drivers/crypto/qat/qat_sym.h

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2015-2018 Intel Corporation
   3  */
   4
   5 #ifndef _QAT_SYM_H_
   6 #define _QAT_SYM_H_
   7
   8 #include <rte_cryptodev_pmd.h>
   9 #ifdef RTE_LIBRTE_SECURITY
  10 #include <rte_net_crc.h>
  11 #endif
  12
  13 #ifdef BUILD_QAT_SYM
  14 #include <openssl/evp.h>
  15
  16 #include "qat_common.h"
  17 #include "qat_sym_session.h"
  18 #include "qat_sym_pmd.h"
  19 #include "qat_logs.h"
  20
  21 #define BYTE_LENGTH    8
  22 /* bpi is only used for partial blocks of DES and AES
  23  * so AES block len can be assumed as max len for iv, src and dst
  24  */
  25 #define BPI_MAX_ENCR_IV_LEN ICP_QAT_HW_AES_BLK_SZ
  26
  27 /*
  28  * Maximum number of SGL entries
  29  */
  30 #define QAT_SYM_SGL_MAX_NUMBER  16
  31
  32 struct qat_sym_session;
  33
  34 struct qat_sym_sgl {
  35         qat_sgl_hdr;
  36         struct qat_flat_buf buffers[QAT_SYM_SGL_MAX_NUMBER];
  37 } __rte_packed __rte_cache_aligned;
  38
  39 struct qat_sym_op_cookie {
  40         struct qat_sym_sgl qat_sgl_src;
  41         struct qat_sym_sgl qat_sgl_dst;
  42         phys_addr_t qat_sgl_src_phys_addr;
  43         phys_addr_t qat_sgl_dst_phys_addr;
  44 };
  45
  46 int
  47 qat_sym_build_request(void *in_op, uint8_t *out_msg,
  48                 void *op_cookie, enum qat_device_gen qat_dev_gen);
  49
  50
  51 /** Encrypt a single partial block
  52  *  Depends on openssl libcrypto
  53  *  Uses ECB+XOR to do CFB encryption, same result, more performant
  54  */
  55 static inline int
  56 bpi_cipher_encrypt(uint8_t *src, uint8_t *dst,
  57                 uint8_t *iv, int ivlen, int srclen,
  58                 void *bpi_ctx)
  59 {
  60         EVP_CIPHER_CTX *ctx = (EVP_CIPHER_CTX *)bpi_ctx;
  61         int encrypted_ivlen;
  62         uint8_t encrypted_iv[BPI_MAX_ENCR_IV_LEN];
  63         uint8_t *encr = encrypted_iv;
  64
  65         /* ECB method: encrypt the IV, then XOR this with plaintext */
  66         if (EVP_EncryptUpdate(ctx, encrypted_iv, &encrypted_ivlen, iv, ivlen)
  67                                                                 <= 0)
  68                 goto cipher_encrypt_err;
  69
  70         for (; srclen != 0; --srclen, ++dst, ++src, ++encr)
  71                 *dst = *src ^ *encr;
  72
  73         return 0;
  74
  75 cipher_encrypt_err:
  76         QAT_DP_LOG(ERR, "libcrypto ECB cipher encrypt failed");
  77         return -EINVAL;
  78 }
  79
  80 static inline uint32_t
  81 qat_bpicipher_postprocess(struct qat_sym_session *ctx,
  82                                 struct rte_crypto_op *op)
  83 {
  84         int block_len = qat_cipher_get_block_size(ctx->qat_cipher_alg);
  85         struct rte_crypto_sym_op *sym_op = op->sym;
  86         uint8_t last_block_len = block_len > 0 ?
  87                         sym_op->cipher.data.length % block_len : 0;
  88
  89         if (last_block_len > 0 &&
  90                         ctx->qat_dir == ICP_QAT_HW_CIPHER_ENCRYPT) {
  91
  92                 /* Encrypt last block */
  93                 uint8_t *last_block, *dst, *iv;
  94                 uint32_t last_block_offset;
  95
  96                 last_block_offset = sym_op->cipher.data.offset +
  97                                 sym_op->cipher.data.length - last_block_len;
  98                 last_block = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_src,
  99                                 uint8_t *, last_block_offset);
 100
 101                 if (unlikely(sym_op->m_dst != NULL))
 102                         /* out-of-place operation (OOP) */
 103                         dst = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_dst,
 104                                                 uint8_t *, last_block_offset);
 105                 else
 106                         dst = last_block;
 107
 108                 if (last_block_len < sym_op->cipher.data.length)
 109                         /* use previous block ciphertext as IV */
 110                         iv = dst - block_len;
 111                 else
 112                         /* runt block, i.e. less than one full block */
 113                         iv = rte_crypto_op_ctod_offset(op, uint8_t *,
 114                                         ctx->cipher_iv.offset);
 115
 116 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
 117                 QAT_DP_HEXDUMP_LOG(DEBUG, "BPI: src before post-process:",
 118                         last_block, last_block_len);
 119                 if (sym_op->m_dst != NULL)
 120                         QAT_DP_HEXDUMP_LOG(DEBUG,
 121                                 "BPI: dst before post-process:",
 122                                 dst, last_block_len);
 123 #endif
 124                 bpi_cipher_encrypt(last_block, dst, iv, block_len,
 125                                 last_block_len, ctx->bpi_ctx);
 126 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
 127                 QAT_DP_HEXDUMP_LOG(DEBUG, "BPI: src after post-process:",
 128                                 last_block, last_block_len);
 129                 if (sym_op->m_dst != NULL)
 130                         QAT_DP_HEXDUMP_LOG(DEBUG,
 131                                 "BPI: dst after post-process:",
 132                                 dst, last_block_len);
 133 #endif
 134         }
 135         return sym_op->cipher.data.length - last_block_len;
 136 }
 137
 138 #ifdef RTE_LIBRTE_SECURITY
 139 static inline void
 140 qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op)
 141 {
 142         struct rte_crypto_sym_op *sym_op = op->sym;
 143         uint32_t crc_data_ofs, crc_data_len, crc;
 144         uint8_t *crc_data;
 145
 146         if (ctx->qat_dir == ICP_QAT_HW_CIPHER_DECRYPT &&
 147                         sym_op->auth.data.length != 0) {
 148
 149                 crc_data_ofs = sym_op->auth.data.offset;
 150                 crc_data_len = sym_op->auth.data.length;
 151                 crc_data = rte_pktmbuf_mtod_offset(sym_op->m_src, uint8_t *,
 152                                 crc_data_ofs);
 153
 154                 crc = rte_net_crc_calc(crc_data, crc_data_len,
 155                                 RTE_NET_CRC32_ETH);
 156
 157                 if (crc != *(uint32_t *)(crc_data + crc_data_len))
 158                         op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 159         }
 160 }
 161 #endif
 162
 163 static inline void
 164 qat_sym_process_response(void **op, uint8_t *resp)
 165 {
 166         struct icp_qat_fw_comn_resp *resp_msg =
 167                         (struct icp_qat_fw_comn_resp *)resp;
 168         struct rte_crypto_op *rx_op = (struct rte_crypto_op *)(uintptr_t)
 169                         (resp_msg->opaque_data);
 170         struct qat_sym_session *sess;
 171
 172 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
 173         QAT_DP_HEXDUMP_LOG(DEBUG, "qat_response:", (uint8_t *)resp_msg,
 174                         sizeof(struct icp_qat_fw_comn_resp));
 175 #endif
 176
 177         if (ICP_QAT_FW_COMN_STATUS_FLAG_OK !=
 178                         ICP_QAT_FW_COMN_RESP_CRYPTO_STAT_GET(
 179                         resp_msg->comn_hdr.comn_status)) {
 180
 181                 rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 182         } else {
 183 #ifdef RTE_LIBRTE_SECURITY
 184                 uint8_t is_docsis_sec = 0;
 185
 186                 if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) {
 187                         /*
 188                          * Assuming at this point that if it's a security
 189                          * op, that this is for DOCSIS
 190                          */
 191                         sess = (struct qat_sym_session *)
 192                                         get_sec_session_private_data(
 193                                         rx_op->sym->sec_session);
 194                         is_docsis_sec = 1;
 195                 } else
 196 #endif
 197                 {
 198                         sess = (struct qat_sym_session *)
 199                                         get_sym_session_private_data(
 200                                         rx_op->sym->session,
 201                                         qat_sym_driver_id);
 202                 }
 203
 204                 rx_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 205
 206                 if (sess->bpi_ctx) {
 207                         qat_bpicipher_postprocess(sess, rx_op);
 208 #ifdef RTE_LIBRTE_SECURITY
 209                         if (is_docsis_sec)
 210                                 qat_crc_verify(sess, rx_op);
 211 #endif
 212                 }
 213         }
 214         *op = (void *)rx_op;
 215 }
 216 #else
 217
 218 static inline void
 219 qat_sym_process_response(void **op __rte_unused, uint8_t *resp __rte_unused)
 220 {
 221 }
 222 #endif
 223 #endif /* _QAT_SYM_H_ */