drivers/net/cxgbe/base/t4vf_hw.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2018 Chelsio Communications.
   3  * All rights reserved.
   4  */
   5
   6 #include <rte_ethdev_driver.h>
   7 #include <rte_ether.h>
   8
   9 #include "common.h"
  10 #include "t4_regs.h"
  11
  12 /**
  13  * t4vf_wait_dev_ready - wait till to reads of registers work
  14  *
  15  * Wait for the device to become ready (signified by our "who am I" register
  16  * returning a value other than all 1's).  Return an error if it doesn't
  17  * become ready ...
  18  */
  19 static int t4vf_wait_dev_ready(struct adapter *adapter)
  20 {
  21         const u32 whoami = T4VF_PL_BASE_ADDR + A_PL_VF_WHOAMI;
  22         const u32 notready1 = 0xffffffff;
  23         const u32 notready2 = 0xeeeeeeee;
  24         u32 val;
  25
  26         val = t4_read_reg(adapter, whoami);
  27         if (val != notready1 && val != notready2)
  28                 return 0;
  29
  30         msleep(500);
  31         val = t4_read_reg(adapter, whoami);
  32         if (val != notready1 && val != notready2)
  33                 return 0;
  34
  35         dev_err(adapter, "Device didn't become ready for access, whoami = %#x\n",
  36                 val);
  37         return -EIO;
  38 }
  39
  40 /*
  41  * Get the reply to a mailbox command and store it in @rpl in big-endian order.
  42  */
  43 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
  44                          u32 mbox_addr)
  45 {
  46         for ( ; nflit; nflit--, mbox_addr += 8)
  47                 *rpl++ = htobe64(t4_read_reg64(adap, mbox_addr));
  48 }
  49
  50 /**
  51  * t4vf_wr_mbox_core - send a command to FW through the mailbox
  52  * @adapter: the adapter
  53  * @cmd: the command to write
  54  * @size: command length in bytes
  55  * @rpl: where to optionally store the reply
  56  * @sleep_ok: if true we may sleep while awaiting command completion
  57  *
  58  * Sends the given command to FW through the mailbox and waits for the
  59  * FW to execute the command.  If @rpl is not %NULL it is used to store
  60  * the FW's reply to the command.  The command and its optional reply
  61  * are of the same length.  FW can take up to 500 ms to respond.
  62  * @sleep_ok determines whether we may sleep while awaiting the response.
  63  * If sleeping is allowed we use progressive backoff otherwise we spin.
  64  *
  65  * The return value is 0 on success or a negative errno on failure.  A
  66  * failure can happen either because we are not able to execute the
  67  * command or FW executes it but signals an error.  In the latter case
  68  * the return value is the error code indicated by FW (negated).
  69  */
  70 int t4vf_wr_mbox_core(struct adapter *adapter,
  71                       const void __attribute__((__may_alias__)) *cmd,
  72                       int size, void *rpl, bool sleep_ok)
  73 {
  74         /*
  75          * We delay in small increments at first in an effort to maintain
  76          * responsiveness for simple, fast executing commands but then back
  77          * off to larger delays to a maximum retry delay.
  78          */
  79         static const int delay[] = {
  80                 1, 1, 3, 5, 10, 10, 20, 50, 100
  81         };
  82
  83
  84         u32 mbox_ctl = T4VF_CIM_BASE_ADDR + A_CIM_VF_EXT_MAILBOX_CTRL;
  85         __be64 cmd_rpl[MBOX_LEN / 8];
  86         struct mbox_entry entry;
  87         unsigned int delay_idx;
  88         u32 v, mbox_data;
  89         const __be64 *p;
  90         int i, ret;
  91         int ms;
  92
  93         /* In T6, mailbox size is changed to 128 bytes to avoid
  94          * invalidating the entire prefetch buffer.
  95          */
  96         if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
  97                 mbox_data = T4VF_MBDATA_BASE_ADDR;
  98         else
  99                 mbox_data = T6VF_MBDATA_BASE_ADDR;
 100
 101         /*
 102          * Commands must be multiples of 16 bytes in length and may not be
 103          * larger than the size of the Mailbox Data register array.
 104          */
 105         if ((size % 16) != 0 ||
 106                         size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4)
 107                 return -EINVAL;
 108
 109         /*
 110          * Queue ourselves onto the mailbox access list.  When our entry is at
 111          * the front of the list, we have rights to access the mailbox.  So we
 112          * wait [for a while] till we're at the front [or bail out with an
 113          * EBUSY] ...
 114          */
 115         t4_os_atomic_add_tail(&entry, &adapter->mbox_list, &adapter->mbox_lock);
 116
 117         delay_idx = 0;
 118         ms = delay[0];
 119
 120         for (i = 0; ; i += ms) {
 121                 /*
 122                  * If we've waited too long, return a busy indication.  This
 123                  * really ought to be based on our initial position in the
 124                  * mailbox access list but this is a start.  We very rarely
 125                  * contend on access to the mailbox ...
 126                  */
 127                 if (i > (2 * FW_CMD_MAX_TIMEOUT)) {
 128                         t4_os_atomic_list_del(&entry, &adapter->mbox_list,
 129                                               &adapter->mbox_lock);
 130                         ret = -EBUSY;
 131                         return ret;
 132                 }
 133
 134                 /*
 135                  * If we're at the head, break out and start the mailbox
 136                  * protocol.
 137                  */
 138                 if (t4_os_list_first_entry(&adapter->mbox_list) == &entry)
 139                         break;
 140
 141                 /*
 142                  * Delay for a bit before checking again ...
 143                  */
 144                 if (sleep_ok) {
 145                         ms = delay[delay_idx];  /* last element may repeat */
 146                         if (delay_idx < ARRAY_SIZE(delay) - 1)
 147                                 delay_idx++;
 148                         msleep(ms);
 149                 } else {
 150                         rte_delay_ms(ms);
 151                 }
 152         }
 153
 154         /*
 155          * Loop trying to get ownership of the mailbox.  Return an error
 156          * if we can't gain ownership.
 157          */
 158         v = G_MBOWNER(t4_read_reg(adapter, mbox_ctl));
 159         for (i = 0; v == X_MBOWNER_NONE && i < 3; i++)
 160                 v = G_MBOWNER(t4_read_reg(adapter, mbox_ctl));
 161
 162         if (v != X_MBOWNER_PL) {
 163                 t4_os_atomic_list_del(&entry, &adapter->mbox_list,
 164                                       &adapter->mbox_lock);
 165                 ret = (v == X_MBOWNER_FW) ? -EBUSY : -ETIMEDOUT;
 166                 return ret;
 167         }
 168
 169         /*
 170          * Write the command array into the Mailbox Data register array and
 171          * transfer ownership of the mailbox to the firmware.
 172          */
 173         for (i = 0, p = cmd; i < size; i += 8)
 174                 t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
 175
 176         t4_read_reg(adapter, mbox_data);          /* flush write */
 177         t4_write_reg(adapter, mbox_ctl,
 178                         F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW));
 179         t4_read_reg(adapter, mbox_ctl);          /* flush write */
 180         delay_idx = 0;
 181         ms = delay[0];
 182
 183         /*
 184          * Spin waiting for firmware to acknowledge processing our command.
 185          */
 186         for (i = 0; i < FW_CMD_MAX_TIMEOUT; i++) {
 187                 if (sleep_ok) {
 188                         ms = delay[delay_idx];  /* last element may repeat */
 189                         if (delay_idx < ARRAY_SIZE(delay) - 1)
 190                                 delay_idx++;
 191                         msleep(ms);
 192                 } else {
 193                         rte_delay_ms(ms);
 194                 }
 195
 196                 /*
 197                  * If we're the owner, see if this is the reply we wanted.
 198                  */
 199                 v = t4_read_reg(adapter, mbox_ctl);
 200                 if (G_MBOWNER(v) == X_MBOWNER_PL) {
 201                         /*
 202                          * If the Message Valid bit isn't on, revoke ownership
 203                          * of the mailbox and continue waiting for our reply.
 204                          */
 205                         if ((v & F_MBMSGVALID) == 0) {
 206                                 t4_write_reg(adapter, mbox_ctl,
 207                                              V_MBOWNER(X_MBOWNER_NONE));
 208                                 continue;
 209                         }
 210
 211                         /*
 212                          * We now have our reply.  Extract the command return
 213                          * value, copy the reply back to our caller's buffer
 214                          * (if specified) and revoke ownership of the mailbox.
 215                          * We return the (negated) firmware command return
 216                          * code (this depends on FW_SUCCESS == 0).  (Again we
 217                          * avoid clogging the log with FW_VI_STATS_CMD
 218                          * reply results.)
 219                          */
 220
 221                         /*
 222                          * Retrieve the command reply and release the mailbox.
 223                          */
 224                         get_mbox_rpl(adapter, cmd_rpl, size / 8, mbox_data);
 225                         t4_write_reg(adapter, mbox_ctl,
 226                                      V_MBOWNER(X_MBOWNER_NONE));
 227                         t4_os_atomic_list_del(&entry, &adapter->mbox_list,
 228                                               &adapter->mbox_lock);
 229
 230                         /* return value in high-order host-endian word */
 231                         v = be64_to_cpu(cmd_rpl[0]);
 232
 233                         if (rpl) {
 234                                 /* request bit in high-order BE word */
 235                                 WARN_ON((be32_to_cpu(*(const u32 *)cmd)
 236                                          & F_FW_CMD_REQUEST) == 0);
 237                                 memcpy(rpl, cmd_rpl, size);
 238                         }
 239                         return -((int)G_FW_CMD_RETVAL(v));
 240                 }
 241         }
 242
 243         /*
 244          * We timed out.  Return the error ...
 245          */
 246         dev_err(adapter, "command %#x timed out\n",
 247                 *(const u8 *)cmd);
 248         dev_err(adapter, "    Control = %#x\n", t4_read_reg(adapter, mbox_ctl));
 249         t4_os_atomic_list_del(&entry, &adapter->mbox_list, &adapter->mbox_lock);
 250         ret = -ETIMEDOUT;
 251         return ret;
 252 }
 253
 254 /**
 255  * t4vf_fw_reset - issue a reset to FW
 256  * @adapter: the adapter
 257  *
 258  * Issues a reset command to FW.  For a Physical Function this would
 259  * result in the Firmware resetting all of its state.  For a Virtual
 260  * Function this just resets the state associated with the VF.
 261  */
 262 int t4vf_fw_reset(struct adapter *adapter)
 263 {
 264         struct fw_reset_cmd cmd;
 265
 266         memset(&cmd, 0, sizeof(cmd));
 267         cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_RESET_CMD) |
 268                                       F_FW_CMD_WRITE);
 269         cmd.retval_len16 = cpu_to_be32(V_FW_CMD_LEN16(FW_LEN16(cmd)));
 270         return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
 271 }
 272
 273 /**
 274  * t4vf_prep_adapter - prepare SW and HW for operation
 275  * @adapter: the adapter
 276  *
 277  * Initialize adapter SW state for the various HW modules, set initial
 278  * values for some adapter tunables, take PHYs out of reset, and
 279  * initialize the MDIO interface.
 280  */
 281 int t4vf_prep_adapter(struct adapter *adapter)
 282 {
 283         u32 pl_vf_rev;
 284         int ret, ver;
 285
 286         ret = t4vf_wait_dev_ready(adapter);
 287         if (ret < 0)
 288                 return ret;
 289
 290         /*
 291          * Default port and clock for debugging in case we can't reach
 292          * firmware.
 293          */
 294         adapter->params.nports = 1;
 295         adapter->params.vfres.pmask = 1;
 296         adapter->params.vpd.cclk = 50000;
 297
 298         pl_vf_rev = G_REV(t4_read_reg(adapter, A_PL_VF_REV));
 299         adapter->params.pci.device_id = adapter->pdev->id.device_id;
 300         adapter->params.pci.vendor_id = adapter->pdev->id.vendor_id;
 301
 302         /*
 303          * WE DON'T NEED adapter->params.chip CODE ONCE PL_REV CONTAINS
 304          * ADAPTER (VERSION << 4 | REVISION)
 305          */
 306         ver = CHELSIO_PCI_ID_VER(adapter->params.pci.device_id);
 307         adapter->params.chip = 0;
 308         switch (ver) {
 309         case CHELSIO_T5:
 310                 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5,
 311                                                           pl_vf_rev);
 312                 adapter->params.arch.sge_fl_db = F_DBPRIO | F_DBTYPE;
 313                 adapter->params.arch.mps_tcam_size =
 314                         NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
 315                 break;
 316         case CHELSIO_T6:
 317                 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6,
 318                                                           pl_vf_rev);
 319                 adapter->params.arch.sge_fl_db = 0;
 320                 adapter->params.arch.mps_tcam_size =
 321                         NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
 322                 break;
 323         default:
 324                 dev_err(adapter, "%s: Device %d is not supported\n",
 325                         __func__, adapter->params.pci.device_id);
 326                 return -EINVAL;
 327         }
 328         return 0;
 329 }
 330
 331 /**
 332  * t4vf_query_params - query FW or device parameters
 333  * @adapter: the adapter
 334  * @nparams: the number of parameters
 335  * @params: the parameter names
 336  * @vals: the parameter values
 337  *
 338  * Reads the values of firmware or device parameters.  Up to 7 parameters
 339  * can be queried at once.
 340  */
 341 int t4vf_query_params(struct adapter *adapter, unsigned int nparams,
 342                       const u32 *params, u32 *vals)
 343 {
 344         struct fw_params_cmd cmd, rpl;
 345         struct fw_params_param *p;
 346         unsigned int i;
 347         size_t len16;
 348         int ret;
 349
 350         if (nparams > 7)
 351                 return -EINVAL;
 352
 353         memset(&cmd, 0, sizeof(cmd));
 354         cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
 355                                     F_FW_CMD_REQUEST |
 356                                     F_FW_CMD_READ);
 357         len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
 358                              param[nparams]), 16);
 359         cmd.retval_len16 = cpu_to_be32(V_FW_CMD_LEN16(len16));
 360         for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++)
 361                 p->mnem = cpu_to_be32(*params++);
 362         ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
 363         if (ret == 0)
 364                 for (i = 0, p = &rpl.param[0]; i < nparams; i++, p++)
 365                         *vals++ = be32_to_cpu(p->val);
 366         return ret;
 367 }
 368
 369 /**
 370  * t4vf_get_vpd_params - retrieve device VPD paremeters
 371  * @adapter: the adapter
 372  *
 373  * Retrives various device Vital Product Data parameters.  The parameters
 374  * are stored in @adapter->params.vpd.
 375  */
 376 int t4vf_get_vpd_params(struct adapter *adapter)
 377 {
 378         struct vpd_params *vpd_params = &adapter->params.vpd;
 379         u32 params[7], vals[7];
 380         int v;
 381
 382         params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
 383                      V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
 384         v = t4vf_query_params(adapter, 1, params, vals);
 385         if (v != FW_SUCCESS)
 386                 return v;
 387         vpd_params->cclk = vals[0];
 388         dev_debug(adapter, "%s: vpd_params->cclk = %u\n",
 389                   __func__, vpd_params->cclk);
 390         return 0;
 391 }
 392
 393 /**
 394  * t4vf_get_dev_params - retrieve device paremeters
 395  * @adapter: the adapter
 396  *
 397  * Retrives fw and tp version.
 398  */
 399 int t4vf_get_dev_params(struct adapter *adapter)
 400 {
 401         u32 params[7], vals[7];
 402         int v;
 403
 404         params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
 405                      V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FWREV));
 406         params[1] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
 407                      V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_TPREV));
 408         v = t4vf_query_params(adapter, 2, params, vals);
 409         if (v != FW_SUCCESS)
 410                 return v;
 411         adapter->params.fw_vers = vals[0];
 412         adapter->params.tp_vers = vals[1];
 413
 414         dev_info(adapter, "Firmware version: %u.%u.%u.%u\n",
 415                  G_FW_HDR_FW_VER_MAJOR(adapter->params.fw_vers),
 416                  G_FW_HDR_FW_VER_MINOR(adapter->params.fw_vers),
 417                  G_FW_HDR_FW_VER_MICRO(adapter->params.fw_vers),
 418                  G_FW_HDR_FW_VER_BUILD(adapter->params.fw_vers));
 419
 420         dev_info(adapter, "TP Microcode version: %u.%u.%u.%u\n",
 421                  G_FW_HDR_FW_VER_MAJOR(adapter->params.tp_vers),
 422                  G_FW_HDR_FW_VER_MINOR(adapter->params.tp_vers),
 423                  G_FW_HDR_FW_VER_MICRO(adapter->params.tp_vers),
 424                  G_FW_HDR_FW_VER_BUILD(adapter->params.tp_vers));
 425         return 0;
 426 }
 427
 428 /**
 429  * t4vf_set_params - sets FW or device parameters
 430  * @adapter: the adapter
 431  * @nparams: the number of parameters
 432  * @params: the parameter names
 433  * @vals: the parameter values
 434  *
 435  * Sets the values of firmware or device parameters.  Up to 7 parameters
 436  * can be specified at once.
 437  */
 438 int t4vf_set_params(struct adapter *adapter, unsigned int nparams,
 439                     const u32 *params, const u32 *vals)
 440 {
 441         struct fw_params_param *p;
 442         struct fw_params_cmd cmd;
 443         unsigned int i;
 444         size_t len16;
 445
 446         if (nparams > 7)
 447                 return -EINVAL;
 448
 449         memset(&cmd, 0, sizeof(cmd));
 450         cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
 451                                     F_FW_CMD_REQUEST |
 452                                     F_FW_CMD_WRITE);
 453         len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd,
 454                              param[nparams]), 16);
 455         cmd.retval_len16 = cpu_to_be32(V_FW_CMD_LEN16(len16));
 456         for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) {
 457                 p->mnem = cpu_to_be32(*params++);
 458                 p->val = cpu_to_be32(*vals++);
 459         }
 460         return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
 461 }
 462
 463 /**
 464  * t4vf_fl_pkt_align - return the fl packet alignment
 465  * @adapter: the adapter
 466  *
 467  * T4 has a single field to specify the packing and padding boundary.
 468  * T5 onwards has separate fields for this and hence the alignment for
 469  * next packet offset is maximum of these two.
 470  */
 471 int t4vf_fl_pkt_align(struct adapter *adapter, u32 sge_control,
 472                       u32 sge_control2)
 473 {
 474         unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
 475
 476         /* T4 uses a single control field to specify both the PCIe Padding and
 477          * Packing Boundary.  T5 introduced the ability to specify these
 478          * separately.  The actual Ingress Packet Data alignment boundary
 479          * within Packed Buffer Mode is the maximum of these two
 480          * specifications.
 481          */
 482         if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
 483                 ingpad_shift = X_INGPADBOUNDARY_SHIFT;
 484         else
 485                 ingpad_shift = X_T6_INGPADBOUNDARY_SHIFT;
 486
 487         ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) + ingpad_shift);
 488
 489         fl_align = ingpadboundary;
 490         if (!is_t4(adapter->params.chip)) {
 491                 ingpackboundary = G_INGPACKBOUNDARY(sge_control2);
 492                 if (ingpackboundary == X_INGPACKBOUNDARY_16B)
 493                         ingpackboundary = 16;
 494                 else
 495                         ingpackboundary = 1 << (ingpackboundary +
 496                                         X_INGPACKBOUNDARY_SHIFT);
 497
 498                 fl_align = max(ingpadboundary, ingpackboundary);
 499         }
 500         return fl_align;
 501 }
 502
 503 unsigned int t4vf_get_pf_from_vf(struct adapter *adapter)
 504 {
 505         u32 whoami;
 506
 507         whoami = t4_read_reg(adapter, T4VF_PL_BASE_ADDR + A_PL_VF_WHOAMI);
 508         return (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
 509                         G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami));
 510 }
 511
 512 /**
 513  * t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration
 514  * @adapter: the adapter
 515  *
 516  * Retrieves global RSS mode and parameters with which we have to live
 517  * and stores them in the @adapter's RSS parameters.
 518  */
 519 int t4vf_get_rss_glb_config(struct adapter *adapter)
 520 {
 521         struct rss_params *rss = &adapter->params.rss;
 522         struct fw_rss_glb_config_cmd cmd, rpl;
 523         int v;
 524
 525         /*
 526          * Execute an RSS Global Configuration read command to retrieve
 527          * our RSS configuration.
 528          */
 529         memset(&cmd, 0, sizeof(cmd));
 530         cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
 531                                       F_FW_CMD_REQUEST |
 532                                       F_FW_CMD_READ);
 533         cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
 534         v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
 535         if (v != FW_SUCCESS)
 536                 return v;
 537
 538         /*
 539          * Translate the big-endian RSS Global Configuration into our
 540          * cpu-endian format based on the RSS mode.  We also do first level
 541          * filtering at this point to weed out modes which don't support
 542          * VF Drivers ...
 543          */
 544         rss->mode = G_FW_RSS_GLB_CONFIG_CMD_MODE
 545                         (be32_to_cpu(rpl.u.manual.mode_pkd));
 546         switch (rss->mode) {
 547         case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: {
 548                 u32 word = be32_to_cpu
 549                                 (rpl.u.basicvirtual.synmapen_to_hashtoeplitz);
 550
 551                 rss->u.basicvirtual.synmapen =
 552                         ((word & F_FW_RSS_GLB_CONFIG_CMD_SYNMAPEN) != 0);
 553                 rss->u.basicvirtual.syn4tupenipv6 =
 554                         ((word & F_FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6) != 0);
 555                 rss->u.basicvirtual.syn2tupenipv6 =
 556                         ((word & F_FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6) != 0);
 557                 rss->u.basicvirtual.syn4tupenipv4 =
 558                         ((word & F_FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4) != 0);
 559                 rss->u.basicvirtual.syn2tupenipv4 =
 560                         ((word & F_FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4) != 0);
 561                 rss->u.basicvirtual.ofdmapen =
 562                         ((word & F_FW_RSS_GLB_CONFIG_CMD_OFDMAPEN) != 0);
 563                 rss->u.basicvirtual.tnlmapen =
 564                         ((word & F_FW_RSS_GLB_CONFIG_CMD_TNLMAPEN) != 0);
 565                 rss->u.basicvirtual.tnlalllookup =
 566                         ((word  & F_FW_RSS_GLB_CONFIG_CMD_TNLALLLKP) != 0);
 567                 rss->u.basicvirtual.hashtoeplitz =
 568                         ((word & F_FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ) != 0);
 569
 570                 /* we need at least Tunnel Map Enable to be set */
 571                 if (!rss->u.basicvirtual.tnlmapen)
 572                         return -EINVAL;
 573                 break;
 574         }
 575
 576         default:
 577                 /* all unknown/unsupported RSS modes result in an error */
 578                 return -EINVAL;
 579         }
 580         return 0;
 581 }
 582
 583 /**
 584  * t4vf_get_vfres - retrieve VF resource limits
 585  * @adapter: the adapter
 586  *
 587  * Retrieves configured resource limits and capabilities for a virtual
 588  * function.  The results are stored in @adapter->vfres.
 589  */
 590 int t4vf_get_vfres(struct adapter *adapter)
 591 {
 592         struct vf_resources *vfres = &adapter->params.vfres;
 593         struct fw_pfvf_cmd cmd, rpl;
 594         u32 word;
 595         int v;
 596
 597         /*
 598          * Execute PFVF Read command to get VF resource limits; bail out early
 599          * with error on command failure.
 600          */
 601         memset(&cmd, 0, sizeof(cmd));
 602         cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) |
 603                                     F_FW_CMD_REQUEST |
 604                                     F_FW_CMD_READ);
 605         cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
 606         v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
 607         if (v != FW_SUCCESS)
 608                 return v;
 609
 610         /*
 611          * Extract VF resource limits and return success.
 612          */
 613         word = be32_to_cpu(rpl.niqflint_niq);
 614         vfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word);
 615         vfres->niq = G_FW_PFVF_CMD_NIQ(word);
 616
 617         word = be32_to_cpu(rpl.type_to_neq);
 618         vfres->neq = G_FW_PFVF_CMD_NEQ(word);
 619         vfres->pmask = G_FW_PFVF_CMD_PMASK(word);
 620
 621         word = be32_to_cpu(rpl.tc_to_nexactf);
 622         vfres->tc = G_FW_PFVF_CMD_TC(word);
 623         vfres->nvi = G_FW_PFVF_CMD_NVI(word);
 624         vfres->nexactf = G_FW_PFVF_CMD_NEXACTF(word);
 625
 626         word = be32_to_cpu(rpl.r_caps_to_nethctrl);
 627         vfres->r_caps = G_FW_PFVF_CMD_R_CAPS(word);
 628         vfres->wx_caps = G_FW_PFVF_CMD_WX_CAPS(word);
 629         vfres->nethctrl = G_FW_PFVF_CMD_NETHCTRL(word);
 630         return 0;
 631 }
 632
 633 static int t4vf_alloc_vi(struct adapter *adapter, int port_id)
 634 {
 635         struct fw_vi_cmd cmd, rpl;
 636         int v;
 637
 638         /*
 639          * Execute a VI command to allocate Virtual Interface and return its
 640          * VIID.
 641          */
 642         memset(&cmd, 0, sizeof(cmd));
 643         cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) |
 644                                     F_FW_CMD_REQUEST |
 645                                     F_FW_CMD_WRITE |
 646                                     F_FW_CMD_EXEC);
 647         cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) |
 648                                          F_FW_VI_CMD_ALLOC);
 649         cmd.portid_pkd = V_FW_VI_CMD_PORTID(port_id);
 650         v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl);
 651         if (v != FW_SUCCESS)
 652                 return v;
 653         return G_FW_VI_CMD_VIID(be16_to_cpu(rpl.type_to_viid));
 654 }
 655
 656 int t4vf_port_init(struct adapter *adapter)
 657 {
 658         unsigned int fw_caps = adapter->params.fw_caps_support;
 659         struct fw_port_cmd port_cmd, port_rpl;
 660         struct fw_vi_cmd vi_cmd, vi_rpl;
 661         fw_port_cap32_t pcaps, acaps;
 662         enum fw_port_type port_type;
 663         int mdio_addr;
 664         int ret, i;
 665
 666         for_each_port(adapter, i) {
 667                 struct port_info *p = adap2pinfo(adapter, i);
 668
 669                 /*
 670                  * If we haven't yet determined if we're talking to Firmware
 671                  * which knows the new 32-bit Port Caps, it's time to find
 672                  * out now.  This will also tell new Firmware to send us Port
 673                  * Status Updates using the new 32-bit Port Capabilities
 674                  * version of the Port Information message.
 675                  */
 676                 if (fw_caps == FW_CAPS_UNKNOWN) {
 677                         u32 param, val;
 678
 679                         param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
 680                                  V_FW_PARAMS_PARAM_X
 681                                          (FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
 682                         val = 1;
 683                         ret = t4vf_set_params(adapter, 1, &param, &val);
 684                         fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
 685                         adapter->params.fw_caps_support = fw_caps;
 686                 }
 687
 688                 ret = t4vf_alloc_vi(adapter, p->port_id);
 689                 if (ret < 0) {
 690                         dev_err(&pdev->dev, "cannot allocate VI for port %d:"
 691                                 " err=%d\n", p->port_id, ret);
 692                         return ret;
 693                 }
 694                 p->viid = ret;
 695
 696                 /*
 697                  * Execute a VI Read command to get our Virtual Interface
 698                  * information like MAC address, etc.
 699                  */
 700                 memset(&vi_cmd, 0, sizeof(vi_cmd));
 701                 vi_cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) |
 702                                                F_FW_CMD_REQUEST |
 703                                                F_FW_CMD_READ);
 704                 vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd));
 705                 vi_cmd.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(p->viid));
 706                 ret = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl);
 707                 if (ret != FW_SUCCESS)
 708                         return ret;
 709
 710                 p->rss_size = G_FW_VI_CMD_RSSSIZE
 711                                 (be16_to_cpu(vi_rpl.norss_rsssize));
 712                 t4_os_set_hw_addr(adapter, i, vi_rpl.mac);
 713
 714                 /*
 715                  * If we don't have read access to our port information, we're
 716                  * done now.  Else, execute a PORT Read command to get it ...
 717                  */
 718                 if (!(adapter->params.vfres.r_caps & FW_CMD_CAP_PORT))
 719                         return 0;
 720
 721                 memset(&port_cmd, 0, sizeof(port_cmd));
 722                 port_cmd.op_to_portid = cpu_to_be32
 723                                 (V_FW_CMD_OP(FW_PORT_CMD) | F_FW_CMD_REQUEST |
 724                                 F_FW_CMD_READ |
 725                                 V_FW_PORT_CMD_PORTID(p->port_id));
 726                 port_cmd.action_to_len16 = cpu_to_be32
 727                                 (V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ?
 728                                         FW_PORT_ACTION_GET_PORT_INFO :
 729                                         FW_PORT_ACTION_GET_PORT_INFO32) |
 730                                         FW_LEN16(port_cmd));
 731                 ret = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd),
 732                                    &port_rpl);
 733                 if (ret != FW_SUCCESS)
 734                         return ret;
 735
 736                 /*
 737                  * Extract the various fields from the Port Information message.
 738                  */
 739                 if (fw_caps == FW_CAPS16) {
 740                         u32 lstatus = be32_to_cpu
 741                                         (port_rpl.u.info.lstatus_to_modtype);
 742
 743                         port_type = G_FW_PORT_CMD_PTYPE(lstatus);
 744                         mdio_addr = ((lstatus & F_FW_PORT_CMD_MDIOCAP) ?
 745                                       (int)G_FW_PORT_CMD_MDIOADDR(lstatus) :
 746                                       -1);
 747                         pcaps = fwcaps16_to_caps32
 748                                         (be16_to_cpu(port_rpl.u.info.pcap));
 749                         acaps = fwcaps16_to_caps32
 750                                         (be16_to_cpu(port_rpl.u.info.acap));
 751                 } else {
 752                         u32 lstatus32 = be32_to_cpu
 753                                 (port_rpl.u.info32.lstatus32_to_cbllen32);
 754
 755                         port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
 756                         mdio_addr = ((lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
 757                                       (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) :
 758                                       -1);
 759                         pcaps = be32_to_cpu(port_rpl.u.info32.pcaps32);
 760                         acaps = be32_to_cpu(port_rpl.u.info32.acaps32);
 761                 }
 762
 763                 p->port_type = port_type;
 764                 p->mdio_addr = mdio_addr;
 765                 p->mod_type = FW_PORT_MOD_TYPE_NA;
 766                 init_link_config(&p->link_cfg, pcaps, acaps);
 767         }
 768         return 0;
 769 }