drivers/net/mlx5/mlx5.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2015 6WIND S.A.
   3  * Copyright 2015 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stddef.h>
   7 #include <unistd.h>
   8 #include <string.h>
   9 #include <stdint.h>
  10 #include <stdlib.h>
  11 #include <errno.h>
  12
  13 #include <rte_malloc.h>
  14 #include <ethdev_driver.h>
  15 #include <ethdev_pci.h>
  16 #include <rte_pci.h>
  17 #include <rte_bus_pci.h>
  18 #include <rte_common.h>
  19 #include <rte_kvargs.h>
  20 #include <rte_rwlock.h>
  21 #include <rte_spinlock.h>
  22 #include <rte_string_fns.h>
  23 #include <rte_alarm.h>
  24 #include <rte_cycles.h>
  25
  26 #include <mlx5_glue.h>
  27 #include <mlx5_devx_cmds.h>
  28 #include <mlx5_common.h>
  29 #include <mlx5_common_os.h>
  30 #include <mlx5_common_mp.h>
  31 #include <mlx5_common_pci.h>
  32 #include <mlx5_malloc.h>
  33
  34 #include "mlx5_defs.h"
  35 #include "mlx5.h"
  36 #include "mlx5_utils.h"
  37 #include "mlx5_rxtx.h"
  38 #include "mlx5_autoconf.h"
  39 #include "mlx5_mr.h"
  40 #include "mlx5_flow.h"
  41 #include "mlx5_flow_os.h"
  42 #include "rte_pmd_mlx5.h"
  43
  44 /* Device parameter to enable RX completion queue compression. */
  45 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
  46
  47 /* Device parameter to enable padding Rx packet to cacheline size. */
  48 #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
  49
  50 /* Device parameter to enable Multi-Packet Rx queue. */
  51 #define MLX5_RX_MPRQ_EN "mprq_en"
  52
  53 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
  54 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
  55
  56 /* Device parameter to configure log 2 of the stride size for MPRQ. */
  57 #define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size"
  58
  59 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
  60 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
  61
  62 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
  63 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
  64
  65 /* Device parameter to configure inline send. Deprecated, ignored.*/
  66 #define MLX5_TXQ_INLINE "txq_inline"
  67
  68 /* Device parameter to limit packet size to inline with ordinary SEND. */
  69 #define MLX5_TXQ_INLINE_MAX "txq_inline_max"
  70
  71 /* Device parameter to configure minimal data size to inline. */
  72 #define MLX5_TXQ_INLINE_MIN "txq_inline_min"
  73
  74 /* Device parameter to limit packet size to inline with Enhanced MPW. */
  75 #define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
  76
  77 /*
  78  * Device parameter to configure the number of TX queues threshold for
  79  * enabling inline send.
  80  */
  81 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
  82
  83 /*
  84  * Device parameter to configure the number of TX queues threshold for
  85  * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
  86  */
  87 #define MLX5_TXQS_MAX_VEC "txqs_max_vec"
  88
  89 /* Device parameter to enable multi-packet send WQEs. */
  90 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
  91
  92 /*
  93  * Device parameter to force doorbell register mapping
  94  * to non-cahed region eliminating the extra write memory barrier.
  95  */
  96 #define MLX5_TX_DB_NC "tx_db_nc"
  97
  98 /*
  99  * Device parameter to include 2 dsegs in the title WQEBB.
 100  * Deprecated, ignored.
 101  */
 102 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
 103
 104 /*
 105  * Device parameter to limit the size of inlining packet.
 106  * Deprecated, ignored.
 107  */
 108 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
 109
 110 /*
 111  * Device parameter to enable Tx scheduling on timestamps
 112  * and specify the packet pacing granularity in nanoseconds.
 113  */
 114 #define MLX5_TX_PP "tx_pp"
 115
 116 /*
 117  * Device parameter to specify skew in nanoseconds on Tx datapath,
 118  * it represents the time between SQ start WQE processing and
 119  * appearing actual packet data on the wire.
 120  */
 121 #define MLX5_TX_SKEW "tx_skew"
 122
 123 /*
 124  * Device parameter to enable hardware Tx vector.
 125  * Deprecated, ignored (no vectorized Tx routines anymore).
 126  */
 127 #define MLX5_TX_VEC_EN "tx_vec_en"
 128
 129 /* Device parameter to enable hardware Rx vector. */
 130 #define MLX5_RX_VEC_EN "rx_vec_en"
 131
 132 /* Allow L3 VXLAN flow creation. */
 133 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
 134
 135 /* Activate DV E-Switch flow steering. */
 136 #define MLX5_DV_ESW_EN "dv_esw_en"
 137
 138 /* Activate DV flow steering. */
 139 #define MLX5_DV_FLOW_EN "dv_flow_en"
 140
 141 /* Enable extensive flow metadata support. */
 142 #define MLX5_DV_XMETA_EN "dv_xmeta_en"
 143
 144 /* Device parameter to let the user manage the lacp traffic of bonded device */
 145 #define MLX5_LACP_BY_USER "lacp_by_user"
 146
 147 /* Activate Netlink support in VF mode. */
 148 #define MLX5_VF_NL_EN "vf_nl_en"
 149
 150 /* Enable extending memsegs when creating a MR. */
 151 #define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en"
 152
 153 /* Select port representors to instantiate. */
 154 #define MLX5_REPRESENTOR "representor"
 155
 156 /* Device parameter to configure the maximum number of dump files per queue. */
 157 #define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
 158
 159 /* Configure timeout of LRO session (in microseconds). */
 160 #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
 161
 162 /*
 163  * Device parameter to configure the total data buffer size for a single
 164  * hairpin queue (logarithm value).
 165  */
 166 #define MLX5_HP_BUF_SIZE "hp_buf_log_sz"
 167
 168 /* Flow memory reclaim mode. */
 169 #define MLX5_RECLAIM_MEM "reclaim_mem_mode"
 170
 171 /* The default memory allocator used in PMD. */
 172 #define MLX5_SYS_MEM_EN "sys_mem_en"
 173 /* Decap will be used or not. */
 174 #define MLX5_DECAP_EN "decap_en"
 175
 176 /* Shared memory between primary and secondary processes. */
 177 struct mlx5_shared_data *mlx5_shared_data;
 178
 179 /** Driver-specific log messages type. */
 180 int mlx5_logtype;
 181
 182 static LIST_HEAD(, mlx5_dev_ctx_shared) mlx5_dev_ctx_list =
 183                                                 LIST_HEAD_INITIALIZER();
 184 static pthread_mutex_t mlx5_dev_ctx_list_mutex;
 185 static const struct mlx5_indexed_pool_config mlx5_ipool_cfg[] = {
 186 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
 187         [MLX5_IPOOL_DECAP_ENCAP] = {
 188                 .size = sizeof(struct mlx5_flow_dv_encap_decap_resource),
 189                 .trunk_size = 64,
 190                 .grow_trunk = 3,
 191                 .grow_shift = 2,
 192                 .need_lock = 1,
 193                 .release_mem_en = 1,
 194                 .malloc = mlx5_malloc,
 195                 .free = mlx5_free,
 196                 .type = "mlx5_encap_decap_ipool",
 197         },
 198         [MLX5_IPOOL_PUSH_VLAN] = {
 199                 .size = sizeof(struct mlx5_flow_dv_push_vlan_action_resource),
 200                 .trunk_size = 64,
 201                 .grow_trunk = 3,
 202                 .grow_shift = 2,
 203                 .need_lock = 1,
 204                 .release_mem_en = 1,
 205                 .malloc = mlx5_malloc,
 206                 .free = mlx5_free,
 207                 .type = "mlx5_push_vlan_ipool",
 208         },
 209         [MLX5_IPOOL_TAG] = {
 210                 .size = sizeof(struct mlx5_flow_dv_tag_resource),
 211                 .trunk_size = 64,
 212                 .grow_trunk = 3,
 213                 .grow_shift = 2,
 214                 .need_lock = 1,
 215                 .release_mem_en = 1,
 216                 .malloc = mlx5_malloc,
 217                 .free = mlx5_free,
 218                 .type = "mlx5_tag_ipool",
 219         },
 220         [MLX5_IPOOL_PORT_ID] = {
 221                 .size = sizeof(struct mlx5_flow_dv_port_id_action_resource),
 222                 .trunk_size = 64,
 223                 .grow_trunk = 3,
 224                 .grow_shift = 2,
 225                 .need_lock = 1,
 226                 .release_mem_en = 1,
 227                 .malloc = mlx5_malloc,
 228                 .free = mlx5_free,
 229                 .type = "mlx5_port_id_ipool",
 230         },
 231         [MLX5_IPOOL_JUMP] = {
 232                 .size = sizeof(struct mlx5_flow_tbl_data_entry),
 233                 .trunk_size = 64,
 234                 .grow_trunk = 3,
 235                 .grow_shift = 2,
 236                 .need_lock = 1,
 237                 .release_mem_en = 1,
 238                 .malloc = mlx5_malloc,
 239                 .free = mlx5_free,
 240                 .type = "mlx5_jump_ipool",
 241         },
 242         [MLX5_IPOOL_SAMPLE] = {
 243                 .size = sizeof(struct mlx5_flow_dv_sample_resource),
 244                 .trunk_size = 64,
 245                 .grow_trunk = 3,
 246                 .grow_shift = 2,
 247                 .need_lock = 1,
 248                 .release_mem_en = 1,
 249                 .malloc = mlx5_malloc,
 250                 .free = mlx5_free,
 251                 .type = "mlx5_sample_ipool",
 252         },
 253         [MLX5_IPOOL_DEST_ARRAY] = {
 254                 .size = sizeof(struct mlx5_flow_dv_dest_array_resource),
 255                 .trunk_size = 64,
 256                 .grow_trunk = 3,
 257                 .grow_shift = 2,
 258                 .need_lock = 1,
 259                 .release_mem_en = 1,
 260                 .malloc = mlx5_malloc,
 261                 .free = mlx5_free,
 262                 .type = "mlx5_dest_array_ipool",
 263         },
 264         [MLX5_IPOOL_TUNNEL_ID] = {
 265                 .size = sizeof(struct mlx5_flow_tunnel),
 266                 .trunk_size = MLX5_MAX_TUNNELS,
 267                 .need_lock = 1,
 268                 .release_mem_en = 1,
 269                 .type = "mlx5_tunnel_offload",
 270         },
 271         [MLX5_IPOOL_TNL_TBL_ID] = {
 272                 .size = 0,
 273                 .need_lock = 1,
 274                 .type = "mlx5_flow_tnl_tbl_ipool",
 275         },
 276 #endif
 277         [MLX5_IPOOL_MTR] = {
 278                 .size = sizeof(struct mlx5_flow_meter),
 279                 .trunk_size = 64,
 280                 .grow_trunk = 3,
 281                 .grow_shift = 2,
 282                 .need_lock = 1,
 283                 .release_mem_en = 1,
 284                 .malloc = mlx5_malloc,
 285                 .free = mlx5_free,
 286                 .type = "mlx5_meter_ipool",
 287         },
 288         [MLX5_IPOOL_MCP] = {
 289                 .size = sizeof(struct mlx5_flow_mreg_copy_resource),
 290                 .trunk_size = 64,
 291                 .grow_trunk = 3,
 292                 .grow_shift = 2,
 293                 .need_lock = 1,
 294                 .release_mem_en = 1,
 295                 .malloc = mlx5_malloc,
 296                 .free = mlx5_free,
 297                 .type = "mlx5_mcp_ipool",
 298         },
 299         [MLX5_IPOOL_HRXQ] = {
 300                 .size = (sizeof(struct mlx5_hrxq) + MLX5_RSS_HASH_KEY_LEN),
 301                 .trunk_size = 64,
 302                 .grow_trunk = 3,
 303                 .grow_shift = 2,
 304                 .need_lock = 1,
 305                 .release_mem_en = 1,
 306                 .malloc = mlx5_malloc,
 307                 .free = mlx5_free,
 308                 .type = "mlx5_hrxq_ipool",
 309         },
 310         [MLX5_IPOOL_MLX5_FLOW] = {
 311                 /*
 312                  * MLX5_IPOOL_MLX5_FLOW size varies for DV and VERBS flows.
 313                  * It set in run time according to PCI function configuration.
 314                  */
 315                 .size = 0,
 316                 .trunk_size = 64,
 317                 .grow_trunk = 3,
 318                 .grow_shift = 2,
 319                 .need_lock = 1,
 320                 .release_mem_en = 1,
 321                 .malloc = mlx5_malloc,
 322                 .free = mlx5_free,
 323                 .type = "mlx5_flow_handle_ipool",
 324         },
 325         [MLX5_IPOOL_RTE_FLOW] = {
 326                 .size = sizeof(struct rte_flow),
 327                 .trunk_size = 4096,
 328                 .need_lock = 1,
 329                 .release_mem_en = 1,
 330                 .malloc = mlx5_malloc,
 331                 .free = mlx5_free,
 332                 .type = "rte_flow_ipool",
 333         },
 334         [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID] = {
 335                 .size = 0,
 336                 .need_lock = 1,
 337                 .type = "mlx5_flow_rss_id_ipool",
 338         },
 339         [MLX5_IPOOL_RSS_SHARED_ACTIONS] = {
 340                 .size = sizeof(struct mlx5_shared_action_rss),
 341                 .trunk_size = 64,
 342                 .grow_trunk = 3,
 343                 .grow_shift = 2,
 344                 .need_lock = 1,
 345                 .release_mem_en = 1,
 346                 .malloc = mlx5_malloc,
 347                 .free = mlx5_free,
 348                 .type = "mlx5_shared_action_rss",
 349         },
 350 };
 351
 352
 353 #define MLX5_FLOW_MIN_ID_POOL_SIZE 512
 354 #define MLX5_ID_GENERATION_ARRAY_FACTOR 16
 355
 356 #define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 4096
 357
 358 /**
 359  * Decide whether representor ID is a HPF(host PF) port on BF2.
 360  *
 361  * @param dev
 362  *   Pointer to Ethernet device structure.
 363  *
 364  * @return
 365  *   Non-zero if HPF, otherwise 0.
 366  */
 367 bool
 368 mlx5_is_hpf(struct rte_eth_dev *dev)
 369 {
 370         struct mlx5_priv *priv = dev->data->dev_private;
 371         uint16_t repr = MLX5_REPRESENTOR_REPR(priv->representor_id);
 372         int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
 373
 374         return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_VF &&
 375                MLX5_REPRESENTOR_REPR(-1) == repr;
 376 }
 377
 378 /**
 379  * Initialize the ASO aging management structure.
 380  *
 381  * @param[in] sh
 382  *   Pointer to mlx5_dev_ctx_shared object to free
 383  *
 384  * @return
 385  *   0 on success, a negative errno value otherwise and rte_errno is set.
 386  */
 387 int
 388 mlx5_flow_aso_age_mng_init(struct mlx5_dev_ctx_shared *sh)
 389 {
 390         int err;
 391
 392         if (sh->aso_age_mng)
 393                 return 0;
 394         sh->aso_age_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->aso_age_mng),
 395                                       RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 396         if (!sh->aso_age_mng) {
 397                 DRV_LOG(ERR, "aso_age_mng allocation was failed.");
 398                 rte_errno = ENOMEM;
 399                 return -ENOMEM;
 400         }
 401         err = mlx5_aso_queue_init(sh);
 402         if (err) {
 403                 mlx5_free(sh->aso_age_mng);
 404                 return -1;
 405         }
 406         rte_spinlock_init(&sh->aso_age_mng->resize_sl);
 407         rte_spinlock_init(&sh->aso_age_mng->free_sl);
 408         LIST_INIT(&sh->aso_age_mng->free);
 409         return 0;
 410 }
 411
 412 /**
 413  * Close and release all the resources of the ASO aging management structure.
 414  *
 415  * @param[in] sh
 416  *   Pointer to mlx5_dev_ctx_shared object to free.
 417  */
 418 static void
 419 mlx5_flow_aso_age_mng_close(struct mlx5_dev_ctx_shared *sh)
 420 {
 421         int i, j;
 422
 423         mlx5_aso_queue_stop(sh);
 424         mlx5_aso_queue_uninit(sh);
 425         if (sh->aso_age_mng->pools) {
 426                 struct mlx5_aso_age_pool *pool;
 427
 428                 for (i = 0; i < sh->aso_age_mng->next; ++i) {
 429                         pool = sh->aso_age_mng->pools[i];
 430                         claim_zero(mlx5_devx_cmd_destroy
 431                                                 (pool->flow_hit_aso_obj));
 432                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j)
 433                                 if (pool->actions[j].dr_action)
 434                                         claim_zero
 435                                             (mlx5_flow_os_destroy_flow_action
 436                                               (pool->actions[j].dr_action));
 437                         mlx5_free(pool);
 438                 }
 439                 mlx5_free(sh->aso_age_mng->pools);
 440         }
 441         mlx5_free(sh->aso_age_mng);
 442 }
 443
 444 /**
 445  * Initialize the shared aging list information per port.
 446  *
 447  * @param[in] sh
 448  *   Pointer to mlx5_dev_ctx_shared object.
 449  */
 450 static void
 451 mlx5_flow_aging_init(struct mlx5_dev_ctx_shared *sh)
 452 {
 453         uint32_t i;
 454         struct mlx5_age_info *age_info;
 455
 456         for (i = 0; i < sh->max_port; i++) {
 457                 age_info = &sh->port[i].age_info;
 458                 age_info->flags = 0;
 459                 TAILQ_INIT(&age_info->aged_counters);
 460                 LIST_INIT(&age_info->aged_aso);
 461                 rte_spinlock_init(&age_info->aged_sl);
 462                 MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
 463         }
 464 }
 465
 466 /**
 467  * Initialize the counters management structure.
 468  *
 469  * @param[in] sh
 470  *   Pointer to mlx5_dev_ctx_shared object to free
 471  */
 472 static void
 473 mlx5_flow_counters_mng_init(struct mlx5_dev_ctx_shared *sh)
 474 {
 475         int i;
 476
 477         memset(&sh->cmng, 0, sizeof(sh->cmng));
 478         TAILQ_INIT(&sh->cmng.flow_counters);
 479         sh->cmng.min_id = MLX5_CNT_BATCH_OFFSET;
 480         sh->cmng.max_id = -1;
 481         sh->cmng.last_pool_idx = POOL_IDX_INVALID;
 482         rte_spinlock_init(&sh->cmng.pool_update_sl);
 483         for (i = 0; i < MLX5_COUNTER_TYPE_MAX; i++) {
 484                 TAILQ_INIT(&sh->cmng.counters[i]);
 485                 rte_spinlock_init(&sh->cmng.csl[i]);
 486         }
 487 }
 488
 489 /**
 490  * Destroy all the resources allocated for a counter memory management.
 491  *
 492  * @param[in] mng
 493  *   Pointer to the memory management structure.
 494  */
 495 static void
 496 mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
 497 {
 498         uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
 499
 500         LIST_REMOVE(mng, next);
 501         claim_zero(mlx5_devx_cmd_destroy(mng->dm));
 502         claim_zero(mlx5_os_umem_dereg(mng->umem));
 503         mlx5_free(mem);
 504 }
 505
 506 /**
 507  * Close and release all the resources of the counters management.
 508  *
 509  * @param[in] sh
 510  *   Pointer to mlx5_dev_ctx_shared object to free.
 511  */
 512 static void
 513 mlx5_flow_counters_mng_close(struct mlx5_dev_ctx_shared *sh)
 514 {
 515         struct mlx5_counter_stats_mem_mng *mng;
 516         int i, j;
 517         int retries = 1024;
 518
 519         rte_errno = 0;
 520         while (--retries) {
 521                 rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
 522                 if (rte_errno != EINPROGRESS)
 523                         break;
 524                 rte_pause();
 525         }
 526
 527         if (sh->cmng.pools) {
 528                 struct mlx5_flow_counter_pool *pool;
 529                 uint16_t n_valid = sh->cmng.n_valid;
 530                 bool fallback = sh->cmng.counter_fallback;
 531
 532                 for (i = 0; i < n_valid; ++i) {
 533                         pool = sh->cmng.pools[i];
 534                         if (!fallback && pool->min_dcs)
 535                                 claim_zero(mlx5_devx_cmd_destroy
 536                                                                (pool->min_dcs));
 537                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
 538                                 struct mlx5_flow_counter *cnt =
 539                                                 MLX5_POOL_GET_CNT(pool, j);
 540
 541                                 if (cnt->action)
 542                                         claim_zero
 543                                          (mlx5_flow_os_destroy_flow_action
 544                                           (cnt->action));
 545                                 if (fallback && MLX5_POOL_GET_CNT
 546                                     (pool, j)->dcs_when_free)
 547                                         claim_zero(mlx5_devx_cmd_destroy
 548                                                    (cnt->dcs_when_free));
 549                         }
 550                         mlx5_free(pool);
 551                 }
 552                 mlx5_free(sh->cmng.pools);
 553         }
 554         mng = LIST_FIRST(&sh->cmng.mem_mngs);
 555         while (mng) {
 556                 mlx5_flow_destroy_counter_stat_mem_mng(mng);
 557                 mng = LIST_FIRST(&sh->cmng.mem_mngs);
 558         }
 559         memset(&sh->cmng, 0, sizeof(sh->cmng));
 560 }
 561
 562 /* Send FLOW_AGED event if needed. */
 563 void
 564 mlx5_age_event_prepare(struct mlx5_dev_ctx_shared *sh)
 565 {
 566         struct mlx5_age_info *age_info;
 567         uint32_t i;
 568
 569         for (i = 0; i < sh->max_port; i++) {
 570                 age_info = &sh->port[i].age_info;
 571                 if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
 572                         continue;
 573                 if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER))
 574                         rte_eth_dev_callback_process
 575                                 (&rte_eth_devices[sh->port[i].devx_ih_port_id],
 576                                 RTE_ETH_EVENT_FLOW_AGED, NULL);
 577                 age_info->flags = 0;
 578         }
 579 }
 580
 581 /**
 582  * Initialize the flow resources' indexed mempool.
 583  *
 584  * @param[in] sh
 585  *   Pointer to mlx5_dev_ctx_shared object.
 586  * @param[in] sh
 587  *   Pointer to user dev config.
 588  */
 589 static void
 590 mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh,
 591                        const struct mlx5_dev_config *config)
 592 {
 593         uint8_t i;
 594         struct mlx5_indexed_pool_config cfg;
 595
 596         for (i = 0; i < MLX5_IPOOL_MAX; ++i) {
 597                 cfg = mlx5_ipool_cfg[i];
 598                 switch (i) {
 599                 default:
 600                         break;
 601                 /*
 602                  * Set MLX5_IPOOL_MLX5_FLOW ipool size
 603                  * according to PCI function flow configuration.
 604                  */
 605                 case MLX5_IPOOL_MLX5_FLOW:
 606                         cfg.size = config->dv_flow_en ?
 607                                 sizeof(struct mlx5_flow_handle) :
 608                                 MLX5_FLOW_HANDLE_VERBS_SIZE;
 609                         break;
 610                 }
 611                 if (config->reclaim_mode)
 612                         cfg.release_mem_en = 1;
 613                 sh->ipool[i] = mlx5_ipool_create(&cfg);
 614         }
 615 }
 616
 617 /**
 618  * Release the flow resources' indexed mempool.
 619  *
 620  * @param[in] sh
 621  *   Pointer to mlx5_dev_ctx_shared object.
 622  */
 623 static void
 624 mlx5_flow_ipool_destroy(struct mlx5_dev_ctx_shared *sh)
 625 {
 626         uint8_t i;
 627
 628         for (i = 0; i < MLX5_IPOOL_MAX; ++i)
 629                 mlx5_ipool_destroy(sh->ipool[i]);
 630 }
 631
 632 /*
 633  * Check if dynamic flex parser for eCPRI already exists.
 634  *
 635  * @param dev
 636  *   Pointer to Ethernet device structure.
 637  *
 638  * @return
 639  *   true on exists, false on not.
 640  */
 641 bool
 642 mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
 643 {
 644         struct mlx5_priv *priv = dev->data->dev_private;
 645         struct mlx5_flex_parser_profiles *prf =
 646                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
 647
 648         return !!prf->obj;
 649 }
 650
 651 /*
 652  * Allocation of a flex parser for eCPRI. Once created, this parser related
 653  * resources will be held until the device is closed.
 654  *
 655  * @param dev
 656  *   Pointer to Ethernet device structure.
 657  *
 658  * @return
 659  *   0 on success, a negative errno value otherwise and rte_errno is set.
 660  */
 661 int
 662 mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
 663 {
 664         struct mlx5_priv *priv = dev->data->dev_private;
 665         struct mlx5_flex_parser_profiles *prf =
 666                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
 667         struct mlx5_devx_graph_node_attr node = {
 668                 .modify_field_select = 0,
 669         };
 670         uint32_t ids[8];
 671         int ret;
 672
 673         if (!priv->config.hca_attr.parse_graph_flex_node) {
 674                 DRV_LOG(ERR, "Dynamic flex parser is not supported "
 675                         "for device %s.", priv->dev_data->name);
 676                 return -ENOTSUP;
 677         }
 678         node.header_length_mode = MLX5_GRAPH_NODE_LEN_FIXED;
 679         /* 8 bytes now: 4B common header + 4B message body header. */
 680         node.header_length_base_value = 0x8;
 681         /* After MAC layer: Ether / VLAN. */
 682         node.in[0].arc_parse_graph_node = MLX5_GRAPH_ARC_NODE_MAC;
 683         /* Type of compared condition should be 0xAEFE in the L2 layer. */
 684         node.in[0].compare_condition_value = RTE_ETHER_TYPE_ECPRI;
 685         /* Sample #0: type in common header. */
 686         node.sample[0].flow_match_sample_en = 1;
 687         /* Fixed offset. */
 688         node.sample[0].flow_match_sample_offset_mode = 0x0;
 689         /* Only the 2nd byte will be used. */
 690         node.sample[0].flow_match_sample_field_base_offset = 0x0;
 691         /* Sample #1: message payload. */
 692         node.sample[1].flow_match_sample_en = 1;
 693         /* Fixed offset. */
 694         node.sample[1].flow_match_sample_offset_mode = 0x0;
 695         /*
 696          * Only the first two bytes will be used right now, and its offset will
 697          * start after the common header that with the length of a DW(u32).
 698          */
 699         node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
 700         prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->ctx, &node);
 701         if (!prf->obj) {
 702                 DRV_LOG(ERR, "Failed to create flex parser node object.");
 703                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
 704         }
 705         prf->num = 2;
 706         ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
 707         if (ret) {
 708                 DRV_LOG(ERR, "Failed to query sample IDs.");
 709                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
 710         }
 711         prf->offset[0] = 0x0;
 712         prf->offset[1] = sizeof(uint32_t);
 713         prf->ids[0] = ids[0];
 714         prf->ids[1] = ids[1];
 715         return 0;
 716 }
 717
 718 /*
 719  * Destroy the flex parser node, including the parser itself, input / output
 720  * arcs and DW samples. Resources could be reused then.
 721  *
 722  * @param dev
 723  *   Pointer to Ethernet device structure.
 724  */
 725 static void
 726 mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
 727 {
 728         struct mlx5_priv *priv = dev->data->dev_private;
 729         struct mlx5_flex_parser_profiles *prf =
 730                                 &priv->sh->fp[MLX5_FLEX_PARSER_ECPRI_0];
 731
 732         if (prf->obj)
 733                 mlx5_devx_cmd_destroy(prf->obj);
 734         prf->obj = NULL;
 735 }
 736
 737 /*
 738  * Allocate Rx and Tx UARs in robust fashion.
 739  * This routine handles the following UAR allocation issues:
 740  *
 741  *  - tries to allocate the UAR with the most appropriate memory
 742  *    mapping type from the ones supported by the host
 743  *
 744  *  - tries to allocate the UAR with non-NULL base address
 745  *    OFED 5.0.x and Upstream rdma_core before v29 returned the NULL as
 746  *    UAR base address if UAR was not the first object in the UAR page.
 747  *    It caused the PMD failure and we should try to get another UAR
 748  *    till we get the first one with non-NULL base address returned.
 749  */
 750 static int
 751 mlx5_alloc_rxtx_uars(struct mlx5_dev_ctx_shared *sh,
 752                      const struct mlx5_dev_config *config)
 753 {
 754         uint32_t uar_mapping, retry;
 755         int err = 0;
 756         void *base_addr;
 757
 758         for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
 759 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
 760                 /* Control the mapping type according to the settings. */
 761                 uar_mapping = (config->dbnc == MLX5_TXDB_NCACHED) ?
 762                               MLX5DV_UAR_ALLOC_TYPE_NC :
 763                               MLX5DV_UAR_ALLOC_TYPE_BF;
 764 #else
 765                 RTE_SET_USED(config);
 766                 /*
 767                  * It seems we have no way to control the memory mapping type
 768                  * for the UAR, the default "Write-Combining" type is supposed.
 769                  * The UAR initialization on queue creation queries the
 770                  * actual mapping type done by Verbs/kernel and setups the
 771                  * PMD datapath accordingly.
 772                  */
 773                 uar_mapping = 0;
 774 #endif
 775                 sh->tx_uar = mlx5_glue->devx_alloc_uar(sh->ctx, uar_mapping);
 776 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
 777                 if (!sh->tx_uar &&
 778                     uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
 779                         if (config->dbnc == MLX5_TXDB_CACHED ||
 780                             config->dbnc == MLX5_TXDB_HEURISTIC)
 781                                 DRV_LOG(WARNING, "Devarg tx_db_nc setting "
 782                                                  "is not supported by DevX");
 783                         /*
 784                          * In some environments like virtual machine
 785                          * the Write Combining mapped might be not supported
 786                          * and UAR allocation fails. We try "Non-Cached"
 787                          * mapping for the case. The tx_burst routines take
 788                          * the UAR mapping type into account on UAR setup
 789                          * on queue creation.
 790                          */
 791                         DRV_LOG(DEBUG, "Failed to allocate Tx DevX UAR (BF)");
 792                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
 793                         sh->tx_uar = mlx5_glue->devx_alloc_uar
 794                                                         (sh->ctx, uar_mapping);
 795                 } else if (!sh->tx_uar &&
 796                            uar_mapping == MLX5DV_UAR_ALLOC_TYPE_NC) {
 797                         if (config->dbnc == MLX5_TXDB_NCACHED)
 798                                 DRV_LOG(WARNING, "Devarg tx_db_nc settings "
 799                                                  "is not supported by DevX");
 800                         /*
 801                          * If Verbs/kernel does not support "Non-Cached"
 802                          * try the "Write-Combining".
 803                          */
 804                         DRV_LOG(DEBUG, "Failed to allocate Tx DevX UAR (NC)");
 805                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_BF;
 806                         sh->tx_uar = mlx5_glue->devx_alloc_uar
 807                                                         (sh->ctx, uar_mapping);
 808                 }
 809 #endif
 810                 if (!sh->tx_uar) {
 811                         DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (BF/NC)");
 812                         err = ENOMEM;
 813                         goto exit;
 814                 }
 815                 base_addr = mlx5_os_get_devx_uar_base_addr(sh->tx_uar);
 816                 if (base_addr)
 817                         break;
 818                 /*
 819                  * The UARs are allocated by rdma_core within the
 820                  * IB device context, on context closure all UARs
 821                  * will be freed, should be no memory/object leakage.
 822                  */
 823                 DRV_LOG(DEBUG, "Retrying to allocate Tx DevX UAR");
 824                 sh->tx_uar = NULL;
 825         }
 826         /* Check whether we finally succeeded with valid UAR allocation. */
 827         if (!sh->tx_uar) {
 828                 DRV_LOG(ERR, "Failed to allocate Tx DevX UAR (NULL base)");
 829                 err = ENOMEM;
 830                 goto exit;
 831         }
 832         for (retry = 0; retry < MLX5_ALLOC_UAR_RETRY; ++retry) {
 833                 uar_mapping = 0;
 834                 sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
 835                                                         (sh->ctx, uar_mapping);
 836 #ifdef MLX5DV_UAR_ALLOC_TYPE_NC
 837                 if (!sh->devx_rx_uar &&
 838                     uar_mapping == MLX5DV_UAR_ALLOC_TYPE_BF) {
 839                         /*
 840                          * Rx UAR is used to control interrupts only,
 841                          * should be no datapath noticeable impact,
 842                          * can try "Non-Cached" mapping safely.
 843                          */
 844                         DRV_LOG(DEBUG, "Failed to allocate Rx DevX UAR (BF)");
 845                         uar_mapping = MLX5DV_UAR_ALLOC_TYPE_NC;
 846                         sh->devx_rx_uar = mlx5_glue->devx_alloc_uar
 847                                                         (sh->ctx, uar_mapping);
 848                 }
 849 #endif
 850                 if (!sh->devx_rx_uar) {
 851                         DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (BF/NC)");
 852                         err = ENOMEM;
 853                         goto exit;
 854                 }
 855                 base_addr = mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar);
 856                 if (base_addr)
 857                         break;
 858                 /*
 859                  * The UARs are allocated by rdma_core within the
 860                  * IB device context, on context closure all UARs
 861                  * will be freed, should be no memory/object leakage.
 862                  */
 863                 DRV_LOG(DEBUG, "Retrying to allocate Rx DevX UAR");
 864                 sh->devx_rx_uar = NULL;
 865         }
 866         /* Check whether we finally succeeded with valid UAR allocation. */
 867         if (!sh->devx_rx_uar) {
 868                 DRV_LOG(ERR, "Failed to allocate Rx DevX UAR (NULL base)");
 869                 err = ENOMEM;
 870         }
 871 exit:
 872         return err;
 873 }
 874
 875 /**
 876  * Allocate shared device context. If there is multiport device the
 877  * master and representors will share this context, if there is single
 878  * port dedicated device, the context will be used by only given
 879  * port due to unification.
 880  *
 881  * Routine first searches the context for the specified device name,
 882  * if found the shared context assumed and reference counter is incremented.
 883  * If no context found the new one is created and initialized with specified
 884  * device context and parameters.
 885  *
 886  * @param[in] spawn
 887  *   Pointer to the device attributes (name, port, etc).
 888  * @param[in] config
 889  *   Pointer to device configuration structure.
 890  *
 891  * @return
 892  *   Pointer to mlx5_dev_ctx_shared object on success,
 893  *   otherwise NULL and rte_errno is set.
 894  */
 895 struct mlx5_dev_ctx_shared *
 896 mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
 897                            const struct mlx5_dev_config *config)
 898 {
 899         struct mlx5_dev_ctx_shared *sh;
 900         int err = 0;
 901         uint32_t i;
 902         struct mlx5_devx_tis_attr tis_attr = { 0 };
 903
 904         MLX5_ASSERT(spawn);
 905         /* Secondary process should not create the shared context. */
 906         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
 907         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
 908         /* Search for IB context by device name. */
 909         LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
 910                 if (!strcmp(sh->ibdev_name,
 911                         mlx5_os_get_dev_device_name(spawn->phys_dev))) {
 912                         sh->refcnt++;
 913                         goto exit;
 914                 }
 915         }
 916         /* No device found, we have to create new shared context. */
 917         MLX5_ASSERT(spawn->max_port);
 918         sh = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
 919                          sizeof(struct mlx5_dev_ctx_shared) +
 920                          spawn->max_port *
 921                          sizeof(struct mlx5_dev_shared_port),
 922                          RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 923         if (!sh) {
 924                 DRV_LOG(ERR, "shared context allocation failure");
 925                 rte_errno  = ENOMEM;
 926                 goto exit;
 927         }
 928         if (spawn->bond_info)
 929                 sh->bond = *spawn->bond_info;
 930         err = mlx5_os_open_device(spawn, config, sh);
 931         if (!sh->ctx)
 932                 goto error;
 933         err = mlx5_os_get_dev_attr(sh->ctx, &sh->device_attr);
 934         if (err) {
 935                 DRV_LOG(DEBUG, "mlx5_os_get_dev_attr() failed");
 936                 goto error;
 937         }
 938         sh->refcnt = 1;
 939         sh->max_port = spawn->max_port;
 940         strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->ctx),
 941                 sizeof(sh->ibdev_name) - 1);
 942         strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->ctx),
 943                 sizeof(sh->ibdev_path) - 1);
 944         /*
 945          * Setting port_id to max unallowed value means
 946          * there is no interrupt subhandler installed for
 947          * the given port index i.
 948          */
 949         for (i = 0; i < sh->max_port; i++) {
 950                 sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
 951                 sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
 952         }
 953         sh->pd = mlx5_os_alloc_pd(sh->ctx);
 954         if (sh->pd == NULL) {
 955                 DRV_LOG(ERR, "PD allocation failure");
 956                 err = ENOMEM;
 957                 goto error;
 958         }
 959         if (sh->devx) {
 960                 err = mlx5_os_get_pdn(sh->pd, &sh->pdn);
 961                 if (err) {
 962                         DRV_LOG(ERR, "Fail to extract pdn from PD");
 963                         goto error;
 964                 }
 965                 sh->td = mlx5_devx_cmd_create_td(sh->ctx);
 966                 if (!sh->td) {
 967                         DRV_LOG(ERR, "TD allocation failure");
 968                         err = ENOMEM;
 969                         goto error;
 970                 }
 971                 tis_attr.transport_domain = sh->td->id;
 972                 sh->tis = mlx5_devx_cmd_create_tis(sh->ctx, &tis_attr);
 973                 if (!sh->tis) {
 974                         DRV_LOG(ERR, "TIS allocation failure");
 975                         err = ENOMEM;
 976                         goto error;
 977                 }
 978                 err = mlx5_alloc_rxtx_uars(sh, config);
 979                 if (err)
 980                         goto error;
 981                 MLX5_ASSERT(sh->tx_uar);
 982                 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar));
 983
 984                 MLX5_ASSERT(sh->devx_rx_uar);
 985                 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar));
 986         }
 987 #ifndef RTE_ARCH_64
 988         /* Initialize UAR access locks for 32bit implementations. */
 989         rte_spinlock_init(&sh->uar_lock_cq);
 990         for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
 991                 rte_spinlock_init(&sh->uar_lock[i]);
 992 #endif
 993         /*
 994          * Once the device is added to the list of memory event
 995          * callback, its global MR cache table cannot be expanded
 996          * on the fly because of deadlock. If it overflows, lookup
 997          * should be done by searching MR list linearly, which is slow.
 998          *
 999          * At this point the device is not added to the memory
1000          * event list yet, context is just being created.
1001          */
1002         err = mlx5_mr_btree_init(&sh->share_cache.cache,
1003                                  MLX5_MR_BTREE_CACHE_N * 2,
1004                                  spawn->pci_dev->device.numa_node);
1005         if (err) {
1006                 err = rte_errno;
1007                 goto error;
1008         }
1009         mlx5_os_set_reg_mr_cb(&sh->share_cache.reg_mr_cb,
1010                               &sh->share_cache.dereg_mr_cb);
1011         mlx5_os_dev_shared_handler_install(sh);
1012         sh->cnt_id_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_DWORD);
1013         if (!sh->cnt_id_tbl) {
1014                 err = rte_errno;
1015                 goto error;
1016         }
1017         if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
1018                 err = mlx5_flow_os_init_workspace_once();
1019                 if (err)
1020                         goto error;
1021         }
1022         mlx5_flow_aging_init(sh);
1023         mlx5_flow_counters_mng_init(sh);
1024         mlx5_flow_ipool_create(sh, config);
1025         /* Add device to memory callback list. */
1026         rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1027         LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
1028                          sh, mem_event_cb);
1029         rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1030         /* Add context to the global device list. */
1031         LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
1032         rte_spinlock_init(&sh->geneve_tlv_opt_sl);
1033 exit:
1034         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1035         return sh;
1036 error:
1037         pthread_mutex_destroy(&sh->txpp.mutex);
1038         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1039         MLX5_ASSERT(sh);
1040         if (sh->cnt_id_tbl)
1041                 mlx5_l3t_destroy(sh->cnt_id_tbl);
1042         if (sh->tis)
1043                 claim_zero(mlx5_devx_cmd_destroy(sh->tis));
1044         if (sh->td)
1045                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1046         if (sh->devx_rx_uar)
1047                 mlx5_glue->devx_free_uar(sh->devx_rx_uar);
1048         if (sh->tx_uar)
1049                 mlx5_glue->devx_free_uar(sh->tx_uar);
1050         if (sh->pd)
1051                 claim_zero(mlx5_os_dealloc_pd(sh->pd));
1052         if (sh->ctx)
1053                 claim_zero(mlx5_glue->close_device(sh->ctx));
1054         mlx5_free(sh);
1055         MLX5_ASSERT(err > 0);
1056         rte_errno = err;
1057         return NULL;
1058 }
1059
1060 /**
1061  * Free shared IB device context. Decrement counter and if zero free
1062  * all allocated resources and close handles.
1063  *
1064  * @param[in] sh
1065  *   Pointer to mlx5_dev_ctx_shared object to free
1066  */
1067 void
1068 mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
1069 {
1070         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1071 #ifdef RTE_LIBRTE_MLX5_DEBUG
1072         /* Check the object presence in the list. */
1073         struct mlx5_dev_ctx_shared *lctx;
1074
1075         LIST_FOREACH(lctx, &mlx5_dev_ctx_list, next)
1076                 if (lctx == sh)
1077                         break;
1078         MLX5_ASSERT(lctx);
1079         if (lctx != sh) {
1080                 DRV_LOG(ERR, "Freeing non-existing shared IB context");
1081                 goto exit;
1082         }
1083 #endif
1084         MLX5_ASSERT(sh);
1085         MLX5_ASSERT(sh->refcnt);
1086         /* Secondary process should not free the shared context. */
1087         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1088         if (--sh->refcnt)
1089                 goto exit;
1090         /* Remove from memory callback device list. */
1091         rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1092         LIST_REMOVE(sh, mem_event_cb);
1093         rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1094         /* Release created Memory Regions. */
1095         mlx5_mr_release_cache(&sh->share_cache);
1096         /* Remove context from the global device list. */
1097         LIST_REMOVE(sh, next);
1098         /* Release flow workspaces objects on the last device. */
1099         if (LIST_EMPTY(&mlx5_dev_ctx_list))
1100                 mlx5_flow_os_release_workspace();
1101         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1102         /*
1103          *  Ensure there is no async event handler installed.
1104          *  Only primary process handles async device events.
1105          **/
1106         mlx5_flow_counters_mng_close(sh);
1107         if (sh->aso_age_mng) {
1108                 mlx5_flow_aso_age_mng_close(sh);
1109                 sh->aso_age_mng = NULL;
1110         }
1111         mlx5_flow_ipool_destroy(sh);
1112         mlx5_os_dev_shared_handler_uninstall(sh);
1113         if (sh->cnt_id_tbl) {
1114                 mlx5_l3t_destroy(sh->cnt_id_tbl);
1115                 sh->cnt_id_tbl = NULL;
1116         }
1117         if (sh->tx_uar) {
1118                 mlx5_glue->devx_free_uar(sh->tx_uar);
1119                 sh->tx_uar = NULL;
1120         }
1121         if (sh->pd)
1122                 claim_zero(mlx5_os_dealloc_pd(sh->pd));
1123         if (sh->tis)
1124                 claim_zero(mlx5_devx_cmd_destroy(sh->tis));
1125         if (sh->td)
1126                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1127         if (sh->devx_rx_uar)
1128                 mlx5_glue->devx_free_uar(sh->devx_rx_uar);
1129         if (sh->ctx)
1130                 claim_zero(mlx5_glue->close_device(sh->ctx));
1131         MLX5_ASSERT(sh->geneve_tlv_option_resource == NULL);
1132         pthread_mutex_destroy(&sh->txpp.mutex);
1133         mlx5_free(sh);
1134         return;
1135 exit:
1136         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1137 }
1138
1139 /**
1140  * Destroy table hash list.
1141  *
1142  * @param[in] priv
1143  *   Pointer to the private device data structure.
1144  */
1145 void
1146 mlx5_free_table_hash_list(struct mlx5_priv *priv)
1147 {
1148         struct mlx5_dev_ctx_shared *sh = priv->sh;
1149
1150         if (!sh->flow_tbls)
1151                 return;
1152         mlx5_hlist_destroy(sh->flow_tbls);
1153 }
1154
1155 /**
1156  * Initialize flow table hash list and create the root tables entry
1157  * for each domain.
1158  *
1159  * @param[in] priv
1160  *   Pointer to the private device data structure.
1161  *
1162  * @return
1163  *   Zero on success, positive error code otherwise.
1164  */
1165 int
1166 mlx5_alloc_table_hash_list(struct mlx5_priv *priv __rte_unused)
1167 {
1168         int err = 0;
1169         /* Tables are only used in DV and DR modes. */
1170 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1171         struct mlx5_dev_ctx_shared *sh = priv->sh;
1172         char s[MLX5_HLIST_NAMESIZE];
1173
1174         MLX5_ASSERT(sh);
1175         snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
1176         sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
1177                                           0, 0, flow_dv_tbl_create_cb,
1178                                           flow_dv_tbl_match_cb,
1179                                           flow_dv_tbl_remove_cb);
1180         if (!sh->flow_tbls) {
1181                 DRV_LOG(ERR, "flow tables with hash creation failed.");
1182                 err = ENOMEM;
1183                 return err;
1184         }
1185         sh->flow_tbls->ctx = sh;
1186 #ifndef HAVE_MLX5DV_DR
1187         struct rte_flow_error error;
1188         struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
1189
1190         /*
1191          * In case we have not DR support, the zero tables should be created
1192          * because DV expect to see them even if they cannot be created by
1193          * RDMA-CORE.
1194          */
1195         if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0, NULL, 0, 1, &error) ||
1196             !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0, NULL, 0, 1, &error) ||
1197             !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0, NULL, 0, 1, &error)) {
1198                 err = ENOMEM;
1199                 goto error;
1200         }
1201         return err;
1202 error:
1203         mlx5_free_table_hash_list(priv);
1204 #endif /* HAVE_MLX5DV_DR */
1205 #endif
1206         return err;
1207 }
1208
1209 /**
1210  * Retrieve integer value from environment variable.
1211  *
1212  * @param[in] name
1213  *   Environment variable name.
1214  *
1215  * @return
1216  *   Integer value, 0 if the variable is not set.
1217  */
1218 int
1219 mlx5_getenv_int(const char *name)
1220 {
1221         const char *val = getenv(name);
1222
1223         if (val == NULL)
1224                 return 0;
1225         return atoi(val);
1226 }
1227
1228 /**
1229  * DPDK callback to add udp tunnel port
1230  *
1231  * @param[in] dev
1232  *   A pointer to eth_dev
1233  * @param[in] udp_tunnel
1234  *   A pointer to udp tunnel
1235  *
1236  * @return
1237  *   0 on valid udp ports and tunnels, -ENOTSUP otherwise.
1238  */
1239 int
1240 mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
1241                          struct rte_eth_udp_tunnel *udp_tunnel)
1242 {
1243         MLX5_ASSERT(udp_tunnel != NULL);
1244         if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
1245             udp_tunnel->udp_port == 4789)
1246                 return 0;
1247         if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
1248             udp_tunnel->udp_port == 4790)
1249                 return 0;
1250         return -ENOTSUP;
1251 }
1252
1253 /**
1254  * Initialize process private data structure.
1255  *
1256  * @param dev
1257  *   Pointer to Ethernet device structure.
1258  *
1259  * @return
1260  *   0 on success, a negative errno value otherwise and rte_errno is set.
1261  */
1262 int
1263 mlx5_proc_priv_init(struct rte_eth_dev *dev)
1264 {
1265         struct mlx5_priv *priv = dev->data->dev_private;
1266         struct mlx5_proc_priv *ppriv;
1267         size_t ppriv_size;
1268
1269         /*
1270          * UAR register table follows the process private structure. BlueFlame
1271          * registers for Tx queues are stored in the table.
1272          */
1273         ppriv_size =
1274                 sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
1275         ppriv = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, ppriv_size,
1276                             RTE_CACHE_LINE_SIZE, dev->device->numa_node);
1277         if (!ppriv) {
1278                 rte_errno = ENOMEM;
1279                 return -rte_errno;
1280         }
1281         ppriv->uar_table_sz = priv->txqs_n;
1282         dev->process_private = ppriv;
1283         return 0;
1284 }
1285
1286 /**
1287  * Un-initialize process private data structure.
1288  *
1289  * @param dev
1290  *   Pointer to Ethernet device structure.
1291  */
1292 void
1293 mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
1294 {
1295         if (!dev->process_private)
1296                 return;
1297         mlx5_free(dev->process_private);
1298         dev->process_private = NULL;
1299 }
1300
1301 /**
1302  * DPDK callback to close the device.
1303  *
1304  * Destroy all queues and objects, free memory.
1305  *
1306  * @param dev
1307  *   Pointer to Ethernet device structure.
1308  */
1309 int
1310 mlx5_dev_close(struct rte_eth_dev *dev)
1311 {
1312         struct mlx5_priv *priv = dev->data->dev_private;
1313         unsigned int i;
1314         int ret;
1315
1316         if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1317                 /* Check if process_private released. */
1318                 if (!dev->process_private)
1319                         return 0;
1320                 mlx5_tx_uar_uninit_secondary(dev);
1321                 mlx5_proc_priv_uninit(dev);
1322                 rte_eth_dev_release_port(dev);
1323                 return 0;
1324         }
1325         if (!priv->sh)
1326                 return 0;
1327         DRV_LOG(DEBUG, "port %u closing device \"%s\"",
1328                 dev->data->port_id,
1329                 ((priv->sh->ctx != NULL) ?
1330                 mlx5_os_get_ctx_device_name(priv->sh->ctx) : ""));
1331         /*
1332          * If default mreg copy action is removed at the stop stage,
1333          * the search will return none and nothing will be done anymore.
1334          */
1335         mlx5_flow_stop_default(dev);
1336         mlx5_traffic_disable(dev);
1337         /*
1338          * If all the flows are already flushed in the device stop stage,
1339          * then this will return directly without any action.
1340          */
1341         mlx5_flow_list_flush(dev, &priv->flows, true);
1342         mlx5_shared_action_flush(dev);
1343         mlx5_flow_meter_flush(dev, NULL);
1344         /* Prevent crashes when queues are still in use. */
1345         dev->rx_pkt_burst = removed_rx_burst;
1346         dev->tx_pkt_burst = removed_tx_burst;
1347         rte_wmb();
1348         /* Disable datapath on secondary process. */
1349         mlx5_mp_os_req_stop_rxtx(dev);
1350         /* Free the eCPRI flex parser resource. */
1351         mlx5_flex_parser_ecpri_release(dev);
1352         if (priv->rxqs != NULL) {
1353                 /* XXX race condition if mlx5_rx_burst() is still running. */
1354                 rte_delay_us_sleep(1000);
1355                 for (i = 0; (i != priv->rxqs_n); ++i)
1356                         mlx5_rxq_release(dev, i);
1357                 priv->rxqs_n = 0;
1358                 priv->rxqs = NULL;
1359         }
1360         if (priv->txqs != NULL) {
1361                 /* XXX race condition if mlx5_tx_burst() is still running. */
1362                 rte_delay_us_sleep(1000);
1363                 for (i = 0; (i != priv->txqs_n); ++i)
1364                         mlx5_txq_release(dev, i);
1365                 priv->txqs_n = 0;
1366                 priv->txqs = NULL;
1367         }
1368         mlx5_proc_priv_uninit(dev);
1369         if (priv->q_counters) {
1370                 mlx5_devx_cmd_destroy(priv->q_counters);
1371                 priv->q_counters = NULL;
1372         }
1373         if (priv->drop_queue.hrxq)
1374                 mlx5_drop_action_destroy(dev);
1375         if (priv->mreg_cp_tbl)
1376                 mlx5_hlist_destroy(priv->mreg_cp_tbl);
1377         mlx5_mprq_free_mp(dev);
1378         mlx5_os_free_shared_dr(priv);
1379         if (priv->rss_conf.rss_key != NULL)
1380                 mlx5_free(priv->rss_conf.rss_key);
1381         if (priv->reta_idx != NULL)
1382                 mlx5_free(priv->reta_idx);
1383         if (priv->config.vf)
1384                 mlx5_os_mac_addr_flush(dev);
1385         if (priv->nl_socket_route >= 0)
1386                 close(priv->nl_socket_route);
1387         if (priv->nl_socket_rdma >= 0)
1388                 close(priv->nl_socket_rdma);
1389         if (priv->vmwa_context)
1390                 mlx5_vlan_vmwa_exit(priv->vmwa_context);
1391         ret = mlx5_hrxq_verify(dev);
1392         if (ret)
1393                 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
1394                         dev->data->port_id);
1395         ret = mlx5_ind_table_obj_verify(dev);
1396         if (ret)
1397                 DRV_LOG(WARNING, "port %u some indirection table still remain",
1398                         dev->data->port_id);
1399         ret = mlx5_rxq_obj_verify(dev);
1400         if (ret)
1401                 DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
1402                         dev->data->port_id);
1403         ret = mlx5_rxq_verify(dev);
1404         if (ret)
1405                 DRV_LOG(WARNING, "port %u some Rx queues still remain",
1406                         dev->data->port_id);
1407         ret = mlx5_txq_obj_verify(dev);
1408         if (ret)
1409                 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
1410                         dev->data->port_id);
1411         ret = mlx5_txq_verify(dev);
1412         if (ret)
1413                 DRV_LOG(WARNING, "port %u some Tx queues still remain",
1414                         dev->data->port_id);
1415         ret = mlx5_flow_verify(dev);
1416         if (ret)
1417                 DRV_LOG(WARNING, "port %u some flows still remain",
1418                         dev->data->port_id);
1419         mlx5_cache_list_destroy(&priv->hrxqs);
1420         /*
1421          * Free the shared context in last turn, because the cleanup
1422          * routines above may use some shared fields, like
1423          * mlx5_os_mac_addr_flush() uses ibdev_path for retrieveing
1424          * ifindex if Netlink fails.
1425          */
1426         mlx5_free_shared_dev_ctx(priv->sh);
1427         if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1428                 unsigned int c = 0;
1429                 uint16_t port_id;
1430
1431                 MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
1432                         struct mlx5_priv *opriv =
1433                                 rte_eth_devices[port_id].data->dev_private;
1434
1435                         if (!opriv ||
1436                             opriv->domain_id != priv->domain_id ||
1437                             &rte_eth_devices[port_id] == dev)
1438                                 continue;
1439                         ++c;
1440                         break;
1441                 }
1442                 if (!c)
1443                         claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1444         }
1445         memset(priv, 0, sizeof(*priv));
1446         priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1447         /*
1448          * Reset mac_addrs to NULL such that it is not freed as part of
1449          * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
1450          * it is freed when dev_private is freed.
1451          */
1452         dev->data->mac_addrs = NULL;
1453         return 0;
1454 }
1455
1456 const struct eth_dev_ops mlx5_dev_ops = {
1457         .dev_configure = mlx5_dev_configure,
1458         .dev_start = mlx5_dev_start,
1459         .dev_stop = mlx5_dev_stop,
1460         .dev_set_link_down = mlx5_set_link_down,
1461         .dev_set_link_up = mlx5_set_link_up,
1462         .dev_close = mlx5_dev_close,
1463         .promiscuous_enable = mlx5_promiscuous_enable,
1464         .promiscuous_disable = mlx5_promiscuous_disable,
1465         .allmulticast_enable = mlx5_allmulticast_enable,
1466         .allmulticast_disable = mlx5_allmulticast_disable,
1467         .link_update = mlx5_link_update,
1468         .stats_get = mlx5_stats_get,
1469         .stats_reset = mlx5_stats_reset,
1470         .xstats_get = mlx5_xstats_get,
1471         .xstats_reset = mlx5_xstats_reset,
1472         .xstats_get_names = mlx5_xstats_get_names,
1473         .fw_version_get = mlx5_fw_version_get,
1474         .dev_infos_get = mlx5_dev_infos_get,
1475         .representor_info_get = mlx5_representor_info_get,
1476         .read_clock = mlx5_txpp_read_clock,
1477         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
1478         .vlan_filter_set = mlx5_vlan_filter_set,
1479         .rx_queue_setup = mlx5_rx_queue_setup,
1480         .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
1481         .tx_queue_setup = mlx5_tx_queue_setup,
1482         .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
1483         .rx_queue_release = mlx5_rx_queue_release,
1484         .tx_queue_release = mlx5_tx_queue_release,
1485         .rx_queue_start = mlx5_rx_queue_start,
1486         .rx_queue_stop = mlx5_rx_queue_stop,
1487         .tx_queue_start = mlx5_tx_queue_start,
1488         .tx_queue_stop = mlx5_tx_queue_stop,
1489         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
1490         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
1491         .mac_addr_remove = mlx5_mac_addr_remove,
1492         .mac_addr_add = mlx5_mac_addr_add,
1493         .mac_addr_set = mlx5_mac_addr_set,
1494         .set_mc_addr_list = mlx5_set_mc_addr_list,
1495         .mtu_set = mlx5_dev_set_mtu,
1496         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
1497         .vlan_offload_set = mlx5_vlan_offload_set,
1498         .reta_update = mlx5_dev_rss_reta_update,
1499         .reta_query = mlx5_dev_rss_reta_query,
1500         .rss_hash_update = mlx5_rss_hash_update,
1501         .rss_hash_conf_get = mlx5_rss_hash_conf_get,
1502         .flow_ops_get = mlx5_flow_ops_get,
1503         .rxq_info_get = mlx5_rxq_info_get,
1504         .txq_info_get = mlx5_txq_info_get,
1505         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
1506         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
1507         .rx_queue_intr_enable = mlx5_rx_intr_enable,
1508         .rx_queue_intr_disable = mlx5_rx_intr_disable,
1509         .is_removed = mlx5_is_removed,
1510         .udp_tunnel_port_add  = mlx5_udp_tunnel_port_add,
1511         .get_module_info = mlx5_get_module_info,
1512         .get_module_eeprom = mlx5_get_module_eeprom,
1513         .hairpin_cap_get = mlx5_hairpin_cap_get,
1514         .mtr_ops_get = mlx5_flow_meter_ops_get,
1515         .hairpin_bind = mlx5_hairpin_bind,
1516         .hairpin_unbind = mlx5_hairpin_unbind,
1517         .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
1518         .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
1519         .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
1520         .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
1521 };
1522
1523 /* Available operations from secondary process. */
1524 const struct eth_dev_ops mlx5_dev_sec_ops = {
1525         .stats_get = mlx5_stats_get,
1526         .stats_reset = mlx5_stats_reset,
1527         .xstats_get = mlx5_xstats_get,
1528         .xstats_reset = mlx5_xstats_reset,
1529         .xstats_get_names = mlx5_xstats_get_names,
1530         .fw_version_get = mlx5_fw_version_get,
1531         .dev_infos_get = mlx5_dev_infos_get,
1532         .read_clock = mlx5_txpp_read_clock,
1533         .rx_queue_start = mlx5_rx_queue_start,
1534         .rx_queue_stop = mlx5_rx_queue_stop,
1535         .tx_queue_start = mlx5_tx_queue_start,
1536         .tx_queue_stop = mlx5_tx_queue_stop,
1537         .rxq_info_get = mlx5_rxq_info_get,
1538         .txq_info_get = mlx5_txq_info_get,
1539         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
1540         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
1541         .get_module_info = mlx5_get_module_info,
1542         .get_module_eeprom = mlx5_get_module_eeprom,
1543 };
1544
1545 /* Available operations in flow isolated mode. */
1546 const struct eth_dev_ops mlx5_dev_ops_isolate = {
1547         .dev_configure = mlx5_dev_configure,
1548         .dev_start = mlx5_dev_start,
1549         .dev_stop = mlx5_dev_stop,
1550         .dev_set_link_down = mlx5_set_link_down,
1551         .dev_set_link_up = mlx5_set_link_up,
1552         .dev_close = mlx5_dev_close,
1553         .promiscuous_enable = mlx5_promiscuous_enable,
1554         .promiscuous_disable = mlx5_promiscuous_disable,
1555         .allmulticast_enable = mlx5_allmulticast_enable,
1556         .allmulticast_disable = mlx5_allmulticast_disable,
1557         .link_update = mlx5_link_update,
1558         .stats_get = mlx5_stats_get,
1559         .stats_reset = mlx5_stats_reset,
1560         .xstats_get = mlx5_xstats_get,
1561         .xstats_reset = mlx5_xstats_reset,
1562         .xstats_get_names = mlx5_xstats_get_names,
1563         .fw_version_get = mlx5_fw_version_get,
1564         .dev_infos_get = mlx5_dev_infos_get,
1565         .read_clock = mlx5_txpp_read_clock,
1566         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
1567         .vlan_filter_set = mlx5_vlan_filter_set,
1568         .rx_queue_setup = mlx5_rx_queue_setup,
1569         .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
1570         .tx_queue_setup = mlx5_tx_queue_setup,
1571         .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
1572         .rx_queue_release = mlx5_rx_queue_release,
1573         .tx_queue_release = mlx5_tx_queue_release,
1574         .rx_queue_start = mlx5_rx_queue_start,
1575         .rx_queue_stop = mlx5_rx_queue_stop,
1576         .tx_queue_start = mlx5_tx_queue_start,
1577         .tx_queue_stop = mlx5_tx_queue_stop,
1578         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
1579         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
1580         .mac_addr_remove = mlx5_mac_addr_remove,
1581         .mac_addr_add = mlx5_mac_addr_add,
1582         .mac_addr_set = mlx5_mac_addr_set,
1583         .set_mc_addr_list = mlx5_set_mc_addr_list,
1584         .mtu_set = mlx5_dev_set_mtu,
1585         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
1586         .vlan_offload_set = mlx5_vlan_offload_set,
1587         .flow_ops_get = mlx5_flow_ops_get,
1588         .rxq_info_get = mlx5_rxq_info_get,
1589         .txq_info_get = mlx5_txq_info_get,
1590         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
1591         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
1592         .rx_queue_intr_enable = mlx5_rx_intr_enable,
1593         .rx_queue_intr_disable = mlx5_rx_intr_disable,
1594         .is_removed = mlx5_is_removed,
1595         .get_module_info = mlx5_get_module_info,
1596         .get_module_eeprom = mlx5_get_module_eeprom,
1597         .hairpin_cap_get = mlx5_hairpin_cap_get,
1598         .mtr_ops_get = mlx5_flow_meter_ops_get,
1599         .hairpin_bind = mlx5_hairpin_bind,
1600         .hairpin_unbind = mlx5_hairpin_unbind,
1601         .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
1602         .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
1603         .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
1604         .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
1605 };
1606
1607 /**
1608  * Verify and store value for device argument.
1609  *
1610  * @param[in] key
1611  *   Key argument to verify.
1612  * @param[in] val
1613  *   Value associated with key.
1614  * @param opaque
1615  *   User data.
1616  *
1617  * @return
1618  *   0 on success, a negative errno value otherwise and rte_errno is set.
1619  */
1620 static int
1621 mlx5_args_check(const char *key, const char *val, void *opaque)
1622 {
1623         struct mlx5_dev_config *config = opaque;
1624         unsigned long mod;
1625         signed long tmp;
1626
1627         /* No-op, port representors are processed in mlx5_dev_spawn(). */
1628         if (!strcmp(MLX5_REPRESENTOR, key))
1629                 return 0;
1630         errno = 0;
1631         tmp = strtol(val, NULL, 0);
1632         if (errno) {
1633                 rte_errno = errno;
1634                 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
1635                 return -rte_errno;
1636         }
1637         if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
1638                 /* Negative values are acceptable for some keys only. */
1639                 rte_errno = EINVAL;
1640                 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
1641                 return -rte_errno;
1642         }
1643         mod = tmp >= 0 ? tmp : -tmp;
1644         if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
1645                 if (tmp > MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
1646                         DRV_LOG(ERR, "invalid CQE compression "
1647                                      "format parameter");
1648                         rte_errno = EINVAL;
1649                         return -rte_errno;
1650                 }
1651                 config->cqe_comp = !!tmp;
1652                 config->cqe_comp_fmt = tmp;
1653         } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
1654                 config->hw_padding = !!tmp;
1655         } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
1656                 config->mprq.enabled = !!tmp;
1657         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
1658                 config->mprq.stride_num_n = tmp;
1659         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
1660                 config->mprq.stride_size_n = tmp;
1661         } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
1662                 config->mprq.max_memcpy_len = tmp;
1663         } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
1664                 config->mprq.min_rxqs_num = tmp;
1665         } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
1666                 DRV_LOG(WARNING, "%s: deprecated parameter,"
1667                                  " converted to txq_inline_max", key);
1668                 config->txq_inline_max = tmp;
1669         } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
1670                 config->txq_inline_max = tmp;
1671         } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
1672                 config->txq_inline_min = tmp;
1673         } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
1674                 config->txq_inline_mpw = tmp;
1675         } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
1676                 config->txqs_inline = tmp;
1677         } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
1678                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1679         } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
1680                 config->mps = !!tmp;
1681         } else if (strcmp(MLX5_TX_DB_NC, key) == 0) {
1682                 if (tmp != MLX5_TXDB_CACHED &&
1683                     tmp != MLX5_TXDB_NCACHED &&
1684                     tmp != MLX5_TXDB_HEURISTIC) {
1685                         DRV_LOG(ERR, "invalid Tx doorbell "
1686                                      "mapping parameter");
1687                         rte_errno = EINVAL;
1688                         return -rte_errno;
1689                 }
1690                 config->dbnc = tmp;
1691         } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
1692                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1693         } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
1694                 DRV_LOG(WARNING, "%s: deprecated parameter,"
1695                                  " converted to txq_inline_mpw", key);
1696                 config->txq_inline_mpw = tmp;
1697         } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
1698                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1699         } else if (strcmp(MLX5_TX_PP, key) == 0) {
1700                 if (!mod) {
1701                         DRV_LOG(ERR, "Zero Tx packet pacing parameter");
1702                         rte_errno = EINVAL;
1703                         return -rte_errno;
1704                 }
1705                 config->tx_pp = tmp;
1706         } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
1707                 config->tx_skew = tmp;
1708         } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
1709                 config->rx_vec_en = !!tmp;
1710         } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
1711                 config->l3_vxlan_en = !!tmp;
1712         } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
1713                 config->vf_nl_en = !!tmp;
1714         } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
1715                 config->dv_esw_en = !!tmp;
1716         } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
1717                 config->dv_flow_en = !!tmp;
1718         } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
1719                 if (tmp != MLX5_XMETA_MODE_LEGACY &&
1720                     tmp != MLX5_XMETA_MODE_META16 &&
1721                     tmp != MLX5_XMETA_MODE_META32 &&
1722                     tmp != MLX5_XMETA_MODE_MISS_INFO) {
1723                         DRV_LOG(ERR, "invalid extensive "
1724                                      "metadata parameter");
1725                         rte_errno = EINVAL;
1726                         return -rte_errno;
1727                 }
1728                 if (tmp != MLX5_XMETA_MODE_MISS_INFO)
1729                         config->dv_xmeta_en = tmp;
1730                 else
1731                         config->dv_miss_info = 1;
1732         } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
1733                 config->lacp_by_user = !!tmp;
1734         } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
1735                 config->mr_ext_memseg_en = !!tmp;
1736         } else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
1737                 config->max_dump_files_num = tmp;
1738         } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
1739                 config->lro.timeout = tmp;
1740         } else if (strcmp(MLX5_CLASS_ARG_NAME, key) == 0) {
1741                 DRV_LOG(DEBUG, "class argument is %s.", val);
1742         } else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
1743                 config->log_hp_size = tmp;
1744         } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
1745                 if (tmp != MLX5_RCM_NONE &&
1746                     tmp != MLX5_RCM_LIGHT &&
1747                     tmp != MLX5_RCM_AGGR) {
1748                         DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
1749                         rte_errno = EINVAL;
1750                         return -rte_errno;
1751                 }
1752                 config->reclaim_mode = tmp;
1753         } else if (strcmp(MLX5_SYS_MEM_EN, key) == 0) {
1754                 config->sys_mem_en = !!tmp;
1755         } else if (strcmp(MLX5_DECAP_EN, key) == 0) {
1756                 config->decap_en = !!tmp;
1757         } else {
1758                 DRV_LOG(WARNING, "%s: unknown parameter", key);
1759                 rte_errno = EINVAL;
1760                 return -rte_errno;
1761         }
1762         return 0;
1763 }
1764
1765 /**
1766  * Parse device parameters.
1767  *
1768  * @param config
1769  *   Pointer to device configuration structure.
1770  * @param devargs
1771  *   Device arguments structure.
1772  *
1773  * @return
1774  *   0 on success, a negative errno value otherwise and rte_errno is set.
1775  */
1776 int
1777 mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
1778 {
1779         const char **params = (const char *[]){
1780                 MLX5_RXQ_CQE_COMP_EN,
1781                 MLX5_RXQ_PKT_PAD_EN,
1782                 MLX5_RX_MPRQ_EN,
1783                 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
1784                 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
1785                 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
1786                 MLX5_RXQS_MIN_MPRQ,
1787                 MLX5_TXQ_INLINE,
1788                 MLX5_TXQ_INLINE_MIN,
1789                 MLX5_TXQ_INLINE_MAX,
1790                 MLX5_TXQ_INLINE_MPW,
1791                 MLX5_TXQS_MIN_INLINE,
1792                 MLX5_TXQS_MAX_VEC,
1793                 MLX5_TXQ_MPW_EN,
1794                 MLX5_TXQ_MPW_HDR_DSEG_EN,
1795                 MLX5_TXQ_MAX_INLINE_LEN,
1796                 MLX5_TX_DB_NC,
1797                 MLX5_TX_PP,
1798                 MLX5_TX_SKEW,
1799                 MLX5_TX_VEC_EN,
1800                 MLX5_RX_VEC_EN,
1801                 MLX5_L3_VXLAN_EN,
1802                 MLX5_VF_NL_EN,
1803                 MLX5_DV_ESW_EN,
1804                 MLX5_DV_FLOW_EN,
1805                 MLX5_DV_XMETA_EN,
1806                 MLX5_LACP_BY_USER,
1807                 MLX5_MR_EXT_MEMSEG_EN,
1808                 MLX5_REPRESENTOR,
1809                 MLX5_MAX_DUMP_FILES_NUM,
1810                 MLX5_LRO_TIMEOUT_USEC,
1811                 MLX5_CLASS_ARG_NAME,
1812                 MLX5_HP_BUF_SIZE,
1813                 MLX5_RECLAIM_MEM,
1814                 MLX5_SYS_MEM_EN,
1815                 MLX5_DECAP_EN,
1816                 NULL,
1817         };
1818         struct rte_kvargs *kvlist;
1819         int ret = 0;
1820         int i;
1821
1822         if (devargs == NULL)
1823                 return 0;
1824         /* Following UGLY cast is done to pass checkpatch. */
1825         kvlist = rte_kvargs_parse(devargs->args, params);
1826         if (kvlist == NULL) {
1827                 rte_errno = EINVAL;
1828                 return -rte_errno;
1829         }
1830         /* Process parameters. */
1831         for (i = 0; (params[i] != NULL); ++i) {
1832                 if (rte_kvargs_count(kvlist, params[i])) {
1833                         ret = rte_kvargs_process(kvlist, params[i],
1834                                                  mlx5_args_check, config);
1835                         if (ret) {
1836                                 rte_errno = EINVAL;
1837                                 rte_kvargs_free(kvlist);
1838                                 return -rte_errno;
1839                         }
1840                 }
1841         }
1842         rte_kvargs_free(kvlist);
1843         return 0;
1844 }
1845
1846 /**
1847  * Configures the minimal amount of data to inline into WQE
1848  * while sending packets.
1849  *
1850  * - the txq_inline_min has the maximal priority, if this
1851  *   key is specified in devargs
1852  * - if DevX is enabled the inline mode is queried from the
1853  *   device (HCA attributes and NIC vport context if needed).
1854  * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
1855  *   and none (0 bytes) for other NICs
1856  *
1857  * @param spawn
1858  *   Verbs device parameters (name, port, switch_info) to spawn.
1859  * @param config
1860  *   Device configuration parameters.
1861  */
1862 void
1863 mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
1864                     struct mlx5_dev_config *config)
1865 {
1866         if (config->txq_inline_min != MLX5_ARG_UNSET) {
1867                 /* Application defines size of inlined data explicitly. */
1868                 switch (spawn->pci_dev->id.device_id) {
1869                 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1870                 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1871                         if (config->txq_inline_min <
1872                                        (int)MLX5_INLINE_HSIZE_L2) {
1873                                 DRV_LOG(DEBUG,
1874                                         "txq_inline_mix aligned to minimal"
1875                                         " ConnectX-4 required value %d",
1876                                         (int)MLX5_INLINE_HSIZE_L2);
1877                                 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1878                         }
1879                         break;
1880                 }
1881                 goto exit;
1882         }
1883         if (config->hca_attr.eth_net_offloads) {
1884                 /* We have DevX enabled, inline mode queried successfully. */
1885                 switch (config->hca_attr.wqe_inline_mode) {
1886                 case MLX5_CAP_INLINE_MODE_L2:
1887                         /* outer L2 header must be inlined. */
1888                         config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1889                         goto exit;
1890                 case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
1891                         /* No inline data are required by NIC. */
1892                         config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1893                         config->hw_vlan_insert =
1894                                 config->hca_attr.wqe_vlan_insert;
1895                         DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
1896                         goto exit;
1897                 case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
1898                         /* inline mode is defined by NIC vport context. */
1899                         if (!config->hca_attr.eth_virt)
1900                                 break;
1901                         switch (config->hca_attr.vport_inline_mode) {
1902                         case MLX5_INLINE_MODE_NONE:
1903                                 config->txq_inline_min =
1904                                         MLX5_INLINE_HSIZE_NONE;
1905                                 goto exit;
1906                         case MLX5_INLINE_MODE_L2:
1907                                 config->txq_inline_min =
1908                                         MLX5_INLINE_HSIZE_L2;
1909                                 goto exit;
1910                         case MLX5_INLINE_MODE_IP:
1911                                 config->txq_inline_min =
1912                                         MLX5_INLINE_HSIZE_L3;
1913                                 goto exit;
1914                         case MLX5_INLINE_MODE_TCP_UDP:
1915                                 config->txq_inline_min =
1916                                         MLX5_INLINE_HSIZE_L4;
1917                                 goto exit;
1918                         case MLX5_INLINE_MODE_INNER_L2:
1919                                 config->txq_inline_min =
1920                                         MLX5_INLINE_HSIZE_INNER_L2;
1921                                 goto exit;
1922                         case MLX5_INLINE_MODE_INNER_IP:
1923                                 config->txq_inline_min =
1924                                         MLX5_INLINE_HSIZE_INNER_L3;
1925                                 goto exit;
1926                         case MLX5_INLINE_MODE_INNER_TCP_UDP:
1927                                 config->txq_inline_min =
1928                                         MLX5_INLINE_HSIZE_INNER_L4;
1929                                 goto exit;
1930                         }
1931                 }
1932         }
1933         /*
1934          * We get here if we are unable to deduce
1935          * inline data size with DevX. Try PCI ID
1936          * to determine old NICs.
1937          */
1938         switch (spawn->pci_dev->id.device_id) {
1939         case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1940         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1941         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
1942         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
1943                 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1944                 config->hw_vlan_insert = 0;
1945                 break;
1946         case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
1947         case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
1948         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
1949         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
1950                 /*
1951                  * These NICs support VLAN insertion from WQE and
1952                  * report the wqe_vlan_insert flag. But there is the bug
1953                  * and PFC control may be broken, so disable feature.
1954                  */
1955                 config->hw_vlan_insert = 0;
1956                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1957                 break;
1958         default:
1959                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1960                 break;
1961         }
1962 exit:
1963         DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
1964 }
1965
1966 /**
1967  * Configures the metadata mask fields in the shared context.
1968  *
1969  * @param [in] dev
1970  *   Pointer to Ethernet device.
1971  */
1972 void
1973 mlx5_set_metadata_mask(struct rte_eth_dev *dev)
1974 {
1975         struct mlx5_priv *priv = dev->data->dev_private;
1976         struct mlx5_dev_ctx_shared *sh = priv->sh;
1977         uint32_t meta, mark, reg_c0;
1978
1979         reg_c0 = ~priv->vport_meta_mask;
1980         switch (priv->config.dv_xmeta_en) {
1981         case MLX5_XMETA_MODE_LEGACY:
1982                 meta = UINT32_MAX;
1983                 mark = MLX5_FLOW_MARK_MASK;
1984                 break;
1985         case MLX5_XMETA_MODE_META16:
1986                 meta = reg_c0 >> rte_bsf32(reg_c0);
1987                 mark = MLX5_FLOW_MARK_MASK;
1988                 break;
1989         case MLX5_XMETA_MODE_META32:
1990                 meta = UINT32_MAX;
1991                 mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
1992                 break;
1993         default:
1994                 meta = 0;
1995                 mark = 0;
1996                 MLX5_ASSERT(false);
1997                 break;
1998         }
1999         if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
2000                 DRV_LOG(WARNING, "metadata MARK mask mismatche %08X:%08X",
2001                                  sh->dv_mark_mask, mark);
2002         else
2003                 sh->dv_mark_mask = mark;
2004         if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
2005                 DRV_LOG(WARNING, "metadata META mask mismatche %08X:%08X",
2006                                  sh->dv_meta_mask, meta);
2007         else
2008                 sh->dv_meta_mask = meta;
2009         if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
2010                 DRV_LOG(WARNING, "metadata reg_c0 mask mismatche %08X:%08X",
2011                                  sh->dv_meta_mask, reg_c0);
2012         else
2013                 sh->dv_regc0_mask = reg_c0;
2014         DRV_LOG(DEBUG, "metadata mode %u", priv->config.dv_xmeta_en);
2015         DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
2016         DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
2017         DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
2018 }
2019
2020 int
2021 rte_pmd_mlx5_get_dyn_flag_names(char *names[], unsigned int n)
2022 {
2023         static const char *const dynf_names[] = {
2024                 RTE_PMD_MLX5_FINE_GRANULARITY_INLINE,
2025                 RTE_MBUF_DYNFLAG_METADATA_NAME,
2026                 RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME
2027         };
2028         unsigned int i;
2029
2030         if (n < RTE_DIM(dynf_names))
2031                 return -ENOMEM;
2032         for (i = 0; i < RTE_DIM(dynf_names); i++) {
2033                 if (names[i] == NULL)
2034                         return -EINVAL;
2035                 strcpy(names[i], dynf_names[i]);
2036         }
2037         return RTE_DIM(dynf_names);
2038 }
2039
2040 /**
2041  * Comparison callback to sort device data.
2042  *
2043  * This is meant to be used with qsort().
2044  *
2045  * @param a[in]
2046  *   Pointer to pointer to first data object.
2047  * @param b[in]
2048  *   Pointer to pointer to second data object.
2049  *
2050  * @return
2051  *   0 if both objects are equal, less than 0 if the first argument is less
2052  *   than the second, greater than 0 otherwise.
2053  */
2054 int
2055 mlx5_dev_check_sibling_config(struct mlx5_priv *priv,
2056                               struct mlx5_dev_config *config)
2057 {
2058         struct mlx5_dev_ctx_shared *sh = priv->sh;
2059         struct mlx5_dev_config *sh_conf = NULL;
2060         uint16_t port_id;
2061
2062         MLX5_ASSERT(sh);
2063         /* Nothing to compare for the single/first device. */
2064         if (sh->refcnt == 1)
2065                 return 0;
2066         /* Find the device with shared context. */
2067         MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
2068                 struct mlx5_priv *opriv =
2069                         rte_eth_devices[port_id].data->dev_private;
2070
2071                 if (opriv && opriv != priv && opriv->sh == sh) {
2072                         sh_conf = &opriv->config;
2073                         break;
2074                 }
2075         }
2076         if (!sh_conf)
2077                 return 0;
2078         if (sh_conf->dv_flow_en ^ config->dv_flow_en) {
2079                 DRV_LOG(ERR, "\"dv_flow_en\" configuration mismatch"
2080                              " for shared %s context", sh->ibdev_name);
2081                 rte_errno = EINVAL;
2082                 return rte_errno;
2083         }
2084         if (sh_conf->dv_xmeta_en ^ config->dv_xmeta_en) {
2085                 DRV_LOG(ERR, "\"dv_xmeta_en\" configuration mismatch"
2086                              " for shared %s context", sh->ibdev_name);
2087                 rte_errno = EINVAL;
2088                 return rte_errno;
2089         }
2090         return 0;
2091 }
2092
2093 /**
2094  * Look for the ethernet device belonging to mlx5 driver.
2095  *
2096  * @param[in] port_id
2097  *   port_id to start looking for device.
2098  * @param[in] pci_dev
2099  *   Pointer to the hint PCI device. When device is being probed
2100  *   the its siblings (master and preceding representors might
2101  *   not have assigned driver yet (because the mlx5_os_pci_probe()
2102  *   is not completed yet, for this case match on hint PCI
2103  *   device may be used to detect sibling device.
2104  *
2105  * @return
2106  *   port_id of found device, RTE_MAX_ETHPORT if not found.
2107  */
2108 uint16_t
2109 mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev)
2110 {
2111         while (port_id < RTE_MAX_ETHPORTS) {
2112                 struct rte_eth_dev *dev = &rte_eth_devices[port_id];
2113
2114                 if (dev->state != RTE_ETH_DEV_UNUSED &&
2115                     dev->device &&
2116                     (dev->device == &pci_dev->device ||
2117                      (dev->device->driver &&
2118                      dev->device->driver->name &&
2119                      !strcmp(dev->device->driver->name, MLX5_DRIVER_NAME))))
2120                         break;
2121                 port_id++;
2122         }
2123         if (port_id >= RTE_MAX_ETHPORTS)
2124                 return RTE_MAX_ETHPORTS;
2125         return port_id;
2126 }
2127
2128 /**
2129  * DPDK callback to remove a PCI device.
2130  *
2131  * This function removes all Ethernet devices belong to a given PCI device.
2132  *
2133  * @param[in] pci_dev
2134  *   Pointer to the PCI device.
2135  *
2136  * @return
2137  *   0 on success, the function cannot fail.
2138  */
2139 static int
2140 mlx5_pci_remove(struct rte_pci_device *pci_dev)
2141 {
2142         uint16_t port_id;
2143         int ret = 0;
2144
2145         RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
2146                 /*
2147                  * mlx5_dev_close() is not registered to secondary process,
2148                  * call the close function explicitly for secondary process.
2149                  */
2150                 if (rte_eal_process_type() == RTE_PROC_SECONDARY)
2151                         ret |= mlx5_dev_close(&rte_eth_devices[port_id]);
2152                 else
2153                         ret |= rte_eth_dev_close(port_id);
2154         }
2155         return ret == 0 ? 0 : -EIO;
2156 }
2157
2158 static const struct rte_pci_id mlx5_pci_id_map[] = {
2159         {
2160                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2161                                PCI_DEVICE_ID_MELLANOX_CONNECTX4)
2162         },
2163         {
2164                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2165                                PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
2166         },
2167         {
2168                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2169                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
2170         },
2171         {
2172                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2173                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
2174         },
2175         {
2176                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2177                                PCI_DEVICE_ID_MELLANOX_CONNECTX5)
2178         },
2179         {
2180                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2181                                PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
2182         },
2183         {
2184                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2185                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
2186         },
2187         {
2188                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2189                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
2190         },
2191         {
2192                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2193                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
2194         },
2195         {
2196                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2197                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
2198         },
2199         {
2200                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2201                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6)
2202         },
2203         {
2204                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2205                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
2206         },
2207         {
2208                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2209                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
2210         },
2211         {
2212                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2213                                 PCI_DEVICE_ID_MELLANOX_CONNECTXVF)
2214         },
2215         {
2216                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2217                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
2218         },
2219         {
2220                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2221                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6LX)
2222         },
2223         {
2224                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2225                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7)
2226         },
2227         {
2228                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2229                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7BF)
2230         },
2231         {
2232                 .vendor_id = 0
2233         }
2234 };
2235
2236 static struct mlx5_pci_driver mlx5_driver = {
2237         .driver_class = MLX5_CLASS_NET,
2238         .pci_driver = {
2239                 .driver = {
2240                         .name = MLX5_DRIVER_NAME,
2241                 },
2242                 .id_table = mlx5_pci_id_map,
2243                 .probe = mlx5_os_pci_probe,
2244                 .remove = mlx5_pci_remove,
2245                 .dma_map = mlx5_dma_map,
2246                 .dma_unmap = mlx5_dma_unmap,
2247                 .drv_flags = PCI_DRV_FLAGS,
2248         },
2249 };
2250
2251 /* Initialize driver log type. */
2252 RTE_LOG_REGISTER(mlx5_logtype, pmd.net.mlx5, NOTICE)
2253
2254 /**
2255  * Driver initialization routine.
2256  */
2257 RTE_INIT(rte_mlx5_pmd_init)
2258 {
2259         pthread_mutex_init(&mlx5_dev_ctx_list_mutex, NULL);
2260         mlx5_common_init();
2261         /* Build the static tables for Verbs conversion. */
2262         mlx5_set_ptype_table();
2263         mlx5_set_cksum_table();
2264         mlx5_set_swp_types_table();
2265         if (mlx5_glue)
2266                 mlx5_pci_driver_register(&mlx5_driver);
2267 }
2268
2269 RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
2270 RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
2271 RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");