net/mlx5: fix flow action destroy wrapper
[dpdk.git] / drivers / net / mlx5 / mlx5.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright 2015 6WIND S.A.
3  * Copyright 2015 Mellanox Technologies, Ltd
4  */
5
6 #include <stddef.h>
7 #include <unistd.h>
8 #include <string.h>
9 #include <stdint.h>
10 #include <stdlib.h>
11 #include <errno.h>
12
13 #include <rte_malloc.h>
14 #include <rte_ethdev_driver.h>
15 #include <rte_ethdev_pci.h>
16 #include <rte_pci.h>
17 #include <rte_bus_pci.h>
18 #include <rte_common.h>
19 #include <rte_kvargs.h>
20 #include <rte_rwlock.h>
21 #include <rte_spinlock.h>
22 #include <rte_string_fns.h>
23 #include <rte_alarm.h>
24 #include <rte_cycles.h>
25
26 #include <mlx5_glue.h>
27 #include <mlx5_devx_cmds.h>
28 #include <mlx5_common.h>
29 #include <mlx5_common_os.h>
30 #include <mlx5_common_mp.h>
31 #include <mlx5_common_pci.h>
32 #include <mlx5_malloc.h>
33
34 #include "mlx5_defs.h"
35 #include "mlx5.h"
36 #include "mlx5_utils.h"
37 #include "mlx5_rxtx.h"
38 #include "mlx5_autoconf.h"
39 #include "mlx5_mr.h"
40 #include "mlx5_flow.h"
41 #include "mlx5_flow_os.h"
42 #include "rte_pmd_mlx5.h"
43
44 /* Device parameter to enable RX completion queue compression. */
45 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
46
47 /* Device parameter to enable RX completion entry padding to 128B. */
48 #define MLX5_RXQ_CQE_PAD_EN "rxq_cqe_pad_en"
49
50 /* Device parameter to enable padding Rx packet to cacheline size. */
51 #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
52
53 /* Device parameter to enable Multi-Packet Rx queue. */
54 #define MLX5_RX_MPRQ_EN "mprq_en"
55
56 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
57 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
58
59 /* Device parameter to configure log 2 of the stride size for MPRQ. */
60 #define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size"
61
62 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
63 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
64
65 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
66 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
67
68 /* Device parameter to configure inline send. Deprecated, ignored.*/
69 #define MLX5_TXQ_INLINE "txq_inline"
70
71 /* Device parameter to limit packet size to inline with ordinary SEND. */
72 #define MLX5_TXQ_INLINE_MAX "txq_inline_max"
73
74 /* Device parameter to configure minimal data size to inline. */
75 #define MLX5_TXQ_INLINE_MIN "txq_inline_min"
76
77 /* Device parameter to limit packet size to inline with Enhanced MPW. */
78 #define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
79
80 /*
81  * Device parameter to configure the number of TX queues threshold for
82  * enabling inline send.
83  */
84 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
85
86 /*
87  * Device parameter to configure the number of TX queues threshold for
88  * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
89  */
90 #define MLX5_TXQS_MAX_VEC "txqs_max_vec"
91
92 /* Device parameter to enable multi-packet send WQEs. */
93 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
94
95 /*
96  * Device parameter to force doorbell register mapping
97  * to non-cahed region eliminating the extra write memory barrier.
98  */
99 #define MLX5_TX_DB_NC "tx_db_nc"
100
101 /*
102  * Device parameter to include 2 dsegs in the title WQEBB.
103  * Deprecated, ignored.
104  */
105 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
106
107 /*
108  * Device parameter to limit the size of inlining packet.
109  * Deprecated, ignored.
110  */
111 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
112
113 /*
114  * Device parameter to enable Tx scheduling on timestamps
115  * and specify the packet pacing granularity in nanoseconds.
116  */
117 #define MLX5_TX_PP "tx_pp"
118
119 /*
120  * Device parameter to specify skew in nanoseconds on Tx datapath,
121  * it represents the time between SQ start WQE processing and
122  * appearing actual packet data on the wire.
123  */
124 #define MLX5_TX_SKEW "tx_skew"
125
126 /*
127  * Device parameter to enable hardware Tx vector.
128  * Deprecated, ignored (no vectorized Tx routines anymore).
129  */
130 #define MLX5_TX_VEC_EN "tx_vec_en"
131
132 /* Device parameter to enable hardware Rx vector. */
133 #define MLX5_RX_VEC_EN "rx_vec_en"
134
135 /* Allow L3 VXLAN flow creation. */
136 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
137
138 /* Activate DV E-Switch flow steering. */
139 #define MLX5_DV_ESW_EN "dv_esw_en"
140
141 /* Activate DV flow steering. */
142 #define MLX5_DV_FLOW_EN "dv_flow_en"
143
144 /* Enable extensive flow metadata support. */
145 #define MLX5_DV_XMETA_EN "dv_xmeta_en"
146
147 /* Device parameter to let the user manage the lacp traffic of bonded device */
148 #define MLX5_LACP_BY_USER "lacp_by_user"
149
150 /* Activate Netlink support in VF mode. */
151 #define MLX5_VF_NL_EN "vf_nl_en"
152
153 /* Enable extending memsegs when creating a MR. */
154 #define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en"
155
156 /* Select port representors to instantiate. */
157 #define MLX5_REPRESENTOR "representor"
158
159 /* Device parameter to configure the maximum number of dump files per queue. */
160 #define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
161
162 /* Configure timeout of LRO session (in microseconds). */
163 #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
164
165 /*
166  * Device parameter to configure the total data buffer size for a single
167  * hairpin queue (logarithm value).
168  */
169 #define MLX5_HP_BUF_SIZE "hp_buf_log_sz"
170
171 /* Flow memory reclaim mode. */
172 #define MLX5_RECLAIM_MEM "reclaim_mem_mode"
173
174 /* The default memory allocator used in PMD. */
175 #define MLX5_SYS_MEM_EN "sys_mem_en"
176 /* Decap will be used or not. */
177 #define MLX5_DECAP_EN "decap_en"
178
179 /* Shared memory between primary and secondary processes. */
180 struct mlx5_shared_data *mlx5_shared_data;
181
182 /** Driver-specific log messages type. */
183 int mlx5_logtype;
184
185 static LIST_HEAD(, mlx5_dev_ctx_shared) mlx5_dev_ctx_list =
186                                                 LIST_HEAD_INITIALIZER();
187 static pthread_mutex_t mlx5_dev_ctx_list_mutex = PTHREAD_MUTEX_INITIALIZER;
188
189 static const struct mlx5_indexed_pool_config mlx5_ipool_cfg[] = {
190 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
191         [MLX5_IPOOL_DECAP_ENCAP] = {
192                 .size = sizeof(struct mlx5_flow_dv_encap_decap_resource),
193                 .trunk_size = 64,
194                 .grow_trunk = 3,
195                 .grow_shift = 2,
196                 .need_lock = 1,
197                 .release_mem_en = 1,
198                 .malloc = mlx5_malloc,
199                 .free = mlx5_free,
200                 .type = "mlx5_encap_decap_ipool",
201         },
202         [MLX5_IPOOL_PUSH_VLAN] = {
203                 .size = sizeof(struct mlx5_flow_dv_push_vlan_action_resource),
204                 .trunk_size = 64,
205                 .grow_trunk = 3,
206                 .grow_shift = 2,
207                 .need_lock = 1,
208                 .release_mem_en = 1,
209                 .malloc = mlx5_malloc,
210                 .free = mlx5_free,
211                 .type = "mlx5_push_vlan_ipool",
212         },
213         [MLX5_IPOOL_TAG] = {
214                 .size = sizeof(struct mlx5_flow_dv_tag_resource),
215                 .trunk_size = 64,
216                 .grow_trunk = 3,
217                 .grow_shift = 2,
218                 .need_lock = 1,
219                 .release_mem_en = 1,
220                 .malloc = mlx5_malloc,
221                 .free = mlx5_free,
222                 .type = "mlx5_tag_ipool",
223         },
224         [MLX5_IPOOL_PORT_ID] = {
225                 .size = sizeof(struct mlx5_flow_dv_port_id_action_resource),
226                 .trunk_size = 64,
227                 .grow_trunk = 3,
228                 .grow_shift = 2,
229                 .need_lock = 1,
230                 .release_mem_en = 1,
231                 .malloc = mlx5_malloc,
232                 .free = mlx5_free,
233                 .type = "mlx5_port_id_ipool",
234         },
235         [MLX5_IPOOL_JUMP] = {
236                 .size = sizeof(struct mlx5_flow_tbl_data_entry),
237                 .trunk_size = 64,
238                 .grow_trunk = 3,
239                 .grow_shift = 2,
240                 .need_lock = 1,
241                 .release_mem_en = 1,
242                 .malloc = mlx5_malloc,
243                 .free = mlx5_free,
244                 .type = "mlx5_jump_ipool",
245         },
246         [MLX5_IPOOL_SAMPLE] = {
247                 .size = sizeof(struct mlx5_flow_dv_sample_resource),
248                 .trunk_size = 64,
249                 .grow_trunk = 3,
250                 .grow_shift = 2,
251                 .need_lock = 1,
252                 .release_mem_en = 1,
253                 .malloc = mlx5_malloc,
254                 .free = mlx5_free,
255                 .type = "mlx5_sample_ipool",
256         },
257         [MLX5_IPOOL_DEST_ARRAY] = {
258                 .size = sizeof(struct mlx5_flow_dv_dest_array_resource),
259                 .trunk_size = 64,
260                 .grow_trunk = 3,
261                 .grow_shift = 2,
262                 .need_lock = 1,
263                 .release_mem_en = 1,
264                 .malloc = mlx5_malloc,
265                 .free = mlx5_free,
266                 .type = "mlx5_dest_array_ipool",
267         },
268         [MLX5_IPOOL_TUNNEL_ID] = {
269                 .size = sizeof(struct mlx5_flow_tunnel),
270                 .trunk_size = MLX5_MAX_TUNNELS,
271                 .need_lock = 1,
272                 .release_mem_en = 1,
273                 .type = "mlx5_tunnel_offload",
274         },
275         [MLX5_IPOOL_TNL_TBL_ID] = {
276                 .size = 0,
277                 .need_lock = 1,
278                 .type = "mlx5_flow_tnl_tbl_ipool",
279         },
280 #endif
281         [MLX5_IPOOL_MTR] = {
282                 .size = sizeof(struct mlx5_flow_meter),
283                 .trunk_size = 64,
284                 .grow_trunk = 3,
285                 .grow_shift = 2,
286                 .need_lock = 1,
287                 .release_mem_en = 1,
288                 .malloc = mlx5_malloc,
289                 .free = mlx5_free,
290                 .type = "mlx5_meter_ipool",
291         },
292         [MLX5_IPOOL_MCP] = {
293                 .size = sizeof(struct mlx5_flow_mreg_copy_resource),
294                 .trunk_size = 64,
295                 .grow_trunk = 3,
296                 .grow_shift = 2,
297                 .need_lock = 1,
298                 .release_mem_en = 1,
299                 .malloc = mlx5_malloc,
300                 .free = mlx5_free,
301                 .type = "mlx5_mcp_ipool",
302         },
303         [MLX5_IPOOL_HRXQ] = {
304                 .size = (sizeof(struct mlx5_hrxq) + MLX5_RSS_HASH_KEY_LEN),
305                 .trunk_size = 64,
306                 .grow_trunk = 3,
307                 .grow_shift = 2,
308                 .need_lock = 1,
309                 .release_mem_en = 1,
310                 .malloc = mlx5_malloc,
311                 .free = mlx5_free,
312                 .type = "mlx5_hrxq_ipool",
313         },
314         [MLX5_IPOOL_MLX5_FLOW] = {
315                 /*
316                  * MLX5_IPOOL_MLX5_FLOW size varies for DV and VERBS flows.
317                  * It set in run time according to PCI function configuration.
318                  */
319                 .size = 0,
320                 .trunk_size = 64,
321                 .grow_trunk = 3,
322                 .grow_shift = 2,
323                 .need_lock = 1,
324                 .release_mem_en = 1,
325                 .malloc = mlx5_malloc,
326                 .free = mlx5_free,
327                 .type = "mlx5_flow_handle_ipool",
328         },
329         [MLX5_IPOOL_RTE_FLOW] = {
330                 .size = sizeof(struct rte_flow),
331                 .trunk_size = 4096,
332                 .need_lock = 1,
333                 .release_mem_en = 1,
334                 .malloc = mlx5_malloc,
335                 .free = mlx5_free,
336                 .type = "rte_flow_ipool",
337         },
338         [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID] = {
339                 .size = 0,
340                 .need_lock = 1,
341                 .type = "mlx5_flow_rss_id_ipool",
342         },
343         [MLX5_IPOOL_RSS_SHARED_ACTIONS] = {
344                 .size = sizeof(struct mlx5_shared_action_rss),
345                 .trunk_size = 64,
346                 .grow_trunk = 3,
347                 .grow_shift = 2,
348                 .need_lock = 1,
349                 .release_mem_en = 1,
350                 .malloc = mlx5_malloc,
351                 .free = mlx5_free,
352                 .type = "mlx5_shared_action_rss",
353         },
354 };
355
356
357 #define MLX5_FLOW_MIN_ID_POOL_SIZE 512
358 #define MLX5_ID_GENERATION_ARRAY_FACTOR 16
359
360 #define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 4096
361
362 /**
363  * Initialize the ASO aging management structure.
364  *
365  * @param[in] sh
366  *   Pointer to mlx5_dev_ctx_shared object to free
367  *
368  * @return
369  *   0 on success, a negative errno value otherwise and rte_errno is set.
370  */
371 int
372 mlx5_flow_aso_age_mng_init(struct mlx5_dev_ctx_shared *sh)
373 {
374         int err;
375
376         if (sh->aso_age_mng)
377                 return 0;
378         sh->aso_age_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->aso_age_mng),
379                                       RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
380         if (!sh->aso_age_mng) {
381                 DRV_LOG(ERR, "aso_age_mng allocation was failed.");
382                 rte_errno = ENOMEM;
383                 return -ENOMEM;
384         }
385         err = mlx5_aso_queue_init(sh);
386         if (err) {
387                 mlx5_free(sh->aso_age_mng);
388                 return -1;
389         }
390         rte_spinlock_init(&sh->aso_age_mng->resize_sl);
391         rte_spinlock_init(&sh->aso_age_mng->free_sl);
392         LIST_INIT(&sh->aso_age_mng->free);
393         return 0;
394 }
395
396 /**
397  * Close and release all the resources of the ASO aging management structure.
398  *
399  * @param[in] sh
400  *   Pointer to mlx5_dev_ctx_shared object to free.
401  */
402 static void
403 mlx5_flow_aso_age_mng_close(struct mlx5_dev_ctx_shared *sh)
404 {
405         int i, j;
406
407         mlx5_aso_queue_stop(sh);
408         mlx5_aso_queue_uninit(sh);
409         if (sh->aso_age_mng->pools) {
410                 struct mlx5_aso_age_pool *pool;
411
412                 for (i = 0; i < sh->aso_age_mng->next; ++i) {
413                         pool = sh->aso_age_mng->pools[i];
414                         claim_zero(mlx5_devx_cmd_destroy
415                                                 (pool->flow_hit_aso_obj));
416                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j)
417                                 if (pool->actions[j].dr_action)
418                                         claim_zero
419                                             (mlx5_flow_os_destroy_flow_action
420                                               (pool->actions[j].dr_action));
421                         mlx5_free(pool);
422                 }
423                 mlx5_free(sh->aso_age_mng->pools);
424         }
425         mlx5_free(sh->aso_age_mng);
426 }
427
428 /**
429  * Initialize the shared aging list information per port.
430  *
431  * @param[in] sh
432  *   Pointer to mlx5_dev_ctx_shared object.
433  */
434 static void
435 mlx5_flow_aging_init(struct mlx5_dev_ctx_shared *sh)
436 {
437         uint32_t i;
438         struct mlx5_age_info *age_info;
439
440         for (i = 0; i < sh->max_port; i++) {
441                 age_info = &sh->port[i].age_info;
442                 age_info->flags = 0;
443                 TAILQ_INIT(&age_info->aged_counters);
444                 LIST_INIT(&age_info->aged_aso);
445                 rte_spinlock_init(&age_info->aged_sl);
446                 MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
447         }
448 }
449
450 /**
451  * Initialize the counters management structure.
452  *
453  * @param[in] sh
454  *   Pointer to mlx5_dev_ctx_shared object to free
455  */
456 static void
457 mlx5_flow_counters_mng_init(struct mlx5_dev_ctx_shared *sh)
458 {
459         int i;
460
461         memset(&sh->cmng, 0, sizeof(sh->cmng));
462         TAILQ_INIT(&sh->cmng.flow_counters);
463         sh->cmng.min_id = MLX5_CNT_BATCH_OFFSET;
464         sh->cmng.max_id = -1;
465         sh->cmng.last_pool_idx = POOL_IDX_INVALID;
466         rte_spinlock_init(&sh->cmng.pool_update_sl);
467         for (i = 0; i < MLX5_COUNTER_TYPE_MAX; i++) {
468                 TAILQ_INIT(&sh->cmng.counters[i]);
469                 rte_spinlock_init(&sh->cmng.csl[i]);
470         }
471 }
472
473 /**
474  * Destroy all the resources allocated for a counter memory management.
475  *
476  * @param[in] mng
477  *   Pointer to the memory management structure.
478  */
479 static void
480 mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
481 {
482         uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
483
484         LIST_REMOVE(mng, next);
485         claim_zero(mlx5_devx_cmd_destroy(mng->dm));
486         claim_zero(mlx5_os_umem_dereg(mng->umem));
487         mlx5_free(mem);
488 }
489
490 /**
491  * Close and release all the resources of the counters management.
492  *
493  * @param[in] sh
494  *   Pointer to mlx5_dev_ctx_shared object to free.
495  */
496 static void
497 mlx5_flow_counters_mng_close(struct mlx5_dev_ctx_shared *sh)
498 {
499         struct mlx5_counter_stats_mem_mng *mng;
500         int i, j;
501         int retries = 1024;
502
503         rte_errno = 0;
504         while (--retries) {
505                 rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
506                 if (rte_errno != EINPROGRESS)
507                         break;
508                 rte_pause();
509         }
510
511         if (sh->cmng.pools) {
512                 struct mlx5_flow_counter_pool *pool;
513                 uint16_t n_valid = sh->cmng.n_valid;
514                 bool fallback = sh->cmng.counter_fallback;
515
516                 for (i = 0; i < n_valid; ++i) {
517                         pool = sh->cmng.pools[i];
518                         if (!fallback && pool->min_dcs)
519                                 claim_zero(mlx5_devx_cmd_destroy
520                                                                (pool->min_dcs));
521                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
522                                 struct mlx5_flow_counter *cnt =
523                                                 MLX5_POOL_GET_CNT(pool, j);
524
525                                 if (cnt->action)
526                                         claim_zero
527                                          (mlx5_flow_os_destroy_flow_action
528                                           (cnt->action));
529                                 if (fallback && MLX5_POOL_GET_CNT
530                                     (pool, j)->dcs_when_free)
531                                         claim_zero(mlx5_devx_cmd_destroy
532                                                    (cnt->dcs_when_free));
533                         }
534                         mlx5_free(pool);
535                 }
536                 mlx5_free(sh->cmng.pools);
537         }
538         mng = LIST_FIRST(&sh->cmng.mem_mngs);
539         while (mng) {
540                 mlx5_flow_destroy_counter_stat_mem_mng(mng);
541                 mng = LIST_FIRST(&sh->cmng.mem_mngs);
542         }
543         memset(&sh->cmng, 0, sizeof(sh->cmng));
544 }
545
546 /* Send FLOW_AGED event if needed. */
547 void
548 mlx5_age_event_prepare(struct mlx5_dev_ctx_shared *sh)
549 {
550         struct mlx5_age_info *age_info;
551         uint32_t i;
552
553         for (i = 0; i < sh->max_port; i++) {
554                 age_info = &sh->port[i].age_info;
555                 if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
556                         continue;
557                 if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER))
558                         rte_eth_dev_callback_process
559                                 (&rte_eth_devices[sh->port[i].devx_ih_port_id],
560                                 RTE_ETH_EVENT_FLOW_AGED, NULL);
561                 age_info->flags = 0;
562         }
563 }
564
565 /**
566  * Initialize the flow resources' indexed mempool.
567  *
568  * @param[in] sh
569  *   Pointer to mlx5_dev_ctx_shared object.
570  * @param[in] sh
571  *   Pointer to user dev config.
572  */
573 static void
574 mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh,
575                        const struct mlx5_dev_config *config)
576 {
577         uint8_t i;
578         struct mlx5_indexed_pool_config cfg;
579
580         for (i = 0; i < MLX5_IPOOL_MAX; ++i) {
581                 cfg = mlx5_ipool_cfg[i];
582                 switch (i) {
583                 default:
584                         break;
585                 /*
586                  * Set MLX5_IPOOL_MLX5_FLOW ipool size
587                  * according to PCI function flow configuration.
588                  */
589                 case MLX5_IPOOL_MLX5_FLOW:
590                         cfg.size = config->dv_flow_en ?
591                                 sizeof(struct mlx5_flow_handle) :
592                                 MLX5_FLOW_HANDLE_VERBS_SIZE;
593                         break;
594                 }
595                 if (config->reclaim_mode)
596                         cfg.release_mem_en = 1;
597                 sh->ipool[i] = mlx5_ipool_create(&cfg);
598         }
599 }
600
601 /**
602  * Release the flow resources' indexed mempool.
603  *
604  * @param[in] sh
605  *   Pointer to mlx5_dev_ctx_shared object.
606  */
607 static void
608 mlx5_flow_ipool_destroy(struct mlx5_dev_ctx_shared *sh)
609 {
610         uint8_t i;
611
612         for (i = 0; i < MLX5_IPOOL_MAX; ++i)
613                 mlx5_ipool_destroy(sh->ipool[i]);
614 }
615
616 /*
617  * Check if dynamic flex parser for eCPRI already exists.
618  *
619  * @param dev
620  *   Pointer to Ethernet device structure.
621  *
622  * @return
623  *   true on exists, false on not.
624  */
625 bool
626 mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
627 {
628         struct mlx5_priv *priv = dev->data->dev_private;
629         struct mlx5_flex_parser_profiles *prf =
630                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
631
632         return !!prf->obj;
633 }
634
635 /*
636  * Allocation of a flex parser for eCPRI. Once created, this parser related
637  * resources will be held until the device is closed.
638  *
639  * @param dev
640  *   Pointer to Ethernet device structure.
641  *
642  * @return
643  *   0 on success, a negative errno value otherwise and rte_errno is set.
644  */
645 int
646 mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
647 {
648         struct mlx5_priv *priv = dev->data->dev_private;
649         struct mlx5_flex_parser_profiles *prf =
650                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
651         struct mlx5_devx_graph_node_attr node = {
652                 .modify_field_select = 0,
653         };
654         uint32_t ids[8];
655         int ret;
656
657         if (!priv->config.hca_attr.parse_graph_flex_node) {
658                 DRV_LOG(ERR, "Dynamic flex parser is not supported "
659                         "for device %s.", priv->dev_data->name);
660                 return -ENOTSUP;
661         }
662         node.header_length_mode = MLX5_GRAPH_NODE_LEN_FIXED;
663         /* 8 bytes now: 4B common header + 4B message body header. */
664         node.header_length_base_value = 0x8;
665         /* After MAC layer: Ether / VLAN. */
666         node.in[0].arc_parse_graph_node = MLX5_GRAPH_ARC_NODE_MAC;
667         /* Type of compared condition should be 0xAEFE in the L2 layer. */
668         node.in[0].compare_condition_value = RTE_ETHER_TYPE_ECPRI;
669         /* Sample #0: type in common header. */
670         node.sample[0].flow_match_sample_en = 1;
671         /* Fixed offset. */
672         node.sample[0].flow_match_sample_offset_mode = 0x0;
673         /* Only the 2nd byte will be used. */
674         node.sample[0].flow_match_sample_field_base_offset = 0x0;
675         /* Sample #1: message payload. */
676         node.sample[1].flow_match_sample_en = 1;
677         /* Fixed offset. */
678         node.sample[1].flow_match_sample_offset_mode = 0x0;
679         /*
680          * Only the first two bytes will be used right now, and its offset will
681          * start after the common header that with the length of a DW(u32).
682          */
683         node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
684         prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->ctx, &node);
685         if (!prf->obj) {
686                 DRV_LOG(ERR, "Failed to create flex parser node object.");
687                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
688         }
689         prf->num = 2;
690         ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
691         if (ret) {
692                 DRV_LOG(ERR, "Failed to query sample IDs.");
693                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
694         }
695         prf->offset[0] = 0x0;
696         prf->offset[1] = sizeof(uint32_t);
697         prf->ids[0] = ids[0];
698         prf->ids[1] = ids[1];
699         return 0;
700 }
701
702 /*
703  * Destroy the flex parser node, including the parser itself, input / output
704  * arcs and DW samples. Resources could be reused then.
705  *
706  * @param dev
707  *   Pointer to Ethernet device structure.
708  */
709 static void
710 mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
711 {
712         struct mlx5_priv *priv = dev->data->dev_private;
713         struct mlx5_flex_parser_profiles *prf =
714                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
715
716         if (prf->obj)
717                 mlx5_devx_cmd_destroy(prf->obj);
718         prf->obj = NULL;
719 }
720
721 /*
722  * Allocate Rx and Tx UARs in robust fashion.
723  * This routine handles the following UAR allocation issues:
724  *
725  *  - tries to allocate the UAR with the most appropriate memory
726  *    mapping type from the ones supported by the host
727  *
728  *  - tries to allocate the UAR with non-NULL base address
729  *    OFED 5.0.x and Upstream rdma_core before v29 returned the NULL as
730  *    UAR base address if UAR was not the first object in the UAR page.
731  *    It caused the PMD failure and we should try to get another UAR
732  *    till we get the first one with non-NULL base address returned.
733  */
734 static int
735 mlx5_alloc_rxtx_uars(struct mlx5_dev_ctx_shared *sh,
736                      const struct mlx5_dev_config *config)
737 {
738         uint32_t uar_mapping, retry;
739         int err = 0;
740         void *base_addr;
741
742         for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
743 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
744                 /* Control the mapping type according to the settings. */
745                 uar_mapping = (config->dbnc == MLX5_TXDB_NCACHED) ?
746                               MLX5DV_UAR_ALLOC_TYPE_NC :
747                               MLX5DV_UAR_ALLOC_TYPE_BF;
748 #else
749                 RTE_SET_USED(config);
750                 /*
751                  * It seems we have no way to control the memory mapping type
752                  * for the UAR, the default "Write-Combining" type is supposed.
753                  * The UAR initialization on queue creation queries the
754                  * actual mapping type done by Verbs/kernel and setups the
755                  * PMD datapath accordingly.
756                  */
757                 uar_mapping = 0;
758 #endif
759                 sh->tx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, uar_mapping);
760 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
761                 if (!sh->tx_uar &&
762                     uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
763                         if (config->dbnc == MLX5_TXDB_CACHED ||
764                             config->dbnc == MLX5_TXDB_HEURISTIC)
765                                 DRV_LOG(WARNING, "Devarg tx_db_nc setting "
766                                                  "is not supported by DevX");
767                         /*
768                          * In some environments like virtual machine
769                          * the Write Combining mapped might be not supported
770                          * and UAR allocation fails. We try "Non-Cached"
771                          * mapping for the case. The tx_burst routines take
772                          * the UAR mapping type into account on UAR setup
773                          * on queue creation.
774                          */
775                         DRV_LOG(WARNING, "Failed to allocate Tx DevX UAR (BF)");
776                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
777                         sh->tx_uar = mlx5_glue->devx_alloc_uar
778                                                         (sh->ctx, uar_mapping);
779                 } else if (!sh->tx_uar &&
780                            uar_mapping == MLX5DV_UAR_ALLOC_TYPE_NC) {
781                         if (config->dbnc == MLX5_TXDB_NCACHED)
782                                 DRV_LOG(WARNING, "Devarg tx_db_nc settings "
783                                                  "is not supported by DevX");
784                         /*
785                          * If Verbs/kernel does not support "Non-Cached"
786                          * try the "Write-Combining".
787                          */
788                         DRV_LOG(WARNING, "Failed to allocate Tx DevX UAR (NC)");
789                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_BF;
790                         sh->tx_uar = mlx5_glue->devx_alloc_uar
791                                                         (sh->ctx, uar_mapping);
792                 }
793 #endif
794                 if (!sh->tx_uar) {
795                         DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (BF/NC)");
796                         err = ENOMEM;
797                         goto exit;
798                 }
799                 base_addr = mlx5_os_get_devx_uar_base_addr(sh->tx_uar);
800                 if (base_addr)
801                         break;
802                 /*
803                  * The UARs are allocated by rdma_core within the
804                  * IB device context, on context closure all UARs
805                  * will be freed, should be no memory/object leakage.
806                  */
807                 DRV_LOG(WARNING, "Retrying to allocate Tx DevX UAR");
808                 sh->tx_uar = NULL;
809         }
810         /* Check whether we finally succeeded with valid UAR allocation. */
811         if (!sh->tx_uar) {
812                 DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (NULL base)");
813                 err = ENOMEM;
814                 goto exit;
815         }
816         for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
817                 uar_mapping = 0;
818                 sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
819                                                         (sh->ctx, uar_mapping);
820 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
821                 if (!sh->devx_rx_uar &&
822                     uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
823                         /*
824                          * Rx UAR is used to control interrupts only,
825                          * should be no datapath noticeable impact,
826                          * can try "Non-Cached" mapping safely.
827                          */
828                         DRV_LOG(WARNING, "Failed to allocate Rx DevX UAR (BF)");
829                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
830                         sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
831                                                         (sh->ctx, uar_mapping);
832                 }
833 #endif
834                 if (!sh->devx_rx_uar) {
835                         DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (BF/NC)");
836                         err = ENOMEM;
837                         goto exit;
838                 }
839                 base_addr = mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar);
840                 if (base_addr)
841                         break;
842                 /*
843                  * The UARs are allocated by rdma_core within the
844                  * IB device context, on context closure all UARs
845                  * will be freed, should be no memory/object leakage.
846                  */
847                 DRV_LOG(WARNING, "Retrying to allocate Rx DevX UAR");
848                 sh->devx_rx_uar = NULL;
849         }
850         /* Check whether we finally succeeded with valid UAR allocation. */
851         if (!sh->devx_rx_uar) {
852                 DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (NULL base)");
853                 err = ENOMEM;
854         }
855 exit:
856         return err;
857 }
858
859 /**
860  * Allocate shared device context. If there is multiport device the
861  * master and representors will share this context, if there is single
862  * port dedicated device, the context will be used by only given
863  * port due to unification.
864  *
865  * Routine first searches the context for the specified device name,
866  * if found the shared context assumed and reference counter is incremented.
867  * If no context found the new one is created and initialized with specified
868  * device context and parameters.
869  *
870  * @param[in] spawn
871  *   Pointer to the device attributes (name, port, etc).
872  * @param[in] config
873  *   Pointer to device configuration structure.
874  *
875  * @return
876  *   Pointer to mlx5_dev_ctx_shared object on success,
877  *   otherwise NULL and rte_errno is set.
878  */
879 struct mlx5_dev_ctx_shared *
880 mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
881                            const struct mlx5_dev_config *config)
882 {
883         struct mlx5_dev_ctx_shared *sh;
884         int err = 0;
885         uint32_t i;
886         struct mlx5_devx_tis_attr tis_attr = { 0 };
887
888         MLX5_ASSERT(spawn);
889         /* Secondary process should not create the shared context. */
890         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
891         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
892         /* Search for IB context by device name. */
893         LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
894                 if (!strcmp(sh->ibdev_name,
895                         mlx5_os_get_dev_device_name(spawn->phys_dev))) {
896                         sh->refcnt++;
897                         goto exit;
898                 }
899         }
900         /* No device found, we have to create new shared context. */
901         MLX5_ASSERT(spawn->max_port);
902         sh = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
903                          sizeof(struct mlx5_dev_ctx_shared) +
904                          spawn->max_port *
905                          sizeof(struct mlx5_dev_shared_port),
906                          RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
907         if (!sh) {
908                 DRV_LOG(ERR, "shared context allocation failure");
909                 rte_errno  = ENOMEM;
910                 goto exit;
911         }
912         err = mlx5_os_open_device(spawn, config, sh);
913         if (!sh->ctx)
914                 goto error;
915         err = mlx5_os_get_dev_attr(sh->ctx, &sh->device_attr);
916         if (err) {
917                 DRV_LOG(DEBUG, "mlx5_os_get_dev_attr() failed");
918                 goto error;
919         }
920         sh->refcnt = 1;
921         sh->bond_dev = UINT16_MAX;
922         sh->max_port = spawn->max_port;
923         strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->ctx),
924                 sizeof(sh->ibdev_name) - 1);
925         strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->ctx),
926                 sizeof(sh->ibdev_path) - 1);
927         /*
928          * Setting port_id to max unallowed value means
929          * there is no interrupt subhandler installed for
930          * the given port index i.
931          */
932         for (i = 0; i < sh->max_port; i++) {
933                 sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
934                 sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
935         }
936         sh->pd = mlx5_os_alloc_pd(sh->ctx);
937         if (sh->pd == NULL) {
938                 DRV_LOG(ERR, "PD allocation failure");
939                 err = ENOMEM;
940                 goto error;
941         }
942         if (sh->devx) {
943                 /* Query the EQN for this core. */
944                 err = mlx5_glue->devx_query_eqn(sh->ctx, 0, &sh->eqn);
945                 if (err) {
946                         rte_errno = errno;
947                         DRV_LOG(ERR, "Failed to query event queue number %d.",
948                                 rte_errno);
949                         goto error;
950                 }
951                 err = mlx5_os_get_pdn(sh->pd, &sh->pdn);
952                 if (err) {
953                         DRV_LOG(ERR, "Fail to extract pdn from PD");
954                         goto error;
955                 }
956                 sh->td = mlx5_devx_cmd_create_td(sh->ctx);
957                 if (!sh->td) {
958                         DRV_LOG(ERR, "TD allocation failure");
959                         err = ENOMEM;
960                         goto error;
961                 }
962                 tis_attr.transport_domain = sh->td->id;
963                 sh->tis = mlx5_devx_cmd_create_tis(sh->ctx, &tis_attr);
964                 if (!sh->tis) {
965                         DRV_LOG(ERR, "TIS allocation failure");
966                         err = ENOMEM;
967                         goto error;
968                 }
969                 err = mlx5_alloc_rxtx_uars(sh, config);
970                 if (err)
971                         goto error;
972                 MLX5_ASSERT(sh->tx_uar);
973                 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar));
974
975                 MLX5_ASSERT(sh->devx_rx_uar);
976                 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar));
977         }
978 #ifndef RTE_ARCH_64
979         /* Initialize UAR access locks for 32bit implementations. */
980         rte_spinlock_init(&sh->uar_lock_cq);
981         for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
982                 rte_spinlock_init(&sh->uar_lock[i]);
983 #endif
984         /*
985          * Once the device is added to the list of memory event
986          * callback, its global MR cache table cannot be expanded
987          * on the fly because of deadlock. If it overflows, lookup
988          * should be done by searching MR list linearly, which is slow.
989          *
990          * At this point the device is not added to the memory
991          * event list yet, context is just being created.
992          */
993         err = mlx5_mr_btree_init(&sh->share_cache.cache,
994                                  MLX5_MR_BTREE_CACHE_N * 2,
995                                  spawn->pci_dev->device.numa_node);
996         if (err) {
997                 err = rte_errno;
998                 goto error;
999         }
1000         mlx5_os_set_reg_mr_cb(&sh->share_cache.reg_mr_cb,
1001                               &sh->share_cache.dereg_mr_cb);
1002         mlx5_os_dev_shared_handler_install(sh);
1003         sh->cnt_id_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_DWORD);
1004         if (!sh->cnt_id_tbl) {
1005                 err = rte_errno;
1006                 goto error;
1007         }
1008         mlx5_flow_aging_init(sh);
1009         mlx5_flow_counters_mng_init(sh);
1010         mlx5_flow_ipool_create(sh, config);
1011         /* Add device to memory callback list. */
1012         rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1013         LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
1014                          sh, mem_event_cb);
1015         rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1016         /* Add context to the global device list. */
1017         LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
1018 exit:
1019         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1020         return sh;
1021 error:
1022         pthread_mutex_destroy(&sh->txpp.mutex);
1023         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1024         MLX5_ASSERT(sh);
1025         if (sh->cnt_id_tbl)
1026                 mlx5_l3t_destroy(sh->cnt_id_tbl);
1027         if (sh->tis)
1028                 claim_zero(mlx5_devx_cmd_destroy(sh->tis));
1029         if (sh->td)
1030                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1031         if (sh->devx_rx_uar)
1032                 mlx5_glue->devx_free_uar(sh->devx_rx_uar);
1033         if (sh->tx_uar)
1034                 mlx5_glue->devx_free_uar(sh->tx_uar);
1035         if (sh->pd)
1036                 claim_zero(mlx5_os_dealloc_pd(sh->pd));
1037         if (sh->ctx)
1038                 claim_zero(mlx5_glue->close_device(sh->ctx));
1039         mlx5_free(sh);
1040         MLX5_ASSERT(err > 0);
1041         rte_errno = err;
1042         return NULL;
1043 }
1044
1045 /**
1046  * Free shared IB device context. Decrement counter and if zero free
1047  * all allocated resources and close handles.
1048  *
1049  * @param[in] sh
1050  *   Pointer to mlx5_dev_ctx_shared object to free
1051  */
1052 void
1053 mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
1054 {
1055         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1056 #ifdef RTE_LIBRTE_MLX5_DEBUG
1057         /* Check the object presence in the list. */
1058         struct mlx5_dev_ctx_shared *lctx;
1059
1060         LIST_FOREACH(lctx, &mlx5_dev_ctx_list, next)
1061                 if (lctx == sh)
1062                         break;
1063         MLX5_ASSERT(lctx);
1064         if (lctx != sh) {
1065                 DRV_LOG(ERR, "Freeing non-existing shared IB context");
1066                 goto exit;
1067         }
1068 #endif
1069         MLX5_ASSERT(sh);
1070         MLX5_ASSERT(sh->refcnt);
1071         /* Secondary process should not free the shared context. */
1072         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1073         if (--sh->refcnt)
1074                 goto exit;
1075         /* Remove from memory callback device list. */
1076         rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1077         LIST_REMOVE(sh, mem_event_cb);
1078         rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1079         /* Release created Memory Regions. */
1080         mlx5_mr_release_cache(&sh->share_cache);
1081         /* Remove context from the global device list. */
1082         LIST_REMOVE(sh, next);
1083         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1084         /*
1085          *  Ensure there is no async event handler installed.
1086          *  Only primary process handles async device events.
1087          **/
1088         mlx5_flow_counters_mng_close(sh);
1089         if (sh->aso_age_mng) {
1090                 mlx5_flow_aso_age_mng_close(sh);
1091                 sh->aso_age_mng = NULL;
1092         }
1093         mlx5_flow_ipool_destroy(sh);
1094         mlx5_os_dev_shared_handler_uninstall(sh);
1095         if (sh->cnt_id_tbl) {
1096                 mlx5_l3t_destroy(sh->cnt_id_tbl);
1097                 sh->cnt_id_tbl = NULL;
1098         }
1099         if (sh->tx_uar) {
1100                 mlx5_glue->devx_free_uar(sh->tx_uar);
1101                 sh->tx_uar = NULL;
1102         }
1103         if (sh->pd)
1104                 claim_zero(mlx5_os_dealloc_pd(sh->pd));
1105         if (sh->tis)
1106                 claim_zero(mlx5_devx_cmd_destroy(sh->tis));
1107         if (sh->td)
1108                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1109         if (sh->devx_rx_uar)
1110                 mlx5_glue->devx_free_uar(sh->devx_rx_uar);
1111         if (sh->ctx)
1112                 claim_zero(mlx5_glue->close_device(sh->ctx));
1113         pthread_mutex_destroy(&sh->txpp.mutex);
1114         mlx5_free(sh);
1115         return;
1116 exit:
1117         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1118 }
1119
1120 /**
1121  * Destroy table hash list.
1122  *
1123  * @param[in] priv
1124  *   Pointer to the private device data structure.
1125  */
1126 void
1127 mlx5_free_table_hash_list(struct mlx5_priv *priv)
1128 {
1129         struct mlx5_dev_ctx_shared *sh = priv->sh;
1130
1131         if (!sh->flow_tbls)
1132                 return;
1133         mlx5_hlist_destroy(sh->flow_tbls);
1134 }
1135
1136 /**
1137  * Initialize flow table hash list and create the root tables entry
1138  * for each domain.
1139  *
1140  * @param[in] priv
1141  *   Pointer to the private device data structure.
1142  *
1143  * @return
1144  *   Zero on success, positive error code otherwise.
1145  */
1146 int
1147 mlx5_alloc_table_hash_list(struct mlx5_priv *priv __rte_unused)
1148 {
1149         int err = 0;
1150         /* Tables are only used in DV and DR modes. */
1151 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
1152         struct mlx5_dev_ctx_shared *sh = priv->sh;
1153         char s[MLX5_HLIST_NAMESIZE];
1154
1155         MLX5_ASSERT(sh);
1156         snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
1157         sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
1158                                           0, 0, flow_dv_tbl_create_cb,
1159                                           flow_dv_tbl_match_cb,
1160                                           flow_dv_tbl_remove_cb);
1161         if (!sh->flow_tbls) {
1162                 DRV_LOG(ERR, "flow tables with hash creation failed.");
1163                 err = ENOMEM;
1164                 return err;
1165         }
1166         sh->flow_tbls->ctx = sh;
1167 #ifndef HAVE_MLX5DV_DR
1168         struct rte_flow_error error;
1169         struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
1170
1171         /*
1172          * In case we have not DR support, the zero tables should be created
1173          * because DV expect to see them even if they cannot be created by
1174          * RDMA-CORE.
1175          */
1176         if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0, NULL, 0, 1, &error) ||
1177             !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0, NULL, 0, 1, &error) ||
1178             !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0, NULL, 0, 1, &error)) {
1179                 err = ENOMEM;
1180                 goto error;
1181         }
1182         return err;
1183 error:
1184         mlx5_free_table_hash_list(priv);
1185 #endif /* HAVE_MLX5DV_DR */
1186 #endif
1187         return err;
1188 }
1189
1190 /**
1191  * Retrieve integer value from environment variable.
1192  *
1193  * @param[in] name
1194  *   Environment variable name.
1195  *
1196  * @return
1197  *   Integer value, 0 if the variable is not set.
1198  */
1199 int
1200 mlx5_getenv_int(const char *name)
1201 {
1202         const char *val = getenv(name);
1203
1204         if (val == NULL)
1205                 return 0;
1206         return atoi(val);
1207 }
1208
1209 /**
1210  * DPDK callback to add udp tunnel port
1211  *
1212  * @param[in] dev
1213  *   A pointer to eth_dev
1214  * @param[in] udp_tunnel
1215  *   A pointer to udp tunnel
1216  *
1217  * @return
1218  *   0 on valid udp ports and tunnels, -ENOTSUP otherwise.
1219  */
1220 int
1221 mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
1222                          struct rte_eth_udp_tunnel *udp_tunnel)
1223 {
1224         MLX5_ASSERT(udp_tunnel != NULL);
1225         if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
1226             udp_tunnel->udp_port == 4789)
1227                 return 0;
1228         if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
1229             udp_tunnel->udp_port == 4790)
1230                 return 0;
1231         return -ENOTSUP;
1232 }
1233
1234 /**
1235  * Initialize process private data structure.
1236  *
1237  * @param dev
1238  *   Pointer to Ethernet device structure.
1239  *
1240  * @return
1241  *   0 on success, a negative errno value otherwise and rte_errno is set.
1242  */
1243 int
1244 mlx5_proc_priv_init(struct rte_eth_dev *dev)
1245 {
1246         struct mlx5_priv *priv = dev->data->dev_private;
1247         struct mlx5_proc_priv *ppriv;
1248         size_t ppriv_size;
1249
1250         /*
1251          * UAR register table follows the process private structure. BlueFlame
1252          * registers for Tx queues are stored in the table.
1253          */
1254         ppriv_size =
1255                 sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
1256         ppriv = mlx5_malloc(MLX5_MEM_RTE, ppriv_size, RTE_CACHE_LINE_SIZE,
1257                             dev->device->numa_node);
1258         if (!ppriv) {
1259                 rte_errno = ENOMEM;
1260                 return -rte_errno;
1261         }
1262         ppriv->uar_table_sz = ppriv_size;
1263         dev->process_private = ppriv;
1264         return 0;
1265 }
1266
1267 /**
1268  * Un-initialize process private data structure.
1269  *
1270  * @param dev
1271  *   Pointer to Ethernet device structure.
1272  */
1273 static void
1274 mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
1275 {
1276         if (!dev->process_private)
1277                 return;
1278         mlx5_free(dev->process_private);
1279         dev->process_private = NULL;
1280 }
1281
1282 /**
1283  * DPDK callback to close the device.
1284  *
1285  * Destroy all queues and objects, free memory.
1286  *
1287  * @param dev
1288  *   Pointer to Ethernet device structure.
1289  */
1290 int
1291 mlx5_dev_close(struct rte_eth_dev *dev)
1292 {
1293         struct mlx5_priv *priv = dev->data->dev_private;
1294         unsigned int i;
1295         int ret;
1296
1297         if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1298                 /* Check if process_private released. */
1299                 if (!dev->process_private)
1300                         return 0;
1301                 mlx5_tx_uar_uninit_secondary(dev);
1302                 mlx5_proc_priv_uninit(dev);
1303                 rte_eth_dev_release_port(dev);
1304                 return 0;
1305         }
1306         if (!priv->sh)
1307                 return 0;
1308         DRV_LOG(DEBUG, "port %u closing device \"%s\"",
1309                 dev->data->port_id,
1310                 ((priv->sh->ctx != NULL) ?
1311                 mlx5_os_get_ctx_device_name(priv->sh->ctx) : ""));
1312         /*
1313          * If default mreg copy action is removed at the stop stage,
1314          * the search will return none and nothing will be done anymore.
1315          */
1316         mlx5_flow_stop_default(dev);
1317         mlx5_traffic_disable(dev);
1318         /*
1319          * If all the flows are already flushed in the device stop stage,
1320          * then this will return directly without any action.
1321          */
1322         mlx5_flow_list_flush(dev, &priv->flows, true);
1323         mlx5_shared_action_flush(dev);
1324         mlx5_flow_meter_flush(dev, NULL);
1325         /* Prevent crashes when queues are still in use. */
1326         dev->rx_pkt_burst = removed_rx_burst;
1327         dev->tx_pkt_burst = removed_tx_burst;
1328         rte_wmb();
1329         /* Disable datapath on secondary process. */
1330         mlx5_mp_os_req_stop_rxtx(dev);
1331         /* Free the eCPRI flex parser resource. */
1332         mlx5_flex_parser_ecpri_release(dev);
1333         if (priv->rxqs != NULL) {
1334                 /* XXX race condition if mlx5_rx_burst() is still running. */
1335                 rte_delay_us_sleep(1000);
1336                 for (i = 0; (i != priv->rxqs_n); ++i)
1337                         mlx5_rxq_release(dev, i);
1338                 priv->rxqs_n = 0;
1339                 priv->rxqs = NULL;
1340         }
1341         if (priv->txqs != NULL) {
1342                 /* XXX race condition if mlx5_tx_burst() is still running. */
1343                 rte_delay_us_sleep(1000);
1344                 for (i = 0; (i != priv->txqs_n); ++i)
1345                         mlx5_txq_release(dev, i);
1346                 priv->txqs_n = 0;
1347                 priv->txqs = NULL;
1348         }
1349         mlx5_proc_priv_uninit(dev);
1350         if (priv->drop_queue.hrxq)
1351                 mlx5_drop_action_destroy(dev);
1352         if (priv->mreg_cp_tbl)
1353                 mlx5_hlist_destroy(priv->mreg_cp_tbl);
1354         mlx5_mprq_free_mp(dev);
1355         mlx5_os_free_shared_dr(priv);
1356         if (priv->rss_conf.rss_key != NULL)
1357                 mlx5_free(priv->rss_conf.rss_key);
1358         if (priv->reta_idx != NULL)
1359                 mlx5_free(priv->reta_idx);
1360         if (priv->config.vf)
1361                 mlx5_os_mac_addr_flush(dev);
1362         if (priv->nl_socket_route >= 0)
1363                 close(priv->nl_socket_route);
1364         if (priv->nl_socket_rdma >= 0)
1365                 close(priv->nl_socket_rdma);
1366         if (priv->vmwa_context)
1367                 mlx5_vlan_vmwa_exit(priv->vmwa_context);
1368         ret = mlx5_hrxq_verify(dev);
1369         if (ret)
1370                 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
1371                         dev->data->port_id);
1372         ret = mlx5_ind_table_obj_verify(dev);
1373         if (ret)
1374                 DRV_LOG(WARNING, "port %u some indirection table still remain",
1375                         dev->data->port_id);
1376         ret = mlx5_rxq_obj_verify(dev);
1377         if (ret)
1378                 DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
1379                         dev->data->port_id);
1380         ret = mlx5_rxq_verify(dev);
1381         if (ret)
1382                 DRV_LOG(WARNING, "port %u some Rx queues still remain",
1383                         dev->data->port_id);
1384         ret = mlx5_txq_obj_verify(dev);
1385         if (ret)
1386                 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
1387                         dev->data->port_id);
1388         ret = mlx5_txq_verify(dev);
1389         if (ret)
1390                 DRV_LOG(WARNING, "port %u some Tx queues still remain",
1391                         dev->data->port_id);
1392         ret = mlx5_flow_verify(dev);
1393         if (ret)
1394                 DRV_LOG(WARNING, "port %u some flows still remain",
1395                         dev->data->port_id);
1396         mlx5_cache_list_destroy(&priv->hrxqs);
1397         /*
1398          * Free the shared context in last turn, because the cleanup
1399          * routines above may use some shared fields, like
1400          * mlx5_os_mac_addr_flush() uses ibdev_path for retrieveing
1401          * ifindex if Netlink fails.
1402          */
1403         mlx5_free_shared_dev_ctx(priv->sh);
1404         if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1405                 unsigned int c = 0;
1406                 uint16_t port_id;
1407
1408                 MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
1409                         struct mlx5_priv *opriv =
1410                                 rte_eth_devices[port_id].data->dev_private;
1411
1412                         if (!opriv ||
1413                             opriv->domain_id != priv->domain_id ||
1414                             &rte_eth_devices[port_id] == dev)
1415                                 continue;
1416                         ++c;
1417                         break;
1418                 }
1419                 if (!c)
1420                         claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1421         }
1422         memset(priv, 0, sizeof(*priv));
1423         priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1424         /*
1425          * Reset mac_addrs to NULL such that it is not freed as part of
1426          * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
1427          * it is freed when dev_private is freed.
1428          */
1429         dev->data->mac_addrs = NULL;
1430         return 0;
1431 }
1432
1433 /**
1434  * Verify and store value for device argument.
1435  *
1436  * @param[in] key
1437  *   Key argument to verify.
1438  * @param[in] val
1439  *   Value associated with key.
1440  * @param opaque
1441  *   User data.
1442  *
1443  * @return
1444  *   0 on success, a negative errno value otherwise and rte_errno is set.
1445  */
1446 static int
1447 mlx5_args_check(const char *key, const char *val, void *opaque)
1448 {
1449         struct mlx5_dev_config *config = opaque;
1450         unsigned long mod;
1451         signed long tmp;
1452
1453         /* No-op, port representors are processed in mlx5_dev_spawn(). */
1454         if (!strcmp(MLX5_REPRESENTOR, key))
1455                 return 0;
1456         errno = 0;
1457         tmp = strtol(val, NULL, 0);
1458         if (errno) {
1459                 rte_errno = errno;
1460                 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
1461                 return -rte_errno;
1462         }
1463         if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
1464                 /* Negative values are acceptable for some keys only. */
1465                 rte_errno = EINVAL;
1466                 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
1467                 return -rte_errno;
1468         }
1469         mod = tmp >= 0 ? tmp : -tmp;
1470         if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
1471                 if (tmp > MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
1472                         DRV_LOG(ERR, "invalid CQE compression "
1473                                      "format parameter");
1474                         rte_errno = EINVAL;
1475                         return -rte_errno;
1476                 }
1477                 config->cqe_comp = !!tmp;
1478                 config->cqe_comp_fmt = tmp;
1479         } else if (strcmp(MLX5_RXQ_CQE_PAD_EN, key) == 0) {
1480                 config->cqe_pad = !!tmp;
1481         } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
1482                 config->hw_padding = !!tmp;
1483         } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
1484                 config->mprq.enabled = !!tmp;
1485         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
1486                 config->mprq.stride_num_n = tmp;
1487         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
1488                 config->mprq.stride_size_n = tmp;
1489         } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
1490                 config->mprq.max_memcpy_len = tmp;
1491         } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
1492                 config->mprq.min_rxqs_num = tmp;
1493         } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
1494                 DRV_LOG(WARNING, "%s: deprecated parameter,"
1495                                  " converted to txq_inline_max", key);
1496                 config->txq_inline_max = tmp;
1497         } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
1498                 config->txq_inline_max = tmp;
1499         } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
1500                 config->txq_inline_min = tmp;
1501         } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
1502                 config->txq_inline_mpw = tmp;
1503         } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
1504                 config->txqs_inline = tmp;
1505         } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
1506                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1507         } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
1508                 config->mps = !!tmp;
1509         } else if (strcmp(MLX5_TX_DB_NC, key) == 0) {
1510                 if (tmp != MLX5_TXDB_CACHED &&
1511                     tmp != MLX5_TXDB_NCACHED &&
1512                     tmp != MLX5_TXDB_HEURISTIC) {
1513                         DRV_LOG(ERR, "invalid Tx doorbell "
1514                                      "mapping parameter");
1515                         rte_errno = EINVAL;
1516                         return -rte_errno;
1517                 }
1518                 config->dbnc = tmp;
1519         } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
1520                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1521         } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
1522                 DRV_LOG(WARNING, "%s: deprecated parameter,"
1523                                  " converted to txq_inline_mpw", key);
1524                 config->txq_inline_mpw = tmp;
1525         } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
1526                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1527         } else if (strcmp(MLX5_TX_PP, key) == 0) {
1528                 if (!mod) {
1529                         DRV_LOG(ERR, "Zero Tx packet pacing parameter");
1530                         rte_errno = EINVAL;
1531                         return -rte_errno;
1532                 }
1533                 config->tx_pp = tmp;
1534         } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
1535                 config->tx_skew = tmp;
1536         } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
1537                 config->rx_vec_en = !!tmp;
1538         } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
1539                 config->l3_vxlan_en = !!tmp;
1540         } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
1541                 config->vf_nl_en = !!tmp;
1542         } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
1543                 config->dv_esw_en = !!tmp;
1544         } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
1545                 config->dv_flow_en = !!tmp;
1546         } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
1547                 if (tmp != MLX5_XMETA_MODE_LEGACY &&
1548                     tmp != MLX5_XMETA_MODE_META16 &&
1549                     tmp != MLX5_XMETA_MODE_META32 &&
1550                     tmp != MLX5_XMETA_MODE_MISS_INFO) {
1551                         DRV_LOG(ERR, "invalid extensive "
1552                                      "metadata parameter");
1553                         rte_errno = EINVAL;
1554                         return -rte_errno;
1555                 }
1556                 if (tmp != MLX5_XMETA_MODE_MISS_INFO)
1557                         config->dv_xmeta_en = tmp;
1558                 else
1559                         config->dv_miss_info = 1;
1560         } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
1561                 config->lacp_by_user = !!tmp;
1562         } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
1563                 config->mr_ext_memseg_en = !!tmp;
1564         } else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
1565                 config->max_dump_files_num = tmp;
1566         } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
1567                 config->lro.timeout = tmp;
1568         } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) {
1569                 DRV_LOG(DEBUG, "class argument is %s.", val);
1570         } else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
1571                 config->log_hp_size = tmp;
1572         } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
1573                 if (tmp != MLX5_RCM_NONE &&
1574                     tmp != MLX5_RCM_LIGHT &&
1575                     tmp != MLX5_RCM_AGGR) {
1576                         DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
1577                         rte_errno = EINVAL;
1578                         return -rte_errno;
1579                 }
1580                 config->reclaim_mode = tmp;
1581         } else if (strcmp(MLX5_SYS_MEM_EN, key) == 0) {
1582                 config->sys_mem_en = !!tmp;
1583         } else if (strcmp(MLX5_DECAP_EN, key) == 0) {
1584                 config->decap_en = !!tmp;
1585         } else {
1586                 DRV_LOG(WARNING, "%s: unknown parameter", key);
1587                 rte_errno = EINVAL;
1588                 return -rte_errno;
1589         }
1590         return 0;
1591 }
1592
1593 /**
1594  * Parse device parameters.
1595  *
1596  * @param config
1597  *   Pointer to device configuration structure.
1598  * @param devargs
1599  *   Device arguments structure.
1600  *
1601  * @return
1602  *   0 on success, a negative errno value otherwise and rte_errno is set.
1603  */
1604 int
1605 mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
1606 {
1607         const char **params = (const char *[]){
1608                 MLX5_RXQ_CQE_COMP_EN,
1609                 MLX5_RXQ_CQE_PAD_EN,
1610                 MLX5_RXQ_PKT_PAD_EN,
1611                 MLX5_RX_MPRQ_EN,
1612                 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
1613                 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
1614                 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
1615                 MLX5_RXQS_MIN_MPRQ,
1616                 MLX5_TXQ_INLINE,
1617                 MLX5_TXQ_INLINE_MIN,
1618                 MLX5_TXQ_INLINE_MAX,
1619                 MLX5_TXQ_INLINE_MPW,
1620                 MLX5_TXQS_MIN_INLINE,
1621                 MLX5_TXQS_MAX_VEC,
1622                 MLX5_TXQ_MPW_EN,
1623                 MLX5_TXQ_MPW_HDR_DSEG_EN,
1624                 MLX5_TXQ_MAX_INLINE_LEN,
1625                 MLX5_TX_DB_NC,
1626                 MLX5_TX_PP,
1627                 MLX5_TX_SKEW,
1628                 MLX5_TX_VEC_EN,
1629                 MLX5_RX_VEC_EN,
1630                 MLX5_L3_VXLAN_EN,
1631                 MLX5_VF_NL_EN,
1632                 MLX5_DV_ESW_EN,
1633                 MLX5_DV_FLOW_EN,
1634                 MLX5_DV_XMETA_EN,
1635                 MLX5_LACP_BY_USER,
1636                 MLX5_MR_EXT_MEMSEG_EN,
1637                 MLX5_REPRESENTOR,
1638                 MLX5_MAX_DUMP_FILES_NUM,
1639                 MLX5_LRO_TIMEOUT_USEC,
1640                 MLX5_CLASS_ARG_NAME,
1641                 MLX5_HP_BUF_SIZE,
1642                 MLX5_RECLAIM_MEM,
1643                 MLX5_SYS_MEM_EN,
1644                 MLX5_DECAP_EN,
1645                 NULL,
1646         };
1647         struct rte_kvargs *kvlist;
1648         int ret = 0;
1649         int i;
1650
1651         if (devargs == NULL)
1652                 return 0;
1653         /* Following UGLY cast is done to pass checkpatch. */
1654         kvlist = rte_kvargs_parse(devargs->args, params);
1655         if (kvlist == NULL) {
1656                 rte_errno = EINVAL;
1657                 return -rte_errno;
1658         }
1659         /* Process parameters. */
1660         for (i = 0; (params[i] != NULL); ++i) {
1661                 if (rte_kvargs_count(kvlist, params[i])) {
1662                         ret = rte_kvargs_process(kvlist, params[i],
1663                                                  mlx5_args_check, config);
1664                         if (ret) {
1665                                 rte_errno = EINVAL;
1666                                 rte_kvargs_free(kvlist);
1667                                 return -rte_errno;
1668                         }
1669                 }
1670         }
1671         rte_kvargs_free(kvlist);
1672         return 0;
1673 }
1674
1675 /**
1676  * Configures the minimal amount of data to inline into WQE
1677  * while sending packets.
1678  *
1679  * - the txq_inline_min has the maximal priority, if this
1680  *   key is specified in devargs
1681  * - if DevX is enabled the inline mode is queried from the
1682  *   device (HCA attributes and NIC vport context if needed).
1683  * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
1684  *   and none (0 bytes) for other NICs
1685  *
1686  * @param spawn
1687  *   Verbs device parameters (name, port, switch_info) to spawn.
1688  * @param config
1689  *   Device configuration parameters.
1690  */
1691 void
1692 mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
1693                     struct mlx5_dev_config *config)
1694 {
1695         if (config->txq_inline_min != MLX5_ARG_UNSET) {
1696                 /* Application defines size of inlined data explicitly. */
1697                 switch (spawn->pci_dev->id.device_id) {
1698                 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1699                 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1700                         if (config->txq_inline_min <
1701                                        (int)MLX5_INLINE_HSIZE_L2) {
1702                                 DRV_LOG(DEBUG,
1703                                         "txq_inline_mix aligned to minimal"
1704                                         " ConnectX-4 required value %d",
1705                                         (int)MLX5_INLINE_HSIZE_L2);
1706                                 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1707                         }
1708                         break;
1709                 }
1710                 goto exit;
1711         }
1712         if (config->hca_attr.eth_net_offloads) {
1713                 /* We have DevX enabled, inline mode queried successfully. */
1714                 switch (config->hca_attr.wqe_inline_mode) {
1715                 case MLX5_CAP_INLINE_MODE_L2:
1716                         /* outer L2 header must be inlined. */
1717                         config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1718                         goto exit;
1719                 case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
1720                         /* No inline data are required by NIC. */
1721                         config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1722                         config->hw_vlan_insert =
1723                                 config->hca_attr.wqe_vlan_insert;
1724                         DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
1725                         goto exit;
1726                 case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
1727                         /* inline mode is defined by NIC vport context. */
1728                         if (!config->hca_attr.eth_virt)
1729                                 break;
1730                         switch (config->hca_attr.vport_inline_mode) {
1731                         case MLX5_INLINE_MODE_NONE:
1732                                 config->txq_inline_min =
1733                                         MLX5_INLINE_HSIZE_NONE;
1734                                 goto exit;
1735                         case MLX5_INLINE_MODE_L2:
1736                                 config->txq_inline_min =
1737                                         MLX5_INLINE_HSIZE_L2;
1738                                 goto exit;
1739                         case MLX5_INLINE_MODE_IP:
1740                                 config->txq_inline_min =
1741                                         MLX5_INLINE_HSIZE_L3;
1742                                 goto exit;
1743                         case MLX5_INLINE_MODE_TCP_UDP:
1744                                 config->txq_inline_min =
1745                                         MLX5_INLINE_HSIZE_L4;
1746                                 goto exit;
1747                         case MLX5_INLINE_MODE_INNER_L2:
1748                                 config->txq_inline_min =
1749                                         MLX5_INLINE_HSIZE_INNER_L2;
1750                                 goto exit;
1751                         case MLX5_INLINE_MODE_INNER_IP:
1752                                 config->txq_inline_min =
1753                                         MLX5_INLINE_HSIZE_INNER_L3;
1754                                 goto exit;
1755                         case MLX5_INLINE_MODE_INNER_TCP_UDP:
1756                                 config->txq_inline_min =
1757                                         MLX5_INLINE_HSIZE_INNER_L4;
1758                                 goto exit;
1759                         }
1760                 }
1761         }
1762         /*
1763          * We get here if we are unable to deduce
1764          * inline data size with DevX. Try PCI ID
1765          * to determine old NICs.
1766          */
1767         switch (spawn->pci_dev->id.device_id) {
1768         case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1769         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1770         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
1771         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
1772                 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1773                 config->hw_vlan_insert = 0;
1774                 break;
1775         case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
1776         case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
1777         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
1778         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
1779                 /*
1780                  * These NICs support VLAN insertion from WQE and
1781                  * report the wqe_vlan_insert flag. But there is the bug
1782                  * and PFC control may be broken, so disable feature.
1783                  */
1784                 config->hw_vlan_insert = 0;
1785                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1786                 break;
1787         default:
1788                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1789                 break;
1790         }
1791 exit:
1792         DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
1793 }
1794
1795 /**
1796  * Configures the metadata mask fields in the shared context.
1797  *
1798  * @param [in] dev
1799  *   Pointer to Ethernet device.
1800  */
1801 void
1802 mlx5_set_metadata_mask(struct rte_eth_dev *dev)
1803 {
1804         struct mlx5_priv *priv = dev->data->dev_private;
1805         struct mlx5_dev_ctx_shared *sh = priv->sh;
1806         uint32_t meta, mark, reg_c0;
1807
1808         reg_c0 = ~priv->vport_meta_mask;
1809         switch (priv->config.dv_xmeta_en) {
1810         case MLX5_XMETA_MODE_LEGACY:
1811                 meta = UINT32_MAX;
1812                 mark = MLX5_FLOW_MARK_MASK;
1813                 break;
1814         case MLX5_XMETA_MODE_META16:
1815                 meta = reg_c0 >> rte_bsf32(reg_c0);
1816                 mark = MLX5_FLOW_MARK_MASK;
1817                 break;
1818         case MLX5_XMETA_MODE_META32:
1819                 meta = UINT32_MAX;
1820                 mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
1821                 break;
1822         default:
1823                 meta = 0;
1824                 mark = 0;
1825                 MLX5_ASSERT(false);
1826                 break;
1827         }
1828         if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
1829                 DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
1830                                  sh->dv_mark_mask, mark);
1831         else
1832                 sh->dv_mark_mask = mark;
1833         if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
1834                 DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
1835                                  sh->dv_meta_mask, meta);
1836         else
1837                 sh->dv_meta_mask = meta;
1838         if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
1839                 DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
1840                                  sh->dv_meta_mask, reg_c0);
1841         else
1842                 sh->dv_regc0_mask = reg_c0;
1843         DRV_LOG(DEBUG, "metadata mode %u", priv->config.dv_xmeta_en);
1844         DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
1845         DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
1846         DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
1847 }
1848
1849 int
1850 rte_pmd_mlx5_get_dyn_flag_names(char *names[], unsigned int n)
1851 {
1852         static const char *const dynf_names[] = {
1853                 RTE_PMD_MLX5_FINE_GRANULARITY_INLINE,
1854                 RTE_MBUF_DYNFLAG_METADATA_NAME,
1855                 RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME
1856         };
1857         unsigned int i;
1858
1859         if (n < RTE_DIM(dynf_names))
1860                 return -ENOMEM;
1861         for (i = 0; i < RTE_DIM(dynf_names); i++) {
1862                 if (names[i] == NULL)
1863                         return -EINVAL;
1864                 strcpy(names[i], dynf_names[i]);
1865         }
1866         return RTE_DIM(dynf_names);
1867 }
1868
1869 /**
1870  * Comparison callback to sort device data.
1871  *
1872  * This is meant to be used with qsort().
1873  *
1874  * @param a[in]
1875  *   Pointer to pointer to first data object.
1876  * @param b[in]
1877  *   Pointer to pointer to second data object.
1878  *
1879  * @return
1880  *   0 if both objects are equal, less than 0 if the first argument is less
1881  *   than the second, greater than 0 otherwise.
1882  */
1883 int
1884 mlx5_dev_check_sibling_config(struct mlx5_priv *priv,
1885                               struct mlx5_dev_config *config)
1886 {
1887         struct mlx5_dev_ctx_shared *sh = priv->sh;
1888         struct mlx5_dev_config *sh_conf = NULL;
1889         uint16_t port_id;
1890
1891         MLX5_ASSERT(sh);
1892         /* Nothing to compare for the single/first device. */
1893         if (sh->refcnt == 1)
1894                 return 0;
1895         /* Find the device with shared context. */
1896         MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
1897                 struct mlx5_priv *opriv =
1898                         rte_eth_devices[port_id].data->dev_private;
1899
1900                 if (opriv && opriv != priv && opriv->sh == sh) {
1901                         sh_conf = &opriv->config;
1902                         break;
1903                 }
1904         }
1905         if (!sh_conf)
1906                 return 0;
1907         if (sh_conf->dv_flow_en ^ config->dv_flow_en) {
1908                 DRV_LOG(ERR, "\"dv_flow_en\" configuration mismatch"
1909                              " for shared %s context", sh->ibdev_name);
1910                 rte_errno = EINVAL;
1911                 return rte_errno;
1912         }
1913         if (sh_conf->dv_xmeta_en ^ config->dv_xmeta_en) {
1914                 DRV_LOG(ERR, "\"dv_xmeta_en\" configuration mismatch"
1915                              " for shared %s context", sh->ibdev_name);
1916                 rte_errno = EINVAL;
1917                 return rte_errno;
1918         }
1919         return 0;
1920 }
1921
1922 /**
1923  * Look for the ethernet device belonging to mlx5 driver.
1924  *
1925  * @param[in] port_id
1926  *   port_id to start looking for device.
1927  * @param[in] pci_dev
1928  *   Pointer to the hint PCI device. When device is being probed
1929  *   the its siblings (master and preceding representors might
1930  *   not have assigned driver yet (because the mlx5_os_pci_probe()
1931  *   is not completed yet, for this case match on hint PCI
1932  *   device may be used to detect sibling device.
1933  *
1934  * @return
1935  *   port_id of found device, RTE_MAX_ETHPORT if not found.
1936  */
1937 uint16_t
1938 mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
1939 {
1940         while (port_id < RTE_MAX_ETHPORTS) {
1941                 struct rte_eth_dev *dev = &rte_eth_devices[port_id];
1942
1943                 if (dev->state != RTE_ETH_DEV_UNUSED &&
1944                     dev->device &&
1945                     (dev->device == &pci_dev->device ||
1946                      (dev->device->driver &&
1947                      dev->device->driver->name &&
1948                      !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))))
1949                         break;
1950                 port_id++;
1951         }
1952         if (port_id >= RTE_MAX_ETHPORTS)
1953                 return RTE_MAX_ETHPORTS;
1954         return port_id;
1955 }
1956
1957 /**
1958  * DPDK callback to remove a PCI device.
1959  *
1960  * This function removes all Ethernet devices belong to a given PCI device.
1961  *
1962  * @param[in] pci_dev
1963  *   Pointer to the PCI device.
1964  *
1965  * @return
1966  *   0 on success, the function cannot fail.
1967  */
1968 static int
1969 mlx5_pci_remove(struct rte_pci_device *pci_dev)
1970 {
1971         uint16_t port_id;
1972         int ret = 0;
1973
1974         RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
1975                 /*
1976                  * mlx5_dev_close() is not registered to secondary process,
1977                  * call the close function explicitly for secondary process.
1978                  */
1979                 if (rte_eal_process_type() == RTE_PROC_SECONDARY)
1980                         ret |= mlx5_dev_close(&rte_eth_devices[port_id]);
1981                 else
1982                         ret |= rte_eth_dev_close(port_id);
1983         }
1984         return ret == 0 ? 0 : -EIO;
1985 }
1986
1987 static const struct rte_pci_id mlx5_pci_id_map[] = {
1988         {
1989                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1990                                PCI_DEVICE_ID_MELLANOX_CONNECTX4)
1991         },
1992         {
1993                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1994                                PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
1995         },
1996         {
1997                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
1998                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
1999         },
2000         {
2001                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2002                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
2003         },
2004         {
2005                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2006                                PCI_DEVICE_ID_MELLANOX_CONNECTX5)
2007         },
2008         {
2009                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2010                                PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
2011         },
2012         {
2013                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2014                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
2015         },
2016         {
2017                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2018                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
2019         },
2020         {
2021                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2022                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
2023         },
2024         {
2025                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2026                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
2027         },
2028         {
2029                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2030                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6)
2031         },
2032         {
2033                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2034                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
2035         },
2036         {
2037                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2038                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
2039         },
2040         {
2041                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2042                                 PCI_DEVICE_ID_MELLANOX_CONNECTXVF)
2043         },
2044         {
2045                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2046                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
2047         },
2048         {
2049                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2050                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6LX)
2051         },
2052         {
2053                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2054                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7)
2055         },
2056         {
2057                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2058                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7BF)
2059         },
2060         {
2061                 .vendor_id = 0
2062         }
2063 };
2064
2065 static struct mlx5_pci_driver mlx5_driver = {
2066         .driver_class = MLX5_CLASS_NET,
2067         .pci_driver = {
2068                 .driver = {
2069                         .name = MLX5_DRIVER_NAME,
2070                 },
2071                 .id_table = mlx5_pci_id_map,
2072                 .probe = mlx5_os_pci_probe,
2073                 .remove = mlx5_pci_remove,
2074                 .dma_map = mlx5_dma_map,
2075                 .dma_unmap = mlx5_dma_unmap,
2076                 .drv_flags = PCI_DRV_FLAGS,
2077         },
2078 };
2079
2080 /* Initialize driver log type. */
2081 RTE_LOG_REGISTER(mlx5_logtype, pmd.net.mlx5, NOTICE)
2082
2083 /**
2084  * Driver initialization routine.
2085  */
2086 RTE_INIT(rte_mlx5_pmd_init)
2087 {
2088         mlx5_common_init();
2089         /* Build the static tables for Verbs conversion. */
2090         mlx5_set_ptype_table();
2091         mlx5_set_cksum_table();
2092         mlx5_set_swp_types_table();
2093         if (mlx5_glue)
2094                 mlx5_pci_driver_register(&mlx5_driver);
2095 }
2096
2097 RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
2098 RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
2099 RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");