drivers/crypto/mvsam/rte_mrvl_pmd.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2017 Marvell International Ltd.
   3  * Copyright(c) 2017 Semihalf.
   4  * All rights reserved.
   5  */
   6
   7 #include <rte_common.h>
   8 #include <rte_hexdump.h>
   9 #include <rte_cryptodev.h>
  10 #include <rte_cryptodev_pmd.h>
  11 #include <rte_bus_vdev.h>
  12 #include <rte_malloc.h>
  13 #include <rte_cpuflags.h>
  14 #include <rte_kvargs.h>
  15 #include <rte_mvep_common.h>
  16
  17 #include "rte_mrvl_pmd_private.h"
  18
  19 #define MRVL_PMD_MAX_NB_SESS_ARG                ("max_nb_sessions")
  20 #define MRVL_PMD_DEFAULT_MAX_NB_SESSIONS        2048
  21
  22 static uint8_t cryptodev_driver_id;
  23
  24 struct mrvl_pmd_init_params {
  25         struct rte_cryptodev_pmd_init_params common;
  26         uint32_t max_nb_sessions;
  27 };
  28
  29 const char *mrvl_pmd_valid_params[] = {
  30         RTE_CRYPTODEV_PMD_NAME_ARG,
  31         RTE_CRYPTODEV_PMD_MAX_NB_QP_ARG,
  32         RTE_CRYPTODEV_PMD_SOCKET_ID_ARG,
  33         MRVL_PMD_MAX_NB_SESS_ARG
  34 };
  35
  36 /**
  37  * Flag if particular crypto algorithm is supported by PMD/MUSDK.
  38  *
  39  * The idea is to have Not Supported value as default (0).
  40  * This way we need only to define proper map sizes,
  41  * non-initialized entries will be by default not supported.
  42  */
  43 enum algo_supported {
  44         ALGO_NOT_SUPPORTED = 0,
  45         ALGO_SUPPORTED = 1,
  46 };
  47
  48 /** Map elements for cipher mapping.*/
  49 struct cipher_params_mapping {
  50         enum algo_supported  supported;   /**< On/Off switch */
  51         enum sam_cipher_alg  cipher_alg;  /**< Cipher algorithm */
  52         enum sam_cipher_mode cipher_mode; /**< Cipher mode */
  53         unsigned int max_key_len;         /**< Maximum key length (in bytes)*/
  54 }
  55 /* We want to squeeze in multiple maps into the cache line. */
  56 __rte_aligned(32);
  57
  58 /** Map elements for auth mapping.*/
  59 struct auth_params_mapping {
  60         enum algo_supported supported;  /**< On/off switch */
  61         enum sam_auth_alg   auth_alg;   /**< Auth algorithm */
  62 }
  63 /* We want to squeeze in multiple maps into the cache line. */
  64 __rte_aligned(32);
  65
  66 /**
  67  * Map of supported cipher algorithms.
  68  */
  69 static const
  70 struct cipher_params_mapping cipher_map[RTE_CRYPTO_CIPHER_LIST_END] = {
  71         [RTE_CRYPTO_CIPHER_NULL] = {
  72                 .supported = ALGO_SUPPORTED,
  73                 .cipher_alg = SAM_CIPHER_NONE },
  74         [RTE_CRYPTO_CIPHER_3DES_CBC] = {
  75                 .supported = ALGO_SUPPORTED,
  76                 .cipher_alg = SAM_CIPHER_3DES,
  77                 .cipher_mode = SAM_CIPHER_CBC,
  78                 .max_key_len = BITS2BYTES(192) },
  79         [RTE_CRYPTO_CIPHER_3DES_CTR] = {
  80                 .supported = ALGO_SUPPORTED,
  81                 .cipher_alg = SAM_CIPHER_3DES,
  82                 .cipher_mode = SAM_CIPHER_CTR,
  83                 .max_key_len = BITS2BYTES(192) },
  84         [RTE_CRYPTO_CIPHER_3DES_ECB] = {
  85                 .supported = ALGO_SUPPORTED,
  86                 .cipher_alg = SAM_CIPHER_3DES,
  87                 .cipher_mode = SAM_CIPHER_ECB,
  88                 .max_key_len = BITS2BYTES(192) },
  89         [RTE_CRYPTO_CIPHER_AES_CBC] = {
  90                 .supported = ALGO_SUPPORTED,
  91                 .cipher_alg = SAM_CIPHER_AES,
  92                 .cipher_mode = SAM_CIPHER_CBC,
  93                 .max_key_len = BITS2BYTES(256) },
  94         [RTE_CRYPTO_CIPHER_AES_CTR] = {
  95                 .supported = ALGO_SUPPORTED,
  96                 .cipher_alg = SAM_CIPHER_AES,
  97                 .cipher_mode = SAM_CIPHER_CTR,
  98                 .max_key_len = BITS2BYTES(256) },
  99         [RTE_CRYPTO_CIPHER_AES_ECB] = {
 100                 .supported = ALGO_SUPPORTED,
 101                 .cipher_alg = SAM_CIPHER_AES,
 102                 .cipher_mode = SAM_CIPHER_ECB,
 103                 .max_key_len = BITS2BYTES(256) },
 104 };
 105
 106 /**
 107  * Map of supported auth algorithms.
 108  */
 109 static const
 110 struct auth_params_mapping auth_map[RTE_CRYPTO_AUTH_LIST_END] = {
 111         [RTE_CRYPTO_AUTH_NULL] = {
 112                 .supported = ALGO_SUPPORTED,
 113                 .auth_alg = SAM_AUTH_NONE },
 114         [RTE_CRYPTO_AUTH_MD5_HMAC] = {
 115                 .supported = ALGO_SUPPORTED,
 116                 .auth_alg = SAM_AUTH_HMAC_MD5 },
 117         [RTE_CRYPTO_AUTH_MD5] = {
 118                 .supported = ALGO_SUPPORTED,
 119                 .auth_alg = SAM_AUTH_HASH_MD5 },
 120         [RTE_CRYPTO_AUTH_SHA1_HMAC] = {
 121                 .supported = ALGO_SUPPORTED,
 122                 .auth_alg = SAM_AUTH_HMAC_SHA1 },
 123         [RTE_CRYPTO_AUTH_SHA1] = {
 124                 .supported = ALGO_SUPPORTED,
 125                 .auth_alg = SAM_AUTH_HASH_SHA1 },
 126         [RTE_CRYPTO_AUTH_SHA224_HMAC] = {
 127                 .supported = ALGO_SUPPORTED,
 128                 .auth_alg = SAM_AUTH_HMAC_SHA2_224 },
 129         [RTE_CRYPTO_AUTH_SHA224] = {
 130                 .supported = ALGO_SUPPORTED,
 131                 .auth_alg = SAM_AUTH_HASH_SHA2_224 },
 132         [RTE_CRYPTO_AUTH_SHA256_HMAC] = {
 133                 .supported = ALGO_SUPPORTED,
 134                 .auth_alg = SAM_AUTH_HMAC_SHA2_256 },
 135         [RTE_CRYPTO_AUTH_SHA256] = {
 136                 .supported = ALGO_SUPPORTED,
 137                 .auth_alg = SAM_AUTH_HASH_SHA2_256 },
 138         [RTE_CRYPTO_AUTH_SHA384_HMAC] = {
 139                 .supported = ALGO_SUPPORTED,
 140                 .auth_alg = SAM_AUTH_HMAC_SHA2_384 },
 141         [RTE_CRYPTO_AUTH_SHA384] = {
 142                 .supported = ALGO_SUPPORTED,
 143                 .auth_alg = SAM_AUTH_HASH_SHA2_384 },
 144         [RTE_CRYPTO_AUTH_SHA512_HMAC] = {
 145                 .supported = ALGO_SUPPORTED,
 146                 .auth_alg = SAM_AUTH_HMAC_SHA2_512 },
 147         [RTE_CRYPTO_AUTH_SHA512] = {
 148                 .supported = ALGO_SUPPORTED,
 149                 .auth_alg = SAM_AUTH_HASH_SHA2_512 },
 150         [RTE_CRYPTO_AUTH_AES_GMAC] = {
 151                 .supported = ALGO_SUPPORTED,
 152                 .auth_alg = SAM_AUTH_AES_GMAC },
 153 };
 154
 155 /**
 156  * Map of supported aead algorithms.
 157  */
 158 static const
 159 struct cipher_params_mapping aead_map[RTE_CRYPTO_AEAD_LIST_END] = {
 160         [RTE_CRYPTO_AEAD_AES_GCM] = {
 161                 .supported = ALGO_SUPPORTED,
 162                 .cipher_alg = SAM_CIPHER_AES,
 163                 .cipher_mode = SAM_CIPHER_GCM,
 164                 .max_key_len = BITS2BYTES(256) },
 165 };
 166
 167 /*
 168  *-----------------------------------------------------------------------------
 169  * Forward declarations.
 170  *-----------------------------------------------------------------------------
 171  */
 172 static int cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev);
 173
 174 /*
 175  *-----------------------------------------------------------------------------
 176  * Session Preparation.
 177  *-----------------------------------------------------------------------------
 178  */
 179
 180 /**
 181  * Get xform chain order.
 182  *
 183  * @param xform Pointer to configuration structure chain for crypto operations.
 184  * @returns Order of crypto operations.
 185  */
 186 static enum mrvl_crypto_chain_order
 187 mrvl_crypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
 188 {
 189         /* Currently, Marvell supports max 2 operations in chain */
 190         if (xform->next != NULL && xform->next->next != NULL)
 191                 return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
 192
 193         if (xform->next != NULL) {
 194                 if ((xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
 195                         (xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER))
 196                         return MRVL_CRYPTO_CHAIN_AUTH_CIPHER;
 197
 198                 if ((xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) &&
 199                         (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH))
 200                         return MRVL_CRYPTO_CHAIN_CIPHER_AUTH;
 201         } else {
 202                 if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH)
 203                         return MRVL_CRYPTO_CHAIN_AUTH_ONLY;
 204
 205                 if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
 206                         return MRVL_CRYPTO_CHAIN_CIPHER_ONLY;
 207
 208                 if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD)
 209                         return MRVL_CRYPTO_CHAIN_COMBINED;
 210         }
 211         return MRVL_CRYPTO_CHAIN_NOT_SUPPORTED;
 212 }
 213
 214 /**
 215  * Set session parameters for cipher part.
 216  *
 217  * @param sess Crypto session pointer.
 218  * @param cipher_xform Pointer to configuration structure for cipher operations.
 219  * @returns 0 in case of success, negative value otherwise.
 220  */
 221 static int
 222 mrvl_crypto_set_cipher_session_parameters(struct mrvl_crypto_session *sess,
 223                 const struct rte_crypto_sym_xform *cipher_xform)
 224 {
 225         uint8_t *cipher_key;
 226
 227         /* Make sure we've got proper struct */
 228         if (cipher_xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
 229                 MRVL_LOG(ERR, "Wrong xform struct provided!");
 230                 return -EINVAL;
 231         }
 232
 233         /* See if map data is present and valid */
 234         if ((cipher_xform->cipher.algo > RTE_DIM(cipher_map)) ||
 235                 (cipher_map[cipher_xform->cipher.algo].supported
 236                         != ALGO_SUPPORTED)) {
 237                 MRVL_LOG(ERR, "Cipher algorithm not supported!");
 238                 return -EINVAL;
 239         }
 240
 241         sess->cipher_iv_offset = cipher_xform->cipher.iv.offset;
 242
 243         sess->sam_sess_params.dir =
 244                 (cipher_xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
 245                 SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
 246         sess->sam_sess_params.cipher_alg =
 247                 cipher_map[cipher_xform->cipher.algo].cipher_alg;
 248         sess->sam_sess_params.cipher_mode =
 249                 cipher_map[cipher_xform->cipher.algo].cipher_mode;
 250
 251         /* Assume IV will be passed together with data. */
 252         sess->sam_sess_params.cipher_iv = NULL;
 253
 254         /* Get max key length. */
 255         if (cipher_xform->cipher.key.length >
 256                 cipher_map[cipher_xform->cipher.algo].max_key_len) {
 257                 MRVL_LOG(ERR, "Wrong key length!");
 258                 return -EINVAL;
 259         }
 260
 261         cipher_key = malloc(cipher_xform->cipher.key.length);
 262         if (cipher_key == NULL) {
 263                 MRVL_LOG(ERR, "Insufficient memory!");
 264                 return -ENOMEM;
 265         }
 266
 267         memcpy(cipher_key, cipher_xform->cipher.key.data,
 268                         cipher_xform->cipher.key.length);
 269
 270         sess->sam_sess_params.cipher_key_len = cipher_xform->cipher.key.length;
 271         sess->sam_sess_params.cipher_key = cipher_key;
 272
 273         return 0;
 274 }
 275
 276 /**
 277  * Set session parameters for authentication part.
 278  *
 279  * @param sess Crypto session pointer.
 280  * @param auth_xform Pointer to configuration structure for auth operations.
 281  * @returns 0 in case of success, negative value otherwise.
 282  */
 283 static int
 284 mrvl_crypto_set_auth_session_parameters(struct mrvl_crypto_session *sess,
 285                 const struct rte_crypto_sym_xform *auth_xform)
 286 {
 287         uint8_t *auth_key = NULL;
 288
 289         /* Make sure we've got proper struct */
 290         if (auth_xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
 291                 MRVL_LOG(ERR, "Wrong xform struct provided!");
 292                 return -EINVAL;
 293         }
 294
 295         /* See if map data is present and valid */
 296         if ((auth_xform->auth.algo > RTE_DIM(auth_map)) ||
 297                 (auth_map[auth_xform->auth.algo].supported != ALGO_SUPPORTED)) {
 298                 MRVL_LOG(ERR, "Auth algorithm not supported!");
 299                 return -EINVAL;
 300         }
 301
 302         sess->sam_sess_params.dir =
 303                 (auth_xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
 304                 SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
 305         sess->sam_sess_params.auth_alg =
 306                 auth_map[auth_xform->auth.algo].auth_alg;
 307         sess->sam_sess_params.u.basic.auth_icv_len =
 308                 auth_xform->auth.digest_length;
 309
 310         if (auth_xform->auth.key.length > 0) {
 311                 auth_key = malloc(auth_xform->auth.key.length);
 312                 if (auth_key == NULL) {
 313                         MRVL_LOG(ERR, "Not enough memory!");
 314                         return -EINVAL;
 315                 }
 316
 317                 memcpy(auth_key, auth_xform->auth.key.data,
 318                                 auth_xform->auth.key.length);
 319         }
 320
 321         /* auth_key must be NULL if auth algorithm does not use HMAC */
 322         sess->sam_sess_params.auth_key = auth_key;
 323         sess->sam_sess_params.auth_key_len = auth_xform->auth.key.length;
 324
 325         return 0;
 326 }
 327
 328 /**
 329  * Set session parameters for aead part.
 330  *
 331  * @param sess Crypto session pointer.
 332  * @param aead_xform Pointer to configuration structure for aead operations.
 333  * @returns 0 in case of success, negative value otherwise.
 334  */
 335 static int
 336 mrvl_crypto_set_aead_session_parameters(struct mrvl_crypto_session *sess,
 337                 const struct rte_crypto_sym_xform *aead_xform)
 338 {
 339         uint8_t *aead_key;
 340
 341         /* Make sure we've got proper struct */
 342         if (aead_xform->type != RTE_CRYPTO_SYM_XFORM_AEAD) {
 343                 MRVL_LOG(ERR, "Wrong xform struct provided!");
 344                 return -EINVAL;
 345         }
 346
 347         /* See if map data is present and valid */
 348         if ((aead_xform->aead.algo > RTE_DIM(aead_map)) ||
 349                 (aead_map[aead_xform->aead.algo].supported
 350                         != ALGO_SUPPORTED)) {
 351                 MRVL_LOG(ERR, "AEAD algorithm not supported!");
 352                 return -EINVAL;
 353         }
 354
 355         sess->sam_sess_params.dir =
 356                 (aead_xform->aead.op == RTE_CRYPTO_AEAD_OP_ENCRYPT) ?
 357                 SAM_DIR_ENCRYPT : SAM_DIR_DECRYPT;
 358         sess->sam_sess_params.cipher_alg =
 359                 aead_map[aead_xform->aead.algo].cipher_alg;
 360         sess->sam_sess_params.cipher_mode =
 361                 aead_map[aead_xform->aead.algo].cipher_mode;
 362
 363         /* Assume IV will be passed together with data. */
 364         sess->sam_sess_params.cipher_iv = NULL;
 365
 366         /* Get max key length. */
 367         if (aead_xform->aead.key.length >
 368                 aead_map[aead_xform->aead.algo].max_key_len) {
 369                 MRVL_LOG(ERR, "Wrong key length!");
 370                 return -EINVAL;
 371         }
 372
 373         aead_key = malloc(aead_xform->aead.key.length);
 374         if (aead_key == NULL) {
 375                 MRVL_LOG(ERR, "Insufficient memory!");
 376                 return -ENOMEM;
 377         }
 378
 379         memcpy(aead_key, aead_xform->aead.key.data,
 380                         aead_xform->aead.key.length);
 381
 382         sess->sam_sess_params.cipher_key = aead_key;
 383         sess->sam_sess_params.cipher_key_len = aead_xform->aead.key.length;
 384
 385         if (sess->sam_sess_params.cipher_mode == SAM_CIPHER_GCM)
 386                 sess->sam_sess_params.auth_alg = SAM_AUTH_AES_GCM;
 387
 388         sess->sam_sess_params.u.basic.auth_icv_len =
 389                 aead_xform->aead.digest_length;
 390
 391         sess->sam_sess_params.u.basic.auth_aad_len =
 392                 aead_xform->aead.aad_length;
 393
 394         return 0;
 395 }
 396
 397 /**
 398  * Parse crypto transform chain and setup session parameters.
 399  *
 400  * @param dev Pointer to crypto device
 401  * @param sess Poiner to crypto session
 402  * @param xform Pointer to configuration structure chain for crypto operations.
 403  * @returns 0 in case of success, negative value otherwise.
 404  */
 405 int
 406 mrvl_crypto_set_session_parameters(struct mrvl_crypto_session *sess,
 407                 const struct rte_crypto_sym_xform *xform)
 408 {
 409         const struct rte_crypto_sym_xform *cipher_xform = NULL;
 410         const struct rte_crypto_sym_xform *auth_xform = NULL;
 411         const struct rte_crypto_sym_xform *aead_xform = NULL;
 412
 413         /* Filter out spurious/broken requests */
 414         if (xform == NULL)
 415                 return -EINVAL;
 416
 417         sess->chain_order = mrvl_crypto_get_chain_order(xform);
 418         switch (sess->chain_order) {
 419         case MRVL_CRYPTO_CHAIN_CIPHER_AUTH:
 420                 cipher_xform = xform;
 421                 auth_xform = xform->next;
 422                 break;
 423         case MRVL_CRYPTO_CHAIN_AUTH_CIPHER:
 424                 auth_xform = xform;
 425                 cipher_xform = xform->next;
 426                 break;
 427         case MRVL_CRYPTO_CHAIN_CIPHER_ONLY:
 428                 cipher_xform = xform;
 429                 break;
 430         case MRVL_CRYPTO_CHAIN_AUTH_ONLY:
 431                 auth_xform = xform;
 432                 break;
 433         case MRVL_CRYPTO_CHAIN_COMBINED:
 434                 aead_xform = xform;
 435                 break;
 436         default:
 437                 return -EINVAL;
 438         }
 439
 440         if ((cipher_xform != NULL) &&
 441                 (mrvl_crypto_set_cipher_session_parameters(
 442                         sess, cipher_xform) < 0)) {
 443                 MRVL_LOG(ERR, "Invalid/unsupported cipher parameters!");
 444                 return -EINVAL;
 445         }
 446
 447         if ((auth_xform != NULL) &&
 448                 (mrvl_crypto_set_auth_session_parameters(
 449                         sess, auth_xform) < 0)) {
 450                 MRVL_LOG(ERR, "Invalid/unsupported auth parameters!");
 451                 return -EINVAL;
 452         }
 453
 454         if ((aead_xform != NULL) &&
 455                 (mrvl_crypto_set_aead_session_parameters(
 456                         sess, aead_xform) < 0)) {
 457                 MRVL_LOG(ERR, "Invalid/unsupported aead parameters!");
 458                 return -EINVAL;
 459         }
 460
 461         return 0;
 462 }
 463
 464 /*
 465  *-----------------------------------------------------------------------------
 466  * Process Operations
 467  *-----------------------------------------------------------------------------
 468  */
 469
 470 /**
 471  * Prepare a single request.
 472  *
 473  * This function basically translates DPDK crypto request into one
 474  * understandable by MUDSK's SAM. If this is a first request in a session,
 475  * it starts the session.
 476  *
 477  * @param request Pointer to pre-allocated && reset request buffer [Out].
 478  * @param src_bd Pointer to pre-allocated source descriptor [Out].
 479  * @param dst_bd Pointer to pre-allocated destination descriptor [Out].
 480  * @param op Pointer to DPDK crypto operation struct [In].
 481  */
 482 static inline int
 483 mrvl_request_prepare(struct sam_cio_op_params *request,
 484                 struct sam_buf_info *src_bd,
 485                 struct sam_buf_info *dst_bd,
 486                 struct rte_crypto_op *op)
 487 {
 488         struct mrvl_crypto_session *sess;
 489         struct rte_mbuf *src_mbuf, *dst_mbuf;
 490         uint16_t segments_nb;
 491         uint8_t *digest;
 492         int i;
 493
 494         if (unlikely(op->sess_type == RTE_CRYPTO_OP_SESSIONLESS)) {
 495                 MRVL_LOG(ERR, "MRVL CRYPTO PMD only supports session "
 496                                 "oriented requests, op (%p) is sessionless!",
 497                                 op);
 498                 return -EINVAL;
 499         }
 500
 501         sess = (struct mrvl_crypto_session *)get_sym_session_private_data(
 502                         op->sym->session, cryptodev_driver_id);
 503         if (unlikely(sess == NULL)) {
 504                 MRVL_LOG(ERR, "Session was not created for this device!");
 505                 return -EINVAL;
 506         }
 507
 508         request->sa = sess->sam_sess;
 509         request->cookie = op;
 510
 511         src_mbuf = op->sym->m_src;
 512         segments_nb = src_mbuf->nb_segs;
 513         /* The following conditions must be met:
 514          * - Destination buffer is required when segmented source buffer
 515          * - Segmented destination buffer is not supported
 516          */
 517         if ((segments_nb > 1) && (!op->sym->m_dst)) {
 518                 MRVL_LOG(ERR, "op->sym->m_dst = NULL!");
 519                 return -1;
 520         }
 521         /* For non SG case:
 522          * If application delivered us null dst buffer, it means it expects
 523          * us to deliver the result in src buffer.
 524          */
 525         dst_mbuf = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
 526
 527         if (!rte_pktmbuf_is_contiguous(dst_mbuf)) {
 528                 MRVL_LOG(ERR, "Segmented destination buffer not supported!");
 529                 return -1;
 530         }
 531
 532         request->num_bufs = segments_nb;
 533         for (i = 0; i < segments_nb; i++) {
 534                 /* Empty source. */
 535                 if (rte_pktmbuf_data_len(src_mbuf) == 0) {
 536                         /* EIP does not support 0 length buffers. */
 537                         MRVL_LOG(ERR, "Buffer length == 0 not supported!");
 538                         return -1;
 539                 }
 540                 src_bd[i].vaddr = rte_pktmbuf_mtod(src_mbuf, void *);
 541                 src_bd[i].paddr = rte_pktmbuf_iova(src_mbuf);
 542                 src_bd[i].len = rte_pktmbuf_data_len(src_mbuf);
 543
 544                 src_mbuf = src_mbuf->next;
 545         }
 546         request->src = src_bd;
 547
 548         /* Empty destination. */
 549         if (rte_pktmbuf_data_len(dst_mbuf) == 0) {
 550                 /* Make dst buffer fit at least source data. */
 551                 if (rte_pktmbuf_append(dst_mbuf,
 552                         rte_pktmbuf_data_len(op->sym->m_src)) == NULL) {
 553                         MRVL_LOG(ERR, "Unable to set big enough dst buffer!");
 554                         return -1;
 555                 }
 556         }
 557
 558         request->dst = dst_bd;
 559         dst_bd->vaddr = rte_pktmbuf_mtod(dst_mbuf, void *);
 560         dst_bd->paddr = rte_pktmbuf_iova(dst_mbuf);
 561
 562         /*
 563          * We can use all available space in dst_mbuf,
 564          * not only what's used currently.
 565          */
 566         dst_bd->len = dst_mbuf->buf_len - rte_pktmbuf_headroom(dst_mbuf);
 567
 568         if (sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED) {
 569                 request->cipher_len = op->sym->aead.data.length;
 570                 request->cipher_offset = op->sym->aead.data.offset;
 571                 request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 572                         sess->cipher_iv_offset);
 573
 574                 request->auth_aad = op->sym->aead.aad.data;
 575                 request->auth_offset = request->cipher_offset;
 576                 request->auth_len = request->cipher_len;
 577         } else {
 578                 request->cipher_len = op->sym->cipher.data.length;
 579                 request->cipher_offset = op->sym->cipher.data.offset;
 580                 request->cipher_iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 581                                 sess->cipher_iv_offset);
 582
 583                 request->auth_offset = op->sym->auth.data.offset;
 584                 request->auth_len = op->sym->auth.data.length;
 585         }
 586
 587         digest = sess->chain_order == MRVL_CRYPTO_CHAIN_COMBINED ?
 588                 op->sym->aead.digest.data : op->sym->auth.digest.data;
 589         if (digest == NULL) {
 590                 /* No auth - no worry. */
 591                 return 0;
 592         }
 593
 594         request->auth_icv_offset = request->auth_offset + request->auth_len;
 595
 596         /*
 597          * EIP supports only scenarios where ICV(digest buffer) is placed at
 598          * auth_icv_offset.
 599          */
 600         if (sess->sam_sess_params.dir == SAM_DIR_ENCRYPT) {
 601                 /*
 602                  * This should be the most common case anyway,
 603                  * EIP will overwrite DST buffer at auth_icv_offset.
 604                  */
 605                 if (rte_pktmbuf_mtod_offset(
 606                                 dst_mbuf, uint8_t *,
 607                                 request->auth_icv_offset) == digest)
 608                         return 0;
 609         } else {/* sess->sam_sess_params.dir == SAM_DIR_DECRYPT */
 610                 /*
 611                  * EIP will look for digest at auth_icv_offset
 612                  * offset in SRC buffer. It must be placed in the last
 613                  * segment and the offset must be set to reach digest
 614                  * in the last segment
 615                  */
 616                 struct rte_mbuf *last_seg =  op->sym->m_src;
 617                 uint32_t d_offset = request->auth_icv_offset;
 618                 u32 d_size = sess->sam_sess_params.u.basic.auth_icv_len;
 619                 unsigned char *d_ptr;
 620
 621                 /* Find the last segment and the offset for the last segment */
 622                 while ((last_seg->next != NULL) &&
 623                                 (d_offset >= last_seg->data_len)) {
 624                         d_offset -= last_seg->data_len;
 625                         last_seg = last_seg->next;
 626                 }
 627
 628                 if (rte_pktmbuf_mtod_offset(last_seg, uint8_t *,
 629                                             d_offset) == digest)
 630                         return 0;
 631
 632                 /* copy digest to last segment */
 633                 if (last_seg->buf_len >= (d_size + d_offset)) {
 634                         d_ptr = (unsigned char *)last_seg->buf_addr +
 635                                  d_offset;
 636                         rte_memcpy(d_ptr, digest, d_size);
 637                         return 0;
 638                 }
 639         }
 640
 641         /*
 642          * If we landed here it means that digest pointer is
 643          * at different than expected place.
 644          */
 645         return -1;
 646 }
 647
 648 /*
 649  *-----------------------------------------------------------------------------
 650  * PMD Framework handlers
 651  *-----------------------------------------------------------------------------
 652  */
 653
 654 /**
 655  * Enqueue burst.
 656  *
 657  * @param queue_pair Pointer to queue pair.
 658  * @param ops Pointer to ops requests array.
 659  * @param nb_ops Number of elements in ops requests array.
 660  * @returns Number of elements consumed from ops.
 661  */
 662 static uint16_t
 663 mrvl_crypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
 664                 uint16_t nb_ops)
 665 {
 666         uint16_t iter_ops = 0;
 667         uint16_t to_enq = 0;
 668         uint16_t consumed = 0;
 669         int ret;
 670         struct sam_cio_op_params requests[nb_ops];
 671         /*
 672          * SAM does not store bd pointers, so on-stack scope will be enough.
 673          */
 674         struct mrvl_crypto_src_table src_bd[nb_ops];
 675         struct sam_buf_info          dst_bd[nb_ops];
 676         struct mrvl_crypto_qp *qp = (struct mrvl_crypto_qp *)queue_pair;
 677
 678         if (nb_ops == 0)
 679                 return 0;
 680
 681         /* Prepare the burst. */
 682         memset(&requests, 0, sizeof(requests));
 683         memset(&src_bd, 0, sizeof(src_bd));
 684
 685         /* Iterate through */
 686         for (; iter_ops < nb_ops; ++iter_ops) {
 687                 /* store the op id for debug */
 688                 src_bd[iter_ops].iter_ops = iter_ops;
 689                 if (mrvl_request_prepare(&requests[iter_ops],
 690                                         src_bd[iter_ops].src_bd,
 691                                         &dst_bd[iter_ops],
 692                                         ops[iter_ops]) < 0) {
 693                         MRVL_LOG(ERR, "Error while preparing parameters!");
 694                         qp->stats.enqueue_err_count++;
 695                         ops[iter_ops]->status = RTE_CRYPTO_OP_STATUS_ERROR;
 696
 697                         /*
 698                          * Number of handled ops is increased
 699                          * (even if the result of handling is error).
 700                          */
 701                         ++consumed;
 702                         break;
 703                 }
 704
 705                 ops[iter_ops]->status =
 706                         RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
 707
 708                 /* Increase the number of ops to enqueue. */
 709                 ++to_enq;
 710         } /* for (; iter_ops < nb_ops;... */
 711
 712         if (to_enq > 0) {
 713                 /* Send the burst */
 714                 ret = sam_cio_enq(qp->cio, requests, &to_enq);
 715                 consumed += to_enq;
 716                 if (ret < 0) {
 717                         /*
 718                          * Trust SAM that in this case returned value will be at
 719                          * some point correct (now it is returned unmodified).
 720                          */
 721                         qp->stats.enqueue_err_count += to_enq;
 722                         for (iter_ops = 0; iter_ops < to_enq; ++iter_ops)
 723                                 ops[iter_ops]->status =
 724                                         RTE_CRYPTO_OP_STATUS_ERROR;
 725                 }
 726         }
 727
 728         qp->stats.enqueued_count += to_enq;
 729         return consumed;
 730 }
 731
 732 /**
 733  * Dequeue burst.
 734  *
 735  * @param queue_pair Pointer to queue pair.
 736  * @param ops Pointer to ops requests array.
 737  * @param nb_ops Number of elements in ops requests array.
 738  * @returns Number of elements dequeued.
 739  */
 740 static uint16_t
 741 mrvl_crypto_pmd_dequeue_burst(void *queue_pair,
 742                 struct rte_crypto_op **ops,
 743                 uint16_t nb_ops)
 744 {
 745         int ret;
 746         struct mrvl_crypto_qp *qp = queue_pair;
 747         struct sam_cio *cio = qp->cio;
 748         struct sam_cio_op_result results[nb_ops];
 749         uint16_t i;
 750
 751         ret = sam_cio_deq(cio, results, &nb_ops);
 752         if (ret < 0) {
 753                 /* Count all dequeued as error. */
 754                 qp->stats.dequeue_err_count += nb_ops;
 755
 756                 /* But act as they were dequeued anyway*/
 757                 qp->stats.dequeued_count += nb_ops;
 758
 759                 return 0;
 760         }
 761
 762         /* Unpack and check results. */
 763         for (i = 0; i < nb_ops; ++i) {
 764                 ops[i] = results[i].cookie;
 765
 766                 switch (results[i].status) {
 767                 case SAM_CIO_OK:
 768                         ops[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 769                         break;
 770                 case SAM_CIO_ERR_ICV:
 771                         MRVL_LOG(DEBUG, "CIO returned SAM_CIO_ERR_ICV.");
 772                         ops[i]->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 773                         break;
 774                 default:
 775                         MRVL_LOG(DEBUG,
 776                                 "CIO returned Error: %d.", results[i].status);
 777                         ops[i]->status = RTE_CRYPTO_OP_STATUS_ERROR;
 778                         break;
 779                 }
 780         }
 781
 782         qp->stats.dequeued_count += nb_ops;
 783         return nb_ops;
 784 }
 785
 786 /**
 787  * Create a new crypto device.
 788  *
 789  * @param name Driver name.
 790  * @param vdev Pointer to device structure.
 791  * @param init_params Pointer to initialization parameters.
 792  * @returns 0 in case of success, negative value otherwise.
 793  */
 794 static int
 795 cryptodev_mrvl_crypto_create(const char *name,
 796                 struct rte_vdev_device *vdev,
 797                 struct mrvl_pmd_init_params *init_params)
 798 {
 799         struct rte_cryptodev *dev;
 800         struct mrvl_crypto_private *internals;
 801         struct sam_init_params  sam_params;
 802         int ret = -EINVAL;
 803
 804         dev = rte_cryptodev_pmd_create(name, &vdev->device,
 805                         &init_params->common);
 806         if (dev == NULL) {
 807                 MRVL_LOG(ERR, "Failed to create cryptodev vdev!");
 808                 goto init_error;
 809         }
 810
 811         dev->driver_id = cryptodev_driver_id;
 812         dev->dev_ops = rte_mrvl_crypto_pmd_ops;
 813
 814         /* Register rx/tx burst functions for data path. */
 815         dev->enqueue_burst = mrvl_crypto_pmd_enqueue_burst;
 816         dev->dequeue_burst = mrvl_crypto_pmd_dequeue_burst;
 817
 818         dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
 819                         RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
 820                         RTE_CRYPTODEV_FF_HW_ACCELERATED |
 821                         RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
 822                         RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT;
 823
 824         /* Set vector instructions mode supported */
 825         internals = dev->data->dev_private;
 826
 827         internals->max_nb_qpairs = init_params->common.max_nb_queue_pairs;
 828         internals->max_nb_sessions = init_params->max_nb_sessions;
 829
 830         ret = rte_mvep_init(MVEP_MOD_T_SAM, NULL);
 831         if (ret)
 832                 goto init_error;
 833
 834         sam_params.max_num_sessions = internals->max_nb_sessions;
 835
 836         /* sam_set_debug_flags(3); */
 837
 838         ret = sam_init(&sam_params);
 839         if (ret)
 840                 goto init_error;
 841
 842         return 0;
 843
 844 init_error:
 845         MRVL_LOG(ERR,
 846                 "Driver %s: %s failed!", init_params->common.name, __func__);
 847
 848         cryptodev_mrvl_crypto_uninit(vdev);
 849         return ret;
 850 }
 851
 852 /** Parse integer from integer argument */
 853 static int
 854 parse_integer_arg(const char *key __rte_unused,
 855                 const char *value, void *extra_args)
 856 {
 857         int *i = (int *) extra_args;
 858
 859         *i = atoi(value);
 860         if (*i < 0) {
 861                 MRVL_LOG(ERR, "Argument has to be positive!");
 862                 return -EINVAL;
 863         }
 864
 865         return 0;
 866 }
 867
 868 /** Parse name */
 869 static int
 870 parse_name_arg(const char *key __rte_unused,
 871                 const char *value, void *extra_args)
 872 {
 873         struct rte_cryptodev_pmd_init_params *params = extra_args;
 874
 875         if (strlen(value) >= RTE_CRYPTODEV_NAME_MAX_LEN - 1) {
 876                 MRVL_LOG(ERR, "Invalid name %s, should be less than %u bytes!",
 877                          value, RTE_CRYPTODEV_NAME_MAX_LEN - 1);
 878                 return -EINVAL;
 879         }
 880
 881         strncpy(params->name, value, RTE_CRYPTODEV_NAME_MAX_LEN);
 882
 883         return 0;
 884 }
 885
 886 static int
 887 mrvl_pmd_parse_input_args(struct mrvl_pmd_init_params *params,
 888                          const char *input_args)
 889 {
 890         struct rte_kvargs *kvlist = NULL;
 891         int ret = 0;
 892
 893         if (params == NULL)
 894                 return -EINVAL;
 895
 896         if (input_args) {
 897                 kvlist = rte_kvargs_parse(input_args,
 898                                           mrvl_pmd_valid_params);
 899                 if (kvlist == NULL)
 900                         return -1;
 901
 902                 /* Common VDEV parameters */
 903                 ret = rte_kvargs_process(kvlist,
 904                                          RTE_CRYPTODEV_PMD_MAX_NB_QP_ARG,
 905                                          &parse_integer_arg,
 906                                          &params->common.max_nb_queue_pairs);
 907                 if (ret < 0)
 908                         goto free_kvlist;
 909
 910                 ret = rte_kvargs_process(kvlist,
 911                                          RTE_CRYPTODEV_PMD_SOCKET_ID_ARG,
 912                                          &parse_integer_arg,
 913                                          &params->common.socket_id);
 914                 if (ret < 0)
 915                         goto free_kvlist;
 916
 917                 ret = rte_kvargs_process(kvlist,
 918                                          RTE_CRYPTODEV_PMD_NAME_ARG,
 919                                          &parse_name_arg,
 920                                          &params->common);
 921                 if (ret < 0)
 922                         goto free_kvlist;
 923
 924                 ret = rte_kvargs_process(kvlist,
 925                                          MRVL_PMD_MAX_NB_SESS_ARG,
 926                                          &parse_integer_arg,
 927                                          params);
 928                 if (ret < 0)
 929                         goto free_kvlist;
 930
 931         }
 932
 933 free_kvlist:
 934         rte_kvargs_free(kvlist);
 935         return ret;
 936 }
 937
 938 /**
 939  * Initialize the crypto device.
 940  *
 941  * @param vdev Pointer to device structure.
 942  * @returns 0 in case of success, negative value otherwise.
 943  */
 944 static int
 945 cryptodev_mrvl_crypto_init(struct rte_vdev_device *vdev)
 946 {
 947         struct mrvl_pmd_init_params init_params = {
 948                 .common = {
 949                         .name = "",
 950                         .private_data_size =
 951                                 sizeof(struct mrvl_crypto_private),
 952                         .max_nb_queue_pairs =
 953                                 sam_get_num_inst() * sam_get_num_cios(0),
 954                         .socket_id = rte_socket_id()
 955                 },
 956                 .max_nb_sessions = MRVL_PMD_DEFAULT_MAX_NB_SESSIONS
 957         };
 958
 959         const char *name, *args;
 960         int ret;
 961
 962         name = rte_vdev_device_name(vdev);
 963         if (name == NULL)
 964                 return -EINVAL;
 965         args = rte_vdev_device_args(vdev);
 966
 967         ret = mrvl_pmd_parse_input_args(&init_params, args);
 968         if (ret) {
 969                 MRVL_LOG(ERR, "Failed to parse initialisation arguments[%s]!",
 970                          args);
 971                 return -EINVAL;
 972         }
 973
 974         return cryptodev_mrvl_crypto_create(name, vdev, &init_params);
 975 }
 976
 977 /**
 978  * Uninitialize the crypto device
 979  *
 980  * @param vdev Pointer to device structure.
 981  * @returns 0 in case of success, negative value otherwise.
 982  */
 983 static int
 984 cryptodev_mrvl_crypto_uninit(struct rte_vdev_device *vdev)
 985 {
 986         struct rte_cryptodev *cryptodev;
 987         const char *name = rte_vdev_device_name(vdev);
 988
 989         if (name == NULL)
 990                 return -EINVAL;
 991
 992         MRVL_LOG(INFO, "Closing Marvell crypto device %s on numa socket %u.",
 993                  name, rte_socket_id());
 994
 995         sam_deinit();
 996         rte_mvep_deinit(MVEP_MOD_T_SAM);
 997
 998         cryptodev = rte_cryptodev_pmd_get_named_dev(name);
 999         if (cryptodev == NULL)
1000                 return -ENODEV;
1001
1002         return rte_cryptodev_pmd_destroy(cryptodev);
1003 }
1004
1005 /**
1006  * Basic driver handlers for use in the constructor.
1007  */
1008 static struct rte_vdev_driver cryptodev_mrvl_pmd_drv = {
1009         .probe = cryptodev_mrvl_crypto_init,
1010         .remove = cryptodev_mrvl_crypto_uninit
1011 };
1012
1013 static struct cryptodev_driver mrvl_crypto_drv;
1014
1015 /* Register the driver in constructor. */
1016 RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_MRVL_PMD, cryptodev_mrvl_pmd_drv);
1017 RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_MRVL_PMD,
1018         "max_nb_queue_pairs=<int> "
1019         "max_nb_sessions=<int> "
1020         "socket_id=<int>");
1021 RTE_PMD_REGISTER_CRYPTO_DRIVER(mrvl_crypto_drv, cryptodev_mrvl_pmd_drv.driver,
1022                 cryptodev_driver_id);
1023
1024 RTE_INIT(crypto_mrvl_init_log)
1025 {
1026         mrvl_logtype_driver = rte_log_register("pmd.crypto.mvsam");
1027 }