drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  *
   3  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
   4  *   Copyright 2016 NXP
   5  *
   6  */
   7
   8 #include <time.h>
   9 #include <net/if.h>
  10
  11 #include <rte_mbuf.h>
  12 #include <rte_cryptodev.h>
  13 #include <rte_security_driver.h>
  14 #include <rte_malloc.h>
  15 #include <rte_memcpy.h>
  16 #include <rte_string_fns.h>
  17 #include <rte_cycles.h>
  18 #include <rte_kvargs.h>
  19 #include <rte_dev.h>
  20 #include <rte_cryptodev_pmd.h>
  21 #include <rte_common.h>
  22 #include <rte_fslmc.h>
  23 #include <fslmc_vfio.h>
  24 #include <dpaa2_hw_pvt.h>
  25 #include <dpaa2_hw_dpio.h>
  26 #include <dpaa2_hw_mempool.h>
  27 #include <fsl_dpseci.h>
  28 #include <fsl_mc_sys.h>
  29
  30 #include "dpaa2_sec_priv.h"
  31 #include "dpaa2_sec_logs.h"
  32
  33 /* Required types */
  34 typedef uint64_t        dma_addr_t;
  35
  36 /* RTA header files */
  37 #include <hw/desc/ipsec.h>
  38 #include <hw/desc/algo.h>
  39
  40 /* Minimum job descriptor consists of a oneword job descriptor HEADER and
  41  * a pointer to the shared descriptor
  42  */
  43 #define MIN_JOB_DESC_SIZE       (CAAM_CMD_SZ + CAAM_PTR_SZ)
  44 #define FSL_VENDOR_ID           0x1957
  45 #define FSL_DEVICE_ID           0x410
  46 #define FSL_SUBSYSTEM_SEC       1
  47 #define FSL_MC_DPSECI_DEVID     3
  48
  49 #define NO_PREFETCH 0
  50 /* FLE_POOL_NUM_BUFS is set as per the ipsec-secgw application */
  51 #define FLE_POOL_NUM_BUFS       32000
  52 #define FLE_POOL_BUF_SIZE       256
  53 #define FLE_POOL_CACHE_SIZE     512
  54 #define FLE_SG_MEM_SIZE         2048
  55 #define SEC_FLC_DHR_OUTBOUND    -114
  56 #define SEC_FLC_DHR_INBOUND     0
  57
  58 enum rta_sec_era rta_sec_era = RTA_SEC_ERA_8;
  59
  60 static uint8_t cryptodev_driver_id;
  61
  62 int dpaa2_logtype_sec;
  63
  64 static inline int
  65 build_proto_compound_fd(dpaa2_sec_session *sess,
  66                struct rte_crypto_op *op,
  67                struct qbman_fd *fd, uint16_t bpid)
  68 {
  69         struct rte_crypto_sym_op *sym_op = op->sym;
  70         struct ctxt_priv *priv = sess->ctxt;
  71         struct qbman_fle *fle, *ip_fle, *op_fle;
  72         struct sec_flow_context *flc;
  73         struct rte_mbuf *src_mbuf = sym_op->m_src;
  74         struct rte_mbuf *dst_mbuf = sym_op->m_dst;
  75         int retval;
  76
  77         /* Save the shared descriptor */
  78         flc = &priv->flc_desc[0].flc;
  79
  80         /* we are using the first FLE entry to store Mbuf */
  81         retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
  82         if (retval) {
  83                 DPAA2_SEC_ERR("Memory alloc failed");
  84                 return -1;
  85         }
  86         memset(fle, 0, FLE_POOL_BUF_SIZE);
  87         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
  88         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
  89
  90         op_fle = fle + 1;
  91         ip_fle = fle + 2;
  92
  93         if (likely(bpid < MAX_BPID)) {
  94                 DPAA2_SET_FD_BPID(fd, bpid);
  95                 DPAA2_SET_FLE_BPID(op_fle, bpid);
  96                 DPAA2_SET_FLE_BPID(ip_fle, bpid);
  97         } else {
  98                 DPAA2_SET_FD_IVP(fd);
  99                 DPAA2_SET_FLE_IVP(op_fle);
 100                 DPAA2_SET_FLE_IVP(ip_fle);
 101         }
 102
 103         /* Configure FD as a FRAME LIST */
 104         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(op_fle));
 105         DPAA2_SET_FD_COMPOUND_FMT(fd);
 106         DPAA2_SET_FD_FLC(fd, (ptrdiff_t)flc);
 107
 108         /* Configure Output FLE with dst mbuf data  */
 109         DPAA2_SET_FLE_ADDR(op_fle, DPAA2_MBUF_VADDR_TO_IOVA(dst_mbuf));
 110         DPAA2_SET_FLE_OFFSET(op_fle, dst_mbuf->data_off);
 111         DPAA2_SET_FLE_LEN(op_fle, dst_mbuf->buf_len);
 112
 113         /* Configure Input FLE with src mbuf data */
 114         DPAA2_SET_FLE_ADDR(ip_fle, DPAA2_MBUF_VADDR_TO_IOVA(src_mbuf));
 115         DPAA2_SET_FLE_OFFSET(ip_fle, src_mbuf->data_off);
 116         DPAA2_SET_FLE_LEN(ip_fle, src_mbuf->pkt_len);
 117
 118         DPAA2_SET_FD_LEN(fd, ip_fle->length);
 119         DPAA2_SET_FLE_FIN(ip_fle);
 120
 121         return 0;
 122
 123 }
 124
 125 static inline int
 126 build_proto_fd(dpaa2_sec_session *sess,
 127                struct rte_crypto_op *op,
 128                struct qbman_fd *fd, uint16_t bpid)
 129 {
 130         struct rte_crypto_sym_op *sym_op = op->sym;
 131         if (sym_op->m_dst)
 132                 return build_proto_compound_fd(sess, op, fd, bpid);
 133
 134         struct ctxt_priv *priv = sess->ctxt;
 135         struct sec_flow_context *flc;
 136         struct rte_mbuf *mbuf = sym_op->m_src;
 137
 138         if (likely(bpid < MAX_BPID))
 139                 DPAA2_SET_FD_BPID(fd, bpid);
 140         else
 141                 DPAA2_SET_FD_IVP(fd);
 142
 143         /* Save the shared descriptor */
 144         flc = &priv->flc_desc[0].flc;
 145
 146         DPAA2_SET_FD_ADDR(fd, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
 147         DPAA2_SET_FD_OFFSET(fd, sym_op->m_src->data_off);
 148         DPAA2_SET_FD_LEN(fd, sym_op->m_src->pkt_len);
 149         DPAA2_SET_FD_FLC(fd, (ptrdiff_t)flc);
 150
 151         /* save physical address of mbuf */
 152         op->sym->aead.digest.phys_addr = mbuf->buf_iova;
 153         mbuf->buf_iova = (size_t)op;
 154
 155         return 0;
 156 }
 157
 158 static inline int
 159 build_authenc_gcm_sg_fd(dpaa2_sec_session *sess,
 160                  struct rte_crypto_op *op,
 161                  struct qbman_fd *fd, __rte_unused uint16_t bpid)
 162 {
 163         struct rte_crypto_sym_op *sym_op = op->sym;
 164         struct ctxt_priv *priv = sess->ctxt;
 165         struct qbman_fle *fle, *sge, *ip_fle, *op_fle;
 166         struct sec_flow_context *flc;
 167         uint32_t auth_only_len = sess->ext_params.aead_ctxt.auth_only_len;
 168         int icv_len = sess->digest_length;
 169         uint8_t *old_icv;
 170         struct rte_mbuf *mbuf;
 171         uint8_t *IV_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
 172                         sess->iv.offset);
 173
 174         PMD_INIT_FUNC_TRACE();
 175
 176         if (sym_op->m_dst)
 177                 mbuf = sym_op->m_dst;
 178         else
 179                 mbuf = sym_op->m_src;
 180
 181         /* first FLE entry used to store mbuf and session ctxt */
 182         fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
 183                         RTE_CACHE_LINE_SIZE);
 184         if (unlikely(!fle)) {
 185                 DPAA2_SEC_ERR("GCM SG: Memory alloc failed for SGE");
 186                 return -1;
 187         }
 188         memset(fle, 0, FLE_SG_MEM_SIZE);
 189         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 190         DPAA2_FLE_SAVE_CTXT(fle, (size_t)priv);
 191
 192         op_fle = fle + 1;
 193         ip_fle = fle + 2;
 194         sge = fle + 3;
 195
 196         /* Save the shared descriptor */
 197         flc = &priv->flc_desc[0].flc;
 198
 199         /* Configure FD as a FRAME LIST */
 200         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(op_fle));
 201         DPAA2_SET_FD_COMPOUND_FMT(fd);
 202         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 203
 204         DPAA2_SEC_DP_DEBUG("GCM SG: auth_off: 0x%x/length %d, digest-len=%d\n"
 205                    "iv-len=%d data_off: 0x%x\n",
 206                    sym_op->aead.data.offset,
 207                    sym_op->aead.data.length,
 208                    sess->digest_length,
 209                    sess->iv.length,
 210                    sym_op->m_src->data_off);
 211
 212         /* Configure Output FLE with Scatter/Gather Entry */
 213         DPAA2_SET_FLE_SG_EXT(op_fle);
 214         DPAA2_SET_FLE_ADDR(op_fle, DPAA2_VADDR_TO_IOVA(sge));
 215
 216         if (auth_only_len)
 217                 DPAA2_SET_FLE_INTERNAL_JD(op_fle, auth_only_len);
 218
 219         op_fle->length = (sess->dir == DIR_ENC) ?
 220                         (sym_op->aead.data.length + icv_len + auth_only_len) :
 221                         sym_op->aead.data.length + auth_only_len;
 222
 223         /* Configure Output SGE for Encap/Decap */
 224         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 225         DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off + sym_op->aead.data.offset -
 226                                                                 auth_only_len);
 227         sge->length = mbuf->data_len - sym_op->aead.data.offset + auth_only_len;
 228
 229         mbuf = mbuf->next;
 230         /* o/p segs */
 231         while (mbuf) {
 232                 sge++;
 233                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 234                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 235                 sge->length = mbuf->data_len;
 236                 mbuf = mbuf->next;
 237         }
 238         sge->length -= icv_len;
 239
 240         if (sess->dir == DIR_ENC) {
 241                 sge++;
 242                 DPAA2_SET_FLE_ADDR(sge,
 243                                 DPAA2_VADDR_TO_IOVA(sym_op->aead.digest.data));
 244                 sge->length = icv_len;
 245         }
 246         DPAA2_SET_FLE_FIN(sge);
 247
 248         sge++;
 249         mbuf = sym_op->m_src;
 250
 251         /* Configure Input FLE with Scatter/Gather Entry */
 252         DPAA2_SET_FLE_ADDR(ip_fle, DPAA2_VADDR_TO_IOVA(sge));
 253         DPAA2_SET_FLE_SG_EXT(ip_fle);
 254         DPAA2_SET_FLE_FIN(ip_fle);
 255         ip_fle->length = (sess->dir == DIR_ENC) ?
 256                 (sym_op->aead.data.length + sess->iv.length + auth_only_len) :
 257                 (sym_op->aead.data.length + sess->iv.length + auth_only_len +
 258                  icv_len);
 259
 260         /* Configure Input SGE for Encap/Decap */
 261         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(IV_ptr));
 262         sge->length = sess->iv.length;
 263
 264         sge++;
 265         if (auth_only_len) {
 266                 DPAA2_SET_FLE_ADDR(sge,
 267                                 DPAA2_VADDR_TO_IOVA(sym_op->aead.aad.data));
 268                 sge->length = auth_only_len;
 269                 sge++;
 270         }
 271
 272         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 273         DPAA2_SET_FLE_OFFSET(sge, sym_op->aead.data.offset +
 274                                 mbuf->data_off);
 275         sge->length = mbuf->data_len - sym_op->aead.data.offset;
 276
 277         mbuf = mbuf->next;
 278         /* i/p segs */
 279         while (mbuf) {
 280                 sge++;
 281                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 282                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 283                 sge->length = mbuf->data_len;
 284                 mbuf = mbuf->next;
 285         }
 286
 287         if (sess->dir == DIR_DEC) {
 288                 sge++;
 289                 old_icv = (uint8_t *)(sge + 1);
 290                 memcpy(old_icv, sym_op->aead.digest.data, icv_len);
 291                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv));
 292                 sge->length = icv_len;
 293         }
 294
 295         DPAA2_SET_FLE_FIN(sge);
 296         if (auth_only_len) {
 297                 DPAA2_SET_FLE_INTERNAL_JD(ip_fle, auth_only_len);
 298                 DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len);
 299         }
 300         DPAA2_SET_FD_LEN(fd, ip_fle->length);
 301
 302         return 0;
 303 }
 304
 305 static inline int
 306 build_authenc_gcm_fd(dpaa2_sec_session *sess,
 307                      struct rte_crypto_op *op,
 308                      struct qbman_fd *fd, uint16_t bpid)
 309 {
 310         struct rte_crypto_sym_op *sym_op = op->sym;
 311         struct ctxt_priv *priv = sess->ctxt;
 312         struct qbman_fle *fle, *sge;
 313         struct sec_flow_context *flc;
 314         uint32_t auth_only_len = sess->ext_params.aead_ctxt.auth_only_len;
 315         int icv_len = sess->digest_length, retval;
 316         uint8_t *old_icv;
 317         struct rte_mbuf *dst;
 318         uint8_t *IV_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
 319                         sess->iv.offset);
 320
 321         PMD_INIT_FUNC_TRACE();
 322
 323         if (sym_op->m_dst)
 324                 dst = sym_op->m_dst;
 325         else
 326                 dst = sym_op->m_src;
 327
 328         /* TODO we are using the first FLE entry to store Mbuf and session ctxt.
 329          * Currently we donot know which FLE has the mbuf stored.
 330          * So while retreiving we can go back 1 FLE from the FD -ADDR
 331          * to get the MBUF Addr from the previous FLE.
 332          * We can have a better approach to use the inline Mbuf
 333          */
 334         retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
 335         if (retval) {
 336                 DPAA2_SEC_ERR("GCM: Memory alloc failed for SGE");
 337                 return -1;
 338         }
 339         memset(fle, 0, FLE_POOL_BUF_SIZE);
 340         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 341         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 342         fle = fle + 1;
 343         sge = fle + 2;
 344         if (likely(bpid < MAX_BPID)) {
 345                 DPAA2_SET_FD_BPID(fd, bpid);
 346                 DPAA2_SET_FLE_BPID(fle, bpid);
 347                 DPAA2_SET_FLE_BPID(fle + 1, bpid);
 348                 DPAA2_SET_FLE_BPID(sge, bpid);
 349                 DPAA2_SET_FLE_BPID(sge + 1, bpid);
 350                 DPAA2_SET_FLE_BPID(sge + 2, bpid);
 351                 DPAA2_SET_FLE_BPID(sge + 3, bpid);
 352         } else {
 353                 DPAA2_SET_FD_IVP(fd);
 354                 DPAA2_SET_FLE_IVP(fle);
 355                 DPAA2_SET_FLE_IVP((fle + 1));
 356                 DPAA2_SET_FLE_IVP(sge);
 357                 DPAA2_SET_FLE_IVP((sge + 1));
 358                 DPAA2_SET_FLE_IVP((sge + 2));
 359                 DPAA2_SET_FLE_IVP((sge + 3));
 360         }
 361
 362         /* Save the shared descriptor */
 363         flc = &priv->flc_desc[0].flc;
 364         /* Configure FD as a FRAME LIST */
 365         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
 366         DPAA2_SET_FD_COMPOUND_FMT(fd);
 367         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 368
 369         DPAA2_SEC_DP_DEBUG("GCM: auth_off: 0x%x/length %d, digest-len=%d\n"
 370                    "iv-len=%d data_off: 0x%x\n",
 371                    sym_op->aead.data.offset,
 372                    sym_op->aead.data.length,
 373                    sess->digest_length,
 374                    sess->iv.length,
 375                    sym_op->m_src->data_off);
 376
 377         /* Configure Output FLE with Scatter/Gather Entry */
 378         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
 379         if (auth_only_len)
 380                 DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
 381         fle->length = (sess->dir == DIR_ENC) ?
 382                         (sym_op->aead.data.length + icv_len + auth_only_len) :
 383                         sym_op->aead.data.length + auth_only_len;
 384
 385         DPAA2_SET_FLE_SG_EXT(fle);
 386
 387         /* Configure Output SGE for Encap/Decap */
 388         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(dst));
 389         DPAA2_SET_FLE_OFFSET(sge, sym_op->aead.data.offset +
 390                                 dst->data_off - auth_only_len);
 391         sge->length = sym_op->aead.data.length + auth_only_len;
 392
 393         if (sess->dir == DIR_ENC) {
 394                 sge++;
 395                 DPAA2_SET_FLE_ADDR(sge,
 396                                 DPAA2_VADDR_TO_IOVA(sym_op->aead.digest.data));
 397                 sge->length = sess->digest_length;
 398                 DPAA2_SET_FD_LEN(fd, (sym_op->aead.data.length +
 399                                         sess->iv.length + auth_only_len));
 400         }
 401         DPAA2_SET_FLE_FIN(sge);
 402
 403         sge++;
 404         fle++;
 405
 406         /* Configure Input FLE with Scatter/Gather Entry */
 407         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
 408         DPAA2_SET_FLE_SG_EXT(fle);
 409         DPAA2_SET_FLE_FIN(fle);
 410         fle->length = (sess->dir == DIR_ENC) ?
 411                 (sym_op->aead.data.length + sess->iv.length + auth_only_len) :
 412                 (sym_op->aead.data.length + sess->iv.length + auth_only_len +
 413                  sess->digest_length);
 414
 415         /* Configure Input SGE for Encap/Decap */
 416         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(IV_ptr));
 417         sge->length = sess->iv.length;
 418         sge++;
 419         if (auth_only_len) {
 420                 DPAA2_SET_FLE_ADDR(sge,
 421                                 DPAA2_VADDR_TO_IOVA(sym_op->aead.aad.data));
 422                 sge->length = auth_only_len;
 423                 DPAA2_SET_FLE_BPID(sge, bpid);
 424                 sge++;
 425         }
 426
 427         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
 428         DPAA2_SET_FLE_OFFSET(sge, sym_op->aead.data.offset +
 429                                 sym_op->m_src->data_off);
 430         sge->length = sym_op->aead.data.length;
 431         if (sess->dir == DIR_DEC) {
 432                 sge++;
 433                 old_icv = (uint8_t *)(sge + 1);
 434                 memcpy(old_icv, sym_op->aead.digest.data,
 435                        sess->digest_length);
 436                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv));
 437                 sge->length = sess->digest_length;
 438                 DPAA2_SET_FD_LEN(fd, (sym_op->aead.data.length +
 439                                  sess->digest_length +
 440                                  sess->iv.length +
 441                                  auth_only_len));
 442         }
 443         DPAA2_SET_FLE_FIN(sge);
 444
 445         if (auth_only_len) {
 446                 DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
 447                 DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len);
 448         }
 449
 450         return 0;
 451 }
 452
 453 static inline int
 454 build_authenc_sg_fd(dpaa2_sec_session *sess,
 455                  struct rte_crypto_op *op,
 456                  struct qbman_fd *fd, __rte_unused uint16_t bpid)
 457 {
 458         struct rte_crypto_sym_op *sym_op = op->sym;
 459         struct ctxt_priv *priv = sess->ctxt;
 460         struct qbman_fle *fle, *sge, *ip_fle, *op_fle;
 461         struct sec_flow_context *flc;
 462         uint32_t auth_only_len = sym_op->auth.data.length -
 463                                 sym_op->cipher.data.length;
 464         int icv_len = sess->digest_length;
 465         uint8_t *old_icv;
 466         struct rte_mbuf *mbuf;
 467         uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
 468                         sess->iv.offset);
 469
 470         PMD_INIT_FUNC_TRACE();
 471
 472         if (sym_op->m_dst)
 473                 mbuf = sym_op->m_dst;
 474         else
 475                 mbuf = sym_op->m_src;
 476
 477         /* first FLE entry used to store mbuf and session ctxt */
 478         fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
 479                         RTE_CACHE_LINE_SIZE);
 480         if (unlikely(!fle)) {
 481                 DPAA2_SEC_ERR("AUTHENC SG: Memory alloc failed for SGE");
 482                 return -1;
 483         }
 484         memset(fle, 0, FLE_SG_MEM_SIZE);
 485         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 486         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 487
 488         op_fle = fle + 1;
 489         ip_fle = fle + 2;
 490         sge = fle + 3;
 491
 492         /* Save the shared descriptor */
 493         flc = &priv->flc_desc[0].flc;
 494
 495         /* Configure FD as a FRAME LIST */
 496         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(op_fle));
 497         DPAA2_SET_FD_COMPOUND_FMT(fd);
 498         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 499
 500         DPAA2_SEC_DP_DEBUG(
 501                 "AUTHENC SG: auth_off: 0x%x/length %d, digest-len=%d\n"
 502                 "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
 503                 sym_op->auth.data.offset,
 504                 sym_op->auth.data.length,
 505                 sess->digest_length,
 506                 sym_op->cipher.data.offset,
 507                 sym_op->cipher.data.length,
 508                 sess->iv.length,
 509                 sym_op->m_src->data_off);
 510
 511         /* Configure Output FLE with Scatter/Gather Entry */
 512         DPAA2_SET_FLE_SG_EXT(op_fle);
 513         DPAA2_SET_FLE_ADDR(op_fle, DPAA2_VADDR_TO_IOVA(sge));
 514
 515         if (auth_only_len)
 516                 DPAA2_SET_FLE_INTERNAL_JD(op_fle, auth_only_len);
 517
 518         op_fle->length = (sess->dir == DIR_ENC) ?
 519                         (sym_op->cipher.data.length + icv_len) :
 520                         sym_op->cipher.data.length;
 521
 522         /* Configure Output SGE for Encap/Decap */
 523         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 524         DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off + sym_op->auth.data.offset);
 525         sge->length = mbuf->data_len - sym_op->auth.data.offset;
 526
 527         mbuf = mbuf->next;
 528         /* o/p segs */
 529         while (mbuf) {
 530                 sge++;
 531                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 532                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 533                 sge->length = mbuf->data_len;
 534                 mbuf = mbuf->next;
 535         }
 536         sge->length -= icv_len;
 537
 538         if (sess->dir == DIR_ENC) {
 539                 sge++;
 540                 DPAA2_SET_FLE_ADDR(sge,
 541                                 DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
 542                 sge->length = icv_len;
 543         }
 544         DPAA2_SET_FLE_FIN(sge);
 545
 546         sge++;
 547         mbuf = sym_op->m_src;
 548
 549         /* Configure Input FLE with Scatter/Gather Entry */
 550         DPAA2_SET_FLE_ADDR(ip_fle, DPAA2_VADDR_TO_IOVA(sge));
 551         DPAA2_SET_FLE_SG_EXT(ip_fle);
 552         DPAA2_SET_FLE_FIN(ip_fle);
 553         ip_fle->length = (sess->dir == DIR_ENC) ?
 554                         (sym_op->auth.data.length + sess->iv.length) :
 555                         (sym_op->auth.data.length + sess->iv.length +
 556                          icv_len);
 557
 558         /* Configure Input SGE for Encap/Decap */
 559         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(iv_ptr));
 560         sge->length = sess->iv.length;
 561
 562         sge++;
 563         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 564         DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset +
 565                                 mbuf->data_off);
 566         sge->length = mbuf->data_len - sym_op->auth.data.offset;
 567
 568         mbuf = mbuf->next;
 569         /* i/p segs */
 570         while (mbuf) {
 571                 sge++;
 572                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 573                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 574                 sge->length = mbuf->data_len;
 575                 mbuf = mbuf->next;
 576         }
 577         sge->length -= icv_len;
 578
 579         if (sess->dir == DIR_DEC) {
 580                 sge++;
 581                 old_icv = (uint8_t *)(sge + 1);
 582                 memcpy(old_icv, sym_op->auth.digest.data,
 583                        icv_len);
 584                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv));
 585                 sge->length = icv_len;
 586         }
 587
 588         DPAA2_SET_FLE_FIN(sge);
 589         if (auth_only_len) {
 590                 DPAA2_SET_FLE_INTERNAL_JD(ip_fle, auth_only_len);
 591                 DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len);
 592         }
 593         DPAA2_SET_FD_LEN(fd, ip_fle->length);
 594
 595         return 0;
 596 }
 597
 598 static inline int
 599 build_authenc_fd(dpaa2_sec_session *sess,
 600                  struct rte_crypto_op *op,
 601                  struct qbman_fd *fd, uint16_t bpid)
 602 {
 603         struct rte_crypto_sym_op *sym_op = op->sym;
 604         struct ctxt_priv *priv = sess->ctxt;
 605         struct qbman_fle *fle, *sge;
 606         struct sec_flow_context *flc;
 607         uint32_t auth_only_len = sym_op->auth.data.length -
 608                                 sym_op->cipher.data.length;
 609         int icv_len = sess->digest_length, retval;
 610         uint8_t *old_icv;
 611         uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
 612                         sess->iv.offset);
 613         struct rte_mbuf *dst;
 614
 615         PMD_INIT_FUNC_TRACE();
 616
 617         if (sym_op->m_dst)
 618                 dst = sym_op->m_dst;
 619         else
 620                 dst = sym_op->m_src;
 621
 622         /* we are using the first FLE entry to store Mbuf.
 623          * Currently we donot know which FLE has the mbuf stored.
 624          * So while retreiving we can go back 1 FLE from the FD -ADDR
 625          * to get the MBUF Addr from the previous FLE.
 626          * We can have a better approach to use the inline Mbuf
 627          */
 628         retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
 629         if (retval) {
 630                 DPAA2_SEC_ERR("Memory alloc failed for SGE");
 631                 return -1;
 632         }
 633         memset(fle, 0, FLE_POOL_BUF_SIZE);
 634         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 635         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 636         fle = fle + 1;
 637         sge = fle + 2;
 638         if (likely(bpid < MAX_BPID)) {
 639                 DPAA2_SET_FD_BPID(fd, bpid);
 640                 DPAA2_SET_FLE_BPID(fle, bpid);
 641                 DPAA2_SET_FLE_BPID(fle + 1, bpid);
 642                 DPAA2_SET_FLE_BPID(sge, bpid);
 643                 DPAA2_SET_FLE_BPID(sge + 1, bpid);
 644                 DPAA2_SET_FLE_BPID(sge + 2, bpid);
 645                 DPAA2_SET_FLE_BPID(sge + 3, bpid);
 646         } else {
 647                 DPAA2_SET_FD_IVP(fd);
 648                 DPAA2_SET_FLE_IVP(fle);
 649                 DPAA2_SET_FLE_IVP((fle + 1));
 650                 DPAA2_SET_FLE_IVP(sge);
 651                 DPAA2_SET_FLE_IVP((sge + 1));
 652                 DPAA2_SET_FLE_IVP((sge + 2));
 653                 DPAA2_SET_FLE_IVP((sge + 3));
 654         }
 655
 656         /* Save the shared descriptor */
 657         flc = &priv->flc_desc[0].flc;
 658         /* Configure FD as a FRAME LIST */
 659         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
 660         DPAA2_SET_FD_COMPOUND_FMT(fd);
 661         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 662
 663         DPAA2_SEC_DP_DEBUG(
 664                 "AUTHENC: auth_off: 0x%x/length %d, digest-len=%d\n"
 665                 "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
 666                 sym_op->auth.data.offset,
 667                 sym_op->auth.data.length,
 668                 sess->digest_length,
 669                 sym_op->cipher.data.offset,
 670                 sym_op->cipher.data.length,
 671                 sess->iv.length,
 672                 sym_op->m_src->data_off);
 673
 674         /* Configure Output FLE with Scatter/Gather Entry */
 675         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
 676         if (auth_only_len)
 677                 DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
 678         fle->length = (sess->dir == DIR_ENC) ?
 679                         (sym_op->cipher.data.length + icv_len) :
 680                         sym_op->cipher.data.length;
 681
 682         DPAA2_SET_FLE_SG_EXT(fle);
 683
 684         /* Configure Output SGE for Encap/Decap */
 685         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(dst));
 686         DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
 687                                 dst->data_off);
 688         sge->length = sym_op->cipher.data.length;
 689
 690         if (sess->dir == DIR_ENC) {
 691                 sge++;
 692                 DPAA2_SET_FLE_ADDR(sge,
 693                                 DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
 694                 sge->length = sess->digest_length;
 695                 DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length +
 696                                         sess->iv.length));
 697         }
 698         DPAA2_SET_FLE_FIN(sge);
 699
 700         sge++;
 701         fle++;
 702
 703         /* Configure Input FLE with Scatter/Gather Entry */
 704         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
 705         DPAA2_SET_FLE_SG_EXT(fle);
 706         DPAA2_SET_FLE_FIN(fle);
 707         fle->length = (sess->dir == DIR_ENC) ?
 708                         (sym_op->auth.data.length + sess->iv.length) :
 709                         (sym_op->auth.data.length + sess->iv.length +
 710                          sess->digest_length);
 711
 712         /* Configure Input SGE for Encap/Decap */
 713         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(iv_ptr));
 714         sge->length = sess->iv.length;
 715         sge++;
 716
 717         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
 718         DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset +
 719                                 sym_op->m_src->data_off);
 720         sge->length = sym_op->auth.data.length;
 721         if (sess->dir == DIR_DEC) {
 722                 sge++;
 723                 old_icv = (uint8_t *)(sge + 1);
 724                 memcpy(old_icv, sym_op->auth.digest.data,
 725                        sess->digest_length);
 726                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv));
 727                 sge->length = sess->digest_length;
 728                 DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length +
 729                                  sess->digest_length +
 730                                  sess->iv.length));
 731         }
 732         DPAA2_SET_FLE_FIN(sge);
 733         if (auth_only_len) {
 734                 DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
 735                 DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len);
 736         }
 737         return 0;
 738 }
 739
 740 static inline int build_auth_sg_fd(
 741                 dpaa2_sec_session *sess,
 742                 struct rte_crypto_op *op,
 743                 struct qbman_fd *fd,
 744                 __rte_unused uint16_t bpid)
 745 {
 746         struct rte_crypto_sym_op *sym_op = op->sym;
 747         struct qbman_fle *fle, *sge, *ip_fle, *op_fle;
 748         struct sec_flow_context *flc;
 749         struct ctxt_priv *priv = sess->ctxt;
 750         uint8_t *old_digest;
 751         struct rte_mbuf *mbuf;
 752
 753         PMD_INIT_FUNC_TRACE();
 754
 755         mbuf = sym_op->m_src;
 756         fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
 757                         RTE_CACHE_LINE_SIZE);
 758         if (unlikely(!fle)) {
 759                 DPAA2_SEC_ERR("AUTH SG: Memory alloc failed for SGE");
 760                 return -1;
 761         }
 762         memset(fle, 0, FLE_SG_MEM_SIZE);
 763         /* first FLE entry used to store mbuf and session ctxt */
 764         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 765         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 766         op_fle = fle + 1;
 767         ip_fle = fle + 2;
 768         sge = fle + 3;
 769
 770         flc = &priv->flc_desc[DESC_INITFINAL].flc;
 771         /* sg FD */
 772         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 773         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(op_fle));
 774         DPAA2_SET_FD_COMPOUND_FMT(fd);
 775
 776         /* o/p fle */
 777         DPAA2_SET_FLE_ADDR(op_fle,
 778                                 DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
 779         op_fle->length = sess->digest_length;
 780
 781         /* i/p fle */
 782         DPAA2_SET_FLE_SG_EXT(ip_fle);
 783         DPAA2_SET_FLE_ADDR(ip_fle, DPAA2_VADDR_TO_IOVA(sge));
 784         /* i/p 1st seg */
 785         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 786         DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset + mbuf->data_off);
 787         sge->length = mbuf->data_len - sym_op->auth.data.offset;
 788
 789         /* i/p segs */
 790         mbuf = mbuf->next;
 791         while (mbuf) {
 792                 sge++;
 793                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 794                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 795                 sge->length = mbuf->data_len;
 796                 mbuf = mbuf->next;
 797         }
 798         if (sess->dir == DIR_ENC) {
 799                 /* Digest calculation case */
 800                 sge->length -= sess->digest_length;
 801                 ip_fle->length = sym_op->auth.data.length;
 802         } else {
 803                 /* Digest verification case */
 804                 sge++;
 805                 old_digest = (uint8_t *)(sge + 1);
 806                 rte_memcpy(old_digest, sym_op->auth.digest.data,
 807                            sess->digest_length);
 808                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_digest));
 809                 sge->length = sess->digest_length;
 810                 ip_fle->length = sym_op->auth.data.length +
 811                                 sess->digest_length;
 812         }
 813         DPAA2_SET_FLE_FIN(sge);
 814         DPAA2_SET_FLE_FIN(ip_fle);
 815         DPAA2_SET_FD_LEN(fd, ip_fle->length);
 816
 817         return 0;
 818 }
 819
 820 static inline int
 821 build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 822               struct qbman_fd *fd, uint16_t bpid)
 823 {
 824         struct rte_crypto_sym_op *sym_op = op->sym;
 825         struct qbman_fle *fle, *sge;
 826         struct sec_flow_context *flc;
 827         struct ctxt_priv *priv = sess->ctxt;
 828         uint8_t *old_digest;
 829         int retval;
 830
 831         PMD_INIT_FUNC_TRACE();
 832
 833         retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
 834         if (retval) {
 835                 DPAA2_SEC_ERR("AUTH Memory alloc failed for SGE");
 836                 return -1;
 837         }
 838         memset(fle, 0, FLE_POOL_BUF_SIZE);
 839         /* TODO we are using the first FLE entry to store Mbuf.
 840          * Currently we donot know which FLE has the mbuf stored.
 841          * So while retreiving we can go back 1 FLE from the FD -ADDR
 842          * to get the MBUF Addr from the previous FLE.
 843          * We can have a better approach to use the inline Mbuf
 844          */
 845         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 846         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 847         fle = fle + 1;
 848
 849         if (likely(bpid < MAX_BPID)) {
 850                 DPAA2_SET_FD_BPID(fd, bpid);
 851                 DPAA2_SET_FLE_BPID(fle, bpid);
 852                 DPAA2_SET_FLE_BPID(fle + 1, bpid);
 853         } else {
 854                 DPAA2_SET_FD_IVP(fd);
 855                 DPAA2_SET_FLE_IVP(fle);
 856                 DPAA2_SET_FLE_IVP((fle + 1));
 857         }
 858         flc = &priv->flc_desc[DESC_INITFINAL].flc;
 859         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
 860
 861         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
 862         fle->length = sess->digest_length;
 863
 864         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
 865         DPAA2_SET_FD_COMPOUND_FMT(fd);
 866         fle++;
 867
 868         if (sess->dir == DIR_ENC) {
 869                 DPAA2_SET_FLE_ADDR(fle,
 870                                    DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
 871                 DPAA2_SET_FLE_OFFSET(fle, sym_op->auth.data.offset +
 872                                      sym_op->m_src->data_off);
 873                 DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length);
 874                 fle->length = sym_op->auth.data.length;
 875         } else {
 876                 sge = fle + 2;
 877                 DPAA2_SET_FLE_SG_EXT(fle);
 878                 DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
 879
 880                 if (likely(bpid < MAX_BPID)) {
 881                         DPAA2_SET_FLE_BPID(sge, bpid);
 882                         DPAA2_SET_FLE_BPID(sge + 1, bpid);
 883                 } else {
 884                         DPAA2_SET_FLE_IVP(sge);
 885                         DPAA2_SET_FLE_IVP((sge + 1));
 886                 }
 887                 DPAA2_SET_FLE_ADDR(sge,
 888                                    DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
 889                 DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset +
 890                                      sym_op->m_src->data_off);
 891
 892                 DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length +
 893                                  sess->digest_length);
 894                 sge->length = sym_op->auth.data.length;
 895                 sge++;
 896                 old_digest = (uint8_t *)(sge + 1);
 897                 rte_memcpy(old_digest, sym_op->auth.digest.data,
 898                            sess->digest_length);
 899                 DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_digest));
 900                 sge->length = sess->digest_length;
 901                 fle->length = sym_op->auth.data.length +
 902                                 sess->digest_length;
 903                 DPAA2_SET_FLE_FIN(sge);
 904         }
 905         DPAA2_SET_FLE_FIN(fle);
 906
 907         return 0;
 908 }
 909
 910 static int
 911 build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
 912                 struct qbman_fd *fd, __rte_unused uint16_t bpid)
 913 {
 914         struct rte_crypto_sym_op *sym_op = op->sym;
 915         struct qbman_fle *ip_fle, *op_fle, *sge, *fle;
 916         struct sec_flow_context *flc;
 917         struct ctxt_priv *priv = sess->ctxt;
 918         struct rte_mbuf *mbuf;
 919         uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
 920                         sess->iv.offset);
 921
 922         PMD_INIT_FUNC_TRACE();
 923
 924         if (sym_op->m_dst)
 925                 mbuf = sym_op->m_dst;
 926         else
 927                 mbuf = sym_op->m_src;
 928
 929         fle = (struct qbman_fle *)rte_malloc(NULL, FLE_SG_MEM_SIZE,
 930                         RTE_CACHE_LINE_SIZE);
 931         if (!fle) {
 932                 DPAA2_SEC_ERR("CIPHER SG: Memory alloc failed for SGE");
 933                 return -1;
 934         }
 935         memset(fle, 0, FLE_SG_MEM_SIZE);
 936         /* first FLE entry used to store mbuf and session ctxt */
 937         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
 938         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
 939
 940         op_fle = fle + 1;
 941         ip_fle = fle + 2;
 942         sge = fle + 3;
 943
 944         flc = &priv->flc_desc[0].flc;
 945
 946         DPAA2_SEC_DP_DEBUG(
 947                 "CIPHER SG: cipher_off: 0x%x/length %d, ivlen=%d"
 948                 " data_off: 0x%x\n",
 949                 sym_op->cipher.data.offset,
 950                 sym_op->cipher.data.length,
 951                 sess->iv.length,
 952                 sym_op->m_src->data_off);
 953
 954         /* o/p fle */
 955         DPAA2_SET_FLE_ADDR(op_fle, DPAA2_VADDR_TO_IOVA(sge));
 956         op_fle->length = sym_op->cipher.data.length;
 957         DPAA2_SET_FLE_SG_EXT(op_fle);
 958
 959         /* o/p 1st seg */
 960         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 961         DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset + mbuf->data_off);
 962         sge->length = mbuf->data_len - sym_op->cipher.data.offset;
 963
 964         mbuf = mbuf->next;
 965         /* o/p segs */
 966         while (mbuf) {
 967                 sge++;
 968                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 969                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
 970                 sge->length = mbuf->data_len;
 971                 mbuf = mbuf->next;
 972         }
 973         DPAA2_SET_FLE_FIN(sge);
 974
 975         DPAA2_SEC_DP_DEBUG(
 976                 "CIPHER SG: 1 - flc = %p, fle = %p FLEaddr = %x-%x, len %d\n",
 977                 flc, fle, fle->addr_hi, fle->addr_lo,
 978                 fle->length);
 979
 980         /* i/p fle */
 981         mbuf = sym_op->m_src;
 982         sge++;
 983         DPAA2_SET_FLE_ADDR(ip_fle, DPAA2_VADDR_TO_IOVA(sge));
 984         ip_fle->length = sess->iv.length + sym_op->cipher.data.length;
 985         DPAA2_SET_FLE_SG_EXT(ip_fle);
 986
 987         /* i/p IV */
 988         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(iv_ptr));
 989         DPAA2_SET_FLE_OFFSET(sge, 0);
 990         sge->length = sess->iv.length;
 991
 992         sge++;
 993
 994         /* i/p 1st seg */
 995         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
 996         DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
 997                              mbuf->data_off);
 998         sge->length = mbuf->data_len - sym_op->cipher.data.offset;
 999
1000         mbuf = mbuf->next;
1001         /* i/p segs */
1002         while (mbuf) {
1003                 sge++;
1004                 DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(mbuf));
1005                 DPAA2_SET_FLE_OFFSET(sge, mbuf->data_off);
1006                 sge->length = mbuf->data_len;
1007                 mbuf = mbuf->next;
1008         }
1009         DPAA2_SET_FLE_FIN(sge);
1010         DPAA2_SET_FLE_FIN(ip_fle);
1011
1012         /* sg fd */
1013         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(op_fle));
1014         DPAA2_SET_FD_LEN(fd, ip_fle->length);
1015         DPAA2_SET_FD_COMPOUND_FMT(fd);
1016         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
1017
1018         DPAA2_SEC_DP_DEBUG(
1019                 "CIPHER SG: fdaddr =%" PRIx64 " bpid =%d meta =%d"
1020                 " off =%d, len =%d\n",
1021                 DPAA2_GET_FD_ADDR(fd),
1022                 DPAA2_GET_FD_BPID(fd),
1023                 rte_dpaa2_bpid_info[bpid].meta_data_size,
1024                 DPAA2_GET_FD_OFFSET(fd),
1025                 DPAA2_GET_FD_LEN(fd));
1026         return 0;
1027 }
1028
1029 static int
1030 build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
1031                 struct qbman_fd *fd, uint16_t bpid)
1032 {
1033         struct rte_crypto_sym_op *sym_op = op->sym;
1034         struct qbman_fle *fle, *sge;
1035         int retval;
1036         struct sec_flow_context *flc;
1037         struct ctxt_priv *priv = sess->ctxt;
1038         uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
1039                         sess->iv.offset);
1040         struct rte_mbuf *dst;
1041
1042         PMD_INIT_FUNC_TRACE();
1043
1044         if (sym_op->m_dst)
1045                 dst = sym_op->m_dst;
1046         else
1047                 dst = sym_op->m_src;
1048
1049         retval = rte_mempool_get(priv->fle_pool, (void **)(&fle));
1050         if (retval) {
1051                 DPAA2_SEC_ERR("CIPHER: Memory alloc failed for SGE");
1052                 return -1;
1053         }
1054         memset(fle, 0, FLE_POOL_BUF_SIZE);
1055         /* TODO we are using the first FLE entry to store Mbuf.
1056          * Currently we donot know which FLE has the mbuf stored.
1057          * So while retreiving we can go back 1 FLE from the FD -ADDR
1058          * to get the MBUF Addr from the previous FLE.
1059          * We can have a better approach to use the inline Mbuf
1060          */
1061         DPAA2_SET_FLE_ADDR(fle, (size_t)op);
1062         DPAA2_FLE_SAVE_CTXT(fle, (ptrdiff_t)priv);
1063         fle = fle + 1;
1064         sge = fle + 2;
1065
1066         if (likely(bpid < MAX_BPID)) {
1067                 DPAA2_SET_FD_BPID(fd, bpid);
1068                 DPAA2_SET_FLE_BPID(fle, bpid);
1069                 DPAA2_SET_FLE_BPID(fle + 1, bpid);
1070                 DPAA2_SET_FLE_BPID(sge, bpid);
1071                 DPAA2_SET_FLE_BPID(sge + 1, bpid);
1072         } else {
1073                 DPAA2_SET_FD_IVP(fd);
1074                 DPAA2_SET_FLE_IVP(fle);
1075                 DPAA2_SET_FLE_IVP((fle + 1));
1076                 DPAA2_SET_FLE_IVP(sge);
1077                 DPAA2_SET_FLE_IVP((sge + 1));
1078         }
1079
1080         flc = &priv->flc_desc[0].flc;
1081         DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
1082         DPAA2_SET_FD_LEN(fd, sym_op->cipher.data.length +
1083                          sess->iv.length);
1084         DPAA2_SET_FD_COMPOUND_FMT(fd);
1085         DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
1086
1087         DPAA2_SEC_DP_DEBUG(
1088                 "CIPHER: cipher_off: 0x%x/length %d, ivlen=%d,"
1089                 " data_off: 0x%x\n",
1090                 sym_op->cipher.data.offset,
1091                 sym_op->cipher.data.length,
1092                 sess->iv.length,
1093                 sym_op->m_src->data_off);
1094
1095         DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(dst));
1096         DPAA2_SET_FLE_OFFSET(fle, sym_op->cipher.data.offset +
1097                              dst->data_off);
1098
1099         fle->length = sym_op->cipher.data.length + sess->iv.length;
1100
1101         DPAA2_SEC_DP_DEBUG(
1102                 "CIPHER: 1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d\n",
1103                 flc, fle, fle->addr_hi, fle->addr_lo,
1104                 fle->length);
1105
1106         fle++;
1107
1108         DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
1109         fle->length = sym_op->cipher.data.length + sess->iv.length;
1110
1111         DPAA2_SET_FLE_SG_EXT(fle);
1112
1113         DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(iv_ptr));
1114         sge->length = sess->iv.length;
1115
1116         sge++;
1117         DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
1118         DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
1119                              sym_op->m_src->data_off);
1120
1121         sge->length = sym_op->cipher.data.length;
1122         DPAA2_SET_FLE_FIN(sge);
1123         DPAA2_SET_FLE_FIN(fle);
1124
1125         DPAA2_SEC_DP_DEBUG(
1126                 "CIPHER: fdaddr =%" PRIx64 " bpid =%d meta =%d"
1127                 " off =%d, len =%d\n",
1128                 DPAA2_GET_FD_ADDR(fd),
1129                 DPAA2_GET_FD_BPID(fd),
1130                 rte_dpaa2_bpid_info[bpid].meta_data_size,
1131                 DPAA2_GET_FD_OFFSET(fd),
1132                 DPAA2_GET_FD_LEN(fd));
1133
1134         return 0;
1135 }
1136
1137 static inline int
1138 build_sec_fd(struct rte_crypto_op *op,
1139              struct qbman_fd *fd, uint16_t bpid)
1140 {
1141         int ret = -1;
1142         dpaa2_sec_session *sess;
1143
1144         PMD_INIT_FUNC_TRACE();
1145
1146         if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
1147                 sess = (dpaa2_sec_session *)get_sym_session_private_data(
1148                                 op->sym->session, cryptodev_driver_id);
1149         else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION)
1150                 sess = (dpaa2_sec_session *)get_sec_session_private_data(
1151                                 op->sym->sec_session);
1152         else
1153                 return -1;
1154
1155         /* Segmented buffer */
1156         if (unlikely(!rte_pktmbuf_is_contiguous(op->sym->m_src))) {
1157                 switch (sess->ctxt_type) {
1158                 case DPAA2_SEC_CIPHER:
1159                         ret = build_cipher_sg_fd(sess, op, fd, bpid);
1160                         break;
1161                 case DPAA2_SEC_AUTH:
1162                         ret = build_auth_sg_fd(sess, op, fd, bpid);
1163                         break;
1164                 case DPAA2_SEC_AEAD:
1165                         ret = build_authenc_gcm_sg_fd(sess, op, fd, bpid);
1166                         break;
1167                 case DPAA2_SEC_CIPHER_HASH:
1168                         ret = build_authenc_sg_fd(sess, op, fd, bpid);
1169                         break;
1170                 case DPAA2_SEC_HASH_CIPHER:
1171                 default:
1172                         DPAA2_SEC_ERR("error: Unsupported session");
1173                 }
1174         } else {
1175                 switch (sess->ctxt_type) {
1176                 case DPAA2_SEC_CIPHER:
1177                         ret = build_cipher_fd(sess, op, fd, bpid);
1178                         break;
1179                 case DPAA2_SEC_AUTH:
1180                         ret = build_auth_fd(sess, op, fd, bpid);
1181                         break;
1182                 case DPAA2_SEC_AEAD:
1183                         ret = build_authenc_gcm_fd(sess, op, fd, bpid);
1184                         break;
1185                 case DPAA2_SEC_CIPHER_HASH:
1186                         ret = build_authenc_fd(sess, op, fd, bpid);
1187                         break;
1188                 case DPAA2_SEC_IPSEC:
1189                         ret = build_proto_fd(sess, op, fd, bpid);
1190                         break;
1191                 case DPAA2_SEC_HASH_CIPHER:
1192                 default:
1193                         DPAA2_SEC_ERR("error: Unsupported session");
1194                 }
1195         }
1196         return ret;
1197 }
1198
1199 static uint16_t
1200 dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
1201                         uint16_t nb_ops)
1202 {
1203         /* Function to transmit the frames to given device and VQ*/
1204         uint32_t loop;
1205         int32_t ret;
1206         struct qbman_fd fd_arr[MAX_TX_RING_SLOTS];
1207         uint32_t frames_to_send;
1208         struct qbman_eq_desc eqdesc;
1209         struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp;
1210         struct qbman_swp *swp;
1211         uint16_t num_tx = 0;
1212         /*todo - need to support multiple buffer pools */
1213         uint16_t bpid;
1214         struct rte_mempool *mb_pool;
1215
1216         if (unlikely(nb_ops == 0))
1217                 return 0;
1218
1219         if (ops[0]->sess_type == RTE_CRYPTO_OP_SESSIONLESS) {
1220                 DPAA2_SEC_ERR("sessionless crypto op not supported");
1221                 return 0;
1222         }
1223         /*Prepare enqueue descriptor*/
1224         qbman_eq_desc_clear(&eqdesc);
1225         qbman_eq_desc_set_no_orp(&eqdesc, DPAA2_EQ_RESP_ERR_FQ);
1226         qbman_eq_desc_set_response(&eqdesc, 0, 0);
1227         qbman_eq_desc_set_fq(&eqdesc, dpaa2_qp->tx_vq.fqid);
1228
1229         if (!DPAA2_PER_LCORE_DPIO) {
1230                 ret = dpaa2_affine_qbman_swp();
1231                 if (ret) {
1232                         DPAA2_SEC_ERR("Failure in affining portal");
1233                         return 0;
1234                 }
1235         }
1236         swp = DPAA2_PER_LCORE_PORTAL;
1237
1238         while (nb_ops) {
1239                 frames_to_send = (nb_ops >> 3) ? MAX_TX_RING_SLOTS : nb_ops;
1240
1241                 for (loop = 0; loop < frames_to_send; loop++) {
1242                         /*Clear the unused FD fields before sending*/
1243                         memset(&fd_arr[loop], 0, sizeof(struct qbman_fd));
1244                         mb_pool = (*ops)->sym->m_src->pool;
1245                         bpid = mempool_to_bpid(mb_pool);
1246                         ret = build_sec_fd(*ops, &fd_arr[loop], bpid);
1247                         if (ret) {
1248                                 DPAA2_SEC_ERR("error: Improper packet contents"
1249                                               " for crypto operation");
1250                                 goto skip_tx;
1251                         }
1252                         ops++;
1253                 }
1254                 loop = 0;
1255                 while (loop < frames_to_send) {
1256                         loop += qbman_swp_enqueue_multiple(swp, &eqdesc,
1257                                                         &fd_arr[loop],
1258                                                         NULL,
1259                                                         frames_to_send - loop);
1260                 }
1261
1262                 num_tx += frames_to_send;
1263                 nb_ops -= frames_to_send;
1264         }
1265 skip_tx:
1266         dpaa2_qp->tx_vq.tx_pkts += num_tx;
1267         dpaa2_qp->tx_vq.err_pkts += nb_ops;
1268         return num_tx;
1269 }
1270
1271 static inline struct rte_crypto_op *
1272 sec_simple_fd_to_mbuf(const struct qbman_fd *fd, __rte_unused uint8_t id)
1273 {
1274         struct rte_crypto_op *op;
1275         uint16_t len = DPAA2_GET_FD_LEN(fd);
1276         uint16_t diff = 0;
1277         dpaa2_sec_session *sess_priv;
1278
1279         struct rte_mbuf *mbuf = DPAA2_INLINE_MBUF_FROM_BUF(
1280                 DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd)),
1281                 rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size);
1282
1283         op = (struct rte_crypto_op *)(size_t)mbuf->buf_iova;
1284         mbuf->buf_iova = op->sym->aead.digest.phys_addr;
1285         op->sym->aead.digest.phys_addr = 0L;
1286
1287         sess_priv = (dpaa2_sec_session *)get_sec_session_private_data(
1288                                 op->sym->sec_session);
1289         if (sess_priv->dir == DIR_ENC)
1290                 mbuf->data_off += SEC_FLC_DHR_OUTBOUND;
1291         else
1292                 mbuf->data_off += SEC_FLC_DHR_INBOUND;
1293         diff = len - mbuf->pkt_len;
1294         mbuf->pkt_len += diff;
1295         mbuf->data_len += diff;
1296
1297         return op;
1298 }
1299
1300 static inline struct rte_crypto_op *
1301 sec_fd_to_mbuf(const struct qbman_fd *fd, uint8_t driver_id)
1302 {
1303         struct qbman_fle *fle;
1304         struct rte_crypto_op *op;
1305         struct ctxt_priv *priv;
1306         struct rte_mbuf *dst, *src;
1307
1308         if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single)
1309                 return sec_simple_fd_to_mbuf(fd, driver_id);
1310
1311         fle = (struct qbman_fle *)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd));
1312
1313         DPAA2_SEC_DP_DEBUG("FLE addr = %x - %x, offset = %x\n",
1314                            fle->addr_hi, fle->addr_lo, fle->fin_bpid_offset);
1315
1316         /* we are using the first FLE entry to store Mbuf.
1317          * Currently we donot know which FLE has the mbuf stored.
1318          * So while retreiving we can go back 1 FLE from the FD -ADDR
1319          * to get the MBUF Addr from the previous FLE.
1320          * We can have a better approach to use the inline Mbuf
1321          */
1322
1323         if (unlikely(DPAA2_GET_FD_IVP(fd))) {
1324                 /* TODO complete it. */
1325                 DPAA2_SEC_ERR("error: non inline buffer");
1326                 return NULL;
1327         }
1328         op = (struct rte_crypto_op *)DPAA2_GET_FLE_ADDR((fle - 1));
1329
1330         /* Prefeth op */
1331         src = op->sym->m_src;
1332         rte_prefetch0(src);
1333
1334         if (op->sym->m_dst) {
1335                 dst = op->sym->m_dst;
1336                 rte_prefetch0(dst);
1337         } else
1338                 dst = src;
1339
1340         if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) {
1341                 dpaa2_sec_session *sess = (dpaa2_sec_session *)
1342                         get_sec_session_private_data(op->sym->sec_session);
1343                 if (sess->ctxt_type == DPAA2_SEC_IPSEC) {
1344                         uint16_t len = DPAA2_GET_FD_LEN(fd);
1345                         dst->pkt_len = len;
1346                         dst->data_len = len;
1347                 }
1348         }
1349
1350         DPAA2_SEC_DP_DEBUG("mbuf %p BMAN buf addr %p,"
1351                 " fdaddr =%" PRIx64 " bpid =%d meta =%d off =%d, len =%d\n",
1352                 (void *)dst,
1353                 dst->buf_addr,
1354                 DPAA2_GET_FD_ADDR(fd),
1355                 DPAA2_GET_FD_BPID(fd),
1356                 rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
1357                 DPAA2_GET_FD_OFFSET(fd),
1358                 DPAA2_GET_FD_LEN(fd));
1359
1360         /* free the fle memory */
1361         if (likely(rte_pktmbuf_is_contiguous(src))) {
1362                 priv = (struct ctxt_priv *)(size_t)DPAA2_GET_FLE_CTXT(fle - 1);
1363                 rte_mempool_put(priv->fle_pool, (void *)(fle-1));
1364         } else
1365                 rte_free((void *)(fle-1));
1366
1367         return op;
1368 }
1369
1370 static uint16_t
1371 dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
1372                         uint16_t nb_ops)
1373 {
1374         /* Function is responsible to receive frames for a given device and VQ*/
1375         struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp;
1376         struct rte_cryptodev *dev =
1377                         (struct rte_cryptodev *)(dpaa2_qp->rx_vq.dev);
1378         struct qbman_result *dq_storage;
1379         uint32_t fqid = dpaa2_qp->rx_vq.fqid;
1380         int ret, num_rx = 0;
1381         uint8_t is_last = 0, status;
1382         struct qbman_swp *swp;
1383         const struct qbman_fd *fd;
1384         struct qbman_pull_desc pulldesc;
1385
1386         if (!DPAA2_PER_LCORE_DPIO) {
1387                 ret = dpaa2_affine_qbman_swp();
1388                 if (ret) {
1389                         DPAA2_SEC_ERR("Failure in affining portal");
1390                         return 0;
1391                 }
1392         }
1393         swp = DPAA2_PER_LCORE_PORTAL;
1394         dq_storage = dpaa2_qp->rx_vq.q_storage->dq_storage[0];
1395
1396         qbman_pull_desc_clear(&pulldesc);
1397         qbman_pull_desc_set_numframes(&pulldesc,
1398                                       (nb_ops > DPAA2_DQRR_RING_SIZE) ?
1399                                       DPAA2_DQRR_RING_SIZE : nb_ops);
1400         qbman_pull_desc_set_fq(&pulldesc, fqid);
1401         qbman_pull_desc_set_storage(&pulldesc, dq_storage,
1402                                     (dma_addr_t)DPAA2_VADDR_TO_IOVA(dq_storage),
1403                                     1);
1404
1405         /*Issue a volatile dequeue command. */
1406         while (1) {
1407                 if (qbman_swp_pull(swp, &pulldesc)) {
1408                         DPAA2_SEC_WARN(
1409                                 "SEC VDQ command is not issued : QBMAN busy");
1410                         /* Portal was busy, try again */
1411                         continue;
1412                 }
1413                 break;
1414         };
1415
1416         /* Receive the packets till Last Dequeue entry is found with
1417          * respect to the above issues PULL command.
1418          */
1419         while (!is_last) {
1420                 /* Check if the previous issued command is completed.
1421                  * Also seems like the SWP is shared between the Ethernet Driver
1422                  * and the SEC driver.
1423                  */
1424                 while (!qbman_check_command_complete(dq_storage))
1425                         ;
1426
1427                 /* Loop until the dq_storage is updated with
1428                  * new token by QBMAN
1429                  */
1430                 while (!qbman_check_new_result(dq_storage))
1431                         ;
1432                 /* Check whether Last Pull command is Expired and
1433                  * setting Condition for Loop termination
1434                  */
1435                 if (qbman_result_DQ_is_pull_complete(dq_storage)) {
1436                         is_last = 1;
1437                         /* Check for valid frame. */
1438                         status = (uint8_t)qbman_result_DQ_flags(dq_storage);
1439                         if (unlikely(
1440                                 (status & QBMAN_DQ_STAT_VALIDFRAME) == 0)) {
1441                                 DPAA2_SEC_DP_DEBUG("No frame is delivered\n");
1442                                 continue;
1443                         }
1444                 }
1445
1446                 fd = qbman_result_DQ_fd(dq_storage);
1447                 ops[num_rx] = sec_fd_to_mbuf(fd, dev->driver_id);
1448
1449                 if (unlikely(fd->simple.frc)) {
1450                         /* TODO Parse SEC errors */
1451                         DPAA2_SEC_ERR("SEC returned Error - %x",
1452                                       fd->simple.frc);
1453                         ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_ERROR;
1454                 } else {
1455                         ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
1456                 }
1457
1458                 num_rx++;
1459                 dq_storage++;
1460         } /* End of Packet Rx loop */
1461
1462         dpaa2_qp->rx_vq.rx_pkts += num_rx;
1463
1464         DPAA2_SEC_DP_DEBUG("SEC Received %d Packets\n", num_rx);
1465         /*Return the total number of packets received to DPAA2 app*/
1466         return num_rx;
1467 }
1468
1469 /** Release queue pair */
1470 static int
1471 dpaa2_sec_queue_pair_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
1472 {
1473         struct dpaa2_sec_qp *qp =
1474                 (struct dpaa2_sec_qp *)dev->data->queue_pairs[queue_pair_id];
1475
1476         PMD_INIT_FUNC_TRACE();
1477
1478         if (qp->rx_vq.q_storage) {
1479                 dpaa2_free_dq_storage(qp->rx_vq.q_storage);
1480                 rte_free(qp->rx_vq.q_storage);
1481         }
1482         rte_free(qp);
1483
1484         dev->data->queue_pairs[queue_pair_id] = NULL;
1485
1486         return 0;
1487 }
1488
1489 /** Setup a queue pair */
1490 static int
1491 dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
1492                 __rte_unused const struct rte_cryptodev_qp_conf *qp_conf,
1493                 __rte_unused int socket_id,
1494                 __rte_unused struct rte_mempool *session_pool)
1495 {
1496         struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
1497         struct dpaa2_sec_qp *qp;
1498         struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
1499         struct dpseci_rx_queue_cfg cfg;
1500         int32_t retcode;
1501
1502         PMD_INIT_FUNC_TRACE();
1503
1504         /* If qp is already in use free ring memory and qp metadata. */
1505         if (dev->data->queue_pairs[qp_id] != NULL) {
1506                 DPAA2_SEC_INFO("QP already setup");
1507                 return 0;
1508         }
1509
1510         DPAA2_SEC_DEBUG("dev =%p, queue =%d, conf =%p",
1511                     dev, qp_id, qp_conf);
1512
1513         memset(&cfg, 0, sizeof(struct dpseci_rx_queue_cfg));
1514
1515         qp = rte_malloc(NULL, sizeof(struct dpaa2_sec_qp),
1516                         RTE_CACHE_LINE_SIZE);
1517         if (!qp) {
1518                 DPAA2_SEC_ERR("malloc failed for rx/tx queues");
1519                 return -1;
1520         }
1521
1522         qp->rx_vq.dev = dev;
1523         qp->tx_vq.dev = dev;
1524         qp->rx_vq.q_storage = rte_malloc("sec dq storage",
1525                 sizeof(struct queue_storage_info_t),
1526                 RTE_CACHE_LINE_SIZE);
1527         if (!qp->rx_vq.q_storage) {
1528                 DPAA2_SEC_ERR("malloc failed for q_storage");
1529                 return -1;
1530         }
1531         memset(qp->rx_vq.q_storage, 0, sizeof(struct queue_storage_info_t));
1532
1533         if (dpaa2_alloc_dq_storage(qp->rx_vq.q_storage)) {
1534                 DPAA2_SEC_ERR("Unable to allocate dequeue storage");
1535                 return -1;
1536         }
1537
1538         dev->data->queue_pairs[qp_id] = qp;
1539
1540         cfg.options = cfg.options | DPSECI_QUEUE_OPT_USER_CTX;
1541         cfg.user_ctx = (size_t)(&qp->rx_vq);
1542         retcode = dpseci_set_rx_queue(dpseci, CMD_PRI_LOW, priv->token,
1543                                       qp_id, &cfg);
1544         return retcode;
1545 }
1546
1547 /** Return the number of allocated queue pairs */
1548 static uint32_t
1549 dpaa2_sec_queue_pair_count(struct rte_cryptodev *dev)
1550 {
1551         PMD_INIT_FUNC_TRACE();
1552
1553         return dev->data->nb_queue_pairs;
1554 }
1555
1556 /** Returns the size of the aesni gcm session structure */
1557 static unsigned int
1558 dpaa2_sec_sym_session_get_size(struct rte_cryptodev *dev __rte_unused)
1559 {
1560         PMD_INIT_FUNC_TRACE();
1561
1562         return sizeof(dpaa2_sec_session);
1563 }
1564
1565 static int
1566 dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
1567                       struct rte_crypto_sym_xform *xform,
1568                       dpaa2_sec_session *session)
1569 {
1570         struct dpaa2_sec_dev_private *dev_priv = dev->data->dev_private;
1571         struct alginfo cipherdata;
1572         int bufsize, i;
1573         struct ctxt_priv *priv;
1574         struct sec_flow_context *flc;
1575
1576         PMD_INIT_FUNC_TRACE();
1577
1578         /* For SEC CIPHER only one descriptor is required. */
1579         priv = (struct ctxt_priv *)rte_zmalloc(NULL,
1580                         sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
1581                         RTE_CACHE_LINE_SIZE);
1582         if (priv == NULL) {
1583                 DPAA2_SEC_ERR("No Memory for priv CTXT");
1584                 return -1;
1585         }
1586
1587         priv->fle_pool = dev_priv->fle_pool;
1588
1589         flc = &priv->flc_desc[0].flc;
1590
1591         session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
1592                         RTE_CACHE_LINE_SIZE);
1593         if (session->cipher_key.data == NULL) {
1594                 DPAA2_SEC_ERR("No Memory for cipher key");
1595                 rte_free(priv);
1596                 return -1;
1597         }
1598         session->cipher_key.length = xform->cipher.key.length;
1599
1600         memcpy(session->cipher_key.data, xform->cipher.key.data,
1601                xform->cipher.key.length);
1602         cipherdata.key = (size_t)session->cipher_key.data;
1603         cipherdata.keylen = session->cipher_key.length;
1604         cipherdata.key_enc_flags = 0;
1605         cipherdata.key_type = RTA_DATA_IMM;
1606
1607         /* Set IV parameters */
1608         session->iv.offset = xform->cipher.iv.offset;
1609         session->iv.length = xform->cipher.iv.length;
1610
1611         switch (xform->cipher.algo) {
1612         case RTE_CRYPTO_CIPHER_AES_CBC:
1613                 cipherdata.algtype = OP_ALG_ALGSEL_AES;
1614                 cipherdata.algmode = OP_ALG_AAI_CBC;
1615                 session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC;
1616                 break;
1617         case RTE_CRYPTO_CIPHER_3DES_CBC:
1618                 cipherdata.algtype = OP_ALG_ALGSEL_3DES;
1619                 cipherdata.algmode = OP_ALG_AAI_CBC;
1620                 session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
1621                 break;
1622         case RTE_CRYPTO_CIPHER_AES_CTR:
1623                 cipherdata.algtype = OP_ALG_ALGSEL_AES;
1624                 cipherdata.algmode = OP_ALG_AAI_CTR;
1625                 session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CTR;
1626                 break;
1627         case RTE_CRYPTO_CIPHER_3DES_CTR:
1628         case RTE_CRYPTO_CIPHER_AES_ECB:
1629         case RTE_CRYPTO_CIPHER_3DES_ECB:
1630         case RTE_CRYPTO_CIPHER_AES_XTS:
1631         case RTE_CRYPTO_CIPHER_AES_F8:
1632         case RTE_CRYPTO_CIPHER_ARC4:
1633         case RTE_CRYPTO_CIPHER_KASUMI_F8:
1634         case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
1635         case RTE_CRYPTO_CIPHER_ZUC_EEA3:
1636         case RTE_CRYPTO_CIPHER_NULL:
1637                 DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
1638                         xform->cipher.algo);
1639                 goto error_out;
1640         default:
1641                 DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
1642                         xform->cipher.algo);
1643                 goto error_out;
1644         }
1645         session->dir = (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
1646                                 DIR_ENC : DIR_DEC;
1647
1648         bufsize = cnstr_shdsc_blkcipher(priv->flc_desc[0].desc, 1, 0,
1649                                         &cipherdata, NULL, session->iv.length,
1650                                         session->dir);
1651         if (bufsize < 0) {
1652                 DPAA2_SEC_ERR("Crypto: Descriptor build failed");
1653                 goto error_out;
1654         }
1655         flc->dhr = 0;
1656         flc->bpv0 = 0x1;
1657         flc->mode_bits = 0x8000;
1658
1659         flc->word1_sdl = (uint8_t)bufsize;
1660         flc->word2_rflc_31_0 = lower_32_bits(
1661                         (size_t)&(((struct dpaa2_sec_qp *)
1662                         dev->data->queue_pairs[0])->rx_vq));
1663         flc->word3_rflc_63_32 = upper_32_bits(
1664                         (size_t)&(((struct dpaa2_sec_qp *)
1665                         dev->data->queue_pairs[0])->rx_vq));
1666         session->ctxt = priv;
1667
1668         for (i = 0; i < bufsize; i++)
1669                 DPAA2_SEC_DEBUG("DESC[%d]:0x%x", i, priv->flc_desc[0].desc[i]);
1670
1671         return 0;
1672
1673 error_out:
1674         rte_free(session->cipher_key.data);
1675         rte_free(priv);
1676         return -1;
1677 }
1678
1679 static int
1680 dpaa2_sec_auth_init(struct rte_cryptodev *dev,
1681                     struct rte_crypto_sym_xform *xform,
1682                     dpaa2_sec_session *session)
1683 {
1684         struct dpaa2_sec_dev_private *dev_priv = dev->data->dev_private;
1685         struct alginfo authdata;
1686         int bufsize, i;
1687         struct ctxt_priv *priv;
1688         struct sec_flow_context *flc;
1689
1690         PMD_INIT_FUNC_TRACE();
1691
1692         /* For SEC AUTH three descriptors are required for various stages */
1693         priv = (struct ctxt_priv *)rte_zmalloc(NULL,
1694                         sizeof(struct ctxt_priv) + 3 *
1695                         sizeof(struct sec_flc_desc),
1696                         RTE_CACHE_LINE_SIZE);
1697         if (priv == NULL) {
1698                 DPAA2_SEC_ERR("No Memory for priv CTXT");
1699                 return -1;
1700         }
1701
1702         priv->fle_pool = dev_priv->fle_pool;
1703         flc = &priv->flc_desc[DESC_INITFINAL].flc;
1704
1705         session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
1706                         RTE_CACHE_LINE_SIZE);
1707         if (session->auth_key.data == NULL) {
1708                 DPAA2_SEC_ERR("Unable to allocate memory for auth key");
1709                 rte_free(priv);
1710                 return -1;
1711         }
1712         session->auth_key.length = xform->auth.key.length;
1713
1714         memcpy(session->auth_key.data, xform->auth.key.data,
1715                xform->auth.key.length);
1716         authdata.key = (size_t)session->auth_key.data;
1717         authdata.keylen = session->auth_key.length;
1718         authdata.key_enc_flags = 0;
1719         authdata.key_type = RTA_DATA_IMM;
1720
1721         session->digest_length = xform->auth.digest_length;
1722
1723         switch (xform->auth.algo) {
1724         case RTE_CRYPTO_AUTH_SHA1_HMAC:
1725                 authdata.algtype = OP_ALG_ALGSEL_SHA1;
1726                 authdata.algmode = OP_ALG_AAI_HMAC;
1727                 session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC;
1728                 break;
1729         case RTE_CRYPTO_AUTH_MD5_HMAC:
1730                 authdata.algtype = OP_ALG_ALGSEL_MD5;
1731                 authdata.algmode = OP_ALG_AAI_HMAC;
1732                 session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC;
1733                 break;
1734         case RTE_CRYPTO_AUTH_SHA256_HMAC:
1735                 authdata.algtype = OP_ALG_ALGSEL_SHA256;
1736                 authdata.algmode = OP_ALG_AAI_HMAC;
1737                 session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC;
1738                 break;
1739         case RTE_CRYPTO_AUTH_SHA384_HMAC:
1740                 authdata.algtype = OP_ALG_ALGSEL_SHA384;
1741                 authdata.algmode = OP_ALG_AAI_HMAC;
1742                 session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC;
1743                 break;
1744         case RTE_CRYPTO_AUTH_SHA512_HMAC:
1745                 authdata.algtype = OP_ALG_ALGSEL_SHA512;
1746                 authdata.algmode = OP_ALG_AAI_HMAC;
1747                 session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC;
1748                 break;
1749         case RTE_CRYPTO_AUTH_SHA224_HMAC:
1750                 authdata.algtype = OP_ALG_ALGSEL_SHA224;
1751                 authdata.algmode = OP_ALG_AAI_HMAC;
1752                 session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC;
1753                 break;
1754         case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
1755         case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
1756         case RTE_CRYPTO_AUTH_NULL:
1757         case RTE_CRYPTO_AUTH_SHA1:
1758         case RTE_CRYPTO_AUTH_SHA256:
1759         case RTE_CRYPTO_AUTH_SHA512:
1760         case RTE_CRYPTO_AUTH_SHA224:
1761         case RTE_CRYPTO_AUTH_SHA384:
1762         case RTE_CRYPTO_AUTH_MD5:
1763         case RTE_CRYPTO_AUTH_AES_GMAC:
1764         case RTE_CRYPTO_AUTH_KASUMI_F9:
1765         case RTE_CRYPTO_AUTH_AES_CMAC:
1766         case RTE_CRYPTO_AUTH_AES_CBC_MAC:
1767         case RTE_CRYPTO_AUTH_ZUC_EIA3:
1768                 DPAA2_SEC_ERR("Crypto: Unsupported auth alg %un",
1769                               xform->auth.algo);
1770                 goto error_out;
1771         default:
1772                 DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
1773                               xform->auth.algo);
1774                 goto error_out;
1775         }
1776         session->dir = (xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
1777                                 DIR_ENC : DIR_DEC;
1778
1779         bufsize = cnstr_shdsc_hmac(priv->flc_desc[DESC_INITFINAL].desc,
1780                                    1, 0, &authdata, !session->dir,
1781                                    session->digest_length);
1782         if (bufsize < 0) {
1783                 DPAA2_SEC_ERR("Crypto: Invalid buffer length");
1784                 goto error_out;
1785         }
1786
1787         flc->word1_sdl = (uint8_t)bufsize;
1788         flc->word2_rflc_31_0 = lower_32_bits(
1789                         (size_t)&(((struct dpaa2_sec_qp *)
1790                         dev->data->queue_pairs[0])->rx_vq));
1791         flc->word3_rflc_63_32 = upper_32_bits(
1792                         (size_t)&(((struct dpaa2_sec_qp *)
1793                         dev->data->queue_pairs[0])->rx_vq));
1794         session->ctxt = priv;
1795         for (i = 0; i < bufsize; i++)
1796                 DPAA2_SEC_DEBUG("DESC[%d]:0x%x",
1797                                 i, priv->flc_desc[DESC_INITFINAL].desc[i]);
1798
1799
1800         return 0;
1801
1802 error_out:
1803         rte_free(session->auth_key.data);
1804         rte_free(priv);
1805         return -1;
1806 }
1807
1808 static int
1809 dpaa2_sec_aead_init(struct rte_cryptodev *dev,
1810                     struct rte_crypto_sym_xform *xform,
1811                     dpaa2_sec_session *session)
1812 {
1813         struct dpaa2_sec_aead_ctxt *ctxt = &session->ext_params.aead_ctxt;
1814         struct dpaa2_sec_dev_private *dev_priv = dev->data->dev_private;
1815         struct alginfo aeaddata;
1816         int bufsize, i;
1817         struct ctxt_priv *priv;
1818         struct sec_flow_context *flc;
1819         struct rte_crypto_aead_xform *aead_xform = &xform->aead;
1820         int err;
1821
1822         PMD_INIT_FUNC_TRACE();
1823
1824         /* Set IV parameters */
1825         session->iv.offset = aead_xform->iv.offset;
1826         session->iv.length = aead_xform->iv.length;
1827         session->ctxt_type = DPAA2_SEC_AEAD;
1828
1829         /* For SEC AEAD only one descriptor is required */
1830         priv = (struct ctxt_priv *)rte_zmalloc(NULL,
1831                         sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
1832                         RTE_CACHE_LINE_SIZE);
1833         if (priv == NULL) {
1834                 DPAA2_SEC_ERR("No Memory for priv CTXT");
1835                 return -1;
1836         }
1837
1838         priv->fle_pool = dev_priv->fle_pool;
1839         flc = &priv->flc_desc[0].flc;
1840
1841         session->aead_key.data = rte_zmalloc(NULL, aead_xform->key.length,
1842                                                RTE_CACHE_LINE_SIZE);
1843         if (session->aead_key.data == NULL && aead_xform->key.length > 0) {
1844                 DPAA2_SEC_ERR("No Memory for aead key");
1845                 rte_free(priv);
1846                 return -1;
1847         }
1848         memcpy(session->aead_key.data, aead_xform->key.data,
1849                aead_xform->key.length);
1850
1851         session->digest_length = aead_xform->digest_length;
1852         session->aead_key.length = aead_xform->key.length;
1853         ctxt->auth_only_len = aead_xform->aad_length;
1854
1855         aeaddata.key = (size_t)session->aead_key.data;
1856         aeaddata.keylen = session->aead_key.length;
1857         aeaddata.key_enc_flags = 0;
1858         aeaddata.key_type = RTA_DATA_IMM;
1859
1860         switch (aead_xform->algo) {
1861         case RTE_CRYPTO_AEAD_AES_GCM:
1862                 aeaddata.algtype = OP_ALG_ALGSEL_AES;
1863                 aeaddata.algmode = OP_ALG_AAI_GCM;
1864                 session->aead_alg = RTE_CRYPTO_AEAD_AES_GCM;
1865                 break;
1866         case RTE_CRYPTO_AEAD_AES_CCM:
1867                 DPAA2_SEC_ERR("Crypto: Unsupported AEAD alg %u",
1868                               aead_xform->algo);
1869                 goto error_out;
1870         default:
1871                 DPAA2_SEC_ERR("Crypto: Undefined AEAD specified %u",
1872                               aead_xform->algo);
1873                 goto error_out;
1874         }
1875         session->dir = (aead_xform->op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
1876                                 DIR_ENC : DIR_DEC;
1877
1878         priv->flc_desc[0].desc[0] = aeaddata.keylen;
1879         err = rta_inline_query(IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN,
1880                                MIN_JOB_DESC_SIZE,
1881                                (unsigned int *)priv->flc_desc[0].desc,
1882                                &priv->flc_desc[0].desc[1], 1);
1883
1884         if (err < 0) {
1885                 DPAA2_SEC_ERR("Crypto: Incorrect key lengths");
1886                 goto error_out;
1887         }
1888         if (priv->flc_desc[0].desc[1] & 1) {
1889                 aeaddata.key_type = RTA_DATA_IMM;
1890         } else {
1891                 aeaddata.key = DPAA2_VADDR_TO_IOVA(aeaddata.key);
1892                 aeaddata.key_type = RTA_DATA_PTR;
1893         }
1894         priv->flc_desc[0].desc[0] = 0;
1895         priv->flc_desc[0].desc[1] = 0;
1896
1897         if (session->dir == DIR_ENC)
1898                 bufsize = cnstr_shdsc_gcm_encap(
1899                                 priv->flc_desc[0].desc, 1, 0,
1900                                 &aeaddata, session->iv.length,
1901                                 session->digest_length);
1902         else
1903                 bufsize = cnstr_shdsc_gcm_decap(
1904                                 priv->flc_desc[0].desc, 1, 0,
1905                                 &aeaddata, session->iv.length,
1906                                 session->digest_length);
1907         if (bufsize < 0) {
1908                 DPAA2_SEC_ERR("Crypto: Invalid buffer length");
1909                 goto error_out;
1910         }
1911
1912         flc->word1_sdl = (uint8_t)bufsize;
1913         flc->word2_rflc_31_0 = lower_32_bits(
1914                         (size_t)&(((struct dpaa2_sec_qp *)
1915                         dev->data->queue_pairs[0])->rx_vq));
1916         flc->word3_rflc_63_32 = upper_32_bits(
1917                         (size_t)&(((struct dpaa2_sec_qp *)
1918                         dev->data->queue_pairs[0])->rx_vq));
1919         session->ctxt = priv;
1920         for (i = 0; i < bufsize; i++)
1921                 DPAA2_SEC_DEBUG("DESC[%d]:0x%x\n",
1922                             i, priv->flc_desc[0].desc[i]);
1923
1924         return 0;
1925
1926 error_out:
1927         rte_free(session->aead_key.data);
1928         rte_free(priv);
1929         return -1;
1930 }
1931
1932
1933 static int
1934 dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
1935                     struct rte_crypto_sym_xform *xform,
1936                     dpaa2_sec_session *session)
1937 {
1938         struct dpaa2_sec_aead_ctxt *ctxt = &session->ext_params.aead_ctxt;
1939         struct dpaa2_sec_dev_private *dev_priv = dev->data->dev_private;
1940         struct alginfo authdata, cipherdata;
1941         int bufsize, i;
1942         struct ctxt_priv *priv;
1943         struct sec_flow_context *flc;
1944         struct rte_crypto_cipher_xform *cipher_xform;
1945         struct rte_crypto_auth_xform *auth_xform;
1946         int err;
1947
1948         PMD_INIT_FUNC_TRACE();
1949
1950         if (session->ext_params.aead_ctxt.auth_cipher_text) {
1951                 cipher_xform = &xform->cipher;
1952                 auth_xform = &xform->next->auth;
1953                 session->ctxt_type =
1954                         (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
1955                         DPAA2_SEC_CIPHER_HASH : DPAA2_SEC_HASH_CIPHER;
1956         } else {
1957                 cipher_xform = &xform->next->cipher;
1958                 auth_xform = &xform->auth;
1959                 session->ctxt_type =
1960                         (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
1961                         DPAA2_SEC_HASH_CIPHER : DPAA2_SEC_CIPHER_HASH;
1962         }
1963
1964         /* Set IV parameters */
1965         session->iv.offset = cipher_xform->iv.offset;
1966         session->iv.length = cipher_xform->iv.length;
1967
1968         /* For SEC AEAD only one descriptor is required */
1969         priv = (struct ctxt_priv *)rte_zmalloc(NULL,
1970                         sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
1971                         RTE_CACHE_LINE_SIZE);
1972         if (priv == NULL) {
1973                 DPAA2_SEC_ERR("No Memory for priv CTXT");
1974                 return -1;
1975         }
1976
1977         priv->fle_pool = dev_priv->fle_pool;
1978         flc = &priv->flc_desc[0].flc;
1979
1980         session->cipher_key.data = rte_zmalloc(NULL, cipher_xform->key.length,
1981                                                RTE_CACHE_LINE_SIZE);
1982         if (session->cipher_key.data == NULL && cipher_xform->key.length > 0) {
1983                 DPAA2_SEC_ERR("No Memory for cipher key");
1984                 rte_free(priv);
1985                 return -1;
1986         }
1987         session->cipher_key.length = cipher_xform->key.length;
1988         session->auth_key.data = rte_zmalloc(NULL, auth_xform->key.length,
1989                                              RTE_CACHE_LINE_SIZE);
1990         if (session->auth_key.data == NULL && auth_xform->key.length > 0) {
1991                 DPAA2_SEC_ERR("No Memory for auth key");
1992                 rte_free(session->cipher_key.data);
1993                 rte_free(priv);
1994                 return -1;
1995         }
1996         session->auth_key.length = auth_xform->key.length;
1997         memcpy(session->cipher_key.data, cipher_xform->key.data,
1998                cipher_xform->key.length);
1999         memcpy(session->auth_key.data, auth_xform->key.data,
2000                auth_xform->key.length);
2001
2002         authdata.key = (size_t)session->auth_key.data;
2003         authdata.keylen = session->auth_key.length;
2004         authdata.key_enc_flags = 0;
2005         authdata.key_type = RTA_DATA_IMM;
2006
2007         session->digest_length = auth_xform->digest_length;
2008
2009         switch (auth_xform->algo) {
2010         case RTE_CRYPTO_AUTH_SHA1_HMAC:
2011                 authdata.algtype = OP_ALG_ALGSEL_SHA1;
2012                 authdata.algmode = OP_ALG_AAI_HMAC;
2013                 session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC;
2014                 break;
2015         case RTE_CRYPTO_AUTH_MD5_HMAC:
2016                 authdata.algtype = OP_ALG_ALGSEL_MD5;
2017                 authdata.algmode = OP_ALG_AAI_HMAC;
2018                 session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC;
2019                 break;
2020         case RTE_CRYPTO_AUTH_SHA224_HMAC:
2021                 authdata.algtype = OP_ALG_ALGSEL_SHA224;
2022                 authdata.algmode = OP_ALG_AAI_HMAC;
2023                 session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC;
2024                 break;
2025         case RTE_CRYPTO_AUTH_SHA256_HMAC:
2026                 authdata.algtype = OP_ALG_ALGSEL_SHA256;
2027                 authdata.algmode = OP_ALG_AAI_HMAC;
2028                 session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC;
2029                 break;
2030         case RTE_CRYPTO_AUTH_SHA384_HMAC:
2031                 authdata.algtype = OP_ALG_ALGSEL_SHA384;
2032                 authdata.algmode = OP_ALG_AAI_HMAC;
2033                 session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC;
2034                 break;
2035         case RTE_CRYPTO_AUTH_SHA512_HMAC:
2036                 authdata.algtype = OP_ALG_ALGSEL_SHA512;
2037                 authdata.algmode = OP_ALG_AAI_HMAC;
2038                 session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC;
2039                 break;
2040         case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
2041         case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
2042         case RTE_CRYPTO_AUTH_NULL:
2043         case RTE_CRYPTO_AUTH_SHA1:
2044         case RTE_CRYPTO_AUTH_SHA256:
2045         case RTE_CRYPTO_AUTH_SHA512:
2046         case RTE_CRYPTO_AUTH_SHA224:
2047         case RTE_CRYPTO_AUTH_SHA384:
2048         case RTE_CRYPTO_AUTH_MD5:
2049         case RTE_CRYPTO_AUTH_AES_GMAC:
2050         case RTE_CRYPTO_AUTH_KASUMI_F9:
2051         case RTE_CRYPTO_AUTH_AES_CMAC:
2052         case RTE_CRYPTO_AUTH_AES_CBC_MAC:
2053         case RTE_CRYPTO_AUTH_ZUC_EIA3:
2054                 DPAA2_SEC_ERR("Crypto: Unsupported auth alg %u",
2055                               auth_xform->algo);
2056                 goto error_out;
2057         default:
2058                 DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
2059                               auth_xform->algo);
2060                 goto error_out;
2061         }
2062         cipherdata.key = (size_t)session->cipher_key.data;
2063         cipherdata.keylen = session->cipher_key.length;
2064         cipherdata.key_enc_flags = 0;
2065         cipherdata.key_type = RTA_DATA_IMM;
2066
2067         switch (cipher_xform->algo) {
2068         case RTE_CRYPTO_CIPHER_AES_CBC:
2069                 cipherdata.algtype = OP_ALG_ALGSEL_AES;
2070                 cipherdata.algmode = OP_ALG_AAI_CBC;
2071                 session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC;
2072                 break;
2073         case RTE_CRYPTO_CIPHER_3DES_CBC:
2074                 cipherdata.algtype = OP_ALG_ALGSEL_3DES;
2075                 cipherdata.algmode = OP_ALG_AAI_CBC;
2076                 session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
2077                 break;
2078         case RTE_CRYPTO_CIPHER_AES_CTR:
2079                 cipherdata.algtype = OP_ALG_ALGSEL_AES;
2080                 cipherdata.algmode = OP_ALG_AAI_CTR;
2081                 session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CTR;
2082                 break;
2083         case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
2084         case RTE_CRYPTO_CIPHER_NULL:
2085         case RTE_CRYPTO_CIPHER_3DES_ECB:
2086         case RTE_CRYPTO_CIPHER_AES_ECB:
2087         case RTE_CRYPTO_CIPHER_KASUMI_F8:
2088                 DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
2089                               cipher_xform->algo);
2090                 goto error_out;
2091         default:
2092                 DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
2093                               cipher_xform->algo);
2094                 goto error_out;
2095         }
2096         session->dir = (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
2097                                 DIR_ENC : DIR_DEC;
2098
2099         priv->flc_desc[0].desc[0] = cipherdata.keylen;
2100         priv->flc_desc[0].desc[1] = authdata.keylen;
2101         err = rta_inline_query(IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN,
2102                                MIN_JOB_DESC_SIZE,
2103                                (unsigned int *)priv->flc_desc[0].desc,
2104                                &priv->flc_desc[0].desc[2], 2);
2105
2106         if (err < 0) {
2107                 DPAA2_SEC_ERR("Crypto: Incorrect key lengths");
2108                 goto error_out;
2109         }
2110         if (priv->flc_desc[0].desc[2] & 1) {
2111                 cipherdata.key_type = RTA_DATA_IMM;
2112         } else {
2113                 cipherdata.key = DPAA2_VADDR_TO_IOVA(cipherdata.key);
2114                 cipherdata.key_type = RTA_DATA_PTR;
2115         }
2116         if (priv->flc_desc[0].desc[2] & (1 << 1)) {
2117                 authdata.key_type = RTA_DATA_IMM;
2118         } else {
2119                 authdata.key = DPAA2_VADDR_TO_IOVA(authdata.key);
2120                 authdata.key_type = RTA_DATA_PTR;
2121         }
2122         priv->flc_desc[0].desc[0] = 0;
2123         priv->flc_desc[0].desc[1] = 0;
2124         priv->flc_desc[0].desc[2] = 0;
2125
2126         if (session->ctxt_type == DPAA2_SEC_CIPHER_HASH) {
2127                 bufsize = cnstr_shdsc_authenc(priv->flc_desc[0].desc, 1,
2128                                               0, &cipherdata, &authdata,
2129                                               session->iv.length,
2130                                               ctxt->auth_only_len,
2131                                               session->digest_length,
2132                                               session->dir);
2133                 if (bufsize < 0) {
2134                         DPAA2_SEC_ERR("Crypto: Invalid buffer length");
2135                         goto error_out;
2136                 }
2137         } else {
2138                 DPAA2_SEC_ERR("Hash before cipher not supported");
2139                 goto error_out;
2140         }
2141
2142         flc->word1_sdl = (uint8_t)bufsize;
2143         flc->word2_rflc_31_0 = lower_32_bits(
2144                         (size_t)&(((struct dpaa2_sec_qp *)
2145                         dev->data->queue_pairs[0])->rx_vq));
2146         flc->word3_rflc_63_32 = upper_32_bits(
2147                         (size_t)&(((struct dpaa2_sec_qp *)
2148                         dev->data->queue_pairs[0])->rx_vq));
2149         session->ctxt = priv;
2150         for (i = 0; i < bufsize; i++)
2151                 DPAA2_SEC_DEBUG("DESC[%d]:0x%x",
2152                             i, priv->flc_desc[0].desc[i]);
2153
2154         return 0;
2155
2156 error_out:
2157         rte_free(session->cipher_key.data);
2158         rte_free(session->auth_key.data);
2159         rte_free(priv);
2160         return -1;
2161 }
2162
2163 static int
2164 dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
2165                             struct rte_crypto_sym_xform *xform, void *sess)
2166 {
2167         dpaa2_sec_session *session = sess;
2168
2169         PMD_INIT_FUNC_TRACE();
2170
2171         if (unlikely(sess == NULL)) {
2172                 DPAA2_SEC_ERR("Invalid session struct");
2173                 return -1;
2174         }
2175
2176         memset(session, 0, sizeof(dpaa2_sec_session));
2177         /* Default IV length = 0 */
2178         session->iv.length = 0;
2179
2180         /* Cipher Only */
2181         if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
2182                 session->ctxt_type = DPAA2_SEC_CIPHER;
2183                 dpaa2_sec_cipher_init(dev, xform, session);
2184
2185         /* Authentication Only */
2186         } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
2187                    xform->next == NULL) {
2188                 session->ctxt_type = DPAA2_SEC_AUTH;
2189                 dpaa2_sec_auth_init(dev, xform, session);
2190
2191         /* Cipher then Authenticate */
2192         } else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
2193                    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
2194                 session->ext_params.aead_ctxt.auth_cipher_text = true;
2195                 dpaa2_sec_aead_chain_init(dev, xform, session);
2196
2197         /* Authenticate then Cipher */
2198         } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
2199                    xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
2200                 session->ext_params.aead_ctxt.auth_cipher_text = false;
2201                 dpaa2_sec_aead_chain_init(dev, xform, session);
2202
2203         /* AEAD operation for AES-GCM kind of Algorithms */
2204         } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD &&
2205                    xform->next == NULL) {
2206                 dpaa2_sec_aead_init(dev, xform, session);
2207
2208         } else {
2209                 DPAA2_SEC_ERR("Invalid crypto type");
2210                 return -EINVAL;
2211         }
2212
2213         return 0;
2214 }
2215
2216 static int
2217 dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform,
2218                         dpaa2_sec_session *session,
2219                         struct alginfo *aeaddata)
2220 {
2221         PMD_INIT_FUNC_TRACE();
2222
2223         session->aead_key.data = rte_zmalloc(NULL, aead_xform->key.length,
2224                                                RTE_CACHE_LINE_SIZE);
2225         if (session->aead_key.data == NULL && aead_xform->key.length > 0) {
2226                 DPAA2_SEC_ERR("No Memory for aead key");
2227                 return -1;
2228         }
2229         memcpy(session->aead_key.data, aead_xform->key.data,
2230                aead_xform->key.length);
2231
2232         session->digest_length = aead_xform->digest_length;
2233         session->aead_key.length = aead_xform->key.length;
2234
2235         aeaddata->key = (size_t)session->aead_key.data;
2236         aeaddata->keylen = session->aead_key.length;
2237         aeaddata->key_enc_flags = 0;
2238         aeaddata->key_type = RTA_DATA_IMM;
2239
2240         switch (aead_xform->algo) {
2241         case RTE_CRYPTO_AEAD_AES_GCM:
2242                 aeaddata->algtype = OP_ALG_ALGSEL_AES;
2243                 aeaddata->algmode = OP_ALG_AAI_GCM;
2244                 session->aead_alg = RTE_CRYPTO_AEAD_AES_GCM;
2245                 break;
2246         case RTE_CRYPTO_AEAD_AES_CCM:
2247                 aeaddata->algtype = OP_ALG_ALGSEL_AES;
2248                 aeaddata->algmode = OP_ALG_AAI_CCM;
2249                 session->aead_alg = RTE_CRYPTO_AEAD_AES_CCM;
2250                 break;
2251         default:
2252                 DPAA2_SEC_ERR("Crypto: Undefined AEAD specified %u",
2253                               aead_xform->algo);
2254                 return -1;
2255         }
2256         session->dir = (aead_xform->op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
2257                                 DIR_ENC : DIR_DEC;
2258
2259         return 0;
2260 }
2261
2262 static int
2263 dpaa2_sec_ipsec_proto_init(struct rte_crypto_cipher_xform *cipher_xform,
2264         struct rte_crypto_auth_xform *auth_xform,
2265         dpaa2_sec_session *session,
2266         struct alginfo *cipherdata,
2267         struct alginfo *authdata)
2268 {
2269         if (cipher_xform) {
2270                 session->cipher_key.data = rte_zmalloc(NULL,
2271                                                        cipher_xform->key.length,
2272                                                        RTE_CACHE_LINE_SIZE);
2273                 if (session->cipher_key.data == NULL &&
2274                                 cipher_xform->key.length > 0) {
2275                         DPAA2_SEC_ERR("No Memory for cipher key");
2276                         return -ENOMEM;
2277                 }
2278
2279                 session->cipher_key.length = cipher_xform->key.length;
2280                 memcpy(session->cipher_key.data, cipher_xform->key.data,
2281                                 cipher_xform->key.length);
2282                 session->cipher_alg = cipher_xform->algo;
2283         } else {
2284                 session->cipher_key.data = NULL;
2285                 session->cipher_key.length = 0;
2286                 session->cipher_alg = RTE_CRYPTO_CIPHER_NULL;
2287         }
2288
2289         if (auth_xform) {
2290                 session->auth_key.data = rte_zmalloc(NULL,
2291                                                 auth_xform->key.length,
2292                                                 RTE_CACHE_LINE_SIZE);
2293                 if (session->auth_key.data == NULL &&
2294                                 auth_xform->key.length > 0) {
2295                         DPAA2_SEC_ERR("No Memory for auth key");
2296                         return -ENOMEM;
2297                 }
2298                 session->auth_key.length = auth_xform->key.length;
2299                 memcpy(session->auth_key.data, auth_xform->key.data,
2300                                 auth_xform->key.length);
2301                 session->auth_alg = auth_xform->algo;
2302         } else {
2303                 session->auth_key.data = NULL;
2304                 session->auth_key.length = 0;
2305                 session->auth_alg = RTE_CRYPTO_AUTH_NULL;
2306         }
2307
2308         authdata->key = (size_t)session->auth_key.data;
2309         authdata->keylen = session->auth_key.length;
2310         authdata->key_enc_flags = 0;
2311         authdata->key_type = RTA_DATA_IMM;
2312         switch (session->auth_alg) {
2313         case RTE_CRYPTO_AUTH_SHA1_HMAC:
2314                 authdata->algtype = OP_PCL_IPSEC_HMAC_SHA1_96;
2315                 authdata->algmode = OP_ALG_AAI_HMAC;
2316                 break;
2317         case RTE_CRYPTO_AUTH_MD5_HMAC:
2318                 authdata->algtype = OP_PCL_IPSEC_HMAC_MD5_96;
2319                 authdata->algmode = OP_ALG_AAI_HMAC;
2320                 break;
2321         case RTE_CRYPTO_AUTH_SHA256_HMAC:
2322                 authdata->algtype = OP_PCL_IPSEC_HMAC_SHA2_256_128;
2323                 authdata->algmode = OP_ALG_AAI_HMAC;
2324                 break;
2325         case RTE_CRYPTO_AUTH_SHA384_HMAC:
2326                 authdata->algtype = OP_PCL_IPSEC_HMAC_SHA2_384_192;
2327                 authdata->algmode = OP_ALG_AAI_HMAC;
2328                 break;
2329         case RTE_CRYPTO_AUTH_SHA512_HMAC:
2330                 authdata->algtype = OP_PCL_IPSEC_HMAC_SHA2_512_256;
2331                 authdata->algmode = OP_ALG_AAI_HMAC;
2332                 break;
2333         case RTE_CRYPTO_AUTH_AES_CMAC:
2334                 authdata->algtype = OP_PCL_IPSEC_AES_CMAC_96;
2335                 break;
2336         case RTE_CRYPTO_AUTH_NULL:
2337                 authdata->algtype = OP_PCL_IPSEC_HMAC_NULL;
2338                 break;
2339         case RTE_CRYPTO_AUTH_SHA224_HMAC:
2340         case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
2341         case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
2342         case RTE_CRYPTO_AUTH_SHA1:
2343         case RTE_CRYPTO_AUTH_SHA256:
2344         case RTE_CRYPTO_AUTH_SHA512:
2345         case RTE_CRYPTO_AUTH_SHA224:
2346         case RTE_CRYPTO_AUTH_SHA384:
2347         case RTE_CRYPTO_AUTH_MD5:
2348         case RTE_CRYPTO_AUTH_AES_GMAC:
2349         case RTE_CRYPTO_AUTH_KASUMI_F9:
2350         case RTE_CRYPTO_AUTH_AES_CBC_MAC:
2351         case RTE_CRYPTO_AUTH_ZUC_EIA3:
2352                 DPAA2_SEC_ERR("Crypto: Unsupported auth alg %u",
2353                               session->auth_alg);
2354                 return -1;
2355         default:
2356                 DPAA2_SEC_ERR("Crypto: Undefined Auth specified %u",
2357                               session->auth_alg);
2358                 return -1;
2359         }
2360         cipherdata->key = (size_t)session->cipher_key.data;
2361         cipherdata->keylen = session->cipher_key.length;
2362         cipherdata->key_enc_flags = 0;
2363         cipherdata->key_type = RTA_DATA_IMM;
2364
2365         switch (session->cipher_alg) {
2366         case RTE_CRYPTO_CIPHER_AES_CBC:
2367                 cipherdata->algtype = OP_PCL_IPSEC_AES_CBC;
2368                 cipherdata->algmode = OP_ALG_AAI_CBC;
2369                 break;
2370         case RTE_CRYPTO_CIPHER_3DES_CBC:
2371                 cipherdata->algtype = OP_PCL_IPSEC_3DES;
2372                 cipherdata->algmode = OP_ALG_AAI_CBC;
2373                 break;
2374         case RTE_CRYPTO_CIPHER_AES_CTR:
2375                 cipherdata->algtype = OP_PCL_IPSEC_AES_CTR;
2376                 cipherdata->algmode = OP_ALG_AAI_CTR;
2377                 break;
2378         case RTE_CRYPTO_CIPHER_NULL:
2379                 cipherdata->algtype = OP_PCL_IPSEC_NULL;
2380                 break;
2381         case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
2382         case RTE_CRYPTO_CIPHER_3DES_ECB:
2383         case RTE_CRYPTO_CIPHER_AES_ECB:
2384         case RTE_CRYPTO_CIPHER_KASUMI_F8:
2385                 DPAA2_SEC_ERR("Crypto: Unsupported Cipher alg %u",
2386                               session->cipher_alg);
2387                 return -1;
2388         default:
2389                 DPAA2_SEC_ERR("Crypto: Undefined Cipher specified %u",
2390                               session->cipher_alg);
2391                 return -1;
2392         }
2393
2394         return 0;
2395 }
2396
2397 #ifdef RTE_LIBRTE_SECURITY_TEST
2398 static uint8_t aes_cbc_iv[] = {
2399         0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
2400         0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f };
2401 #endif
2402
2403 static int
2404 dpaa2_sec_set_ipsec_session(struct rte_cryptodev *dev,
2405                             struct rte_security_session_conf *conf,
2406                             void *sess)
2407 {
2408         struct rte_security_ipsec_xform *ipsec_xform = &conf->ipsec;
2409         struct rte_crypto_cipher_xform *cipher_xform = NULL;
2410         struct rte_crypto_auth_xform *auth_xform = NULL;
2411         struct rte_crypto_aead_xform *aead_xform = NULL;
2412         dpaa2_sec_session *session = (dpaa2_sec_session *)sess;
2413         struct ctxt_priv *priv;
2414         struct ipsec_encap_pdb encap_pdb;
2415         struct ipsec_decap_pdb decap_pdb;
2416         struct alginfo authdata, cipherdata;
2417         int bufsize;
2418         struct sec_flow_context *flc;
2419         struct dpaa2_sec_dev_private *dev_priv = dev->data->dev_private;
2420         int ret = -1;
2421
2422         PMD_INIT_FUNC_TRACE();
2423
2424         priv = (struct ctxt_priv *)rte_zmalloc(NULL,
2425                                 sizeof(struct ctxt_priv) +
2426                                 sizeof(struct sec_flc_desc),
2427                                 RTE_CACHE_LINE_SIZE);
2428
2429         if (priv == NULL) {
2430                 DPAA2_SEC_ERR("No memory for priv CTXT");
2431                 return -ENOMEM;
2432         }
2433
2434         priv->fle_pool = dev_priv->fle_pool;
2435         flc = &priv->flc_desc[0].flc;
2436
2437         memset(session, 0, sizeof(dpaa2_sec_session));
2438
2439         if (conf->crypto_xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
2440                 cipher_xform = &conf->crypto_xform->cipher;
2441                 if (conf->crypto_xform->next)
2442                         auth_xform = &conf->crypto_xform->next->auth;
2443                 ret = dpaa2_sec_ipsec_proto_init(cipher_xform, auth_xform,
2444                                         session, &cipherdata, &authdata);
2445         } else if (conf->crypto_xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
2446                 auth_xform = &conf->crypto_xform->auth;
2447                 if (conf->crypto_xform->next)
2448                         cipher_xform = &conf->crypto_xform->next->cipher;
2449                 ret = dpaa2_sec_ipsec_proto_init(cipher_xform, auth_xform,
2450                                         session, &cipherdata, &authdata);
2451         } else if (conf->crypto_xform->type == RTE_CRYPTO_SYM_XFORM_AEAD) {
2452                 aead_xform = &conf->crypto_xform->aead;
2453                 ret = dpaa2_sec_ipsec_aead_init(aead_xform,
2454                                         session, &cipherdata);
2455         } else {
2456                 DPAA2_SEC_ERR("XFORM not specified");
2457                 ret = -EINVAL;
2458                 goto out;
2459         }
2460         if (ret) {
2461                 DPAA2_SEC_ERR("Failed to process xform");
2462                 goto out;
2463         }
2464
2465         session->ctxt_type = DPAA2_SEC_IPSEC;
2466         if (ipsec_xform->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
2467                 struct ip ip4_hdr;
2468
2469                 flc->dhr = SEC_FLC_DHR_OUTBOUND;
2470                 ip4_hdr.ip_v = IPVERSION;
2471                 ip4_hdr.ip_hl = 5;
2472                 ip4_hdr.ip_len = rte_cpu_to_be_16(sizeof(ip4_hdr));
2473                 ip4_hdr.ip_tos = ipsec_xform->tunnel.ipv4.dscp;
2474                 ip4_hdr.ip_id = 0;
2475                 ip4_hdr.ip_off = 0;
2476                 ip4_hdr.ip_ttl = ipsec_xform->tunnel.ipv4.ttl;
2477                 ip4_hdr.ip_p = IPPROTO_ESP;
2478                 ip4_hdr.ip_sum = 0;
2479                 ip4_hdr.ip_src = ipsec_xform->tunnel.ipv4.src_ip;
2480                 ip4_hdr.ip_dst = ipsec_xform->tunnel.ipv4.dst_ip;
2481                 ip4_hdr.ip_sum = calc_chksum((uint16_t *)(void *)&ip4_hdr,
2482                         sizeof(struct ip));
2483
2484                 /* For Sec Proto only one descriptor is required. */
2485                 memset(&encap_pdb, 0, sizeof(struct ipsec_encap_pdb));
2486                 encap_pdb.options = (IPVERSION << PDBNH_ESP_ENCAP_SHIFT) |
2487                         PDBOPTS_ESP_OIHI_PDB_INL |
2488                         PDBOPTS_ESP_IVSRC |
2489                         PDBHMO_ESP_ENCAP_DTTL |
2490                         PDBHMO_ESP_SNR;
2491                 encap_pdb.spi = ipsec_xform->spi;
2492                 encap_pdb.ip_hdr_len = sizeof(struct ip);
2493
2494                 session->dir = DIR_ENC;
2495                 bufsize = cnstr_shdsc_ipsec_new_encap(priv->flc_desc[0].desc,
2496                                 1, 0, SHR_SERIAL, &encap_pdb,
2497                                 (uint8_t *)&ip4_hdr,
2498                                 &cipherdata, &authdata);
2499         } else if (ipsec_xform->direction ==
2500                         RTE_SECURITY_IPSEC_SA_DIR_INGRESS) {
2501                 flc->dhr = SEC_FLC_DHR_INBOUND;
2502                 memset(&decap_pdb, 0, sizeof(struct ipsec_decap_pdb));
2503                 decap_pdb.options = sizeof(struct ip) << 16;
2504                 session->dir = DIR_DEC;
2505                 bufsize = cnstr_shdsc_ipsec_new_decap(priv->flc_desc[0].desc,
2506                                 1, 0, SHR_SERIAL,
2507                                 &decap_pdb, &cipherdata, &authdata);
2508         } else
2509                 goto out;
2510
2511         if (bufsize < 0) {
2512                 DPAA2_SEC_ERR("Crypto: Invalid buffer length");
2513                 goto out;
2514         }
2515
2516         flc->word1_sdl = (uint8_t)bufsize;
2517
2518         /* Enable the stashing control bit */
2519         DPAA2_SET_FLC_RSC(flc);
2520         flc->word2_rflc_31_0 = lower_32_bits(
2521                         (size_t)&(((struct dpaa2_sec_qp *)
2522                         dev->data->queue_pairs[0])->rx_vq) | 0x14);
2523         flc->word3_rflc_63_32 = upper_32_bits(
2524                         (size_t)&(((struct dpaa2_sec_qp *)
2525                         dev->data->queue_pairs[0])->rx_vq));
2526
2527         /* Set EWS bit i.e. enable write-safe */
2528         DPAA2_SET_FLC_EWS(flc);
2529         /* Set BS = 1 i.e reuse input buffers as output buffers */
2530         DPAA2_SET_FLC_REUSE_BS(flc);
2531         /* Set FF = 10; reuse input buffers if they provide sufficient space */
2532         DPAA2_SET_FLC_REUSE_FF(flc);
2533
2534         session->ctxt = priv;
2535
2536         return 0;
2537 out:
2538         rte_free(session->auth_key.data);
2539         rte_free(session->cipher_key.data);
2540         rte_free(priv);
2541         return ret;
2542 }
2543
2544 static int
2545 dpaa2_sec_security_session_create(void *dev,
2546                                   struct rte_security_session_conf *conf,
2547                                   struct rte_security_session *sess,
2548                                   struct rte_mempool *mempool)
2549 {
2550         void *sess_private_data;
2551         struct rte_cryptodev *cdev = (struct rte_cryptodev *)dev;
2552         int ret;
2553
2554         if (rte_mempool_get(mempool, &sess_private_data)) {
2555                 DPAA2_SEC_ERR("Couldn't get object from session mempool");
2556                 return -ENOMEM;
2557         }
2558
2559         switch (conf->protocol) {
2560         case RTE_SECURITY_PROTOCOL_IPSEC:
2561                 ret = dpaa2_sec_set_ipsec_session(cdev, conf,
2562                                 sess_private_data);
2563                 break;
2564         case RTE_SECURITY_PROTOCOL_MACSEC:
2565                 return -ENOTSUP;
2566         default:
2567                 return -EINVAL;
2568         }
2569         if (ret != 0) {
2570                 DPAA2_SEC_ERR("Failed to configure session parameters");
2571                 /* Return session to mempool */
2572                 rte_mempool_put(mempool, sess_private_data);
2573                 return ret;
2574         }
2575
2576         set_sec_session_private_data(sess, sess_private_data);
2577
2578         return ret;
2579 }
2580
2581 /** Clear the memory of session so it doesn't leave key material behind */
2582 static int
2583 dpaa2_sec_security_session_destroy(void *dev __rte_unused,
2584                 struct rte_security_session *sess)
2585 {
2586         PMD_INIT_FUNC_TRACE();
2587         void *sess_priv = get_sec_session_private_data(sess);
2588
2589         dpaa2_sec_session *s = (dpaa2_sec_session *)sess_priv;
2590
2591         if (sess_priv) {
2592                 struct rte_mempool *sess_mp = rte_mempool_from_obj(sess_priv);
2593
2594                 rte_free(s->ctxt);
2595                 rte_free(s->cipher_key.data);
2596                 rte_free(s->auth_key.data);
2597                 memset(sess, 0, sizeof(dpaa2_sec_session));
2598                 set_sec_session_private_data(sess, NULL);
2599                 rte_mempool_put(sess_mp, sess_priv);
2600         }
2601         return 0;
2602 }
2603
2604 static int
2605 dpaa2_sec_sym_session_configure(struct rte_cryptodev *dev,
2606                 struct rte_crypto_sym_xform *xform,
2607                 struct rte_cryptodev_sym_session *sess,
2608                 struct rte_mempool *mempool)
2609 {
2610         void *sess_private_data;
2611         int ret;
2612
2613         if (rte_mempool_get(mempool, &sess_private_data)) {
2614                 DPAA2_SEC_ERR("Couldn't get object from session mempool");
2615                 return -ENOMEM;
2616         }
2617
2618         ret = dpaa2_sec_set_session_parameters(dev, xform, sess_private_data);
2619         if (ret != 0) {
2620                 DPAA2_SEC_ERR("Failed to configure session parameters");
2621                 /* Return session to mempool */
2622                 rte_mempool_put(mempool, sess_private_data);
2623                 return ret;
2624         }
2625
2626         set_sym_session_private_data(sess, dev->driver_id,
2627                 sess_private_data);
2628
2629         return 0;
2630 }
2631
2632 /** Clear the memory of session so it doesn't leave key material behind */
2633 static void
2634 dpaa2_sec_sym_session_clear(struct rte_cryptodev *dev,
2635                 struct rte_cryptodev_sym_session *sess)
2636 {
2637         PMD_INIT_FUNC_TRACE();
2638         uint8_t index = dev->driver_id;
2639         void *sess_priv = get_sym_session_private_data(sess, index);
2640         dpaa2_sec_session *s = (dpaa2_sec_session *)sess_priv;
2641
2642         if (sess_priv) {
2643                 rte_free(s->ctxt);
2644                 rte_free(s->cipher_key.data);
2645                 rte_free(s->auth_key.data);
2646                 memset(sess, 0, sizeof(dpaa2_sec_session));
2647                 struct rte_mempool *sess_mp = rte_mempool_from_obj(sess_priv);
2648                 set_sym_session_private_data(sess, index, NULL);
2649                 rte_mempool_put(sess_mp, sess_priv);
2650         }
2651 }
2652
2653 static int
2654 dpaa2_sec_dev_configure(struct rte_cryptodev *dev __rte_unused,
2655                         struct rte_cryptodev_config *config __rte_unused)
2656 {
2657         PMD_INIT_FUNC_TRACE();
2658
2659         return 0;
2660 }
2661
2662 static int
2663 dpaa2_sec_dev_start(struct rte_cryptodev *dev)
2664 {
2665         struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
2666         struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
2667         struct dpseci_attr attr;
2668         struct dpaa2_queue *dpaa2_q;
2669         struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
2670                                         dev->data->queue_pairs;
2671         struct dpseci_rx_queue_attr rx_attr;
2672         struct dpseci_tx_queue_attr tx_attr;
2673         int ret, i;
2674
2675         PMD_INIT_FUNC_TRACE();
2676
2677         memset(&attr, 0, sizeof(struct dpseci_attr));
2678
2679         ret = dpseci_enable(dpseci, CMD_PRI_LOW, priv->token);
2680         if (ret) {
2681                 DPAA2_SEC_ERR("DPSECI with HW_ID = %d ENABLE FAILED",
2682                               priv->hw_id);
2683                 goto get_attr_failure;
2684         }
2685         ret = dpseci_get_attributes(dpseci, CMD_PRI_LOW, priv->token, &attr);
2686         if (ret) {
2687                 DPAA2_SEC_ERR("DPSEC ATTRIBUTE READ FAILED, disabling DPSEC");
2688                 goto get_attr_failure;
2689         }
2690         for (i = 0; i < attr.num_rx_queues && qp[i]; i++) {
2691                 dpaa2_q = &qp[i]->rx_vq;
2692                 dpseci_get_rx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
2693                                     &rx_attr);
2694                 dpaa2_q->fqid = rx_attr.fqid;
2695                 DPAA2_SEC_DEBUG("rx_fqid: %d", dpaa2_q->fqid);
2696         }
2697         for (i = 0; i < attr.num_tx_queues && qp[i]; i++) {
2698                 dpaa2_q = &qp[i]->tx_vq;
2699                 dpseci_get_tx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
2700                                     &tx_attr);
2701                 dpaa2_q->fqid = tx_attr.fqid;
2702                 DPAA2_SEC_DEBUG("tx_fqid: %d", dpaa2_q->fqid);
2703         }
2704
2705         return 0;
2706 get_attr_failure:
2707         dpseci_disable(dpseci, CMD_PRI_LOW, priv->token);
2708         return -1;
2709 }
2710
2711 static void
2712 dpaa2_sec_dev_stop(struct rte_cryptodev *dev)
2713 {
2714         struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
2715         struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
2716         int ret;
2717
2718         PMD_INIT_FUNC_TRACE();
2719
2720         ret = dpseci_disable(dpseci, CMD_PRI_LOW, priv->token);
2721         if (ret) {
2722                 DPAA2_SEC_ERR("Failure in disabling dpseci %d device",
2723                              priv->hw_id);
2724                 return;
2725         }
2726
2727         ret = dpseci_reset(dpseci, CMD_PRI_LOW, priv->token);
2728         if (ret < 0) {
2729                 DPAA2_SEC_ERR("SEC Device cannot be reset:Error = %0x", ret);
2730                 return;
2731         }
2732 }
2733
2734 static int
2735 dpaa2_sec_dev_close(struct rte_cryptodev *dev)
2736 {
2737         struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
2738         struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
2739         int ret;
2740
2741         PMD_INIT_FUNC_TRACE();
2742
2743         /* Function is reverse of dpaa2_sec_dev_init.
2744          * It does the following:
2745          * 1. Detach a DPSECI from attached resources i.e. buffer pools, dpbp_id
2746          * 2. Close the DPSECI device
2747          * 3. Free the allocated resources.
2748          */
2749
2750         /*Close the device at underlying layer*/
2751         ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token);
2752         if (ret) {
2753                 DPAA2_SEC_ERR("Failure closing dpseci device: err(%d)", ret);
2754                 return -1;
2755         }
2756
2757         /*Free the allocated memory for ethernet private data and dpseci*/
2758         priv->hw = NULL;
2759         rte_free(dpseci);
2760
2761         return 0;
2762 }
2763
2764 static void
2765 dpaa2_sec_dev_infos_get(struct rte_cryptodev *dev,
2766                         struct rte_cryptodev_info *info)
2767 {
2768         struct dpaa2_sec_dev_private *internals = dev->data->dev_private;
2769
2770         PMD_INIT_FUNC_TRACE();
2771         if (info != NULL) {
2772                 info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
2773                 info->feature_flags = dev->feature_flags;
2774                 info->capabilities = dpaa2_sec_capabilities;
2775                 /* No limit of number of sessions */
2776                 info->sym.max_nb_sessions = 0;
2777                 info->driver_id = cryptodev_driver_id;
2778         }
2779 }
2780
2781 static
2782 void dpaa2_sec_stats_get(struct rte_cryptodev *dev,
2783                          struct rte_cryptodev_stats *stats)
2784 {
2785         struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
2786         struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
2787         struct dpseci_sec_counters counters = {0};
2788         struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
2789                                         dev->data->queue_pairs;
2790         int ret, i;
2791
2792         PMD_INIT_FUNC_TRACE();
2793         if (stats == NULL) {
2794                 DPAA2_SEC_ERR("Invalid stats ptr NULL");
2795                 return;
2796         }
2797         for (i = 0; i < dev->data->nb_queue_pairs; i++) {
2798                 if (qp[i] == NULL) {
2799                         DPAA2_SEC_DEBUG("Uninitialised queue pair");
2800                         continue;
2801                 }
2802
2803                 stats->enqueued_count += qp[i]->tx_vq.tx_pkts;
2804                 stats->dequeued_count += qp[i]->rx_vq.rx_pkts;
2805                 stats->enqueue_err_count += qp[i]->tx_vq.err_pkts;
2806                 stats->dequeue_err_count += qp[i]->rx_vq.err_pkts;
2807         }
2808
2809         ret = dpseci_get_sec_counters(dpseci, CMD_PRI_LOW, priv->token,
2810                                       &counters);
2811         if (ret) {
2812                 DPAA2_SEC_ERR("SEC counters failed");
2813         } else {
2814                 DPAA2_SEC_INFO("dpseci hardware stats:"
2815                             "\n\tNum of Requests Dequeued = %" PRIu64
2816                             "\n\tNum of Outbound Encrypt Requests = %" PRIu64
2817                             "\n\tNum of Inbound Decrypt Requests = %" PRIu64
2818                             "\n\tNum of Outbound Bytes Encrypted = %" PRIu64
2819                             "\n\tNum of Outbound Bytes Protected = %" PRIu64
2820                             "\n\tNum of Inbound Bytes Decrypted = %" PRIu64
2821                             "\n\tNum of Inbound Bytes Validated = %" PRIu64,
2822                             counters.dequeued_requests,
2823                             counters.ob_enc_requests,
2824                             counters.ib_dec_requests,
2825                             counters.ob_enc_bytes,
2826                             counters.ob_prot_bytes,
2827                             counters.ib_dec_bytes,
2828                             counters.ib_valid_bytes);
2829         }
2830 }
2831
2832 static
2833 void dpaa2_sec_stats_reset(struct rte_cryptodev *dev)
2834 {
2835         int i;
2836         struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
2837                                    (dev->data->queue_pairs);
2838
2839         PMD_INIT_FUNC_TRACE();
2840
2841         for (i = 0; i < dev->data->nb_queue_pairs; i++) {
2842                 if (qp[i] == NULL) {
2843                         DPAA2_SEC_DEBUG("Uninitialised queue pair");
2844                         continue;
2845                 }
2846                 qp[i]->tx_vq.rx_pkts = 0;
2847                 qp[i]->tx_vq.tx_pkts = 0;
2848                 qp[i]->tx_vq.err_pkts = 0;
2849                 qp[i]->rx_vq.rx_pkts = 0;
2850                 qp[i]->rx_vq.tx_pkts = 0;
2851                 qp[i]->rx_vq.err_pkts = 0;
2852         }
2853 }
2854
2855 static struct rte_cryptodev_ops crypto_ops = {
2856         .dev_configure        = dpaa2_sec_dev_configure,
2857         .dev_start            = dpaa2_sec_dev_start,
2858         .dev_stop             = dpaa2_sec_dev_stop,
2859         .dev_close            = dpaa2_sec_dev_close,
2860         .dev_infos_get        = dpaa2_sec_dev_infos_get,
2861         .stats_get            = dpaa2_sec_stats_get,
2862         .stats_reset          = dpaa2_sec_stats_reset,
2863         .queue_pair_setup     = dpaa2_sec_queue_pair_setup,
2864         .queue_pair_release   = dpaa2_sec_queue_pair_release,
2865         .queue_pair_count     = dpaa2_sec_queue_pair_count,
2866         .sym_session_get_size     = dpaa2_sec_sym_session_get_size,
2867         .sym_session_configure    = dpaa2_sec_sym_session_configure,
2868         .sym_session_clear        = dpaa2_sec_sym_session_clear,
2869 };
2870
2871 static const struct rte_security_capability *
2872 dpaa2_sec_capabilities_get(void *device __rte_unused)
2873 {
2874         return dpaa2_sec_security_cap;
2875 }
2876
2877 struct rte_security_ops dpaa2_sec_security_ops = {
2878         .session_create = dpaa2_sec_security_session_create,
2879         .session_update = NULL,
2880         .session_stats_get = NULL,
2881         .session_destroy = dpaa2_sec_security_session_destroy,
2882         .set_pkt_metadata = NULL,
2883         .capabilities_get = dpaa2_sec_capabilities_get
2884 };
2885
2886 static int
2887 dpaa2_sec_uninit(const struct rte_cryptodev *dev)
2888 {
2889         struct dpaa2_sec_dev_private *internals = dev->data->dev_private;
2890
2891         rte_free(dev->security_ctx);
2892
2893         rte_mempool_free(internals->fle_pool);
2894
2895         DPAA2_SEC_INFO("Closing DPAA2_SEC device %s on numa socket %u",
2896                        dev->data->name, rte_socket_id());
2897
2898         return 0;
2899 }
2900
2901 static int
2902 dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
2903 {
2904         struct dpaa2_sec_dev_private *internals;
2905         struct rte_device *dev = cryptodev->device;
2906         struct rte_dpaa2_device *dpaa2_dev;
2907         struct rte_security_ctx *security_instance;
2908         struct fsl_mc_io *dpseci;
2909         uint16_t token;
2910         struct dpseci_attr attr;
2911         int retcode, hw_id;
2912         char str[20];
2913
2914         PMD_INIT_FUNC_TRACE();
2915         dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device);
2916         if (dpaa2_dev == NULL) {
2917                 DPAA2_SEC_ERR("DPAA2 SEC device not found");
2918                 return -1;
2919         }
2920         hw_id = dpaa2_dev->object_id;
2921
2922         cryptodev->driver_id = cryptodev_driver_id;
2923         cryptodev->dev_ops = &crypto_ops;
2924
2925         cryptodev->enqueue_burst = dpaa2_sec_enqueue_burst;
2926         cryptodev->dequeue_burst = dpaa2_sec_dequeue_burst;
2927         cryptodev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
2928                         RTE_CRYPTODEV_FF_HW_ACCELERATED |
2929                         RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
2930                         RTE_CRYPTODEV_FF_SECURITY |
2931                         RTE_CRYPTODEV_FF_IN_PLACE_SGL |
2932                         RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT |
2933                         RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
2934                         RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT |
2935                         RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT;
2936
2937         internals = cryptodev->data->dev_private;
2938
2939         /*
2940          * For secondary processes, we don't initialise any further as primary
2941          * has already done this work. Only check we don't need a different
2942          * RX function
2943          */
2944         if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
2945                 DPAA2_SEC_DEBUG("Device already init by primary process");
2946                 return 0;
2947         }
2948
2949         /* Initialize security_ctx only for primary process*/
2950         security_instance = rte_malloc("rte_security_instances_ops",
2951                                 sizeof(struct rte_security_ctx), 0);
2952         if (security_instance == NULL)
2953                 return -ENOMEM;
2954         security_instance->device = (void *)cryptodev;
2955         security_instance->ops = &dpaa2_sec_security_ops;
2956         security_instance->sess_cnt = 0;
2957         cryptodev->security_ctx = security_instance;
2958
2959         /*Open the rte device via MC and save the handle for further use*/
2960         dpseci = (struct fsl_mc_io *)rte_calloc(NULL, 1,
2961                                 sizeof(struct fsl_mc_io), 0);
2962         if (!dpseci) {
2963                 DPAA2_SEC_ERR(
2964                         "Error in allocating the memory for dpsec object");
2965                 return -1;
2966         }
2967         dpseci->regs = rte_mcp_ptr_list[0];
2968
2969         retcode = dpseci_open(dpseci, CMD_PRI_LOW, hw_id, &token);
2970         if (retcode != 0) {
2971                 DPAA2_SEC_ERR("Cannot open the dpsec device: Error = %x",
2972                               retcode);
2973                 goto init_error;
2974         }
2975         retcode = dpseci_get_attributes(dpseci, CMD_PRI_LOW, token, &attr);
2976         if (retcode != 0) {
2977                 DPAA2_SEC_ERR(
2978                              "Cannot get dpsec device attributed: Error = %x",
2979                              retcode);
2980                 goto init_error;
2981         }
2982         sprintf(cryptodev->data->name, "dpsec-%u", hw_id);
2983
2984         internals->max_nb_queue_pairs = attr.num_tx_queues;
2985         cryptodev->data->nb_queue_pairs = internals->max_nb_queue_pairs;
2986         internals->hw = dpseci;
2987         internals->token = token;
2988
2989         sprintf(str, "fle_pool_%d", cryptodev->data->dev_id);
2990         internals->fle_pool = rte_mempool_create((const char *)str,
2991                         FLE_POOL_NUM_BUFS,
2992                         FLE_POOL_BUF_SIZE,
2993                         FLE_POOL_CACHE_SIZE, 0,
2994                         NULL, NULL, NULL, NULL,
2995                         SOCKET_ID_ANY, 0);
2996         if (!internals->fle_pool) {
2997                 DPAA2_SEC_ERR("Mempool (%s) creation failed", str);
2998                 goto init_error;
2999         }
3000
3001         DPAA2_SEC_INFO("driver %s: created", cryptodev->data->name);
3002         return 0;
3003
3004 init_error:
3005         DPAA2_SEC_ERR("driver %s: create failed", cryptodev->data->name);
3006
3007         /* dpaa2_sec_uninit(crypto_dev_name); */
3008         return -EFAULT;
3009 }
3010
3011 static int
3012 cryptodev_dpaa2_sec_probe(struct rte_dpaa2_driver *dpaa2_drv __rte_unused,
3013                           struct rte_dpaa2_device *dpaa2_dev)
3014 {
3015         struct rte_cryptodev *cryptodev;
3016         char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
3017
3018         int retval;
3019
3020         sprintf(cryptodev_name, "dpsec-%d", dpaa2_dev->object_id);
3021
3022         cryptodev = rte_cryptodev_pmd_allocate(cryptodev_name, rte_socket_id());
3023         if (cryptodev == NULL)
3024                 return -ENOMEM;
3025
3026         if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
3027                 cryptodev->data->dev_private = rte_zmalloc_socket(
3028                                         "cryptodev private structure",
3029                                         sizeof(struct dpaa2_sec_dev_private),
3030                                         RTE_CACHE_LINE_SIZE,
3031                                         rte_socket_id());
3032
3033                 if (cryptodev->data->dev_private == NULL)
3034                         rte_panic("Cannot allocate memzone for private "
3035                                   "device data");
3036         }
3037
3038         dpaa2_dev->cryptodev = cryptodev;
3039         cryptodev->device = &dpaa2_dev->device;
3040
3041         /* init user callbacks */
3042         TAILQ_INIT(&(cryptodev->link_intr_cbs));
3043
3044         /* Invoke PMD device initialization function */
3045         retval = dpaa2_sec_dev_init(cryptodev);
3046         if (retval == 0)
3047                 return 0;
3048
3049         if (rte_eal_process_type() == RTE_PROC_PRIMARY)
3050                 rte_free(cryptodev->data->dev_private);
3051
3052         cryptodev->attached = RTE_CRYPTODEV_DETACHED;
3053
3054         return -ENXIO;
3055 }
3056
3057 static int
3058 cryptodev_dpaa2_sec_remove(struct rte_dpaa2_device *dpaa2_dev)
3059 {
3060         struct rte_cryptodev *cryptodev;
3061         int ret;
3062
3063         cryptodev = dpaa2_dev->cryptodev;
3064         if (cryptodev == NULL)
3065                 return -ENODEV;
3066
3067         ret = dpaa2_sec_uninit(cryptodev);
3068         if (ret)
3069                 return ret;
3070
3071         return rte_cryptodev_pmd_destroy(cryptodev);
3072 }
3073
3074 static struct rte_dpaa2_driver rte_dpaa2_sec_driver = {
3075         .drv_flags = RTE_DPAA2_DRV_IOVA_AS_VA,
3076         .drv_type = DPAA2_CRYPTO,
3077         .driver = {
3078                 .name = "DPAA2 SEC PMD"
3079         },
3080         .probe = cryptodev_dpaa2_sec_probe,
3081         .remove = cryptodev_dpaa2_sec_remove,
3082 };
3083
3084 static struct cryptodev_driver dpaa2_sec_crypto_drv;
3085
3086 RTE_PMD_REGISTER_DPAA2(CRYPTODEV_NAME_DPAA2_SEC_PMD, rte_dpaa2_sec_driver);
3087 RTE_PMD_REGISTER_CRYPTO_DRIVER(dpaa2_sec_crypto_drv,
3088                 rte_dpaa2_sec_driver.driver, cryptodev_driver_id);
3089
3090 RTE_INIT(dpaa2_sec_init_log)
3091 {
3092         /* Bus level logs */
3093         dpaa2_logtype_sec = rte_log_register("pmd.crypto.dpaa2");
3094         if (dpaa2_logtype_sec >= 0)
3095                 rte_log_set_level(dpaa2_logtype_sec, RTE_LOG_NOTICE);
3096 }