1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2015 6WIND S.A.
3 * Copyright 2015 Mellanox Technologies, Ltd
16 #include <linux/netlink.h>
17 #include <linux/rtnetlink.h>
20 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
22 #pragma GCC diagnostic ignored "-Wpedantic"
24 #include <infiniband/verbs.h>
26 #pragma GCC diagnostic error "-Wpedantic"
29 #include <rte_malloc.h>
30 #include <rte_ethdev_driver.h>
31 #include <rte_ethdev_pci.h>
33 #include <rte_bus_pci.h>
34 #include <rte_common.h>
35 #include <rte_config.h>
36 #include <rte_eal_memconfig.h>
37 #include <rte_kvargs.h>
38 #include <rte_rwlock.h>
39 #include <rte_spinlock.h>
40 #include <rte_string_fns.h>
43 #include "mlx5_utils.h"
44 #include "mlx5_rxtx.h"
45 #include "mlx5_autoconf.h"
46 #include "mlx5_defs.h"
47 #include "mlx5_glue.h"
50 /* Device parameter to enable RX completion queue compression. */
51 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
53 /* Device parameter to enable Multi-Packet Rx queue. */
54 #define MLX5_RX_MPRQ_EN "mprq_en"
56 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
57 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
59 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
60 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
62 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
63 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
65 /* Device parameter to configure inline send. */
66 #define MLX5_TXQ_INLINE "txq_inline"
69 * Device parameter to configure the number of TX queues threshold for
70 * enabling inline send.
72 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
74 /* Device parameter to enable multi-packet send WQEs. */
75 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
77 /* Device parameter to include 2 dsegs in the title WQEBB. */
78 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
80 /* Device parameter to limit the size of inlining packet. */
81 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
83 /* Device parameter to enable hardware Tx vector. */
84 #define MLX5_TX_VEC_EN "tx_vec_en"
86 /* Device parameter to enable hardware Rx vector. */
87 #define MLX5_RX_VEC_EN "rx_vec_en"
89 /* Allow L3 VXLAN flow creation. */
90 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
92 /* Activate Netlink support in VF mode. */
93 #define MLX5_VF_NL_EN "vf_nl_en"
95 /* Select port representors to instantiate. */
96 #define MLX5_REPRESENTOR "representor"
98 #ifndef HAVE_IBV_MLX5_MOD_MPW
99 #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
100 #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
103 #ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP
104 #define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
107 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
109 /* Shared memory between primary and secondary processes. */
110 struct mlx5_shared_data *mlx5_shared_data;
112 /* Spinlock for mlx5_shared_data allocation. */
113 static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
115 /** Driver-specific log messages type. */
119 * Prepare shared data between primary and secondary process.
122 mlx5_prepare_shared_data(void)
124 const struct rte_memzone *mz;
126 rte_spinlock_lock(&mlx5_shared_data_lock);
127 if (mlx5_shared_data == NULL) {
128 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
129 /* Allocate shared memory. */
130 mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
131 sizeof(*mlx5_shared_data),
134 /* Lookup allocated shared memory. */
135 mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
138 rte_panic("Cannot allocate mlx5 shared data\n");
139 mlx5_shared_data = mz->addr;
140 /* Initialize shared data. */
141 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
142 LIST_INIT(&mlx5_shared_data->mem_event_cb_list);
143 rte_rwlock_init(&mlx5_shared_data->mem_event_rwlock);
145 rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
146 mlx5_mr_mem_event_cb, NULL);
148 rte_spinlock_unlock(&mlx5_shared_data_lock);
152 * Retrieve integer value from environment variable.
155 * Environment variable name.
158 * Integer value, 0 if the variable is not set.
161 mlx5_getenv_int(const char *name)
163 const char *val = getenv(name);
171 * Verbs callback to allocate a memory. This function should allocate the space
172 * according to the size provided residing inside a huge page.
173 * Please note that all allocation must respect the alignment from libmlx5
174 * (i.e. currently sysconf(_SC_PAGESIZE)).
177 * The size in bytes of the memory to allocate.
179 * A pointer to the callback data.
182 * Allocated buffer, NULL otherwise and rte_errno is set.
185 mlx5_alloc_verbs_buf(size_t size, void *data)
187 struct priv *priv = data;
189 size_t alignment = sysconf(_SC_PAGESIZE);
190 unsigned int socket = SOCKET_ID_ANY;
192 if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
193 const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
195 socket = ctrl->socket;
196 } else if (priv->verbs_alloc_ctx.type ==
197 MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
198 const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
200 socket = ctrl->socket;
202 assert(data != NULL);
203 ret = rte_malloc_socket(__func__, size, alignment, socket);
210 * Verbs callback to free a memory.
213 * A pointer to the memory to free.
215 * A pointer to the callback data.
218 mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
220 assert(data != NULL);
225 * DPDK callback to close the device.
227 * Destroy all queues and objects, free memory.
230 * Pointer to Ethernet device structure.
233 mlx5_dev_close(struct rte_eth_dev *dev)
235 struct priv *priv = dev->data->dev_private;
239 DRV_LOG(DEBUG, "port %u closing device \"%s\"",
241 ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
242 /* In case mlx5_dev_stop() has not been called. */
243 mlx5_dev_interrupt_handler_uninstall(dev);
244 mlx5_traffic_disable(dev);
245 mlx5_flow_flush(dev, NULL);
246 /* Prevent crashes when queues are still in use. */
247 dev->rx_pkt_burst = removed_rx_burst;
248 dev->tx_pkt_burst = removed_tx_burst;
249 if (priv->rxqs != NULL) {
250 /* XXX race condition if mlx5_rx_burst() is still running. */
252 for (i = 0; (i != priv->rxqs_n); ++i)
253 mlx5_rxq_release(dev, i);
257 if (priv->txqs != NULL) {
258 /* XXX race condition if mlx5_tx_burst() is still running. */
260 for (i = 0; (i != priv->txqs_n); ++i)
261 mlx5_txq_release(dev, i);
265 mlx5_mprq_free_mp(dev);
266 mlx5_mr_release(dev);
267 if (priv->pd != NULL) {
268 assert(priv->ctx != NULL);
269 claim_zero(mlx5_glue->dealloc_pd(priv->pd));
270 claim_zero(mlx5_glue->close_device(priv->ctx));
272 assert(priv->ctx == NULL);
273 if (priv->rss_conf.rss_key != NULL)
274 rte_free(priv->rss_conf.rss_key);
275 if (priv->reta_idx != NULL)
276 rte_free(priv->reta_idx);
277 if (priv->primary_socket)
278 mlx5_socket_uninit(dev);
280 mlx5_nl_mac_addr_flush(dev);
281 if (priv->nl_socket_route >= 0)
282 close(priv->nl_socket_route);
283 if (priv->nl_socket_rdma >= 0)
284 close(priv->nl_socket_rdma);
285 if (priv->mnl_socket)
286 mlx5_nl_flow_socket_destroy(priv->mnl_socket);
287 ret = mlx5_hrxq_ibv_verify(dev);
289 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
291 ret = mlx5_ind_table_ibv_verify(dev);
293 DRV_LOG(WARNING, "port %u some indirection table still remain",
295 ret = mlx5_rxq_ibv_verify(dev);
297 DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain",
299 ret = mlx5_rxq_verify(dev);
301 DRV_LOG(WARNING, "port %u some Rx queues still remain",
303 ret = mlx5_txq_ibv_verify(dev);
305 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
307 ret = mlx5_txq_verify(dev);
309 DRV_LOG(WARNING, "port %u some Tx queues still remain",
311 ret = mlx5_flow_verify(dev);
313 DRV_LOG(WARNING, "port %u some flows still remain",
315 if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
317 unsigned int i = mlx5_dev_to_port_id(dev->device, NULL, 0);
320 i = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, i), i);
323 rte_eth_devices[port_id[i]].data->dev_private;
326 opriv->domain_id != priv->domain_id ||
327 &rte_eth_devices[port_id[i]] == dev)
332 claim_zero(rte_eth_switch_domain_free(priv->domain_id));
334 memset(priv, 0, sizeof(*priv));
335 priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
338 const struct eth_dev_ops mlx5_dev_ops = {
339 .dev_configure = mlx5_dev_configure,
340 .dev_start = mlx5_dev_start,
341 .dev_stop = mlx5_dev_stop,
342 .dev_set_link_down = mlx5_set_link_down,
343 .dev_set_link_up = mlx5_set_link_up,
344 .dev_close = mlx5_dev_close,
345 .promiscuous_enable = mlx5_promiscuous_enable,
346 .promiscuous_disable = mlx5_promiscuous_disable,
347 .allmulticast_enable = mlx5_allmulticast_enable,
348 .allmulticast_disable = mlx5_allmulticast_disable,
349 .link_update = mlx5_link_update,
350 .stats_get = mlx5_stats_get,
351 .stats_reset = mlx5_stats_reset,
352 .xstats_get = mlx5_xstats_get,
353 .xstats_reset = mlx5_xstats_reset,
354 .xstats_get_names = mlx5_xstats_get_names,
355 .dev_infos_get = mlx5_dev_infos_get,
356 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
357 .vlan_filter_set = mlx5_vlan_filter_set,
358 .rx_queue_setup = mlx5_rx_queue_setup,
359 .tx_queue_setup = mlx5_tx_queue_setup,
360 .rx_queue_release = mlx5_rx_queue_release,
361 .tx_queue_release = mlx5_tx_queue_release,
362 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
363 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
364 .mac_addr_remove = mlx5_mac_addr_remove,
365 .mac_addr_add = mlx5_mac_addr_add,
366 .mac_addr_set = mlx5_mac_addr_set,
367 .set_mc_addr_list = mlx5_set_mc_addr_list,
368 .mtu_set = mlx5_dev_set_mtu,
369 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
370 .vlan_offload_set = mlx5_vlan_offload_set,
371 .reta_update = mlx5_dev_rss_reta_update,
372 .reta_query = mlx5_dev_rss_reta_query,
373 .rss_hash_update = mlx5_rss_hash_update,
374 .rss_hash_conf_get = mlx5_rss_hash_conf_get,
375 .filter_ctrl = mlx5_dev_filter_ctrl,
376 .rx_descriptor_status = mlx5_rx_descriptor_status,
377 .tx_descriptor_status = mlx5_tx_descriptor_status,
378 .rx_queue_intr_enable = mlx5_rx_intr_enable,
379 .rx_queue_intr_disable = mlx5_rx_intr_disable,
380 .is_removed = mlx5_is_removed,
383 static const struct eth_dev_ops mlx5_dev_sec_ops = {
384 .stats_get = mlx5_stats_get,
385 .stats_reset = mlx5_stats_reset,
386 .xstats_get = mlx5_xstats_get,
387 .xstats_reset = mlx5_xstats_reset,
388 .xstats_get_names = mlx5_xstats_get_names,
389 .dev_infos_get = mlx5_dev_infos_get,
390 .rx_descriptor_status = mlx5_rx_descriptor_status,
391 .tx_descriptor_status = mlx5_tx_descriptor_status,
394 /* Available operators in flow isolated mode. */
395 const struct eth_dev_ops mlx5_dev_ops_isolate = {
396 .dev_configure = mlx5_dev_configure,
397 .dev_start = mlx5_dev_start,
398 .dev_stop = mlx5_dev_stop,
399 .dev_set_link_down = mlx5_set_link_down,
400 .dev_set_link_up = mlx5_set_link_up,
401 .dev_close = mlx5_dev_close,
402 .promiscuous_enable = mlx5_promiscuous_enable,
403 .promiscuous_disable = mlx5_promiscuous_disable,
404 .allmulticast_enable = mlx5_allmulticast_enable,
405 .allmulticast_disable = mlx5_allmulticast_disable,
406 .link_update = mlx5_link_update,
407 .stats_get = mlx5_stats_get,
408 .stats_reset = mlx5_stats_reset,
409 .xstats_get = mlx5_xstats_get,
410 .xstats_reset = mlx5_xstats_reset,
411 .xstats_get_names = mlx5_xstats_get_names,
412 .dev_infos_get = mlx5_dev_infos_get,
413 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
414 .vlan_filter_set = mlx5_vlan_filter_set,
415 .rx_queue_setup = mlx5_rx_queue_setup,
416 .tx_queue_setup = mlx5_tx_queue_setup,
417 .rx_queue_release = mlx5_rx_queue_release,
418 .tx_queue_release = mlx5_tx_queue_release,
419 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
420 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
421 .mac_addr_remove = mlx5_mac_addr_remove,
422 .mac_addr_add = mlx5_mac_addr_add,
423 .mac_addr_set = mlx5_mac_addr_set,
424 .set_mc_addr_list = mlx5_set_mc_addr_list,
425 .mtu_set = mlx5_dev_set_mtu,
426 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
427 .vlan_offload_set = mlx5_vlan_offload_set,
428 .filter_ctrl = mlx5_dev_filter_ctrl,
429 .rx_descriptor_status = mlx5_rx_descriptor_status,
430 .tx_descriptor_status = mlx5_tx_descriptor_status,
431 .rx_queue_intr_enable = mlx5_rx_intr_enable,
432 .rx_queue_intr_disable = mlx5_rx_intr_disable,
433 .is_removed = mlx5_is_removed,
437 * Verify and store value for device argument.
440 * Key argument to verify.
442 * Value associated with key.
447 * 0 on success, a negative errno value otherwise and rte_errno is set.
450 mlx5_args_check(const char *key, const char *val, void *opaque)
452 struct mlx5_dev_config *config = opaque;
455 /* No-op, port representors are processed in mlx5_dev_spawn(). */
456 if (!strcmp(MLX5_REPRESENTOR, key))
459 tmp = strtoul(val, NULL, 0);
462 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
465 if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
466 config->cqe_comp = !!tmp;
467 } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
468 config->mprq.enabled = !!tmp;
469 } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
470 config->mprq.stride_num_n = tmp;
471 } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
472 config->mprq.max_memcpy_len = tmp;
473 } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
474 config->mprq.min_rxqs_num = tmp;
475 } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
476 config->txq_inline = tmp;
477 } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
478 config->txqs_inline = tmp;
479 } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
481 } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
482 config->mpw_hdr_dseg = !!tmp;
483 } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
484 config->inline_max_packet_sz = tmp;
485 } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
486 config->tx_vec_en = !!tmp;
487 } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
488 config->rx_vec_en = !!tmp;
489 } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
490 config->l3_vxlan_en = !!tmp;
491 } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
492 config->vf_nl_en = !!tmp;
494 DRV_LOG(WARNING, "%s: unknown parameter", key);
502 * Parse device parameters.
505 * Pointer to device configuration structure.
507 * Device arguments structure.
510 * 0 on success, a negative errno value otherwise and rte_errno is set.
513 mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
515 const char **params = (const char *[]){
516 MLX5_RXQ_CQE_COMP_EN,
518 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
519 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
522 MLX5_TXQS_MIN_INLINE,
524 MLX5_TXQ_MPW_HDR_DSEG_EN,
525 MLX5_TXQ_MAX_INLINE_LEN,
533 struct rte_kvargs *kvlist;
539 /* Following UGLY cast is done to pass checkpatch. */
540 kvlist = rte_kvargs_parse(devargs->args, params);
543 /* Process parameters. */
544 for (i = 0; (params[i] != NULL); ++i) {
545 if (rte_kvargs_count(kvlist, params[i])) {
546 ret = rte_kvargs_process(kvlist, params[i],
547 mlx5_args_check, config);
550 rte_kvargs_free(kvlist);
555 rte_kvargs_free(kvlist);
559 static struct rte_pci_driver mlx5_driver;
562 * Reserved UAR address space for TXQ UAR(hw doorbell) mapping, process
563 * local resource used by both primary and secondary to avoid duplicate
565 * The space has to be available on both primary and secondary process,
566 * TXQ UAR maps to this area using fixed mmap w/o double check.
568 static void *uar_base;
571 find_lower_va_bound(const struct rte_memseg_list *msl __rte_unused,
572 const struct rte_memseg *ms, void *arg)
579 *addr = RTE_MIN(*addr, ms->addr);
585 * Reserve UAR address space for primary process.
588 * Pointer to Ethernet device.
591 * 0 on success, a negative errno value otherwise and rte_errno is set.
594 mlx5_uar_init_primary(struct rte_eth_dev *dev)
596 struct priv *priv = dev->data->dev_private;
597 void *addr = (void *)0;
599 if (uar_base) { /* UAR address space mapped. */
600 priv->uar_base = uar_base;
603 /* find out lower bound of hugepage segments */
604 rte_memseg_walk(find_lower_va_bound, &addr);
606 /* keep distance to hugepages to minimize potential conflicts. */
607 addr = RTE_PTR_SUB(addr, (uintptr_t)(MLX5_UAR_OFFSET + MLX5_UAR_SIZE));
608 /* anonymous mmap, no real memory consumption. */
609 addr = mmap(addr, MLX5_UAR_SIZE,
610 PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
611 if (addr == MAP_FAILED) {
613 "port %u failed to reserve UAR address space, please"
614 " adjust MLX5_UAR_SIZE or try --base-virtaddr",
619 /* Accept either same addr or a new addr returned from mmap if target
622 DRV_LOG(INFO, "port %u reserved UAR address space: %p",
623 dev->data->port_id, addr);
624 priv->uar_base = addr; /* for primary and secondary UAR re-mmap. */
625 uar_base = addr; /* process local, don't reserve again. */
630 * Reserve UAR address space for secondary process, align with
634 * Pointer to Ethernet device.
637 * 0 on success, a negative errno value otherwise and rte_errno is set.
640 mlx5_uar_init_secondary(struct rte_eth_dev *dev)
642 struct priv *priv = dev->data->dev_private;
645 assert(priv->uar_base);
646 if (uar_base) { /* already reserved. */
647 assert(uar_base == priv->uar_base);
650 /* anonymous mmap, no real memory consumption. */
651 addr = mmap(priv->uar_base, MLX5_UAR_SIZE,
652 PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
653 if (addr == MAP_FAILED) {
654 DRV_LOG(ERR, "port %u UAR mmap failed: %p size: %llu",
655 dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
659 if (priv->uar_base != addr) {
661 "port %u UAR address %p size %llu occupied, please"
662 " adjust MLX5_UAR_OFFSET or try EAL parameter"
664 dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
668 uar_base = addr; /* process local, don't reserve again */
669 DRV_LOG(INFO, "port %u reserved UAR address space: %p",
670 dev->data->port_id, addr);
675 * Spawn an Ethernet device from Verbs information.
678 * Backing DPDK device.
682 * If nonzero, enable VF-specific features.
683 * @param[in] switch_info
684 * Switch properties of Ethernet device.
687 * A valid Ethernet device object on success, NULL otherwise and rte_errno
688 * is set. The following error is defined:
690 * EBUSY: device is not supposed to be spawned.
692 static struct rte_eth_dev *
693 mlx5_dev_spawn(struct rte_device *dpdk_dev,
694 struct ibv_device *ibv_dev,
696 const struct mlx5_switch_info *switch_info)
698 struct ibv_context *ctx;
699 struct ibv_device_attr_ex attr;
700 struct ibv_port_attr port_attr;
701 struct ibv_pd *pd = NULL;
702 struct mlx5dv_context dv_attr = { .comp_mask = 0 };
703 struct mlx5_dev_config config = {
705 .mps = MLX5_ARG_UNSET,
709 .txq_inline = MLX5_ARG_UNSET,
710 .txqs_inline = MLX5_ARG_UNSET,
711 .inline_max_packet_sz = MLX5_ARG_UNSET,
715 .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
716 .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
717 .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
720 struct rte_eth_dev *eth_dev = NULL;
721 struct priv *priv = NULL;
724 unsigned int cqe_comp;
725 unsigned int tunnel_en = 0;
726 unsigned int mpls_en = 0;
727 unsigned int swp = 0;
728 unsigned int mprq = 0;
729 unsigned int mprq_min_stride_size_n = 0;
730 unsigned int mprq_max_stride_size_n = 0;
731 unsigned int mprq_min_stride_num_n = 0;
732 unsigned int mprq_max_stride_num_n = 0;
733 #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
734 struct ibv_counter_set_description cs_desc = { .counter_type = 0 };
736 struct ether_addr mac;
737 char name[RTE_ETH_NAME_MAX_LEN];
738 int own_domain_id = 0;
741 /* Determine if this port representor is supposed to be spawned. */
742 if (switch_info->representor && dpdk_dev->devargs) {
743 struct rte_eth_devargs eth_da;
745 err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da);
748 DRV_LOG(ERR, "failed to process device arguments: %s",
749 strerror(rte_errno));
752 for (i = 0; i < eth_da.nb_representor_ports; ++i)
753 if (eth_da.representor_ports[i] ==
754 (uint16_t)switch_info->port_name)
756 if (i == eth_da.nb_representor_ports) {
761 /* Prepare shared data between primary and secondary process. */
762 mlx5_prepare_shared_data();
764 ctx = mlx5_glue->open_device(ibv_dev);
766 rte_errno = errno ? errno : ENODEV;
769 #ifdef HAVE_IBV_MLX5_MOD_SWP
770 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
773 * Multi-packet send is supported by ConnectX-4 Lx PF as well
774 * as all ConnectX-5 devices.
776 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
777 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
779 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
780 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
782 mlx5_glue->dv_query_device(ctx, &dv_attr);
783 if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
784 if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
785 DRV_LOG(DEBUG, "enhanced MPW is supported");
786 mps = MLX5_MPW_ENHANCED;
788 DRV_LOG(DEBUG, "MPW is supported");
792 DRV_LOG(DEBUG, "MPW isn't supported");
793 mps = MLX5_MPW_DISABLED;
795 #ifdef HAVE_IBV_MLX5_MOD_SWP
796 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
797 swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
798 DRV_LOG(DEBUG, "SWP support: %u", swp);
801 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
802 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
803 struct mlx5dv_striding_rq_caps mprq_caps =
804 dv_attr.striding_rq_caps;
806 DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
807 mprq_caps.min_single_stride_log_num_of_bytes);
808 DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
809 mprq_caps.max_single_stride_log_num_of_bytes);
810 DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
811 mprq_caps.min_single_wqe_log_num_of_strides);
812 DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
813 mprq_caps.max_single_wqe_log_num_of_strides);
814 DRV_LOG(DEBUG, "\tsupported_qpts: %d",
815 mprq_caps.supported_qpts);
816 DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
818 mprq_min_stride_size_n =
819 mprq_caps.min_single_stride_log_num_of_bytes;
820 mprq_max_stride_size_n =
821 mprq_caps.max_single_stride_log_num_of_bytes;
822 mprq_min_stride_num_n =
823 mprq_caps.min_single_wqe_log_num_of_strides;
824 mprq_max_stride_num_n =
825 mprq_caps.max_single_wqe_log_num_of_strides;
826 config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
827 mprq_min_stride_num_n);
830 if (RTE_CACHE_LINE_SIZE == 128 &&
831 !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
835 config.cqe_comp = cqe_comp;
836 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
837 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
838 tunnel_en = ((dv_attr.tunnel_offloads_caps &
839 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
840 (dv_attr.tunnel_offloads_caps &
841 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
843 DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
844 tunnel_en ? "" : "not ");
847 "tunnel offloading disabled due to old OFED/rdma-core version");
849 config.tunnel_en = tunnel_en;
850 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
851 mpls_en = ((dv_attr.tunnel_offloads_caps &
852 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
853 (dv_attr.tunnel_offloads_caps &
854 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
855 DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
856 mpls_en ? "" : "not ");
858 DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
859 " old OFED/rdma-core version or firmware configuration");
861 config.mpls_en = mpls_en;
862 err = mlx5_glue->query_device_ex(ctx, NULL, &attr);
864 DEBUG("ibv_query_device_ex() failed");
867 if (!switch_info->representor)
868 rte_strlcpy(name, dpdk_dev->name, sizeof(name));
870 snprintf(name, sizeof(name), "%s_representor_%u",
871 dpdk_dev->name, switch_info->port_name);
872 DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
873 if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
874 eth_dev = rte_eth_dev_attach_secondary(name);
875 if (eth_dev == NULL) {
876 DRV_LOG(ERR, "can not attach rte ethdev");
881 eth_dev->device = dpdk_dev;
882 eth_dev->dev_ops = &mlx5_dev_sec_ops;
883 err = mlx5_uar_init_secondary(eth_dev);
888 /* Receive command fd from primary process */
889 err = mlx5_socket_connect(eth_dev);
894 /* Remap UAR for Tx queues. */
895 err = mlx5_tx_uar_remap(eth_dev, err);
901 * Ethdev pointer is still required as input since
902 * the primary device is not accessible from the
905 eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
906 eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
907 claim_zero(mlx5_glue->close_device(ctx));
910 /* Check port status. */
911 err = mlx5_glue->query_port(ctx, 1, &port_attr);
913 DRV_LOG(ERR, "port query failed: %s", strerror(err));
916 if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
917 DRV_LOG(ERR, "port is not configured in Ethernet mode");
921 if (port_attr.state != IBV_PORT_ACTIVE)
922 DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
923 mlx5_glue->port_state_str(port_attr.state),
925 /* Allocate protection domain. */
926 pd = mlx5_glue->alloc_pd(ctx);
928 DRV_LOG(ERR, "PD allocation failure");
932 priv = rte_zmalloc("ethdev private structure",
934 RTE_CACHE_LINE_SIZE);
936 DRV_LOG(ERR, "priv allocation failure");
941 strncpy(priv->ibdev_name, priv->ctx->device->name,
942 sizeof(priv->ibdev_name));
943 strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
944 sizeof(priv->ibdev_path));
945 priv->device_attr = attr;
947 priv->mtu = ETHER_MTU;
949 /* Initialize UAR access locks for 32bit implementations. */
950 rte_spinlock_init(&priv->uar_lock_cq);
951 for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
952 rte_spinlock_init(&priv->uar_lock[i]);
954 /* Some internal functions rely on Netlink sockets, open them now. */
955 priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
956 priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
958 priv->representor = !!switch_info->representor;
959 priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
960 priv->representor_id =
961 switch_info->representor ? switch_info->port_name : -1;
963 * Look for sibling devices in order to reuse their switch domain
964 * if any, otherwise allocate one.
966 i = mlx5_dev_to_port_id(dpdk_dev, NULL, 0);
970 i = RTE_MIN(mlx5_dev_to_port_id(dpdk_dev, port_id, i), i);
972 const struct priv *opriv =
973 rte_eth_devices[port_id[i]].data->dev_private;
977 RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
979 priv->domain_id = opriv->domain_id;
983 if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
984 err = rte_eth_switch_domain_alloc(&priv->domain_id);
987 DRV_LOG(ERR, "unable to allocate switch domain: %s",
988 strerror(rte_errno));
993 err = mlx5_args(&config, dpdk_dev->devargs);
996 DRV_LOG(ERR, "failed to process device arguments: %s",
997 strerror(rte_errno));
1000 config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM);
1001 DRV_LOG(DEBUG, "checksum offloading is %ssupported",
1002 (config.hw_csum ? "" : "not "));
1003 #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
1004 config.flow_counter_en = !!attr.max_counter_sets;
1005 mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
1006 DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d",
1007 cs_desc.counter_type, cs_desc.num_of_cs,
1008 cs_desc.attributes);
1010 config.ind_table_max_size =
1011 attr.rss_caps.max_rwq_indirection_table_size;
1013 * Remove this check once DPDK supports larger/variable
1014 * indirection tables.
1016 if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
1017 config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
1018 DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
1019 config.ind_table_max_size);
1020 config.hw_vlan_strip = !!(attr.raw_packet_caps &
1021 IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
1022 DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
1023 (config.hw_vlan_strip ? "" : "not "));
1024 config.hw_fcs_strip = !!(attr.raw_packet_caps &
1025 IBV_RAW_PACKET_CAP_SCATTER_FCS);
1026 DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
1027 (config.hw_fcs_strip ? "" : "not "));
1028 #ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING
1029 config.hw_padding = !!attr.rx_pad_end_addr_align;
1031 DRV_LOG(DEBUG, "hardware Rx end alignment padding is %ssupported",
1032 (config.hw_padding ? "" : "not "));
1033 config.tso = (attr.tso_caps.max_tso > 0 &&
1034 (attr.tso_caps.supported_qpts &
1035 (1 << IBV_QPT_RAW_PACKET)));
1037 config.tso_max_payload_sz = attr.tso_caps.max_tso;
1039 * MPW is disabled by default, while the Enhanced MPW is enabled
1042 if (config.mps == MLX5_ARG_UNSET)
1043 config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
1046 config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
1047 DRV_LOG(INFO, "%sMPS is %s",
1048 config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
1049 config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
1050 if (config.cqe_comp && !cqe_comp) {
1051 DRV_LOG(WARNING, "Rx CQE compression isn't supported");
1052 config.cqe_comp = 0;
1054 if (config.mprq.enabled && mprq) {
1055 if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
1056 config.mprq.stride_num_n < mprq_min_stride_num_n) {
1057 config.mprq.stride_num_n =
1058 RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
1059 mprq_min_stride_num_n);
1061 "the number of strides"
1062 " for Multi-Packet RQ is out of range,"
1063 " setting default value (%u)",
1064 1 << config.mprq.stride_num_n);
1066 config.mprq.min_stride_size_n = mprq_min_stride_size_n;
1067 config.mprq.max_stride_size_n = mprq_max_stride_size_n;
1068 } else if (config.mprq.enabled && !mprq) {
1069 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
1070 config.mprq.enabled = 0;
1072 eth_dev = rte_eth_dev_allocate(name);
1073 if (eth_dev == NULL) {
1074 DRV_LOG(ERR, "can not allocate rte ethdev");
1078 if (priv->representor)
1079 eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
1080 eth_dev->data->dev_private = priv;
1081 priv->dev_data = eth_dev->data;
1082 eth_dev->data->mac_addrs = priv->mac;
1083 eth_dev->device = dpdk_dev;
1084 eth_dev->device->driver = &mlx5_driver.driver;
1085 err = mlx5_uar_init_primary(eth_dev);
1090 /* Configure the first MAC address by default. */
1091 if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
1093 "port %u cannot get MAC address, is mlx5_en"
1094 " loaded? (errno: %s)",
1095 eth_dev->data->port_id, strerror(rte_errno));
1100 "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
1101 eth_dev->data->port_id,
1102 mac.addr_bytes[0], mac.addr_bytes[1],
1103 mac.addr_bytes[2], mac.addr_bytes[3],
1104 mac.addr_bytes[4], mac.addr_bytes[5]);
1107 char ifname[IF_NAMESIZE];
1109 if (mlx5_get_ifname(eth_dev, &ifname) == 0)
1110 DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
1111 eth_dev->data->port_id, ifname);
1113 DRV_LOG(DEBUG, "port %u ifname is unknown",
1114 eth_dev->data->port_id);
1117 /* Get actual MTU if possible. */
1118 err = mlx5_get_mtu(eth_dev, &priv->mtu);
1123 DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
1125 /* Initialize burst functions to prevent crashes before link-up. */
1126 eth_dev->rx_pkt_burst = removed_rx_burst;
1127 eth_dev->tx_pkt_burst = removed_tx_burst;
1128 eth_dev->dev_ops = &mlx5_dev_ops;
1129 /* Register MAC address. */
1130 claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
1131 if (vf && config.vf_nl_en)
1132 mlx5_nl_mac_addr_sync(eth_dev);
1133 priv->mnl_socket = mlx5_nl_flow_socket_create();
1134 if (!priv->mnl_socket) {
1137 "flow rules relying on switch offloads will not be"
1138 " supported: cannot open libmnl socket: %s",
1139 strerror(rte_errno));
1141 struct rte_flow_error error;
1142 unsigned int ifindex = mlx5_ifindex(eth_dev);
1147 "cannot retrieve network interface index";
1149 err = mlx5_nl_flow_init(priv->mnl_socket, ifindex,
1154 "flow rules relying on switch offloads will"
1155 " not be supported: %s: %s",
1156 error.message, strerror(rte_errno));
1157 mlx5_nl_flow_socket_destroy(priv->mnl_socket);
1158 priv->mnl_socket = NULL;
1161 TAILQ_INIT(&priv->flows);
1162 TAILQ_INIT(&priv->ctrl_flows);
1163 /* Hint libmlx5 to use PMD allocator for data plane resources */
1164 struct mlx5dv_ctx_allocators alctr = {
1165 .alloc = &mlx5_alloc_verbs_buf,
1166 .free = &mlx5_free_verbs_buf,
1169 mlx5_glue->dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
1170 (void *)((uintptr_t)&alctr));
1171 /* Bring Ethernet device up. */
1172 DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
1173 eth_dev->data->port_id);
1174 mlx5_set_link_up(eth_dev);
1176 * Even though the interrupt handler is not installed yet,
1177 * interrupts will still trigger on the asyn_fd from
1178 * Verbs context returned by ibv_open_device().
1180 mlx5_link_update(eth_dev, 0);
1181 /* Store device configuration on private structure. */
1182 priv->config = config;
1183 /* Supported Verbs flow priority number detection. */
1184 err = mlx5_flow_discover_priorities(eth_dev);
1187 priv->config.flow_prio = err;
1189 * Once the device is added to the list of memory event
1190 * callback, its global MR cache table cannot be expanded
1191 * on the fly because of deadlock. If it overflows, lookup
1192 * should be done by searching MR list linearly, which is slow.
1194 err = mlx5_mr_btree_init(&priv->mr.cache,
1195 MLX5_MR_BTREE_CACHE_N * 2,
1196 eth_dev->device->numa_node);
1201 /* Add device to memory callback list. */
1202 rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1203 LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
1204 priv, mem_event_cb);
1205 rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1209 if (priv->nl_socket_route >= 0)
1210 close(priv->nl_socket_route);
1211 if (priv->nl_socket_rdma >= 0)
1212 close(priv->nl_socket_rdma);
1213 if (priv->mnl_socket)
1214 mlx5_nl_flow_socket_destroy(priv->mnl_socket);
1216 claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1220 claim_zero(mlx5_glue->dealloc_pd(pd));
1222 rte_eth_dev_release_port(eth_dev);
1224 claim_zero(mlx5_glue->close_device(ctx));
1230 /** Data associated with devices to spawn. */
1231 struct mlx5_dev_spawn_data {
1232 unsigned int ifindex; /**< Network interface index. */
1233 struct mlx5_switch_info info; /**< Switch information. */
1234 struct ibv_device *ibv_dev; /**< Associated IB device. */
1235 struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */
1239 * Comparison callback to sort device data.
1241 * This is meant to be used with qsort().
1244 * Pointer to pointer to first data object.
1246 * Pointer to pointer to second data object.
1249 * 0 if both objects are equal, less than 0 if the first argument is less
1250 * than the second, greater than 0 otherwise.
1253 mlx5_dev_spawn_data_cmp(const void *a, const void *b)
1255 const struct mlx5_switch_info *si_a =
1256 &((const struct mlx5_dev_spawn_data *)a)->info;
1257 const struct mlx5_switch_info *si_b =
1258 &((const struct mlx5_dev_spawn_data *)b)->info;
1261 /* Master device first. */
1262 ret = si_b->master - si_a->master;
1265 /* Then representor devices. */
1266 ret = si_b->representor - si_a->representor;
1269 /* Unidentified devices come last in no specific order. */
1270 if (!si_a->representor)
1272 /* Order representors by name. */
1273 return si_a->port_name - si_b->port_name;
1277 * DPDK callback to register a PCI device.
1279 * This function spawns Ethernet devices out of a given PCI device.
1281 * @param[in] pci_drv
1282 * PCI driver structure (mlx5_driver).
1283 * @param[in] pci_dev
1284 * PCI device information.
1287 * 0 on success, a negative errno value otherwise and rte_errno is set.
1290 mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
1291 struct rte_pci_device *pci_dev)
1293 struct ibv_device **ibv_list;
1298 assert(pci_drv == &mlx5_driver);
1300 ibv_list = mlx5_glue->get_device_list(&ret);
1302 rte_errno = errno ? errno : ENOSYS;
1303 DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
1307 struct ibv_device *ibv_match[ret + 1];
1310 struct rte_pci_addr pci_addr;
1312 DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
1313 if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr))
1315 if (pci_dev->addr.domain != pci_addr.domain ||
1316 pci_dev->addr.bus != pci_addr.bus ||
1317 pci_dev->addr.devid != pci_addr.devid ||
1318 pci_dev->addr.function != pci_addr.function)
1320 DRV_LOG(INFO, "PCI information matches for device \"%s\"",
1321 ibv_list[ret]->name);
1322 ibv_match[n++] = ibv_list[ret];
1324 ibv_match[n] = NULL;
1326 struct mlx5_dev_spawn_data list[n];
1327 int nl_route = n ? mlx5_nl_init(NETLINK_ROUTE) : -1;
1328 int nl_rdma = n ? mlx5_nl_init(NETLINK_RDMA) : -1;
1333 * The existence of several matching entries (n > 1) means port
1334 * representors have been instantiated. No existing Verbs call nor
1335 * /sys entries can tell them apart, this can only be done through
1336 * Netlink calls assuming kernel drivers are recent enough to
1339 * In the event of identification failure through Netlink, try again
1340 * through sysfs, then either:
1342 * 1. No device matches (n == 0), complain and bail out.
1343 * 2. A single IB device matches (n == 1) and is not a representor,
1344 * assume no switch support.
1345 * 3. Otherwise no safe assumptions can be made; complain louder and
1348 for (i = 0; i != n; ++i) {
1349 list[i].ibv_dev = ibv_match[i];
1350 list[i].eth_dev = NULL;
1352 list[i].ifindex = 0;
1354 list[i].ifindex = mlx5_nl_ifindex
1355 (nl_rdma, list[i].ibv_dev->name);
1358 mlx5_nl_switch_info(nl_route, list[i].ifindex,
1360 ((!list[i].info.representor && !list[i].info.master) &&
1361 mlx5_sysfs_switch_info(list[i].ifindex, &list[i].info))) {
1362 list[i].ifindex = 0;
1363 memset(&list[i].info, 0, sizeof(list[i].info));
1371 /* Count unidentified devices. */
1372 for (u = 0, i = 0; i != n; ++i)
1373 if (!list[i].info.master && !list[i].info.representor)
1376 if (n == 1 && u == 1) {
1378 DRV_LOG(INFO, "no switch support detected");
1382 "unable to tell which of the matching devices"
1383 " is the master (lack of kernel support?)");
1388 * Sort list to probe devices in natural order for users convenience
1389 * (i.e. master first, then representors from lowest to highest ID).
1392 qsort(list, n, sizeof(*list), mlx5_dev_spawn_data_cmp);
1393 switch (pci_dev->id.device_id) {
1394 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1395 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
1396 case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
1397 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
1403 for (i = 0; i != n; ++i) {
1406 list[i].eth_dev = mlx5_dev_spawn
1407 (&pci_dev->device, list[i].ibv_dev, vf, &list[i].info);
1408 if (!list[i].eth_dev) {
1409 if (rte_errno != EBUSY)
1411 /* Device is disabled, ignore it. */
1414 restore = list[i].eth_dev->data->dev_flags;
1415 rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
1416 /* Restore non-PCI flags cleared by the above call. */
1417 list[i].eth_dev->data->dev_flags |= restore;
1418 rte_eth_dev_probing_finish(list[i].eth_dev);
1420 mlx5_glue->free_device_list(ibv_list);
1423 "no Verbs device matches PCI device " PCI_PRI_FMT ","
1424 " are kernel drivers loaded?",
1425 pci_dev->addr.domain, pci_dev->addr.bus,
1426 pci_dev->addr.devid, pci_dev->addr.function);
1429 } else if (i != n) {
1431 "probe of PCI device " PCI_PRI_FMT " aborted after"
1432 " encountering an error: %s",
1433 pci_dev->addr.domain, pci_dev->addr.bus,
1434 pci_dev->addr.devid, pci_dev->addr.function,
1435 strerror(rte_errno));
1439 if (!list[i].eth_dev)
1441 mlx5_dev_close(list[i].eth_dev);
1442 if (rte_eal_process_type() == RTE_PROC_PRIMARY)
1443 rte_free(list[i].eth_dev->data->dev_private);
1444 claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
1446 /* Restore original error. */
1454 static const struct rte_pci_id mlx5_pci_id_map[] = {
1456 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1457 PCI_DEVICE_ID_MELLANOX_CONNECTX4)
1460 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1461 PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
1464 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1465 PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
1468 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1469 PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
1472 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1473 PCI_DEVICE_ID_MELLANOX_CONNECTX5)
1476 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1477 PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
1480 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1481 PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
1484 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1485 PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
1488 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1489 PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
1496 static struct rte_pci_driver mlx5_driver = {
1498 .name = MLX5_DRIVER_NAME
1500 .id_table = mlx5_pci_id_map,
1501 .probe = mlx5_pci_probe,
1502 .drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV,
1505 #ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
1508 * Suffix RTE_EAL_PMD_PATH with "-glue".
1510 * This function performs a sanity check on RTE_EAL_PMD_PATH before
1511 * suffixing its last component.
1514 * Output buffer, should be large enough otherwise NULL is returned.
1519 * Pointer to @p buf or @p NULL in case suffix cannot be appended.
1522 mlx5_glue_path(char *buf, size_t size)
1524 static const char *const bad[] = { "/", ".", "..", NULL };
1525 const char *path = RTE_EAL_PMD_PATH;
1526 size_t len = strlen(path);
1530 while (len && path[len - 1] == '/')
1532 for (off = len; off && path[off - 1] != '/'; --off)
1534 for (i = 0; bad[i]; ++i)
1535 if (!strncmp(path + off, bad[i], (int)(len - off)))
1537 i = snprintf(buf, size, "%.*s-glue", (int)len, path);
1538 if (i == -1 || (size_t)i >= size)
1543 "unable to append \"-glue\" to last component of"
1544 " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
1545 " please re-configure DPDK");
1550 * Initialization routine for run-time dependency on rdma-core.
1553 mlx5_glue_init(void)
1555 char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
1556 const char *path[] = {
1558 * A basic security check is necessary before trusting
1559 * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
1561 (geteuid() == getuid() && getegid() == getgid() ?
1562 getenv("MLX5_GLUE_PATH") : NULL),
1564 * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
1565 * variant, otherwise let dlopen() look up libraries on its
1568 (*RTE_EAL_PMD_PATH ?
1569 mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
1572 void *handle = NULL;
1576 while (!handle && i != RTE_DIM(path)) {
1585 end = strpbrk(path[i], ":;");
1587 end = path[i] + strlen(path[i]);
1588 len = end - path[i];
1593 ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
1595 (!len || *(end - 1) == '/') ? "" : "/");
1598 if (sizeof(name) != (size_t)ret + 1)
1600 DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
1602 handle = dlopen(name, RTLD_LAZY);
1613 DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
1616 sym = dlsym(handle, "mlx5_glue");
1617 if (!sym || !*sym) {
1621 DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
1630 "cannot initialize PMD due to missing run-time dependency on"
1631 " rdma-core libraries (libibverbs, libmlx5)");
1638 * Driver initialization routine.
1640 RTE_INIT(rte_mlx5_pmd_init)
1642 /* Initialize driver log type. */
1643 mlx5_logtype = rte_log_register("pmd.net.mlx5");
1644 if (mlx5_logtype >= 0)
1645 rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE);
1647 /* Build the static tables for Verbs conversion. */
1648 mlx5_set_ptype_table();
1649 mlx5_set_cksum_table();
1650 mlx5_set_swp_types_table();
1652 * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
1653 * huge pages. Calling ibv_fork_init() during init allows
1654 * applications to use fork() safely for purposes other than
1655 * using this PMD, which is not supported in forked processes.
1657 setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
1658 /* Match the size of Rx completion entry to the size of a cacheline. */
1659 if (RTE_CACHE_LINE_SIZE == 128)
1660 setenv("MLX5_CQE_SIZE", "128", 0);
1662 * MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to
1663 * cleanup all the Verbs resources even when the device was removed.
1665 setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1);
1666 #ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
1667 if (mlx5_glue_init())
1672 /* Glue structure must not contain any NULL pointers. */
1676 for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
1677 assert(((const void *const *)mlx5_glue)[i]);
1680 if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
1682 "rdma-core glue \"%s\" mismatch: \"%s\" is required",
1683 mlx5_glue->version, MLX5_GLUE_VERSION);
1686 mlx5_glue->fork_init();
1687 rte_pci_register(&mlx5_driver);
1690 RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
1691 RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
1692 RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");