cmd_hca_cap, hcattr, flow_counter_bulk_alloc);
 674         attr->flow_counters_dump = MLX5_GET(cmd_hca_cap, hcattr,
 675                                             flow_counters_dump);
 676         attr->log_max_rqt_size = MLX5_GET(cmd_hca_cap, hcattr,
 677                                           log_max_rqt_size);
 678         attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager);
 679         attr->hairpin = MLX5_GET(cmd_hca_cap, hcattr, hairpin);
 680         attr->log_max_hairpin_queues = MLX5_GET(cmd_hca_cap, hcattr,
 681                                                 log_max_hairpin_queues);
 682         attr->log_max_hairpin_wq_data_sz = MLX5_GET(cmd_hca_cap, hcattr,
 683                                                     log_max_hairpin_wq_data_sz);
 684         attr->log_max_hairpin_num_packets = MLX5_GET
 685                 (cmd_hca_cap, hcattr, log_min_hairpin_wq_data_sz);
 686         attr->vhca_id = MLX5_GET(cmd_hca_cap, hcattr, vhca_id);
 687         attr->relaxed_ordering_write = MLX5_GET(cmd_hca_cap, hcattr,
 688                         relaxed_ordering_write);
 689         attr->relaxed_ordering_read = MLX5_GET(cmd_hca_cap, hcattr,
 690                         relaxed_ordering_read);
 691         attr->access_register_user = MLX5_GET(cmd_hca_cap, hcattr,
 692                         access_register_user);
 693         attr->eth_net_offloads = MLX5_GET(cmd_hca_cap, hcattr,
 694                                           eth_net_offloads);
 695         attr->eth_virt = MLX5_GET(cmd_hca_cap, hcattr, eth_virt);
 696         attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr,
 697                                                flex_parser_protocols);
 698         attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos);
 699         attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 700                                          general_obj_types) &
 701                               MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q);
 702         attr->vdpa.queue_counters_valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 703                                                         general_obj_types) &
 704                                   MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_Q_COUNTERS);
 705         attr->parse_graph_flex_node = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 706                                          general_obj_types) &
 707                               MLX5_GENERAL_OBJ_TYPES_CAP_PARSE_GRAPH_FLEX_NODE);
 708         attr->wqe_index_ignore = MLX5_GET(cmd_hca_cap, hcattr,
 709                                           wqe_index_ignore_cap);
 710         attr->cross_channel = MLX5_GET(cmd_hca_cap, hcattr, cd);
 711         attr->non_wire_sq = MLX5_GET(cmd_hca_cap, hcattr, non_wire_sq);
 712         attr->log_max_static_sq_wq = MLX5_GET(cmd_hca_cap, hcattr,
 713                                               log_max_static_sq_wq);
 714         attr->num_lag_ports = MLX5_GET(cmd_hca_cap, hcattr, num_lag_ports);
 715         attr->dev_freq_khz = MLX5_GET(cmd_hca_cap, hcattr,
 716                                       device_frequency_khz);
 717         attr->scatter_fcs_w_decap_disable =
 718                 MLX5_GET(cmd_hca_cap, hcattr, scatter_fcs_w_decap_disable);
 719         attr->regex = MLX5_GET(cmd_hca_cap, hcattr, regexp);
 720         attr->regexp_num_of_engines = MLX5_GET(cmd_hca_cap, hcattr,
 721                                                regexp_num_of_engines);
 722         attr->flow_hit_aso = !!(MLX5_GET64(cmd_hca_cap, hcattr,
 723                                            general_obj_types) &
 724                                 MLX5_GENERAL_OBJ_TYPES_CAP_FLOW_HIT_ASO);
 725         if (attr->qos.sup) {
 726                 MLX5_SET(query_hca_cap_in, in, op_mod,
 727                          MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
 728                          MLX5_HCA_CAP_OPMOD_GET_CUR);
 729                 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in),
 730                                                  out, sizeof(out));
 731                 if (rc)
 732                         goto error;
 733                 if (status) {
 734                         DRV_LOG(DEBUG, "Failed to query devx QOS capabilities,"
 735                                 " status %x, syndrome = %x",
 736                                 status, syndrome);
 737                         return -1;
 738                 }
 739                 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 740                 attr->qos.srtcm_sup =
 741                                 MLX5_GET(qos_cap, hcattr, flow_meter_srtcm);
 742                 attr->qos.log_max_flow_meter =
 743                                 MLX5_GET(qos_cap, hcattr, log_max_flow_meter);
 744                 attr->qos.flow_meter_reg_c_ids =
 745                                 MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
 746                 attr->qos.flow_meter_reg_share =
 747                                 MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
 748                 attr->qos.packet_pacing =
 749                                 MLX5_GET(qos_cap, hcattr, packet_pacing);
 750                 attr->qos.wqe_rate_pp =
 751                                 MLX5_GET(qos_cap, hcattr, wqe_rate_pp);
 752         }
 753         if (attr->vdpa.valid)
 754                 mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
 755         if (!attr->eth_net_offloads)
 756                 return 0;
 757
 758         /* Query Flow Sampler Capability From FLow Table Properties Layout. */
 759         memset(in, 0, sizeof(in));
 760         memset(out, 0, sizeof(out));
 761         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 762         MLX5_SET(query_hca_cap_in, in, op_mod,
 763                  MLX5_GET_HCA_CAP_OP_MOD_NIC_FLOW_TABLE |
 764                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 765
 766         rc = mlx5_glue->devx_general_cmd(ctx,
 767                                          in, sizeof(in),
 768                                          out, sizeof(out));
 769         if (rc)
 770                 goto error;
 771         status = MLX5_GET(query_hca_cap_out, out, status);
 772         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 773         if (status) {
 774                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 775                         "status %x, syndrome = %x",
 776                         status, syndrome);
 777                 attr->log_max_ft_sampler_num = 0;
 778                 return -1;
 779         }
 780         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 781         attr->log_max_ft_sampler_num =
 782                         MLX5_GET(flow_table_nic_cap,
 783                         hcattr, flow_table_properties.log_max_ft_sampler_num);
 784
 785         /* Query HCA offloads for Ethernet protocol. */
 786         memset(in, 0, sizeof(in));
 787         memset(out, 0, sizeof(out));
 788         MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
 789         MLX5_SET(query_hca_cap_in, in, op_mod,
 790                  MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS |
 791                  MLX5_HCA_CAP_OPMOD_GET_CUR);
 792
 793         rc = mlx5_glue->devx_general_cmd(ctx,
 794                                          in, sizeof(in),
 795                                          out, sizeof(out));
 796         if (rc) {
 797                 attr->eth_net_offloads = 0;
 798                 goto error;
 799         }
 800         status = MLX5_GET(query_hca_cap_out, out, status);
 801         syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
 802         if (status) {
 803                 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
 804                         "status %x, syndrome = %x",
 805                         status, syndrome);
 806                 attr->eth_net_offloads = 0;
 807                 return -1;
 808         }
 809         hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
 810         attr->wqe_vlan_insert = MLX5_GET(per_protocol_networking_offload_caps,
 811                                          hcattr, wqe_vlan_insert);
 812         attr->lro_cap = MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 813                                  lro_cap);
 814         attr->tunnel_lro_gre = MLX5_GET(per_protocol_networking_offload_caps,
 815                                         hcattr, tunnel_lro_gre);
 816         attr->tunnel_lro_vxlan = MLX5_GET(per_protocol_networking_offload_caps,
 817                                           hcattr, tunnel_lro_vxlan);
 818         attr->lro_max_msg_sz_mode = MLX5_GET
 819                                         (per_protocol_networking_offload_caps,
 820                                          hcattr, lro_max_msg_sz_mode);
 821         for (i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
 822                 attr->lro_timer_supported_periods[i] =
 823                         MLX5_GET(per_protocol_networking_offload_caps, hcattr,
 824                                  lro_timer_supported_periods[i]);
 825         }
 826         attr->lro_min_mss_size = MLX5_GET(per_protocol_networking_offload_caps,
 827                                           hcattr, lro_min_mss_size);
 828         attr->tunnel_stateless_geneve_rx =
 829                             MLX5_GET(per_protocol_networking_offload_caps,
 830                                      hcattr, tunnel_stateless_geneve_rx);
 831         attr->geneve_max_opt_len =
 832                     MLX5_GET(per_protocol_networking_offload_caps,
 833                              hcattr, max_geneve_opt_len);
 834         attr->wqe_inline_mode = MLX5_GET(per_protocol_networking_offload_caps,
 835                                          hcattr, wqe_inline_mode);
 836         attr->tunnel_stateless_gtp = MLX5_GET
 837                                         (per_protocol_networking_offload_caps,
 838                                          hcattr, tunnel_stateless_gtp);
 839         if (attr->wqe_inline_mode != MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
 840                 return 0;
 841         if (attr->eth_virt) {
 842                 rc = mlx5_devx_cmd_query_nic_vport_context(ctx, 0, attr);
 843                 if (rc) {
 844                         attr->eth_virt = 0;
 845                         goto error;
 846                 }
 847         }
 848         return 0;
 849 error:
 850         rc = (rc > 0) ? -rc : rc;
 851         return rc;
 852 }
 853
 854 /**
 855  * Query TIS transport domain from QP verbs object using DevX API.
 856  *
 857  * @param[in] qp
 858  *   Pointer to verbs QP returned by ibv_create_qp .
 859  * @param[in] tis_num
 860  *   TIS number of TIS to query.
 861  * @param[out] tis_td
 862  *   Pointer to TIS transport domain variable, to be set by the routine.
 863  *
 864  * @return
 865  *   0 on success, a negative value otherwise.
 866  */
 867 int
 868 mlx5_devx_cmd_qp_query_tis_td(void *qp, uint32_t tis_num,
 869                               uint32_t *tis_td)
 870 {
 871 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 872         uint32_t in[MLX5_ST_SZ_DW(query_tis_in)] = {0};
 873         uint32_t out[MLX5_ST_SZ_DW(query_tis_out)] = {0};
 874         int rc;
 875         void *tis_ctx;
 876
 877         MLX5_SET(query_tis_in, in, opcode, MLX5_CMD_OP_QUERY_TIS);
 878         MLX5_SET(query_tis_in, in, tisn, tis_num);
 879         rc = mlx5_glue->devx_qp_query(qp, in, sizeof(in), out, sizeof(out));
 880         if (rc) {
 881                 DRV_LOG(ERR, "Failed to query QP using DevX");
 882                 return -rc;
 883         };
 884         tis_ctx = MLX5_ADDR_OF(query_tis_out, out, tis_context);
 885         *tis_td = MLX5_GET(tisc, tis_ctx, transport_domain);
 886         return 0;
 887 #else
 888         (void)qp;
 889         (void)tis_num;
 890         (void)tis_td;
 891         return -ENOTSUP;
 892 #endif
 893 }
 894
 895 /**
 896  * Fill WQ data for DevX API command.
 897  * Utility function for use when creating DevX objects containing a WQ.
 898  *
 899  * @param[in] wq_ctx
 900  *   Pointer to WQ context to fill with data.
 901  * @param [in] wq_attr
 902  *   Pointer to WQ attributes structure to fill in WQ context.
 903  */
 904 static void
 905 devx_cmd_fill_wq_data(void *wq_ctx, struct mlx5_devx_wq_attr *wq_attr)
 906 {
 907         MLX5_SET(wq, wq_ctx, wq_type, wq_attr->wq_type);
 908         MLX5_SET(wq, wq_ctx, wq_signature, wq_attr->wq_signature);
 909         MLX5_SET(wq, wq_ctx, end_padding_mode, wq_attr->end_padding_mode);
 910         MLX5_SET(wq, wq_ctx, cd_slave, wq_attr->cd_slave);
 911         MLX5_SET(wq, wq_ctx, hds_skip_first_sge, wq_attr->hds_skip_first_sge);
 912         MLX5_SET(wq, wq_ctx, log2_hds_buf_size, wq_attr->log2_hds_buf_size);
 913         MLX5_SET(wq, wq_ctx, page_offset, wq_attr->page_offset);
 914         MLX5_SET(wq, wq_ctx, lwm, wq_attr->lwm);
 915         MLX5_SET(wq, wq_ctx, pd, wq_attr->pd);
 916         MLX5_SET(wq, wq_ctx, uar_page, wq_attr->uar_page);
 917         MLX5_SET64(wq, wq_ctx, dbr_addr, wq_attr->dbr_addr);
 918         MLX5_SET(wq, wq_ctx, hw_counter, wq_attr->hw_counter);
 919         MLX5_SET(wq, wq_ctx, sw_counter, wq_attr->sw_counter);
 920         MLX5_SET(wq, wq_ctx, log_wq_stride, wq_attr->log_wq_stride);
 921         MLX5_SET(wq, wq_ctx, log_wq_pg_sz, wq_attr->log_wq_pg_sz);
 922         MLX5_SET(wq, wq_ctx, log_wq_sz, wq_attr->log_wq_sz);
 923         MLX5_SET(wq, wq_ctx, dbr_umem_valid, wq_attr->dbr_umem_valid);
 924         MLX5_SET(wq, wq_ctx, wq_umem_valid, wq_attr->wq_umem_valid);
 925         MLX5_SET(wq, wq_ctx, log_hairpin_num_packets,
 926                  wq_attr->log_hairpin_num_packets);
 927         MLX5_SET(wq, wq_ctx, log_hairpin_data_sz, wq_attr->log_hairpin_data_sz);
 928         MLX5_SET(wq, wq_ctx, single_wqe_log_num_of_strides,
 929                  wq_attr->single_wqe_log_num_of_strides);
 930         MLX5_SET(wq, wq_ctx, two_byte_shift_en, wq_attr->two_byte_shift_en);
 931         MLX5_SET(wq, wq_ctx, single_stride_log_num_of_bytes,
 932                  wq_attr->single_stride_log_num_of_bytes);
 933         MLX5_SET(wq, wq_ctx, dbr_umem_id, wq_attr->dbr_umem_id);
 934         MLX5_SET(wq, wq_ctx, wq_umem_id, wq_attr->wq_umem_id);
 935         MLX5_SET64(wq, wq_ctx, wq_umem_offset, wq_attr->wq_umem_offset);
 936 }
 937
 938 /**
 939  * Create RQ using DevX API.
 940  *
 941  * @param[in] ctx
 942  *   Context returned from mlx5 open_device() glue function.
 943  * @param [in] rq_attr
 944  *   Pointer to create RQ attributes structure.
 945  * @param [in] socket
 946  *   CPU socket ID for allocations.
 947  *
 948  * @return
 949  *   The DevX object created, NULL otherwise and rte_errno is set.
 950  */
 951 struct mlx5_devx_obj *
 952 mlx5_devx_cmd_create_rq(void *ctx,
 953                         struct mlx5_devx_create_rq_attr *rq_attr,
 954                         int socket)
 955 {
 956         uint32_t in[MLX5_ST_SZ_DW(create_rq_in)] = {0};
 957         uint32_t out[MLX5_ST_SZ_DW(create_rq_out)] = {0};
 958         void *rq_ctx, *wq_ctx;
 959         struct mlx5_devx_wq_attr *wq_attr;
 960         struct mlx5_devx_obj *rq = NULL;
 961
 962         rq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rq), 0, socket);
 963         if (!rq) {
 964                 DRV_LOG(ERR, "Failed to allocate RQ data");
 965                 rte_errno = ENOMEM;
 966                 return NULL;
 967         }
 968         MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ);
 969         rq_ctx = MLX5_ADDR_OF(create_rq_in, in, ctx);
 970         MLX5_SET(rqc, rq_ctx, rlky, rq_attr->rlky);
 971         MLX5_SET(rqc, rq_ctx, delay_drop_en, rq_attr->delay_drop_en);
 972         MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
 973         MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
 974         MLX5_SET(rqc, rq_ctx, mem_rq_type, rq_attr->mem_rq_type);
 975         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
 976         MLX5_SET(rqc, rq_ctx, flush_in_error_en, rq_attr->flush_in_error_en);
 977         MLX5_SET(rqc, rq_ctx, hairpin, rq_attr->hairpin);
 978         MLX5_SET(rqc, rq_ctx, user_index, rq_attr->user_index);
 979         MLX5_SET(rqc, rq_ctx, cqn, rq_attr->cqn);
 980         MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
 981         MLX5_SET(rqc, rq_ctx, rmpn, rq_attr->rmpn);
 982         wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
 983         wq_attr = &rq_attr->wq_attr;
 984         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
 985         rq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
 986                                                   out, sizeof(out));
 987         if (!rq->obj) {
 988                 DRV_LOG(ERR, "Failed to create RQ using DevX");
 989                 rte_errno = errno;
 990                 mlx5_free(rq);
 991                 return NULL;
 992         }
 993         rq->id = MLX5_GET(create_rq_out, out, rqn);
 994         return rq;
 995 }
 996
 997 /**
 998  * Modify RQ using DevX API.
 999  *
1000  * @param[in] rq
1001  *   Pointer to RQ object structure.
1002  * @param [in] rq_attr
1003  *   Pointer to modify RQ attributes structure.
1004  *
1005  * @return
1006  *   0 on success, a negative errno value otherwise and rte_errno is set.
1007  */
1008 int
1009 mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
1010                         struct mlx5_devx_modify_rq_attr *rq_attr)
1011 {
1012         uint32_t in[MLX5_ST_SZ_DW(modify_rq_in)] = {0};
1013         uint32_t out[MLX5_ST_SZ_DW(modify_rq_out)] = {0};
1014         void *rq_ctx, *wq_ctx;
1015         int ret;
1016
1017         MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ);
1018         MLX5_SET(modify_rq_in, in, rq_state, rq_attr->rq_state);
1019         MLX5_SET(modify_rq_in, in, rqn, rq->id);
1020         MLX5_SET64(modify_rq_in, in, modify_bitmask, rq_attr->modify_bitmask);
1021         rq_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
1022         MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
1023         if (rq_attr->modify_bitmask &
1024                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_SCATTER_FCS)
1025                 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
1026         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD)
1027                 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
1028         if (rq_attr->modify_bitmask &
1029                         MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID)
1030                 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
1031         MLX5_SET(rqc, rq_ctx, hairpin_peer_sq, rq_attr->hairpin_peer_sq);
1032         MLX5_SET(rqc, rq_ctx, hairpin_peer_vhca, rq_attr->hairpin_peer_vhca);
1033         if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_WQ_LWM) {
1034                 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
1035                 MLX5_SET(wq, wq_ctx, lwm, rq_attr->lwm);
1036         }
1037         ret = mlx5_glue->devx_obj_modify(rq->obj, in, sizeof(in),
1038                                          out, sizeof(out));
1039         if (ret) {
1040                 DRV_LOG(ERR, "Failed to modify RQ using DevX");
1041                 rte_errno = errno;
1042                 return -errno;
1043         }
1044         return ret;
1045 }
1046
1047 /**
1048  * Create TIR using DevX API.
1049  *
1050  * @param[in] ctx
1051  *  Context returned from mlx5 open_device() glue function.
1052  * @param [in] tir_attr
1053  *   Pointer to TIR attributes structure.
1054  *
1055  * @return
1056  *   The DevX object created, NULL otherwise and rte_errno is set.
1057  */
1058 struct mlx5_devx_obj *
1059 mlx5_devx_cmd_create_tir(void *ctx,
1060                          struct mlx5_devx_tir_attr *tir_attr)
1061 {
1062         uint32_t in[MLX5_ST_SZ_DW(create_tir_in)] = {0};
1063         uint32_t out[MLX5_ST_SZ_DW(create_tir_out)] = {0};
1064         void *tir_ctx, *outer, *inner, *rss_key;
1065         struct mlx5_devx_obj *tir = NULL;
1066
1067         tir = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tir), 0, SOCKET_ID_ANY);
1068         if (!tir) {
1069                 DRV_LOG(ERR, "Failed to allocate TIR data");
1070                 rte_errno = ENOMEM;
1071                 return NULL;
1072         }
1073         MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
1074         tir_ctx = MLX5_ADDR_OF(create_tir_in, in, ctx);
1075         MLX5_SET(tirc, tir_ctx, disp_type, tir_attr->disp_type);
1076         MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
1077                  tir_attr->lro_timeout_period_usecs);
1078         MLX5_SET(tirc, tir_ctx, lro_enable_mask, tir_attr->lro_enable_mask);
1079         MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, tir_attr->lro_max_msg_sz);
1080         MLX5_SET(tirc, tir_ctx, inline_rqn, tir_attr->inline_rqn);
1081         MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, tir_attr->rx_hash_symmetric);
1082         MLX5_SET(tirc, tir_ctx, tunneled_offload_en,
1083                  tir_attr->tunneled_offload_en);
1084         MLX5_SET(tirc, tir_ctx, indirect_table, tir_attr->indirect_table);
1085         MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
1086         MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
1087         MLX5_SET(tirc, tir_ctx, transport_domain, tir_attr->transport_domain);
1088         rss_key = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_toeplitz_key);
1089         memcpy(rss_key, tir_attr->rx_hash_toeplitz_key, MLX5_RSS_HASH_KEY_LEN);
1090         outer = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_outer);
1091         MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
1092                  tir_attr->rx_hash_field_selector_outer.l3_prot_type);
1093         MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
1094                  tir_attr->rx_hash_field_selector_outer.l4_prot_type);
1095         MLX5_SET(rx_hash_field_select, outer, selected_fields,
1096                  tir_attr->rx_hash_field_selector_outer.selected_fields);
1097         inner = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_inner);
1098         MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
1099                  tir_attr->rx_hash_field_selector_inner.l3_prot_type);
1100         MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
1101                  tir_attr->rx_hash_field_selector_inner.l4_prot_type);
1102         MLX5_SET(rx_hash_field_select, inner, selected_fields,
1103                  tir_attr->rx_hash_field_selector_inner.selected_fields);
1104         tir->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1105                                                    out, sizeof(out));
1106         if (!tir->obj) {
1107                 DRV_LOG(ERR, "Failed to create TIR using DevX");
1108                 rte_errno = errno;
1109                 mlx5_free(tir);
1110                 return NULL;
1111         }
1112         tir->id = MLX5_GET(create_tir_out, out, tirn);
1113         return tir;
1114 }
1115
1116 /**
1117  * Modify TIR using DevX API.
1118  *
1119  * @param[in] tir
1120  *   Pointer to TIR DevX object structure.
1121  * @param [in] modify_tir_attr
1122  *   Pointer to TIR modification attributes structure.
1123  *
1124  * @return
1125  *   0 on success, a negative errno value otherwise and rte_errno is set.
1126  */
1127 int
1128 mlx5_devx_cmd_modify_tir(struct mlx5_devx_obj *tir,
1129                          struct mlx5_devx_modify_tir_attr *modify_tir_attr)
1130 {
1131         struct mlx5_devx_tir_attr *tir_attr = &modify_tir_attr->tir;
1132         uint32_t in[MLX5_ST_SZ_DW(modify_tir_in)] = {0};
1133         uint32_t out[MLX5_ST_SZ_DW(modify_tir_out)] = {0};
1134         void *tir_ctx;
1135         int ret;
1136
1137         MLX5_SET(modify_tir_in, in, opcode, MLX5_CMD_OP_MODIFY_TIR);
1138         MLX5_SET(modify_tir_in, in, tirn, modify_tir_attr->tirn);
1139         MLX5_SET64(modify_tir_in, in, modify_bitmask,
1140                    modify_tir_attr->modify_bitmask);
1141         tir_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
1142         if (modify_tir_attr->modify_bitmask &
1143                         MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_LRO) {
1144                 MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
1145                          tir_attr->lro_timeout_period_usecs);
1146                 MLX5_SET(tirc, tir_ctx, lro_enable_mask,
1147                          tir_attr->lro_enable_mask);
1148                 MLX5_SET(tirc, tir_ctx, lro_max_msg_sz,
1149                          tir_attr->lro_max_msg_sz);
1150         }
1151         if (modify_tir_attr->modify_bitmask &
1152                         MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_INDIRECT_TABLE)
1153                 MLX5_SET(tirc, tir_ctx, indirect_table,
1154                          tir_attr->indirect_table);
1155         if (modify_tir_attr->modify_bitmask &
1156                         MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_HASH) {
1157                 int i;
1158                 void *outer, *inner;
1159
1160                 MLX5_SET(tirc, tir_ctx, rx_hash_symmetric,
1161                          tir_attr->rx_hash_symmetric);
1162                 MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
1163                 for (i = 0; i < 10; i++) {
1164                         MLX5_SET(tirc, tir_ctx, rx_hash_toeplitz_key[i],
1165                                  tir_attr->rx_hash_toeplitz_key[i]);
1166                 }
1167                 outer = MLX5_ADDR_OF(tirc, tir_ctx,
1168                                      rx_hash_field_selector_outer);
1169                 MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
1170                          tir_attr->rx_hash_field_selector_outer.l3_prot_type);
1171                 MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
1172                          tir_attr->rx_hash_field_selector_outer.l4_prot_type);
1173                 MLX5_SET
1174                 (rx_hash_field_select, outer, selected_fields,
1175                  tir_attr->rx_hash_field_selector_outer.selected_fields);
1176                 inner = MLX5_ADDR_OF(tirc, tir_ctx,
1177                                      rx_hash_field_selector_inner);
1178                 MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
1179                          tir_attr->rx_hash_field_selector_inner.l3_prot_type);
1180                 MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
1181                          tir_attr->rx_hash_field_selector_inner.l4_prot_type);
1182                 MLX5_SET
1183                 (rx_hash_field_select, inner, selected_fields,
1184                  tir_attr->rx_hash_field_selector_inner.selected_fields);
1185         }
1186         if (modify_tir_attr->modify_bitmask &
1187             MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_SELF_LB_EN) {
1188                 MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
1189         }
1190         ret = mlx5_glue->devx_obj_modify(tir->obj, in, sizeof(in),
1191                                          out, sizeof(out));
1192         if (ret) {
1193                 DRV_LOG(ERR, "Failed to modify TIR using DevX");
1194                 rte_errno = errno;
1195                 return -errno;
1196         }
1197         return ret;
1198 }
1199
1200 /**
1201  * Create RQT using DevX API.
1202  *
1203  * @param[in] ctx
1204  *   Context returned from mlx5 open_device() glue function.
1205  * @param [in] rqt_attr
1206  *   Pointer to RQT attributes structure.
1207  *
1208  * @return
1209  *   The DevX object created, NULL otherwise and rte_errno is set.
1210  */
1211 struct mlx5_devx_obj *
1212 mlx5_devx_cmd_create_rqt(void *ctx,
1213                          struct mlx5_devx_rqt_attr *rqt_attr)
1214 {
1215         uint32_t *in = NULL;
1216         uint32_t inlen = MLX5_ST_SZ_BYTES(create_rqt_in) +
1217                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
1218         uint32_t out[MLX5_ST_SZ_DW(create_rqt_out)] = {0};
1219         void *rqt_ctx;
1220         struct mlx5_devx_obj *rqt = NULL;
1221         int i;
1222
1223         in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY);
1224         if (!in) {
1225                 DRV_LOG(ERR, "Failed to allocate RQT IN data");
1226                 rte_errno = ENOMEM;
1227                 return NULL;
1228         }
1229         rqt = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rqt), 0, SOCKET_ID_ANY);
1230         if (!rqt) {
1231                 DRV_LOG(ERR, "Failed to allocate RQT data");
1232                 rte_errno = ENOMEM;
1233                 mlx5_free(in);
1234                 return NULL;
1235         }
1236         MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT);
1237         rqt_ctx = MLX5_ADDR_OF(create_rqt_in, in, rqt_context);
1238         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
1239         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
1240         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
1241         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
1242                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
1243         rqt->obj = mlx5_glue->devx_obj_create(ctx, in, inlen, out, sizeof(out));
1244         mlx5_free(in);
1245         if (!rqt->obj) {
1246                 DRV_LOG(ERR, "Failed to create RQT using DevX");
1247                 rte_errno = errno;
1248                 mlx5_free(rqt);
1249                 return NULL;
1250         }
1251         rqt->id = MLX5_GET(create_rqt_out, out, rqtn);
1252         return rqt;
1253 }
1254
1255 /**
1256  * Modify RQT using DevX API.
1257  *
1258  * @param[in] rqt
1259  *   Pointer to RQT DevX object structure.
1260  * @param [in] rqt_attr
1261  *   Pointer to RQT attributes structure.
1262  *
1263  * @return
1264  *   0 on success, a negative errno value otherwise and rte_errno is set.
1265  */
1266 int
1267 mlx5_devx_cmd_modify_rqt(struct mlx5_devx_obj *rqt,
1268                          struct mlx5_devx_rqt_attr *rqt_attr)
1269 {
1270         uint32_t inlen = MLX5_ST_SZ_BYTES(modify_rqt_in) +
1271                          rqt_attr->rqt_actual_size * sizeof(uint32_t);
1272         uint32_t out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0};
1273         uint32_t *in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY);
1274         void *rqt_ctx;
1275         int i;
1276         int ret;
1277
1278         if (!in) {
1279                 DRV_LOG(ERR, "Failed to allocate RQT modify IN data.");
1280                 rte_errno = ENOMEM;
1281                 return -ENOMEM;
1282         }
1283         MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT);
1284         MLX5_SET(modify_rqt_in, in, rqtn, rqt->id);
1285         MLX5_SET64(modify_rqt_in, in, modify_bitmask, 0x1);
1286         rqt_ctx = MLX5_ADDR_OF(modify_rqt_in, in, rqt_context);
1287         MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
1288         MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
1289         MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
1290         for (i = 0; i < rqt_attr->rqt_actual_size; i++)
1291                 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
1292         ret = mlx5_glue->devx_obj_modify(rqt->obj, in, inlen, out, sizeof(out));
1293         mlx5_free(in);
1294         if (ret) {
1295                 DRV_LOG(ERR, "Failed to modify RQT using DevX.");
1296                 rte_errno = errno;
1297                 return -rte_errno;
1298         }
1299         return ret;
1300 }
1301
1302 /**
1303  * Create SQ using DevX API.
1304  *
1305  * @param[in] ctx
1306  *   Context returned from mlx5 open_device() glue function.
1307  * @param [in] sq_attr
1308  *   Pointer to SQ attributes structure.
1309  * @param [in] socket
1310  *   CPU socket ID for allocations.
1311  *
1312  * @return
1313  *   The DevX object created, NULL otherwise and rte_errno is set.
1314  **/
1315 struct mlx5_devx_obj *
1316 mlx5_devx_cmd_create_sq(void *ctx,
1317                         struct mlx5_devx_create_sq_attr *sq_attr)
1318 {
1319         uint32_t in[MLX5_ST_SZ_DW(create_sq_in)] = {0};
1320         uint32_t out[MLX5_ST_SZ_DW(create_sq_out)] = {0};
1321         void *sq_ctx;
1322         void *wq_ctx;
1323         struct mlx5_devx_wq_attr *wq_attr;
1324         struct mlx5_devx_obj *sq = NULL;
1325
1326         sq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sq), 0, SOCKET_ID_ANY);
1327         if (!sq) {
1328                 DRV_LOG(ERR, "Failed to allocate SQ data");
1329                 rte_errno = ENOMEM;
1330                 return NULL;
1331         }
1332         MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
1333         sq_ctx = MLX5_ADDR_OF(create_sq_in, in, ctx);
1334         MLX5_SET(sqc, sq_ctx, rlky, sq_attr->rlky);
1335         MLX5_SET(sqc, sq_ctx, cd_master, sq_attr->cd_master);
1336         MLX5_SET(sqc, sq_ctx, fre, sq_attr->fre);
1337         MLX5_SET(sqc, sq_ctx, flush_in_error_en, sq_attr->flush_in_error_en);
1338         MLX5_SET(sqc, sq_ctx, allow_multi_pkt_send_wqe,
1339                  sq_attr->allow_multi_pkt_send_wqe);
1340         MLX5_SET(sqc, sq_ctx, min_wqe_inline_mode,
1341                  sq_attr->min_wqe_inline_mode);
1342         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1343         MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr);
1344         MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp);
1345         MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin);
1346         MLX5_SET(sqc, sq_ctx, non_wire, sq_attr->non_wire);
1347         MLX5_SET(sqc, sq_ctx, static_sq_wq, sq_attr->static_sq_wq);
1348         MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index);
1349         MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn);
1350         MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index,
1351                  sq_attr->packet_pacing_rate_limit_index);
1352         MLX5_SET(sqc, sq_ctx, tis_lst_sz, sq_attr->tis_lst_sz);
1353         MLX5_SET(sqc, sq_ctx, tis_num_0, sq_attr->tis_num);
1354         wq_ctx = MLX5_ADDR_OF(sqc, sq_ctx, wq);
1355         wq_attr = &sq_attr->wq_attr;
1356         devx_cmd_fill_wq_data(wq_ctx, wq_attr);
1357         sq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1358                                              out, sizeof(out));
1359         if (!sq->obj) {
1360                 DRV_LOG(ERR, "Failed to create SQ using DevX");
1361                 rte_errno = errno;
1362                 mlx5_free(sq);
1363                 return NULL;
1364         }
1365         sq->id = MLX5_GET(create_sq_out, out, sqn);
1366         return sq;
1367 }
1368
1369 /**
1370  * Modify SQ using DevX API.
1371  *
1372  * @param[in] sq
1373  *   Pointer to SQ object structure.
1374  * @param [in] sq_attr
1375  *   Pointer to SQ attributes structure.
1376  *
1377  * @return
1378  *   0 on success, a negative errno value otherwise and rte_errno is set.
1379  */
1380 int
1381 mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq,
1382                         struct mlx5_devx_modify_sq_attr *sq_attr)
1383 {
1384         uint32_t in[MLX5_ST_SZ_DW(modify_sq_in)] = {0};
1385         uint32_t out[MLX5_ST_SZ_DW(modify_sq_out)] = {0};
1386         void *sq_ctx;
1387         int ret;
1388
1389         MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ);
1390         MLX5_SET(modify_sq_in, in, sq_state, sq_attr->sq_state);
1391         MLX5_SET(modify_sq_in, in, sqn, sq->id);
1392         sq_ctx = MLX5_ADDR_OF(modify_sq_in, in, ctx);
1393         MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1394         MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq);
1395         MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca);
1396         ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in),
1397                                          out, sizeof(out));
1398         if (ret) {
1399                 DRV_LOG(ERR, "Failed to modify SQ using DevX");
1400                 rte_errno = errno;
1401                 return -rte_errno;
1402         }
1403         return ret;
1404 }
1405
1406 /**
1407  * Create TIS using DevX API.
1408  *
1409  * @param[in] ctx
1410  *   Context returned from mlx5 open_device() glue function.
1411  * @param [in] tis_attr
1412  *   Pointer to TIS attributes structure.
1413  *
1414  * @return
1415  *   The DevX object created, NULL otherwise and rte_errno is set.
1416  */
1417 struct mlx5_devx_obj *
1418 mlx5_devx_cmd_create_tis(void *ctx,
1419                          struct mlx5_devx_tis_attr *tis_attr)
1420 {
1421         uint32_t in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
1422         uint32_t out[MLX5_ST_SZ_DW(create_tis_out)] = {0};
1423         struct mlx5_devx_obj *tis = NULL;
1424         void *tis_ctx;
1425
1426         tis = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tis), 0, SOCKET_ID_ANY);
1427         if (!tis) {
1428                 DRV_LOG(ERR, "Failed to allocate TIS object");
1429                 rte_errno = ENOMEM;
1430                 return NULL;
1431         }
1432         MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS);
1433         tis_ctx = MLX5_ADDR_OF(create_tis_in, in, ctx);
1434         MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1435                  tis_attr->strict_lag_tx_port_affinity);
1436         MLX5_SET(tisc, tis_ctx, lag_tx_port_affinity,
1437                  tis_attr->lag_tx_port_affinity);
1438         MLX5_SET(tisc, tis_ctx, prio, tis_attr->prio);
1439         MLX5_SET(tisc, tis_ctx, transport_domain,
1440                  tis_attr->transport_domain);
1441         tis->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1442                                               out, sizeof(out));
1443         if (!tis->obj) {
1444                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1445                 rte_errno = errno;
1446                 mlx5_free(tis);
1447                 return NULL;
1448         }
1449         tis->id = MLX5_GET(create_tis_out, out, tisn);
1450         return tis;
1451 }
1452
1453 /**
1454  * Create transport domain using DevX API.
1455  *
1456  * @param[in] ctx
1457  *   Context returned from mlx5 open_device() glue function.
1458  * @return
1459  *   The DevX object created, NULL otherwise and rte_errno is set.
1460  */
1461 struct mlx5_devx_obj *
1462 mlx5_devx_cmd_create_td(void *ctx)
1463 {
1464         uint32_t in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {0};
1465         uint32_t out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0};
1466         struct mlx5_devx_obj *td = NULL;
1467
1468         td = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*td), 0, SOCKET_ID_ANY);
1469         if (!td) {
1470                 DRV_LOG(ERR, "Failed to allocate TD object");
1471                 rte_errno = ENOMEM;
1472                 return NULL;
1473         }
1474         MLX5_SET(alloc_transport_domain_in, in, opcode,
1475                  MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN);
1476         td->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1477                                              out, sizeof(out));
1478         if (!td->obj) {
1479                 DRV_LOG(ERR, "Failed to create TIS using DevX");
1480                 rte_errno = errno;
1481                 mlx5_free(td);
1482                 return NULL;
1483         }
1484         td->id = MLX5_GET(alloc_transport_domain_out, out,
1485                            transport_domain);
1486         return td;
1487 }
1488
1489 /**
1490  * Dump all flows to file.
1491  *
1492  * @param[in] fdb_domain
1493  *   FDB domain.
1494  * @param[in] rx_domain
1495  *   RX domain.
1496  * @param[in] tx_domain
1497  *   TX domain.
1498  * @param[out] file
1499  *   Pointer to file stream.
1500  *
1501  * @return
1502  *   0 on success, a nagative value otherwise.
1503  */
1504 int
1505 mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused,
1506                         void *rx_domain __rte_unused,
1507                         void *tx_domain __rte_unused, FILE *file __rte_unused)
1508 {
1509         int ret = 0;
1510
1511 #ifdef HAVE_MLX5_DR_FLOW_DUMP
1512         if (fdb_domain) {
1513                 ret = mlx5_glue->dr_dump_domain(file, fdb_domain);
1514                 if (ret)
1515                         return ret;
1516         }
1517         MLX5_ASSERT(rx_domain);
1518         ret = mlx5_glue->dr_dump_domain(file, rx_domain);
1519         if (ret)
1520                 return ret;
1521         MLX5_ASSERT(tx_domain);
1522         ret = mlx5_glue->dr_dump_domain(file, tx_domain);
1523 #else
1524         ret = ENOTSUP;
1525 #endif
1526         return -ret;
1527 }
1528
1529 /*
1530  * Create CQ using DevX API.
1531  *
1532  * @param[in] ctx
1533  *   Context returned from mlx5 open_device() glue function.
1534  * @param [in] attr
1535  *   Pointer to CQ attributes structure.
1536  *
1537  * @return
1538  *   The DevX object created, NULL otherwise and rte_errno is set.
1539  */
1540 struct mlx5_devx_obj *
1541 mlx5_devx_cmd_create_cq(void *ctx, struct mlx5_devx_cq_attr *attr)
1542 {
1543         uint32_t in[MLX5_ST_SZ_DW(create_cq_in)] = {0};
1544         uint32_t out[MLX5_ST_SZ_DW(create_cq_out)] = {0};
1545         struct mlx5_devx_obj *cq_obj = mlx5_malloc(MLX5_MEM_ZERO,
1546                                                    sizeof(*cq_obj),
1547                                                    0, SOCKET_ID_ANY);
1548         void *cqctx = MLX5_ADDR_OF(create_cq_in, in, cq_context);
1549
1550         if (!cq_obj) {
1551                 DRV_LOG(ERR, "Failed to allocate CQ object memory.");
1552                 rte_errno = ENOMEM;
1553                 return NULL;
1554         }
1555         MLX5_SET(create_cq_in, in, opcode, MLX5_CMD_OP_CREATE_CQ);
1556         if (attr->db_umem_valid) {
1557                 MLX5_SET(cqc, cqctx, dbr_umem_valid, attr->db_umem_valid);
1558                 MLX5_SET(cqc, cqctx, dbr_umem_id, attr->db_umem_id);
1559                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_umem_offset);
1560         } else {
1561                 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr);
1562         }
1563         MLX5_SET(cqc, cqctx, cqe_sz, attr->cqe_size);
1564         MLX5_SET(cqc, cqctx, cc, attr->use_first_only);
1565         MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore);
1566         MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size);
1567         MLX5_SET(cqc, cqctx, log_page_size, attr->log_page_size -
1568                  MLX5_ADAPTER_PAGE_SHIFT);
1569         MLX5_SET(cqc, cqctx, c_eqn, attr->eqn);
1570         MLX5_SET(cqc, cqctx, uar_page, attr->uar_page_id);
1571         MLX5_SET(cqc, cqctx, cqe_comp_en, !!attr->cqe_comp_en);
1572         MLX5_SET(cqc, cqctx, mini_cqe_res_format,
1573                  attr->mini_cqe_res_format);
1574         MLX5_SET(cqc, cqctx, mini_cqe_res_format_ext,
1575                  attr->mini_cqe_res_format_ext);
1576         MLX5_SET(cqc, cqctx, cqe_sz, attr->cqe_size);
1577         if (attr->q_umem_valid) {
1578                 MLX5_SET(create_cq_in, in, cq_umem_valid, attr->q_umem_valid);
1579                 MLX5_SET(create_cq_in, in, cq_umem_id, attr->q_umem_id);
1580                 MLX5_SET64(create_cq_in, in, cq_umem_offset,
1581                            attr->q_umem_offset);
1582         }
1583         cq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1584                                                  sizeof(out));
1585         if (!cq_obj->obj) {
1586                 rte_errno = errno;
1587                 DRV_LOG(ERR, "Failed to create CQ using DevX errno=%d.", errno);
1588                 mlx5_free(cq_obj);
1589                 return NULL;
1590         }
1591         cq_obj->id = MLX5_GET(create_cq_out, out, cqn);
1592         return cq_obj;
1593 }
1594
1595 /**
1596  * Create VIRTQ using DevX API.
1597  *
1598  * @param[in] ctx
1599  *   Context returned from mlx5 open_device() glue function.
1600  * @param [in] attr
1601  *   Pointer to VIRTQ attributes structure.
1602  *
1603  * @return
1604  *   The DevX object created, NULL otherwise and rte_errno is set.
1605  */
1606 struct mlx5_devx_obj *
1607 mlx5_devx_cmd_create_virtq(void *ctx,
1608                            struct mlx5_devx_virtq_attr *attr)
1609 {
1610         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1611         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1612         struct mlx5_devx_obj *virtq_obj = mlx5_malloc(MLX5_MEM_ZERO,
1613                                                      sizeof(*virtq_obj),
1614                                                      0, SOCKET_ID_ANY);
1615         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1616         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1617         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1618
1619         if (!virtq_obj) {
1620                 DRV_LOG(ERR, "Failed to allocate virtq data.");
1621                 rte_errno = ENOMEM;
1622                 return NULL;
1623         }
1624         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1625                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1626         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1627                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1628         MLX5_SET16(virtio_net_q, virtq, hw_available_index,
1629                    attr->hw_available_index);
1630         MLX5_SET16(virtio_net_q, virtq, hw_used_index, attr->hw_used_index);
1631         MLX5_SET16(virtio_net_q, virtq, tso_ipv4, attr->tso_ipv4);
1632         MLX5_SET16(virtio_net_q, virtq, tso_ipv6, attr->tso_ipv6);
1633         MLX5_SET16(virtio_net_q, virtq, tx_csum, attr->tx_csum);
1634         MLX5_SET16(virtio_net_q, virtq, rx_csum, attr->rx_csum);
1635         MLX5_SET16(virtio_q, virtctx, virtio_version_1_0,
1636                    attr->virtio_version_1_0);
1637         MLX5_SET16(virtio_q, virtctx, event_mode, attr->event_mode);
1638         MLX5_SET(virtio_q, virtctx, event_qpn_or_msix, attr->qp_id);
1639         MLX5_SET64(virtio_q, virtctx, desc_addr, attr->desc_addr);
1640         MLX5_SET64(virtio_q, virtctx, used_addr, attr->used_addr);
1641         MLX5_SET64(virtio_q, virtctx, available_addr, attr->available_addr);
1642         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1643         MLX5_SET16(virtio_q, virtctx, queue_size, attr->q_size);
1644         MLX5_SET(virtio_q, virtctx, virtio_q_mkey, attr->mkey);
1645         MLX5_SET(virtio_q, virtctx, umem_1_id, attr->umems[0].id);
1646         MLX5_SET(virtio_q, virtctx, umem_1_size, attr->umems[0].size);
1647         MLX5_SET64(virtio_q, virtctx, umem_1_offset, attr->umems[0].offset);
1648         MLX5_SET(virtio_q, virtctx, umem_2_id, attr->umems[1].id);
1649         MLX5_SET(virtio_q, virtctx, umem_2_size, attr->umems[1].size);
1650         MLX5_SET64(virtio_q, virtctx, umem_2_offset, attr->umems[1].offset);
1651         MLX5_SET(virtio_q, virtctx, umem_3_id, attr->umems[2].id);
1652         MLX5_SET(virtio_q, virtctx, umem_3_size, attr->umems[2].size);
1653         MLX5_SET64(virtio_q, virtctx, umem_3_offset, attr->umems[2].offset);
1654         MLX5_SET(virtio_q, virtctx, counter_set_id, attr->counters_obj_id);
1655         MLX5_SET(virtio_q, virtctx, pd, attr->pd);
1656         MLX5_SET(virtio_net_q, virtq, tisn_or_qpn, attr->tis_id);
1657         virtq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1658                                                     sizeof(out));
1659         if (!virtq_obj->obj) {
1660                 rte_errno = errno;
1661                 DRV_LOG(ERR, "Failed to create VIRTQ Obj using DevX.");
1662                 mlx5_free(virtq_obj);
1663                 return NULL;
1664         }
1665         virtq_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1666         return virtq_obj;
1667 }
1668
1669 /**
1670  * Modify VIRTQ using DevX API.
1671  *
1672  * @param[in] virtq_obj
1673  *   Pointer to virtq object structure.
1674  * @param [in] attr
1675  *   Pointer to modify virtq attributes structure.
1676  *
1677  * @return
1678  *   0 on success, a negative errno value otherwise and rte_errno is set.
1679  */
1680 int
1681 mlx5_devx_cmd_modify_virtq(struct mlx5_devx_obj *virtq_obj,
1682                            struct mlx5_devx_virtq_attr *attr)
1683 {
1684         uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1685         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1686         void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1687         void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1688         void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1689         int ret;
1690
1691         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1692                  MLX5_CMD_OP_MODIFY_GENERAL_OBJECT);
1693         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1694                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1695         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1696         MLX5_SET64(virtio_net_q, virtq, modify_field_select, attr->type);
1697         MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1698         switch (attr->type) {
1699         case MLX5_VIRTQ_MODIFY_TYPE_STATE:
1700                 MLX5_SET16(virtio_net_q, virtq, state, attr->state);
1701                 break;
1702         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS:
1703                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_mkey,
1704                          attr->dirty_bitmap_mkey);
1705                 MLX5_SET64(virtio_net_q, virtq, dirty_bitmap_addr,
1706                          attr->dirty_bitmap_addr);
1707                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_size,
1708                          attr->dirty_bitmap_size);
1709                 break;
1710         case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE:
1711                 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_dump_enable,
1712                          attr->dirty_bitmap_dump_enable);
1713                 break;
1714         default:
1715                 rte_errno = EINVAL;
1716                 return -rte_errno;
1717         }
1718         ret = mlx5_glue->devx_obj_modify(virtq_obj->obj, in, sizeof(in),
1719                                          out, sizeof(out));
1720         if (ret) {
1721                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1722                 rte_errno = errno;
1723                 return -rte_errno;
1724         }
1725         return ret;
1726 }
1727
1728 /**
1729  * Query VIRTQ using DevX API.
1730  *
1731  * @param[in] virtq_obj
1732  *   Pointer to virtq object structure.
1733  * @param [in/out] attr
1734  *   Pointer to virtq attributes structure.
1735  *
1736  * @return
1737  *   0 on success, a negative errno value otherwise and rte_errno is set.
1738  */
1739 int
1740 mlx5_devx_cmd_query_virtq(struct mlx5_devx_obj *virtq_obj,
1741                            struct mlx5_devx_virtq_attr *attr)
1742 {
1743         uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1744         uint32_t out[MLX5_ST_SZ_DW(query_virtq_out)] = {0};
1745         void *hdr = MLX5_ADDR_OF(query_virtq_out, in, hdr);
1746         void *virtq = MLX5_ADDR_OF(query_virtq_out, out, virtq);
1747         int ret;
1748
1749         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1750                  MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1751         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1752                  MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1753         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1754         ret = mlx5_glue->devx_obj_query(virtq_obj->obj, in, sizeof(in),
1755                                          out, sizeof(out));
1756         if (ret) {
1757                 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1758                 rte_errno = errno;
1759                 return -errno;
1760         }
1761         attr->hw_available_index = MLX5_GET16(virtio_net_q, virtq,
1762                                               hw_available_index);
1763         attr->hw_used_index = MLX5_GET16(virtio_net_q, virtq, hw_used_index);
1764         attr->state = MLX5_GET16(virtio_net_q, virtq, state);
1765         attr->error_type = MLX5_GET16(virtio_net_q, virtq,
1766                                       virtio_q_context.error_type);
1767         return ret;
1768 }
1769
1770 /**
1771  * Create QP using DevX API.
1772  *
1773  * @param[in] ctx
1774  *   Context returned from mlx5 open_device() glue function.
1775  * @param [in] attr
1776  *   Pointer to QP attributes structure.
1777  *
1778  * @return
1779  *   The DevX object created, NULL otherwise and rte_errno is set.
1780  */
1781 struct mlx5_devx_obj *
1782 mlx5_devx_cmd_create_qp(void *ctx,
1783                         struct mlx5_devx_qp_attr *attr)
1784 {
1785         uint32_t in[MLX5_ST_SZ_DW(create_qp_in)] = {0};
1786         uint32_t out[MLX5_ST_SZ_DW(create_qp_out)] = {0};
1787         struct mlx5_devx_obj *qp_obj = mlx5_malloc(MLX5_MEM_ZERO,
1788                                                    sizeof(*qp_obj),
1789                                                    0, SOCKET_ID_ANY);
1790         void *qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
1791
1792         if (!qp_obj) {
1793                 DRV_LOG(ERR, "Failed to allocate QP data.");
1794                 rte_errno = ENOMEM;
1795                 return NULL;
1796         }
1797         MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
1798         MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
1799         MLX5_SET(qpc, qpc, pd, attr->pd);
1800         if (attr->uar_index) {
1801                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1802                 MLX5_SET(qpc, qpc, uar_page, attr->uar_index);
1803                 MLX5_SET(qpc, qpc, log_page_size, attr->log_page_size -
1804                          MLX5_ADAPTER_PAGE_SHIFT);
1805                 if (attr->sq_size) {
1806                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->sq_size));
1807                         MLX5_SET(qpc, qpc, cqn_snd, attr->cqn);
1808                         MLX5_SET(qpc, qpc, log_sq_size,
1809                                  rte_log2_u32(attr->sq_size));
1810                 } else {
1811                         MLX5_SET(qpc, qpc, no_sq, 1);
1812                 }
1813                 if (attr->rq_size) {
1814                         MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->rq_size));
1815                         MLX5_SET(qpc, qpc, cqn_rcv, attr->cqn);
1816                         MLX5_SET(qpc, qpc, log_rq_stride, attr->log_rq_stride -
1817                                  MLX5_LOG_RQ_STRIDE_SHIFT);
1818                         MLX5_SET(qpc, qpc, log_rq_size,
1819                                  rte_log2_u32(attr->rq_size));
1820                         MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ);
1821                 } else {
1822                         MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1823                 }
1824                 if (attr->dbr_umem_valid) {
1825                         MLX5_SET(qpc, qpc, dbr_umem_valid,
1826                                  attr->dbr_umem_valid);
1827                         MLX5_SET(qpc, qpc, dbr_umem_id, attr->dbr_umem_id);
1828                 }
1829                 MLX5_SET64(qpc, qpc, dbr_addr, attr->dbr_address);
1830                 MLX5_SET64(create_qp_in, in, wq_umem_offset,
1831                            attr->wq_umem_offset);
1832                 MLX5_SET(create_qp_in, in, wq_umem_id, attr->wq_umem_id);
1833                 MLX5_SET(create_qp_in, in, wq_umem_valid, 1);
1834         } else {
1835                 /* Special QP to be managed by FW - no SQ\RQ\CQ\UAR\DB rec. */
1836                 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1837                 MLX5_SET(qpc, qpc, no_sq, 1);
1838         }
1839         qp_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1840                                                  sizeof(out));
1841         if (!qp_obj->obj) {
1842                 rte_errno = errno;
1843                 DRV_LOG(ERR, "Failed to create QP Obj using DevX.");
1844                 mlx5_free(qp_obj);
1845                 return NULL;
1846         }
1847         qp_obj->id = MLX5_GET(create_qp_out, out, qpn);
1848         return qp_obj;
1849 }
1850
1851 /**
1852  * Modify QP using DevX API.
1853  * Currently supports only force loop-back QP.
1854  *
1855  * @param[in] qp
1856  *   Pointer to QP object structure.
1857  * @param [in] qp_st_mod_op
1858  *   The QP state modification operation.
1859  * @param [in] remote_qp_id
1860  *   The remote QP ID for MLX5_CMD_OP_INIT2RTR_QP operation.
1861  *
1862  * @return
1863  *   0 on success, a negative errno value otherwise and rte_errno is set.
1864  */
1865 int
1866 mlx5_devx_cmd_modify_qp_state(struct mlx5_devx_obj *qp, uint32_t qp_st_mod_op,
1867                               uint32_t remote_qp_id)
1868 {
1869         union {
1870                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_in)];
1871                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_in)];
1872                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_in)];
1873         } in;
1874         union {
1875                 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_out)];
1876                 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_out)];
1877                 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_out)];
1878         } out;
1879         void *qpc;
1880         int ret;
1881         unsigned int inlen;
1882         unsigned int outlen;
1883
1884         memset(&in, 0, sizeof(in));
1885         memset(&out, 0, sizeof(out));
1886         MLX5_SET(rst2init_qp_in, &in, opcode, qp_st_mod_op);
1887         switch (qp_st_mod_op) {
1888         case MLX5_CMD_OP_RST2INIT_QP:
1889                 MLX5_SET(rst2init_qp_in, &in, qpn, qp->id);
1890                 qpc = MLX5_ADDR_OF(rst2init_qp_in, &in, qpc);
1891                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1892                 MLX5_SET(qpc, qpc, rre, 1);
1893                 MLX5_SET(qpc, qpc, rwe, 1);
1894                 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1895                 inlen = sizeof(in.rst2init);
1896                 outlen = sizeof(out.rst2init);
1897                 break;
1898         case MLX5_CMD_OP_INIT2RTR_QP:
1899                 MLX5_SET(init2rtr_qp_in, &in, qpn, qp->id);
1900                 qpc = MLX5_ADDR_OF(init2rtr_qp_in, &in, qpc);
1901                 MLX5_SET(qpc, qpc, primary_address_path.fl, 1);
1902                 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1903                 MLX5_SET(qpc, qpc, mtu, 1);
1904                 MLX5_SET(qpc, qpc, log_msg_max, 30);
1905                 MLX5_SET(qpc, qpc, remote_qpn, remote_qp_id);
1906                 MLX5_SET(qpc, qpc, min_rnr_nak, 0);
1907                 inlen = sizeof(in.init2rtr);
1908                 outlen = sizeof(out.init2rtr);
1909                 break;
1910         case MLX5_CMD_OP_RTR2RTS_QP:
1911                 qpc = MLX5_ADDR_OF(rtr2rts_qp_in, &in, qpc);
1912                 MLX5_SET(rtr2rts_qp_in, &in, qpn, qp->id);
1913                 MLX5_SET(qpc, qpc, primary_address_path.ack_timeout, 14);
1914                 MLX5_SET(qpc, qpc, log_ack_req_freq, 0);
1915                 MLX5_SET(qpc, qpc, retry_count, 7);
1916                 MLX5_SET(qpc, qpc, rnr_retry, 7);
1917                 inlen = sizeof(in.rtr2rts);
1918                 outlen = sizeof(out.rtr2rts);
1919                 break;
1920         default:
1921                 DRV_LOG(ERR, "Invalid or unsupported QP modify op %u.",
1922                         qp_st_mod_op);
1923                 rte_errno = EINVAL;
1924                 return -rte_errno;
1925         }
1926         ret = mlx5_glue->devx_obj_modify(qp->obj, &in, inlen, &out, outlen);
1927         if (ret) {
1928                 DRV_LOG(ERR, "Failed to modify QP using DevX.");
1929                 rte_errno = errno;
1930                 return -rte_errno;
1931         }
1932         return ret;
1933 }
1934
1935 struct mlx5_devx_obj *
1936 mlx5_devx_cmd_create_virtio_q_counters(void *ctx)
1937 {
1938         uint32_t in[MLX5_ST_SZ_DW(create_virtio_q_counters_in)] = {0};
1939         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1940         struct mlx5_devx_obj *couners_obj = mlx5_malloc(MLX5_MEM_ZERO,
1941                                                        sizeof(*couners_obj), 0,
1942                                                        SOCKET_ID_ANY);
1943         void *hdr = MLX5_ADDR_OF(create_virtio_q_counters_in, in, hdr);
1944
1945         if (!couners_obj) {
1946                 DRV_LOG(ERR, "Failed to allocate virtio queue counters data.");
1947                 rte_errno = ENOMEM;
1948                 return NULL;
1949         }
1950         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1951                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1952         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1953                  MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS);
1954         couners_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1955                                                       sizeof(out));
1956         if (!couners_obj->obj) {
1957                 rte_errno = errno;
1958                 DRV_LOG(ERR, "Failed to create virtio queue counters Obj using"
1959                         " DevX.");
1960                 mlx5_free(couners_obj);
1961                 return NULL;
1962         }
1963         couners_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1964         return couners_obj;
1965 }
1966
1967 int
1968 mlx5_devx_cmd_query_virtio_q_counters(struct mlx5_devx_obj *couners_obj,
1969                                    struct mlx5_devx_virtio_q_couners_attr *attr)
1970 {
1971         uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1972         uint32_t out[MLX5_ST_SZ_DW(query_virtio_q_counters_out)] = {0};
1973         void *hdr = MLX5_ADDR_OF(query_virtio_q_counters_out, in, hdr);
1974         void *virtio_q_counters = MLX5_ADDR_OF(query_virtio_q_counters_out, out,
1975                                                virtio_q_counters);
1976         int ret;
1977
1978         MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1979                  MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1980         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1981                  MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS);
1982         MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, couners_obj->id);
1983         ret = mlx5_glue->devx_obj_query(couners_obj->obj, in, sizeof(in), out,
1984                                         sizeof(out));
1985         if (ret) {
1986                 DRV_LOG(ERR, "Failed to query virtio q counters using DevX.");
1987                 rte_errno = errno;
1988                 return -errno;
1989         }
1990         attr->received_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters,
1991                                          received_desc);
1992         attr->completed_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters,
1993                                           completed_desc);
1994         attr->error_cqes = MLX5_GET(virtio_q_counters, virtio_q_counters,
1995                                     error_cqes);
1996         attr->bad_desc_errors = MLX5_GET(virtio_q_counters, virtio_q_counters,
1997                                          bad_desc_errors);
1998         attr->exceed_max_chain = MLX5_GET(virtio_q_counters, virtio_q_counters,
1999                                           exceed_max_chain);
2000         attr->invalid_buffer = MLX5_GET(virtio_q_counters, virtio_q_counters,
2001                                         invalid_buffer);
2002         return ret;
2003 }
2004
2005 /**
2006  * Create general object of type FLOW_HIT_ASO using DevX API.
2007  *
2008  * @param[in] ctx
2009  *   Context returned from mlx5 open_device() glue function.
2010  * @param [in] pd
2011  *   PD value to associate the FLOW_HIT_ASO object with.
2012  *
2013  * @return
2014  *   The DevX object created, NULL otherwise and rte_errno is set.
2015  */
2016 struct mlx5_devx_obj *
2017 mlx5_devx_cmd_create_flow_hit_aso_obj(void *ctx, uint32_t pd)
2018 {
2019         uint32_t in[MLX5_ST_SZ_DW(create_flow_hit_aso_in)] = {0};
2020         uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
2021         struct mlx5_devx_obj *flow_hit_aso_obj = NULL;
2022         void *ptr = NULL;
2023
2024         flow_hit_aso_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*flow_hit_aso_obj),
2025                                        0, SOCKET_ID_ANY);
2026         if (!flow_hit_aso_obj) {
2027                 DRV_LOG(ERR, "Failed to allocate FLOW_HIT_ASO object data");
2028                 rte_errno = ENOMEM;
2029                 return NULL;
2030         }
2031         ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, hdr);
2032         MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode,
2033                  MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
2034         MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type,
2035                  MLX5_GENERAL_OBJ_TYPE_FLOW_HIT_ASO);
2036         ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, flow_hit_aso);
2037         MLX5_SET(flow_hit_aso, ptr, access_pd, pd);
2038         flow_hit_aso_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
2039                                                            out, sizeof(out));
2040         if (!flow_hit_aso_obj->obj) {
2041                 rte_errno = errno;
2042                 DRV_LOG(ERR, "Failed to create FLOW_HIT_ASO obj using DevX.");
2043                 mlx5_free(flow_hit_aso_obj);
2044                 return NULL;
2045         }
2046         flow_hit_aso_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
2047         return flow_hit_aso_obj;
2048 }